Search

Transferring the intraoral situation accurately to the dental laboratory is crucial for fabricating precise restorations. This study aimed to compare the dimensional accuracy of a new hydrophilic quadrofunctional vinyl polysiloxane (VPS) and polyether (PE), in combination with different impression techniques (mono-phase single step or dual-phase single step). The reference model simulated a partially edentulous mandible. Stainless-steel precision balls were welded to specific teeth and were used to detect dimensional deviations. Fifteen impressions were made for each of the following four test groups: (1) VPS mono-phase, (2) PE mono-phase, (3) VPS dual-phase, and (4) PE dual-phase. Global accuracy was measured by deviations from the reference model, while local accuracy focused on the trueness and precision of abutment tooth surfaces. Statistical analysis was conducted using ANOVA (α = 0.05). All distances were underestimated, with the highest global inaccuracies for the cross-arch distance, ranging from -82 µm to -109 µm. The abutment tooth surfaces showed excellent local accuracy for all the materials and techniques, with crown surface trueness < 10 µm and precision < 12 µm. Inlay surfaces had higher inaccuracies (trueness < 15 µm, precision < 26 µm). Within the limitations of this study, all impression materials and techniques can be used to produce models with clinically acceptable accuracy.

Purpose: This study aimed to analyze how the wall thickness of 3D-printed hollow zirconia teeth affects shape accuracy., Methods: Datasets with measurement points were created for different artificial teeth resembling the mandibular right first molar (Geomagic Design X, 3D Systems). Reference distances were 9.8 mm for mesio-distal direction (M-D), 10.9 mm for bucco-lingual direction (B-L), 7.0 mm for MB-BB and DB-BB, and 4.5 mm for ML-LB and DL-LB. The outer geometry was identical for all artificial teeth with wall thicknesses of 0.30, 0.50, 0.75, and 1.00 mm. Twenty zirconia teeth were fabricated using a 3D printer (CeraFab 7500 Dental, Lithoz) for each group and sintered before support removal. After performing analog distance measurements using a micrometer screw, the digital distance measurements and angular deviations between measurement points on 3D scans were analyzed. Possible effects were investigated using nonparametric ANOVA, followed by Tukey's honest significant difference (HSD) test for multiple comparisons., Results: The shape accuracy was acceptable for artificial teeth with wall thicknesses of ≥0.5 mm. The largest distance deviation was observed for a wall thickness of 0.3 mm. In particular, DB-BB showed a median deviation of >56.2 µm, which is significantly larger than that for other test groups, ranging from 7.4-9.5 µm (P < 0.05). In most cases, angular deviations were the largest for teeth with 0.3-mm wall thickness (11.6°) and remained below 5.0° for the other test groups., Conclusions: Acceptable accuracy was obtained for artificial teeth with wall thicknesses of at least 0.5 mm.

This study aimed to assess the suitability of printed zirconia (ZrO 2 ) for adhesive cementation compared to milled ZrO 2 . Surface conditioning protocols and disinfection effects on bond strength were also investigated. ZrO 2 discs (n = 14/group) underwent either alumina (Al 2 O 3 ) airborne particle abrasion (APA; 50 µm, 0.10 MPa) or tribochemical silicatisation (TSC; 110 µm Al 2 O 3 , 0.28 MPa and 110 µm silica-modified Al 2 O 3 , 0.28 MPa), followed by disinfection (1 min immersion in 70% isopropanol, 15 s water spray, 10 s drying with oil-free air) for half of the discs. A resin cement containing 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) was used for bonding (for TSC specimens after application of a primer containing silane and 10-MDP). Tensile bond strength was measured after storage for 24 h at 100% relative humidity or after 30 days in water, including 7500 thermocycles. Surface conditioning significantly affected bond strength, with higher values for TSC specimens. Ageing and the interaction of conditioning, disinfection and ageing also impacted bond strength. Disinfection combined with APA mitigated ageing-related bond strength decrease but exacerbated it for TSC specimens. Despite these effects, high bond strengths were maintained even after disinfection and ageing. Adhesive cementation of printed ZrO 2 restorations exhibited comparable bond strengths to milled ZrO 2 , highlighting its feasibility in clinical applications.

The aim of this paper was to evaluate the fracture resistance of 3D-printed zirconia occlusal veneers (OVs) of different thicknesses and supported by different abutment materials. Materials and Methods: The standard OV of a natural molar was prepared and digitized using a laboratory 3D scanner. The resulting digital tooth abutment was milled either using cobalt-chromium (CoCr) or a fiber-reinforced composite (FRC). All the abutments were digitized and standardized OVs (30° tilt of all the cusps) designed with 0.4 mm, 0.6 mm, or 0.8 mm wall thicknesses. The OVs were fabricated using either the Programill PM7 milling device (Ivoclar Vivadent, PM) or one of two 3D zirconia printers, Cerafab 7500 (Lithoz, LC) or Zipro-D (AON, ZD). The ZD samples were only tested on CoCr abutments. The completed OVs were luted to their abutments and subjected to artificial aging, consisting of thermocycling and chewing simulation before fracture testing with a steel sphere (d = 8 mm) as an antagonist with three contact points on the occlusal OV surface. Besides the total fracture resistance F u,tot , the lowest contact force F u,cont leading to the local fracture of a cusp was of interest. The possible effects of the factors fabrication approach, wall thickness, and abutment material were evaluated using ANOVA (α = 0.05; SPSS Ver.28). Results: The total fracture resistance/contact forces leading to failure ranged from F u,tot = 416 ± 83 N/F u,cont = 140 ± 22 N for the 0.4 mm OVs fabricated using LC placed on the FRC abutments to F u,tot = 3309 ± 394 N (ZD)/F u,cont = 1206 ± 184 N (PM) for the 0.8 mm thick OVs on the CoCr abutments. All the factors (the fabrication approach, abutment material, and OV wall thickness) had an independent effect on F u,tot as well as F u,cont ( p < 0.032). In pairwise comparisons for F u,tot of the OVs luted to the CoCr abutments, the ZD samples statistically outperformed the LC- and PM-fabricated teeth irrespective of the thickness ( p < 0.001). Conclusions: Within the limitations of this study, the printed occlusal veneers exhibited comparable fracture resistances to those of the milled variants. However, more resilient abutments (FRC as a simulation of dentine) as well as a thinner wall thickness led to reduced OV fracture resistance, suggesting that 0.4 mm thick zirconia OVs should not be unreservedly used in every clinical situation.

Purpose: To generate data on the long-term survival of metal-ceramic resin-bonded fixed partial dentures (RBFPDs)., Materials and Methods: A total of 89 patients received 94 RBFPDs, 5 of whom (women n = 1; men n = 4) received 2 RBFPDs each. All RBFPDs were fabricated as two-retainer end-abutment metal-ceramic restorations. Clinical follow-ups were performed 6 months after cementation and then annually thereafter. The mean observation time was 7.5 years. Cox regression was performed to test the effects of the variables: gender, location, arch, design, use of rubber dam, and adhesive luting system. Survival and success were calculated using Kaplan-Meier curves. As a secondary objective, patient and dentist satisfaction with the esthetics and function of the RBFPDs was evaluated. The significance level was set at α = .05 for all calculations., Results: Estimated Kaplan-Meier failure-free survival was 97.5% (standard error [SE] 1.7) after 5 years and 83.3% (SE 5.3) after 10 years. Calculated intervention-free survival (success) was 90.1% (SE 3.4) after 5 years and 65.5% (SE 6.7) after 10 years. Debonding-free survival was 92.6% (SE 2.9) after 5 years and 80.6% (SE 5.4) after 10 years. Cox regression revealed that none of the four tested variables had a significant effect on the incidence of complications in RBFPDs. Patient and dentist satisfaction with RBFPD esthetics and function was consistently high throughout the observation period., Conclusions: Within the limitations of an observational study, RBFPDs achieved clinically successful outcomes over a mean observational period of 7.5 years.

The efficacy of retainers is a pivotal concern in orthodontic care. This study examined the biomechanical behaviour of retainers, particularly the influence of retainer stiffness and tooth resilience on force transmission and stress distribution. To do this, a finite element model was created of the lower jaw from the left to the right canine with a retainer attached on the oral side. Three levels of tooth resilience and variable retainer bending stiffness (influenced by retainer type, retainer diameter, and retainer material) were simulated. Applying axial or oblique (45° tilt) loads on a central incisor, the force transmission increased from 2% to 65% with increasing tooth resilience and retainer stiffness. Additionally, a smaller retainer diameter reduced the uniformity of the stress distribution in the bonding interfaces, causing concentrated stress peaks within a small field of the bonding area. An increase in retainer stiffness and in tooth resilience as well as a more oblique load direction all lead to higher overall stress in the adhesive bonding area associated with a higher risk of retainer bonding failure. Therefore, it might be recommended to avoid the use of retainers that are excessively stiff, especially in cases with high tooth resilience.

