Search

Bacterial diseases cause tremendous economic losses due to high morbidity and mortality in livestock animals. F17A protein, the major subunit of F17 fimbriae, is one of the most prevalent and crucial virulence factors among the pathogenic Escherichia coli ( E. coli ) isolated from diarrheic and septicemic animals of various species. Purification and detection of this protein is regarded as an interesting field of investigation due to its important role as a therapeutic target, such as vaccines, and as a diagnostic tool. In this context, polyclonal rabbit antibodies recognizing F17A protein (anti-F17A antibody) were developed and used for its detection. In fact, sandwich biosensor using anti-F17A/gold nanoparticles conjugates as capture probe and anti-F17A antibody labelled with horseradish peroxidase as signal amplification probe was developed for electrochemical and fluorescent detection of purified F17A protein and live F17-positive E. coli bacteria. Good specificity and sensitivity for detection of F17-positive E. coli strains were obtained. The dynamic range for the biosensor varies from 1 × 10 2 to 1 × 10 9 CFU·mL -1 (R 2 = 0.998) and the detection limit (LOD) and the IC 50 value were estimated to be 37 CFU·mL -1 and 75 CFU·mL -1 , respectively.

IL-6 is an important interleukin associated with inflammation and several diseases such as cancer. Evaluation of its levels in human blood sera is a critical step for an accurate diagnosis of the diseases. Our goal is to design peptides that can selectively bind in different poses with good affinities to IL-6. For this purpose, we started from the crystal structures of different IL-6/protein complexes available in the Protein Data Bank (PDB) to select short peptides in the interaction zones, in which we intentionally introduced point mutations to increase their stability and affinity. To examine their usefulness as capture and reporting probes for the IL-6 biosensing, the five peptides and their interaction with IL-6 were studied in saline aqueous solution. Molecular docking, MD, and MM-PBSA were used to investigate the affinity and stability of these complexes. The conformational changes, the distance between the mass centers, the gyration radii, and the numbers of hydrogen bonds were analyzed to select the most suitable candidates. Three peptides, namely CTE17, CAY15 and CSE25, have the highest affinities presenting significant numbers of residues that have contact frequencies greater than 50% of simulation run time and are the most promising candidates. CTE17 and CSE25 showed they can form a stable sandwich with the target protein. For sake of comparison, we examined the previously known peptides (FND20, INL19 and CEK17) having affinity to IL-6 and the affinity of the lead i.e. CSE25 to two other interleukin family members (IL-4 and to IL-10)., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

We report the design of an electrochemical aptasensor for ampicillin detection, which is an antibiotic widely used in agriculture and considered to be a water contaminant. We studied the transducing potential of nanostructure composed of MoS2 nanosheets and conductive polypyrrole nanoparticles (PPyNPs) cast on a screen-printed electrode. Fine chemistry is developed to build the biosensors entirely based on robust covalent immobilizations of naphthoquinone as a redox marker and the aptamer. The structural and morphological properties of the nanocomposite were studied by SEM, AFM, and FT-IR. High-resolution XPS measurements demonstrated the formation of a binding between the two nanomaterials and energy transfer affording the formation of heterostructure. Cyclic voltammetry and electrochemical impedance spectroscopy were used to analyze their electrocatalytic properties. We demonstrated that the nanocomposite formed with PPyNPs and MoS2 nanosheets has electro-catalytic properties and conductivity leading to a synergetic effect on the electrochemical redox process of the redox marker. Thus, a highly sensitive redox process was obtained that could follow the recognition process between the apatamer and the target. An amperometric variation of the naphthoquinone response was obtained regarding the ampicillin concentration with a limit of detection (LOD) of 10 pg/L (0.28 pM). A high selectivity towards other contaminants was demonstrated with this biosensor and the analysis of real river water samples without any treatment showed good recovery results thanks to the antifouling properties. This biosensor can be considered a promising device for the detection of antibiotics in the environment as a point-of-use system.

Rapid and sensitive detection of SARS-CoV-2 virus genetic material is of paramount importance to mitigate the COVID-19 pandemic outbreak and lower the death toll. Herein, we report the design of a magnetofluorescent bioplatform for the direct and specific detection of the viral RNA of SARS-CoV-2 in the total RNA extracted from nasopharyngeal swabs of COVID-19-positive patients. A higher fluorescence response was achieved using two capture probes tethered to magnetic beads using a biotin/streptavidin linkage, targeting two specific sites in the ORF1a and S genes. Two horseradish peroxidase (HRP)-conjugated reporter sequences, complementary to the loci of the S and N genes, were used to reveal the presence of the viral RNA through the oxidation of o -phenylenediamine to fluorescent 2,3-diaminophenazine. Under optimal conditions, the bioplatform showed high selectivity and sensitivity and was able to detect as low as 0.01 ng of viral RNA (1 × 10 3 copies/μL) with a linear dynamic range varying from 0.01 to 3.0 ng (1 × 10 3 to 9 × 10 7 copies/μL). The bioplatform was also able to discriminate the SARS-CoV-2 RNA from those of other related viruses such as hepatitis C, West Nile, measles, and non-polio viruses. Furthermore, the developed biosensor was validated in 46 clinical samples (36 COVID-19-positive patients and 10 COVID-19-negative subjects, as assessed with the gold standard RT-qPCR method). Both sensitivity and specificity of the developed method reached 100%. Finally, making such a simple and specific method available in the field, at a primary point of care, can better help the detection of SARS-CoV-2 infection in low-resource settings.

