Search

The current challenges (e.g., stability, hysteresis, etc.) in organometal halide perovskite solar cell research are closely correlated with surfaces and interfaces. For instance, efficient generation of charges, extraction, and transport with minimum recombination through interlayer interfaces is crucial to attain high-efficiency solar cell devices. Furthermore, intralayer interfaces may be present in the form of grain boundaries within a film composed of the same material, for example, a polycrystalline perovskite layer. The adjacent grains may assume different crystal orientations and/or have different chemical compositions, which impacts charge excitation and dynamics and thereby the overall solar cell performance. In this Perspective, we present case studies to demonstrate (1) how surfaces and interfaces can impact material properties and device performance and (2) how these issues can be investigated by surface science techniques, such as scanning probe microscopy, photoelectron spectroscopy, and so forth. We end this Perspective by outlining the future research directions based on the reported results as well as the new trends in the field.

The family of soluble fullerene derivatives comprises a widely studied group of electron transporting molecules for use in organic electronic and optoelectronic devices. For electronic applications, electron transporting (n-channel) materials are required for implementation into organic complementary logic circuit architectures. To date, few soluble candidate materials have been studied that fulfill the stringent requirements of high carrier mobility and air stability. Here we present a study of three soluble fullerenes with varying electron affinity to assess the impact of electronic structure on device performance and air stability. Through theoretical and experimental analysis of the electronic structure, characterization of thin-film structure, and characterization of transistor device properties we find that the air stability of the present series of fullerenes not only depends on the absolute electron affinity of the semiconductor but also on the disorder within the thin-film. © 2011 American Institute of Physics.

A series of hybrid heterocyle-containing electron-transport materials (ETMs) with different pyridine substitution positions in a single molecule were successfully synthesized by regioselective sequential palladium-catalyzed Suzuki cross-coupling reactions. B3LYP calculations show that the experimental regioselectivity is consistent with the trends in calculated bond dissociation energies of the carbon–halogen (C–X) bonds of the reactants and intermediates. The two carbon species associated with C–N and C–C can be detected by X-ray photoelectron spectroscopy. Extremely low turn-on voltages (Von) of 2.1 V for electroluminescence, which are readily 0.2–0.3 V lower than the minimum value of the emitted photon energy (hv)/e, were experimentally achieved by utilizing the developed ETMs as an electron-transport and hole/exciton-block layer for the classical fac-tris(2-phenylpyridine) iridium (Ir(PPy)3)-based green phosphorescent organic light-emitting devices (OLEDs). In addition, hitherto the lowest operating v...

In order to purify phosphoric acid, the suspension melt crystallization process was studied. The suspension crystallization experiments were carried out with 80, 84 and 88 wt% phosphoric acid melt at the cooling rates of 0.05, 0.1 and 0.2 K/min, respectively. Sweating experiments were executed for various crystals obtained in suspension crystallization step. The purification effects of the sweating parameters including sweating time, initial inclusion amount and initial impurity content were studied. The inclusion fraction increases with the increase in cooling rate. The inclusion fraction of the crystals which were formed with feed concentration of 84 wt% phosphoric acid melt is lowest among the three feed concentrations. Different impurities have different purification performances during sweating. High inclusion amount and low impurity concentration favor the purification of H3PO4·0.5H2O crystals during sweating.

Air-stable dimers of sandwich compounds including rhodocene and (pentamethylcyclopentadienyl)(arene)ruthenium and iron derivatives can be used for n-doping electron-transport materials with electron affinities as small as 2.8 eV. A p-i-n homojunction diode based on copper phthalocyanine and using rhodocene dimer as n-dopant shows a rectification ratio of greater than 10(6) at 4 V.

