Search

The need for novel packing materials in both capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) is apparent and the development towards more selective, application-oriented chromatographic phases is under progress world-wide. In this study we have synthesized new polyethyleneimine (PEI) functionalized Mn(2)O(3), SiO(2), SnO(2), and ZrO(2) particles for the fabrication of packed capillary columns for CEC and CLC. The nanocasting approach was successful for the preparation of functionalized metal oxide materials with a controlled porosity and morphology. PEI functionalization was done using ethyleneimine monomers to create particles which are positively charged in aqueous solution below pH 9. This functionalization allowed the possibility to have both hydrophobic (due to its alkyl chain) and ionic interactions (due to positively charged amino groups) with selected compounds. For comparison aminopropyl-functionalized silica was also synthesized and tested. Both slurry pressure and electrokinetic packing procedures used gave similar results, but fast sedimentation of the material caused some problems during the packing. The high stability and wide pH range of PEI-functionalized SiO(2) material, with potential for hydrophobic and electrostatic interactions, proved to be useful for the CEC and CLC separation of some model acidic and neutral compounds., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The use of asymmetrical flow field-flow fractionation (AsFlFFF) in the study of heat-induced aggregation of proteins is demonstrated with bovine serum albumin (BSA) as a model analyte. The hydrodynamic diameter (d(h)), the molar mass of heat-induced aggregates, and the radius of gyration (R(g)) were calculated in order to get more detailed understanding of the conformational changes of BSA upon heating. The hydrodynamic diameter of native BSA at ambient temperature was approximately 7 nm. The particle size was relatively stable up to 60 degrees C; above 63 degrees C, however, BSA underwent aggregation (growth of hydrodynamic diameter). The hydrodynamic diameters of the aggregated particles, heated to 80 degrees C, ranged from 15 to 149 nm depending on the BSA concentration, duration of incubation, and the ionic strength of the solvent. Heating of BSA in the presence of sodium dodecyl sulfate (1.7 or 17 mM) did not lead to aggregation. The heat-induced aggregates were characterized in terms of their molar mass and particle size together with their respective distributions with a hyphenated technique consisting of an asymmetrical field-flow fractionation device and a multi-angle light scattering detector and a UV-detector. The carrier solution comprised 8.5 mM phosphate and 150 mM sodium chloride at pH 7.4. The weight-average molar mass (M(w)) of native BSA at ambient temperature is 6.6x10(4) g mol(-1). Incubation of solutions with BSA concentrations of 1.0 and 2.5 mg mL(-1) at 80 degrees C for 1 h resulted in aggregates with M(w) 1.2x10(6) and 1.9x10(6) g mol(-1), respectively. The average radius of gyration and the average hydrodynamic radius of the heat-induced aggregate samples were calculated and compared to the values obtained from the size distributions measured by AsFlFFF. For comparison static light scattering measurements were carried out and the corresponding average molar mass distributions of solutions with BSA concentrations of 1.0 and 2.5 mg mL(-1) at 80 degrees C for 1 h gave aggregates with M(w) 1.7x10(6) and 3.5x10(6) g mol(-1), respectively., (2010 Elsevier B.V. All rights reserved.)

In the case of local anesthetic intoxication, intravenous administration of lipid-based Intralipid dispersion (Fresenius Kabi) can be used for the entrapment of hydrophobic drugs. Our long-term aim is to develop a sensitive, efficient, and non-harmful lipid-based formulation to specifically trap harmful substances. In this study liposome electrokinetic capillary chromatography (LEKC) was used to study the interactions between local anesthetics and Intralipid or liposome dispersions. Intralipid dispersion and extruded liposomes with different concentrations of 1-palmitoyl-2-oleyl-sn-glycerophosphatidylcholine (POPC), phosphatidylglycerol, cardiolipin, cholesterol, oleic acid, and linoleic acid were used as a pseudostationary phase in LEKC and their interactions with lidocaine, prilocaine, and bupivacaine were studied. POPC liposomes containing 1mol% of palmitoyl-2-[12-[(7-nitro-2-1,3-benzoxadiazol-4-yl)amino]dodecanoyl]-sn-glycero-3-phosphocholine as a fluorescent marker were used for the first time in LEKC connected with laser-induced fluorescent detection in order to calculate the retention factor for anesthetics.

