Search

The development of high-performance nonprecious metal catalysts for oxygen reduction reactions is critical for the commercialization of fuel cells. In this paper, we report a non-precious catalyst with high-performance, in which Fe and Fe3C is embedded in nitrogen-doped carbon nanofibers (MIL-N-CNFs) by co-electrospinning Fe-MIL and polyacrylonitrile (PAN) and pyrolyzing. The mass ratio of Fe-MIL to PAN in the precursors and the pyrolysis temperature were optimized to be 1.5 and treated at 800 °C, respectively. The optimized catalyst exhibited an onset potential of 0.950 V and a half-wave potential of 0.830 V in alkaline electrolytes, thanks to the improved mass transfer kinetics in a meso-porous structure and enhanced reaction kinetics by confined Fe and Fe3C particles. Additionally, the optimized catalyst showed a better methanol tolerance than the commercial 20 wt.% Pt/C, indicating a potential application in direct methanol fuel cells. Serving as the cathode in CCM, the anion-exchange membrane fuel cell reaches a power density of 192 mW cm−2 at 428 mA cm−2 and 80 °C.

The excessive use of synthetic nitrogen (N) fertilizers in rice (Oryza sativa L.) has resulted in high N loss, soil degradation, and environmental pollution in a changing climate. Soil biochar amendment is proposed as a climate change mitigation tool that supports carbon sequestration and reduces N losses and greenhouse gas (GHG) emissions from the soil. The current study evaluated the impact of four different rates of biochar (B) (C/B0-0 t ha−1, B1-20 t ha−1, B2-40 t ha−1, and B3-60 t ha−1) and two N levels (N1; low (270 kg N ha−1) and N2; high (360 kg N ha−1)), on rice (cultivar Zhenguiai) grown in pots. Significant increases in the average soil microbial biomass N (SMBN) (88%) and carbon (87%) were recorded at the highest rate of 60-ton ha−1B and 360 kg N ha−1 compared to the control (N1C) during both seasons (S1 and S2). The photochemical efficiency (Fv/Fm), quantum yield of the photosystem (PS) II (ΦPS II), electron transport rate (ETR), and photochemical quenching (qP) were enhanced at low rates of biochar applications (20 to 40 t B ha−1) for high and low N rates across the seasons. Nitrate reductase (NR), glutamine synthetase (GS), and glutamine 2-oxoglutarate aminotransferase (GOGAT) activity were, on average, 39%, 55%, and 63% higher in the N1B3, N2B2, and N2B3 treatments, respectively than the N1C. The grain quality was higher in the N1B3 treatment than the N1C, i.e., the protein content (PC), amylose content (AC), percent brown rice (BRP), and percent milled rice (MRP) were, on average, 16%, 28%, 4.6%, and 5% higher, respectively in both seasons. The results of this study indicated that biochar addition to the soil in combination with N fertilizers increased the dry matter (DM) content, N uptake, and grain yield of rice by 24%, 27%, and 64%, respectively, compared to the N1C.

Abstract Biochar and inorganic fertilizer when co‐applied have been reported to increase crop yield and enhance soil fertility. However, studies on this complementary effect on soil properties and noodle rice performance in China are still scanty. To investigate the effects of biochar application coupled with inorganic fertilizers on soil sustainability and yield and yield attributes of noodle rice, outdoor pot experiments were conducted in the early and late growing seasons in 2018. The treatment combinations were T1 (B0 t/ha + N270 kg/ha), T2 (B20 t/ha + N270 kg/ha), T3 (B40 t/ha + N270 kg/ha), T4 (B60 t/ha + N270 kg/ha), T5 (B0 t/ha + N360 kg/ha), T6 (B20 t/ha + N360 kg/ha), T7 (B40 t/ha + N360 kg/ha), and T8 (B60 t/ha + N360 kg/ha). The results compiled across the seasons showed an increase in Pn (net photosynthetic rate), grain yield, N uptake, gel consistency, amylose content (AC), and protein content in biochar‐treated pots as compared to T1. Average increases of 63.24, 63.66, 14.85, 58.0, 59.0, 22.39, and 2.9% were observed in soil porosity, moisture content, pH, organic carbon, total nitrogen, available phosphorus, and available potassium in T4 over T1 across the seasons, respectively. Root morphological characteristics such as total root length, surface area, volume, and average root diameter were significantly improved in T3, T4, T7, and T8. Starch‐related enzymes such as starch branching enzyme (SBE), starch debranching enzyme (DBE), and soluble starch synthase (SSS) were not affected significantly; however, granule‐bound starch synthase (GBSS), ADP‐glucose pyrophosphorylase (ADPG), and starch synthesis (SS) enzyme showed higher activity in 40 and 60 t B/ha across N rates. Conclusively, biochar application of 60 t/ha along with 270 kg N/ha is a promising option for improving soil quality and increasing photosynthesis, yield, and yield attributes of noodle rice.

Thyroid follicular dendritic cell sarcoma (FDCS) is an extremely rare malignancy that originates from follicular dendritic cells of the germinal centers and is characterized by the neoplastic proliferation of spindled to ovoid cells. As there have been only five cases reported in the literature until now, the diagnostic and therapeutic information available to clinicians regarding thyroid FDCS is fairly limited. To our knowledge, this is the first case report of thyroid FDCS without a history of Hashimoto’s thyroiditis. A 48-year-old woman was found to have a slow-growing mass in the left thyroid. After total thyroidectomy and left modified radical neck dissection, the specimen demonstrated morphologic and immunohistochemical features of FDCS. The patient had a favorable prognosis with no evidence of disease 11 months after tumor excision.

The process of nanoemulsion was improved by optimizing the concentration of chitosan-N-acetylene-L-cysteine and sodium tripolyphosphate and the volume ratio between the two components. The prepared formulations were characterized in terms of particle size. Support vector regression (SVR) was built up and used to identify the parameters which could influence the particle size of the nanoemulsion. Data were divided into calibration and validation sets and then were modeled by SVR. It was found that the developed model was of high quality. This model was then used to explore the effect of composition and processing factors on the particle size of the nanoemulsion preparation. This study demonstrated that the SVR model may be used to optimize critical parameters to control preparation of this system and to obtain a dominant factor to control the final particle size.