Atomic force microscopy (AFM) has found its applications in a wide range of research fields. In this review, we show by examples that atomic force microscopy is a powerful technique to investigate structural, mechanical and electrical properties of organic films. We start with an introduction of AFM instrumentation highlighting AFM developments that are of direct relevance to organic films. Next, we review AFM studies on organic films according to their preparation methods: self-assembly, the Langmuir–Blodgett technique, solution preparation, and thermal evaporation. In the discussion on self-assembled monolayers, we focus on aspects such as structural evolution, load-induced molecular tilting, annealing, and incorporation of conjugated groups. For solution prepared organic films, we stress annealing-induced structural evolution as well as the effects of phase separation/segregation. We also briefly summarize the progress of AFM investigation on Langmuir–Blodgett films and thermally evaporated organic films. We conclude the review by providing some thoughts for future exploration. In particular, atomic force microscopy combined with ultra-flat coplanar nano-electrodes provides a promising platform to isolate single or a small number of molecular features (e.g. vacancies, defects, grain boundaries) in organic films as well as to identify the role of these features at the nanometer scale.

A new hexaazatriphenylene (HAT) derivative formed by the fusion of three HAT units has been prepared and its electronic and molecular structures have been fully characterized by optical and vibrational Raman spectroscopy, electrochemistry, solid-state UV and inverse photoemission spectroscopy (UPS and IPES), and by quantum-chemical calculations. A comparative HAT versus tri-HAT study was performed. The fusion of three HAT molecules causes modifications in the optical and electrochemical properties consistent with enhanced π-electron delocalization attained in a bigger planar core. Such combined experimental and theoretical studies are useful to balance chemical design with supramolecular engineering directed to find enhanced characteristics for new organic semiconductor applications.

In this work we demonstrate that the room-temperature deposition of the organic molecule 9,10-phenanthrenequinone (PQ) reduces the surface defect density of the silicon (100) surface by chemically bonding to the surface dangling bonds. Using various spectroscopic measurements we have investigated the electronic structure and band alignment properties of the PQ/Si interface. The band-bending at the PQ-passivated silicon surface is negligible for both n- and p-type substrates, demonstrating a low density of surface defects. Finally we show that PQ forms a semiconducting wide-bandgap type-I heterojunction with silicon.

Temperature-dependent I – V measurements determine that pentacene is effectively p -doped by tetrafluoro-tetracyanoquinodimethane (F 4 -TCNQ). It has been shown by scanning tunneling microscopy (STM) that the donated hole is localized by the ionized dopant counter potential, and that the hole can be visualized [4] . Here, it is argued that the effect of the localized hole on STM images should depend on distance as 1/ ϵr , as per the Coulomb potential. By fitting line profiles of localized hole features to the Coulomb potential, it is shown that approximate values for the relative permittivity and Hubbard U of pentacene can be extracted.

2,2 ',7,7 '-tetrakis(N,N-di-p-methoxyphenylamine)-9,9 '-spirobifluorene (spiro-MeOTAD) has been widely employed as a hole transport layer (HTL) in perovskite-based solar cells. Despite high efficiencies, issues have been reported regarding solution processed spiro-MeOTAD HTL such as pinholes and the strong dependence of electrical properties upon air exposure, which poses challenges for solar cell stability and reproducibility. In this work, we perform a systematic study to unravel the fundamental mechanisms for the generation of pinholes in solution-processed spiro-MeOTAD films. The formation of pinholes is closely related to the presence of small amounts of secondary solvents (e.g. H2O, 2-methyl-2-butene or amylene employed as a stabilizer, absorbed moisture from ambient, etc), which have low miscibility in the primary solvent generally used to dissolve spiro-MeOTAD (e.g. chlorobenzene). The above findings are not only applicable for spiro-MeOTAD (a small organic molecule), but also applicable to polystyrene (a polymer). The influence of secondary solvents in the primary solvents is the main cause for the generation of pinholes on film morphology. Our findings are of direct relevance for the reproducibility and stability in perovskite solar cells and can be extended to many other spin-coated or drop-casted thin films.