A phospholipid-bovine serum albumin (BSA) coating was developed for chiral capillary electrochromatographic separation of d- and l-tryptophan. Temperature, liposome composition, and liposome-BSA mixing and extrusion were found to have critical effects on the chiral separation of d- and l-tryptophan in terms of resolution, separation efficiency, and migration times. A solution of 0.5mM phosphatidylcholine (PC)-1 mg/ml BSA performed better than a solution of 0.5mM PC/phosphatidylserine (PS) (80:20, mol%)-1 mg/ml BSA as capillary coating; baseline separation of the enantiomers with satisfactory resolution was then achieved. Temperature played a crucial role in the chiral separation, as demonstrated for phospholipid-coated capillaries immobilized with BSA and lysozyme. The d- and l-tryptophans showed a marked difference in separation efficiency on the PC-BSA-coated capillary; the theoretical plate number of l-tryptophan was above 500,000 m(-1), whereas that of d-tryptophan was only about 22,000 m(-1). Immobilized BSA (pI 4.7) showed better chiral separation selectivity for the enantiomers than did immobilized lysozyme (pI 10.5), alpha-chymotrypsin (pI 8.1-8.3), or avidin (pI 10.0-10.5); also resolution was better and analysis time was faster. Hydrophobic interactions played an important role in the BSA-immobilized phospholipid-coated capillaries. The importance of protein net charge and molar mass for its immobilization in phospholipid-coated capillaries is discussed.

Anionic phospholipids phosphatidic acid (PA), phosphatidylglycerol (PG), phosphatidylinositol (PI), and phosphatidylserine (PS) were examined for their effect on 1-palmitoyl-2-oleyl-sn-glycero-3-phosphatidylcholine (POPC)-containing liposomes used as coating material in capillary electrochromatography. Liposome solvent was N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer at pH 7.4 with and without 3 mM of CaCl2. The background electrolyte solution was HEPES buffer at pH 7.4. The net charge, size, and short-term stability of the liposomes were measured with a Zetasizer. Results showed that calcium interacts with all liposomes but most strongly with POPC/PA. The relative migration times, retention factors, and resolution of the model analytes (one cationic, three uncharged ions, and one anionic) were studied. All liposomes successfully coated the silica capillary. Without calcium the strongest interaction and best separation of the analytes were with the POPC/PI and POPC/PS coatings, while interactions with the POPC/PA coating were weak. Calcium enhanced the interactions of the model analytes with all coatings, and the interactions were then strongest with the POPC/PA coating. In the presence of calcium there appears to be a slight reorganization of the coating with increasing number of runs. Our results indicate strong interactions between calcium and the phosphate groups in phospholipids and demonstrate the significant role of the phospholipid polar head group in phospholipid coatings on silica surfaces.

A novel, comprehensive two-dimensional asymmetric field-flow fractionation-liquid chromatographic system is described (AsFlFFF-RPLC). The interface is based on a switching valve, and the whole sample is analyzed in both dimensions. The system proved to be repeatable and quantitative in the characterization of egg white proteins. Four peaks at 4, 5.5-6.0, 7.5-8.0, and 10.0-11.0 nm, and corresponding to lysozyme, ovalbumin, transferrin, and a dimer of transferrin, were obtained in the AsFlFFF first-dimension system. Lysozyme also produced an additional peak, which overlapped with ovalbumin. Twelve compounds were separated in the LC second-dimension system. Identifications were made with the help of standards (ovalbumin, ovotransferrin, lysozyme) and by comparison of the peak areas, particle sizes, and retention data with values given in the literature. The effect of heat on egg white denaturation was studied, and the unfolding of peptide bonds of the protein was found to be pronounced when the sample was heated in phosphate solution.

