Search

We numerically and experimentally demonstrate the generation of Type II micro-combs in a Filter-Driven four wave mixing laser, showing that the generated Type II micro-combs are fully coherent.

8 págs.; 6 figs.; Open Access funded by Creative Commons Atribution Licence 4.0, Ultrafast laser processing applications need fast approaches to assess the nonlinear propagation of the laser beam in order to predict the optimal range of processing parameters in a wide variety of cases. We develop here a method based on the simple monitoring of the nonlinear beam shaping against numerical prediction. The numerical code solves the nonlinear Schrodinger equation with nonlinear absorption under simplified conditions by employing a state-of-the art computationally efficient approach. By comparing with experimental results we can rapidly estimate the nonlinear refractive index and nonlinear absorption coefficients of the material. The validity of this approach has been tested in a variety of experiments where nonlinearities play a key role, like spatial soliton shaping or fs-laser waveguide writing. The approach provides excellent results for propagated power densities for which free carrier generation effects can be neglected. Above such a threshold, the peculiarities of the nonlinear propagation of elliptical beams enable acquiring an instantaneous picture of the deposition of energy inside the material realistic enough to estimate the effective nonlinear refractive index and nonlinear absorption coefficients that can be used for predicting the spatial distribution of energy deposition inside the material and controlling the beam in the writing process., This work has been partly funded by MINECO TEC2011-22422 project. J. de H. acknowledges funding from the JAE CSIC Program (pre-doctoral fellowship co-funded by the European Social Fund). A.P. acknowledges support from the People Program (Marie Curie Actions) Incoming International Fellowship (CHRONOS) under REA grant agreement nu [327627].

Reading a mathematical problem can be often challenging for students. To be successful, they need to understand the words, transposing their meaning on an abstract level, to identify the relations stated in the problem and the task requested. Even if the meaning of the words is known, the case can be given that the student cannot grab the global meaning, nor inferring useful implications to solve the problem. This article offers an overview on reading comprehension issues linked to mathematical texts, and then proposes a set of common mistakes made by young readers, emerged in a first exploratory field experience carried out with grade 7 students. Given that learning activities were carried out on the Pythagorean Theorem, specific attention was devoted to the transposition of words into geometrical figures.

In this paper, we demonstrate a novel dual-pump approach to generate robust optical frequency comb with varying free spectral range (FSR) spacing in a CMOS-compatible high-Q micro-ring resonator (MRR). The frequency spacing of the comb can be tuned by an integer number FSR of the MRR freely in our dual-pump scheme. The dual pumps are self-oscillated in the laser cavity loop and their wavelengths can be tuned flexibly by programming the tunable filter embedded in the cavity. By tuning the pump wavelength, broadband OFC with the bandwidth of >180 nm and the frequency-spacing varying from 6 to 46-fold FSRs is realized at a low pump power. This approach could find potential and practical applications in many areas, such as optical metrology, optical communication and signal processing systems, for its excellent flexibility and robustness.

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices, with game-changing miniaturized components and prototypes that transform the state-of-the-art for quantum sensors and metrology. It brings together experts from the Universities of Birmingham, Glasgow, Nottingham, Southampton, Strathclyde and Sussex, NPL and currently links to over 15 leading international academic institutions and over 70 companies to build the supply chains and routes to market needed to bring 10–1000x improvements in sensing applications. It seeks, and is open to, additional partners for new application development and creates a point of easy open access to the facilities and supply chains that it stimulates or nurtures.

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices, with game-changing miniaturized components and prototypes that transform the state-of-the-art for quantum sensors and metrology. It brings together experts from the Universities of Birmingham, Glasgow, Nottingham, Southampton, Strathclyde and Sussex, NPL and currently links to over 15 leading international academic institutions and over 70 companies to build the supply chains and routes to market needed to bring 10–1000x improvements in sensing applications. It seeks, and is open to, additional partners for new application development and creates a point of easy open access to the facilities and supply chains that it stimulates or nurtures.

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices, with game-changing miniaturized components and prototypes that transform the state-of-the-art for quantum sensors and metrology. It brings together experts from the Universities of Birmingham, Glasgow, Nottingham, Southampton, Strathclyde and Sussex, NPL and currently links to over 15 leading international academic institutions and over 70 companies to build the supply chains and routes to market needed to bring 10–1000x improvements in sensing applications. It seeks, and is open to, additional partners for new application development and creates a point of easy open access to the facilities and supply chains that it stimulates or nurtures.

