Search

Front Cover: The responsiveness of polyelectrolyte block copolymers to ionic strength and/or pH allow for tuning the self‐assembly process and the resultant materials properties. As the salt increases, the polymer network can undergo a sharp morphological transition from micellar network to hamburger‐shaped aggregate, which is predicted using dissipative particle dynamics (DPD) simulations and cryogenic transmission electron microscopy (cryo‐TEM) on the example of the self‐assembly of single‐stranded DNA triblocks. Further details can be found in article number 1700422 by Yaroslava G. Yingling* and co‐workers. [ABSTRACT FROM AUTHOR]

Modern materials design strategies take advantage of the increasing amount of materials property data available and increasingly complex algorithms to take advantage of those data. However, viscoelastic materials resist this trend towards increased data rates due to their inherent time-dependent properties. Therefore, viscoelasticity measurements present a roadblock for data collection in an important aspect of material design. For thermorheologically simple (TRS) materials, time-temperature superposition (TTS) made relaxation spectrum measurements faster relative to, for example, very long creep experiments. However, TTS itself currently faces a speed limit originating in the common logarithmic discrete frequency sweep (DFS) mode of operation. In DFS, the measurement time is proportional (by a factor much greater than one) to the lowest frequency of measurement. This state of affairs has not improved for TTS for half a century or more. We utilize recent work in experimental rheometry on windowed chirps to collect three decades of complex modulus data simultaneously, resulting in a ∼500% increase in data collection. In BOTTS, we superpose several isothermal chirp responses to produce a master curve in a fraction of time required by the traditional DFS-TTS technique. The chirp responses have good, albeit nontrivial, signal-to-noise properties. We use linear error propagation and a noise-weighted least squares approach to automatically incorporate all the data into a reliable shifting method. Using model thermoset polymers, we show that DFS-TTS and BOTTS results are comparable, and therefore BOTTS data represent a first step towards a faster method for master curve generation from unmodified rheological measurement instruments.

Synovial fluid lubricates articular joints by forming a hydrated layer between the cartilage surfaces. In degenerative joint diseases like osteoarthritis (OA), the synovial fluid is compromised, which leads to less effective innate lubrication and exacerbated cartilage degeneration. Studies over the years have led to the development of partially or fully synthetic biolubricants to reduce the coefficient of friction with cartilage in knee joints. Cartilage-adhering, hydrated lubricants are particularly important to provide cartilage lubrication and chondroprotection under high normal load and slow speed. Here, we report the development of a hyaluronic acid (HA)-based lubricant functionalized with cationic branched poly-L-lysine (BPL) molecules that bind to cartilage  via  electrostatic interactions. We surmised that the electrostatic interactions between the BPL-modified HA molecules (HA-BPL) and the cartilage facilitate localization of the HA molecules to the cartilage surface. The number of BPL molecules on the HA backbone was varied to determine the optimal grafting density for cartilage binding and HA localization. Collectively, our results show that our HA-BPL molecules adhered readily to cartilage and were effective as a lubricant in cartilage-on-cartilage shear measurements where the modified HA molecules significantly reduce the coefficient of friction compared to phosphate-buffered saline or HA alone. This proof-of-concept study shows how the incorporation of cartilage adhering moieties, such as cationic molecules, can be used to enhance cartilage binding and lubrication properties of HA.

Acoustic gravimetric biosensors attract attention due to their simplicity, robustness, and low cost. However, a prevailing challenge in these sensors is dissipation which manifests in a low quality factor (Q-factor), which limits their sensitivity and accuracy. To mitigate dissipation of acoustic sensors in liquid environments we introduce an innovative approach in which we combine microfluidic channels with gravimetric sensors. To implement this novel paradigm we chose the quartz crystal microbalance (QCM) as our model system, owing to its wide applicability in biosensing and the relevance of its operating principles to other types of acoustic sensors. We postulate that the crucial determinant for enhancing performance lies in the ratio between the width of the microfluidic channels and the wavelength of the pressure wave generated by the oscillating channel side walls driven by the QCM. Our hypothesis is supported by finite element analysis (FEA) and dimensional studies, which revealed two key factors that affect device performance: (1) the ratio of the channel width to the pressure wavelength ( W / λ p ) and (2) the ratio of the channel height to the shear evanescent wavelength ( H / λ s ). To validate our hypothesis, we fabricated a microfluidic QCM (µ-QCM) and demonstrated a remarkable 10-fold improvement in its dissipation when compared to conventional QCM. The novel microfluidic approach offers several additional advantages, such as direct data interpretation, reduced volume requirement for sample liquids, and simplified temperature control, augmenting the sensor's overall performance. By fostering increased sensitivity, accuracy, and ease of operation, our novel paradigm unlocks new possibilities for advancing gravimetric technologies, potentially for biosensing applications., (© 2024. The Author(s).)

DNA origami has been used as biotemplates for growing a range of inorganic materials to create novel organic-inorganic hybrid nanomaterials. Recently, the solution-based silicification of DNA has been used to grow thin silica shells on DNA origami. However, the silicification reaction is sensitive to the reaction conditions and often results in uncontrolled DNA origami aggregation, especially when growth of thicker silica layers is desired. Here, we investigated how site-specifically placed polynucleotide brushes influence the silicification of DNA origami. Our experiments showed that long DNA brushes, in the form of single- or double-stranded DNA, significantly suppress the aggregation of DNA origami during the silicification process. Furthermore, we found that double-stranded DNA brushes selectively promote silica growth on DNA origami surfaces. These observations were supported and explained by coarse-grained molecular dynamics simulations. This work provides new insights into our understanding of the silicification process on DNA and provides a powerful toolset for the development of novel DNA-based organic-inorganic nanomaterials.

We report a targeted prodrug delivery platform that can deliver a cytostatic nucleobase analog with high drug loading. We chose fluorouracil (5FU), a drug used to treat various cancers, whose active metabolite 5-fluorodeoxyuridine monophosphate (5-FdUMP) is the antineoplastic agent. We use terminal deoxynucleotidyl transferase (TdT) to polymerize 5-fluorodeoxyuridine triphosphate (5-FdUTP) onto the 3'-end of an aptamer. We find that (i) addition of hydrophobic, unnatural nucleotides at the 3'-end of the 5-FdU polynucleotide by TdT leads to their spontaneous self-assembly into nuclease resistant micelles, (ii) aptamers presented on the micelle corona retain specificity for their cognate receptor on tumor cells, and (iii) the micelles deliver 5FU to tumor cells and exhibit greater cytotoxicity than the free drug. The modular design of our platform, consisting of a targeting moiety, a polynucleotide drug, and a self-assembly domain, can be adapted to encompass a range of polymerizable therapeutic nucleotides and targeting units.

