Search

Mordellid galls were collected from stems of Japanese mugwort, Artemisia indica var. maximowiczii (Nakai) H. Hara, in early spring at three riverbeds in the Kinki district, central Japan, and reared in the laboratory. Adults of two mordellids, Mordellistena brevilineata Nomura (96.2% of the total number of individuals) and M. fuscosuturalis Nomura (3.8%), emerged from the galls. The galls were simple fusiform swellings in the stems. We could not distinguish the 2 species by gall morphology. Mortality of the immatures mostly could not be determined, but parasitoids (Eupelmus sp., Entedon sp., and braconids, etc.) accounted for about 25% of the total mortality observed. Survival of immatures tended to be higher and the concomitant parasitism lower in thicker rather than thinner galls, and the galls became thick when they were formed in larger diameter stems. Oviposition and larval establishment in thick stems appeared to be advantageous for the completion of development and avoidance of parasitoid attack.

The plant-pathogenic fungus Claviceps paspali infects florets of the dallisgrass Paspalum dilatatum and induces the plant to produce honeydew (containing massive amounts of conidia), which in turn attracts insects for dispersal of the fungal spores. In Japan, the association between C. paspali and its host plant is common, although both P. dilatatum and C. paspali are introduced species. To determine the dispersal agents of the introduced C. paspali, we examined which insects sapped the P. dilatatum honeydew produced by C. paspali. The study was conducted from September to October 2003 in central Japan. Adults of 48 moth species and two lacewing species visited infected spikelets of P. dilatatum and sapped the honeydew at night. The dominant moths, which carried C. paspali conidia on their proboscises, migrate long distances every year. Therefore, migratory moths may transmit C. paspali spores from diseased to healthy host plants and may have spread C. paspali to other areas in Japan where C. paspali did not previously exist.

Seven species of parasitoids and two species of moths emerged from bud galls induced by two species of gall midges (Asteralobiasoyogo (Kikuti) and A. sasakii (Monzen)) (Diptera: Cecidomyiidae) on four species of trees of the genus Ilex (I. pedunculosa Miq., I. crenata Thunb., I. chinensis Sims, and I. integra Thunb.) (Aquifoliaceae). Larvae of the moth Rhopobota ustomaculana (Curtis) (Lepidoptera: Tortricidae) bored into bud galls induced by A. soyogo and A. sasakii on I. pedunculosa and I. crenata, respectively. Rhopobota ustomaculana larvae fed on leaves as well as gall tissues of I. pedunculosa, suggesting that R. ustomaculana is a facultative cecidophage. To clarify consequences of gall tissues as a food resource for cecidophagous moths, we compared the chemical properties of galls with those of normal plant tissues (leaves) of I. pedunculosa. Bud galls of I. pedunculosa had higher water content and lower nitrogen, carbon, and polyphenol (a chemical associated with plant insect defenses) contents than leaves. Therefore, bud galls may be a richer food resource for R. ustomaculana larvae because of the higher water content and lower carbon and polyphenol contents, although they are a poorer resource in terms of nitrogen content.

This paper introduces the intelligent sequence design system of multi-stage cold extrusion. It discusses the method to build the part feature modeling and to realize feasibility checking, process planning and evaluation, process parameter optimization and sequence optimal selection, mainly focuses on the feature modeling and system implementation strategy. According to the given input data, the system can generate the forgeable geometry and the basic sequence design and evaluates the sequences, depending on the initial billet size and material or the evaluation knowledge in the knowledge base. An example proves the proposed theory and method.

Finish milling with a ball-end mill is a key process in manufacturing high-precision and complex workpieces such as dies and moulds. Due to the complexity of the milling process, it is difficult to observe experimentally the surface microcharacteristics such as the surface topography and roughness of machined workpieces real-time during machining. This necessitates simulation of the process. In this area, the existing related simulation researches focus mainly on scallop heights; few have presented a whole picture of the microcharacteristics of milled surfaces. A comprehensive simulation system has been developed for predicting the surface topographic features and roughness formed in the milling process, and the effect of machining parameters was studied. This paper focuses on the modelling method and theory adopted in the simulation system. The method to improve the calculation accuracy is discussed in detail. The approach to incorporate the effects of the cutting tool run-out and wear is also presented. Experiments are also carried out to verify the simulation results.