Recent developments in quantum photonics have initiated the process of bringing photonic-quantumbased systems out-of-the-lab and into real-world applications. As an example, devices to enable the exchange of a cryptographic key secured by the laws of quantum mechanics are already commercially available. In order to further boost this process, the next step is to transfer the results achieved by means of bulky and expensive setups into miniaturized and affordable devices. Integrated quantum photonics is exactly addressing this issue. In this paper, we briefly review the most recent advancements in the generation of quantum states of light on-chip. In particular, we focus on optical microcavities, as they can offer a solution to the problem of low efficiency that is characteristic of the materials typically used in integrated platforms. In addition, we show that specifically designed microcavities can also offer further advantages, such as compatibility with telecom standards (for exploiting existing fibre networks) and quantum memories (necessary to extend the communication distance), as well as giving a longitudinal multimode character for larger information transfer and processing. This last property (i.e., the increased dimensionality of the photon quantum state) is achieved through the ability to generate multiple photon pairs on a frequency comb, corresponding to the microcavity resonances. Further achievements include the possibility of fully exploiting the polarization degree of freedom, even for integrated devices. These results pave the way for the generation of integrated quantum frequency combs that, in turn, may find important applications toward the realization of a compact quantum-computing platform.

Passive fiber mode-locked lasers enable the excitation of multiple pulses per round trip representing a potential solutions for the increasing demand of practical optical sources with repetition rates of hundreds of GHz or higher. The control of such high repetition rate regimes is however a challenge. To this purpose, linear filters have been used in an "intracavity" configuration to force the repetition rate of the laser. This design is known as dissipative four wave mixing (DFWM) but it is usually unstable and hence marginally suitable for practical applications. We explore the use of nonlinear intracavity filters, such as integrated micro-ring resonators, capable of “driving” the FWM interaction in the laser. We term this approach as Filter-Driven FWM. With a proper choice of the filter properties in terms of free spectral range (FSR) and Q factor, we could observe stable regimes over a wide range of operating conditions, from high repetition rate oscillation at a 200GHz to the formation of two stable spectral comb replicas separated by the FSR of the main cavity (65MHz). High order filters, moreover, allow achieving nonlinear operation over large passbands. With an 11th order filter we achieve low-frequency mode-locking between the main cavity modes that oscillate within each resonance of the filter, producing burst pulsed operation. A stable mode-locked pulse train at 655GHz with an envelope of 42ps at 6.45MHz is achieved.

This review summarizes the results obtained in 2011 toward the development of an "integrated optical oscilloscope," encompassing research on new technologies for the measurement of ultrafast optical pulses in both amplitude and phase through the use of integrated devices, some of which are compatible with electronic circuit technology (CMOS).

We demonstrate temporal measurements of sub-picosecond optical pulses via time-to-frequency conversion in a 45-cm-long CMOS compatible high-index glass spiral waveguide. The measurements are based on efficient four-wave mixing in the C-band, using around 1 W of peak pump power. We achieve a resolution of 400 fs over a time window of 100 ps, representing a time-bandwidth product >; 250.

We report on light-induced optical tuning of colloidal photonic crystals doped with gold nanoparticles (Au-nps). By resonantly exciting the Au-np surface plasmon absorption with picosecond pulses at 0.53 micron in a standard pump-probe setup, we observed permanent changes in the stop band resonance around 1.7 micron, with blue wavelength shifts as large as 30 nm and associated to a nanoparticle reshaping. Fine tuning was achieved by controlling either the pulse energy or the irradiation time.

We investigate beam propagation in a novel Heavy Metal Oxide glass, reporting near infrared beam self-confinement and solitons, filamentation, interactions and conical emission at picoseconds and discussing them with the aid of a model.

We demonstrate two-dimensional spatial solitons excited by near-infrared picosecond pulses in Kerr-like heavy metal oxide glasses with a nonlinearity one order of magnitude larger than in fused silica. Solitons were obtained at 820 nm owing to the presence of multiphoton absorption, which prevented catastrophic collapse. © 2007 Optical Society of America., This work was funded by an “Integrated Action” between Italy and Spain (IT1890/HI2006-0095) and by the Spanish Ministry of Education and Science (MAT2005-06508-C02-01 and TEC2005-00074/MIC).

We summarize here our recent results on high-repetition-rate laser mode-locking via microring resonators. The recent realization of multiple wavelength oscillators based on high Q-factor resonators has profoundly impacted optical frequency combs for metrology and precision measurements and other areas. The ability to mode-lock these devices is important for achieving high-precision optical clocks in a monolithic format, offering enormous benefits in performance, cost, size, and power consumption for optical waveform synthesis, high-capacity telecommunications, optical analog-to-digital conversion, and many other applications. Here, we demonstrated a mode-locked laser based on a monolithic high Q resonator. This device produces stable, self-starting transform-limited optical pulses at 200.3 GHz, with a sub-100 kHz linewidth and extremely narrow amplitude noise bandwidth of

We demonstrated coherent Terahertz characterization based on the Terahertz Field Induced Second Harmonic effect in few microns thick Silica (SiO2) samples that can be easily operated with as little as a few hundred Volts. Our sample is an infinitely long 30 μm slit written in gold. The underlying idea of our work is that of exploiting the large breakdown voltage and the high nonlinearity of glass to achieve a large signal to noise ratio detection with a very weak optical probe at moderate bias fields, thus drastically reducing the electrodes gap. Our results pave the way to a novel approach towards broadband THz detection.

