Search

Acetaminophen (APAP, also known as paracetamol) is a commonly used antipyretic and analgesic that is considered safe to use during pregnancy. However, a growing body of research indicates that gestational administration of APAP increased the risk of neurodevelopmental, reproductive and genitourinary disorders in offspring, alongside impairments in placental development. Notably, over-dosed APAP exhibits direct toxicity to endothelial cells, but there is very limited research investigating the impact of APAP on placental angiogenesis, a gap we aim to address in this study. Pregnant mice were gavaged with APAP (15, 50 and 150 mg/kg/d) from embryonic day 11.5 (E11.5) to E13.5. Administration of 150 mg/kg/d APAP leads to low birth weight (LBW) of the offspring and disordered vascular structures within the labyrinthine (Lab) layer of the placenta. This disruption is accompanied by a significant increase in Suppressor of Cytokine Signaling 3 (SOCS3) level, a negative regulator of the Janus kinase signal transducer 1 and activator of the transcription 3 (JAK1/STAT3) signaling. Meanwhile, Human umbilical vein endothelial Cells (HUVECs) with the treatment of 3 mM APAP exhibited reduced cell viability, whereas 1 mM APAP significantly affected the proliferation, migration, invasion and angiogenic capacities of HUVECs. Further, SOCS3 was up-regulated in HUVECs, accompanied by inhibition of JAK1/STAT3 pathways. Knocking-down SOCS3 in HUVECs restored the nuclear translocation of STAT3 and efficiently promoted cellular capacity of tube formation. Overall, short-term maternal administration of overdosed APAP impairs angiogenic capacities of fetal endothelial cells via SOCS3/JAK1/STAT3 pathway in the mouse placenta. This study reveals that overdose of APAP during pregnancy may adversely affect placental angiogenesis, emphasizing the importance of adhering to the safe principles of smallest effective dose for the shortest required durations. [Display omitted] • Exposure to acetaminophen (APAP) disrupted placental development in mice. • APAP exposure caused abnormal vascular structures in the placenta. • APAP exposure impaired angiogenesis via SOCS3/JAK1/STAT3 pathway. [ABSTRACT FROM AUTHOR]

[Display omitted] • A high performance self-powered UV PD was designed based on a sandwich configuration and with p-n junction, which is consisting of ZnO as the bottom n- layer, PEDOS as the top of p-layer, and ZnSe as the insertion layer. • The study suggestion that the ZnSe layer acts a key role in the superior property of the obtained device. • A high detectivity (1.42 × 1011) and a responsivity (5.44 mA/W) values were achieved under low light power (0.32 mW/cm2). • This study presented a new idea to efficiently enhance the properties of the organic–inorganic p-n heterojunction UV PDs. In the present work, a novel self-powered hybrid ultraviolet (UV) photodetector (PD) based on ZnO @ZnSe nanoarrays/poly(3,4-ethylenedioxyselenophene) (PEDOS) was fabricated and systematically investigated. The designed PD is based on a sandwich configuration and with p-n junction, which is consisting of ZnO as the bottom n- layer, PEDOS as the top of p-layer, and ZnSe as the insertion layer. The results of the study on the performances of UV PD under different conditions optical power density shows that the ZnO@ZnSe/PEDOS exhibits excellent detection of UV light, the device achieves the excellent responsivity (R) 5.44 mA/W and high detectivity (D*) 1.42 × 1011 Jones under the weaker optical power density (0.32 mW/cm2). The study concludes with a suggestion that the ZnSe layer acts a key role in the superior property of the obtained device, which is introduction of ZnSe layer between the p-PEDOS and n-ZnO layers reduces band migration and thus effectively enhances carrier transport within them, and demonstrating that the responsivity (R) of ZnO@ZnSe/PEDOS is almost 18 times that of the device without the ZnSe layer (0.3 mA/W). On the other hand, as the p- types PEDOS, which enhances the junction quality by reducing the composite center of the carrier, expanding the depletion region and providing a step energy level between the band edges of ZnO and ZnSe, improving the overall collection of photogenerated carriers. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop and validate radiomics signatures based on MRI for preoperative prediction of Ki-67 proliferative index (PI) expression in primary central nervous system lymphoma (PCNSL). A total of 341 patients with PCNSL were retrospectively analyzed, including 286 patients in one center as the training set and 55 patients in another two centers as the external validation set. Radiomics features were extracted and selected from preoperative contrast-enhanced T1-weighted images, fluid attenuation inversion recovery to build radiomics signatures according to the Ki-67 PI. The predictive performances of the radiomics model were evaluated using four classifiers including random forest, K-Nearest Neighbors, Neural Network and Decision Tree. A combined model was built by incorporating radiomics signature, clinical variables and MRI radiological characteristics using multivariate logistic regression analysis, and a nomogram was established to predict the expression of Ki-67 individually. The predictive performances of the models were evaluated using area under receiver operating characteristic curve (AUC) and decision curve analysis (DCA). Radiomics signatures were independent predictors of the expression level of Ki-67 (OR: 2.523, P < 0.001). RF radiomics models had the highest accuracy (0.934 in the training set and 0.811 in the external validation set) and F1 Score (0.920 in the training set and 0.836 in the external validation set). The clinic-radiologic-radiomics nomogram showed better predictive performance with AUCs of 0.877(95 % CI: 0.837–0.918) in the training set and 0.866(95 % CI: 0.774–0.957) in the external validation set. The calibration curve and DCA demonstrated goodness-of-fit and improved benefits in clinical practice of the nomogram. Nomograms integrating MRI-based radiomics and clinical-radiological characteristics could effectively predict Ki-67 PI in primary PCNSL. [ABSTRACT FROM AUTHOR]

L-Tryptophan (L-Trp) is essential for the human body and can only be obtained externally. It is important to develop a method to efficiently detect L-Trp in food. In this work, ionic liquid (IL) modified poly(3,4-ethylendioxythiophene)/ Titanium carbide (PEDOT/Ti 3 C 2 T X) was used as a substrate material to improve detection sensitivity. Molecular imprinted polymers (MIP) film for specific recognition of L-Trp was fabricated on the surface of modified electrodes using electrochemical polymerization. The monitoring results showed that the molecularly imprinted electrochemical sensors (MIECS) exhibited good linearity ranges (10−6 - 0.1 μM and 0.1–100 μM) with a low detection limit (LOD) of 2.09 × 10−7 μM. In addition, the MIECS exhibited remarkable stability, reproducibility, and immunity to interference. A good recovery (93.54–99.59%) was demonstrated in the detection of milk. The sensor was expected to be developed as a highly selective and sensitive portable assay, and applied to the detection of L-Trp in food. • Construction of a 3D conductive framework of PEDOT/Ti 3 C 2 T x /IL as a substrate material to improve the sensitivity of the sensor. • The sensor has good immunity and selectivity for various amino acids and biomolecules. • The sensor enables stable detection of L-Trp for 15 consecutive times. • The sensor has a detection limit of 2.09 × 10−7 μM in the range of 10−6-0.1 and 0.1-100 μM, enabling pic-omolar detection of L-Trp. [ABSTRACT FROM AUTHOR]

