Search

The parasitoid Spathius agrili Yang, introduced in the USA to suppress populations of the emerald ash borer (EAB), Agrilus planipennis Fairmaire, has been recovered at a release site for the first time in eastern Tennessee after a single year of releases. Other native parasitoids, including Spathius floridanus Ashmead, undetermined species of Spathius (possibly Spathius elegans Matthews and Spathius parvulus Matthews) and Atanycolus cappaerti Marsh & Strazanac, also known to be associated with EAB, were recovered. These recoveries represent the first documentation of these four species, including the introduced S. agrili, associated with EAB in the southern USA. Implications for biological control efforts against EAB are discussed. [ABSTRACT FROM AUTHOR]

Using sticky traps, we compared the efficacy of chemical and visual lures, both alone and in combination, for improving the detection of populations of the emerald ash borer (EAB), Agrilus planipennis. Ash leaflets to which EAB visual decoys were pinned and coated with sticky material were able to trap EAB with as high a rate of detection as large sticky visually unbaited 'prism traps' currently used in wide-scale EAB surveillance programs in North America, in a high-density area. Both the sticky leaf traps and prism traps captured more EAB when a point source of plant odours, either manuka or phoebe oil, was deployed with the trap. For the sticky leaf traps, the shape of the EAB visual decoy lure was found to be important in optimizing the detection rate. Either an entire dead beetle or else two elytra placed side by side to mimic a resting beetle resulted in optimal trap performance. When two elytra were placed end to end or else other body parts were deployed, the traps lost their efficacy. Small green plastic surfaces to which EAB visual decoys were pinned were found to be fairly good substitutes for live ash leaflets, but the rate of beetle detection was reduced significantly from that of the ash leaflet plus EAB decoy. Throughout all experiments, a clear male bias occurred in sticky leaf traps when EAB visual decoys were placed on the traps. The implications of these findings for developing new trapping designs for EAB and other forest buprestids are discussed. [ABSTRACT FROM AUTHOR]

Metal matrix composites (MMCs) have received much attention due to their promising advanced mechanical properties. The aim of this work is to create a micro-macro model of composite crystallization. The developed model is coupled with the process of heat flow in the macroscopic scale, resulting from the heat emission during the nucleation and the growth of grains. Taking into account both of these phenomena, the proposed model is distinguished by a good reflection of reality. Moreover, the presented model assumes that the function of grain density depends on the maximal supercooling and the mass volume of the reinforcement phase particles. The knowledge of the equations, describing the function of grain density depending on the degree of supercooling, is necessary in the, more and more often used, numerical modelling of the casting structure. [ABSTRACT FROM AUTHOR]

The relatively simple clock neuron network of Drosophila is a valuable model system for the neuronal basis of circadian timekeeping. Unfortunately, many key neuronal classes of this network are inaccessible to electrophysiological analysis. We have therefore adopted the use of genetically encoded sensors to address the physiology of the fly's circadian clock network. Using genetically encoded Ca2+and cAMP sensors, we have investigated the physiological responses of two specific classes of clock neuron, the large and small ventrolateral neurons (l- and s-LNvs), to two neurotransmitters implicated in their modulation: acetylcholine (ACh) and γ-aminobutyric acid (GABA). Live imaging of l-LNvcAMP and Ca2+dynamics in response to cholinergic agonist and GABA application were well aligned with published electrophysiological data, indicating that our sensors were capable of faithfully reporting acute physiological responses to these transmitters within single adult clock neuron soma. We extended these live imaging methods to s-LNvs, critical neuronal pacemakers whose physiological properties in the adult brain are largely unknown. Our s-LNvexperiments revealed the predicted excitatory responses to bath-applied cholinergic agonists and the predicted inhibitory effects of GABA and established that the antagonism of ACh and GABA extends to their effects on cAMP signaling. These data support recently published but physiologically untested models of s-LNvmodulation and lead to the prediction that cholinergic and GABAergic inputs to s-LNvs will have opposing effects on the phase and/or period of the molecular clock within these critical pacemaker neurons. [ABSTRACT FROM AUTHOR]