Statement of Problem: Precise data are a prerequisite for accurately fitting restorations. Therefore, intraoral scanners have to be reliable. Data on differences between the same model of intraoral scanning systems are lacking., Purpose: This in vitro study evaluated differences in the scanning accuracy of a partially edentulous maxilla between combinations of new intraoral scanners of a single model from the same manufacturer (Primescan; Dentsply Sirona) and several calibration aids., Material and Methods: The in vitro reference model simulated a maxilla with 6 prepared teeth for a complete arch fixed partial denture. Five precision ceramic balls were used to detect dimensional deviation between the reference model and the scan. Distances were divided into 4 categories, from short distances between 2 neighboring precision balls to the cross-arch distance with the scan path comprising all 5 balls. For each combination of 4 new intraoral scanners and their respective calibration aids, 12 model registrations were generated. The data were statistically analyzed using ANOVA (α=.05)., Results: Distance deviations increased with increasing scan path length and were significantly affected by the covariates "scanner" (P≤.023) and, for 3 of 4 distance categories, the "calibration aid" (short, medium, and long distances: P≤.013). For short and medium distances, acceptable scanning results were achieved for all test groups. The largest deviation was 539 µm for the cross-arch distance., Conclusions: Scanning accuracy depends on the scanner and the calibration aid used, in particular, for spans exceeding a single quadrant., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Objectives: To evaluate the effect of accelerated firing on 3D-printed zirconia., Methods: To check if formulae provided by ISO 6872 can be extended to thin samples, finite element analyses were carried out in advance of fabricating 3-mol% yttria-stabilized tetragonal zirconia polycrystal discs by milling and by 3D-printing. Four groups (n = 38 each) of 3D-printed specimens were produced with two nominal thicknesses (0.6 mm and 1.2 mm) and two firing strategies (long: 51 h, accelerated: 14.5 h). In the milled group (thickness 1.2 mm, n = 30), a standard firing program (9.8 h) was selected. Biaxial flexural strength tests were applied and mean strength, characteristic strength, and Weibull modulus were calculated for each group. Differences were analyzed using Welch ANOVA and Dunnett-T3 post-hoc tests., Results: Maximum tensile stresses occurring during biaxial strength testing can be calculated according to ISO 6872 for thin samples with b > 0.3 mm. Variability of measured strengths values was smaller for milled zirconia compared with 3D-printed zirconia. The 1.2-mm-thick 3D-printed samples had significantly decreased strength after accelerated firing than after long firing. However, for the 0.6-mm-thick samples, comparable mean biaxial strength values of about 1000 MPa were measured for both firing protocols., Significance: At the moment, long fabrication time for zirconia restorations is a major drawback of 3D-printing when compared with milling technology. This investigation showed that the strength of 0.6-mm-thick zirconia discs fabricated by 3D-printing was not impaired by accelerated firing. Thus, overnight firing of thin-walled 3D-printed zirconia restorations could be possible., (Copyright © 2023. Published by Elsevier Inc.)

Background and Objectives: The aim of implantoplasty (IP) is to remove titanium implant layers that have been contaminated and to smoothen the implant surfaces so they retain less plaque. However, existing IP methods are very invasive and reduce implant wall thickness., Aim: To investigate the suitability of novel sonic tips in IP and to compare this novel protocol with conventional abrasive procedures., Materials and Methods: Thirty dental implants (Ø 4.1 mm, 10 mm length) were distributed in three groups and investigated according to the protocol of Sivolella et al., with modifications to the instrument's feed rate, the applied contact force, and the speed of implant rotations per minute. The upper third of the implant was processed with a diamond-coated bur (BUR) or novel non-diamond-coated sonic tips (AIRSCALER). After standardized IP, the surfaces were analyzed by tactile profilometry and scanning electron microscopy (SEM). Changes in implant weight, implant material loss, and implant fracture strength were assessed., Results: The mean roughness (R a , S a ), implant material loss, and change in implant weight were significantly lower in the AIRSCALER group than in the BUR group, whereas the mean compression resistance values were significantly higher in the AIRSCALER group than in the BUR group., Conclusions: IP with uncoated sonic tips smoothes the surfaces and reduces structural loss of the implant in the area of microthreads. This new IP method could be of great clinical importance, especially for implants with microthreads and reduced diameter or wall thickness., (© 2024 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

The rehabilitation of free-end situations is a frequent indication in prosthetic dentistry. Cantilever fixed dental prostheses (cFDPs) made of 1st and 2nd generation zirconia are one treatment option. Due to a unique gradient technology, combinations of different zirconium dioxide generations are thus feasible in one restoration. However, data about these materials are rare. The purpose of this study was therefore to investigate the fracture resistance and fracture modes of tooth-supported cFDPs fabricated from different zirconia materials (gradient technology) and different framework thicknesses. A total of 40 cFDPs were fabricated using the CAD/CAM approach and belonged to five test groups. The different groups differed in the yttria content, the proportion of the tetragonal/cubic phases, or in wall thickness (0.7 mm or 1 mm). After completion, the cFDPs were subjected to thermal cycling and chewing simulation (1.2 × 10 6 load cycles, 108 N load). Afterwards, cFDPs were statically loaded until fracture in a universal testing machine. A non-parametric ANOVA was compiled to determine the possible effects of group membership on fracture resistance. In addition, post-hoc Tukey tests were used for bivariate comparisons. The mean fracture loads under axial load application ranged from 288 to 577 N. ANOVA detected a significant impact of the used material on the fracture resistances ( p < 0.001). Therefore, the use of cFDPs fabricated by gradient technology zirconia may not be unreservedly recommended for clinical use, whereas cFPDs made from 3Y-TZP exhibit fracture resistance above possible masticatory loads in the posterior region.

Purpose: To examine the effects of anodization and different surface modifications of titanium on bond strength to 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) resin cement., Materials and Methods: Grade 5 titanium alloy disks (n = 160) were assigned to one of five prebonding surface treatment study groups (polished; polished and anodized; polished, etched, and anodized; sandblasted; sandblasted and anodized). Disks were adhesively bonded with 10-MDP resin cement (Panavia 21; bonding area: 3.3 mm in diameter) to composite resin cylinders. In each study group, tensile bond strength tests were conducted after 24 ± 1 hours and after 6 months (180 ± 2 days) of water storage (n = 16 specimens per water storage subgroup). Debonded specimens were stereomicroscopically analyzed to determine their fracture mode. Statistics included one-way and multifactorial ANOVA and Tukey post hoc tests (α = .05)., Results: Anodization and water storage did not significantly (P ≥ .389) affect tensile bond strength. Although subgroups of polished samples had significantly (P ≤ .031) lower bond strengths (subgroup mean values: 20 to 26 MPa) than etched or sandblasted samples (subgroup mean values: 29 to 33 MPa), they nonetheless exceeded the empirical threshold of 10 MPa used as a criterion for clinical recommendation. The fracture mode of all test specimens was predominantly cohesive., Conclusions: Anodization of titanium surfaces can be performed without weakening the adhesion of 10-MDP-based resin cement to titanium.

Aim: To evaluate the long-term survival, incidence of prosthetic/technical and biological complications and the oral-health-related quality of life in patients with an edentulous mandible who were fitted with overdentures on two immediately loaded implants in the symphyseal area., Materials and Methods: Forty-six patients with edentulous mandibles received two immediately loaded implant-retained dentures with either two Locator attachments or egg-shaped bar attachments. Implant outcomes were recorded after a period of observation of 9 years and included prosthetic complications, modified gingiva index (mGI), modified plaque index (mPI), oral health impact profile (OHIP-G) and radiographic estimation of bone loss., Results: In 2020/2021, 27 patients with 54 implants were still available for follow-up. In total, nine implants in six patients were lost. Survival was 89.1% in the bar group and 91.3% in the Locator group. Implant success was 84.6% in the Locator group and 76.9% in the bar group. The mPI values were significantly higher in the bar group than in the Locator group, whereas no difference was seen in the mGI values. During the observation period, 152 prosthetic complications occurred, but the OHIP-G score did not differ significantly., Conclusions: There was no difference in implant survival between Locator or joint bar attachments over a 9-year observation period. Joint bar attachments were associated with slightly more complications, while patients in the Locator group were able to maintain better oral hygiene. The study was registered in the German Register of Clinical (Trials DRKS00004245)., (© 2023 The Authors. Journal of Clinical Periodontology published by John Wiley & Sons Ltd.)

Purpose: To evaluate fit and retention of cobalt-chromium removable partial denture (RPD) frameworks fabricated with selective laser melting (SLM)., Methods: Three types of framework for clasp-retained RPDs were virtually designed and fabricated using SLM (n = 30). For comparison, 30 additional frameworks were produced using conventional lost-wax casting. A biomechanical model was created, incorporating extracted teeth mounted on flexible metal posts. Using this model, horizontal constraint forces resulting from a misfit were measured using strain gauges, while vertical forces were not recorded. The constraint force components and resultant forces were determined for all abutment teeth, and the maximum retention force during RPD removal from the model was also assessed. For statistical evaluation, the two fabrication methods were analyzed by calculating the means and standard deviations., Results: The average horizontal constraint forces showed similar values for both fabrication methods (SLM: 3.5 ± 1.0 N, casting: 3.4 ± 1.6 N). The overall scatter of data for cast RPDs was greater compared to those fabricated using SLM, indicating a better reproducibility of the SLM process. With regard to retention, the intended retention force of 5-10 N per abutment tooth was not attained in one of the cast groups, while it was consistently achieved in all SLM groups., Conclusions: This in vitro study found that SLM is a promising option for the manufacture of cobalt-chromium RPD frameworks in terms of fit and retention.