Highlights: [•] Ultrasound decreases the dielectric breakdown voltage of the coatings by 45V. [•] Ultrasound increases the contents of α-Al2O3 and 3Al2O3⋅2SiO2 in the coatings. [•] A cross point appears in the time–voltage responses of the two PEO systems. [ABSTRACT FROM AUTHOR]

[Display omitted] • TiO 2 NRs/BiOCl//TiO 2 NRs/BiOCl UV PD produces pyro-phototronic effect by a face-to-face assembly method. • BiOCl increases the surface oxygen vacancies of TiO 2 NRs, reducing the dark current of UV PD. • The Cl ions combined with Se increase the photosensitivity of the material, thus increasing UV PD performance. This study presents the construction of an organic–inorganic heterojunction ultraviolet (UV) photodetector (PD) through face-to-face assembly. The synergistic effects of bismuth oxychloride (BiOCl) and titanium dioxide nanorods (TiO 2 NRs) improve carrier transport efficiency and enhance the performance of the UV photodetector. The combination of BiOCl with TiO 2 NRs generates a pyro-phototronic effect and increases the surface oxygen vacancies of TiO 2 NRs, resulting in enhanced carrier transport efficiency, increased transient photocurrent, and reduced dark current in TiO 2 -based UV photodetectors. The enhanced photosensitivity of chloride (Cl) ions bound to selenium (Se) ions promotes easy electron injection from poly (3,4-ethylene dioxyselenophene) (PEDOS) into BiOCl, leading to accelerated electron transfer and a shortened response time. Compared to TiO 2 NRs/BiOCl//TiO 2 NRs/BiOCl, the TiO 2 NRs/BiOCl//PEDOS heterojunction exhibits a fast photoresponse with a rise time of 0.0802 s and a fall time of 79.8 ms. The responsivity is significantly improved from 11.0 mA/W to 108.8 mA/W (a 10-fold enhancement), and the detectivity is increased from 0.67 × 1011 Jones to 1.25 × 1011 Jones at 365 nanomaterials (0 V). These findings provide valuable insights into the mechanism by which BiOCl nanosheets enhance the photodetection performance of devices, contributing to the advancement of UV photodetector technology. [ABSTRACT FROM AUTHOR]

Renewable biomass-based materials have a huge potential to replace petroleum-based products in food packaging. Herein, pectin/gelatin films loaded with curcumin and silver nanoparticles (AgNPs) are prepared by solution-pouring technology to serve as antimicrobial multifunctional food packaging films. AgNPs and curcumin are found to equally distribute in the films. Fourier transform infrared spectroscopy (FT-IR) reveal the hydrogen bonding and electrostatic interaction among curcumin, AgNPs, pectin and gelatin. The composite films show good antioxidant activity, mechanical performance, hydrophobicity and antibacterial ability. The films of P-G C A 0.5 showed 99.57 ± 0.16 % and 100 % inhibition against E. coli and S. aureus , respectively. The films also demonstrate excellent water vapor barrier qualities. In addition, the composite films possess pH-responsive color change behaviors from yellow (pH 3–8) to light red (pH 8–9) to dark red (pH 11–12), which is suitable for monitoring the freshness of shrimp packaging based on pH changes during deterioration process. As sustainable biomass-based materials, the multifunctional composite films are promising in intelligent food packaging applications. [ABSTRACT FROM AUTHOR]

Poly (3,4-ethylenedioxythiophene) (PEDOT)-based molecularly imprinted electrochemical sensors have attracted widespread attention for monitoring contaminants in food and the environment. However, there are still problems such as poor hydrophilicity, easy agglomeration, and low selectivity in its preparation. In this work, a novel molecularly imprinted composite hollow sphere was prepared by a molecular imprinting technique using nitrogen-doped hollow carbon spheres as matrix material, and PEDOT and poly(methacrylic acid) as monomers. The selective binding capabilities and mechanism of the material to norfloxacin (NOR) were systematically investigated. Then the material-based sensor was constructed, and its electrochemical detection performance toward NOR was thoroughly studied. The sensor exhibited a wide linear range (0.0005–31 μM), a low detection limit (0.061 nM), satisfactory immunity to interference and stability. Besides, the sensor displayed better sensitivity and reliability (spiked recoveries of 98.0–105.2%, relative standard deviation of 3.45–5.69%) for detecting NOR in lake water, honey, and milk than high-performance liquid chromatography. This work provides a new strategy for developing poly(3,4-ethylenedioxythiophene)-based molecularly imprinted electrochemical sensors. [ABSTRACT FROM AUTHOR]

Although polymers based on polylactic acid (PLA) are considered by researchers as prime candidates for replacing traditional plastics, they are confronted with challenges including high production costs, limited thermal stability, and inferior impact resistance. In this study, novel composites with exceptional impact resistance, robust thermal stability, and satisfactory crystalline properties were fabricated by using PLA and polypropylene (PP) as raw materials, PP- g -MAH was employed as a compatibilizer to enhance the compatibility between the individual components. by adjusting the quantity of discarded cotton stalk fibers (CSF). The optimal mass ratio of CSF was determined to be 20%, resulting in a composite that exhibited a moderate increase of 56.31% in impact strength and a remarkable improvement of 23.05% in Vicat softening temperature. While the crystallinity was enhanced and the crystallization temperature (T c) value decreased, the storage modulus also increased. Furthermore, the observed increase in storage modulus within the temperature range of 80 °C–100 °C was attributed to the influence of polymer cold crystallization. The hydrophobicity of the composite was enhanced. Significantly, this strategy can be extended to the application of other plant fibers, improving the crystalline properties of semi-crystalline polymers such as PLA and exemplifying the true 'valorization of waste' through the secondary utilization of discarded CSF. [Display omitted] • Utilizing discarded cotton stalk fibers, a PLA-based composite was fabricated. • Composite have high impact resistance, thermal stability, and crystalline performance. • The utilization of discarded CSF enhances various properties of PLA-based composites. • It presents a novel strategy for cost-effective applications of PLA-based plastics. [ABSTRACT FROM AUTHOR]