The adsorption of anionic phospholipids on silica was investigated by the dissipative quartz crystal microbalance (QCM) technique. Liposomes composed of 1 mM 80:20 mol % of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphatidylcholine (POPC)/phosphatidic acid, POPC/phosphatidylglycerol, or POPC/phosphatidylserine in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) buffer at pH 7.4 (with or without 3 mM of CaCl2) were examined. We have previously demonstrated that similar phospholipid coatings can be used in capillary electrochromatography as a stationary phase for the separation of analytes. In this work, we focus on the formation of the coatings and on the type of lipid structure formed on silica. The QCM investigation comprised qualitative results based on changes in frequency and resistance, and quantitative modeling of the obtained results. The latter was performed using the dissipative QCM, which measures the quartz crystal impedance, combined with equivalent circuit analysis. A previously developed coating and cleaning procedure for phospholipid-coated fused silica capillaries was adopted in this study, and the same silica-coated crystal was used throughout the QCM study. We will demonstrate in this work that the type of lipid structure formed on silica, that is, a rather rigid supported lipid bilayer or a viscoelastic supported vesicle layer (SVL), is highly dependent on the lipid and solvent composition. We also show for the first time that the modeling of the dissipative QCM data can be used to extract a more quantitative picture of an adsorbed SVL, because, so far, published studies have merely used the QCM data in a qualitative sense.

Lipid membranes are well recognized ligands that bind peripheral and integral proteins in a specific manner and regulate their function. Cytochrome c (cyt c) is one of the partner peripheral protein that binds to the lipid membranes via electrostatic and hydrophobic interactions. In this study, asymmetrical flow field-flow fractionation (AsFlFFF) was used to compare the interactions of cyt c with the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol (DMPG), oleic acid (OA), and sodium dodecyl sulfate (SDS). The influence of pH and the cyt c-lipid molar mass ratios were evaluated by monitoring the diffusion coefficients and particle diameter distributions obtained for the free and lipid-bound protein. The hydrodynamic particle diameter of cyt c (pI 10) was 4.1 nm at pH 11.4 and around 4.2 nm at pH 7.0 and 8.0. Standard molar mass marker proteins were used for calibration to obtain the molar masses of free cyt c and its complexes with lipids. AsFlFFF revealed the binding of cyt c to DMPG and to OA to be mainly electrostatic. In the absence of electrostatic interactions, minor complex formation occurred, possibly due to the extended lipid anchorage involving the hydrophobic cavity of cyt c and the hydrocarbon chains of DMPG or SDS. The possibility of the formation of the molten globule state of cyt c, induced by the interaction between cyt c and lipids, is discussed.

Large unilamellar vesicles of egg-phosphatidylcholine (eggPC), a naturally occurring phospholipid, were used in capillary electrophoresis (CE) for semi-permanent coating of fused silica capillaries. The stability of the phospholipid coating was tested at different cetyltrimethylammonium bromide (CTAB) concentrations with and without CaCl(2) present in the coating solution. The effect of physical factors influencing the coating stability (e.g. duration of the coating time, storage temperature of the coating solution) were also studied. Standing overnight in background electrolyte (BGE) solution did not alter the eggPC phospholipid coating noticeably. The performance of the coating was tested with a mixture of basic proteins (lysozyme, ribonuclease A and alpha-chymotrypsinogen A). Highest efficiencies (over 200,000 plates m(-1)) were achieved when the capillary was filled for 15 h with a liposome solution containing both CTAB and CaCl(2).

The effect of calcium on phospholipid coatings in fused silica capillaries used in capillary electrophoresis was studied. The anionic liposomes used for the coating consisted of 3 mM 1-palmitoyl-2-oleyl- sn-glycero-3-phosphatidylcholine and phosphatidylserine in the ratio 80/20 mol%. Coating was performed as part of the preconditioning, and the capillaries could be used for several runs without the need for liposomes in the background electrolyte solution or for liposome rinses between runs. Phospholipids could easily be flushed away by rinsing with a chloroform-methanol (2:1 v/v) mixture, which made it possible to recoat and reuse the capillaries. A calcium:phospholipid ratio of approximately 3 gave the most stable coating. The stability of the coating and success of the coating procedure were studied by measuring the electroosmotic flow and by separating uncharged steroids, which were used as model compounds. Many parameters that affect the coating, such as preconditioning (with different acids and bases), buffer, temperature during coating, and the physical structures of liposomes, were studied, with and without calcium in the liposome solution. The separation of steroids was improved and was less dependent on coating conditions when calcium was present during the coating. Capillaries optimally coated with anionic phospholipids were applied in the separation of phenols.