We describe the design of a simple and highly sensitive electrochemical bioanalytical method enabling the direct detection of a conserved RNA region within the capsid protein gene of a fish nodavirus, making use of nanostructured disposable electrodes. To achieve this goal, we select a conserved region within the nodavirus RNA2 segment to design a DNA probe that is tethered to the surface of nanostructured disposable screen-printed electrodes. In a proof-of-principle test, a synthetic RNA sequence is detected based on competitive hybridization between two oligonucleotides (biotinylated reporter DNA and target RNA) complimentary to a thiolated DNA capture probe. The method is further validated using extracted RNA samples obtained from healthy carrier Sparus aurata and clinically infected Dicentrarchus labrax fish specimens. In parallel, the sensitivity of the newly described biosensor is compared with a new real-time RT-PCR protocol. The current differences measured in the negative control and in presence of each concentration of target RNA are used to determine the dynamic range of the assay. We obtain a linear response (R 2 = 0.995) over a range of RNA concentrations from 0.1 to 25 pM with a detection limit of 20 fM. The results are in good agreement with the results found by the RT-qPCR. This method provides a promising approach toward a more effective diagnosis and risk assessment of viral diseases in aquaculture.

Matrix metalloproteinase 9 (MMP-9) is a zinc-dependent endopeptidase that promotes angiogenesis, tumor growth, metastasis and cell invasion through the degradation of extracellular matrix. This work reports a magnetic microbeads (MBs)-based sandwich immunoassay for the amperometric determination of MMP-9 at screen-printed carbon electrodes (SPCEs). The suitable capture antibody (cAb) is immobilized onto carboxylic MBs to selectively capture the antigen which is sandwiched with a biotinylated detector antibody (biotin-dAb) further conjugated with a commercial streptavidin-horseradish peroxidase (Strep-HRP) polymer. This immunoplatform provides great analytical characteristics in terms of selectivity and sensitivity, achieving a LOD value of 2.4 pg mL -1 for standards in buffered solutions. Although this value is similar to those reported for some other approaches described so far, the method described here is simpler involving a single 30 min incubation step which makes it ideal for automation or implementation in POC devices. Moreover, the method was assayed for the accurate determination of endogenous MMP-9 in both cancer cell lysates and serum samples of patients diagnosed with different subtypes of breast cancer (BC) after a simple dilution. The results obtained show that the disposable and affordable immunoplatform developed is able not only to discriminate BC patients from healthy individuals but also to do it for the worst outcome triple negative (TNBC) subtype., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Food quality is of paramount importance for public health safety. For instance, fish freshness can be assessed by sensing the volatile short chain alkylamines produced by spoiled fish. Functionalized graphene is a good candidate for the design of gas sensors for such compounds and therefore of interest as the basic material in food quality sensor devices. To shed theoretical insight in this direction, in the present work we investigate via first-principles density functional theory (DFT) simulations: (i) graphene functionalization via aziridine appendages and (ii) the adsorption of short chain alkylamines (methylamine MA, dimethylamine DMA, and trimethylamine TMA) on the chemically functionalized graphene sheets. Optimal geometries, adsorption energies, and projected density of states (PDOS) are computed using a DFT method. We show that nitrene reactive intermediates, formed by thermal or photo splitting of arylazides - p -carboxyphenyl azide (1a), p -carboxyperfluorophenyl azide (1b), and p -nitrophenyl azide (1c) - react with graphene to yield functionalized derivatives, with reaction energies >-1.0 eV and barriers of the order of 2.0 eV, and open a ∼0.3 to 0.5 eV band gap which is in principle apt for applications in sensing and electronic devices. The interaction between the amines and functionalized graphene, as demonstrated from the calculations of charge density differences showing regions of charge gain and others of charge depletion between the involved groups, occurs through hydrogen bonding with interaction energies ranging from -0.04 eV to -0.76 eV, and induce charge differences in the system, which in the case of p -carboxyperfluorophenyl azide (1b) are sizeable enough to be experimentally observable in sensing., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In this work, we describe the use of a new truncated aptamer for the determination of ofloxacin (OFL), being a principal quinolone commonly used in both human and animal healthcare. Since the affinity of a 72-mer ssDNA sequence has been previously described without further investigations, this paper demonstrates the first computational prediction of the binding motif between this aptamer and OFL through in silico molecular docking studies. Besides, we suggest the application of the characterized recognition mechanism in a simple FRET (Förster Resonance Energy Transfer) pattern for the rapid aptasensing of the quinolone of interest. Accordingly, our approach harnesses the fluorescence quenching of the fluorescein-tagged aptamer (FAM-APT) induced by its partial hybridization to a tetramethyl rhodamine-labelled complementary ssDNA (TAMRA-cDNA). In such a structure, dye labels brought into close proximity act as a FRET pair. Upon ofloxacin addition, an affinity competition occurs to form a more stable FAM-APT/OFL complex, thus unquenching the FAM-APT signal. Interestingly, the recovered fluorescence intensity was found to correlate well with the antibiotic's concentrations in the range of 0.2-200 μM in HEPES buffer, with a linear response that ranged between 0.2 and 20 μM. The rapid apta-assay achieved limits of detection and quantification of 0.12 and 0.40 μM, respectively. The truncated aptamer has also shown an improved specificity toward OFL than other quinolones, compared to the original full-length aptamer described in previous works. Finally, the practical application of the developed apta-assay was successfully confirmed to detect OFL quinolone in spiked milk samples, with satisfactory recoveries ranging between 97.4% and 111.4%.