The feeding ecology of Scarites aterrimus Morawitz (Coleoptera: Carabidae), an endangered shore-inhabiting species, was studied by field observations and laboratory experiments. S. aterrimus adults fed on a dead Anisolabis maritima (Bonelli) earwig and dead Armadillidium vulgare (Latreille) pill bug on a beach at night in central Japan. In the laboratory, the adults frequently fed on the carcasses of an earwig, the maggots of the fly species Phaenicia sericata (Meigen), the sandhopper Platorchestia joi Stock & Biernbaum and the pill bug A. vulgare. Predatory behavior was restricted to live fly larvae and pill bugs, occasionally live earwigs and sandhoppers. Similar results were obtained for S. aterrimus larvae. S. sterrimus seems to be a scavenger of various invertebrates and also a predator of slow-moving, less-defended invertebrates.

1. Most lepidopteran larvae use all of their legs (thoracic legs and abdominal prolegs) when walking on solid substrates. When caterpillars involuntarily or intentionally drop from the tree canopy, they can regain their original position by climbing silk lifelines spun out from the head spinnerets. However, the taxonomic distribution of this climbing behaviour in the Lepidoptera is unknown. 2. Here, lifeline-climbing behaviour is reported in 13 lepidopteran species belonging to different taxa (five superfamilies and six families: Zygaenidae, Drepanidae, Geometridae, Lymantriidae, Noctuidae, and Nymphalidae). Caterpillars usually used only the three pairs of thoracic legs to climb lifelines, although they use different methods to walk on solid substrates, according to their taxonomic grouping and number of prolegs. 3. Results suggest that lifeline-climbing behaviour using only the thoracic legs is common among various lepidopteran taxa. The majority of species (12 of 13) climbed lifelines by alternating movement of the left and right set of thoracic legs, aided by side-to-side body movements. Only one of the 13 species, the geometrid Naxa seriaria (Motschulsky), climbed lifelines by drawing them down with its thoracic legs, aided by abdominal looping movements. While side-to-side movement of the abdomen was previously reported in lifeline climbing, this is the first report of the use of looping movements.

Recent strong demand for production of ultra-precision components drives the need for 5-axis super-precision machines. A design study of such a 5-axis super-precision machine, which is capable of nanometer-level precision cutting, has been conducted by searching innovative solutions to the three major problems: friction, thermal deformation, and positioning accuracy. The final design implemented the following: stiff aerostatic guideways for near frictionless motion while structural rigidity was maintained, thermally stable structures made of alumina ceramics, and smooth control of linear motor based actuation system by employing high resolution and highly responsive linear encoders and linear power amplifiers. The designed machine has been built to verify the targeted performance. Various shapes that require nanometer- accuracy have been created using the machine. The results have consistently indicated stable nanometer-level accuracy. Targeted design performance has been successfully demonstrated.

This paper develops a comprehensive interpolation scheme for non-uniform rational B-spline (NURBS) curves, which does not only simultaneously meet the requirements of both constant feedrate and chord accuracy, but also real-time integrates machining dynamics in the interpolation stage. Although the existing work in this regard has realized the importance to simultaneously consider chord error and machining dynamics, none has really incorporated these in one complete interpolation scheme. In this paper, machining dynamics is considered for three aspects: sharp corners or feedrate sensitive corners on the curves, components with high frequencies or frequencies matching machine natural ones and high jerks. A look-ahead module was developed for detecting and adaptively adjusting the feedrate at the sharp corners. By Fast Fourier Transform (FFT) analysis with a moving window in the interpolation stage identified were some special frequency components such as those containing high frequencies or with frequencies matching machine natural ones. Then, the notch filtering or time spacing method was used to eliminate these components. To more completely reduce feedrate and acceleration fluctuations, the jerk-limited algorithm was also developed. Finally, the interpolated feedrate was further smoothened with B-spline fitting method and the NURBS curves were re-interpolated with the smoothened feedrate. During the interpolation, the chord error was repeatedly checked and confined in the prescribed tolerance. Two NURBS curves were used as examples to test the feasibility of the developed interpolation scheme.