DNA nanotechnology provides an approach to create precise, tunable, and biocompatible nanostructures for biomedical applications. However, the stability of these structures is severely compromised in biological milieu due to their fast degradation by nucleases. Recently, we showed how enzymatic polymerization could be harnessed to grow polynucleotide brushes of tunable length and location on the surface of DNA origami nanostructures, which greatly enhances their nuclease stability. Here, we report on strategies that allow for both spatial and temporal control over polymerization through activatable initiation, cleavage, and regeneration of polynucleotide brushes using restriction enzymes. The ability to site-specifically decorate DNA origami nanostructures with polynucleotide brushes in a spatiotemporally controlled way provides access to "smart" functionalized DNA architectures with potential applications in drug delivery and supramolecular assembly., (© 2023 Wiley-VCH GmbH.)

Joint diseases, such as osteoarthritis, often require delivery of drugs to chondrocytes residing within the cartilage. However, intra-articular delivery of drugs to cartilage remains a challenge due to their rapid clearance within the joint. This problem is further exacerbated by the dense and negatively charged cartilage extracellular matrix (ECM). Cationic nanocarriers that form reversible electrostatic interactions with the anionic ECM can be an effective approach to overcome the electrostatic barrier presented by cartilage tissue. For an effective therapeutic outcome, the nanocarriers need to penetrate, accumulate, and be retained within the cartilage tissue. Nanocarriers that adhere quickly to cartilage tissue after intra-articular administration, transport through cartilage, and remain within its full thickness are crucial to the therapeutic outcome. To this end, we used ring-opening polymerization to synthesize branched poly(l-lysine) (BPL) cationic nanocarriers with varying numbers of poly(lysine) branches, surface charge, and functional groups, while maintaining similar hydrodynamic diameters. Our results show that the multivalent BPL molecules, including those that are highly branched (i.e., generation two), can readily adhere and transport through the full thickness of cartilage, healthy and degenerated, with prolonged intra-cartilage retention. Intra-articular injection of the BPL molecules in mouse knee joint explants and rat knee joints showed their localization and retention. In summary, this study describes an approach to design nanocarriers with varying charge and abundant functional groups while maintaining similar hydrodynamic diameters to aid the delivery of macromolecules to negatively charged tissues., Competing Interests: The authors have no conflicts of interest to declare., (© 2023 The Authors. Bioengineering & Translational Medicine published by Wiley Periodicals LLC on behalf of American Institute of Chemical Engineers.)

Cells throughout the human body detect mechanical forces. While it is known that the rapid (millisecond) detection of mechanical forces is mediated by force-gated ion channels, a detailed quantitative understanding of cells as sensors of mechanical energy is still lacking. Here, we combine atomic force microscopy with patch-clamp electrophysiology to determine the physical limits of cells expressing the force-gated ion channels (FGICs) Piezo1, Piezo2, TREK1, and TRAAK. We find that, depending on the ion channel expressed, cells can function either as proportional or nonlinear transducers of mechanical energy and detect mechanical energies as little as ~100 fJ, with a resolution of up to ~1 fJ. These specific energetic values depend on cell size, channel density, and cytoskeletal architecture. We also make the surprising discovery that cells can transduce forces either nearly instantaneously (<1 ms) or with a substantial time delay (~10 ms). Using a chimeric experimental approach and simulations, we show how such delays can emerge from channel-intrinsic properties and the slow diffusion of tension in the membrane. Overall, our experiments reveal the capabilities and limits of cellular mechanosensing and provide insights into molecular mechanisms that different cell types may employ to specialize for their distinct physiological roles.

We studied the directed self-assembly of two types of complementary single-stranded DNA (ssDNA) strands [i.e., poly(dA) and poly(dT)] into more complex, organized, and percolating networks in dilute solutions and at surfaces. Understanding ssDNA self-assembly into 2D networks on surfaces is important for the use of such networks in the fabrication of well-defined nanotechnological devices, as, for instance, required in nanoelectronics or for biosensing. To control the formation of 2D networks on surfaces, it is important to know whether DNA assemblies are formed already in dilute solutions or only during the drying/immobilization process at the surface, where the concentration automatically increases. Fluorescence cross-correlation spectroscopy clearly shows the presence of larger DNA complexes in mixed poly(dA) and poly(dT) solutions already at very low DNA concentrations (<1 nM), that is, well below the overlap concentration. Here, we describe for the first time such supramolecular complexes in solution and how their structure depends on the ssDNA length and concentration and ionic strength. Hence, future attempts to control such networks should also focus on network precursors in solution and not only on their immobilization on surfaces.

Convergent advances in the field of soft matter, macromolecular chemistry, and engineering have led to the development of biomaterials that possess autonomous, adaptive, and self-healing characteristics similar to living systems. These rationally designed biomaterials can surpass the capabilities of their parent material. Herein, the modification of hyaluronic acid (HA) to exhibit self-healing properties is described, and its physical and biological function both in vitro and in vivo is studied. The in vitro findings showed that self-healing HA designed to undergo self-repair improves lubrication, enhances free radical scavenging, and attenuates enzymatic degradation compared to unmodified HA. Longitudinal imaging following intraarticular injection of self-healing HA shows improved in vivo retention despite its low molecular weight. Concomitant with these functions, intraarticular injection of self-healing HA mitigates anterior cruciate ligament injury-mediated cartilage degeneration in rodents. This proof-of-concept study shows how incorporation of functional properties such as self-healing can be used to surpass the existing capabilities of biolubricants., (© 2021 Wiley-VCH GmbH.)

Combining surface-initiated, TdT (terminal deoxynucleotidyl transferase) catalyzed enzymatic polymerization (SI-TcEP) with precisely engineered DNA origami nanostructures (DONs) presents an innovative pathway for the generation of stable, polynucleotide brush-functionalized DNA nanostructures. We demonstrate that SI-TcEP can site-specifically pattern DONs with brushes containing both natural and non-natural nucleotides. The brush functionalization can be precisely controlled in terms of the location of initiation sites on the origami core and the brush height and composition. Coarse-grained simulations predict the conformation of the brush-functionalized DONs that agree well with the experimentally observed morphologies. We find that polynucleotide brush-functionalization increases the nuclease resistance of DONs significantly, and that this stability can be spatially programmed through the site-specific growth of polynucleotide brushes. The ability to site-specifically decorate DONs with brushes of natural and non-natural nucleotides provides access to a large range of functionalized DON architectures that would allow for further supramolecular assembly, and for potential applications in smart nanoscale delivery systems., (© 2021 Wiley-VCH GmbH.)