Organic field-effect transistors (OFETs) based upon blends of small molecular semiconductor and polymers show promise for high performance organic electronics applications. Here the charge transport characteristics of high mobility p-channel organic transistors based on 2,8-difluoro-5,11-bis(triethylsilyiethynyl) anthradithiophene:poly(triarylamine) blend films are investigated. By simple alteration of the film processing conditions two distinct film microstructures can be obtained: one characterized by small spherulitic grains (SG) and one by large grains (LG). Charge transport measurements reveal thermally activated hole transport in both SG and LG film microstructures with two distinct temperature regimes. For temperatures >115 K, gate voltage dependent activation energies (E A ) in the range of 25―60 meV are derived. At temperatures

Structural aspects of organic molecular films, such as disordering, packing density, molecular bending or tilts, and phase separation, influence electrical properties as well as friction and adhesion. This indicates a correlation between nanomechanical and charge transport properties of molecular films at the molecular scale. In this review, we highlight the recent studies on correlations between charge transport and nanomechanical properties probed with atomic force microscopy. We discuss the key issues that determine charge transport and nanomechanical properties on several organic molecular films, including self-assembled monolayers formed by saturated hydrocarbon molecules conjugated molecules, and hybrid molecules as well as polymer and polymer blend films. We address the role of molecular deformation and bending in friction and conductance measurements. SCANNING 32: 257–264, 2010. © 2010 Wiley Periodicals, Inc.

In this work all-inorganic perovskite CsPbIBr2 are doped with Mn to compensate their shortcomings in band structure for the application of perovskite solar cells (PSCs). The novel Mn-doped all-inorganic perovskites, CsPb1-xMnxI1+2xBr2-2x, are prepared in ambient atmosphere. As the concentration of Mn2+ ions increases, the bandgaps of CsPb1-xMnxI1+2xBr2-2x decrease from 1.89 to 1.75 eV. Additionally, when the concentration of Mn dopants is appropriate, this novel Mn-doped all-inorganic perovskite film shows better crystallinity and morphology than its undoped counterpart. These advantages alleviate the energy loss in hole transfer and facilitate the charge-transfer in perovskites, therefore, PSCs based on these novel CsPb1-xMnxI1+2xBr2-2x perovskite films display better photovoltaic performance than the undoped CsPbIBr2 perovskite films. The reference CsPbIBr2 cell reaches a power conversion efficiency (PCE) of 6.14%, comparable with the previous reports. The CsPb1-xMnxI1+2xBr2-2x cells reach the highest PCE of 7.36% (when x= 0.005), an increase of 19.9% in PCE. Furthermore, the encapsulated CsPb0.995Mn0.005I1.01Br1.99 cells exhibit good stability in ambient atmosphere. The storage stability measurements on the encapsulated PSCs reveal that PCE is dropped by only 8% of the initial value after >300 h in ambient. Such improved efficiency and stability are achieved using low-cost carbon electrodes (without expensive hole transport materials and Au electrodes).

Owing to the intensive research efforts across the world since 2009, perovskite solar cell power conversion efficiencies (PCEs) are now comparable or even better than several other photovoltaic (PV) technologies. In this topical review article, we review recent achievements in the field of organic-inorganic halide perovskite materials and solar cells. We associate these achievements with the fundamental knowledge gained in the perovskite research. The major recent advances in the fundamental perovskite material and solar cell research are highlighted, including the current efforts in visualizing the dynamical processes (in operando) taking place within a perovskite solar cell under operating conditions. We also discuss the existing technological challenges. Based on a survey of recently published works, we point out that to move the perovskite PV technology forward towards the next step of commercialization, what perovskite PV technology need the most in the coming next few years is not only further PCE enhancements, but also up-scaling, stability, and lead-toxicity.

We report on the effect of the deposition of self-assembled monolayers (SAMs) on the source and drain electrodes on the contact resistance and mobility in organic thin film transistors (OTFTs). Ultraviolet photoelectron spectroscopy (UPS) shows a variation of the work function of the electrodes depending on the SAM. OTFTs were fabricated with solution processible Polyera ActivInk™ N1400, TIPS-pentacene and TFB, giving access to both polarities of transistors and to both crystalline and amorphous materials. The transfer line method (TLM) was used to separately estimate the contact resistance and mobility. A clear correlation is found between the work function of the modified electrodes and the corresponding contact resistance. The effect on mobility is more puzzling, and tentatively attributed to morphological effects.