Aims: To develop a German version of the Dental Environment Stress (DES) questionnaire, and to evaluate its reliability and validity., Methods: The original English DES questionnaire was translated into German using a forward-backward translation process. To evaluate construct stability, a subgroup of dental students (n = 43) completed the DES twice (interval: 1 week). To evaluate how the DES responds to anticipated changes in stress, all dental students' (n = 64) DES scores and saliva cortisol levels administered from a clinical study were compared between holiday and term time. Furthermore, the Depression, Anxiety and Stress Scale (DASS) and a stress self-assessment were used to determine the validity of the DES. Reliability analyses were calculated using Kendall's tau correlations. To estimate reliability strength, correlation coefficients and intraclass correlations (ICCs) were used., Results: Regarding construct stability, 24 of 25 DES items had at least moderate correlations, and most items showed strong correlations. Correlations for the seven subdomains were good (range: 0.778-1.000). The same was true for the total DES score (ICC: 0.944). Correlations for response to term-time stress were weaker and more varied. Validity analyses revealed fair correlations between the DES and students' self-assessment (Pearson's r = .592) and DASS score (Pearson's r = .392), suggesting satisfactory validity. Stress levels were quite similar between baseline and follow-up., Conclusion: The German DES is a reliable tool for evaluating stress in dental students. Because it can be used to identify individual stressors in various categories, it might enable the detection of specific stress situations in educational situations and facilitate solutions (adjustment of curricula, tailored consulting services)., (© 2022 The Authors. European Journal of Dental Education published by John Wiley & Sons Ltd.)

Objective: To analyze the impact of different post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of additively manufactured zirconia., Methods: Disc-shaped specimens (N = 100) were 3D-printed from 3 mol%-yttria-stabilized zirconia (material: LithaCon 3Y 210; printer: CeraFab 7500, Lithoz) and were cleaned with five different methods (n = 20): (A) 25 s of airbrushing with the dedicated cleaning solution (LithaSol 30®, Lithoz) and 1-week storage in a drying oven (40 °C); (B) 25 s airbrushing (LithaSol 30®) without drying oven; (C) 30 s ultrasonic bath (US) filled with Lithasol30®; (D) 300 s US filled with LithaSol 30®; (E) 30 s US filled with LithaSol 30® followed by 40 s of airbrushing (LithaSol 30®). After cleaning, the samples were sintered. Geometry, transmission, roughness (R a , R z ), characteristic strengths (σ 0 ), and Weibull moduli (m) were analyzed. Statistical analyses were performed using Kolmogorov-Smirnov-, t-, Kruskal-Wallis-, and Mann-Whitney-U-tests (α < 0.05)., Results: Short US (C) resulted in the thickest and widest samples. Highest transmission was found for US combined with airbrushing (E, p ≤ 0.004), followed by D and B (same range, p = 0.070). Roughness was lowest for US combined with airbrushing (E, p ≤ 0.039), followed by A and B (same range, p = 0.172). A (σ 0 = 1030 MPa, m = 8.2), B (σ 0 = 1165 MPa, m = 9.8), and E (σ 0 = 1146 MPa, m = 8.3) were significantly stronger (p < 0.001) and substantially more reliable than C (σ 0 = 480 MPa, m = 1.9) and D (σ 0 = 486 MPa, m = 2.1)., Significance: For 3D-printed zirconia, cleaning strategy selection is important. Airbrushing (B) and short US combined with airbrushing (E) were most favorable regarding transmission, roughness, and strength. Ultrasonic cleaning alone was ineffective (short duration) or detrimental (long duration). Strategy E could be particularly promising for hollow or porous structures., (Copyright © 2023 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Objectives: To compare the clinical performance of occlusal splints printed from thermo-flexible resin with milled splints., Methods: A parallel two-arm pilot trial was initiated. Forty-seven patients (n women=38) were recruited from a tertiary care center and randomized using an online tool (sealed envelope). Inclusion criterion was an indication for treatment with a centric relation occlusal splint due to bruxism or any form of painful temporomandibular disorder. Patients were excluded if they were younger than 18 years, unable to attend follow-up appointments, or required another type of splint therapy. Patients received either, a 3D-printed (intervention group, V-print splint comfort, VOCO) or a milled splint (control group, ProArt CAD splint, Ivoclar). Construction software Ceramill M-splint (AmannGirrbach), 3D-printer MAX UV 385 (Asiga) and milling unit PrograMill PM7 (Ivoclar) were used. Follow-up assessments were conducted after 2 weeks and 3 months. Outcome measures were survival, adherence, technical complications, patient satisfaction on a 10-point Likert scale, and maximum wear using superimposition of optical scans., Results: After 3 months, 20/23 intervention group and 18/24 control group participants were assessed. All splints survived. Minor complications were small crack formations on 6 printed and 4 milled splints. Mean patient satisfaction was 8 (SD 1.7) for printed, and 8.1 (SD 2.3) for milled splints (r = 0.1, p = .52). Median maximum wear was highly dispersed with 153 (IQR 140) in posterior and 195 (IQR 537) in frontal segments of printed, and 96 (IQR 78) respectively, 123 (IQR 155) of milled splints, (both: r = 0.31, p = .084)., Conclusions: Within the limitations of a pilot trial, 3D-printed and milled splints performed similarly in terms of patient satisfaction, complication rates and wear behavior., Clinical Significance: Thermo-flexible material was proposed for 3D printing of occlusal splints to overcome mechanical weaknesses of previously available resins. This randomized pilot study provides evidence that this material is a viable alternative to milled splints for at least three months of clinical use. Further evidence on long-term use should be obtained., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

The treatment of a 57-year-old woman with combined skeletal and pseudo-class III malocclusion who was also suffering from chronic myofascial orofacial pain is described. The challenge was to treat the patient's malocclusion while simultaneously managing the temporomandibular disorder. After a successful 3-month occlusal device therapy, which substantially reduced the patient's discomfort, a nonsurgical therapy by using complete-mouth fixed restorations was planned. The treatment was first tested by using printed interim restorations before monolithic zirconia restorations were provided. Stable occlusion and a pain-free outcome were observed at the 3-month follow-up., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Head and neck pain drawings have been introduced as part of the diagnostic gold standard for temporomandibular disorders (TMD). We aimed to quantify the spatial extent of pain in TMD patients and to analyze its association with further clinical findings. In a cross-sectional study, 90 patients (median age = 38 years; n women = 68) were diagnosed according to the DC/TMD. Intra-articular disorders were either confirmed or rejected by magnetic resonance imaging. The patients shaded all painful areas in a sketch of the left and right side of a face. A grid template was placed over the drawings and each region that contained markings was scored as painful. The correlation between the calculated area and the psychosocial variables (DC/TMD axis II) as well as the influence of pain lateralization were investigated using Spearman correlation, Mann-Whitney-U and chi-square tests. Pain affected all facial areas but concentrated on the regions of the temporomandibular joint and masseter origin. Thirty-nine percent reported purely unilateral pain, which was associated with structural TMJ findings in 77% of cases. Individuals with bilateral pain and those with greater spatial spread of pain had significantly higher scores on all axis II variables, except for functional limitation of the jaw. PERSPECTIVE: Head and neck pain drawings can contribute to a stratification of TMD patients. A greater extent of pain as well as pain bilateralization is associated with higher levels of emotional distress, pain chronicity and somatization, but not with functional impairment. Unilateral reporting of pain is associated with more intra-articular disorders., (Copyright © 2023 United States Association for the Study of Pain, Inc. Published by Elsevier Inc. All rights reserved.)

Objectives: To evaluate oral sequelae after head and neck radiotherapy (RT) when using two different types of intraoral appliances. Thermoplastic dental splints (active control) protect against backscattered radiation from dental structures. Semi-individualized, 3D-printed tissue retraction devices (TRDs, study group) additionally spare healthy tissue from irradiation., Materials and Methods: A total of 29 patients with head and neck cancer were enrolled in a randomized controlled pilot trial and allocated to receive TRDs ( n = 15) or conventional splints ( n = 14). Saliva quality and quantity (Saliva-Check, GC), taste perception (Taste strips, Burghart-Messtechnik), and oral disability (JFLS-8, OHIP-14, maximum mouth opening) were recorded before and 3 months after RT start. Radiotherapy target volume, modality, total dose, fractionation, and imaging guidance were case-dependent. To evaluate intra-group developments between baseline and follow-up, nonparametric Wilcoxon tests were performed. Mann-Whitney-U tests were applied for inter-group comparisons., Results: At follow-up, taste perception was unimpaired (median difference in the total score; TRDs: 0, control: 0). No significant changes were found regarding oral disability. Saliva quantity (stimulated flow) was significantly reduced with conventional splints (median -4 mL, p = 0.016), while it decreased insignificantly with TRDs (median -2 mL, p = 0.07). Follow-up was attended by 9/15 study group participants (control 13/14). Inter-group comparisons showed no significant differences but a tendency towards a better outcome for disability and saliva quality in the intervention group., Conclusion: Due to the small cohort size and the heterogeneity of the sample, the results must be interpreted with reservation. Further research must confirm the positive trends of TRD application. Negative side-effects of TRD application seem improbable.