Diblock copolymers are valued for their ability to form thin films with nanoscale features that typically reflect those of their microphase-separated structures in concentrated solution. Here, we show that such self-assembled structures can be easily formed with diblock copolymers composed of thermally responsive polypeptides, such as resilin-like polypeptides (RLP) and elastin-like polypeptides (ELP), by exploiting the inverse temperature transition behavior of ELPs in aqueous media. Specifically, we examine the self-assembly of a series of RLP- b -ELP diblock copolypeptides in concentrated aqueous solution (30 and 50 wt %) by small-angle X-ray scattering (SAXS). By systematically varying RLP block length and temperature (10-45 °C), we observed microphase separation into hexagonally packed cylinders and lamellae. By analyzing the observed order-order transitions (OOT) and order-disorder transitions (ODT), we determined that self-assembly in this system is primarily driven by polymer-solvent interactions. While these thermally responsive polymers showed clear ODTs and OOTs at certain temperatures, temperature only had a weak effect on the spacing of the resulting nanostructures. In contrast, we found that nanostructure spacing was far more sensitive to RLP block length. Finally, we used atomic force microscopy (AFM) to demonstrate that spin casting RLP- b -ELP diblock copolypeptides also produce nanostructured thin films with spacings that correlate with those in concentrated solution.

We describe the preparation of a poly(acrylic acid) (PAA) brush, polymerized by atom transfer radical polymerization (ATRP) of tert -butyl acrylate ( t BA) and subsequent acid hydrolysis, on the flat gold surfaces of quartz-crystal microbalance (QCM) crystals. The PAA brushes were characterized by Fourier transform infrared (FT-IR) spectroscopy, ellipsometry and water contact angle analysis. The interaction of the PAA brushes with human serum albumin (HSA) was studied for a range of ionic strengths and pH conditions by quartz-crystal microbalance with dissipation monitoring (QCM-D). The quantitative analysis showed a strong adsorption of protein molecules onto the PAA brush. By increasing the ionic strength, we were able to release a fraction of the initially bound HSA molecules. This finding highlights the importance of counterions in the polyelectrolyte-mediated protein adsorption/desorption. A comparison with recent calorimetric studies related to the binding of HSA to polyelectrolytes allowed us to fully analyze the QCM data based on the results of the thermodynamic analysis of the binding process.

Peptide nanofibers are useful for many biological applications, including immunotherapy, tissue engineering, and drug delivery. The robust lengthwise assembly of these peptides into nanofibers is typically difficult to control, resulting in polydisperse fiber lengths and an incomplete understanding of how nanofiber length affects biological responses. Here, rationally designed capping peptides control the length of helical peptide nanofibers with unique precision. These designed peptides bind the tips of elongated nanofibers to shorten and narrow their length distributions. Demonstrating their use as immunotherapies, capped nanofibers are preferentially cross-presented by dendritic cells compared to uncapped nanofibers. Due to increased cross-presentation, these capped nanofibers trigger stronger CD8 + T-cell responses in mice than uncapped nanofibers. This strategy illustrates a means for controlling the length of supramolecular peptide nanofibers to modulate their immunogenicity in the context of immunotherapies., (© 2020 Wiley-VCH GmbH.)

Sensors based on two-dimensional (2D) field-effect transistors (FETs) are extremely sensitive and can detect charged analytes with attomolar limits of detection (LOD). Despite some impressive LODs, the operating mechanisms and factors that determine the signal-to-noise ratio in 2D FET-based sensors remain poorly understood. These uncertainties, coupled with an expansive design space for sensor layout and analyte positioning, result in a field with many reported highlights but limited collective progress. Here, we provide insight into sensing mechanisms of 2D molybdenum disulfide (MoS 2 ) FETs by realizing precise control over the position and charge of an analyte using a customized atomic force microscope (AFM), with the AFM tip acting as an analyte. The sensitivity of the MoS 2 FET channel is revealed to be nonuniform, manifesting sensitive hotspots with locations that are stable over time. When the charge of the analyte is varied, an asymmetry is observed in the device drain-current response, with analytes acting to turn the device off leading to a 2.5× increase in the signal-to-noise ratio (SNR). We developed a numerical model, applicable to all FET-based charge-detection sensors, that confirms our experimental observation and suggests an underlying mechanism. Further, extensive characterization of a set of different MoS 2 FETs under various analyte conditions, coupled with the numerical model, led to the identification of three distinct SNRs that peak with dependence on the layout and operating conditions used for a sensor. These findings reveal the important role of analyte position and coverage in determining the optimal operating bias conditions for maximal sensitivity in 2D FET-based sensors, which provides key insights for future sensor design and control.

Specifically adsorbed bottlebrush coatings are found in nature as brush-like glycoproteins that decorate biointerfaces and provide antifouling, lubrication, or wear-protection. Although various synthetic strategies have been developed to mimic glycoprotein structure and function, the use of these mimics is still limited because of the current lack of understanding of their adsorption behavior and surface conformation. In this paper, we examine the adsorption behavior of PEG-based, biotinylated bottlebrushes with different backbone and bristle lengths to streptavidin model surfaces in phosphate-buffered saline. By using quartz crystal microbalance, localized surface plasmon resonance, and atomic force microscopy, we learn how bottlebrush dimensions impact their adsorption kinetics, surface conformation, mechanical properties, and antifouling properties. Our bottlebrushes qualitatively mirror the adsorption behavior of linear polymers and exhibit three kinetic regimes of adsorption: (I) a transport-limited regime, (II) a pause, and (III) a penetration-limited regime. Furthermore, we find that the bristle length more dramatically affects brush properties than the backbone length. Generally, larger bottlebrush dimensions lead to reduced molar adsorption, retarded kinetics, weaker antifouling, and softer brush coatings. Longer bristles also lead to less mass adsorption, while the opposite trend is observed for increasing backbone length. In summary, our findings aid the rational design of new bottlebrush coatings by elucidating how their dimensions impact adsorption, surface conformation, and the properties of the final coating.