An impedance-based DNA multiplexed biosensor was designed to simultaneously detect Escherichia coli (yaiO gene) and its virulent f17 variant. The thiolated DNA dual probe was self-assembled onto the surface of the gold nanoparticle-modified screen-printed carbon electrode (AuNPs/SPCE) to recognize selected sequences from yaiO and f17 genes. The optimal conditions to prepare the bioelectrode were determined based on the monitoring of the impedimetric response fitted to an equivalent electrical circuit model. The charge transfer resistance of the bioelectrode increased by recognizing the target DNA sequences. The limit of detection was 0.8 fM and 1.0 fM for yaiO and f17 target DNA, respectively, and the linearity ranged from 1 × 10 -15 to 1 × 10 -7  M with a linear regression coefficient R ≥ 0.995. The nanodevice provided a novel strategy for simultaneous detection of E. coli and its virulence f17 gene with excellent discrimination with a single-base mismatch, two-base mismatch, and non-complementary sequences. Moreover, genomic DNA extracted from E. coli bacteria isolated from diarrheic camel calves and control animals in Tunisia was successfully detected using the as-prepared biosensor with minimal treatment of the extracted DNA samples.Graphical abstract.

The preparation of an integrated biosensor for the easy, fast, and sensitive determination of miRNAs is described based on a direct hybridization format and a label-free voltammetric detection. The biosensor involves a disposable carbon electrode substrate doubly nanostructured with reduced graphene oxide (rGO) and AuNPs modified with pyrene carboxylic acid (PCA) and 6-ferrocenylhexanethiol (Fc-SH), respectively. A synthetic amino terminated DNA capture probe was covalently immobilized on the CO 2 H moieties of PCA/rGO, while Fc-SH was used as a signaling molecule. Differential pulse voltammetry was employed to record the decrease in the oxidation peak current of Fc after the hybridization due to the hindering of the electron transfer upon the formation of the DNA-RNA duplex on the electrode surface. The stepwise biosensor preparation was characterized by surface and electrochemical techniques showing the role played by each biosensor component as well as the reliability of the target miRNA determination. The determination of the oncogene miRNA-21 synthetic target allowed quantification in the low femtomolar range (LOD of 5 fM) with a high discrimination of single-base mismatched sequences in a single 30-min incubation step. The bioplatform allowed the determination of the target miRNA in a small amount of total RNA extracted from breast cancer (BC) cells or directly in serum samples collected from BC patients without the need for prior extraction, purification, amplification, or reverse transcription of the genetic material and with no matrix effect. Graphical abstract.

A disposable enzyme-free biosensing platform for the sensitive and selective voltammetric determination of miRNAs is reported. The bioplatform implies a sandwich-type hybridization configuration involving the use of two synthetic DNA probes that hybridize contiguously with the target miRNA-21. A thiolated capture probe was immobilized through thiol chemistry on disposable carbon electrodes modified with a hybrid nanomaterial composed of reduced graphene oxide (rGO) and gold nanoparticles (AuNPs). A biotinylated detection probe was conjugated with ferrocene-capped AuNPs modified with streptavidin (Fc-AuNPs-Strep) which were used as labeling nanocarriers. The extent of the hybridization event was followed by differential pulse voltammetric measurement of the Fc oxidation peak. Under the optimized conditions, the developed biosensor provides attractive characteristics for the determination of the synthetic target miRNA, with a linear range between 10 fM and 2 pM and a limit of detection (LOD) of 5 fM, fully discrimination towards a highly homologous miRNA (with just one mismatched base) and a storage stability of at least two months. The biosensor was able to determine accurately the target miRNA directly in scarcely diluted serum from breast cancer (BC) patients with no need for a previous total RNA (RNA t ) extraction and in a very small amount of RNA t extracted from breast adenocarcinoma cells without the need for amplification or reverse transcription to complementary DNA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In this work, we combined a hierarchical nano-array effect of silicon nanowires (SiNWs) with a metallic surface of silver nanoparticles (AgNPs) to design a surface-enhanced Raman spectroscopy (SERS) scattering substrate for sensitive detection of Rhodamine 6G (R6G) which is a typical dye for fluorescence probes. The SiNWs were prepared by Metal-Assisted Chemical Etching (MACE) of n-Si (100) wafers. The Doehlert design methodology was used for planning the experiment and analyzing the experimental results. Thanks to this methodology, the R6G SERS response has been optimized by studying the effects of the silver nitrate concentration, silver nitrate and R6G immersion times and their interactions. The immersion time in R6G solution stands out as the most of influential factor on the SERS response.