Objective: To determine the influence of the geometric dimensions of core build-ups on early core build-up failure, that is, loss before definitive prosthesis cementation., Materials and Methods: Adhesive core build-ups of exclusively vital teeth in 114 participants were evaluated (n materials: 40 Rebilda DC, 38 Multicore Flow, 36 Clearfil DC Core; n teeth: 8 incisors, 54 premolars, 52 molars). Impressions of the abutment teeth were made (1) after removal of insufficient restorations/caries and (2) after core build-up and preparation for a fixed prosthesis. Digitized model surfaces of both situations were aligned (Geomagic Design X) and core build-up volume (V CBU ), remaining hard tissue volume (V Abut ), and size of the adhesive surface (A adh ) were assessed. The derived measure d CBU  = V CBU /A adh can be interpreted as mean arithmetic core build-up thickness. Associations between participant or core build-up design characteristics and the occurrence of early failures were statistically evaluated (SPSS v27, α = 0.05)., Results: A total of six (5.3%) core build-up failures were registered. Higher participant age, greater core build-up volume V CBU and greater arithmetic uniform thickness d CBU were associated with a greater incidence of failure in bivariate and univariate, however, not in multivariate statistics., Conclusions: Core build-up volume and thickness were associated with early success or failure., Clinical Significance: In the case of voluminous/thick core build-ups in relation to the adhesive surface, additional measures, such as the preparation of retentive elements to increase the bonding area, might be considered to reduce the risk of early core build-up failure., (© 2022 The Authors. Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Objectives: To determine the reliability and accuracy of intraoral radiography (IR), cone-beam-computed tomography (CBCT), and dental magnetic resonance imaging (dMRI) in measuring peri‑implant bone defects around single zirconia implants., Methods: Twenty-four zirconia implants were inserted in bovine ribs with various peri‑implant defect sizes and morphologies. True defect extent was measured without implant in CBCT. Defects were measured twice in IR, CBCT, and dMRI with the inserted implant by three experienced readers. Reliability was assessed by ICC, accuracy by the Friedman test, and post-hoc-Tukey's test., Results: A comparable good to excellent intra- and inter-reader reliability was observed for all modalities (intra-/inter-rater-CC range for IR; CBCT; dMRI: 0.81-0.91/0.79;0.87-0.97/0.96;0.87-0.95/0.94). Accuracy was generally high, with mean errors below 1 mm in all directions. However, measuring defect depth in the mesiodistal direction was significantly more accurate in dMRI (0.65 ± 0.38 mm) compared to IR (2.71 ± 1.91 mm), and CBCT (1.98 ± 1.97 mm), p-values ≤ 0.0001 respectively ≤ 0.01., Conclusions: Osseous defects around zirconia implants can be reliably measured in IR/CBCT/dMRI in the mesiodistal directions. In addition, CBCT and dMRI allow assessment of the buccolingual directions. dMRI provides a comparable accuracy in all directions, except for the mesiodistal defect depth, where it outperforms IR and CBCT., Competing Interests: Declaration of Competing Interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Objectives: To evaluate the fit of zirconia veneers made by either 3D printing or milling., Methods: A typodont maxillary central incisor was prepared for a 0.5-mm-thick veneer and was reproduced 36 times from resin. Restorations were designed with a 20-µm-wide marginal and a 60-µm-wide internal cement gap, and were made from 3D-printed zirconia (LithaCon 3Y 210, Lithoz, n = 24) and milled zirconia (Cercon ht, DentsplySirona, n = 12). For milled zirconia, a drill compensation was needed to give the milling bur access to the intaglio surface. The restorations were cemented, cross-sectioned, and the cement gap size was analyzed by two raters. Inter-rater reliability was studied at 12 3D-printed veneers (intraclass correlation coefficient, ICC, mixed model, absolute agreement). Twelve remaining 3D-printed restorations were compared with 12 milled restorations regarding fit at three locations: marginally, labially, and at the incisal edge (Mann-Whitney U-tests, α<0.05)., Results: Inter-rater reliability was excellent, with an ICC single-measure coefficient of 0.944 (95%-confidence interval: [0.907; 0.966]). Gap sizes (mean ± SD / maximum) were 55 ± 9 / 143 µm at the margins, 68 ± 14 / 130 µm labially, and 78 ± 19 / 176 µm at the incisor edge for 3D-printed veneers. For milled veneers, gap sizes were 44 ± 11 / 141 µm at the margins, 85 ± 19 / 171 µm labially, and 391 ± 26 / 477 µm at the incisor edge. At the margins, the milled veneers outperformed the 3D-printed restorations (p = 0.011). The cement gap at the incisor edge was significantly smaller after 3D printing (p < 0.001)., Conclusions: 3D-printed zirconia restorations showed clinically acceptable mean marginal gaps below 100 µm. Because drill compensation could be omitted with 3D printing, the fit at the sharp incisal edge was significantly tighter than with milling., Clinical Significance: The fit of 3D-printed ceramic anterior restorations meets clinical standards. In addition, 3D printing is associated with a greater geometrical freedom than milling. With regard to fit this feature allows tighter adaptation even after minimally invasive preparation., Competing Interests: Declaration of Competing Interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: This randomized clinical trial was conducted to assess whether sleep bruxism (SB) is associated with an increased rate of technical complications (ceramic defects) in lithium disilicate (LiDi) or zirconia (Z) molar single crowns (SCs). Methods: Adult patients were classified as affected or unaffected by SB based on structured questionnaires, clinical signs, and overnight portable electromyography (BruxOff) and block randomized into four groups according to SB status and crown material (LiDi or Z): LiDi-SB (n = 29), LiDi-no SB (n = 24), Z-SB (n = 23), and Z-no SB (n = 27). Differences in technical complications (main outcome) and survival and success rates (secondary outcomes) one year after crown cementation were assessed using Fisher’s exact test with significance level α = 0.05. Results: No technical complications occurred. Restoration survival rates were 100% in the LiDi-SB and LiDi-no SB groups, 95.7% in the Z-SB group, and 96.3% in the Z-no SB group (p > 0.999). Success rates were 96.6% in the LiDi-SB group, 95.8% in the LiDi-no SB group (p > 0.999), 91.3% in the Z-SB group, and 96.3% in the Z-no SB group (p ≥ 0.588). Conclusions: With a limited observation time and sample size, no effect of SB on technical complication, survival, and success rates of molar LiDi and Z SCs was detected.

Objectives: To investigate whether artificial CAD/CAM processed (computer-aided design/manufacturing) teeth could be a feasible option for the production of dental in vitro models for biomechanical testing., Material and Methods: Disks (n = 10 per group) made from two different CAD/CAM-materials, one fiber-reinforced composite (FRC; Trinia, Bicon) and one polymethylmethacrylate-based resin (PMMA; Telio CAD, Ivoclar Vivadent), as well as bovine teeth (n = 10), were tested for their shear bond strength (SBS) and scored according to the adhesive remnant index (ARI). In addition, CAD/CAM-manufactured lower incisor teeth were tested for their ultimate load (F u )., Results: With regard to SBS, both PMMA (17.4 ± 2.2 MPa) and FRC (18.0 ± 2.4 MPa) disks showed no significant difference (p = 0.968) compared to bovine disks (18.0 ± 5.4 MPa). However, the samples differed with regard to their failure mode (PMMA: ARI 4, delamination failure; FRC: ARI 0 and bovine: ARI 1.6, both adhesive failure). With regard to F u , FRC-based teeth could withstand significantly higher loads (708 ± 126 N) than PMMA-based teeth (345 ± 109 N) (p < 0.01)., Conclusion: Unlike PMMA-based teeth, teeth made from FRC showed sufficiently high fracture resistance and comparable SBS. Thus, FRC teeth could be a promising alternative for the production of dental in vitro models for orthodontic testing., Clinical Relevance: CAD/CAM-processed teeth made from FRC enable the use of standardized geometry and constant material properties. Using FRC teeth in dental in vitro studies has therefore the potential to identify differences between various treatment options with rather small sample sizes, while remaining close to the clinical situation., (© 2022. The Author(s).)

To investigate the predictability and the outcome of surface modification techniques, including anodization. Four surface modification techniques were evaluated in this in-vitro study: sandblasting (S), polishing+anodizing (PA), sandblasting+anodizing (SA), polishing+etching+ anodizing (PEA). Color coordinates L*, a* and b* were collected using a spectroradiometer. Color differences between all groups were quantified by use of ΔE 00 . A possible influence of group membership was evaluated using 1-way ANOVA. Pair-wise inter-group comparisons were performed using post-hoc Tukey tests. PA specimens were the brightest and showed a pronounced yellowish and reddish hue. S and SA groups were significantly darker and predictability of outcome was higher compared to another groups. The most predictable surface treatment method is sandblasting. Anodizing techniques come along with the brightest and most chromatic color impression of the titanium.

Statement of Problem: Monolithic zirconia restorations have become popular because of their excellent mechanical properties and acceptable esthetics. While the biomechanical properties of zirconia have been investigated, research into their esthetic properties is sparse. Zirconia can be colored by infiltration before sintering, although how occlusal adjustment can affect restoration color is unclear., Purpose: The purpose of this in vitro study was to analyze the color of differently characterized monolithic white and precolored zirconia specimens after standardized grinding., Material and Methods: White and precolored monolithic zirconia plates (Cercon ht) (n=36) were stained by infiltration with target colors Vita A2, A3.5, and A4. In a standardized experimental arrangement, all plates were ground in 9 steps, and the color was measured with a spectroradiometer at each step. Color differences (ΔE 00 ) were analyzed by using regression analysis, the Kruskal-Wallis test, and the inverse prediction with confidence intervals (α=.05)., Results: Mechanical material removal had a significant effect on the color stability (P<.05) of both white and precolored monolithic zirconia. For each grinding step and each target color, the precolored groups had a significantly lower ΔE 00 mean than the white groups (P<.05), except at the 20-μm step for groups W-A4 and P-A4 (P>.05). For target color A2, the difference was significant with P<.001 at all 9 grinding steps. For target color A3.5, the difference was significant with P=.003 at grinding level 20 μm, and P<.001 for all other grinding steps. For target color A4, the difference was not significant with P=.603 at grinding level 20 μm, whereas the difference was significant with P=.007 at grinding level 50 μm, and with P<.001 for all other grinding steps., Conclusions: Precolored zirconia had less color change after grinding than white zirconia. This study established grinding depths for white and precolored zirconia corresponding to color perceptibility and acceptability thresholds., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objectives: This in vitro study compared the dimensional accuracy of conventional impressions (CI) with that of digital impressions (DI) in a partially edentulous maxilla. DIs were made by two intraoral scanners, Omnicam (OC) and Primescan (PS)., Materials and Methods: CI and both intraoral scanners were used to take 30 impressions of two identical reference models. CIs were poured with type 4 gypsum and the saw-cut models were digitized. The reference models simulated a maxilla with six prepared teeth that accommodated a cross-arch fixed partial denture. Center points of five precision balls and center points at the margin level of each prepared tooth were used to detect changes in dimensions and tooth axis between the reference model and the scans., Results: For DI, the largest deviations (176 µm for OC and 122 µm for PS) occurred over the cross-arch. For CI, the largest deviation (118 µm) occurred over the anterior segment. For shorter distances up to a quadrant, DI was superior to CI. For longer scan distances, DI was comparable (2 sextant and anterior segment) or inferior (cross-arch) to CI. Vertical and tooth axis deviations were significantly smaller for CI than for DI (p < 0.001)., Conclusions: The impression method affected the impression accuracy of a partially edentulous maxilla with prepared teeth. DI is recommended for scans up to a quadrant. Larger scan volumes are not yet suitable for fabricating a fixed partial denture because of the high scatter of accuracy values., Clinical Relevance: In contrast to conventional impressions, digital impressions lead to comparable or better results concerning scans up to a quadrant. Consequently, for larger scan volumes, several smaller scans should be performed or, if restoration-related not possible, it is recommended to take conventional impressions., (© 2022. The Author(s).)