Finish milling with a ball end mill is a key process in manufacturing high-precision and complex workpieces, such as dies and molds. Because of the complexity of the milling process, it is difficult to evaluate the microcharacteristics of machined surfaces real time, which necessitates the simulation of the process. In this area, the existing related simulation researches mainly focus on scallop height evaluation, but few have presented a whole picture of the microcharacteristics of milled surfaces. This paper develops a comprehensive simulation system based on a Z-map model for predicting surface topographic features and roughness formed in the finish milling process and studies the effect of machining parameters. The adoption of the discretization concept of the tool’s cutting motion makes it possible to dynamically track the cutting tool-workpiece interaction with the tool movement and to describe the cutting edges-workpiece discrete cutting interaction more realistically and, therefore, the microcharacteristics of the machined surfaces more accurately. Also, the effects of the cutting tool run-out and wear are incorporated into the developed model through modifying the tool center motion and the cutting-edge shape, respectively. As a fundamental study, the tool-swept envelope has been simulated. The developed simulation system is applied to thoroughly study the surface features formed by the 2.5-axis finish milling process. The application for general three-axis machining is discussed. Additionally, this paper studies the effect of the tool inclination, which is the most common characteristic in 3+2- or five-axis milling processes, on the machined surface features. Experiments are carried out to study the milling process and to verify the simulation results. The difference between the simulated and experimental results is discussed, and the reason behind the difference is explored.

For high performance machining, it is essential to minimize the vibration of a machine tool, which is incurred due to the instantaneous acceleration/deceleration. To minimize this vibration, it is fundamentally ideal to apply the driving force at the most shock-insensitive position of the moving structure: the center of gravity. Aiming at developing unparalleled high-performance machine tool systems, the effectiveness of the Drive at the Center of Gravity (DCG) principle on vibration reduction has been studied thoroughly by analytical and experimental approaches. Based on the results obtained, a new design of the high-performance machine tools has been discussed with a special focus on the installation of DCG mechanism without sacrificing any advantages already obtained in the recent basic design rules. The paper also describes the comparative study between a machine tool based on the DCG principle and the one with a conventional driving configuration. The results obtained have shown a distinctive performance difference in machining stability.

Eagle syndrome is characterized by the sensation of a foreign body in the throat, odynophagia, dysphagia, and craniofacial or cervical pain due to an elongated styloid process. Some reports have indicated that an elongated styloid process is one of the causes of carotid artery dissection (CAD). This is the first report describing the anesthetic management of Eagle syndrome complicated by CAD. Careful intratracheal intubation and neurological monitoring are important to prevent intraoperative neurologic deficits. In addition, attention must be paid to postoperative complications such as airway obstruction.

We observed epizootics and behavioral alteration in the arctiid caterpillar Chionarctia nivea after infection by an entomopathogenic fungus, Entomophaga aulicae, in April at a riverbank in Kyoto Prefecture, central Japan. The density of arctiid cadavers infected with E. aulicae was 1.31 individuals/m2. The critically ill caterpillars crawled up the dead stems of grasses and herbs such as the common reed Phragmites communis and the Japanese mugwort Artemisia indica var. maximowiczii to die at and near the highest parts of the stems, while the healthy larvae usually wandered on the ground and fed on the leaves of small herbs. This behavioral difference could be caused by infection with E. aulicae to enhance dispersal of conidia by active discharge in Entomophthorales with the aid of wind and rainfall.

The paper presents a surface-based approach for geometric feature recognition for the purpose of automating the process planning of freeform surface machining. The proposed approach consists of the following four steps for recognition of the geometric features: conversion and preprocessing of the surface geometry data, subdivision of NURBS surface, reconstruction of surface orientation areas, and recognition of geometric features. The proposed scheme assumes that the input geometry data form is based on an IGES CAD model and the surface model can be represented in the form of trimmed NURBS surfaces. The connectivity relations of the product surfaces are analyzed and each surface is subdivided into orientation regions based on the surface normal vector over a certain point density grid, and then all the connected regions with the same orientation type are grouped into surface orientation areas. After that, the geometric feature will be recognized through the analysis of area connectivity and relationship. The paper describes the developed algorithms on surface orientation region subdivision, surface orientation area reconstruction, and geometric feature recognition. The verified feasibility study of the developed method is also presented.