During the solar minimum, when the Sun is at its least active, the solar wind 1,2 is observed at high latitudes as a predominantly fast (more than 500 kilometres per second), highly Alfvénic rarefied stream of plasma originating from deep within coronal holes. Closer to the ecliptic plane, the solar wind is interspersed with a more variable slow wind 3 of less than 500 kilometres per second. The precise origins of the slow wind streams are less certain 4 ; theories and observations suggest that they may originate at the tips of helmet streamers 5,6 , from interchange reconnection near coronal hole boundaries 7,8 , or within coronal holes with highly diverging magnetic fields 9,10 . The heating mechanism required to drive the solar wind is also unresolved, although candidate mechanisms include Alfvén-wave turbulence 11,12 , heating by reconnection in nanoflares 13 , ion cyclotron wave heating 14 and acceleration by thermal gradients 1 . At a distance of one astronomical unit, the wind is mixed and evolved, and therefore much of the diagnostic structure of these sources and processes has been lost. Here we present observations from the Parker Solar Probe 15 at 36 to 54 solar radii that show evidence of slow Alfvénic solar wind emerging from a small equatorial coronal hole. The measured magnetic field exhibits patches of large, intermittent reversals that are associated with jets of plasma and enhanced Poynting flux and that are interspersed in a smoother and less turbulent flow with a near-radial magnetic field. Furthermore, plasma-wave measurements suggest the existence of electron and ion velocity-space micro-instabilities 10,16 that are associated with plasma heating and thermalization processes. Our measurements suggest that there is an impulsive mechanism associated with solar-wind energization and that micro-instabilities play a part in heating, and we provide evidence that low-latitude coronal holes are a key source of the slow solar wind.

The prediction of a supersonic solar wind 1 was first confirmed by spacecraft near Earth 2,3 and later by spacecraft at heliocentric distances as small as 62 solar radii 4 . These missions showed that plasma accelerates as it emerges from the corona, aided by unidentified processes that transport energy outwards from the Sun before depositing it in the wind. Alfvénic fluctuations are a promising candidate for such a process because they are seen in the corona and solar wind and contain considerable energy 5-7 . Magnetic tension forces the corona to co-rotate with the Sun, but any residual rotation far from the Sun reported until now has been much smaller than the amplitude of waves and deflections from interacting wind streams 8 . Here we report observations of solar-wind plasma at heliocentric distances of about 35 solar radii 9-11 , well within the distance at which stream interactions become important. We find that Alfvén waves organize into structured velocity spikes with duration of up to minutes, which are associated with propagating S-like bends in the magnetic-field lines. We detect an increasing rotational component to the flow velocity of the solar wind around the Sun, peaking at 35 to 50 kilometres per second-considerably above the amplitude of the waves. These flows exceed classical velocity predictions of a few kilometres per second, challenging models of circulation in the corona and calling into question our understanding of how stars lose angular momentum and spin down as they age 12-14 .

Remote observations of the solar photospheric light scattered by electrons (the K-corona) and dust (the F-corona or zodiacal light) have been made from the ground during eclipses 1 and from space at distances as small as 0.3 astronomical units 2-5 to the Sun. Previous observations 6-8 of dust scattering have not confirmed the existence of the theoretically predicted dust-free zone near the Sun 9-11 . The transient nature of the corona has been well characterized for large events, but questions still remain (for example, about the initiation of the corona 12 and the production of solar energetic particles 13 ) and for small events even its structure is uncertain 14 . Here we report imaging of the solar corona 15 during the first two perihelion passes (0.16-0.25 astronomical units) of the Parker Solar Probe spacecraft 13 , each lasting ten days. The view from these distances is qualitatively similar to the historical views from ground and space, but there are some notable differences. At short elongations, we observe a decrease in the intensity of the F-coronal intensity, which is suggestive of the long-sought dust free zone 9-11 . We also resolve the fine-scale plasma structure of very small eruptions, which are frequently ejected from the Sun. These take two forms: the frequently observed magnetic flux ropes 12,16 and the predicted, but not yet observed, magnetic islands 17,18 arising from the tearing-mode instability in the current sheet. Our observations of the coronal streamer evolution confirm the large-scale topology of the solar corona, but also reveal that, as recently predicted 19 , streamers are composed of yet smaller substreamers channelling continual density fluctuations at all visible scales.