Purpose: This in-vitro study aimed to compare the accuracy of complete arch scans (CAS) of a fully dentate (FD) and a partially edentulous (PE) maxillary model. Three intraoral scanning systems were used: Omnicam AC (OC), TRIOS 4 (TR), and Primescan (PS)., Methods: Each intraoral scanner was used to take 30 scans each of two clinical scenarios (FD and PE) simulated by a reference model. The PE model simulated a maxilla with six prepared teeth to accommodate a jaw-spanning fixed partial denture (FPD). The missing teeth were then added to create an FD model. Five ceramic precision balls (ball centers P 1 -P 5 ) mounted on metal pins were welded to the metal base on the buccal side of the dental arch. These were later used to determine dimensional (given by each 2 ball centers) and angular changes (given by each 3 or 4 ball centers) between the reference model (digitized with high precision before the tests) and the intraoral scans. Data were statistically analyzed using a type II ANOVA., Results: The maximum mean absolute distance deviations were as follows. OC: 147 µm (FD) and 139 µm (PE). TR: 133 µm (FD) and 136 µm (PE). PS: 87 µm (FD) and 80 µm (PE). The scanning system used had a significant effect on distance deviations (p < 0.027) and CAS scanning time (p < 0.001). Dental status had no clear effect on distance deviations but did significantly affect angular changes (p < 0.001) and scanning time (p < 0.001)., Conclusion: The manufacture of jaw-spanning FPDs based on a CAS cannot yet be recommended.

Background: Current evidence about long-term survival of all-ceramic implant-supported cantilever fixed dental prostheses (cFDP) is limited., Purpose: To evaluate the survival and complication rates of all-ceramic and metal-ceramic implant-supported cFDPs located in anterior and posterior sites, under consideration of risk factors., Methods of Study: The retrospective analysis compared an experimental group (75 implant-supported cFDPs among 48 patients [mean age 60.47 ± 9.25 years; 21 men]; mean observation period 3.56 years) with a control group (300 implant-supported non-cantilever FDPs [ncFDP] among 241 patients [mean age 62.85 ± 10.72 years; 109 men]; mean observation period 7.25 years). Kaplan-Meier estimates were used to describe the long-term survival and success of both groups. Log-rank tests were used for group comparisons. Mixed-effects Cox proportional hazards regression models were used to examine the effects of restoration- and site-specific risk factors. A random intercept was included in the models to take multiple FDPs per patient into account., Results: Five-year cumulative survival until loss of restoration was 97.1% (95% confidence interval [CI] 0.93-1.00) for cFDPs and 97.0% (95% CI 0.95-0.99) for ncFDPs. Ten-year survival was 93.7% (95% CI 0.86-1.00) for cFDPs and 92.8% (95% CI 0.87-0.98) for ncFDPs, no difference between the survival curves of these groups was observed. Success differed between cFDPs and ncFDPs (p Log  = 0.002), zirconia and metal frameworks (p Log  < 0.001), and provisional and definitive cements (p Log  = 0.025). The effects of the variables "framework material" and "attachment method" were confirmed in a mixed-effects Cox regression model. Loss of retention was the predominant complication for both cFDPs and ncFDPs and usually affected provisionally cemented FDPs., Conclusions: cFDPs do not differ from ncFDPs with regard to long-term failure, whereas additional complications were higher for cFDPs. Fewer complications were observed for zirconia frameworks without occlusal veneers and definitive cemented FDPs., Clinical Trial Registration: the trial has no registration number because it commenced before January 31, 2017., (© 2022 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Objectives: To test strength and reliability of 3D printed compared to milled zirconia., Methods: Cylindrical specimens were fabricated from milled (group G1; e.max ZirCAD LT) and from 3D printed (group G2; LithaCon 3Y 230) 3-mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP). While G1 and G2 were sintered in one step, a further series (G3) of 3D printed 3Y-TZP was sintered in two steps including intermediate color infiltration. In each group, two different conditioning strategies were applied (n ≥ 20 samples/subgroup): (1) final polishing with #1200 diamond discs according to ISO 6872, and (2) final polishing with #220 diamond discs resulting in imperfectly polished surfaces. All samples were tested to fracture with a universal testing device (cross-head speed: 1 mm/min). Characteristic strengths and Weibull moduli were calculated. Effects were analyzed by means of either ANOVA (homocedastic data) or Welch ANOVA (heterocedastic data)., Results: For samples conditioned according to ISO 6872, mean flexural strengths were 1462 ± 105 MPa (G1), 1369 ± 280 MPa (G2), and 1197 ± 317 MPa (G3). For the imperfectly polished subgroups, strength values were 1461 ± 121 MPa (G1), 1349 ± 332 MPa (G2), and 1271 ± 272 MPa (G3). Although all groups showed high mean strength values, the reliability of milled zirconia (Weibull moduli 14 < m <16) outperformed that of the 3D-printed material (3 < m <6)., Significance: Even after color infiltration in a partially sintered state, the tested 3D printed zirconia exceeded the ISO flexural strength criteria for all types of fixed ceramic restorations by far (800 MPa for class 6, ISO 6872), indicating its high potential for clinical use. Further optimization of the internal material structure after sintering might improve the reliability of 3D printed zirconia which is currently inferior to that of milled zirconia., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interest, (Copyright © 2022 Elsevier Inc. All rights reserved.)

Purpose: This study investigated the retentive force of conical crowns combining zirconia primary and fiber-reinforced composite (FRC) secondary crowns and their changes due to aging., Methods: Zirconia primary crowns were produced with a convergence angle of 3°. Thirty-two secondary crowns were milled from FRC and divided into two groups (n = 16/group) based on the polishing method of the secondary crown inner surfaces: diamond paste (Group 1) and silicone points (Group 2). After fitting the secondary crowns with different fitting forces (F), loosening forces (L) were determined. Tests were repeated after an occlusal stop (OS) was added to the secondary crown and artificial aging (10,000 insertion/removal cycles). Data were compared using the Wilcoxon and Mann-Whitney U tests., Results: Crowns without an OS showed L/F ratios of 0.4586 (Group 1) and 0.4104 (Group 2). With an OS, maximum retention was not significantly affected by the polishing method and could be limited to L max  = 19.31±7.77 N (Group 1) and L max  = 16.12±5.92 N (Group 2)., Conclusions: These findings suggest that the combination of conical zirconia primary and FRC secondary crowns can obtain acceptable retentive forces that are not affected by aging if the inner surfaces are polished with diamond paste. OS generation could limit maximum retention, but should be adjusted if the target value of 10 N is not to be exceeded. With a change of the convergence angle to 4°, L/F values for crowns without an OS would be close to 1/3, which is considered ideal for conical crowns., Clinical Significance: The combination of zirconia primary crowns and FRC secondary crowns was found feasible to ensure the required retention for clinical use over a long time span. Furthermore, it offers an alternative to metal-based restorations while ensuring high levels of biocompatibility and esthetics., (Copyright © 2022. Published by Elsevier Ltd.)