To remove high oxygen content is important to make high quality oil and valuable products. In this paper, the research on homogeneous catalytic deoxygenation reactions, including decarboxylation (DCX)/decarbonylation (DCN), hydrodeoxygenation (HDO) is reviewed. Based on DCX/DCN, the classic radical reactions such as the Barton decarboxylation, Henkel, Hunsdiecker and Kochi reactions were introduced, the practice and overall performance are also discussed. In addition, the different reaction pathways and mechanisms were demonstrated and the key chemical processes have been selected from the literature as examples to elaborate the critical emphasis on the mechanistic understanding. The applications of the catalytic deoxygenation reactions for high-value products have also been highlighted. Overall, this review provides insight discussions on the DO issues and progresses in homogeneous catalytic aspects.

Urban expansion leads to surface changes that disrupt hydrological processes and increases flooding risks in cities. This increase may be severe in urban megaregions where clusters of cites have agglomerated. The China Ecological Redline Policy (ERP) is a national policy that protects priority areas with high-value ecosystem services. However, it is not clear how the ERP alters megaregion expansion and what this means for surface runoff across entire regions. By integrating specified models, we developed future urban expansion scenarios for 2030 with and without the ERP in the Chinese Beijing-Tianjin-Hebei (BTH) megaregion. The annual surface runoff volume under the ERP scenario decreased by 78 million m ^3 compared to the non-ERP involved scenario, but the ERP effectiveness at surface runoff regulation was different between the ecological redline areas (ERAs) and the non-ERAs. This suggested that multi-solutions should be incorporated into megaregions, such as regional ERPs and local, nature-based solutions, which could efficiently reduce the risk of urban flooding across whole regions.

This paper provides a solution for fast haptic information gain during soft tissue palpation using a Variable Lever Mechanism (VLM) probe. More specifically, we investigate the impact of stiffness variation of the probe to condition likelihood functions of the kinesthetic force and tactile sensors measurements during a palpation task for two sweeping directions. Using knowledge obtained from past probing trials or Finite Element (FE) simulations, we implemented this likelihood conditioning in an autonomous palpation control strategy. Based on a recursive Bayesian inferencing framework, this new control strategy adapts the sweeping direction and the stiffness of the probe to detect abnormal stiff inclusions in soft tissues. This original control strategy for compliant palpation probes shows a sub-millimeter accuracy for the 3D localization of the nodules in a soft tissue phantom as well as a 100% reliability detecting the existence of nodules in a soft phantom.

Excessive reliance on chemical fertilizer (CF) in conventional farming is a serious concern owing to its negative effects on soil health, the environment, and crop productivity. Organic manure is an alternative source of fertilizer to reduce the amount of CF usage in agriculture, decrease environmental pollution, and ensure sustainable crop production. This study assessed the integrated effect of poultry manure (PM) and cattle manure (CM) with CF on soil properties, plant physiology, and rice grain yield. Additionally, the difference in pre-and post-anthesis dry matter (DM) and nitrogen (N) accumulation and their relationship with grain yield was also determined. Pot experiments were performed in the early and late growing season at the experimental station of Guangxi University, China, in 2018. A total of six treatments, i.e., T1-CF0; T2-100% CF; T3-60% CM + 40% CF; T4-30% CM + 70% CF; T5-60% PM + 40% CF, and T6-30% PM + 70% CF were used in this pot experiment. Results showed that T6 enhanced leaf photosynthetic efficiency by 11% and 16%, chlorophyll content by 8% and 11%, panicle number by 12% and 16%, and grain yield by 11% and 15% in the early and late seasons, respectively, compared to T2. Similarly1, post-anthesis N and DM accumulation, N uptake, and soil properties (i.e., soil organic carbon, total N, and bulk density) were improved with integrated CF and manure treatments over the sole CF treatments. Interestingly, increases in post-anthesis N uptake and DM production were further supported by enhanced N-metabolizing enzyme activities (i.e., nitrate reductase, glutamine synthetase, and glutamate oxoglutarate aminotransferase during the grain-filling period in combined treatments. In-addition, the linear regression analysis showed that post-anthesis DM (R2 = 0.95) and N (R2 = 0.96) accumulation were highly associated with grain yield of rice. Thus, the combination of 30% N from PM or CM with 70% N from CF (i.e., urea) is a promising option for improvement of soil quality and rice grain yield. Furthermore, our study provides a sustainable nutrient management plan to increase rice yield with high N use efficiency.

Fibroepithelial polyps (FEPs) are a rare, benign disease in the urinary system. We present a clinical case of a 34-year-old woman with a symptomatic bladder tumor. Cystoscopy showed a mulberry-like mass with calcification in the bladder trigone. After transurethral resection, histopathology showed an FEP in the bladder with calcification and squamous cell metaplasia. The patient was discharged from hospital 3 days after surgery. We review the recent literature to summarize the clinical manifestations, treatments, and prognosis of bladder FEPs.

In hot and humid regions of southern China, the volumetric moisture content of the embankment after opening to traffic for a period of time reaches a stable state, and it is higher than the design value. When it was widened, the humidity gradient and exchange were formed due to the difference in moisture content between the existing and new embankment. To reveal the moisture migration of the existing and new embankment and control the rise of volumetric moisture content in new embankment, six frequency domain reflectometry sensors were installed in existing and new embankment to monitor the volumetric moisture content. A finite element model for the embankment was established and verified with the measured data. And seven numerical analyses of transient seepage in the new embankment of the cushion, cover, and partition using capillary barrier by sand were simulated. The results show that the volumetric moisture contents of the new embankment in southern China gradually increase and eventually reach an equilibrium state. The increase in water comes from the slope, the foundation, and the existing embankment. Early in the first 1∼2 years, the water mainly comes from the foundation and the existing embankment. After that, as time goes by, the water comes mostly from the slope infiltration and gradually migrates to the foundation and the existing embankment. Finally, the volumetric moisture content and the water storage gradually reach equilibrium. The volumetric moisture content of the new embankment using capillary barrier by sand at the cushion, the cover, and the partition is maintained as the construction volumetric moisture content. This combination is a very effective method to control the humidity stability of the new embankment in southern China.