In this work, we report on the design of an enzyme-less sensitive and selective electrochemical electrode for ascorbic acid (AA) detection using a modified screen-printed electrode of melanin-like nanoparticles (Mel-NPs). Cyclic voltammetry shows that the melanin-modified electrode exhibits high electrocatalytic activity for ascorbic acid. The melanin-like nanoparticles serve as a shuttle to transport electrons from ascorbic acid to the electrode surface. The modified electrode is endowed with a large dynamic window ranging from 5 to 500 ppb. The detection and quantification limits were estimated to be 0.07 and 0.23 ppb, respectively. The modified electrode was successfully used to determine AA in human blood serum, urine and saliva with satisfactory recovery levels., Competing Interests: On behalf of all authors, the corresponding authors state that there is no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Herein, we report the design of a novel label-free aptasensor based on ferrocene and silicon nanoparticles (SiNPs) for ultrasensitive detection of aflatoxin M1 (AFM1) in milk. Given that silicon nanomaterials stand out by their high capacitive power, we used them to develop a novel capacitive transduction system based on electrochemical capacitance spectroscopy (ECS). This strategy relies on the changes of the redox capacitance signal owed to the surface-tethered ferrocene film, by performing electrochemical impedance spectroscopy (EIS) measurements without using an external redox probe. The redox capacitance variation was found to correlate well with the increasing concentrations of AFM1 in the linear range from 10 to 500 fmol⋅L -1 with a sensitivity of 0.46 μF*fM-1*cm - 2. Furthermore, the aptasensor allowed to reach very low limits of detection and quantification equal to 4.53 fM and 14.95 fM, respectively. The platform revealed a high selectivity toward the target analyte, and it was applied to quantify very low concentrations of AFM1 in commercial pasteurized milk. Finally, the results of real sample analysis were successfully gauged against those obtained using commercially available enzyme-linked immunoassay (ELISA) kits., (Copyright © 2018 Elsevier B.V. All rights reserved.)

In this work, we achieved the selective detection of wild and mutated rpoB gene in M. tuberculosis using an electrochemical DNA (E-DNA) sensor based on polypyrrole/Fe 3 O 4 nanocomposite bearing redox naphthoquinone tag on PAMAM (spaNQ/PAMAM/PPy/Fe 3 O 4 ). The hybridization between a given probe and the complementary DNA target induced a large decrease in the naphthoquinone redox signal as measured by SWV and no cross-hybridization with single nucleotide mismatch DNA target occurred. Thanks to the catalytic properties of iron oxide nanoparticles combined with conducting properties of polypyrrole platform, we demonstrated that the transducing system allowed the detection of 1 fM of DNA target in a 50-µL drop corresponding to 3 × 10 4 copies of DNA. The sensor was able to detect the rpoB gene in PCR-amplified samples of genomic DNA and could also discriminate between the wild type rpoB gene and a single nucleotide mutated rpoB gene that provides resistance to rifampicin. Furthermore, the sensor could selectively detect the wild and mutant DNA in genomic samples without PCR amplification., (Copyright © 2018. Published by Elsevier B.V.)

Electrically addressed covalent immobilization of biomolecules to the defined electrodes of an electrode array is described. It is based on Michael addition of the thiol group of biomolecules to α,β-unsaturated carbonyl groups of benzoquinone. This "click" reaction was tested by immobilization of a number of thiolated compounds on the simplest array consisting of two gold electrodes coated by a self-assembled monolayer of benzoquinone-terminated hexanethiol. Electrically controlled binding of hexanethiol, ferrocenylhexanethiol, human serum albumin and thiol-terminated single-stranded DNA (ssDNA) was investigated. The binding was studied using cyclic voltammetry, X-ray photoelectron spectroscopy and surface plasmon resonance. The reaction requires the oxidized state of the benzoquinone moiety; this can be reached by applying of a moderate anodic potential to the electrode. Surface plasmon resonance measurements demonstrated that the thiol-modified ssDNA immobilized by this technique binds complementary synthetic oligonucleotides or PCR-amplified DNA fragments. The developed technology of electrical addressing of covalent immobilization can be applied for fabrication of sensor arrays., (Copyright © 2018 Elsevier B.V. All rights reserved.)