The development of stretchable electronics requires the invention of compatible high-performance power sources, such as stretchable supercapacitors and batteries. In this work, two-dimensional (2D) titanium carbide (Ti 3 C 2 T x ) MXene is being explored for flexible and printed energy storage devices by fabrication of a robust, stretchable high-performance supercapacitor with reduced graphene oxide (RGO) to create a composite electrode. The Ti 3 C 2 T x /RGO composite electrode combines the superior electrochemical and mechanical properties of Ti 3 C 2 T x and the mechanical robustness of RGO resulting from strong nanosheet interactions, larger nanoflake size, and mechanical flexibility. It is found that the Ti 3 C 2 T x /RGO composite electrodes with 50 wt % RGO incorporated prove to mitigate cracks generated under large strains. The composite electrodes exhibit a large capacitance of 49 mF/cm 2 (∼490 F/cm 3 and ∼140 F/g) and good electrochemical and mechanical stability when subjected to cyclic uniaxial (300%) or biaxial (200% × 200%) strains. The as-assembled symmetric supercapacitor demonstrates a specific capacitance of 18.6 mF/cm 2 (∼90 F/cm 3 and ∼29 F/g) and a stretchability of up to 300%. The developed approach offers an alternative strategy to fabricate stretchable MXene-based energy storage devices and can be extended to other members of the large MXene family.

The controllable production of microparticles with complex geometries is useful for a variety of applications in materials science and bioengineering. The formation of intricate microarchitectures typically requires sophisticated fabrication techniques such as flow lithography or multiple-emulsion microfluidics. By harnessing the molecular interactions of a set of artificial intrinsically disordered proteins (IDPs), we have created complex microparticle geometries, including porous particles, core-shell and hollow shell structures, and a unique 'fruits-on-a-vine' arrangement, by exploiting the metastable region of the phase diagram of thermally responsive IDPs within microdroplets. Through multi-site unnatural amino acid (UAA) incorporation, these protein microparticles can also be photo-crosslinked and stably extracted to an all-aqueous environment. This work expands the functional utility of artificial IDPs as well as the available microarchitectures of this class of biocompatible IDPs, with potential applications in drug delivery and tissue engineering.

Understanding of how to integrate DNA molecules with graphene materials is important for the development of biosensors and biomolecular logic circuits. For some of these applications, controlling DNA structural conformation on the graphene substrate is critically important and can be achieved through the use of self-assembled monolayers. Here, we performed all-atom molecular dynamics simulations to understand how various 1-octadecylamine (ODA) coatings of the graphene surface affect the conformation of double-stranded DNA (dsDNA) on the surface. The simulation results demonstrated that dsDNA structures become more stable as ODA concentration increases due to the formation of DNA-ODA hydrogen bonds and reduction of DNA-surface interactions, which aid in retaining internal DNA interactions. Specifically, the interaction of ODA molecules with DNA prevents nucleobases from forming π-π stacking interactions with the surface. Some dsDNA conformations, such as sharp kinks or unwinding, can occur more frequently in DNA with A-T sequences due to weaker pairing interactions than with G-C sequences. Furthermore, our results conclude that both DNA sequence and ODA concentration play an essential role in experimentally observed conformational changes of DNA on the graphene surface.

Many approaches have been developed to characterize cell elasticity. Among these, atomic force microscopy (AFM) combined with modeling has been widely used to characterize cellular compliance. However, such approaches are often limited by the difficulties associated with using a specific instrument and by the complexity of analyzing the measured data. More recently, quantitative phase imaging (QPI) has been applied to characterize cellular stiffness by using an effective spring constant. This metric was further correlated to mass distribution (disorder strength) within the cell. However, these measurements are difficult to compare to AFM-derived measurements of Young's modulus. Here, we describe, to our knowledge, a new way of analyzing QPI data to directly retrieve the shear modulus. Our approach enables label-free measurement of cellular mechanical properties that can be directly compared to values obtained from other rheological methods. To demonstrate the technique, we measured shear modulus and phase disorder strength using QPI, as well as Young's modulus using AFM, across two breast cancer cell-line populations dosed with three different concentrations of cytochalasin D, an actin-depolymerizing toxin. Comparison of QPI-derived and AFM moduli shows good agreement between the two measures and further agrees with theory. Our results suggest that QPI is a powerful tool for cellular biophysics because it allows for optical quantitative measurements of cell mechanical properties., (Copyright © 2019 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Polymer brush coatings are frequently prepared by radical polymerization, a notoriously oxygen sensitive process. Glucose oxidase (GOx) can inexpensively enable radical polymerization in solution by enzymatically consuming oxygen as it oxidizes glucose. Here, we report the growth of polymeric brushes using GOx-assisted atom transfer radical polymerization (ATRP) from a surface while open to air. Specifically, we grew a set of biomedically relevant polymer brushes, including poly(oligo(ethylene glycol) methacrylate) (POEGMA), poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), poly(sulfobetaine methacrylate) (PSBMA), and poly(2-(methylsulfinyl)ethyl acrylate (PMSEA). For each of these polymers, we monitored GOx-assisted and GOx-free ATRP reaction kinetics in real time using quartz crystal microbalance (QCM) and verified findings with localized surface plasmon resonance (LSPR). We modeled brush growth kinetics considering bimolecular termination. This model fit our data well ( r 2 > 0.987 for all samples) and shows the addition of GOx increased effective kinetic chain lengths, propagation rates, and reproducibility. We tested the antifouling properties of the polymer brush coatings against human blood plasma and were surprised to find that coatings prepared with GOx repelled more plasma proteins in all cases than their GOx-free counterparts.

The recognition that nucleic acids can be used as polymeric materials led to the blossoming of the field of DNA nanotechnology, with a broad range of applications in biotechnology, biosensors, diagnostics, and drug delivery. These applications require efficient methods to synthesize and chemically modify high molecular weight DNA. Here, we discuss terminal deoxynucleotidyl transferase (TdT)-catalyzed enzymatic polymerization (TcEP) as an alternative to conventional enzymatic and solid-phase DNA synthesis. We describe biochemical requirements for TcEP and provide step-by-step protocols to carry out TcEP in solution and from surfaces., (© 2019 Elsevier Inc. All rights reserved.)