Ageing treatments were performed on Ti-50.53 at.% Ni shape memory alloy corrugated gasket (SMA-CG) units. The results of phase transition temperature, shape-setting, compression-resilience performance, and the shape memory effect (SME) of NiTi corrugated units were investigated. The experimental results show that high austenite finish temperatures could be achieved at 500°C and at 400°C aged for a long time, while the martensite finish temperatures were basically above room temperature. The peak value of the austenite finish temperature was found to be 500°C. The shape-setting result was better with the increase of ageing temperature and ageing time. It was stable when units were constrain-treated at 500°C and the ageing time was longer than 30 min. As the strain increases, the resilience rate of the unit decreased rapidly. The resilience rate decreased with the ageing process. Most of the aged units exhibited good SME when the maximum strain was less than 40%. There was the best recoverability when the ageing treatment was performed at 500°C for 60 min.

Abstract Introduction Apolipoprotein E (APOE) ε2 and ε4 alleles encoded by rs7412 and rs429358 polymorphisms, respectively, are landmark contra and pro “risk” factors for Alzheimer's disease (AD). Methods We examined differences in linkage disequilibrium (LD) structures between (1) AD‐affected and unaffected subjects and (2) older AD‐unaffected and younger subjects in the 19q13.3 region harboring rs7412 and rs429358. Results AD is associated with sex‐nonspecific heterogeneous patterns of decreased and increased LD of rs7412 and rs429358, respectively, with other polymorphisms from five genes in this region in AD‐affected subjects. The LD patterns in older AD‐unaffected subjects resembled those in younger individuals. Polarization of the ε4‐ and ε2 allele–related heterogeneous LD clusters differentiated cell types and implicated specific tissues in AD pathogenesis. Discussion Protection and predisposition to AD is characterized by an interplay of rs7412 and rs429358, with multiple polymorphisms in the 19q13.3 region in a tissue‐specific manner, which is not driven by common evolutionary forces.

Abstract Introduction As a multifactorial polygenic disorder, Alzheimer's disease (AD) can be associated with complex haplotypes or compound genotypes. Methods We examined associations of 4960 single nucleotide polymorphism (SNP) triples, comprising 32 SNPs from five genes in the apolipoprotein E gene (APOE) region with AD in a sample of 2789 AD‐affected and 16,334 unaffected subjects. Results We identified a large number of 1127 AD‐associated triples, comprising SNPs from all five genes, in support of definitive roles of complex haplotypes in predisposition to AD. These haplotypes may not include the APOE ε4 and ε2 alleles. For triples with rs429358 or rs7412, which encode these alleles, AD is characterized mainly by strengthening connections of the ε4 allele and weakening connections of the ε2 allele with the other alleles in this region. Discussion Dissecting heterogeneity attributed to AD‐associated complex haplotypes in the APOE region will target more homogeneous polygenic profiles of people at high risk of AD.

We, the authors, wish to make the following corrections to our paper [...]

We reveal a divergent issue associated with the mean-field theory for Bose gases in optical lattices constructed by the widely used straightforward mean-field decoupling of the hopping term, where the corresponding mean-field Hamiltonian generally assumes no lower energy bound once the spatial dependence of the mean-field superfluid (SF) order parameter is taken into account. Via a systematic functional integral approach, we solve this issue by establishing a general finite temperature mean-field theory that can treat any possible spatial dependence of the order parameter without causing the divergent issue. Interestingly, we find the theory generally assumes an intrinsic non-Hermitian structure that originates from the indefiniteness of the hopping matrix of the system. Within this theory, we develop an efficient approach for investigating the physics of the system at finite temperature, where properties of the system can be calculated via straightforward investigation on the saddle points of an effective potential function for the order parameter. We illustrate our approach by investigating the finite temperature SF transition of Bose gases in optical lattices. Since the underlying finite temperature mean-field theory is quite general, this approach can be straightforwardly applied to investigate the finite temperature properties of related systems with phases possessing complex spatial structures.

Although urban agglomerations are vital sites for national economic development, comprehensive multidimensional investigations of their performance are lacking. Accordingly, we examined land use efficiency from multiple perspectives in two of the earliest developed and most advanced urban agglomerations in China, the Beijing–Tianjin–Hebei (BTH) region and the Yangtze River Delta (YRD), using different metrics, including trans-regional drivers of the spatial allocation of construction land. We found that: (1) The land use efficiency of urban agglomerations was context dependent. Whereas it was higher in the Beijing–Tianjin–Hebei region for population density per unit area of construction land than in the Yangtze River Delta region, the opposite was true for gross domestic production. Thus, a single aspect did not fully reflect the land use efficiency of urban agglomerations. (2) The land use efficiency of the two urban agglomerations was also scale dependent, and in the Yangtze River Delta region, the use of multiple metrics induced variations between aggregate and local measures. Median values for the land use efficiency of cities within an urban agglomeration were the most representative for comparative purposes. (3) The drivers of the spatial allocation of construction land were trans-regional. At the regional scale, most topographical factors were restrictive. Major regional transport networks significantly influenced the occurrence of construction land near them. Dominant cities and urban areas within each city exerted remote effects on non-dominant cities and rural areas. In principle, the median value can be considered a promising metric for assessing an urban agglomeration’s performance. We suggest that stringent management of land use in areas located along regional rail tracks/roadways may promote sustainable land use.

It is well known that the effect of shale hydration causes wellbore instability due to water phase invasion of drilling fluid to lamellar shale rich formations. This is because of that the mechanical properties (compressive strength, elastic modulus, etc.) of lamellar shale surrounding the borehole, which is rich in clay minerals, will decrease significantly after hydration. In this study, using the lamellar shale in the continental stratum of the southern Ordos Basin, the mechanical properties of lamellar shale were studied by compression tests considering the effect of lamellar structure and hydration from a macroscopic point of view. In addition, the mechanical mechanism was discussed combined with the CT scanning tests results from a microscopic point of view. The results demonstrate the following points. Lamellar shale has stronger anisotropy than bedding shale, the compressive strength (deviatoric stress) and elastic modulus of lamellar shale are both lower than those of bedding shale, and it is more prone to tension fracture. With the increase in the angle (β) between the lamina and the axial direction from 0° to 90°, the compressive strength of lamellar shale decreases when β < 30° and then increases, the elastic modulus of lamellar shale decreases greatly when β < 30° and then tends to flatten. With the increase in hydration time, the compressive strength and elastic modulus of lamellar shale both gradually decrease, and the rates of their decrements reduce. The mechanical properties of lamellar shale are more affected by hydration than those of bedding shale. The hydration of lamellar shale leads to the formation of new fractures and the expansion of existing fractures in the junction area between the laminae and rock matrix, resulting in easy tension fracture along the laminae of shale.