Herbivory in the syconia of six Ficus (Moraceae) species (F. superba, F. varieagata, F. virgata, F. irisana, F. bengutensis and F. septica) was examined in March 2002 on Iriomote Island, south-western Japan. Larvae of two lepidopteran species, Pachybotys spissalis (Guenee) (Pyralidae: Pyraustinae) and Stathmopoda sp. (Stathmopodidae) were observed to bore into the Ficus syconia. The attack rate by the moths varied from 0 to 38.5% across Ficus trees. The interiors of the syconia were heavily grazed by the moth larvae. Because figs (syconia) can be regarded as galls and seeds, according to sex and developmental stage, the moth larvae could be considered as gall or seed herbivores, and predators of fig wasps. Moth attack in the Ficus syconia could cause the destruction of fig wasp populations, as fig wasps develop in the syconia.

Gall midge larvae are associated with specific fungal symbionts in ambrosia galls. We found that the weevil Wagnerinus costatus (Hustache) (Coleoptera: Curculionidae: Ceutorhynchinae) frequently attacked ambrosia galls formed by the midge Asphondylia diervillae Felt (Diptera: Cecidomyiidae: Asphondyliini) on the buds of Weigela hortensis (Sieb. et Zucc.) (Caprifoliaceae) in three locations in central Japan. From late April to early May, female weevils laid single eggs in fully developed ambrosia galls, and upon hatching weevil larvae bored into these galls. The rate of parasitism by weevils was consistently high, from 90.2 to 94.5% in each gall midge population. Weevil larvae fed on the hyphae of fungal symbionts as well as on gall tissue. In most cases, parasitism by weevils did not influence the survivorship of A. diervillae or its parasitoids, because oviposition and feeding by the weevil occurred when gall midges had already developed into mature larvae or pupae within hard chambers surrounde...

Based on Z-map method, in this paper the development of a geometric model for the linear motor equipped EDM die-sinking process is described. Firstly discussed are the advantages and benefits of the introduction of the linear motor into EDM die-sinker. The current model has been employed to calculate the minimum gap distance for sparks to occur and to analyze the possibility of spark generation between the workpiece and electrode surfaces. Also calculated is the crater formed by a single spark. The final machined surface topography is predicted. The influence of peak current and discharge duration on the average surface roughness is simulated. The experiment has been conducted to study the effects of machining conditions as well as to verify the effectiveness of the developed geometric model.

To meet the accuracy requirements, coordinate measuring machines (CMMs) are generally operated with low acceleration-deceleration profiles to minimize residual vibration. This results in low efficiency and may cause a bottleneck in the production line. In the authors' previous study, two control configurations utilizing the input-shaping technique and feedforward controller were proposed to reduce residual vibrations in single-axis and multiple-axis types of motion. This paper focuses on the evaluation of the proposed methods by implementation on a physical CMM. The dynamics of the machine were identified via experiment. The controller design techniques were presented to give the appreciation of the design steps. The evaluations were done by experiment. It was found that the proposed controller implementation methods reduce the residual vibrations by 68 percent for single-axis motion and 88 percent for multiple-axis motion. The methods allow the use of a higher acceleration profile, which results in higher productivity.

The host plant, oviposition behavior and larval ecology of Profenusa japonica Togashi are reported for the first time. Adults of P. japonica mated and oviposited on a polyantha rose, Rosa multiflora (Rosaceae), in April. Each female adult laid an egg on the edge of a leaflet. Hatched larvae consumed the parenchymatous layer of leaflets and in so doing created a mine. The larval stage comprised five instars. On average, 70.6% of the total area of a leaflet was consumed by one larva. Female adults of P. japonica laid eggs singly, probably to avoid larval competition for food.

Few spittlebug species are gall formers, but the Homoptera as a whole contain many gall-forming species in many families. Nymphs of a spittlebug, Aphelaenus nigripectus (Aphrophoridae, Auchenorrhyncha, Homoptera), were observed to induce leaf-roll galls on cherry trees (Prunus speciosa, P. × yedoensis and P. pendula cv. pendula (Rosaceae)) in late April in Kyoto, Japan. Aphelaenus nigripectus nymphs aggregated on the ventral surface of the young leaves, fed on the ventral (abaxial) midvein, and excreted masses of froth in the rolled leaves. In a field experiment, it was discovered that feeding of A. nigripectus nymphs can induce rolling of the cherry leaves, and that the rolled leaves may provide protection from desiccation to A. nigripectus nymphs. This is the first record of gall-forming habits in Japanese spittlebugs.