This review focuses on various classes of ferrocene-containing hydrogels via covalently cross-linking and supramolecular strategies and analyzes their gelling mechanisms, characteristic structures, properties, and functional applications. • Ferrocene hydrogels fabricated by covalent cross-linking. • Ferrocene hydrogels fabricated by supramolecular assemblies. • Ferrocene hydrogels as biomedical, shape-memory and self-healing materials. • Ferrocene hydrogels present fascinating properties change upon redox switch. • Ferrocene microgels composed of cross-linked three-dimensional polymer networks. Stimuli-responsive hydrogels have lately attracted a lot of attention in the chemistry and material fields because of the "smart" change of their properties under outside stimuli including light, temperature, electric or magnetic field, pH, chemicals, shear stress, and redox reagents. Ferrocenyl (Fc) is often employed as a redox-responsive building unit due to its properties of chemical and electrochemical redox reversibility. This property involves reversible change between hydrophobicity and hydrophilicity, which endows hydrogels with unexpected features. Also, Fc derivatives are used as guest molecules featuring host–guest interactions with macrocyclic host molecules, mainly including cyclodextrins and pillararenes, commonly leading to the formation of supramolecular hydrogels with shape-memory, self-healing and sol–gel transition performances. This review focuses on the fabrication of various kinds of Fc-containing hydrogels and describes their gelling mechanisms, characteristic structures and properties, as well as functional applications. The review is divided into covalently cross-linked hydrogels and supramolecular cross-linked hydrogels. Furthermore, Fc-containing microgels constructed by chemically cross-linked three-dimensional polymer networks that are related to traditional hydrogels are also discussed. Fc-containing hydrogels and microgels are becoming more and more important as advanced functional materials, especially biomedical, shape-memory and self-healing materials. [ABSTRACT FROM AUTHOR]

Supercapacitors play a crucial role in energy storage applications due to their high energy and power densities. In this context, synthesizing composites such as: poly(3,4propylenedioxythiophene)/CoNi 2 S 4 @hollow carbon sphere (PProDOT/CoNi 2 S 4 @HCS) through solid-state thermal polymerization and hydrothermal ion exchange has gained significant attention. The PProDOT/CoNi 2 S 4 @HCS composite exhibits exceptional electrochemical performance, including a high specific capacitance of 1054 C g−1 and an initial capacity retention rate of 83.3% at 20 A g−1. This signifies that the composite can effectively store and deliver electrical energy. The composite possesses a three-dimensional core-shell structure, wherein HCS acts as a carbon-based substrate that prevents the aggregation of CoNi 2 S 4 nanoparticles. Simultaneously, the PProDOT film ensures the structural integrity of CoNi 2 S 4 and facilitates efficient electron/ion transfer within the composite. Furthermore, researchers have assembled a quasi-solid-state supercapacitor using the PProDOT/CoNi 2 S 4 @HCS composite and a gel electrolyte composed of polyvinyl alcohol/sulfonated cellulose/gelatin (PVA/sCMC/GEL/KOH). This supercapacitor demonstrates outstanding characteristics, such as a high energy density of 85.3 Wh kg−1, a high power density of 7957 W kg−1, and a capacity retention rate of 87.56% after 15,000 cycles at 4 A g−1. These results indicate that the composite-based supercapacitor can provide long-term stability and reliable performance under demanding operating conditions. [Display omitted] • A ternary core-shell material with ultra-high capacity retention at high current density has been realized. • The conductive polymer coating was prepared by in-situ solid-state thermal polymerization. • Designed a gel electrolyte with high ionic conductivity. [ABSTRACT FROM AUTHOR]

The corrosion behaviour of WE43 alloy in artificial saliva containing different fluoride ion concentrations were investigated in association with microstructural evolution. The WE43 alloy with an average grain size of 10–30 µm was mainly composed of α-Mg matrix and some RE-containing precipitates. The results of electrochemical corrosion and immersion corrosion tests indicated that the corrosion behaviour of WE43 alloy was continuously deteriorated with increasing F- concentration. This deterioration was attributed to the undesirable alterations in thickness, surface morphology and phase constitution of the corrosion products layer with the presence of F-, which damaged its corrosion protection effect in some degree. • Effect of F- on corrosion behaviour of WE43 alloy in artificial saliva was studied. • The WE43 alloy was mainly composed of α-Mg matrix and RE-containing precipitates. • The corrosion behaviour of WE43 alloy was worsened with increasing F- concentration. • Two possible corrosion mechanisms of WE43 alloy with and without F- were proposed. [ABSTRACT FROM AUTHOR]

[Display omitted] • The UV PD was constructed face-to-face from TiO 2 NRs: CQDs/FTO and PEDOS/FTO. • Sensitization of TiO 2 NRs by CQDs enhances the pyro-phototronic effect of TiO 2 NRs. • CQDs and PEDOS interact with each other and have matching energy levels. • The photovoltaic-pyroelectric coupled effect enhanced the performance. • The UV PD have high responsivity and detectivity in the self-powered model. TiO 2 -based ultraviolet (UV) photodetectors (PDs) with broadband optical detection range are widely used in commercial and military applications. Nevertheless, the self-powered UV PDs of TiO 2 nanoarrays (NRs) have relatively low response rates and slow response times. Here, a high responsivity self-powered p-n heterojunction UV PD based on TiO 2 NRs: CQDs/FTO and PEDOS/FTO is fabricated by a simple face-to-face assembly process. The pyroelectric effect of TiO 2 NRs is enhanced by sensitizing TiO 2 NRs with CQDs, which would reduce the bandgap value of TiO 2 NR, broaden the range of photoresponse, and reduce recombination of electron-hole. Furthermore, the pyro-phototronic effect of CQDs, the energy level matching from CQDs to PEDOS and the interaction between –OH in CQDs and ethylene oxide groups in PEDOS enhance the performance of the prepared UV PDs. The TiO 2 NRs: CQDs//PEDOS UV PDs achieve a high photo-responsivity and photo-detectivity of 150.95 mA/W and 3.73 × 1011 Jones at 0 bias (365 nm), respectively, which are better than those at wavelengths of 380 nm. We also found that the photocurrent induced via the pyro-phototronic effect increases with the light power intensity. This work points the way for photovoltaic and photo-induced pyro-phototronic effects to improve the performance of TiO 2 NRs-based UV PDs. [ABSTRACT FROM AUTHOR]