Millions of enhancers are predicted, but their validation remains challenging. Here, the authors report genome-wide enhancer function quantification and high-resolution dissection for millions of accessible DNA fragments, revealing driver nucleotides and helping interpret non-coding disease variants.

Whether the quantum Griffiths singularity state exists in one-dimensional (1D) systems remains elusive. Here, Zhang et al. report violation of the Pauli limit in the superconducting critical field and multiple phase transitions in the current-voltage hysteresis loops in a Ta2PdS5 nanowire, suggesting signatures of quasi-1D quantum Griffith singularity.

Abstract Background ALOG (Arabidopsis LSH1 and Oryza G1) family with a conserved domain widely exists in plants. A handful of ALOG members have been functionally characterized, suggesting their roles as key developmental regulators. However, the evolutionary scenario of this gene family during the diversification of plant species remains largely unclear. Methods Here, we isolated seven ALOG genes from Torenia fournieri and phylogenetically analyzed them with different ALOG members from representative plants in major taxonomic clades. We further examined their gene expression patterns by RT-PCR, and regarding the protein subcellular localization, we co-expressed the candidates with a nuclear marker. Finally, we explored the functional diversification of two ALOG members, TfALOG1 in euALOG1 and TfALOG2 in euALOG4 sub-clades by obtaining the transgenic T. fournieri plants. Results The ALOG gene family can be divided into different lineages, indicating that extensive duplication events occurred within eudicots, grasses and bryophytes, respectively. In T. fournieri, seven TfALOG genes from four sub-clades exhibit distinct expression patterns. TfALOG1–6 YFP-fused proteins were accumulated in the nuclear region, while TfALOG7-YFP was localized both in nuclear and cytoplasm, suggesting potentially functional diversification. In the 35S:TfALOG1 transgenic lines, normal development of petal epidermal cells was disrupted, accompanied with changes in the expression of MIXTA-like genes. In 35S:TfALOG2 transgenic lines, the leaf mesophyll cells development was abnormal, favoring functional differences between the two homologous proteins. Unfortunately, we failed to observe any phenotypical changes in the TfALOG1 knock-out mutants, which might be due to functional redundancy as the case in Arabidopsis. Conclusion Our results unraveled the evolutionary history of ALOG gene family, supporting the idea that changes occurred in the cis regulatory and/or nonconserved coding regions of ALOG genes may result in new functions during the establishment of plant architecture.

AIM:To investigate the operation opportunity and therapeutic effect of intermittent exotropia. METHODS: A prospective study of 139 patients with intermittent exotropia admitted to our hospital from May 2014 to December 2016 was conducted. Patients were divided into three groups according to their ages: Group A with 58 cases aged between 3 and 7 years old, Group B with 41 cases aged from 8 to 12 years old and Group C with 40 cases aged more than 12 years old. The therapeutic effect of each group was observed. RESULTS: The postoperative orthographic rate between the three groups at 3d, 1, 3 and 6mo postoperatively had statistical differences(PPPPPP>0.05), while the degree of strabismus in each group after 6mo was significantly different(P△ in Group A was higher than the other two groups(PPPP>0.05). There was a statistically significant difference in the incidence of ocular regression rate in three groups during the 6mo follow-up(PPPCONCLUSION: The surgical type of the intermittent exotropia should be based on the classification of strabismus, which can promote postoperative recovery of the eye position and visual function, improve visual acuity, and then avoid ocular regresses.

Abstract Heterostructures based on two-dimensional (2D) materials have sparked wide interests in both fundamental physics and applied devices. Recently, Dirac/Weyl semimetals are emerging as capable functional materials for optoelectronic devices. However, thus far the interfacial coupling of an all-semimetal 2D heterostructure has not been investigated, and its effects on optoelectronic properties remain less well understood. Here, a heterostructure comprising of all semi-metallic constituents, namely graphene and WTe2, is fabricated. Standard photocurrent measurements on a graphene/WTe2 phototransistor reveal a pronounced photocurrent enhancement (a photoresponsivity ~8.7 A/W under 650 nm laser illumination). Transport and photocurrent mapping suggest that both photovoltaic and photothermoelectric effects contribute to the enhanced photoresponse of the hybrid system. Our results help to enrich the understanding of new and emerging device concepts based on 2D layered materials.

Abstract Background Vitamin D (VD) insufficiency or deficiency is a frequent comorbidity in Chinese women with postmenopausal osteoporosis (PMO). The present study aimed to investigate 25-hydroxyvitamin D [25(OH) D] improvement and calcium-phosphate metabolism in Chinese PMO patients treated with 70 mg of alendronate sodium and 5600 IU of vitamin D3 (ALN/D5600). Methods Chinese PMO women (n = 219) were treated with 12-month ALN/D5600 (n = 111) or calcitriol (n = 108). Changes in 25(OH) D at month 12 were post hoc analyzed by the baseline 25 (OH) D status using the longitudinal analysis. The main safety outcome measures included serum calcium and phosphate and 24-h urine calcium, and the repeated measures mixed model was used to assess the frequencies of the calcium-phosphate metabolic disorders. Results Absolute change in mean serum 25(OH) D level was the greatest in VD-deficient patients and least in VD-sufficient patients at months six and 12 (both, P