In this talk, the physics of microring resonators is discussed in the classical and quantum regimes, in the context of the exploitation of chi-3 effects in these cavities as done by our group. Through the implementation of a novel microring pumping scheme and a quantum reinterpretation of the frequency comb, we present an integrated platform for the generation of quantum optical states spread over multiple optical modes. The scheme allows for highly stable and potentially fullyintegrable quantum light sources. Following the demonstration of a multiplexed heralded photon source, the scheme also enabled the first demonstration of a new nonlinear process on the integrated platform (type II spontaneous four-wave mixing) allowing the first direct generation of polarization-diverse photon pairs, where the first time two ring modes can be pumped in a stable configuration.

The spatial features of a sub-wavelength terahertz source are not accessible using time-integrated knife-edge techniques due to the non-separable space-time nature of the radiated field and to systematic modifications induced by the blade itself. We show that combining knife-edge with a time resolved electro-optical sampling, the space-time coupling can be addressed and the source field profile can be exactly reconstructed.

WOS: 000349894700001, PubMed ID: 25711343, Terahertz technologies recently emerged as outstanding candidates for a variety of applications in such sectors as security, biomedical, pharmaceutical, aero spatial, etc. Imaging the terahertz field, however, still remains a challenge, particularly when sub-wavelength resolutions are involved. Here we demonstrate an all-optical technique for the terahertz near-field imaging directly at the source plane. A thin layer (, MERST (Ministere de l'Enseignement superieur, de la Recherche et de la Science); NSERC (National Science and Engineering Research Council) in Canada; Skim Latihan Akademik IPTA (SLAI) from the Ministry of Higher Education Malaysia (MOHE); "Le Fonds Quebecois de la Recherche sur la Nature et les Technologies'' (FQRNT)FQRNT; European CommissionEuropean Commission Joint Research Centre [630833, 299522, 327627], The work has been supported by the MERST (Ministere de l'Enseignement superieur, de la Recherche et de la Science) and by the NSERC (National Science and Engineering Research Council) in Canada. Ho Sze Phing gratefully acknowledges a fellowship from the Skim Latihan Akademik IPTA (SLAI) from the Ministry of Higher Education Malaysia (MOHE). Mostafa Shalaby would like to acknowledge the financial support from "Le Fonds Quebecois de la Recherche sur la Nature et les Technologies'' (FQRNT). Marco Peccianti acknowledges the support from the FP7 Marie Curie Actions of the European Commission, via the Career-Integration Grant (contract-No 630833). Matteo Clerici acknowledges the support from the FP7 Marie Curie Actions of the European Commission, via the International-Outgoing-Fellowship (contract-No 299522). Alessia Pasquazi acknowledges the support from the FP7 Marie Curie Actions of the European Commission, via the International Incoming Fellowships (contract-No 327627).

Four-wave mixing in a thermal tunable 5th order cascaded CMOS compatible ring resonators is experimentally and numerically investigated. Flat bandwidth conversion of 3.1GHz is obtained for a range of parameter.

We demonstrate a novel bi-chromatically pumped OPO operating on orthogonal polarizations in a CMOS compatible micro-ring resonator. Below threshold the device operates in the quantum regime and cross-polarized heralded photons are directly generated.

We demonstrated a 1.81 μm mode-locked figure-eight laser using an integrated 11-th order microring resonator. Mode-locked train centered at 1.81 μm with repetition rate of 9.09 MHz is achieved.

We observe second harmonic generation via random quasi-phase-matching in a 2.0 micron periodically poled, 1-cm-long, z-cut lithium tantalate. Away from resonance, the harmonic output profiles exhibit a characteristic pattern stemming from a stochastic domain distribution and a quadratic growth with the fundamental excitation, as well as a broadband spectral response. The results are in good agreement with a simple model and numerical simulations in the undepleted regime, assuming an anisotropic spread of the random nonlinear component. (C) 2010 Optical Society of America

We carried out second-harmonic generation in quasi-phase-matched ? -phase lithium niobate channel waveguides realized by proton exchange and surface periodic poling. Owing to a limited ferroelectric domain depth, we could observe the interplay between second-harmonic generation and self-phase modulation due to cascading and cubic effects, resulting in a nonlinear resonance shift. Data reduction allowed us to evaluate both the quadratic nonlinearity in the near infrared as well as the depth of the uninverted domains. © 2007 Optical

We implement a simple and powerful approach to characterize the domain distribution in the bulk of quadratic ferroelectric crystals via far-field second-harmonic spectroscopy. The approach is demonstrated in a lithium tantalate sample with periodic electric field poling and random mark-to-space ratio.