New dual electrochemical and fluorescence sensitive curcumin-graphene quantum dots sensing platform coated on the transparent Indium-Tin-Oxide electrode was developed to sense APOe4 DNA, responsible of Alzheimer's disease. Curcumin molecule with its dual fluorescence and electrochemical properties was electropolymerized on GQDs-ITO surface. EDC/NHS chemistry was used to covalently immobilize an amino-substituted DNA probe via a malonic acid spacer. Quenching of curcumin signals following hybridized DNA complex was employed to quantify APOe4 DNA. Amperometric studies revealed an ultrasensitive behavior toward the formation of DNA complex with a sensitivity of 4.74 nA.mL.pg -1 and a limit of detection as low as 0.48 pg mL -1 . The platform exhibits very good performances such as repeatability, reproducibility, selectivity and long storage stability. Fluorescence results were established for the support and the complementarity of electrochemical results. Founded results confirmed the ultrasensitivity of platform with comparable performances. Recorded results in human blood plasma demonstrated the high efficacy of curcumin system sensing even in the clinical matrix., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Rapid and sensitive detection of low levels of scorpion venom toxins in biological fluids is of tremendous importance for decision-taking in cases of envenomation by scorpions stings. In Tunisia, at least 1200 severe envenomation cases by Androctonus australis hector (Aah) scorpion stings were reported annually. In this work, we report on a novel electrochemical immuno-sandwich to detect the Aah50 toxic fraction within the Aah scorpion venom using the bispecific nanobody format specially designed to highly recognize and neutralize the two most toxic molecules in the AahG50 venom fraction (i.e. AahI and AahII toxins), graphene quantum dots (GQDs) constructed on the surface carbon screen-printed electrodes. Hydroquinone/H 2 O 2 /peroxidase system was used to amplify the current in order to achieve the detection of low levels of AahG50. Electrochemical studies revealed a high sensitivity toward the AahG50 with a sensitivity of 18.2 nA mL pg -1 and a picomolar limit of detection as low as 0.55 pg mL -1 . The platform exhibits very good metrological performances such as repeatability, reproducibility, selectivity and long storage stability. Matrix effect was found to be insignificant as demonstrated by assays performed in human blood serum and urine., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The authors describe a method for electrochemical determination of the breast cancer biomarker α-lactalbumin (α-LA) using disposable screen-printed carbon electrodes (SPCEs). Lysozyme-conjugated Fe 3 O 4 nanoparticles (Lys-Fe 3 O 4 NPs) were used to capture α-LA on the surface of the SPCEs which then is trapped in an immunosandwich using secondary antibodies labeled with ferrocene-modified gold nanoparticles. The amperometric response of ferrocene (recorded at +0.1 V vs. silver pseudo-reference electrode) as well as the electrocatalytic activity of gold nanoparticles on the hydrogen evolution reaction (recorded at -1.0 V Vs Ag pseudo-reference electrode) was exploited to sense α-LA. A sensitive voltammetric response is observed, with (a) a sensitivity of 0.8789 μA·nM -1 .cm -2 , (b) a detection limit (LOD, at S/N = 3) as low as 0.07 ng·mL -1 , and (c) linear response in the 0.75 to 630 ng mL -1 α-LA concentration range. The assay is selective and reproducible, and the SPCEs have good storage stability. The SPCEs were applied (a) to the analysis of (spiked) maternal milk, (b) of spiked serum from healthy and pregnant persons, and (c) of serum of patients suffering from breast cancer. Graphical abstract Schematic presentation of a sensitive electrochemical immunoassay platform based on ferrocene modified gold nanoparticles and lysozyme modified magnetic beads for the determination of alpha lactalbumin in human sera and breast milk by the amperometric response of ferrocene and hydrogen evolution reaction.

This paper describes a disposable amperometric biosensor for simple and sensitive determination of miRNA-21. The bioplatform consists of gold nanoparticles-nanostructured electrode surfaces on which a direct hybridization assay involving the immobilization of a specific thiolated DNA capture probe and recognition of the formed DNA-miRNA-21 heteroduplex by a specific antibody is implemented. The antibody is further recognized through its Fc region by a commercial bacterial protein containing 40 units of horseradish peroxidase (HRP) (ProtA-polyHRP40). The amperometric detection of the hybridization process using the H 2 O 2 /hydroquinone system allows quantification of the target miRNA in the 0.096-25 pM linear range with a detection limit of 29 fM (0.29 amol in 10 μL of sample). The bioplatform offers excellent selectivity against noncomplementary sequences and very acceptable against sequences with an unpaired base (only 30% of the response obtained for the target miRNA). In addition, the bioplatform was shown to be useful for the determination of the endogenous content of the target oncomiR directly in blood serum from breast cancer patients and in breast cancer cells using only 10 ng of total extracted RNA., Competing Interests: The authors declare no competing financial interest.

This work reports an amperometric biosensor for the determination of miRNA-21, a relevant oncogene. The methodology involves a competitive DNA-target miRNA hybridization assay performed on the surface of magnetic microbeads (MBs) and amperometric transduction at screen-printed carbon electrodes (SPCEs). The target miRNA competes with a synthetic fluorescein isothiocyanate (FITC)-modified miRNA with an identical sequence for hybridization with a biotinylated and complementary DNA probe (b-Cp) immobilized on the surface of streptavidin-modified MBs (b-Cp-MBs). Upon labeling, the FITC-modified miRNA attached to the MBs with horseradish peroxidase (HRP)-conjugated anti-FITC Fab fragments and magnetic capturing of the MBs onto the working electrode surface of SPCEs. The cathodic current measured at -0.20 V (versus the Ag pseudo-reference electrode) was demonstrated to be inversely proportional to the concentration of the target miRNA. This convenient biosensing method provided a linear range between 0.7 and 10.0 nM and a limit of detection (LOD) of 0.2 nM (5 fmol in 25 μL of sample) for the synthetic target miRNA without any amplification step. An acceptable selectivity towards single-base mismatched oligonucleotides, a high storage stability of the b-Cp-MBs, and usefulness for the accurate determination of miRNA-21 in raw total RNA (RNA t ) extracted from breast cancer cells (MCF-7) were demonstrated., Competing Interests: The authors declare no conflict of interest.