Background/Aims: Platinum-based chemotherapy is one of the most important strategies for treatment of colorectal cancer. To improve the therapeutic efficiency, adjuvant drugs were sought to sensitize colorectal cancer cells to platinum-based agents such as cisplatin. As previous research has shown that miRNAs are associated with chemosensitivity, we aimed to alter miRNA regulation in colorectal cancer cells to increase their chemosensitivity. Methods: MTT assays were performed to determine the viability of HT29, SW480, and LoVo cells. Quantitative real time polymerase chain reaction (qRT-PCR) was performed to examine the expression of miR-20a in these cell lines. Regulation of the miR-20a/ASK1 axis was confirmed by western blotting and luciferase reporter assays. After treatment with miR-20a inhibitor (anti-miR-20a) and cisplatin, production of reactive oxygen species (ROS), mitochondrial membrane potential, and apoptosis were measured by flow cytometry. Activation of ASK1, Bcl-xl, JNK, and caspase-9, -7, and -3 was detected by western blotting. Results: miR-20a was overexpressed in colorectal cancer cell lines. Furthermore, knockdown of miR-20a increased the sensitivity of colorectal cancer cells to cisplatin treatment in vitro and in vivo. We demonstrated that the ASK1 gene was the target of miR-20a, and knockdown of miR-20a increased the expression of ASK1 in colorectal cancer cells. As cisplatin treatment induced production of ROS, knockdown of miR-20a enhanced ROS signaling through promoting the phosphorylation of ASK1. Phosphorylation of JNK and the subsequent mitochondrial apoptosis were triggered by the combination of cisplatin and anti-miR-20a. Conclusions: Knockdown of miR-20a enhanced sensitivity of colorectal cancer cells to cisplatin through the ROS/ASK1/JNK pathway.

Abstract Background Pyrolysis has attracted growing interest as a versatile means to convert biomass into valuable products. Wheat straw has been considered to be a promising biomass resource due to its low price and easy availability. However, most of the products obtained from wheat straw pyrolysis are usually of low quality. Hot soda extraction has the advantage of selective dissolution of lignin whilst retaining the carbohydrates. This can selectively convert biomass into high-quality desired products and suppress the formation of undesirable products. The aim of this study was to investigate the pyrolysis properties of wheat straw under different hot caustic pretreatment conditions. Results Compared with the untreated straw, a greater amount of gas was released and fewer residues were retained in the extracted wheat straw, which was caused by an increase in porosity. When the NaOH loading was 14%, the average pore size of the extracted straw increased by 12% and the cumulative pore volume increased by 157% compared with the untreated straw. The extracted straw obtained from the 14% NaOH extraction was clearly selective for pyrolysis products. On one hand, many lignin pyrolysis products disappeared, and only four main lignin-unit-pyrolysis products were retained. On the other hand, polysaccharide pyrolysis products were enriched. Both propanone and furfural have outstanding peak intensities that could account for approximately 30% of the total pyrolysis products. However, with the excessive addition of NaOH (i.e. > 22% w/w) during pretreatment, the conversion of bio-gas products decreased. Thermogravimetric and low-temperature nitrogen-adsorption analysis showed that the pore structure had been seriously destroyed, leading to the closing of the release paths of the bio-gas and thus increasing the re-polymerisation of small bio-gas molecules. Conclusions After suitable extraction (14% NaOH loading extraction), a considerable amount (25%) of the soluble components dissolved out of the straw. This resulted in an increase in both pore size and volume. This condition appeared to be optimally selective for the release of value-added pyrolysis products such as furfural, ketones and lignin monomer units. However, excessive addition of alkali (22%) for extraction could change the original interior structure, resulting in a decrease in both pore size and volume. This interior structure modification limited the release of pyrolysis products, and greater carbonisation occurred.

The task of unsupervised anomalous sound detection (ASD) is challenging for detecting anomalous sounds from a large audio database without any annotated anomalous training data. Many unsupervised methods were proposed, but previous works have confirmed that the classification-based models far exceeds the unsupervised models in ASD. In this paper, we adopt two classification-based anomaly detection models: (1) Outlier classifier is to distinguish anomalous sounds or outliers from the normal; (2) ID classifier identifies anomalies using both the confidence of classification and the similarity of hidden embeddings. We conduct experiments in task 2 of DCASE 2020 challenge, and our ensemble method achieves an averaged area under the curve (AUC) of 95.82% and averaged partial AUC (pAUC) of 92.32%, which outperforms the state-of-the-art models.

All human activity is associated with the generation of electrical signals. These signals are collectively referred to as electrical physiology (EP) signals (e.g., electrocardiogram, electroencephalogram, electromyography, electrooculography, etc.), which can be recorded by electrodes. EP electrodes are not only widely used in the study of primary diseases and clinical practice, but also have potential applications in wearable electronics, human–computer interface, and intelligent robots. Various technologies are required to achieve such goals. Among these technologies, adhesion and stretchable electrode technology is a key component for rapid development of high-performance sensors. In last decade, remarkable efforts have been made in the development of flexible and high-adhesive EP recording systems and preparation technologies. Regarding these advancements, this review outlines the design strategies and related materials for flexible and adhesive EP electrodes, and briefly summarizes their related manufacturing techniques.

Turbine blades in aircraft engines may encounter overheating and suffer serious creep property degradation. In this study, the thermal cycling creep experiments were conducted on K465 superalloy under (900 °C/30 min–1100 °C/3 min)/50 MPa, (900 °C/30 min–1150 °C/3 min)/50 MPa and (1000 °C/30 min–1150 °C/3 min)/50 MPa. The investigated thermal cycling creep properties were dramatically degraded, and increasing the overheating temperatures significantly decreased the thermal cycling creep life. The secondary γ′ precipitates obviously dissolved and the area fraction decreased to around 35.2% under (900 °C/30 min–1150 °C/3 min)/50 MPa and (1000 °C/30 min–1150 °C/3 min)/50 MPa, which was almost half that after the standard solution treatment. The decline of the thermal cycling creep properties was mainly due to the significant dissolution of γ′ precipitates. The creep holes/cracks were mainly distributed at the M6C carbides and γ/γ′ eutectics interfaces, M6C carbides and γ′ film interfaces in the grain boundaries, and resulted in the final intergranular fracture.