Abstract  Austempered ductile iron (ADI) has complex microstructure containing a multiphase matrix (called ‘ausferrite’), graphite spheres and oxide inclusions. The corrosion resistance of ADI is related to its microstructure which is determined by heat treatment parameters (like austempering temperature, austempering time, austenitising temperature and austenitising time). In the present paper, the electrochemical behaviour and corrosion resistance of ADI have been investigated by means of the electrochemical microcell technique and classical electrochemical measurements in sodium chloride solution. Particular attention has been paid to the influence of austempering temperature on the microstructure and pitting corrosion. It has been shown that ADI austempered at 430 °C has upper ausferritic microstructure and reveals a better corrosion resistance in sodium chloride solution than ADI austempered at 280 °C. Moreover, the corrosion resistance increases as the volume fracture of ferrite increases and the carbon content of austenite decreases. The good corrosion behaviour of ADI austempered at 430 °C was also related to the good coarsening of the austenite grains and broad ferrite needles (less ferrite/austenite interfaces). It has been demonstrated that silicon is the alloying element hindering the anodic dissolution of the alloy. [ABSTRACT FROM AUTHOR]

Abstract  The cuticular hydrocarbon profiles of emerald ash borers, Agrilus planipennis, were examined to determine if there are differences in these compounds between the sexes. We also assessed feral male EAB in the field for behavioral changes based on the application of a female-specific compound to dead, solvent-washed beetles. Males in the field spent significantly more time attempting copulation with dead, pinned female beetles coated with a three-beetle-equivalent dose of 3-methyltricosane than with solvent-washed beetles or those coated in 3-methyltricosane at lower concentrations. Males in the field spent the most time investigating pinned dead, unwashed female beetles. In the laboratory, sexually mature males were presented with one of several mixtures applied in hexane to filter paper disks or to the elytra of dead female beetles first washed in solvent. Male EAB also spent more time investigating dead beetles treated with solution applications that contained 3-methyltricosane than dead beetles and filter paper disks treated with male body wash or a straight-chain hydrocarbon not found on the cuticle of EAB. [ABSTRACT FROM AUTHOR]

We examined various methods of trapping emerald ash borers (EAB), Agrilus planipennis Fairmaire, using solely visual cues based on previous work that has documented the importance of visual cues in EAB mate location. Here, we give the results of two of these methods, coloured sticky cards (yellow or blue), or live ash leaves covered with spray-on adhesive to which dead male EAB visual lures had been pinned. Feral male beetles were captured effectively on the sticky traps made from dead male EAB on ash leaves. These sticky-leaf-traps captured more male EAB when deployed in high-population density areas than low-density areas, but did capture EAB even at lower population densities. More feral males were captured on these traps when they were placed higher in the trees, regardless of the population density of EAB. Very few feral female EAB were captured using the sticky-leaf-traps. This novel method of EAB trapping may allow ‘real-time’ population detection and monitoring of EAB adults during the active flight period rather than locating larval galleries during the autumn and winter after adult flight and attack. Feral male beetles were also captured using standard yellow- or blue-coloured sticky cards to which male EAB had been affixed with adhesive; however, this type of trap was much less effective overall than using the sticky-leaf-traps. Furthermore, Agrilus cyanescens, a species similar in colour to EAB but smaller in size, showed a strong response to blue-coloured sticky traps to which dead male EAB had been affixed with adhesive, suggesting a general use of visual cues in the mating systems of some of the other Buprestidae as well. [ABSTRACT FROM AUTHOR]

The aim in this work is to develop a log-normal distribution of heterogeneous nucleation substrates for the composite based on AZ91 alloy reinforced by SiC particles. The computational algorithm allowing the restore of the nucleation substrates distribution was used. The experiment was performed for the AZ91 alloy containing 1 % wt. of SiC particles. Obtained from experiment, the grains density of magnesium primary phase and supercooling were used to algorithm as input data. [ABSTRACT FROM AUTHOR]