Objectives: The purpose of this study was to analyze the color infiltration in monolithic zirconia after grinding, which plays an essential role in the color stability of restorations after occlusal adjustment., Methods: One hundred and eight white zirconia plates (36 Dentsply Sirona-Cercon high translucency [C], 36 Zirkonzahn-Prettau [P], 36 Zirkonzahn-Prettau anterior [Pa]) were stained by infiltration with target colors Vita A2, A3.5, and A4. In a standardized experimental setup, all plates were grinded in nine successive steps (from baseline to 500 μm), and color was measured with a spectroradiometer at each grinding step. Color differences ΔE 00 between initial color and after each grinding step were calculated. The data was analyzed using regression, Kruskal-Wallis test, inverse prediction, and simultaneous 95%-confidence intervals., Results: Grinding had a significant effect on color stability across all zirconia types and target colors (p < 0.001). At each cut level and target color, ΔE 00 means for groups C, P, and Pa were statistically different (p < 0.05). Among the three zirconia types, Pa had the lowest ΔE 00 mean score for cut levels 20-100 μm for A2 and between 50 and 300 μm for A3.5 and A4. For all other cut levels, differences between Pa and P were not significant (α = 0.05). C had the largest mean ΔE 00 except for A4 until 100 μm, where it was second best., Conclusion: Zirconia type had a significant effect on the color infiltration depth across all target colors. Pa showed the best color stability until 150 μm material reduction, whereas C presented significantly less color stability than the other two zirconia materials., Clinical Significance: Color stability is important for minimizing the risk of restoration failure due to unacceptable color changes after grinding. Pa is less susceptible to color change and has an additional buffer of 60 μm until exceeding the color acceptability threshold. When higher flexural strength is needed, P is to be preferred., (© 2022 The Authors. Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Background: Reliable and suitable bruxism assessment would be desirable, but available studies presented heterogeneous results., Objective: To determine the agreement of patient self-reports and clinical signs of sleep bruxism (SB) with electromyographic/electrocardiographic data., Methods: Two hundred individuals from a German dental clinic population (120 women and 80 men) participated in the study. Participants completed different SB questionnaires, had a clinical examination to evaluate bruxism signs and used the Bruxoff® device to record electromyographic/electrocardiographic data for five nights. To investigate interrater reliability for clinical diagnosis of bruxism, 126 of the 200 participants were assessed for clinical signs of bruxism by two independent uncalibrated examiners. Statistical evaluation included calculation of sensitivity, specificity and accuracy and of Cohen's kappa., Results: Based on the Bruxoff® data, 106 participants were identified as bruxers and 94 as non-bruxers. The 106 bruxers were further classified into 47 moderate and 59 intense bruxers. The highest accuracy and sensitivity values were recorded for the overall score for clinical bruxism signs (accuracy: 72.0% and sensitivity: 70.8%). The best specificity (96.8%) was seen for the question regarding tooth grinding in the last two weeks reported by others, but concurrent sensitivity was very low (3.8%). Analysis of interrater reliability revealed a substantial agreement (Cohen's kappa of 0.6)., Conclusion: The study results indicate that self-report questionnaires and clinical signs have moderate sensitivity, specificity and accuracy for diagnosing bruxism comparing with an ambulatory device for current SB (Bruxoff®). Regarding interrater reliability for clinical signs of SB, substantial agreement was found between the two examiners., Clinical Trial No: NCT03039985., (© 2022 The Authors. Journal of Oral Rehabilitation published by John Wiley & Sons Ltd.)

Purpose: Fabrication inaccuracies can compromise the fit of large-span monolithic zirconia restorations. Sintering distortion is a particular problem. This study aimed to assess the fit of full-arch restorations made from monolithic zirconia for different abutment configurations., Methods: To quantify fit inaccuracies created during the fabrication of experimental large-span restorations, an in-vitro model with eight abutment teeth was equipped with strain gauges. Ten 14-unit restorations were made from monolithic zirconia and seated on the model in turn. For each of the ten restorations, measurements were taken for three different abutment configurations-polygonal, quadrangular, and unilaterally shortened. Strains exerted during seating were recorded in the anterior-posterior and buccal-palatal directions, and the resulting horizontal forces (rhF) were calculated along with the respective abutment deflection (ad). Data were analyzed using Kruskal-Wallis tests at a significance level of 0.05., Results: All restorations could be seated on the multi-abutment model. The restorations exhibited fabrication misfits, tending to be too wide. Mean rhF/ad were largest for the quadrangular configuration (16.8±2.9 N/0.065 mm) and smallest for the polygonal configuration (13.6±4.5 N/0.053 mm). The largest rhF/ad were measured on abutments of the unilaterally shortened configuration, with a maximum deflection of 0.126 mm. For two of three configurations, rhF/ad were significantly larger for the distal abutments than for the other abutments., Conclusion: Even if milling and sintering procedures are optimum, misfit-induced horizontal forces cannot be avoided. Because of the natural tooth mobility, however, the fit of full-arch restorations made from monolithic zirconia might be clinically acceptable.

Purpose: The purpose of this study was to prospectively evaluate the medium-term clinical performance and esthetics of monolithic and partially (i.e., facially) veneered zirconia single crowns (MZ-SC and PZ-SC, respectively)., Methods: Between September 2011 and June 2013, 68 participants received 90 MZ-SC and 72 PZ-SC. Clinical study documentation was performed at crown cementation (baseline), at 6-month follow-up, and then yearly thereafter using standardized report forms. Three participants with four MZ-SC dropped out during clinical follow-up. Thus, 65 participants (n = 31, 47.7% men) fitted with 158 restorations (86 MZ-SC, 72 PZ-SC) were evaluated. The mean observation period of the restorations was 5.8 ±2.5 years; 6.3 ±2.2 for MZ-SC and 5.2 ±2.6 for PZ-SC., Results: The 5-year rate of complication-free survival (success) was 87.0% for MZ-SC and 95.8% for PZ-SC (log-rank test, p = 0.026). The 5-year failure-free survival rate was 93.1% for MZ-SC and 96.2% for PZ-SC (log-rank test, p = 0.111), and the 5-year ceramic fracture-free survival rate was 100% for MZ-SC and 98.6% for PZ-SC (log-rank test, p = 0.274). Crowns of both designs were awarded excellent scores for esthetics by participants and dentists., Conclusion: Monolithic and partially veneered zirconia crowns can be used clinically with high medium-term survival and success and uncompromised esthetic results.

Purpose: This study investigated changes in the retentive force of telescopic crowns fabricated by combining a zirconia primary crown and a fiber-reinforced composite (FRC) secondary crown., Methods: Primary zirconia crowns were produced with a nominal convergence angle of 0°. Forty-eight secondary crowns were milled from FRC and divided into three study groups (n=16/group) based on milling parameters and post-milling adjustment. The offset parameter used for the final milling step of the inner crown surface was adjusted for a tight initial fit in Group 1 (milling offset: +10 µm, i.e., 2 × 10 µm = 20 µm lower inner diameter compared with the CAD file of the crown) and for improved initial fit (milling offset: -10 µm, i.e., an enlargement of the inner crown diameter by 2 × 20 µm = 40 µm in relation to Group 1) in Groups 2 and 3. The inner surfaces of the secondary crowns were polished with diamond paste in Groups 1 and 2, and silicon points were used for Group 3. The retentive force was measured using a universal testing device. The secondary crown was placed on the primary crown, with the final fitting force set to a load of 100 N. This test was conducted before and after aging (10,000 insertion/removal cycles) under dry and wet conditions. A generalized linear model was used to estimate the differences in the retentive force to elucidate the effects of the milling parameters and polishing methods., Results: We realized an initial retentive force of approximately 10 N. In Groups 2 and 3, the difference was statistically significant between the dry and wet conditions before aging (P < 0.05). There was no significant difference between the dry and wet conditions after aging in any of the groups (P > 0.05)., Conclusion: An adequate initial retentive force can be achieved with telescopic crowns combining zirconia and FRC.

Purpose: High-definition cone-beam computed tomography (HD-CBCT) offers superior image quality at the cost of higher radiation dose compared to low-dose CBCT (LD-CBCT). The aim of this study was to investigate whether peri-implant bone lesions can be accurately quantified using LD-CBCT, even when including the influence of surrounding tissues., Methods: Twelve titanium implants restored with all-ceramic crowns were placed in bovine bone, and peri-implant lesions were prepared. Radiographic imaging was performed using IR (intraoral radiography), HD-CBCT and LD-CBCT. To simulate the in-vivo situation, the samples were placed inside a dry human mandible, and a second LD-CBCT imaging was performed (LD-CBCT*). The datasets were presented to four observers in random order. Maximum lesion depth and width were measured in a standardized mesiodistal slice in IR, HD-CBCT, LD-CBCT, and LD-CBCT*. Mean lesion depth and width measurements for each sample in HD-CBCT served as reference., Results: Interrater agreement was slight for depth and excellent for width in HD-CBCT and both LD modes. For all observers, measurement deviations from HD-CBCT were below 0.3 mm in the LD protocols (LD-CBCT depth: 0.22 ± 0.17 mm, width: 0.22 ± 0.13 mm; LD-CBCT* depth: 0.24 ± 0.23 mm, width: 0.25 ± 0.21 mm) and at 0.4 mm in IR., Conclusion: Absolute differences between LD-CBCT and HD-CBCT are small, although surrounding tissues decrease LD-CBCT image quality. Within the limitations of an in-vitro trial, LD-CBCT may become an adequate imaging modality for monitoring peri-implant lesions at a substantially decreased radiation dose.

Objectives: To determine sleep bruxism (SB) behavior during five consecutive nights and to identify correlations between SB episodes per hour (SB index) and sleep-time masseter-muscle activity (sMMA)., Material and Methods: Thirty-one participants were included in the study. Of these, 10 were classified as sleep bruxers (group SB-1) and nine as non-sleep bruxers (group non-SB). The bruxism status of these 19 patients was identified by means of questionnaires, an assessment of clinical symptoms, and electromyographic/electrocardiographic data (Bruxoff® device). The remaining 12 participants were also identified as bruxers, but based exclusively on data from the Bruxoff device (group SB-2). Data analysis included descriptive statistics and Spearman's correlation to assess the relationship between the SB index and sMMA., Results: Participants in group SB-1 showed an overall mean SB index of 3.1 ± 1.6 and a mean total sMMA per night of 62.9 ± 38.3. Participants in group SB-2 had an overall mean SB index of 2.7 ± 1.5 and a mean total sMMA of 56.0 ± 29.3. In the non-SB group, participants showed an overall mean SB index of 0.8 ± 0.5 and a mean total sMMA of 56.8 ± 30.3. Spearman's correlation yielded values of - 0.27 to 0.71 for the correlation between sMMA and SB index., Conclusions: The data revealed variable SB activity and the absence of a reliable correlation between sMMA and the SB index., Clinical Relevance: The high variation in SB activity and lack of correlation between sMMA and the SB index should be considered when diagnosing SB., Trial Registration: Clinical Trials [NIH], clinical trial no. NCT03039985., (© 2021. The Author(s).)