In this paper, we report the development of an environmental friendly process to decontaminate uranium-containing ores and nuclear wastes by using non-fluorinated ionic liquids (ILs). The main advantages of this extraction process are the absence of any organic diluent and extra extraction agents added to the organic phase. Moreover, the process is cost-effective and maybe applied as a sustainable hydrometallurgical method to recover uranium. The distribution ratio (D U ) and the extraction efficiency (%E) of uranium(VI) (UO 2 2+ ) were found to be dependent on the acidity of the aqueous phase, the extraction time, the alkyl chain length in the ILs, the concentration of the aqueous feed and molar quantity of ILs. The D U value is higher than 600 and the %E is equal to 98.6% when [HNO 3 ]=7M. The extraction reactions follows a neutral partition or ionic exchange mechanism depending on nitric acid concentration. The nature of bonding in the extracted complexes was investigated by spectroscopic techniques. The potential use of Mor 1-8 -OP for the separation of UO 2 2+ from a mixture containing transition metal ions M n+ was also examined. The UO 2 2+ ions were separated and extracted efficiently. These ILs are promising candidates for the recovery and separation of uranium., (Copyright © 2017 Elsevier B.V. All rights reserved.)

We report on the design of an amperometric tyrosinase-based biosensor using a self-assembled monolayer of ω-mercaptopropyl naphthoquinone on gold electrode as an electron mediator. Under optimal conditions (i.e. pH=7.4 and E=-0.35V vs. KCl), the chronoamperometric response of the naphthoquinone-modified bioelectrode to successive additions of phenol was evaluated. The biosensor exhibits sensitive bioelectrocatalytic response at a working potential of -0.35V vs. Ag/AgCl (sat.KCl), reaching the steady-state current within 40s after each addition of phenol solution with a range of 0-135μM and a limit of detection and quantification which are 0.019μM and 0.0633μM, respectively. The bioelectrode was used to determine the content in polyphenol in a local virgin olive oil., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A novel label-free electrochemical strategy for nucleic acid detection was developed by using gold electrodes coated with mesoporous silica thin films as sensing interface. The biosensing approach relies on the covalent attachment of a capture DNA probe on the surface of the silica nanopores and further hybridization with its complementary target oligonucleotide sequence, causing a diffusion hindering of an Fe(CN)6 (3-/4-) electrochemical probe through the nanochannels of the mesoporous film. This DNA-mesoporous silica thin film-modified electrodes allowed sensitive (91.7 A/M) and rapid (45 min) detection of low nanomolar levels of synthetic target DNA (25 fmol) and were successfully employed to quantify the endogenous content of Escherichia coli 16S ribosomal RNA (rRNA) directly in raw bacterial lysate samples without isolation or purification steps. Moreover, the 1-month stability demonstrated by these biosensing devices enables their advanced preparation and storage, as desired for practical real-life applications. Graphical abstract Mesoporous silica thin films as scaffolds for the development of novel label-free electrochemical genosensors to perform selective, sensitive and rapid detection of target oligonucleotide sequences. Application towards E. coli determination.

A novel ferrocene-functionalized reduced graphene oxide (rGO)-based electrode is proposed. It was fabricated by the drop casting of ferrocene-functionalized graphene onto polyester substrate as the working electrode integrated within screen-printed reference and counter electrodes. The ferrocene-functionalized rGO has been fully characterized using FTIR, XPS, contact angle measurements, SEM and TEM microscopy, and cyclic voltammetry. The XPS and EDX analysis showed the presence of Fe element related to the introduced ferrocene groups, which is confirmed by a clear CV signal at ca. 0.25 V vs. Ag/AgCl (0.1 KCl). Mediated redox catalysis of H2O2 and bio-functionalization with glucose oxidase for glucose detection were achieved by the bioelectrode providing a proof for potential biosensing applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The demand for on-site nanodevices is constantly increasing. The technology development for the design of such devices is highly regarded. In this work, we report the design of a disposable platform that is structured with cauliflower-shaped gold nanoparticles (cfAuNPs) and we show its applications in immunosensing and enzyme-based detection. The electrochemical reduction of Au(III) allows for the electrodeposition of highly dispersed cauliflower-shaped gold nanoparticles on the surface of screen-printed carbon electrodes (SPCEs). The nanostructures were functionalized using ferrocenylmethyl lipoic acid ester which allowed for the tethering of the ferrocene group to gold, which serves as an electrochemical transducer/mediator. The bioconjugation of the surface with anti-human IgG antibody (α-hIgG) or horseradish peroxidase (HRP) enzyme yields biosensors, which have been applied for the selective electrochemical detection of human IgG (hIgG) or H2O2 as model analytes, respectively. Parameters such as the number of sweeps, amount of charge generated from the oxidation of the electrodeposited gold, time of incubation and concentration of the ferrocene derivatives have been studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Selectivity and specificity tests have been also performed in the presence of potentially interfering substances to either hIgG or H2O2. Results showed that the devised immunosensor is endowed with good selectivity and specificity in the presence of several folds of competitive analytes. The enzyme-based platform showed a good catalytic activity towards H2O2 oxidation which predestined it to potential applications pertaining to enzymatic kinetics studies. The levels of hIgG in human serum and H2O2 in honey were successfully determined and served as assessment tools of the applicability of the platforms for real samples analysis.