Purpose. The study was done to determine the characteristics and prevalence of myocardial ischemia with inverted T waves after noncardiac surgery. Methods. A list of patients who developed electrocardiogram (ECG) T-wave inversion associated with wall-motion abnormalities observed by transthoracic echocardiography (TTE) following noncardiac surgery was generated from the intensive care unit (ICU) medical records database between January 1, 1995, and December 31, 2000. The hospital records of these patients were analyzed retrospectively. Results. Among 4219 patients (2187 men and 2032 women) who were admitted to the ICU after noncardiac surgery, 13 developed myocardial ischemia with inverted T waves postoperatively. All of the patients were middle-aged or elderly women with no history of coronary artery disease; nine of them had undergone intraabdominal surgery. Characteristic ECG findings included inverted T waves in the left precordial leads, which subsequently became prominent with QT prolongation. In all of these patients, wall-motion abnormalities were observed on the anterior wall, but these resolved within 60 days of the episode. Myocardial ischemia was asymptomatic, with neither hemodynamic changes nor adverse cardiac events. Conclusion. Newly developed giant negative T waves with QT prolongation in the ECG may indicate myocardial stunning, but do not in themselves imply a poor prognosis. The marked preponderance of middle-aged and elderly women with this type of myocardial ischemia remains to be explained.

This paper presents an in-process inspection-oriented autonomously generative CMM (Coordinate Measuring Machine) part programming methodology with a simplified part programming process to decrease the time and skill for CMM part programming. The proposed method differs from the CAD-based CMM programming approach. Using this new method, machining features in a complex part can be efficiently inspected after any stage of machining operations or after machining these features. The concept of the proposed CMM part programming approach and its implementation are described in this paper. The results obtained from the feasibility study show the developed CMM part programming system can autonomously generate an inspection plan for a work-in-progress part model generated from NC programs to realize the in-process measurement.

To clarify assemblage patterns of overwintering ground beetles (Coleoptera: Carabidae) and other insect predators in farmland habitats for the purpose of proper land management to enhance beneficial predators, we collected carabid and other insect predators at eight plots including arable and fallow rice and vegetable fields and a bank of an adjacent irrigation pond in central Japan. In total, 159 adults and 268 larvae of 33 carabid species, and 178 individuals of at least 17 species of other insect predators were collected by the quadrat sampling method. In rice fields, both the number of species and no. of individuals of overwintering carabid beetles increased as the soil became dry and vegetational succession proceeded, whereas in fallow vegetable fields carabids decreased according to succession. Similar trends were confirmed in other insect predators. Variations of carabid species richness and abundances among the plots might be attributed to soil water content, vegetation and prey availability. In early-successional fallow vegetable fields, the larvae of the carabid genus Harpalus overwintered with high density; this appeared to be because the fingergrass Digitaria ciliaris (Poaceae), whose seeds were a potential food for Harpalus, were densely vegetated there. In a dry fallow rice field and early-successional vegetable fields, beneficial predators such as Dolichus halensis (Coleoptera: Carabidae), Agrypnus binodulus (Coleoptera: Elateridae), and soldier beetle (Coleoptera: Cantharidae) larvae hibernated with high densities. For proper farmland management to augment insect predators, it is desirable to maintain fallow rice and vegetable fields as relatively dry habitats and at early successional stages. Ploughing fallow fields in winter may reduce overwintering predacious insect larvae.

This paper deals with the enhancement of tracking accuracy of multi-axis feed drive systems. Feed drive systems with perpendicularly configured two axes are utilized in most of machine tool systems. Although orthogonal errors to desired trajectories are important in machining, tracking errors with respect to each feed drive axis are only considered in most of conventional control systems. In order to improve the machining accuracy, controllers that can directly reduce the contour errors are required especially in high speed machining. A new design of contour tracking controller based on a complete coordinate transformation is proposed in this paper. A variable structure controller is also designed for achieving the performance robustness with respect to plant modeling errors. The effectiveness of the proposed methods is demonstrated by simulation results.