Oxidative stress plays an important role in aging-related neurodegeneration. This study used littermates of WT and Nox2-knockout (Nox2KO) mice plus endothelial cell-specific human Nox2 overexpression-transgenic (HuNox2Tg) mice to investigate Nox2-derived ROS in brain aging. Compared with young WT mice (3-4 months), aging WT mice (20-22 months) had obvious metabolic disorders and loss of locomotor activity. Aging WT brains had high levels of angiotensin II (Ang II) and ROS production; activation of ERK1/2, p53, and γH2AX; and losses of capillaries and neurons. However, these abnormalities were markedly reduced in aging Nox2KO brains. HuNox2Tg brains at middle age (11-12 months) already had high levels of ROS production and activation of stress signaling pathways similar to those found in aging WT brains. The mechanism of Ang II-induced endothelial Nox2 activation in capillary damage was examined using primary brain microvascular endothelial cells. The clinical significance of Nox2-derived ROS in aging-related loss of cerebral capillaries and neurons was investigated using postmortem midbrain tissues of young (25-38 years) and elderly (61-85 years) adults. In conclusion, Nox2 activation is an important mechanism in aging-related cerebral capillary rarefaction and reduced brain function, with the possibility of a key role for endothelial cells. [ABSTRACT FROM AUTHOR]

The development of novel polymer carriers, which have well-defined structures and desired conjugative abiltiy to therapeutic agents, is still an urgent requirement in the field of polymer–drug conjugates (PDCs) used for stimuli-responsive drug delivery systems. Herein, we present the controlled synthesis of a novel amphiphilic polynorbornene-based block copolymer, side-chain containing hydrophobic functionalizable benzaldehyde groups and hydrophilic dentritic triethylene glycol (TEG) moieties, by the ring-opening metathesis polymerization (ROMP) using the 3rd generation Grubbs catalyst 1 as the initiator. The obtained copolymer can self-assemble into spherical micelles with the average size of 84 nm in water, and its remarkable ability as the polymer carrier to fabricate PDCs was fully confirmed by the efficient covalently Schiff-base linking of its side-chain benzaldehyde groups to amino groups of model drugs including O-benzylhydroxylamine (BHA), 1-hexadecanamine, tryptophan and benzocaine. Notably, torispherical micelles with the average size of 90 nm were also obtained by the self-assembly of the formed polymer-BHA conjugate, and the pH-triggered release of BHA molecules from the micelles was observed at acidic environments (for example, pH 4.0 and 2.5). Therefore, the present polynorbornene block copolymer is expected to find potential applications in the stimuli-responsive drug delivery systems as a promising polymer carrier to form PDCs via acid-responsive Schiff-base linkage with amino-containing drugs such as doxorubicin, daunorubicin, epirubicin and pirarubicin. [ABSTRACT FROM AUTHOR]

In this study, a molecularly imprinted polymer (MIP) electrochemical sensor based on poly(3,4-propylenedioxythiophene)/chitosan/Au (PProDOT/CS/Au) composite modification was designed for highly sensitive and selective detection of TC. Green synthesis of CS/Au without the use of reducing agents, followed by in-situ oxidation polymerization of PProDOT. The high electrochemical activity and high stability of PProDOT, the numerous functional groups (-OH, -NH 2 ) of CS, and the excellent electron transport capacity of AuNPs, which provided a suitable incubation chamber for the production of imprinted cavities. Meanwhile, combined with the specific recognition ability of MIP, it showed superior performance over bare glassy carbon electrodes. Under the optimal experimental conditions, this sensor showed good linearity for TC in the concentration ranges of 0.0001-100 μM, with a low limit of detection (LOD) of 0.19 nM. At the same time, the sensor exhibited satisfactory selectivity, repeatability, reproducibility and stability. It was evident from the results of the study that the sensor designed in this paper showed considerable potential for application in the detection of TC in pharmaceuticals, the environment, and food samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Solar-powered interfacial water evaporation is a promising technique for alleviating freshwater stress. However, the evaporation performance of solar evaporators is still constrained by low photothermal conversion efficiency and high water evaporation enthalpy. Herein, 0D carbon quantum dots (CQDs) are combined with 2D MXene to serve as a hybrid photothermal material to enhance the light absorption and photothermal conversion ability, meanwhile sodium carboxymethyl cellulose (CMC)/polyacrylamide (PAM) hydrogels are used as a substrate material for water transport to reduce the enthalpy of water evaporation. The synergistic effect in 0D CQDs/2D MXene hybrid photothermal materials accelerate the carrier transfer, inducing efficient localized surface plasmon resonance (LSPR) effect. This results in the enhanced photothermal conversion efficiency. The integrated hydrogel evaporators demonstrate a high evaporation rate (1.93 and 2.86 kg m -2  h -1 under 1 and 2 sunlights, respectively) and low evaporation enthalpy (1485 J g -1 ). In addition, the hydrogel evaporators are applied for photothermal sensing and temperature difference power generation (TEG). The TEG device presents an efficient output power density (230.7 mW m -2 ) under 1 sunlight. This work provides a feasible approach for regulating and controlling the evaporation performances of hydrogel evaporators, and gives a proof-of-concept for the design of multipurpose solar evaporation systems., (© 2024 Wiley‐VCH GmbH.)

Objective: The level of mitochondrial DNA copy number (mtDNA-CN) in peripheral blood cells had been identified to be involved in several immune and cardiovascular diseases. Thus, the aim of this study is to evaluate the levels of mtDNA-CN in Kawasaki disease (KD) and to construct a nomogram prediction for coronary artery lesions in children with KD., Methods: One hundred and forty-four children with KD diagnosed from March 2020 to March 2022 were involved in the study. The clinical features and laboratory test parameters of these children were assessed between the KD and normal groups. Univariable and multivariable analyses were performed sequentially to identify the essential risk factors. Subsequently, a nomogram prediction was constructed., Results: A total of 274 children were included in the analysis. Of these, 144 (52.6%) represented the KD group. Peripheral blood DNA mtDNA qPCR showed that the -log value of mtDNA-CN in the KD group (6.67 ± 0.34) was significantly higher than that in the healthy group (6.40 ± 0.18) (P<0.001). The area under the ROC curve for mtDNA-CN in distinguishing KD was 0.757. MtDNA-CN (OR = 13.203, P = 0.009, 95% CI 1.888-92.305), RBC (OR = 5.135, P = 0.014, 95% CI 1.394-18.919), and PA (OR = 0.959, P = 0.014, 95% CI 0.927-0.991) were identified as independent risk factors for coronary artery dilation in children with KD. Finally, the nomogram predictive was established based on the results of multivariable analysis, demonstrating the satisfied prediction and calibration values., Conclusion: The results of this study revealed that mtDNA-CN could be used as a biomarker in predicting the development of KD. Furthermore, the higher the mtDNA-CN was significantly associated with coronary artery dilation in KD., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Peng, Yue, Zhang, Li, Hua, Li, Zheng and Liu.)