Here, we report a new synthetic route for spherical small copper nanoparticles (CuNPs) with size ranging from 3.5 nm to 11 nm and with an unprecedented associated monodispersity (<10%). This synthesis is based on the reduction of an organometallic precursor (CuCl(PPh3)3) by tert-butylamine borane in the presence of dodecylamine (DDA) at a moderate temperature (50 to 100 °C). Because of their narrow size distribution, the CuNPs form long-range 2D organizations (several μm(2)). The wide range of CuNPs sizes is obtained by controlling the reaction temperature and DDA-to-copper phosphine salt ratio during the synthesis process. The addition of oleic acid (OA) after the synthesis stabilizes the CuNPs (no coalescence) for several weeks under a nitrogen atmosphere. The nature and the reactivity of the ligands were studied by IR and UV-visible spectroscopy. We thus show that just after synthesis the nanoparticles are coated by phosphine and DDA. After adding OA, a clear exchange between phosphine and OA is evidenced. This exchange is possible thanks to an acid-base reaction between the free alkylamine in excess in the solution and OA. OA is then adsorbed on the NPs surface in the form of carboxylate. Furthermore, the use of oleylamine (OYA) instead of DDA as the capping agent allows one to obtain other NP shapes (nanorods, triangles and nanodisks). We get evidence that OYA allows the selective adsorption of chloride ions derived from the copper precursor on the different crystallographic faces during the growth of CuNPs that induces the formation of anisotropic shapes such nanorods or triangles.

The condensation of 1,1'-ferrocenedimethanol and lipoic acid yields a ferrocene derivative (FcD): 1,1'-ferrocenyl bis(methylene lipoic acid ester), a bipodant linker which was used to aggregate gold nanoparticles (AuNPs). The FcD/AuNP aggregations displayed a very well-resolved signal related to the ferrocene oxidation to ferrocenium. The aggregates were found to form an efficient transducing system for a novel concept of immunosensing based on the shifting of the ferrocene oxidation potential. αHIgG/FcD/AuNP or chicken αGIgG/FcD/AuNP bioconjugates are used along with carbon SPEs as an immunosensing platform for the detection of HIgG or GIgG as model analytes. As shown by CV and DPV, the antigens addition triggers significant anodic potential shifts (up to 75 mV) of the ferrocene oxidation peak as an immunoresponse for the Ag-Ab recognition. The results from selectivity and specificity experiments using bovine serum albumin, ovalbumin and α-lactalbumin as potentially interfering proteins to HIgG Ag showed that these potential shifts would be solely due to the Ag-Ab recognition events with excellent selectivity and specificity in the presence of up to 1000-fold of the competitive proteins.

An in situ and real-time electrochemical method has been devised for quantitatively monitoring the self-assembly of a ferrocene-labeled cyclic disulfide derivative (i.e., a thioctic acid derivative) on a polycrystalline gold electrode under electrode polarization. Taking advantage of the high sensitivity, specificity, accuracy, and temporal resolution of this method, we were able to demonstrate an unexpectedly facilitated formation of the redox-active SAM when the electrode was held at a moderate cathodic potential (-0.4 V vs SCE in CH3CN), affording a saturated monolayer from only micromolar solutions in less than 10 min, and a totally impeded SAM growth when the electrode was polarized at a slightly anodic potential (+0.5 V vs SCE in CH3CN). This method literally allows for switching on/off the formation of SAMs under "soft" conditions. Moreover the cyclic disulfide-based SAM was completely desorbed at this potential contrary to the facilitated deposition of a ferrocene-labeled alkanethiol. Such a strikingly contrasting behavior could be explained by an energetically favored release of the thioctic-based SAM through homolytic cleavage of the Au-S bond followed by intramolecular cyclization of the generated thiyl diradicals. Moreover, the absence of a discernible transient faradaic current response during the potential-assisted adsorption/desorption of the redox-labeled cyclic disulfide led us to conclude in a potential-dependent reversible surface reaction where no electron is released or consumed. These results provide new insights into the formation of disulfide-based SAMs on gold but also raise some fundamental questions about the intimate mechanism involved in the facilitated adsorption/desorption of SAMs under electrode polarization. Finally, the possibility to easily and selectively address the formation/removal of thioctic-based SAMs on gold by applying a moderate cathodic/anodic potential offers another degree of freedom in tailoring their properties and in controlling their self-assembly, nanostructuration, and/or release.

We measured single-molecule conductances for three different redox systems self-assembled onto gold by the STMBJ method and compared them with electrochemical heterogeneous rate constants determined by ultrafast voltammetry. It was observed that fast systems indeed give higher conductance. Monotonous dependency of conductance on potential reveals that large molecular fluctuations prevent the molecular redox levels to lie in between the Fermi levels of the electrodes in the nanogap configuration. Electronic coupling factors for both experimental approaches were therefore evaluated based on the superexchange mechanism theory. The results suggest that coupling is surprisingly on the same order of magnitude or even larger in conductance measurements whereas electron transfer occurs on larger distances than in transient electrochemistry., (© 2011 American Chemical Society)

We report a new spectroscopic fingerprint of intermolecular contacts in halogen bond-driven self-assembling aggregates and a precise determination of intermolecular NI distances in microcrystalline samples.