Abstract: Purpose of this study was to examine the discriminative properties of the 3-item Pain (P), Enjoyment (E), and General activity (G) (PEG) questionnaire for grading impact of nondental orofacial pain. Two hundred eighty-six consecutive patients with orofacial pain of nondental origin filled out the PEG questionnaire and Graded Chronic Pain Scale (GCPS, version 2). Correlation between the PEG and GCPS scores, internal consistency of the PEG, and differences between groups were examined statistically (level of significance: P ≤ 0.05). The mean (±SD) age of the 213 patients (158 female) who were included in the analysis was 43.1 (±16.7) years. Of the sample, 48.8% (n = 104) had some degree of orofacial pain-related disability (mean overall characteristic pain intensity: 51.2 ± 23.2, average overall PEG score: 4.3 ± 2.7, and average PHQ-9 score: 8.2 ± 6.5). No significant differences were found between the sexes for any score. The number of disability points (GCPS) and overall PEG score showed a strong and positive correlation (Spearman ρ = 0.77, P < 0.001). The internal consistency of the PEG questionnaire was high (Cronbach α = 0.86). Assuming 3 different levels of orofacial pain-related disability (mild, moderate, and severe), we obtained overall accuracy of 69.01%, with high specificity for mild and severe cases. The 3 PEG groups (mild, moderate, or severe) differed from each other significantly regarding their clinical grading according to the GCPS (Kruskal-Wallis, P < 0.001). Analysis of the receiver operating characteristic curve showed that a single cutoff value of 3.8 points in the PEG score yields adequate validity (sensitivity = 0.91 and specificity = 0.78). The proposed 2 cutoff points (upper = 7 and lower = 4) yield low sensitivity for the upper threshold. The 3-item PEG questionnaire is suitable for grading impact of nondental orofacial pain., (Copyright © 2021 International Association for the Study of Pain.)

Objective: To evaluate the repeatability, interexaminer, and interdevice reliability of two clinically applicable spectrophotometers under laboratory and clinical conditions., Material and Methods: For the in vitro part of the study, measurements were performed by the use of Vita Easyshade Advance 4.0 (ES-A) and the Easyshade V (ES-V) at identical positions on different shade tabs (3D-Master; Vita Zahnfabrik, Bad Säckingen, Germany). To test repeatability, one shade tab was measured 50 times by one operator. To determine interrater and interdevice agreement, two operators used both devices to perform 10 measurements on five different shade tabs. Clinical interdevice and interexaminer reliability was checked with a positioning jig used (15 participants). Measurement accuracy of both devices was evaluated for the recommended color of shade tabs., Results: Repeatability of results from both Easyshades was excellent for all color components (maximum deviation between measurements was ≤0.1 units). Interrater agreement was also perfect (intraclass correlation, ICC = 1.000). Interdevice agreement was lower, but still good (ICC ≥ 0.834). In the clinical environment, interrater and interdevice agreements were similar (ICC > 0.964 and ICC > 0.873). Accuracy was satisfactory for both devices, with both observers in full agreement for nearly 80% of ratings., Conclusions: Both Easyshades produced reliable and accurate measurements and can therefore be recommended for clinical determination of tooth color., Clinical Significance: The outcome of this study might help clinicians estimate the performance of a new digital shade determination device., (© 2018 Wiley Periodicals Inc.)

Background: The dementia syndrome compromises effective communication and may thus lead to social isolation, psychological distress and decreased quality of life. It is therefore of importance to maintain communication capacity in dementia as long as possible., Material and Methods: A total of 24 professional caregivers from 8 nursing homes were assigned to train 254 of their respective colleagues using the train-the-trainer program MultiTANDEMplus. As in the 6 control nursing homes, severity of dementia, depressive symptoms and communication capacity were assessed in a total of 358 residents at baseline and 21 months later. Overall, 189 residents completed the study., Results: Communication capacity declined in control home residents but remained stable in the intervention group although dementia severity increased in both groups. The intervention group exhibited significantly fewer depressive symptoms after the intervention than the control group., Conclusion: A standardized training of communication skills for professional caregivers can stabilize communication capacity and reduce depressive symptoms in nursing home residents. These effects are likely sustainable and could be demonstrated 21 months postintervention., (© 2021. Springer Medizin Verlag GmbH, ein Teil von Springer Nature.)

Objectives: To compare the failure rates for three different adhesively retained core build-up composites up to the incorporation of a permanent fixed dental prosthesis (FDP), and to identify potential failure risk factors., Material and Methods: A randomized controlled trial of 300 participants in need of a core build-up to restore a vital abutment tooth before prosthetic treatment was conducted. Participants were assigned by stratified block randomization to one of three study groups: Rebilda DC (RDC), Clearfil DC Core (CDC), or Multicore Flow (MF). Test teeth were prepared by use of the respective manufacturer's adhesive system. The total-etch technique was used for RDC and MF, and the self-etch technique for CDC. Participants were treated by dentists (n = 150) or dental students (n = 150). Failure rates of core build-ups before incorporation of FDPs were investigated using univariate and multiple logistic regression., Results: The overall failure rate was 8% (n = 23). Rate differences between the three investigated groups did not reach statistical significance (p > 0.05). The mean time between placement of core build-ups and placement of fixed dental prostheses was 12.2 (SD: 14.2) weeks. Conversely, larger cavities (> 3 surfaces) and treatment by dental students were independently associated with an increased failure risk (p < 0.05)., Conclusions: The main risk factors for early failure seem to be the size of the core build-up and clinical experience of the operator, whereas failure rates of core build-up materials combined with a self-etch approach seem to be similar to the rates of materials combined with the total-etch technique., Clinical Significance: This research article should give clinicians an impression of the short-term performance of different adhesively retained core build-ups using different adhesive techniques/materials. Moreover, predominant influencing factors for the success or failure should be pictured., (© 2021. The Author(s).)

Objectives: To investigate the long-term performance, over a period of up to 11 years, of tooth-implant-supported and solely implant-supported double-crown-retained overdentures (DCRDs) for complete restoration of the jaw., Materials and Methods: Between 2002 and 2015, patients were consecutively enrolled in the study at Heidelberg University Hospital's Department of Prosthodontics. Scheduled and unscheduled visits were both documented on standardized forms. Kaplan-Meier curves were used to evaluate survival and success of the DCRDs. Mixed effects Cox regression was used to identify the potential effects of age, sex, jaw, location of implants, and the number of abutment teeth on the success of the DCRDs., Results: One hundred and thirty-nine DCRDs were placed in 126 participants (mean age: 65.6 ± 9.1 years; 76 [60.3%] men). The mean follow-up period was 4.2 years. Fifty-three (38%) DCRDs were solely implant-supported (213 implants) and 86 (62%) were tooth-implant-supported (239 teeth and 199 implants). Cumulative five-year survival was 96.2% in the implant-supported group and 97.7% in the tooth-implant-supported group. Simultaneous consideration of failures and severe complications revealed cumulative five-year success of 88.2% for implant-supported DCRDs and 81.9% for tooth-implant-supported DCRDs, with no significant difference between the two types of restoration. Cox regression analysis revealed a greater risk of major complications (hazard ratio: 4.87, p = .04) for maxillary DCRDs than for mandibular DCRDs., Conclusions: Although the study design has limitations, the results show that tooth-implant-supported and solely implant-supported DCRDs are both recommendable treatment options. After a mean follow-up of 4.2 years, survival and success were high. However, minor complications were common and required much aftercare., Clinical Trial Registration: This study started in 2005 and was approved by the local review board of the University of Heidelberg. In 2005, clinical trial registration was not yet common. For this reason, the study was not registered., (© 2021 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Objectives: Computer-aided design and manufacturing (CAD/CAM) has been successfully used to replace conventional steps in the fabrication of double crowns, creating hybrid-workflows that might facilitate the wider application of these restorations in the future. However, in-vivo data are still lacking., Methods: A prospective clinical trial was designed in which 20 patients (median age = 69 years; n women = 10) with 73 abutment teeth who needed a double-crown-retained removable partial denture (RPD) were consecutively recruited. While most of the work steps were done conventionally, gypsum models were digitized with a laboratory scanner to allow CAD/CAM fabrication of primary crowns and secondary structures. DentalDesigner software (3Shape) was used in combination with milling unit PrograMillPM7 and Co-Cr- blanks (Ivoclar-vivadent). Connectors were milled from wax, transferred to Co-Cr using lost-wax technique and bonded to the secondary crowns. Clinical follow-ups were scheduled 6 and 12 months after prosthesis insertion. Outcome parameters were complication-free survival of RPDs and abutment teeth after one year., Results: After 12 months, complication-free survival was 74% and 91% for the RPDs and abutment teeth, respectively. Complications comprised decementations (n = 5), abutment tooth fractures (n = 2), fracture of denture teeth (n = 1), and loss of abutment teeth (n = 1). These complications were easily manageable, resulting in 1-year survival of 100% for CAD/CAM RPDs., Conclusions: First data on short-term complication rates of CAD/CAM double-crown-retained RPDs appear promising. To gather further evidence, prospective clinical trials over a longer follow-up time and with larger patient groups are required., Clinical Significance: Hybrid CAD/CAM double-crown retained RPDs showed a successful clinical application after one year of follow-up. Further research is needed to evaluate their performance in comparison to conventional manufacturing methods., (Copyright © 2021. Published by Elsevier Ltd.)