Aim: Acetaminophen (APAP) is clinically recommended as analgesic and antipyretic among pregnant women. However, accumulating laboratory evidence shows that the use of APAP during pregnancy may alter fetal development. Since fetal stage is a susceptible window for early oogenesis, we aim to assess the potential effects of maternal administration of APAP on fetal oocytes. Results: Pregnant mice at 14.5 dpc (days post-coitus) were orally administered with APAP (50 and 150mg/kg.bw/day) for 3 days; meanwhile, 14.5 dpc ovaries were collected and cultured with APAP or its metabolite N-acetyl-p-benzoquinone imine (NAPQI; 5 and 15 μ M ) for 3 days. It showed that APAP caused meiotic aberrations in fetal oocytes through its metabolite NAPQI, including meiotic prophase I (MPI) progression delay and homologous recombination defects. Co-treatment with nicotinamide (NAM) or nicotinamide riboside chloride (NRC), nicotinamide adenine dinucleotide (NAD + ) supplements, efficiently restored the MPI arrest, whereas the addition of the inhibitor of sirtuin 7 (SIRT7) invalidated the effect of the NAD + supplement. In addition, RNA sequencing revealed distorted transcriptomes of fetal ovaries treated with NAPQI. Furthermore, the fecundity of female offspring was affected, exhibiting delayed primordial folliculogenesis and puberty onset, reduced levels of ovarian hormones, and impaired developmental competence of MII oocytes. Innovation: These findings provide the first known demonstration that NAPQI, converted from maternal administration of APAP, disturbs meiotic process of fetal oocytes and further impairs female fecundity in adulthood. The concomitant oral dosing with NAM further supports the benefits of NAD + supplements on oogenesis. Conclusion: Short-term administration of APAP to pregnant mouse caused meiotic aberrations in fetal oocytes by its metabolite NAPQI, whereas co-treatment with NAD + supplement efficiently relieves the adverse effects by interacting with SIRT7.

Ferroptosis is a novel form of membrane-dependent cell death that differs from other cell death modalities such as necrosis, apoptosis, and autophagy. Multiple sclerosis (MS) is a chronic inflammatory disease of the central nervous system primarily affecting brain and spinal cord neurons. Although the pathogenesis of these two conditions may seem unrelated, recent studies have indicated a connection between ferroptosis and multiple sclerosis. In fact, ferroptosis plays a significant role in the development of MS, as evidenced by the presence of elevated iron levels and iron metabolism abnormalities in the brains, spinal cords, and other neurons of MS patients. These abnormalities disrupt iron homeostasis within cells, leading to the occurrence of ferroptosis. However, there is currently a lack of research on the diagnostic value of ferroptosis-related genes in multiple sclerosis. In this study, we employed bioinformatics methods to identify ferroptosis-related genes (ATM, GSK3B, HMGCR, KLF2, MAPK1, NFE2L1, NRAS, PCBP1, PIK3CA, RPL8, VDAC3) associated with the diagnosis of multiple sclerosis and constructed a diagnostic model. The results demonstrated that the diagnostic model accurately identified the patients' condition. Subsequently, subgroup analysis was performed based on the expression levels of ferroptosis-related genes, dividing patients into high and low expression groups. The results showed differences in immune function and immune cell infiltration between the two groups. Our study not only confirms the correlation between ferroptosis and multiple sclerosis but also demonstrates the diagnostic value of ferroptosis-related genes in the disease. This provides guidance for clinical practice and direction for further mechanistic research., (© 2024. The Author(s).)

The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic branched triethylene glycol moieties and hydrophobic branched ferrocenyl moieties is designed and prepared by one-pot ring-opening metathesis polymerization, and is used as the stabilizer for metal (Au, Ag and Pd) nanoparticles. These metal nanoparticles (Au nanoparticles: 3.5 ± 3.0 nm; Ag nanoparticles: 7.2 ± 4.0 nm; Pd nanoparticles: 2.5 ± 1.0 nm) are found to be highly active in both the 4-nitrophenol reduction and Suzuki-Miyaura reactions. In the 4-nitrophenol reduction, Pd nanoparticles have the highest catalytic ability (TOF: 2060 h -1 ). In addition, Pd nanoparticles are also an efficient catalyst for Suzuki-Miyaura reactions (TOF: 1980 h -1 ) and possess good applicability for diverse substrates. The amphiphilic dendronized copolymer will open a new door for the development of efficient metal nanoparticle catalysts.