Bone tissue engineering (BTE) is an optimized approach for bone regeneration to overcome the disadvantages of lacking donors. Biocompatibility, biodegradability, simulation of extracellular matrix (ECM), and excellent mechanical properties are essential characteristics of BTE scaffold, sometimes including drug loading capacity. Electrospinning is a simple technique to prepare fibrous scaffolds because of its efficiency, adaptability, and flexible preparation of electrospinning solution. Recent studies about electrospinning in BTE are summarized in this review. First, we summarized various types of polymers used in electrospinning and methods of electrospinning in recent work. Then, we divided them into three parts according to their main role in BTE, (1) ECM simulation, (2) mechanical support, and (3) drug delivery system.

Gas insulated switchgear equipment (GIS) is widely used in power system, and more attention has been paid to discharge defects than mechanical defects. However, since mechanical defects are a major cause of the failure in GIS, it is of great significance to carry out relevant research on mechanical defects. Detection and diagnosis methods of mechanical defects based on vibration signal are studied in this paper. Firstly, vibration mechanisms of GIS are analyzed. Due to structural differences between single phase insulated type GIS and three phase insulated type GIS, there are big differences in vibration mechanisms between the two types of GISs. Secondly, experimental research on mechanical defects is carried out based on a 110 kV GIS equipment and a self-developed vibration detection system; results show that mechanical defects can be diagnosed by analyzing signal amplitude, frequency spectrum and waveform distortion rate, and a large current is more beneficial for diagnosing mechanical defects. Lastly, field application has been carried out on 220 kV GIS equipment, and a poor contact defect is found, demonstrating that abnormal diagnosis can be realized by method proposed in this paper. Experimental research and field application demonstrate the feasibility and effectiveness of detection and diagnosis method for mechanical defects based on vibration signal and provide experience for subsequent engineering application.

In real reflexive Banach spaces, let the GSTDHVI, SHVI, DVIP, VIT, and KKM represent a generalized system of time-dependent hemivariational inequalities, a system of hemivariational inequalities, a derived vector inclusion problem, Volterra integral term, and Knaster–Kuratowski–Mazurkiewicz, respectively, where the GSTDHVI consists of two parts which are of symmetric structure mutually. By virtue of the surjectivity theorem for pseudo-monotonicity mappings and the Banach contraction mapping principle, instead of the KKM theorems exploited by other authors in recent literature for a SHVI, we consider and study a GSTDHVI with VITs. Under quite mild assumptions, it is shown that there exists only a solution to the investigated problem via demonstrating that a DVIP with VIT is solvable.

Transient voltage generated in ultra-high voltage (UHV) transmission system has a severe impact on the insulation state of gas-insulated transmission lines (GIL). In order to monitor the transient voltage process occurring in UHV GIL during operation, this paper constructs a transient voltage ultra-wideband (UWB) online monitoring system based on capacitive voltage division. This system has been applied in an 1100 kilovolt (kV) GIL utility tunnel project. It can be used to analyze the characteristics of the recorded transient voltage waveforms for distinguishing different types of insulation failure. In this paper, through the case studies in time domain and time–frequency domain, the case of SF6 gap breakdown and that of post insulator flashover have differentiated characteristics in instantaneous frequency. Additionally, a case of secondary discharge is successfully estimated through the time–frequency distribution of the transient voltage. In order to find the malfunctioning chamber of GIL rapidly, a two-terminal TW-based fault location method based on this monitoring system is developed in this paper. The case study validates the locating accuracy which directly support for shortening the maintenance time of GIL.

The distributed attitude synchronization control problem for spacecraft formation flying subject to limited energy and computational resources is addressed based on event-triggered mechanism. Firstly, a distributed event-driven controller is designed to achieve attitude coordination with the limitation of energy and computing resources. Under the proposed control strategy, the controller is only updated at the event triggering instants, which effectively reduces the update frequency. Subsequently, an event-triggered strategy is developed to further decrease energy consumption and the amount of computation. The proposed event-triggered function only requires the latest state information about its neighbors, implying that the trigger threshold does not need to be calculated continuously. It is shown that the triggering interval between two successive events is strictly positive, showing that the control system has no Zeno phenomenon. Moreover, the update frequency of the proposed controller can be reduced by more than 90% compared to the update frequency of the corresponding time-driven controller with an update frequency of 10 Hz by choosing appropriate control parameters and the control system can still achieve high-precision convergence. Finally, the effectiveness of the constructed control scheme is verified by numerical simulations.

Abstract: Chronic myelomonocytic leukemia (CMML) is a clonal hematopoietic stem cell disorder that typically associates with mutations in epigenetic, splicing, and signaling genes. Genetically modified mouse models only partially recapitulate the disease phenotype, whereas xenotransplantation of CMML cells in immunocompromised mice has been rarely successful so far. Here, CMML CD34+ cells sorted from patient bone marrow (BM) or peripheral blood (PB) were injected intravenously into NSG (NOD/LtSz-scid IL2rγnull) mice and NSG mice engineered to express human granulo-monocyte colony-stimulating factor, stem cell factor, and interleukin-3 (NSGS mice). Fifteen out of 16 patient samples (94%) successfully engrafted into NSG or NSGS or both mouse strains. The expansion of human cells, predominant in the BM, was also observed in the spleen and the PB and was greatly enhanced in mice producing the 3 human cytokines. Gene mutations identified in engrafted cells were mostly similar to those identified in patient cells before injection. Successful secondary engraftment was obtained in NSGS mice in 3 out of 10 attempts. Thus, primary CMML leukemic cells expand much better in NSGS compared with NSG mice with limited efficacy of secondary transplant.

Abstract Background Primary peritoneal papillary serous carcinoma (PPPSC) is an uncommon disease which has a high malignancy and a poor prognosis. Case presentation We report here a long-term survival case of PPPSC with postoperative lung metastasis. A 62-year-old female patient with PPPSC was administered two cycles of neoadjuvant chemotherapy (NAC) followed by cytoreductive surgery (CRS) plus hyperthermic intraperitoneal chemotherapy (HIPEC) and six cycles of platinum-based (docetaxel + carboplatin) intraperitoneal chemotherapy postoperatively. The patient reached a complete remission at the completion of primary treatment. Malignant thoracic effusion and lung metastasis developed 5 months after the treatment. The patient underwent video-assisted thoracoscopic surgery plus hyperthermic intrapleural chemotherapy. Conclusions Up to present, the patient has been survived with tumor for over 86 months with a good performance status, with only encapsulated effusion found at the latest follow-up. As a relatively new regime, the application of CRS + HIPEC in our patient has been proved example for MPE management, although more large-scale studies are needed to substantiate its efficiency and safety.