This study aimed to investigate the geometric reproducibility of three-dimensional (3D) implant planning based on magnetic resonance imaging (MRI) and cone-beam computed tomography (CBCT). Four raters used a backward-planning approach based on CBCT imaging and standard software to position 41 implants in 27 patients. Implant planning was repeated, and the first and second plans were analyzed for geometric differences regarding implant tip, entry-level, and axis. The procedure was then repeated for MRI data of the same patients. Thus, 656 implant plans were available for analysis of intra-rater reproducibility. For both imaging modalities, the second-round 3D implant plans were re-evaluated regarding inter-rater reproducibility. Differences between the modalities were analyzed using paired t-tests. Intra- and inter-rater reproducibility were higher for CBCT than for MRI. Regarding intra-rater deviations, mean values for MRI were 1.7 ± 1.1 mm/1.5 ± 1.1 mm/5.5 ± 4.2° at implant tip/entry-level/axis. For CBCT, corresponding values were 1.3 ± 0.8 mm/1 ± 0.6 mm/4.5 ± 3.1°. Inter-rater comparisons revealed mean values of 2.2 ± 1.3 mm/1.7 ± 1 mm/7.5 ± 4.9° for MRI, and 1.7 ± 1 mm/1.2 ± 0.7 mm/6 ± 3.7° for CBCT. CBCT-based implant planning was more reproducible than MRI. Nevertheless, more research is needed to increase planning reproducibility-for both modalities-thereby standardizing 3D implant planning.

Objectives: To measure in vivo 3D accuracy of backward-planned partially guided implant surgery (PGIS) based on dental magnetic resonance imaging (dMRI)., Material and Methods: Thirty-four patients underwent dMRI examinations. Tooth-supported templates were backward planned using standard dental software, 3D-printed, and placed intraorally during a cone beam computed tomography (CBCT) scan. Treatment plans were verified for surgical viability in CBCT, and implants were placed with guiding of the pilot drill. High-precision impressions were taken after healing. The 3D accuracy of 41 implants was evaluated by comparing the virtually planned and definitive implant positions with respect to implant entry point, apex, and axis. Deviations from the dMRI-based implant plans were compared with the maximum deviations calculated for a typical single implant., Results: Twenty-eight implants were placed as planned in dMRI. Evaluation of 3D accuracy revealed mean deviations (99% confidence intervals) of 1.7 ± 0.9mm (1.2-2.1mm) / 2.3 ± 1.1mm (1.8-2.9 mm) / 7.1 ± 4.8° (4.6-9.6°) for entry point / apex / axis. The maximum deviations calculated for the typical single implant surpassed the upper bounds of the 99% CIs for the apex and axis, but not for the entry point. In the 13 other implants, dMRI-based implant plans were optimized after CBCT. Here, deviations between the initial dMRI plan and definitive implant position were only in part higher than in the unaltered group (1.9 ± 1.7 mm [0.5-3.4 mm] / 2.5 ± 1.5 mm [1.2-3.8 mm] / 6.8 ± 3.8° [3.6-10.1°] for entry point / apex / axis)., Conclusions: The 3D accuracy of dMRI-based PGIS was lower than that previously reported for CBCT-based PGIS. Nonetheless, the values seem promising to facilitate backward planning without ionizing radiation., (© 2021 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Objectives: To investigate the predictability and image quality of low-dose cone-beam computed tomography (LD-CBCT) in computer-guided implantology., Methods: Pig cadaver mandibles were imaged using high-definition CBCT (HD-CBCT) and LD-CBCT (HD-CBCT: 85 kV, 6 mA, 14.2 s, 767 frames, 1184 mGycm 2 , voxel size 80 µm, effective dose 231 µSv; LD-CBCT: 85 kV, 10 mA, 2.1 s, 384 frames, 84 mGycm 2 , voxel size 160 µm, effective dose 16 µSv; Orthophos SL, Dentsply Sirona, Bensheim, Germany). Digital impressions were taken using intraoral scanning (IOS; Omnicam, Dentsply Sirona). Data of CBCT modalities and IOS were aligned. Forty-eight implants were planned virtually (24 implants per modality; Bone Level 4.1 × 10 mm; Straumann AG, Basel, Switzerland). Implants were inserted using templates by initial pilot drilling ("partially-guided implantation"). Implant positions were recorded using IOS. Geometric deviations between planned and definitive positions were assessed regarding implant apex, entry-point and angle. CBCT image quality was evaluated by raters twice on a four point scale. The results were exploratively compared (linear models, Mann-Whitney-U tests)., Results: Regarding implant apex, deviations were greater for LD-CBCT (mean 3.0±1.2 mm), as compared to HD-CBCT (mean 2.3±1.1 mm). For entry-point, no distinct difference was detected with a mean deviation of 1.4±0.9 mm in LD-CBCT, and 1.7±0.6 mm in HD-CBCT. Regarding angle, deviations were greater for LD-CBCT (mean 13.2±6.3°), as compared to HD-CBCT (mean 9.2±5.3°). The image quality of HD-CBCT provided to be better (mean 2.7±0.6) than that of LD-CBCT (mean 2.5±0.6)., Conclusions: Within the partially-guided approach, the results underline the potential of LD-CBCT alternatively to HD-CBCT for computer-guided implantology. Advantages of HD-CBCT need to be balanced against the higher radiation dose., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Statement of Problem: Fully digital dentistry is contingent on an accurate digital scan of the complete arch; however, the dimensional accuracy of different scanners for digitizing a complete arch is unclear., Purpose: The purpose of this in vitro study was to compare the accuracy of 2 intraoral scanners, TRIOS 3 (TR) and CEREC Omnicam (OC). Accuracy was assessed from changes to reference distances defined along the complete arch of a reference cast including 3 precision balls and 3 prepared teeth. The local accuracy (trueness and precision) of the scanned surface of each prepared tooth was also assessed., Material and Methods: Each intraoral scanner was used to scan a metal mandibular reference cast 20 times in a randomized sequence. The complete dental arch of a mandible in which the second left premolar was missing contained 2 prepared teeth, the first left premolar (LP) and the first left molar (LM) to accommodate a fixed partial denture (FPD) with complete crowns. The arch also contained an inlay preparation on the right second premolar (RP). Stainless-steel precision balls (ball centers P 1 , P 2 , and P 3 ), which were welded onto the left second molar (P 1 ), the incisal contact point of the central incisors (P 3 ), and the right first molar (P 2 ), were used to determine dimensional changes over the complete arch. Powder (CEREC Optispray) was applied to the reference cast to reduce reflections. Deviations between the reference cast (digitized with high precision before the tests) and the intraoral scans were calculated using Matlab R2015a and Geomagic Design X. To evaluate dimensional changes, the centers of the balls were determined, and their absolute changes in distance (ΔP 1 P 2 , ΔP 1 P 3 , and ΔP 2 P 3 ) were calculated. To calculate accuracy (trueness and precision) in relation to the prepared teeth, the mesh deviation between the intraoral scans and the superimposed reference teeth was determined. The data were statistically analyzed by using a nonparametric rank-based 2-way repeated-measures ANOVA, and differences in least square means for pairwise comparisons were calculated (α=.05)., Results: The following mean absolute changes in distance were determined: ΔP 1 P 2 , TR: 74.4 μm, OC: 119.6 μm; ΔP 1 P 3 , TR: 24.7 μm, OC: 17.2 μm; ΔP 2 P 3 , TR: 68.6 μm, OC: 41.2 μm. The scanner did not have a statistically significant effect (P=.118) for distance, and the different distances differed significantly from each other (P<.001). Both scanners provided results acceptable for the fabrication of inlays and short-span FPDs. A complete-crown scan was more accurate than an inlay scan (P<.001). Accuracy and precision were better for TR than for OC (P<.001)., Conclusions: With maximum discrepancies of 192.5 to 294.6 μm across the dental arch, complete-arch scans cannot yet be recommended for the fabrication of long-span FPDs., (Copyright © 2020 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objectives: To determine implant survival and success of four conventionally but initially asynchronously loaded implants in implant-supported overdentures for the edentulous maxilla, in participants with opposing mandibular two-implant overdentures., Material and Methods: Twenty-six participants received four implants in the region of the maxillary canines and molars. After healing, 24 of these participants (mean age: 68.3 years) were randomly allocated to one of two treatment groups, and the adapted overdenture was attached to two unsplinted cylindrical attachments. The other two matrixes remained unattached to the implants for 3 months. After this period, the other two implants were loaded for 3 months (cross-over design). Then, all four implants were loaded for another 3 months. Kaplan-Meier curves were used to evaluate survival and success of implants and dentures., Results: During the active prosthetic study phase, three participants lost one implant. Two participants lost three implants during the recall period. Implant survival after loading was 93.8% after a mean observation period of 3.1 years. Denture survival was 100%, but denture success was 95.8%, due to major prosthetic complications. Most participants preferred four implants to two., Conclusions: Within the limitations of the study, it can be concluded that maxillary implant overdentures on two or four implants are both recommendable treatment options. Two posterior implants are not superior to two anterior implants under overdentures retained by unsplinted cylindrical attachments. Implant and prosthetic complications and aftercare measures are common but are mostly easy to handle. However, 23 of the 24 participants preferred the 4-implant maxillary overdenture., (© 2021 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)