Molybdenum tris-[1,2-bis(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd)3) is investigated as a p-dopant for organic semiconductors. With an electron affinity of 5.6 eV, Mo(tfd)3 is a strong oxidizing agent suitable for the oxidation of several hole transport materials (HTMs). Ultraviolet photoemission spectroscopy confirms p-doping of the standard HTM N,N′-di-[(1-naphthyl)-N,N′-diphenyl]-1,1′-biphenyl-4,4′-diamine (α-NPD). Strong enhancement of hole injection at α-NPD/Au interfaces is achieved via doping-induced formation of a narrow depletion region in the organic semiconductor. Variable-temperature current−voltage measurements on α-NPD: Mo(tfd)3 (0−3.8 mol %) yield an activation energy for polaron transport that decreases with increasing doping concentration, which is consistent with the effect of the doping-induced filling of traps on hopping transport. Good stability of Mo(tfd)3 versus diffusion in the α-NPD host matrix is demonstrated by Rutherford backscattering for temperatures up to 110 °C. Densi...

The adsorption and dissociation of water on a Ru(0001) surface containing a small amount ({le} 3 %) of carbon impurities was studied by scanning tunneling microscopy (STM). Various surface species are formed depending on the temperature. These include molecular H{sub 2}O, H{sub 2}O-C complexes, H, O, OH and CH. Clusters of either pure H{sub 2}O or mixed H{sub 2}O-OH species are also formed. Each of these species produces a characteristic contrast in the STM images and can be identified by experiment and by ab initio total energy calculations coupled with STM image simulations. Manipulation of individual species via excitation of vibrational modes with the tunneling electrons has been used as supporting evidence.

We fabricated perovskite solar cells using a triple-layer of n-type doped, intrinsic and p-type doped 2,2′,7,7′-tetrakis(N,N′-di-p-methoxyphenylamine)-9,9′-spirobifluorene (spiro-OMeTAD) (n-i-p) as hole transport layer (HTL) by vacuum evaporation. The doping concentration for n-type doped spiro-OMeTAD was optimized to adjust the highest occupied molecular orbital of spiro-OMeTAD to match the valence band maximum of perovskite for efficient hole extraction while maintaining a high open circuit voltage. Time-dependent solar cell performance measurements revealed significantly improved air stability for perovskite solar cells with the n-i-p structured spiro-OMeTAD HTL showing sustained efficiencies even after 840 h of air exposure.

Doping properties of 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-MeOTAD) hole transport layer are investigated by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and atomic force microscopy under air exposure. XPS results reveal that 3 h exposure of Li-bis(trifluoromethanesulfonyl)-imide (LiTFSI) doped spiro-MeOTAD to air results in the migration of LiTFSI from the bottom to the top across the spiro-MeOTAD film. AFM images reveal the presence of pinholes with an average diameter of similar to 135 nm and a density of similar to 3.72 holes/mu m(2). In addition, cross-sectional scanning electron microscope images reveal that these pinholes form channels across the doped spiro-MeOTAD film. Optical microscopy and Fourier transform infrared microscopy images confirm the presence of large pinholes with diameters in the range of 1-20 mu m and a density of similar to 289 holes/mm(2) as well. The presence of pinholes may play a major role in the migration processes of the LiTFSI within the spiro-MeOTAD film as well as on the degradation processes of solar cells. This is further confirmed by the rapid decreasing efficiency of perovskite solar cells with solution prepared doped spiro-MeOTAD layers when exposed to air. Correction to article published here April 2022: https://doi.org/10.1021/cm504022q

The electromagnetic band gap properties through a two-dimensional plate constructed with centimetre-sized spherical foam balls surrounded by aluminium rings are studied in the microwave range of 0.7–18 GHz. We observe from both experiments and finite-difference time-domain simulations that multiple band gaps appear and correspond to different resonant modes localized in the rings. The principal stop band, the lowest mode, appears at low frequencies and is robust to any lattice structure, even disorder. However, the remaining auxiliary stop bands, caused by high-order resonances, are usually located at higher frequencies and are more sensitive to the configuration of the structure formed by the ring resonators. We note that the stop bands would be broadened and strongly attenuated if more layers of the same plates were packed together. In addition, even or odd modes can be excited under different orientations of the rings with respect to the polarization of the illuminating radiation.

