Search

Reports on an aldol-type reaction of phenolic enolates derived from methyl 2,4-dihydroxybenzoate and its analogs with not only water-soluble aldehydes but also hydrophobic aldehydes in methanol. Alkaline earth metal reagents used in the reaction; Successful application of the sequence to the synthesis of dl-cannabichromeavarinic acid.

Surface modified chitin nanofibers (SMCNFs) were easily prepared by reacting chitin powder with dodecenyl succinic anhydride (DDSA) and mechanical treatment. The resulted SMCNFs were homogenously dispersed in a series of organic solvents since more hydrophobic group was introduced on the surface of chitin nanofibers. Poly (methyl methacrylate) (PMMA)/SMCNFs nanocomposite films were prepared by simple solution casting method. The homogenous dispersion of the SMCNFs in the PMMA matrix was facilitated, due to the presence of hydrogen bonding and hydrophobic interactions between the nanofillers and the PMMA matrix. Thus, PMMA/SMCNFs nanocomposite films shown high optical transparency, which were nearly the same as the transmittance of the neat PMMA film. Tensile testing results revealed that, inclusion of SMCNFs in the PMMA matrix yielding a more fracture strain and tougher films than the neat PMMA film. Thermal analysis of the neat PMMA and nanocomposite films demonstrated that, the thermal stability of PMMA was significantly enhanced upon inclusion of SMCNFs. The remarkable reinforcement effect of SMCNFs in enhancing the mechanical and thermal properties of PMMA without altering its transparency was resulted from their crystallinity, high aspect ratio, and homogenous dispersibility in the DMF solvent and PMMA polymer matrix. Image 1 • SMCNFs were prepared using simple method and green process. • Highly transparent PMMA nanocomposite films with high elongation at break were obtained by solution casting method. • Both the FTIR and XRD analyses indicated the existence of interactions between PMMA and SMCNFs. • Thermal and mechanical properties of nanocomposite films were effectively improved. [ABSTRACT FROM AUTHOR]

Abstract The alternative oxidase (AOX) is a monotopic diiron carboxylate protein which catalyzes the four-electron reduction of dioxygen to water by ubiquinol. Although we have recently determined the crystal structure of Trypanosoma brucei AOX (TAO) in the presence and absence of ascofuranone (AF) derivatives (which are potent mixed type inhibitors) the mechanism by which ubiquinol and dioxygen binds to TAO remain inconclusive. In this article, ferulenol was identified as the first competitive inhibitor of AOX which has been used to probe the binding of ubiquinol. Surface plasmon resonance reveals that AF is a quasi -irreversible inhibitor of TAO whilst ferulenol binding is completely reversible. The structure of the TAO-ferulenol complex, determined at 2.7 Å, provided insights into ubiquinol binding and has also identified a potential dioxygen molecule bound in a side-on conformation to the diiron center for the first time. [ABSTRACT FROM AUTHOR]

Abstract In this study, the effects of chitosan and surface-deacetylated chitin nanofibrils (SDACNFs) on hair growth were evaluated. In human follicle dermal papilla cells in vitro , chitosan and SDACNFs were shown to increase cell growth on day 3 after the initiation of treatment, together with an increase in the production of fibroblast growth factor-7 (FGF-7) by these cells on day 3. Furthermore, in an in vivo study in mice, chitosan and SDACNF application promoted hair growth. The number of anagen follicles significantly increased compared with that in the control group, whereas the number of telogen follicles significantly decreased in the chitosan and SDACNF groups. In the chitosan and SDACNFs groups, moreover, the expression levels of FGF-7 and Sonic hedgehog were significantly upregulated in hair follicles. Overall, our results demonstrated that chitosan and SDACNFs promoted hair growth and therefore may have applications as novel therapeutic agents for the treatment of hair loss in patients. [ABSTRACT FROM AUTHOR]

Abstract We introduce a simple method for producing guanidinylation of chitosan (CS) with 1‑amidinopyrazole hydrochloride (AP). Production of GCS is proved via NMR, IR, and elemental analyses. In a reaction using 4.5 eq of AP for 7 days at room temperature, we obtained GCS with 42.3% of degree of guanidinylation (DG). The DG value can be controlled by the reaction time and AP amount. Furthermore, remarkable enhancement of the interaction between GCS and bovine serum albumin by guanidinylation was observed. This simple guanidinylation method for CS could provide novel additives for protein/peptide delivery systems. Highlights • Guanidinylation of chitosan with 1‑amidinopyrazole hydrochloride was investigated. • High degree of guanidinylation (42.3%) was achieved with a simple method. • Effect of guanidino groups on BSA-binding was investigated with fluorescence spectra. • Guanidino groups enhanced the interaction with BSA in neutral pH remarkably. [ABSTRACT FROM AUTHOR]

Plasmodium falciparum is an apicomplexan parasite that causes the most severe malaria in humans. Due to a lack of effective vaccines and emerging of drug resistance parasites, development of drugs with novel mechanisms of action and few side effects are imperative. To this end, ideal drug targets are those essential to parasite viability as well as absent in their mammalian hosts. The mitochondrial electron transport chain (ETC) of P. falciparum is one source of such potential targets because enzymes, such as L -malate:quinone oxidoreductase (PfMQO), in this pathway are absent humans. PfMQO catalyzes the oxidation of L -malate to oxaloacetate and the simultaneous reduction of ubiquinone to ubiquinol. It is a membrane protein, involved in three pathways (ETC, the tricarboxylic acid cycle and the fumarate cycle) and has been shown to be essential for parasite survival, at least, in the intra-erythrocytic asexual stage. These findings indicate that PfMQO would be a valuable drug target for development of antimalarial with novel mechanism of action. Up to this point in time, difficulty in producing active recombinant mitochondrial MQO has hampered biochemical characterization and targeted drug discovery with MQO. Here we report for the first time recombinant PfMQO overexpressed in bacterial membrane and the first biochemical study. Furthermore, about 113 compounds, consisting of ubiquinone binding site inhibitors and antiparasitic agents, were screened resulting in the discovery of ferulenol as a potent PfMQO inhibitor. Finally, ferulenol was shown to inhibit parasite growth and showed strong synergism in combination with atovaquone, a well-described anti-malarial and bc 1 complex inhibitor. [ABSTRACT FROM AUTHOR]