In order to increase the accurate finishing productivity of pearlitic cast iron, face milling by CBN (Cubic Boron Nitride) cutting tools was studied. The main focus of the study is the machinability investigation of pearlitic cast iron with CBN cutting tools by studying the relationships among machining conditions such as feed rate, cutting speed as well as CBN cutting tool type, tool wear, workpiece surface quality, cutting forces, and cutting temperature. In addition, an emphasis is put on the effect of Al additive in pearlitic cast iron on its machinability and tool wear characteristics. High-speed milling experiments with CBN cutting tools were conducted on a vertical machining center under different machining conditions. The results obtained provide a useful understanding of milling performance by CBN cutting tools.

Plants defend themselves using various physical structures, including spines and thorns. However, some herbivorous insects can make use of defensive structures as food sources. A tortricid moth larva in the genus Cydia bores into thorns of the endangered Japanese honey locust Gleditsia japonica. The larva may escape predation by using the thorns as protection. A survey of sharp plant structures was proposed.

Some spiders are well-known to mimic flowers or other plant surfaces in order to be cryptic to both their prey and their predators. We propose that dense, thread-like white trichomes of some plants from Estonia, Greece, Israel and Japan visually mimic spider webs, lepidopteran and spider-mite web nests and plant-pathogenic fungi, and that it may result in reduced herbivory, since various herbivores avoid spider- or other arthropod webs to circumvent predation or toxic attacks, or refrain from colonizing plants that have already been occupied by other herbivores and pathogens. Spiders and other web-forming arthropods are also the prey of certain vertebrate predators and wasps, and therefore such predators may be attracted to these web-like plant structures and prey on the invertebrate herbivores occupying them. We do not dismiss the possibility that these web-like structures may also have other defensive or physiological functions or that they are not classic mimics but rather exploit the herbivore׳s perceptual state concerning the avoidance of potentially risky objects.

We study the two-dimensional generalized magnetohydrodynamics-$\alpha$ system with fractional Laplacians in the dissipative and diffusive terms. We show that the solution pair of velocity and magnetic fields preserves their initial regularity in all cases when the powers add up to one. This settles the global regularity issue in the general case which was remarked by the authors in [33] to be a problem., Comment: The title has been modified, specifically, from "magnetohydrodynamics" to "magneto-hydrodynamics" for a editing reason during the publication process. To appear in J. Math. Fluid Mechanics

The injection molding of reprocessed plastics with a preplastication plunger injection-molding machine was investigated with a focus on the processing conditions. The process of the filling of the resin into the mold is much better controlled with preplastication than with processing in a conventional injection-molding machine. Reprocessing of the resin leads to a reduction in molecular weight due to drastic changes in the resin morphology, thereby causing a reduction in melt viscosity. Direct experimental evidence for reduced viscosity was obtained from measurements of the filling pressure recorded on the machine and also with a melt-flow indexer. The results of this study provide a practical solution for reducing the resin temperature when reprocessed resin is used in the injection molding of plastics. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1455–1461, 2001

Computer-aided process planning (CAPP) is becoming increasingly crucial to today's computer-integrated manufacturing (CIM) and rapid production. To automate the process planning, feature-based operation planning systems have been suggested and studied extensively. In such a system, given a machining feature, the operator requires practical machining operation data for the feature. In this research, a system of reverse engineering is proposed to extract machining features and their associated machining operation data. Furthermore, a machining know-how database containing the extracted data is created for future operation planning. Since successful NC programs contain the machining know-how of skilled workers, the system is aimed at extracting the machining know-how data from the NC programs through reverse engineering. The extraction of the machining features and feature topologies has been addressed previously. The present paper deals with the extraction of machining operation data, including operation se...

Open Control Systems are the key enabler for the realization of modular and re-configurable manufacturing systems. The large number of special purpose machines and the high level of automation have led to an increasing importance of open control systems based on vendor neutral standards. This paper gives an overview on the past, present and future of Open Controller Architecture. After reflecting on the different criteria, categories and characteristics of open controllers in general, the CNC products in the market are evaluated and an overview on the world-wide research activities in Europe, North America and Japan is given. Subsequently the efforts to harmonize the different results are described in order to establish a common world-wide standard in the future. Due to the “mix-and-match” nature of open controllers concentrated attention must be paid to testing mechanisms in the form of conformance and interoperability tests.

An open servo control system for an intelligent CNC machine tool system has been proposed and developed. The developed system is equipped with real-time access window, through which user custom application software can monitor or modify any parameters and variables of servo system in a real time manner as a parallel session while the standard servo control is being performed. The developed system has been implemented in a CNC vertical machining center for feasibility study by integrating the software model reference adaptive control as custom application. The experimental results have successfully demonstrated the effectiveness of the open servo system.