Magnetic anisotropy of particulate magnetic materials is investigated with respect to the particle shape and compacting geometry. Uniform sized micro-rods and microspheres, coated with nickel, were used. Our results reveal that uniformly aligned rods show the largest magnetic anisotropy, while the field-oriented suspension of coated micro-rods shows somewhat weaker magnetic anisotropy, which is in excellent quantitative agreement with the theoretical calculation. The magnetic anisotropy drops significantly when the micro-rods were replaced by microspheres, even when they were aligned in chain-like formations.

Electrorheological (ER) fluids with microspheres and micro-rods as the component solid phase were examined experimentally to investigate the influences of particle geometry on ER performance. It is observed that for both dried and water-activated ER fluids, the shape of the constituent particles plays a significant role, i.e. for particles with same diameters, the microsphere-based ER fluids show better ER performance than micro-rod-based ER fluids. We found from experiments that the aspect ratio of particles is an important parameter for the ER activities. The tendency is that the ER effect decreases with the increase of the aspect ratio, while this phenomenon becomes much weaker in the case when dried particles were substituted for the ones with moisture.

Mixed cation hybrid perovskites such as CsxFA1−xPbI3 are promising materials for solar cell applications, due to their excellent photoelectronic properties and improved stability. Although power conversion efficiencies (PCEs) as high as 18.16% have been reported, devices are mostly processed by the anti-solvent method, which is difficult for further scaling-up. Here, a method to fabricate CsxFA1−xPbI3 by performing Cs cation exchange on hybrid chemical vapor deposition grown FAPbI3 with the Cs+ ratio adjustable from 0 to 24% is reported. The champion perovskite module based on Cs0.07FA0.93PbI3 with an active area of 12.0 cm2 shows a module PCE of 14.6% and PCE loss/area of 0.17% cm−2, demonstrating the significant advantage of this method toward scaling-up. This in-depth study shows that when the perovskite films prepared by this method contain 6.6% Cs+ in bulk and 15.0% at the surface, that is, Cs0.07FA0.93PbI3, solar cell devices show not only significantly increased PCEs but also substantially improved stability, due to favorable energy level alignment with TiO2 electron transport layer and spiro-MeOTAD hole transport layer, increased grain size, and improved perovskite phase stability.

2,2′,7,7′-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9′-spirobifluorene (spiro-MeOTAD) hole transport material (HTM) is a milestone in the history of perovskite solar cells (PSCs). Proper choice of HTMs is key factor for efficient charge extraction and stability in solar cells. Spiro-MeOTAD is proven to be the most suitable HTM for testing PSCs due to its facile implementation and high performance. Similarly, spiro-MeOTAD is receiving attention in other applications other than in solar cells due to its desirable properties. However, spiro-MeOTAD is under debate regarding the topics of cost-performance, long-term stability, degradation issues (induced by temperature, additives, film quality, and environmental conditions), coating technologies compatibility, reliance on additives, and hysteresis. In this review, the advent of spiro-MeOTAD, and related aforementioned issues about spiro-MeOTAD are discussed. In addition, spiro-MeOTAD properties, alternative and new additives, other applications, and new HTMs that is comparable or outperforms spiro-MeOTAD in PSCs are summarized. In the outlook, the future research directions based on reported results that warrant further investigations are outlined.

Semitransparent perovskite solar cells (st-PSCs) have received remarkable interest in recent years because of their great potential in applications for solar window, tandem solar cells, and flexible photovoltaics. However, all reported st-PSCs require expensive transparent conducting oxides (TCOs) or metal-based thin films made by vacuum deposition, which is not cost effective for large-scale fabrication: the cost of TCOs is estimated to occupy ≈75% of the manufacturing cost of PSCs. To address this critical challenge, this study reports a low-temperature and vacuum-free strategy for the fabrication of highly efficient TCO-free st-PSCs. The TCO-free st-PSC on glass exhibits 13.9% power conversion efficiency (PCE), and the four-terminal tandem cell made with the st-PSC top cell and c-Si bottom cell shows an overall PCE of 19.2%. Due to the low processing temperature, the fabrication of flexible st-PSCs is demonstrated on polyethylene terephthalate and polyimide, which show excellent stability under repeated bending or even crumbing.