Stress-induced corrosion impairs the mechanical integrity of magnesium (Mg) and its alloys as potential orthopedic implants. Although there has been extensive work reporting the effects of stress on Mg corrosion in vitro, the geometric design principles of the Mg-based orthopedic devices still remain largely unknown. In this work, a numerical simulation model mimicking fractured bone fixation and surgical animal models were applied to investigate the effects of the geometric design of Mg screws on the stress distribution and the stress-induced degradation behavior. Finite element (FE) analysis was used for calculation of stress concentrations around the Mg screws, with different thread type, thread pitch, and thread width. Afterward, the Mg screws of the pre-optimization and post-optimization groups exhibiting the highest and lowest stress concentrations, respectively, were implanted in the fractured distal femora and back subcutaneous tissue of rabbits. Encouragingly, there was a significant difference between the pre-optimization and the post-optimization groups in the degradation rate of the stressed screw parts located around the fracture line. Interestingly, there was no significant difference between the two groups in the degradation rate of the non-stressed screw parts. Consistently, the Mg screw post-optimization exhibited a significantly lower degradation rate than that pre-optimization in the back subcutaneous implantation model, which generated stress in the whole screw body. The alteration in geometric design did not affect the corrosion rate of the Mg screws in an immersion test without load applied. Importantly, an accelerated new bone formation with less fibrous encapsulation around the screws was observed in the Mg group post-optimization relative to the Mg group pre-optimization and the poly (lactic acid) group. Geometry optimization may be a promising strategy to reduce stress-induced corrosion in Mg-based orthopedic devices. STATEMENT OF SIGNIFICANCE: Stress concentrations influence corrosion characteristics of magnesium (Mg)-based implants. The geometric design parameters, including thread type, thread pitch, and thread width of the Mg screws, were optimized through finite element analysis to reduce stress concentrations in a fractured model. The Mg screws with triangular thread type, 2.25 mm pitch, and 0.3 mm thread width, exhibiting the lowest maximum von Mises stress, showed a significant decrease in the volume loss relative to the Mg screws pre-optimization. Compared with the Mg screw pre-optimization and the poly(lactic acid) screw, the Mg screw post-optimization favored new bone formation while inhibiting fibrous encapsulation. Collectively, optimization in the geometric design is a promising approach to reduce stress-induced corrosion in Mg-based implants., Competing Interests: Declaration of competing interest We the undersigned declare that this manuscript is original, has not been published before and is not currently being considered for publication elsewhere. We wish to confirm that there are no known conflicts of interest associated with this publication and there has been no significant financial support for this work that could have influenced its outcome. We confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed. We further confirm that the order of authors listed in the manuscript has been approved by all of us. We confirm that we have given due consideration to the protection of intellectual property associated with this work and that there are no impediments to publication, including the timing of publication, with respect to intellectual property. In so doing we confirm that we have followed the regulations of our institutions concerning intellectual property. We further confirm that any aspect of the work covered in this manuscript that has involved either experimental animals or human patients has been conducted with the ethical approval of all relevant bodies and that such approvals are acknowledged within the manuscript., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Against the backdrop of ecological conservation and high-quality development in the Yangtze River Basin, there is an increasing demand for enhanced water pollution prevention and control in small watersheds. To delve deeper into the intricate relationship between pollutants and environmental features, as well as explore the key factors triggering pollution and their corresponding warning thresholds, this study was conducted along the Jiuqu River, a strategically managed unit in the upstream region of the Yangtze River, between 2022 and 2023. A total of seven monitoring sites were established, from which 161 valid water samples were collected. The k-nearest neighbors mutual information (KNN-MI) technique indicated that water temperature (WT) and relative humidity (RH) were the main environmental factors. The principal component analysis (PCA) of ten water quality parameters and three environmental factors unveiled the distinguishing characteristics of the primary pollution sources. Consequently, the pollution sources were categorized as treated wastewater > groundwater runoff > phytoplankton growth > abstersion wastewater > agricultural drainage. Furthermore, the regression decision tree (RDT) algorithm was used to explore the combined effects between pollutants and environmental factors, and to provide visual decision-making process and quantitative results for understanding the triggering mechanism of organic pollution in Jiuqu River. It conclusively identifies total phosphorus (TP) as the predominant triggering parameter with the threshold of 0.138 mg/L. The study is helpful to deal with potential water pollution problems preventatively and shows the interpretability and predictive performance of the RDT algorithm in water pollution prevention., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

With the growing demand for eco-friendly materials in wearable smart electronic devices, renewable, biocompatible, and low-cost hydrogels based on natural polymers have attracted much attention. Cellulose, as one of the renewable and degradable natural polymers, shows great potential in wearable smart electronic devices. Multifunctional conductive cellulose-based hydrogels are designed for flexible electronic devices by adding sodium carboxymethyl cellulose and MXene into polyacrylic acid networks. The multifunctional hydrogels possess excellent mechanical property (stress: 310 kPa; strain: 1127 %), toughness (206.67 KJ m -3 ), conductivity (1.09 ± 0.12 S m -1 ) and adhesion (82.19 ± 3.65 kPa). The multifunctional conductive hydrogels serve as strain sensors (Gauge Factor (GF) = 5.79, 0-700 % strain; GF = 14.0, 700-900 % strain; GF = 40.36, 900-1000 % strain; response time: 300 ms; recovery time: 200 ms) and temperature sensors (Temperature coefficient of resistance (TCR) = 2.5755 °C -1 at 35 °C- 60 °C). The sensor detects human activities with clear and steady signals. A distributed array of flexible sensors is created to measure the magnitude and distribution of pressure and a hydrogel-based flexible touch keyboard is also fabricated to recognize writing trajectories, pressures and speeds. Furthermore, a flexible hydrogel-based supercapacitor powers the LED and exhibits good cyclic stability over 15,000 charge-discharge cycles., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Objective  The purpose of this study was to evaluate the prognostic significance of corrected baseline metabolic parameters in fluorodeoxyglucose positron emission tomography imaging ( 18 F-FDG PET/CT) for 3-year progression-free survival (PFS) in patients with primary diffuse large B cell lymphoma (DLBCL). Patients and Methods  Retrospective clinical and pathological data were collected for 199 patients of DLBCL diagnosed between January 2018 and January 2021. All patients underwent 18 F-FDG PET/CT scans without any form of treatment. The corrected maximum standardized uptake value (corSUVmax), corrected mean standardized uptake value (corSUVmean), corrected whole-body tumor metabolic volume sum (corMTVsum), and corrected total lesion glycolysis of whole body (corTLGtotal) were corrected using the SUVmean in a 1-cm diameter mediastinal blood pool (MBP) from the descending thoracic aorta of patients. Kaplan-Meier survival curves and Cox regression were used to examine the predictive significance of corrected baseline metabolic parameters on 3-year PFS of patients. The incremental values of corrected baseline metabolic parameters were evaluated by using Harrell's C-indices, receiver operating characteristic, and Decision Curve Analysis. Results  The multivariate analysis revealed that only the National Comprehensive Cancer Network (NCCN)-International Prognostic Index (IPI) and corMTVsum had an effect on 3-year PFS of patients ( p  < 0.05, respectively). The Kaplan-Meier survival analysis demonstrated significant differences in PFS between the risk groups classified by corSUVsum, corMTVsum, and corTLGtotal (log-rank test, p  < 0.05). The predictive model composed of corMTVsum and corTLGtotal surpasses the predictive performance of the model incorporating MTVsum and TLGtotal. The optimal performance was observed when corMTVsum was combined with NCCN-IPI, resulting in a Harrell's C index of 0.785 and area under the curve values of 0.863, 0.891, and 0.947 for the 1-, 2-, and 3-year PFS rates, respectively. Conclusion  The corMTVsum offers significant prognostic value for patients with DLBCL. Furthermore, the combination of corMTVsum with the NCCN-IPI can provide an accurate prediction of the prognosis., Competing Interests: Conflict of Interest None declared., (The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. ( https://creativecommons.org/licenses/by/4.0/ ).)

