Search

Recent studies have demonstrated the potential of in-situ soil wetness measurements to predict regional shallow landslides. Increasing availability of monitoring data from sensor networks provides valuable information for developing future regional landslide early warning systems (LEWSs), however, most existing monitoring sites are located on flat terrain. The question arises, if the representativeness for regional landslide activity would improve if sensors were installed on a landslide-prone hillslope? To address this, two soil wetness monitoring stations were installed at close proximity on a steep slope and on a flat location in the Napf region (Northern Alpine Foreland of Switzerland), and measurements were conducted over a period of 3 years. As both sites inhibit similar lithological, vegetation and precipitation characteristics, soil hydrological differences can be attributed to the impact of topography and hydrogeology. At the sloped site, conditions were generally wetter and less variable in time, and evidence was found for temporary lateral water transport along the slope. These differences were systematic and could be reduced by considering relative soil moisture changes. The application of a statistical landslide forecast model showed that both sites were equally able to distinguish critical from non-critical conditions for landslide triggering, which demonstrates the value of existing monitoring sites in flat areas for the application in LEWSs. [ABSTRACT FROM AUTHOR]

The current descriptive study seeks to broaden empirical understanding about women charged with intimate partner violence by comparing a sample of women in a domestic violence diversion program (N = 78) to a matched sample of men (N = 78) in the same program on measurements of general risk factors, attitudes toward using violence, and readiness to change. Findings indicate that the women charged with intimate partner violence are a heterogeneous group, endorse risk factors that show an elevated likelihood they will continue to use violence, demonstrate a high level of tolerance for using violence in their relationship, and may be highly amenable to treatment opportunities. Implications for practice and future research are addressed. Keywords: intimate partner violence; female offenders; attitudes; change

White-light interferometry has turned into a standard tool in the field of high-accuracy topography measurements. Nevertheless, surfaces with relatively large local surface tilts or height steps often give rise to systematic measuring errors. The reasons are diffraction and dispersion effects, which cause deviations between height values obtained from the envelope maximum of the white-light interference signal and those obtained from the signal's phase. In certain cases this may result in ghost steps appearing in the measured topography. To identify and eliminate these ghost steps we use a second LED emitting light at a different mean wavelength. This now allows the measurement of curved or structured specular surfaces with high resolution, which up to now was restricted by the mentioned effects. OCIS codes: 180.3170, 180.6900, 120.6650, 120.3940, 150.6910.

Fiber-optical sensors have some crucial advantages compared with rigid optical systems. They allow miniaturization and flexibility of system setups. Nevertheless, optical principles such as low-coherence interferometry can be realized by use of fiber optics. We developed and realized an approach for a fiber-optical sensor, which is based on the analysis of spatially modulated low-coherence interferograms. The system presented consists of three units, a miniaturized sensing probe, a broadband fiber-coupled light source, and an adapted Michelson interferometer, which is used as an optical receiver. Furthermore, the signal processing procedure, which was developed for the interferogram analysis in order to achieve nanometer measurement accuracy, is discussed. A system prototype has been validated thoroughly in different experiments. The results approve the accuracy of the sensor. OCIS codes: 120.0120, 060.2370.

Here polychromatic speckle patterns generated either by a polychromatic light source that emits at discrete frequencies or by a light source showing a continuous narrow-band spectral distribution are studied. The purpose here is the application of polychromatic speckle-pattern analysis to an in-process surface roughness characterization. To compare the coherence properties of the different polychromatic light sources, first a modified definition of the coherence length is introduced. Furthermore, the relevant optical phenomena, namely, the speckle elongation caused by the angular dispersion and the roughness-dependent speckle decorrelation, are summarized. It is shown that light sources with a continuous spectral distribution have essential advantages in comparison with discrete wavelength sources. The theoretical results are confirmed by experimental investigations based on a digital algorithm for the evaluation of CCD images of polychromatic speckle patterns, which are recorded in the Fourier plane of a Fourier-transforming lens. OCIS codes: 030.0030, 030.5770, 030.0140, 120.0120, 120.5820, 120.6650.