Search

This work addresses the problem of automatic head pose estimation and its application in 3D gaze estimation using low quality RGB-D sensors without any subject cooperation or manual intervention. The previous works on 3D head pose estimation using RGB-D sensors require either an offline step for supervised learning or 3D head model construction, which may require manual intervention or subject cooperation for complete head model reconstruction. In this paper, we propose a 3D pose estimator based on low quality depth data, which is not limited by any of the aforementioned steps. Instead, the proposed technique relies on modeling the subject's face in 3D rather than the complete head, which, in turn, relaxes all of the constraints in the previous works. The proposed method is robust, highly accurate and fully automatic. Moreover, it does not need any offline step. Unlike some of the previous works, the method only uses depth data for pose estimation. The experimental results on the Biwi head pose database confirm the efficiency of our algorithm in handling large pose variations and partial occlusion. We also evaluated the performance of our algorithm on IDIAP database for 3D head pose and eye gaze estimation.

Background: Driving retraining classes may offer an opportunity to attenuate some effects of aging that may alter driving skills. Unfortunately, there is evidence that classroom programs (driving refresher courses) do not improve the driving performance of older drivers. The aim of the current study was to evaluate if simulator training sessions with video-based feedback can modify visual search behaviors of older drivers while changing lanes in urban driving., Methods: In order to evaluate the effectiveness of the video-based feedback training, 10 older drivers who received a driving refresher course and feedback about their driving performance were tested with an on-road standardized evaluation before and after participating to a simulator training program (Feedback group). Their results were compared to a Control group (12 older drivers) who received the same refresher course and in-simulator active practice as the Feedback group without receiving driving-specific feedback., Results: After attending the training program, the Control group showed no increase in the frequency of the visual inspection of three regions of interests (rear view and left side mirrors, and blind spot). In contrast, for the Feedback group, combining active training and driving-specific feedbacks increased the frequency of blind spot inspection by 100% (32.3 to 64.9% of verification before changing lanes)., Conclusions: These results suggest that simulator training combined with driving-specific feedbacks helped older drivers to improve their visual inspection strategies, and that in-simulator training transferred positively to on-road driving. In order to be effective, it is claimed that driving programs should include active practice sessions with driving-specific feedbacks. Simulators offer a unique environment for developing such programs adapted to older drivers' needs.

Purpose: In permanent seed implants, 60 to more than 100 small metal capsules are inserted in the prostate, creating artifacts in x-ray computed tomography (CT) imaging. The goal of this work is to develop an automatic method for metal artifact reduction (MAR) from small objects such as brachytherapy seeds for clinical applications., Methods: The approach for MAR is based on the interpolation of missing projections by directly using raw helical CT data (sinogram). First, an initial image is reconstructed from the raw CT data. Then, the metal objects segmented from the reconstructed image are reprojected back into the sinogram space to produce a metal-only sinogram. The Steger method is used to determine precisely the position and edges of the seed traces in the raw CT data. By combining the use of Steger detection and reprojections, the missing projections are detected and replaced by interpolation of non-missing neighboring projections., Results: In both phantom experiments and patient studies, the missing projections have been detected successfully and the artifacts caused by metallic objects have been substantially reduced. The performance of the algorithm has been quantified by comparing the uniformity between the uncorrected and the corrected phantom images. The results of the artifact reduction algorithm are indistinguishable from the true background value., Conclusions: An efficient algorithm for MAR in seed brachytherapy was developed. The test results obtained using raw helical CT data for both phantom and clinical cases have demonstrated that the proposed MAR method is capable of accurately detecting and correcting artifacts caused by a large number of very small metal objects (seeds) in sinogram space. This should enable a more accurate use of advanced brachytherapy dose calculations, such as Monte Carlo simulations.

This paper proposes a new morphology-based approach for the interslice interpolation of current transformer (CT) and MRI datasets composed of parallel slices. Our approach is object based and accepts as input data binary slices belonging to the same anatomical structure. Such slices may contain one or more regions, since topological changes between two adjacent slices may occur. Our approach handles explicitly interslice topology changes by decomposing a many-to-many correspondence into three fundamental cases: one-to-one, one-to-many, and zero-to-one correspondences. The proposed interpolation process is iterative. One iteration of this process computes a transition sequence between a pair of corresponding input slices, and selects the element located at equal distance from the input slices. This algorithmic design yields a gradual, smooth change of shape between the input slices. Therefore, the main contribution of our approach is its ability to interpolate between two anatomic shapes by creating a smooth, gradual change of shape, and without generating over-smoothed interpolated shapes.

In this work, we introduce an extension of the linear elastic tensor-mass method allowing fast computation of non-linear and visco-elastic mechanical forces and deformations for the simulation of biological soft tissue. We aim at developing a simulation tool for the planning of cryogenic surgical treatment of liver cancer. Percutaneous surgery simulation requires accurate modelling of the mechanical behaviour of soft tissue, and previous experimental characterizations have shown that linear elasticity is only a coarse approximation of the real properties of biological tissues. We first show that our model can simulate different types of non-linear and visco-elastic mechanical behaviours at speeds which are compatible with real-time applications. Then an experimental setup is presented which was used to characterize the mechanical properties of deer liver tissue under perforation by a biopsy needle. Experimental results demonstrate that a linear model is not suitable for simulating this application, while the proposed model succeeds in accurately modelling the axial load measured on the needle.

We propose a web-based collaborative CAD system allowing for the remote communication and data exchange between radiologists and researchers in computer vision-based software engineering. The proposed web-based interface is implemented in the Java Advanced Imaging Application Programming Interface. The different modules of the interface allow for 3D and 2D data visualization, as well as for the parametric adjustment of 3D reconstruction process. The proposed web-based CAD system was tested in a pilot study involving a limited number of liver cancer cases. The successful system validation in the feasibility stage will lead to an extended clinical study on CT and MR image databases.

This paper presents a newly developed method to estimate, in magnetic resonance (MR) images, the temperatures reached within the volume of an iceball produced by a cryogenic probe. Building on the direct measurements of the MR signal intensity and its correlation with independent temperature variations at the phase transition from liquid to solid, the thermal information embedded in the images was accessed. The volume and diameter of the growing iceball were estimated from a time series of MR images. Using regressions over the volume in the time and thermal domains, this method predicted the cryogenic temperatures beyond the range of sensitivity of the MR signal itself. We present a validation of this method in samples of gelatin and ex vivo pig liver. Temperature predictions are shown to agree with independent thermosensor readings over a range extending from 20 degrees C down to -65 degrees C, with an average error of less than 6 degrees C.