Photocatalysts immobilized on hydrogels is a win-win mode, which not only improves photocatalysis but also successfully prevents catalyst loss, making it easy to separate and reuse during catalytic process. Here, ZnO-Ti 3 C 2 T X photocatalysts are loaded into the chitosan/polyacrylic acid hydrogel networks, realizing the efficiently photocatalytic degradation of norfloxacin. The chitosan-based composite hydrogel features rich functional groups and a dense pore structure, which is beneficial to antibiotic enrichment and photocatalytic degradation. The effects of different catalyst ratios, dosage, initial concentrations and pH on the degradation efficiency are investigated. The norfloxacin degradation rate constant is 0.012 min -1 and its degradation efficiency reaches up to 90 % after 240 min. Importantly, the photocatalytic composite hydrogel still retains 85 % degradation efficiency after 6 cycles. Moreover, e - plays a significant role in the degradation process. This work converts the traditional powder photocatalysts into bulk photocatalysts (photocatalytic hydrogels) to accomplish efficient degradation and rapid recycling for contaminant removal., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Exploiting high-efficiency and durable electrocatalysts toward the methanol oxidation reaction (MOR) is crucial for the advancement of direct methanol fuel cells (DMFCs). Herein, we demonstrate the loading of platinum-palladium bimetallic nanoparticles (Pt-Pd NPs) onto poly(3,4-ethylenedioxythiophene) (PEDOT)-embellished titanium carbide (Ti 3 C 2 Tx) nanosheets as the electrocatalyst (Ti 3 C 2 Tx/PEDOT/Pt-Pd) via a facile and rapid chemical reduction-assisted one-pot hydrothermal process. The structural and morphological analyses of Ti 3 C 2 Tx/PEDOT/Pt-Pd indicate that the three-dimensional (3D) hybrid structure formed between PEDOT and Ti 3 C 2 Tx provides a sizable active surface and more active sites, which enhances the homogeneous dispersion of the Pt-Pd NPs and facilitates mass transfer. The Schottky junctions formed between PEDOT and Pt-Pd NPs contribute to charge transfer. The electronic effects and synergistic interactions between the support and catalyst favor the electrocatalytic activity of the catalyst. The electrochemical test results reveal that the Ti 3 C 2 Tx/PEDOT/Pt-Pd catalyst has prominent electrocatalytic capability for the MOR. Compared with Ti 3 C 2 Tx/Pt-Pd and commercial Pt/C catalysts, the Ti 3 C 2 Tx/PEDOT/Pt-Pd catalyst has a larger electrochemical activity surface area (ECSA = 122 m 2 g -1 ) and higher mass activity (MA = 1445.4 mA mg -1 ), as well as better CO tolerance and more reliable long-term durability (a peak current density retention of 71% after 5200 s).

Irritable bowel syndrome (IBS) is a very common refractory disease. Its exact pathophysiological mechanism is still unclear. Despite the availability of plentiful drugs to control IBS, most patients do not respond well. Ginsenoside Rd is one of the major active components of Panax ginseng, which has been verified to produce various pharmacological actions. However, the role of ginsenoside Rd in modulating smooth muscle contractility is still undefined. The aim of this study is to investigate the effects of ginsenoside Rd on intestinal contractility and related mechanisms in IBS.

Biopolymer-derived hydrogels with low-cost and sustainable features have been considered as fascinating supported materials for metal nanoparticles. Cellulose, as the most abundant biopolymer, is a renewable raw material to prepare biopolymer-derived hydrogels for catalysis. Here, a cellulose-based hydrogel is designed to load bimetallic (AuAg, AuPd and AgPd) nanoparticles. 4-Nitrophenol reduction and Suzuki-Miyaura coupling reactions are selected to evaluate and compare the catalytic performance of the resulting bimetallic nanoparticle-loaded cellulose-based composite hydrogels. The bimetallic nanocomposite hydrogels are easy to be recycled over 10 times during the catalytic experiments and possess good applicability and generality for various substrates. The catalytic activity of bimetallic nanocomposite hydrogels was compared with recent literatures. In addition, the possible catalytic mechanism is also proposed. This work is expected to give a new insight for designing and preparing bimetallic nanoparticle-based cellulose hydrogels and proves its applicability and prospect in the catalytic field., Competing Interests: Declaration of competing interest There are no conflicts to declare., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Early diagnosis can help prevent and reduce the adverse effects of gestational diabetes mellitus (GDM). This study intended to investigate key circulating long non-coding RNAs (lncRNAs) as novel biomarkers for diagnosis of GDM at the early stages. First, lncRNA microarray analysis was conducted for plasma samples of GDM women before delivery and 48 h after delivery. The expression of differentially expressed lncRNAs in clinical samples at different trimesters was randomly validated by quantitative polymerase chain reaction (PCR). Moreover, the correlation between lncRNA expression and oral glucose tolerance test (OGTT) level in GDM women during the second trimester was analyzed, followed by evaluating the diagnostic value of key lncRNAs during different trimesters using receiver operating characteristic (ROC) curve. Higher NONHSAT054669.2 expression and lower ENST00000525337 expression were revealed in GDM women before delivery relative to 48 h after delivery ( P  < 0.05). The expression of NONHSAT054669.2 and ENST00000525337 in GDM women during the first and second trimesters was dramatically higher than pregnant women ( P  < 0.05) with normal glucose tolerance (NGT). During the second trimester, NONHSAT054669.2 expression was positively related to OGTT level at 1 h ( r  = 0.41455, P  < 0.001). Furthermore, ROC curve analysis revealed that ENST00000525337 alone, NONHSAT054669.2 alone, and their combination had high diagnostic value for GDM during the first (area under the ROC curve (AUC) = 0.979, 0.956, and 0.984, respectively) and second (AUC = 0.829, 0.809, and 0.838, respectively) trimesters (all P  < 0.001). The plasma level of NONHSAT054669.2 and ENST00000525337 may be applied as novel diagnostic biomarkers for early diagnosis of GDM.