This study reports two new, simple and cost-effective hole transporting materials for perovskite solar cells. These novel structures namely N4,N4,N4′″,N4′″-tetrakis(4-methoxyphenyl)-[1,1′:4′,1″:4″,1′″-quaterphenyl]-4,4′″-diamine (TPA-BP-TPA), and (E)-4′,4′″-(ethene-1,2-diyl)bis(N,N-bis(4-methoxyphenyl)-[1″,1′″-biphenyl]-4-amine) (TPA-BPV-TPA) are based on linear π-conjugated linkers and triphenylamine endcappers. These materials possess good solubility and appropriate highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels. Upon testing them as hole transporting materials in perovskite solar cells, in particular, the device with TPA-BPV-TPA exhibits a higher power conversion efficiency (PCE) of 16.42%, which is almost equivalent to the PCE using the conventional expensive 2,2′,7,7′-tetrakis(N,N′-di-pmethoxyphenylamino)-9,9′-spirbiuorene (SPIRO-OMeTAD) compound under similar conditions. Additionally, the device stability measured using this newly developed low-cost compound retains almost 87% of the initial performance after 10 days compared to standard SPIRO-OMeTAD-based devices. From this outstanding outcome it is revealed that simple triphenylamine-based hole-transporting materials with various kinds of π-conjugated linkers can pave the way for developing a new generation of simple hole-transporting materials for low-cost perovskite solar cells.

We fabricated and characterized the material with Mn (10 at.%: atomic percent) doped In3Sb1Te2 (MIST) using co-sputtering and synchrotron radiation, respectively. The MIST thin film showed phase-changes at 97 and 320°C, with sheet resistances of ~10 kΩsq (amorphous), ~0.2 kΩsq (first phase-change) and ~10 Ωsq (second phase-change). MIST did not exhibit any chemical separation or increased structural instability during either phase-change, as determined with high-resolution x-ray photoelectron spectroscopy. Chemical state changes were only depended for In without concomitant changes of Sb and Te. Apparently, doped Mn atoms can be induced with movement of only In atoms.

Using conducting probe atomic force microscopy (CAFM), we show that electrical conductivity in oligothiophene molecular films deposited on SiO(2)/Si wafers is extremely sensitive to degree of crystalline order in the film. By locally distorting the molecular order in the films through the controlled application of pressure with the AFM tip, the lateral charge transport was reduced by factors varying from 2 to 10, even when no changes in the height of the film could be observed.

Graphene is a promising material for applications in aqueous electrolyte environments. To explore the impact of such environments on graphene's electrical properties, we performed Hall bar measurements on electrolyte-gated graphene. Assuming a Drude model, we find that the room temperature carrier mobility in water-gated, SiO2-supported graphene reaches 7000 cm2/Vs, comparable to the best dry SiO2-supported graphene devices. Our results show that the electrical performance of graphene is robust, even in the presence of dissolved ions that introduce an additional mechanism for Coulomb scattering.

We report the presence of CH3NH2 neutral species not only on the surface but also at grain boundaries in the interior of thin polycrystalline films of methylammonium lead iodide perovskite CH3NH3PbI3 (thickness ∼ 50 nm) that were prepared using a standard solution method. Different chemical states for C K-edge were observed at the surfaces and in the interiors of perovskite films. Salient features of σ*(CH3-NH3+: methylammonium cation) and σ*(CH3-NH2: methylamine neutral species) were observed at 290.3 and 292.8 eV in both partial (surface-sensitive) and total (bulk) electron yield modes by near-edge x-ray absorption fine structure measurements. Consistently, two chemical states originated from CH3NH3+ and CH3NH2 in C 1s and N 1s core-level spectra were observed using high-resolution x-ray photoelectron spectroscopy. Using density functional theory calculations, we show that CH3NH2 cannot reside stably in the MAPbI3 perovskite crystal structure. Therefore, we propose that these CH3NH2 neutral species are ...