Introduction: Despite significant progress in the field of oncology, cancer remains one of the leading causes of death. Chemotherapy is one of the most common treatment options for cancer patients but is well known to result in off-target toxicity. Theranostic nanomedicines that integrate diagnostic and therapeutic functions within an all-in-one platform can increase tumor selectivity for more effective chemotherapy and aid in diagnosis and monitoring of therapeutic responses., Material and Methods: In this work, theranostic nanoparticles were synthesized with commonly used biocompatible and biodegradable polymers and used as cancer contrast and therapeutic agents for optical imaging and treatment of breast cancer. These core-shell nanoparticles were prepared by nanoprecipitation of blends of the biodegradable and biocompatible amphiphilic copolymers poly(lactic- co -glycolic acid)- b -poly-l-lysine and poly(lactic acid)- b -poly(ethylene glycol). Poly-l-lysine in the first copolymer was covalently decorated with near-infrared fluorescent Alexa Fluor 750 molecules., Results: The spherical nanoparticles had an average size of 60-80 nm. The chemotherapeutic drug doxorubicin was encapsulated in the core of nanoparticles at a loading of 3% (w:w) and controllably released over a period of 30 days. A 33-fold increase in near-infrared fluorescence, mediated by protease-mediated cleavage of the Alexa Fluor 750-labeled poly-l-lysine on the surface of the nanoparticles, was observed upon interaction with the model protease trypsin. The cytocompatibility of drug-free nanoparticles and growth inhibition of drug-loaded nanoparticles on MDA-MB-231 breast cancer cells were investigated with a luminescence cell-viability assay. Drug-free nanoparticles were found to cause minimal toxicity, even at high concentrations (0.2-2,000 µg/mL), while doxorubicin-loaded nanoparticles significantly reduced cell viability at drug concentrations >10 µM. Finally, the interaction of the nanoparticles with breast cancer cells was studied utilizing fluorescence microscopy, demonstrating the potential of the nanoparticles to act as near-infrared fluorescence optical imaging agents and drug-delivery carriers., Conclusion: Doxorubicin-loaded, enzymatically activatable nanoparticles of less than 100 nm were prepared successfully by nanoprecipitation of copolymer blends. These nanoparticles were found to be suitable as controlled drug delivery systems and contrast agents for imaging of cancer cells., Competing Interests: Disclosure The authors report no conflicts of interest in this work.

Advances in biosensors and drug delivery are dependent on hydrogels that respond to external stimuli. In this work, we describe the preparation and characterization of photoresponsive hydrogels prepared by cross-linking of di-NHS ester of azobenzoic acid and four-armed, amine-terminated poly(ethylene glycol). The porous structure and composition of the hydrogels were confirmed by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The reversible photoisomerization of the azobenzene-containing hydrogel cross-linkers in the gels was confirmed by absorption spectroscopy. Specifically, the photoisomerization of the cross-linkers between their trans and cis configurations was observed by monitoring the absorbance of the hydrogels at the two characteristic peaks of azobenzene (π-π* at 330 nm and n-π* at 435 nm). The effect of photoisomerization on the hydrogel structure was investigated by microscopy. Ultraviolet (UV) irradiation-induced reduction in hydrogel size was observed, which may be a result of the inherently smaller footprint of the cis azobenzene conformation, as well as dipole-dipole interactions between the polar cis azobenzene and the polymer network. The UV-triggered reduction in hydrogel size was accompanied by enhanced release of the near-infrared fluorescent dye Alexa Fluor 750 (AF 750 ). Enhanced release of AF 750 was observed in samples irradiated with UV versus dark control. Together, these data demonstrate the potential of these systems as reversible photoresponsive biomaterials.

Proteoglycans are important brush-like biomacromolecules, which serve a variety of functions in the human body. While protein-bottlebrush hybrids are promising proteoglycan mimics, many challenges still exist to robustly produce such polymers. In this paper, we report the modular synthesis of protein-brush hybrids containing elastin-like polypeptides (ELP) as model proteins by copper-catalyzed azide-alkyne cycloaddition. We exploit the recently discovered imidazole-1-sulfonyl azide (ISA) in a diazotransfer reaction to introduce an N-terminal azide onto an ELP. Next, we use a click reaction to couple the azido-ELP to an alkyne-terminated amine-rich polymer followed by a second diazotransfer step to produce an azide-rich backbone that serves as a scaffold. Finally, we used a second click reaction to graft alkyne-terminated poly(oligoethylene glycol methacrylate) (POEGMA) bristles to the azide-rich backbone to produce the final protein-bottlebrush hybrid. We demonstrate the effectiveness of this synthetic path at each step through careful characterization with 1 H NMR, FTIR, GPC, and diagnostic test reactions on SDS-PAGE. Final reaction products could be consistently obtained for a variety of different molecular weight backbones with final total grafting efficiencies around 70%. The high-yielding reactions employed in this highly modular approach allow for the synthesis of protein-bottlebrush hybrids with different proteins and brush polymers. Additionally, the mild reaction conditions used have the potential to avoid damage to proteins during synthesis.

We synthesized long, nucleobase-modified, single-stranded DNA (ssDNA) using terminal deoxynucleotidyl transferase (TdT) enzymatic polymerization. Specifically, we investigated the effect of unnatural nucleobase size and incorporation density on ssDNA resistance to exo- and endonuclease degradation. We discovered that increasing the size and density of unnatural nucleobases enhances ssDNA resistance to degradation in the presence of exonuclease I, DNase I, and human serum. We also studied the mechanism of this resistance enhancement using molecular dynamics simulations. Our results show that the presence of unnatural nucleobases in ssDNA decreases local chain flexibility and hampers nuclease access to the ssDNA backbone, which hinders nuclease binding to ssDNA and slows its degradation. Our discoveries suggest that incorporating nucleobase-modified nucleotides into ssDNA, using enzymatic polymerization, is an easy and efficient strategy to prolong and tune the half-life of DNA-based materials in nucleases-containing environments.

Candida albicans is a leading cause of catheter-associated urinary tract infections and elimination of these biofilm-based infections without antifungal agents would constitute a significant medical advance. A novel urinary catheter prototype that utilizes on-demand surface deformation is effective at eliminating bacterial biofilms and here the broader applicability of this prototype to remove fungal biofilms has been demonstrated. C. albicans biofilms were debonded from prototypes by selectively inflating four additional intralumens surrounding the main lumen of the catheters to provide the necessary surface strain to remove the adhered biofilm. Deformable catheters eliminated significantly more biofilm than the controls (>90% eliminated vs 10% control; p < 0.001). Mechanical testing revealed that fungal biofilms have an elastic modulus of 45 ± 6.7 kPa with a fracture energy of 0.4-2 J m -2 . This study underscores the potential of mechanical disruption as a materials design strategy to combat fungal device-associated infections.