The machining feature is a high-level product geometric representation and macro description of the product geometry. It is vital to machining operation planning and integration of CAD and CAM systems. In the feature-based operation planning, given a feature, the operator needs its associated machining operation data. Since successful NC programs contain machining know-how of skilled workers associated with the machining features, this paper studies the recognition of machining features in milling from the NC programs through reverse engineering, for reuse of the know-how in operation planning. First, the concepts of the machining element, machining feature and feature topology are presented, and the classification and representation of the features are performed from the machining point of view. Then algorithms for recognizing the machining features and feature topologies by analyzing NC programs are developed based on progressive Z-maps. Finally, a prototype is developed to extract the machining features and their associated operation data, and the machining know-how database is generated accordingly. The recognition of a variety of machining features and topologies, as well as their associated machining operations, is demonstrated through an example part from NIST parts repository. By using the generated machining know-how database, the machining operation planning will be automated by its counterpart system—the machining operation planner.

To automate machining process planning, the acquisition and representation of machining knowledge or know-how in a reusable way is needed. The machining know-how is implied in NC programs made by experienced workers. In this paper, the methodology and system for extracting machining know-how in milling operations have been developed. With the system, machining features, operations and their associated cutting conditions (depth of cut, feed rate and spindle speed, etc.) and machining method can be extracted by analysing NC programs in conjunction with the tools used and workpiece blank model. The milling know-how is represented as a collection of these extracted data that can be used in future machining operations. To verify the system, actual NC programs for milling have been analysed and the milling know-how has been extracted successfully.

中高年層に特徴的な体臭 (加齢臭) への対処方法について, (1) 加齢臭キー成分ノネナールの生成を抑制する, (2) においの特性に基づき加齢臭を目立たなくする, もしくは他のにおいに変調する, 二つの方向より検討した。まず, パルミトオレイン酸・スクワレンハイドロパーオキサイド共存によるin vitro加齢臭発生系について検討し, ノネナール生成抑制に有効な薬剤として抗酸化作用に優れるチオタウリンを選抜した。in vitroで効果の認められたチオタウリンについてin vivoでの加齢臭抑制効果を検討したところ, 実使用試験においても体臭中ノネナールレベルを減少させ加齢臭抑制に有効であった。さらに, 加齢臭のにおい特性に着目し, 一般パネルにも認知されるモデル加齢臭の開発と, 各種香料のマスキング効果・変調効果の測定を実施し, 効果の高い機能性香料を開発した。機能性香料により賦香したプロトタイプ製品は, 実使用試験においても効果感の実感できるものであった。これら技術の応用は加齢臭対処商品の方向性を示すものと考えられた。

An exotic leaf beetle, Ophraella communa, originating from the Nearctic region, is a multivoltine oligophagous herbivore and was discovered in Japan in 1996. The host-use of the leaf beetle in the field with adult feeding choice and larval performance on some asteraceous plants in the laboratory were surveyed. O. communa showed a hierarchy of food-plant use: The leaf beetle first used Ambrosia artemisiifolia, on which adults preferred to feed and larvae developed well, and its population increased markedly until defoliating this food-plant. Then, the leaf beetle migrated to Am. trifida and Xanthium spp. In the laboratory, Am. trifida was not as preferred by adults as Am. artemisiifolia, although larval performance on Am. trifida was superior. Xanthium was inadequate both in terms of adult feeding choice and larval performance. Neither eggs nor larvae were found on the plant species on which no larvae completed their growth in the laboratory. These findings suggest that the exotic beetle has great mobility and host-discriminating ability. The finding, that Am. trifida was less used than Am. artemisiifolia despite Am. trifida being suitable for larvae, may be attributable to the fact that adutls tend to oviposit on Am. trifida subsequently to feeding.