Due to the good electrical, optical, magnetic, catalytic properties, transition metal nanoparticles (TMNPs) have been becoming more and more interesting in the fileds of environment, material, biomedicine, catalysis, and so on. Here, tannic acid (TA) is used as a green and efficient stabilizer to fabricate all kinds of TMNPs including AuNPs, AgNPs, CuNPs and PdNPs. These TMNPs possess small sizes ranging from 1 nm to 6 nm, which is conducive to several catalytic reactions in aqueous solution, such as 4-nitrophenol (4-NP) reduction, CuAAC reactions and Suzuki-Miyaura coupling reactions. AuNPs and PdNPs are found to have distinctly higher catalytic activities than AgNPs and CuNPs in the 4-NP reduction process. Especially, PdNPs show the highest catalytic activities with TOF up to 7200 h -1 in the 4-NP reduction. Furthermore, PdNPs also exhibit satisfying catalytic performance in the Suzuki-Miyaura coupling process, and CuNPs are catalytically active in the copper-catalyzed azide alkyne cycloaddition (CuAAC) reactions. The applicability and generality of PdNPs and CuNPs are respectively confirmed via the reaction between different substrates in the Suzuki-Miyaura coupling reactions and the CuAAC reactions. This work present a simple, fast, green and efficient strategy to synthesize TMNPs for multiple catalysis., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

As one of the most promising fixators developed for anterior cruciate ligament (ACL) reconstruction, biodegradable magnesium (Mg)-based interference screws have gained increasing attention attributed to their appropriate modulus and favorable biological properties during degradation after surgical insertion. However, its fast degradation and insufficient mechanical strength have also been recognized as one of the major causes to limit their further application clinically. This review focused on the following four parts. Firstly, the advantages of Mg or its alloys over their counterparts as orthopaedic implants in the fixation of tendon grafts in ACL reconstruction were discussed. Subsequently, the underlying mechanisms behind the contributions of Mg ions to the tendon-bone healing were introduced. Thirdly, the technical challenges of Mg-based interference screws towards clinical trials were discussed, which was followed by the introduction of currently used modification methods for gaining improved corrosion resistance and mechanical properties. Finally, novel strategies including development of Mg/Titanium (Ti) hybrid fixators and Mg-based screws with innovative structure for achieving clinically customized therapies were proposed. Collectively, the advancements in the basic and translational research on the Mg-based interference screws may lay the foundation for exploring a new era in the treatment of the tendon-bone insertion (TBI) and related disorders., Competing Interests: The authors declare no competing financial interests., (© 2021 The Authors.)

Background: Anemia caused by left ventricular outflow tract obstruction in patients with hypertrophic obstructive cardiomyopathy (HOCM) has been reported, however, large clinical studies confirming this association are lacking. The objective of the present study was to investigate the relationship between left ventricular outflow tract (LVOT) pressure gradient and hemoglobin in patients with hypertrophic cardiomyopathy (HCM)., Methods: Patient demographics, laboratory and echocardiography data from 310 patients diagnosed with HCM from our hospital who had undergone echocardiography from July 2014 to March 2019 were collected from medical records. Patients were classified into HOCM and non-HOCM groups., Results: Compared to the non-HOCM group, patients in the HOCM group had a lower hemoglobin level (112.2 ± 16.7 vs. 132.9 ± 22.2 g/L, p < 0.001). In addition, significant negative correlations between hemoglobin and LVOT pressure gradient were found in males (r = -0.568, p < 0.001) and females (r = -0.589, p < 0.001). Receiver operating characteristic curve analysis revealed that the best cut-off value for hemoglobin to predict HOCM in male patients was 128 g/L with 74.19% sensitivity and 75.51% specificity (area under the curve: 0.763, p < 0.001). For female patients, the cut-off value was 125 g/L, with a sensitivity and specificity of 89.39% and 48.48%, respectively (area under the curve: 0.718, p < 0.001)., Conclusions: Our results indicate that hemoglobin level is inversely proportional to the LVOT gradient pressure and has value for predicting outflow tract obstruction in patients with HCM.

Microglia express constitutively a Nox2 enzyme that is involved in neuroinflammation by the generation of reactive oxygen species (ROS). Amyloid β (Aβ) plays a crucial role in Alzheimer's disease. However, the mechanism of Aβ-induced microglial dysfunction and redox-regulation of microgliosis in aging remains unclear. In this study, we examined Nox2-derived ROS in mediating microglial response to Aβ peptide 1-42 (Aβ 42 ) stimulation in vitro, in aging-associated microgliosis in vivo and in post-mortem human samples. Compared to controls, Aβ 42 markedly induced BV2 cell ROS production, Nox2 expression, p47 phox and ERK1/2 phosphorylation, cell proliferation and IL-1β secretion. All these changes could be inhibited to the control levels in the presence of Nox2 inhibitor or superoxide scavenger. Compared to young (3-4 months) controls, midbrain tissues from wild-type aging mice (20-22 months) had significantly higher levels of Nox2-derived ROS production, Aβ deposition, microgliosis and IL-1β production. However, these aging-related changes were reduced or absent in Nox2 knockout aging mice. Clinical significance of aging-associated Nox2 activation, microgliosis and IL-1β production was investigated using post-mortem midbrain tissues of humans at young (25-38 years) and old age (61-85 years). In conclusion, Nox2-dependent redox-signalling is crucial in microglial response to Aβ 42 stimulation and in aging-associated microgliosis and brain inflammation.

Mercury contamination in soil and water has become a major concern to environmental quality and human health. Among the existing remediation technologies for mercury pollution control, sorption via iron-based materials has received wide attention as they are environmental friendly and economic, and their reactivity is high and controllable through modulating the morphology and surface properties of particulate materials. This paper aimed to provide a comprehensive overview on environmental application of a variety of iron-based sorbents, namely, zero valent iron, iron oxides, and iron sulfides, for mercury remediation. Techniques to improve the stability of these materials while enhancing mercury sequestration, such as nano-scale size control, surface functionalization, and mechanical support, were summarized. Mechanisms and factors affecting the interaction between mercury and iron-based materials were also discussed. Current knowledge gaps and future research needs are identified to facilitate a better understanding of molecular-level reaction mechanisms between iron-based materials and mercury and the long-term stability of the immobilized mercury.

Indole propionic acid (IPA) is one of the important plant growth hormones for promoting rooting and fruiting. Labeling IPA receptor in plant tissues is able to further track the signal transduction processes of IPA and uncover the function mechanism of IPA on crop productions. In this paper, a tunable and nontoxic fluorescent probe for IPA receptors was designed and synthetized base on carbon dots (C dots). Firstly carboxyl-modified carbon dots were prepared by high temperature cracking of citric acid. The fluorescence emission wavelengths of C dots varied with the excitation wavelengths change. Then IPA-modified carbon dots (IPA-C dots) were prepared by coupling the amino of tryptophan with the carboxyl of as-prepared carbon dots. Compared with C dots, the fluorescence intensity of IPA-C dots was double and the fluorescence stability was satisfactory under various conditions. This probe retained the biological activity of IPA and acted as target recognition of IPA receptors in plant tissues. The probe could avoid green fluorescence background of plants. The imaging results showed that the IPA receptors mainly existed on the membrane of stele. The toxicity test indicated the probe was less toxic than traditional inorganic semiconductor quantum dots.