The aim of this study was to analyze the crystallization of the Mg72Zn24Ca4 metallic glass alloy. The crystallization process of metallic glass Mg72Zn24Ca4 was investigated by means of the differential scanning calorimetry. The glass-forming ability and crystallization are both strongly dependent on the heating rate. The crystallization kinetics, during the isothermal annealing, were modelled by the Johnson–Mehl–Avrami equation. Avrami exponents were from 2.7 to 3.51, which indicates diffusion-controlled grain growth. Local exponents of the Johnson–Mehl–Avrami equation were also calculated. In addition, the Mg phase—being the isothermal crystallization product—was found, and the diagram of the time–temperature phase transformation was developed. This diagram enables the reading of the start and end times of the crystallization process, occurring in amorphous ribbons of the Mg72Zn24Ca4 alloy on the isothermal annealing temperature. The research showed high stability of the amorphous structure of Mg72Zn24Ca4 alloy at human body temperature. [ABSTRACT FROM AUTHOR]

The aim of this work was to monitor the corrosion rate of the Mg72Zn24Ca4 and Zn87Mg9Ca4 alloys. The purity of the alloying elements was 99.9%. The melt process was carried out in an induction furnace. The melting process took place under the cover of an inert gas (argon). The copper form was flooded by liquid alloy. Then, in order to obtain ribbons, the cast alloy, in rod shape, was re-melted on the melt spinning machine. The corrosion resistance of both alloys has been determined on the basis of the following experiments: measurements of the evolution of OCP (open circuit potential), LSV (linear sweep voltamperometry) and EIS (electrochemical impedance spectroscopy). All corrosion tests were carried out in Ringer's solution at 37 °C and pH 7.2. The corrosion tests have revealed that the zinc alloy, Zn87Mg9Ca4, exhibits significantly higher corrosion resistance in the Ringer solution compared to the magnesium alloy, Mg72Zn24Ca4. Moreover, it has been shown that the cathodic reaction proceeds faster on the surface of ribbons. EIS measurements show that the dissolution of Mg alloy proceeds with two steps: transfer of Mg2+ ions to the Ringer solution and then the formation of the corrosion products, which are deposited on the surface of magnesium alloy. It has been revealed, too, that for both bulk materials, diffusion of chloride ions through the corrosion product's layer takes place. [ABSTRACT FROM AUTHOR]

This paper presents tests of metallic glass based on Mg72Zn24Ca4 alloy. Metallic glass was made using induction melting and further injection on a rotating copper wheel. A differential scanning calorimeter (DSC) was used to investigate the phase transformation of an amorphous ribbon. The tests were carried out at an isothermal annealing temperature of 507 K. The Kolmogorov-Johnson-Mahl-Avrami-Evans model was used to analyze the crystallization kinetics of the amorphous Mg72Zn24Ca4 alloy. In this model, both Avrami's exponent n and transformation rate constant K were analyzed. Both of these kinetic parameters were examined as a function of time and the solid fraction. The Avrami exponent n value at the beginning of the crystallization process has value n = 1.9 and at the end of the crystallization process has value n = 3.6. The kinetic constant K values change in the opposite way as the exponent n. At the beginning of the crystallization process the constant K has value K = 9.19 × 10−7 s−n (ln(K) = −13.9) and at the end of the crystallization process has the value K = 6.19 × 10−9 s−n (ln(K) = −18.9). These parameters behave similarly, analyzing them as a function of the duration of the isothermal transformation. The exponent n increases and the constant K decreases with the duration of the crystallization process. With such a change of the Avrami exponent n and the transformation rate constant K, the crystallization process is controlled by the 3D growth on predetermined nuclei. Because each metallic glass has a place for heterogeneous nucleation, so called pre-existing nuclei, in which nucleation is strengthened and the energy barrier is lowered. These nuclei along with possible surface-induced crystallization, lead to rapid nucleation at the beginning of the process, and therefore a larger transformed fraction than expected for purely uniform nucleation. These sites are used and saturated with time, followed mainly by homogeneous nucleation. In addition, such a high value of the Avrami exponent n at the end of the crystallization process can cause the impingement effect, heterogeneous distribution of nuclei and the diffusion-controlled grain growth in the Mg72Zn24Ca4 metallic glassy alloy. [ABSTRACT FROM AUTHOR]