Mid-infrared pulsed sources are technologically important for sensing and spectroscopy but their implementation is challenging due to the lack of a tuneable optical switch. Here, the authors address this limitation by engineering the band structure of an emerging Dirac semimetal, Cd3As2.

This study aimed to identify the roles of the long non-coding RNA LINC00114 in colorectal cancer (CRC) development. The expression levels of LINC00114 and miR-133b in CRC were determined by reverse transcription (RT)-polymerase chain reaction (PCR) and the functions of LINC00114 in CRC were evaluated in vitro and in vivo. Methylation-specific PCR assay was performed to detect the miR-133b promoter methylation in CRC cells. Bioinformatics analysis, RNA immunoprecipitation, dual luciferase assay, RNA pull-down, co-immunoprecipitation (IP), and chromatin IP (ChIP) assays were used to elucidate whether LINC00114 could recruit EZH2/DNMT1 and bind to the miR-133b promoter region, leading to dysregulated methylation and the depression of miR-133b. The expression levels of DNA methyltransferases (DNMTs), EZH2, and nucleoporin 214(NUP214) were analyzed by western blotting. Data showed that LINC00114 was highly expressed, whereas miR-133b was downregulated in the CRC tissues and cells. In vitro, silencing LINC00114 inhibited cell proliferation and impeded cell cycle at the G1/S phase by upregulating miR-133b. In vivo, LINC00114 knockdown reduced tumor growth. Further analysis showed that the methylation in miR-133b promoter region was increased in the CRC and silencing LINC00114 increased miR-133b expression through depressing methylation of its promoter region. ChIP-PCR experiments demonstrated that EZH2 and DNMT1 could bind to the miR-133b promoter region and it was abolished by LINC00114 knockdown. sh-EZH2 reversed the overexpression of DNMTs and CRC cell cycle progression induced by the LINC00114 upregulation. LINC00114 could regulate the NUP214 protein expression by sponging miR-133b. These results demonstrated that LINC00114 suppressed miR-133b expression via EZH2/DNMT1-mediated methylation of its promoter region, indicating that LINC00114 might be a potential novel target for CRC diagnosis and treatment.

A muscular synergy is a theory suggesting that the central nervous system uses few commands to activate a group of muscles to produce a given movement. Here, we investigate how a muscle synergy extracted from a single muscle can be at the origin of different signals which could facilitate the control of modern upper limb myoelectric prostheses with many degrees of freedom. Five pairs of surface electrodes were positioned across the biceps of 12 normal subjects and electromyographic (EMG) signals were collected while their upper limbs were in eight different static postures. Those signals were used to move, within a virtual cube, a small red sphere toward different targets. With three muscular synergies extracted from the five EMG signals, a classifier was trained to identify which synergy pattern was associated with a given static posture. Later, when a posture was recognized, the result was a displacement of a red sphere toward a corner of a virtual cube presented on a computer screen. The axes of the cube were assigned to the shoulder, elbow and wrist joint while each of its the corners was associated with a static posture. The goal for subjects was to reach, one at a time, the four targets positioned at different locations and heights in the virtual cube with different sequences of postures. The results of 12 normal subjects indicate that with the muscular synergies of the biceps brachii, it was possible, but not easy for an untrained person, to reach a target on each trial. Thus, as a proof of concept, we show that features of the biceps muscular synergy have the potential to facilitate the control of upper limb myoelectric prostheses. To our knowledge, this has never been shown before.

In this paper, we reported a ZnO quantum dot (QD) based nano drug delivery system by surface modification of hydrophilic copolymer poly(methacrylate-co-N-isopropylacrylamide-co-polyethylene glycol methyl acrylate) (ZnO@PMNE) that was synthesized by the one step copolymerization method. The ZnO@PMNE nanoparticles (ZnO@PMNE NPs) have excellent stability and photoluminescence performance in water. Moreover, it is temperature responsive and biodegradable in an acid microenvironment. ZnO@PMNE NPs loaded with doxorubicin (DOX) will degrade to zinc ions (Zn2+) and DOX at an acidic tumor microenvironment. Moreover, the cytotoxicity of cancer cells was significantly increased because the ZnO QDs exhibited cytotoxicity postdissolution compared to normal cells, which will achieve a synergistic antitumor effect to improve the therapeutic index.

In recent years, as an increasing number of neuronal autoantibodies have been detected and used for clinical diagnosis, clinicians have become more aware of autoimmune encephalitis, causing its reported incidence to trend upward over several years. To date, however, there has been no large-scale epidemiological survey of autoimmune encephalitis in adults and children, and its epidemiological characteristics remain unclear. Six main types of antibodies are detected and used to diagnose autoimmune encephalitis in Chongqing, Southwestern China: anti-NMDA receptor antibody, anti-GABAB receptor antibody, anti-LGI1 antibody, anti-CASPR2 antibody, anti-AMPA1 receptor antibody, and anti-AMPA2 receptor antibody. From January 2012 to February 2018, 189 patients at six general hospitals in Chongqing were diagnosed with autoimmune encephalitis and were positive for neuronal autoantibodies. In this report, the epidemic situation and the antibody distribution among these patients are analyzed and described in detail. The differences in disease severity among different ages and between the sexes are evaluated, and the correlation between antibody titer and disease severity is also assessed.

The effective fault diagnosis of the motor bearings not only can ensure the smooth and efficient operation of equipment but also can detect and eliminate the running fault in time to prevent major accidents. Based on deep learning algorithm, this article constructs a stacked auto-encoder network. The input data are compressed and reduced by introducing sparsity constraint, so that the network can accurately extract the fault characteristics of the input data, and the fault recognition ability of the network can be improved by introducing random noise. The simulation result shows that the stacked auto-encoder network can not only overcome the shortcomings of traditional fault diagnosis method that requires to distinguish fault samples manually and needs a large number of prior knowledge but also realize the self-learning of fault signal feature. The accuracy rate of fault identification reaches 98%, 94%, 96%, and 95.5% in four different working conditions. What’s more, the network can exhibit strong robustness under different working conditions. Finally, the new research ideas of fault diagnosis in thermal power plant are put forward by copying the idea of fault diagnosis of motor bearing.