Retinol, a derivative of vitamin A, is a ubiquitous compound used to treat acne, reduce wrinkles and protect against conditions like psoriasis and ichthyosis. While retinol is used as the primary active ingredient (AI) in many skin care formulations, its efficacy is often limited by an extreme sensitivity to degrade and toxicity at high concentrations. While microencapsulation is an appealing method to help overcome these issues, few microencapsulation strategies have made a major translational impact due to challenges with complexity, cost, limited protection of the AI and poor control of the release of the AI. We have developed a class of silicone particles that addresses these challenges for the encapsulation, protection and controlled release of retinol and other hydrophobic compounds. The particles are prepared by the sol-gel polymerization of silane monomers, which enables their rapid and facile synthesis at scale while maintaining a narrow size distribution (i.e., CV < 20%). We show that our particles can: (i) encapsulate retinol with high efficiency (>85%), (ii) protect retinol from degradation (yielding a half-life 9× greater than unencapsulated retinol) and (iii) slowly release retinol over several hours (at rates from 0.14 to 0.67 μg cm -2  s -1/2 ). To demonstrate that the controlled release of retinol from the particles can reduce irritation, we performed a double blind study on human subjects and found that formulations containing our particles were 12-23% less irritating than identical formulations containing Microsponge® particles (an industry standard by Amcol, Inc.). To show that the silicone particles can elicit a favorable biological response, similar to the Microsponge® particles, we applied both formulations to reconstructed human epidermal tissues and found an upregulation of keratin 19 (K19) and a downregulation of K10, indicating that the reduced irritation observed in the human study was not caused by reduced activity. We also found a decrease in the production of interleukin-1α (IL-1α) compared to formulations containing the Microsponge particles, suggesting lower irritation levels and supporting the findings from the human study. Finally, we show that the silicone particles can encapsulate other AIs, including betamethasone, N, N-diethyl-meta-toluamide (DEET), homosalate and ingenol mebutate, establishing these particles as a true platform technology., (Copyright © 2018. Published by Elsevier B.V.)

A powerful tool for controlling interfacial properties and molecular architecture relies on the tailored adsorption of stimuli-responsive block copolymers onto surfaces. Here, we use computational and experimental approaches to investigate the adsorption behavior of thermally responsive polypeptide block copolymers (elastin-like polypeptides, ELPs) onto silica surfaces, and to explore the effects of surface affinity and micellization on the adsorption kinetics and the resultant polypeptide layers. We demonstrate that genetic incorporation of a silica-binding peptide (silaffin R5) results in enhanced adsorption of these block copolymers onto silica surfaces as measured by quartz crystal microbalance and ellipsometry. We find that the silaffin peptide can also direct micelle adsorption, leading to close-packed micellar arrangements that are distinct from the sparse, patchy arrangements observed for ELP micelles lacking a silaffin tag, as evidenced by atomic force microscopy measurements. These experimental findings are consistent with results of dissipative particle dynamics simulations. Wettability measurements suggest that surface immobilization hampers the temperature-dependent conformational change of ELP micelles, while adsorbed ELP unimers (i.e., unmicellized block copolymers) retain their thermally responsive property at interfaces. These observations provide guidance on the use of ELP block copolymers as building blocks for fabricating smart surfaces and interfaces with programmable architecture and functionality.

The emerging field of biofabrication capitalizes on nature's ability to create materials with a wide range of well-defined physical and electronic properties. Particularly, there is a current push to utilize programmed, self-organization of living cells for material fabrication. However, much research is still necessary at the interface of synthetic biology and materials engineering to make biofabrication a viable technique to develop functional devices. Here, the authors exploit the ability of Escherichia coli to contribute to material fabrication by designing and optimizing growth platforms to direct inorganic nanoparticle (NP) synthesis, specifically cadmium sulfide (CdS) NPs, onto porous polycarbonate membranes. Additionally, current, nonbiological, chemical synthesis methods for CdS NPs are typically energy intensive and use high concentrations of hazardous cadmium precursors. Using biosynthesis methods through microorganisms could potentially alleviate these issues by precipitating NPs with less energy and lower concentrations of toxic precursors. The authors adopted extracellular precipitation strategies to form CdS NPs on the membranes as bacterial/membrane composites and characterized them by spectroscopic and imaging methods, including energy dispersive spectroscopy, and scanning and transmission electron microscopy. This method allowed us to control the localization of NP precipitation throughout the layered bacterial/membrane composite, by varying the timing of the cadmium precursor addition. Additionally, the authors demonstrated the photodegradation of methyl orange using the CdS functionalized porous membranes, thus confirming the photocatalytic properties of these composites for eventual translation to device development. If combined with the genetically programmed self-organization of cells, this approach promises to directly pattern CdS nanostructures on solid supports.

Hydrogel particles are versatile materials that provide exquisite, tunable control over the sequestration and delivery of materials in pharmaceutics, tissue engineering, and photonics. The favorable properties of hydrogel particles depend largely on their size, and particles ranging from nanometers to micrometers are used in different applications. Previous studies have only successfully fabricated these particles in one specific size regime and required a variety of materials and fabrication methods. A simple yet powerful system is developed to easily tune the size of polypeptide-based, thermoresponsive hydrogel particles, from the nano- to microscale, using a single starting material. Particle size is controlled by the self-assembly and unique phase transition behavior of elastin-like polypeptides in bulk and within microfluidic-generated droplets. These particles are then stabilized through ultraviolet irradiation of a photo-crosslinkable unnatural amino acid (UAA) cotranslationally incorporated into the parent polypeptide. The thermoresponsive property of these particles provides an active mechanism for actuation and a dynamic responsive to the environment. This work represents a fundamental advance in the generation of crosslinked biomaterials, especially in the form of soft matter colloids, and is one of the first demonstrations of successful use of UAAs in generating a novel material., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Biological systems can generate microstructured materials that combine organic and inorganic components and possess diverse physical and chemical properties. However, these natural processes in materials fabrication are not readily programmable. Here, we use a synthetic-biology approach to assemble patterned materials. We demonstrate programmable fabrication of three-dimensional (3D) materials by printing engineered self-patterning bacteria on permeable membranes that serve as a structural scaffold. Application of gold nanoparticles to the colonies creates hybrid organic-inorganic dome structures. The dynamics of the dome structures' response to pressure is determined by their geometry (colony size, dome height, and pattern), which is easily modified by varying the properties of the membrane (e.g., pore size and hydrophobicity). We generate resettable pressure sensors that process signals in response to varying pressure intensity and duration.