This paper presents some aspects of design approach, modeling, and experimental measurement results of a fiber optic-based surface topography measurement sensor that can measure surface roughness as well as the distance between the sensor tip and a surface and surface inclination angles. The working principle of the sensor is based on the detection of light intensity reflecting from the surface being measured. The sensor is very small and easy to operate. It can be attached to a coordinate measuring machine (CMM) to measure surface position coordinates, inclination angles, and surface roughness in a noncontact manner at one measurement setup. A theoretical model of intensity distribution and intensity detection has been established for the sensor. A three-factor and three-level experiment was designed to investigate the relationship between sensor performance and sensor design parameters. Two second-order regression models have been generated, which show that the central distance between the emitting and receiving fibers of a sensor has the strongest influence on the effective range of the sensor; whereas, the critical angle of a receiving fiber influences the sensitivity of the sensor most.

In-process measurement of volumetric accuracy is an effective method to enhance the machine tool motion accuracy for quality machining operations. This paper describes a new three dimensional linear encoder system for measuring the on-axis volumetric accuracy of machine motion. The proposed system consists of three cross-grid grated scales with three sensor-heads, each of which includes six opto-electronic sensing elements. The system uses a noncontact scanning principle to detect six degree-of-freedom motion errors. These represent three linear and three angular displacements along a moving axis. The evaluation tests on the prototype system have successfully demonstrated the feasibility of the proposed technology.

Adults of the woodwasp Tremex longicollis Konow (Hymenoptera: Siricidae) oviposit in the wood of dying Celtis sinensis trees using their ovipositors, and adults of the parasitoid Megarhyssa jezoensis (Matsumura) (Hymenoptera: Ichneumonidae) deposit eggs into the woodwasp larvae that live in the wood, also using their long ovipositors. Many T. longicollis ovipositors, both with and without abdominal segments, and a M. jezoensis ovipositor were found stuck in C. sinensis wood at two parks in Osaka Prefecture, central Japan. Field observations showed that ovipositing woodwasps and parasitoids were attacked by predators during the daytime, and their ovipositors were left behind in the wood. Woodwasps and their parasitoids, which have long ovipositors, may be vulnerable to predation during oviposition.

This article deals with high efficiency and high accuracy fine boring in a monocrystalline silicon ingot by electrical discharge machining (EDM). In manufacturing process of integrated circuits, a plasma-etching process is used for removing oxidation films. This process has recently been examined for use of monocrystalline silicon as the electrode to minimize the contamination. However, it is difficult to machine silicon accurately by the conventional diamond drilling method, because the material removal is due to brittle fracture. The machining force in the EDM process is very small compared with that in conventional machining, therefore, the possibility of high efficiency and high accuracy boring holes in silicon ingot by EDM is experimentally investigated. The removal rate of monocrystalline silicon by EDM is much higher than that of steel, while the electrode wear is extremely small. The improvement method leads to a better hole without chipping at the exit of hole or sticking of the insulator on the wall of hole. Furthermore, it is proved that even a high aspect ratio of about 200 boring is possible.

総合集中治療部で治療を要した産科患者の頻度,原因,転帰を調査し,産科重症患者の内容を分析した。1985～1996年に当院集中治療部に入室した産科患者は40名で,頻度は同時期の全ICU入室患者数の0.17%であった。入室理由は産科的合併症によるものが75%,内科疾患合併が25%で,主たる産科合併症は妊娠中毒症,分娩後出血,胎盤早期剥離であった。入室経路で比較すると,転送患者は院内患者に比し入室時のAPACHE IIスコア,妊娠中毒症の重症度,濃厚治療を要した合併症率が有意に高く,ICU在室日数も有意に長かった。40症例中26症例(65%)が1日でICUを退室し,死亡は羊水塞栓の1症例のみであった。産科重症患者は迅速かつ適切な処置を行えば予後は良好であり,その意味で集中治療部の存在の意義は大きい。産前管理の重要性が再認識されたとともに,今後妊娠中毒症の解明により重症患者の頻度の軽減が期待される。

Functionally gradient materials (FGM) were prepared using layers of ZrO2 –3 mol% Y2O3 ceramic and NiCrAlY powders. A fine-grained zirconia powder was chosen to lower the ceramic sintering temperature and achieve simultaneous metal and ceramic densification. Consolidation of FGM's was achieved by a short time field-assisted sintering technique. Sintering was performed either at a constant temperature or in a temperature gradient by using punches made of different materials (i.e., one graphite and one tungsten). A temperature gradient of at least 100 °C was required with a low value of 1200 °C at the metal end and exceeding 1300 °C at the ceramic end. Increasing the number of intermediate layers alleviates some of the cracks formed during sintering due to different coefficients of thermal expansion.