Single crystalline Co2FeAl films with different thicknesses varying from 3.6 to 10.6 nm have been grown on GaAs (001) using Molecule Beam Epitaxy (MBE). The magnetic characteristics were investigated by in-situ magneto-optical Kerr effect (MOKE). For all the samples, the angle dependent magnetization energy has a relatively high and steep peak around [110] direction which is the hard axis, and a wide basin from [11¯0] to [100] which is the range of the easy axis. More interestingly, the magnetic anisotropy includes a strong uniaxial component due to the Co2FeAl/GaAs interface, a cubic one from Co2FeAl crystalline structure, and an unexpected localized anisotropy term around the [110] direction. All the three anisotropy components overlap their own hard axis around [110] direction resulting in a steep energy barrier, which leads to unusual inverted hysteresis loops around [110]. Our findings add a building block for using half-metallic Co2FeAl thin films in the application of magnetic storage devices.

Light is a major limiting resource in aquatic ecosystems and numerous studies have investigated the response of submerged macrophytes to low light conditions. However, few studies have tested whether different light response strategies can also have consequences for macrophyte distribution along different littoral slopes in lakes, which are known to affect macrophyte biomass due to differences in drag forces and sediment characteristic. In this study, we tested (1) whether two macrophyte species of different growth forms (canopy-forming: Potamogeton maackianus, rosette-type: Vallisneria natans) differ in their response strategies to low light conditions and (2) how these responses influence their distribution along different basin slopes in the mesotrophic Lake Erhai, China. We hypothesized that the canopy-forming species responds to low light conditions at deeper sites by stem elongation while the rosette-type species increases its shoot chlorophyll content. As a consequence, P. maackianus should have a higher susceptibility to drag forces and thus prevail at sites with lower slopes. Sites with higher slopes should offer a niche for rosette-type species like V. natans that can better withstand drag forces. We surveyed the distribution and abundance of the two macrophyte species at 527 sampling points along 97 transects in Lake Erhai and measured their height, leaf and stem/rhizome biomass, and leaf chlorophyll a content at different water depths. Our results confirmed stem elongation as a strategy to low light conditions by the canopy-forming species P. maackianus, while V. natans produced more chlorophyll a per shoot biomass at deeper sites to tolerate shading. As hypothesized, these alternative response strategies to low light conditions resulted in a trade-off regarding the plants ability to grow at different basin slopes. P. maackianus was dominant at sites with low-moderate slope (0–4%) and low-moderate water depth (2–4 m), while sites with high basin slope (4–7%) combined with moderate-high water depth (3–5 m) were dominantly colonized by V. natans. The latter habitat thus represents a potential refuge for rosette-type macrophyte species that are often outcompeted when shading increases during eutrophication.

High purity γ-phase InSe single crystals have been synthesized and characterized by XRD, SEM, EDS and TEM. Detailed temperature dependent Raman and photoluminescence spectroscopy suggests a small blue-shift as temperature decreases. The corresponding blue shift in Raman and photoluminescence can be explained in terms of self-energy and the lattice parameter change induced variation of band gap, respectively. Moreover, bulk InSe exhibits photoresponsivity in a wide spectrum from 400 to 990 nm. The maximum photoresponsivity reaches up to 8.82 mA/W under the wavelength of 800 nm, which is consistent with high absorption at the wavelength.

TGF-β receptors play important roles in mediating TGF-β signals during gonadal development. To identify the functions of TGF-β receptors, including the type I receptor (activin receptor-like kinase 5, ALK5) and type II receptor (bone morphogenetic protein receptor 2, BMPR2), during the gonadal development of S. prenanti, the full-length cDNA sequences of ALK5 and BMPR2 were isolated and characterized. Their expression patterns in developing gonads and in the gonads of exogenous estradiol (E2) -fed fish were analyzed. The cDNAs of ALK5 and BMPR2 were 1925 bp and 3704 bp in length and encoded 501 and 1070 amino acid residues, respectively. ALK5 and BMPR2 were mostly expressed in gonads, particularly in cortical alveoli stage ovaries and mid-spermatogenic stage testes; however, the overall level of BMPR2 mRNA was higher than that of ALK5 during gonadal development. Furthermore, immunohistochemical signals of ALK5 and BMPR2 were mostly detected at chromatin nucleolar oocytes and perinuclear oocytes in ovaries and at spermatocytes and spermatogonia in testes. Exogenous E2 induces the gonadal expression of ALK5 and BMPR2, and BMPR2 is more responsive to E2 than ALK5. These results suggest that ALK5 and BMPR2 might play a potentially vital role in both folliculogenesis and spermatogenesis in S. prenanti.

The properties of lithium ion battery largely depend on the structure of active materials. In the present work, CoFe _2 O _4 nanowire arrays /Cu foam three-dimensional integrated electrode (denoted as CFO/Cu-foam NWAs) was firstly designed and synthesized via a simple hydrothermal method follow annealing as a binder-free anode for lithium ion battery. The CoFe _2 O _4 nanowires with diameter of 50–100 nm are uniformly anchored on the porous conductive substrate. Lithium ion battery based on the CFO/Cu-foam NWAs integrated electrode exhibits a high initial capacity of 882.7 mAh · g ^−1 and excellent cyclic stability of 832.1 mAh · g ^−1 after 100 cycles at 1.0 A · g ^−1 which is much better than traditional coated electrode of CoFe _2 O _4 nanowire (defined as CFO NWAs) and CoFe _2 O _4 nanowire/Cu foil integrated electrode (named CFO/Cu-foil NWAs). The improved electrochemical performance might be attributed to superior conductivity and porous skeleton structure which not only reduce contact resistance and polarization, but also relieve volume alteration during the lithiation/delithiation process. These advantages make the CoFe _2 O _4 /Cu foam integrated electrode a promising anode for Li-ion batteries.