A comprehensive study is reported on the effect of salt concentration, polyelectrolyte block length, and polymer concentration on the morphology and structural properties of nanoaggregates self-assembled from BAB single-strand DNA (ssDNA) triblock polynucleotides in which A represents polyelectrolyte blocks and B represents hydrophobic neutral blocks. A morphological phase diagram above the gelation point is developed as a function of solvent ionic strength and polyelectrolyte block length utilizing an implicit solvent ionic strength method for dissipative particle dynamics simulations. As the solvent ionic strength increases, the self-assembled DNA network structures shrinks considerably, leading to a morphological transition from a micellar network to worm-like or hamburger-shape aggregates. This study provides insight into the network morphology and its changes by calculating the aggregation number, number of hydrophobic cores, and percentage of bridge chains in the network. The simulation results are corroborated through cryogenic transmission electron microscopy on the example of the self-assembly of ssDNA triblocks., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A series of two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) crystals, based on acene alkylamine cations (i.e., phenylmethylammonium (PMA), 2-phenylethylammonium (PEA), 1-(2-naphthyl)methanammonium (NMA), and 2-(2-naphthyl)ethanammonium (NEA)) and lead(II) halide (i.e., PbX 4 2- , X = Cl, Br, and I) frameworks, and their corresponding thin films were fabricated and examined for structure-property relationship. Several new or redetermined crystal structures are reported, including those for (NEA) 2 PbI 4 , (NEA) 2 PbBr 4 , (NMA) 2 PbBr 4 , (PMA) 2 PbBr 4 , and (PEA) 2 PbI 4 . Non-centrosymmetric structures from among these 2D HOIPs were confirmed by piezoresponse force microscopy-especially noteworthy is the structure of (PMA) 2 PbBr 4 , which was previously reported as centrosymmetric. Examination of the impact of organic cation and inorganic layer choice on the exciton absorption/emission properties, among the set of compounds considered, reveals that perovskite layer distortion (i.e., Pb-I-Pb bond angle between adjacent PbI 6 octahedra) has a more global effect on the exciton properties than octahedral distortion (i.e., variation of I-Pb-I bond angles and discrepancy among Pb-I bond lengths within each PbI 6 octahedron). In addition to the characteristic sharp exciton emission for each perovskite, (PMA) 2 PbCl 4 , (PEA) 2 PbCl 4 , (NMA) 2 PbCl 4 , and (PMA) 2 PbBr 4 exhibit separate, broad "white" emission in the long wavelength range. Piezoelectric compounds identified from these 2D HOIPs may be considered for future piezoresponse-type energy or electronic applications.

We present terminal deoxynucleotidyl transferase-catalyzed enzymatic polymerization (TcEP) for the template-free synthesis of high-molecular-weight, single-stranded DNA (ssDNA) and demonstrate that it proceeds by a living chain-growth polycondensation mechanism. We show that the molecular weight of the reaction products is nearly monodisperse, and can be manipulated by the feed ratio of nucleotide (monomer) to oligonucleotide (initiator), as typically observed for living polymerization reactions. Understanding the synthesis mechanism and the reaction kinetics enables the rational, template-free synthesis of ssDNA that can be used for a range of biomedical and nanotechnology applications., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Self-assembled monolayers (SAMs) have been widely used to engineer the electronic properties of substrate-supported graphene devices. However, little is known about how the surface chemistry of SAMs affects the interfacial mechanical properties of graphene supported on SAMs. Fluctuations and changes in these properties affect the stress transfer between substrate and the supported graphene and thus the performance of graphene-based devices. The changes in interfacial mechanical properties can be characterized by measuring the out-of-plane elastic properties. Combining contact resonance atomic force microcopy experiments with molecular dynamics simulations, we show that the head group chemistry of a SAM, which affects the interfacial interactions, can have a significant effect on the out-of-plane elastic modulus of the graphene-SAM heterostructure. Graphene supported on hydrophobic SAMs leads to heterostructures stiffer than those of graphene supported on hydrophilic SAMs, which is largely due to fewer water molecules present at the graphene-SAM interface. Our results provide an important, and often overlooked, insight into the mechanical properties of substrate-supported graphene electronics.

Development of myopia is associated with large-scale changes in ocular tissue gene expression. Although differential expression of coding genes underlying development of myopia has been a subject of intense investigation, the role of non-coding genes such as microRNAs in the development of myopia is largely unknown. In this study, we explored myopia-associated miRNA expression profiles in the retina and sclera of C57Bl/6J mice with experimentally induced myopia using microarray technology. We found a total of 53 differentially expressed miRNAs in the retina and no differences in miRNA expression in the sclera of C57BL/6J mice after 10 days of visual form deprivation, which induced -6.93 ± 2.44 D (p < 0.000001, n = 12) of myopia. We also identified their putative mRNA targets among mRNAs found to be differentially expressed in myopic retina and potential signaling pathways involved in the development of form-deprivation myopia using miRNA-mRNA interaction network analysis. Analysis of myopia-associated signaling pathways revealed that myopic response to visual form deprivation in the retina is regulated by a small number of highly integrated signaling pathways. Our findings highlighted that changes in microRNA expression are involved in the regulation of refractive eye development and predicted how they may be involved in the development of myopia by regulating retinal gene expression., Competing Interests: The authors have declared that no competing interests exist.

Interfaces and subsurface layers are critical for the performance of devices made of 2D materials and heterostructures. Facile, nondestructive, and quantitative ways to characterize the structure of atomically thin, layered materials are thus essential to ensure control of the resultant properties. Here, we show that contact-resonance atomic force microscopy-which is exquisitely sensitive to stiffness changes that arise from even a single atomic layer of a van der Waals-adhered material-is a powerful experimental tool to address this challenge. A combined density functional theory and continuum modeling approach is introduced that yields sub-surface-sensitive, nanomechanical fingerprints associated with specific, well-defined structure models of individual surface domains. Where such models are known, this information can be correlated with experimentally obtained contact-resonance frequency maps to reveal the (sub)surface structure of different domains on the sample.

Surfaces with end-grafted, nanopatterned polymer brushes that exhibit well-defined feature dimensions and controlled chemical and physical properties provide versatile platforms not only for investigation of nanoscale phenomena at biointerfaces, but also for the development of advanced devices relevant to biotechnology and electronics applications. In this review, we first give a brief introduction of scaling behavior of nanopatterned polymer brushes and then summarize recent progress in fabrication and application of nanopatterned polymer brushes. Specifically, we highlight applications of nanopatterned stimuli-responsive polymer brushes in the areas of biomedicine and biotechnology.