The development of chitin-based materials with favorable mechanical properties and biocompatibility is an important research goal owing to the wide-ranging practical applications. In this study, a composite film was prepared using chitin nanofibers and gelatin. The CNF/gelatin composite film was highly viscous and had a fine nanofiber structure. The transmittances indicated high transparency, regardless of nanofiber content. The water content of the CNF/gelatin composite film increased linearly as the gelatin content increased. Although the CNF/gelatin composite film did not induce severe inflammation, it strongly induced fibroblast proliferation, indicating high biocompatibility. Based on these results, the films are suitable for biological applications, e.g., tissue engineering, medicines, and cosmetics. [ABSTRACT FROM AUTHOR]

We previously developed bio-based wrinkled surfaces induced by wood-mimetic skins upon drying in which microscopic wrinkles were fabricated on a chitosan (CS) film by immersing it in a phenolic acid solution, followed by horseradish peroxidase (HRP)-catalyzed surface reaction and drying. However, the detailed structure of the resulting wood-mimetic skins, including crosslinking mode and thickness, has not been clarified due to the difficulty of the analysis. Here, we prepare wrinkled films using ferulic acid (FE), vanillic acid (VA), and homovanillic acid (HO) and characterize their structures to clarify the unknown characteristics of wood-mimetic skin. Chemical and structural analyses of wood-mimetic skins prepared using VA and HO indicate that the crosslinking structure in the skin is composed of ionic bonds between CS and an oligophenolic residue generated by the HRP-catalyzed reaction on the CS surface. Moreover, the quantity of these ionic bonds is related to the skin hardness and wrinkle size. Finally, SEM and TOF-SIMS analyses indicate that the skin thickness is on the submicron order (<200 nm). [ABSTRACT FROM AUTHOR]

Esterification with maleic anhydride significantly improved the mechanical disintegration of chitin into uniform 10-nm nanofibers. Nanofibers with 0.25 ° of esterification were homogeneously dispersed in basic water due to the carboxylate salt on the surface. Esterification proceeded on the surface and did not affect the relative crystallinity. A cast film of the esterified chitin nanofibers was highly transparent, since the film was free from light scattering. [ABSTRACT FROM AUTHOR]

A protein/CaCO3/chitin nanofiber complex was prepared from crab shells by a simple mechanical treatment with a high-pressure water-jet (HPWJ) system. The preparation process did not involve chemical treatments, such as removal of protein and calcium carbonate with sodium hydroxide and hydrochloric acid, respectively. Thus, it was economically and environmentally friendly. The nanofibers obtained had uniform width and dispersed homogeneously in water. Nanofibers were characterized in morphology, transparency, and viscosity. Results indicated that the shell was mostly disintegrated into nanofibers at above five cycles of the HPWJ system. The chemical structure of the nanofiber was maintained even after extensive mechanical treatments. Subsequently, the nanofiber complex was found to improve the growth of tomatoes in a hydroponics system, suggesting the mechanical treatments efficiently released minerals into the system. The homogeneous dispersion of the nanofiber complex enabled easier application as a fertilizer compared to the crab shell flakes. [ABSTRACT FROM AUTHOR]

We evaluated the effect of chitin nanofibril (CNF) application via skin swabs on an experimental atopic dermatitis (AD) model. AD scores were lower, and hypertrophy and hyperkeratosis of the epidermis were suppressed after CNF treatment. Furthermore, inflammatory cell infiltration in both the epidermis and dermis was inhibited. CNFs also attenuated histological scores. The suppressive effects of CNFs were equal to those of corticosteroid application; however, chitin did not show these effects. CNF application might have anti-infllammatory effects via suppression of the activation of nuclear factor-kappa B, cyclooxygenase-2, and inducible nitric oxide synthase. In an early-stage model of experimental AD, CNFs suppressed AD progression to the same extent as corticosteroids. They also suppressed skin inflammation and IgE serum levels. Our findings indicate that CNF application could aid in the prevention or treatment of AD skin lesions. [ABSTRACT FROM AUTHOR]

We previously reported a chitin nanofiber hydrogel from squid pen β-chitin by a simple NaOH treatment. In the present study, a calcium phosphate/chitin nanofiber hydrogel was prepared for bone tissue engineering. Calcium phosphate was mineralized on the hydrogel by incubation in a solution of diammonium hydrogen phosphate solution followed by calcium nitrate tetrahydrate. X-ray diffractometry and Fourier transform infrared spectroscopy showed the formation of calcium phosphate crystals. The morphology of the calcium phosphate crystals changed depending on the calcification time. After mineralization, the mechanical properties of the hydrogel improved due to the reinforcement effect of calcium phosphate crystal. In an animal experiment, calcium phosphate/chitin nanofiber hydrogel accelerated mineralization in subcutaneous tissues. Morphological osteoblasts were observed. [ABSTRACT FROM AUTHOR]

We have designed a novel 1,8-naphthalimide derivative with an open space for an anion. Computational calculation has predicted that the space could trap various anion species and photo-induced charge transfer depending on the anion's electrophilic properties. Indeed, the fluorescence behaviour of the 1,8-naphthalimide derivative complexes with each anion is consistent with the computational prediction. [ABSTRACT FROM AUTHOR]