Self-assembly processes of polyelectrolyte block copolymers are ubiquitous in industrial and biological processes; understanding their physical properties can also provide insights into the design of polyelectrolyte materials with novel and tailored properties. Here, we report systematic analysis on how the ionic strength of the solvent and the length of the polyelectrolyte block affect the self-assembly and morphology of the polyelectrolyte block copolymer materials by constructing a salt-dependent morphological phase diagram using an implicit solvent ionic strength (ISIS) method for dissipative particle dynamics (DPD) simulations. This diagram permits the determination of the conditions for the morphological transition into a specific shape, namely vesicles or lamellar aggregates, wormlike/cylindrical micelles, and spherical micelles. The scaling behavior for the size of spherical micelles is predicted, in terms of radius of gyration (R(g,m)) and thickness of corona (Hcorona), as a function of solvent ionic strength (c(s)) and polyelectrolyte length (NA), which are R(g,m) ∼ c(s)(-0.06)N(A)(0.54) and Hcorona ∼ c(s)(-0.11)N(A)(0.75). The simulation results were corroborated through AFM and static light scattering measurements on the example of the self-assembly of monodisperse, single-stranded DNA block-copolynucleotides (polyT50-b-F-dUTP). Overall, we were able to predict the salt-responsive morphology of polyelectrolyte materials in aqueous solution and show that a spherical-cylindrical-lamellar change in morphology can be obtained through an increase in solvent ionic strength or a decrease of polyelectrolyte length.

We demonstrate the reversible micellar aggregation of a DNA-azobenzene conjugate in aqueous conditions, in which the photoisomerization of the initially apolar trans-azobenzene moiety to the polar cis isomer causes disassembly of the aggregates. The molecular basis for this phenomena is a change in the hydrophobic/hydrophilic balance of the conjugate as the more polar cis azobenzene isomer is formed upon exposure to 365 nm irradiation. The conjugates were prepared by copper-free Click chemistry between an azide-modified, 53-base ssDNA and a cyclooctyne derivative of azobenzene. The photocontrolled aggregation of the conjugate was studied by dynamic light scattering and atomic force microscopy. The reversible micellar aggregation for a DNA-azobenzene conjugate has not been previously reported and holds promise for photocontrolled drug delivery applications., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Diarthrodial joints are essential for load bearing and locomotion. Physiologically, articular cartilage sustains millions of cycles of mechanical loading. Chondrocytes, the cells in cartilage, regulate their metabolic activities in response to mechanical loading. Pathological mechanical stress can lead to maladaptive cellular responses and subsequent cartilage degeneration. We sought to deconstruct chondrocyte mechanotransduction by identifying mechanosensitive ion channels functioning at injurious levels of strain. We detected robust expression of the recently identified mechanosensitive channels, PIEZO1 and PIEZO2. Combined directed expression of Piezo1 and -2 sustained potentiated mechanically induced Ca(2+) signals and electrical currents compared with single-Piezo expression. In primary articular chondrocytes, mechanically evoked Ca(2+) transients produced by atomic force microscopy were inhibited by GsMTx4, a PIEZO-blocking peptide, and by Piezo1- or Piezo2-specific siRNA. We complemented the cellular approach with an explant-cartilage injury model. GsMTx4 reduced chondrocyte death after mechanical injury, suggesting a possible therapy for reducing cartilage injury and posttraumatic osteoarthritis by attenuating Piezo-mediated cartilage mechanotransduction of injurious strains.

Contact resonance AFM (CR-AFM) is a scanning probe microscopy technique that utilizes the contact resonances of the AFM cantilever for concurrent imaging of topography and surface stiffness. The technique has not been used in liquid until recently due to analytical and experimental difficulties, associated with viscous damping of cantilever vibrations and fluid loading effects. To address these difficulties, (i) an analytical approach for contact resonances in liquid is developed, and (ii) direct excitation of the contact resonances is demonstrated by actuating the cantilever directly in a magnetic field. By implementing the analytical approach and the direct actuation through magnetic particles, quantitative stiffness imaging on surfaces with a wide range of stiffness can be achieved in liquid with soft cantilevers and low contact forces.

High molecular weight ssDNA amphiphiles are synthesized by enzymatic polymerization. These highly asymmetric diblock DNA copolymers self-assemble into "hairy", star-like micelles, shown in the AFM image and the DPD snapshot., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Vesicle fusion has long provided an easy and reliable method to form supported lipid bilayers (SLBs) from simple, zwitterionic vesicles on siliceous substrates. However, for complex compositions, such as vesicles with high cholesterol content and multiple lipid types, the energy barrier for the vesicle-to-bilayer transition is increased or the required vesicle-vesicle and vesicle-substrate interactions are insufficient for vesicle fusion. Thus, for vesicle compositions that more accurately mimic native membranes, vesicle fusion often fails to form SLBs. In this paper, we review three approaches to overcome these barriers to form complex, biomimetic SLBs via vesicle fusion: (i) optimization of experimental conditions (e.g., temperature, buffer ionic strength, osmotic stress, cation valency, and buffer pH), (ii) α-helical (AH) peptide-induced vesicle fusion, and (iii) bilayer edge-induced vesicle fusion. AH peptide-induced vesicle fusion can form complex SLBs on multiple substrate types without the use of additional equipment. Bilayer edge-induced vesicle fusion uses microfluidics to form SLBs from vesicles with complex composition, including vesicles derived from native cell membranes. Collectively, this review introduces vesicle fusion techniques that can be generalized for many biomimetic vesicle compositions and many substrate types, and thus will aid efforts to reliably create complex SLB platforms on a range of substrates.

Ferroelectric surfaces can have very high surface charge densities that can be harnessed for manipulation of charged colloidal particles and soft matter in aqueous environments. Here, we report on the electrical double layer (EDL) formed by polarized ultrasmooth lead zirconium titanate (US-PZT) thin films in dilute electrolyte solutions. Using colloidal probe force microscopy (CPFM) measurements, we show that the ion distribution within the double layer can be changed by reversing the ferroelectric polarization state of US-PZT. The interaction force in dilute 1:1 electrolyte solution between the negatively charged probe and a positive surface charge (upward polarized) US-PZT thin film is attractive, while the interaction force is repulsive for a negative surface charge (downward polarized) film. We modeled these interactions with a constant-potential EDL model between dissimilar surfaces with the inclusion of a Stern layer. We report the surface potentials at the inner and outer-Helmholtz planes both for polarization states and for a range of ionic strength solutions. Effects of free-charge carriers, limitations of the analytical model, and effects of surface roughness are discussed.