Search

Chemical pollution threatens human health and ecosystem sustainability. Persistent organic pollutants (POPs) like per- and polyfluoroalkyl substances (PFAS) are expensive to clean up once emitted. Innovative and synergistic strategies are urgently needed, yet process integration and cost-effectiveness remain challenging. An in-situ PFAS remediation system is developed to employ a plant-derived biomimetic nano-framework to achieve highly efficient adsorption and subsequent fungal biotransformation synergistically. The multiple component framework is presented as Renewable Artificial Plant for In-situ Microbial Environmental Remediation (RAPIMER). RAPIMER exhibits high adsorption capacity for the PFAS compounds and diverse adsorption capability toward co-contaminants. Subsequently, RAPIMER provides the substrates and contaminants for in situ bioremediation via fungus Irpex lacteus and promotes PFAS detoxification. RAPIMER arises from cheap lignocellulosic sources, enabling a broader impact on sustainability and a means for low-cost pollutant remediation.

Introduction To date, there is little research assessing the efficacy of a proximal humeral internal locking system (PHILOS) plate plus an allogeneic fibula inserted obliquely in the treatment of 2-part proximal humerus fractures (PHFs) with calcar comminution in patients >60 years old with severe osteoporosis. The aim of this study was to retrospectively evaluate the outcomes of elderly patients with osteoporotic 2-part PHFs combined with medial column (calcar) instability or disruption who experienced a PHILOS plate plus an allogeneic fibula inserted obliquely. Materials and Methods One hundred and twelve consecutive elderly patients with severe osteoporotic 2-part PHFs combined with calcar instability or disruption who were treated with a PHILOS plate plus an allogeneic fibula inserted obliquely were retrospectively identified from 3 tertiary medical centres during 2014–2019. The primary outcomes were the Constant scores and American Shoulder and Elbow Surgeons (ASES) scores; secondary outcome was the rate of key orthopaedic complications. Results Median follow-up was 24 (15.3–27.6) months. Significant improvements in the median Constant scores were observed (39 [26–58 points] prior to surgery vs 81 [67–95 points] at final follow-up). The median ASES scores improved from 43 (26–64 points) prior to surgery to 83 (65–96 points) at final follow-up. The percentage of key orthopaedic complications was 25.6% (22/86). Four (4.7%) cases had loss of reduction, 4 (4.7%) experienced aseptic loosening, 1 (.8%) had non-union, 4 (4.7%) suffered a periprosthetic fracture, 3 (3.5%) experienced a revision surgery, 1 (.8%) had a dislocation and 5 (5.8%) suffered an unbearable shoulder pain. Conclusion For elderly patients with osteoporotic 2-part PHFs combined with calcar instability or disruption, PHILOS plate combined with an allogeneic fibula inserted obliquely might have recognisable advantages in decreasing the loss of fixation and preventing medial calcar collapse.

This study investigated the role of insulin-like growth factor-1/insulin-like growth factor-1 receptor (IGF-1/IGF-1R) in the genesis and progression of diabetic kidney disease (DKD) in a streptozotocin (STZ)-induced mouse diabetes model. We showed elevated IGF-1 expression in the DKD kidneys after 16 wk of diabetic onset. Intraperitoneal administration of IGF-1R inhibitor (glycogen synthase kinase-3β, GSK4529) from week 8 to week 16 postdiabetes induction ameliorated urinary albumin excretion and kidney histological changes due to diabetes, including amelioration of glomerulomegaly, inflammatory infiltration, and tubulointerstitial fibrosis. The GSK4529 treatment also attenuated alterations in renal tubular expression of E-cad and matrix protein fibronectin. Moreover, renal fibrosis in DKD (without treatment) was associated with Snail1 overexpression that was effectively prevented by IGF-1R inhibition. Further experiments in cultured renal epithelial cells (NRK) showed that IGF-1 silencing reproduced in vivo effects of IGF-1R inhibition with markedly attenuated Snail1 expression and near normalization of the Ecad1 and fibronectin expression pattern. Further Snail1 silencing prevented high-glucose-induced changes without affecting IGF-1 expression, consistent with Snail1 acting downstream to IGF-1. The antifibrotic effects were also shown with benazepril or insulin treatment but to a much lesser degree. In summary, in STZ-induced diabetic mice, activation of IGF-1 in diabetic kidneys induces fibrogenesis through Snail1 upregulation. The diabetes-related histological and functional changes, as well as fibrogenesis, can be attenuated by IGF-1/IGF-1R inhibition.

MnO2 has received immense consideration for supercapacitors; however, its performance in energy storage is limited by its low electroconductivity and agglomeration during the charge-discharge process. This necessitates the fabrication of flexible supercapacitor with excellent electrochemical properties for application in cable-type devices. In the current study, we have fabricated a self-standing carbonized cotton yarn (CCY) and the MnO2-based electrode by using a cotton yarn derived carbon fiber as a substrate. The electrode with hierarchical porous architecture was obtained through a redox reaction between CCY and potassium permanganate (KMnO4). Field emission scanning electron microscopy showed the deposition and uniform distribution of MnO2 nanoparticles on the surface of CCY. The electrode showed excellent capacity performance and electrochemical stability. In the electrode, the combination of MnO2 nanoparticles and CCY offered enhanced kinetics, a large surface area which resulted in high energy density (16.88 μWh/cm2) and high-power density (4770 μW/cm2). Further, the fabricated electrode showed a specific area capacity of 182.94 mF/m2 at 20 mV/s. Moreover, three flexible supercapacitors were connected in series and parallel to get higher working voltage and higher capacity, respectively, which demonstrated its potential for broad-spectrum applications in flexible devices, these results demonstrate the potential of MnO2/CCY for diverse applications in the development of cable-type devices.

Flexible fiber-based supercapacitors applied in portable energy storage devices and wearable electronics have recently aroused widespread research interests. However, challenges still exist in the pursuit of facile fabrication technique for simultaneously realizing high capacitive performance and excellent mechanical stability. Here, two novel types of core-sheathed hybrid electrodes with carbon nanotube fiber (CNF) as the core and three-dimensional (3D) porous carbon nanotubes/polypyrrole (CNTs/PPy) or reduced graphene oxide (rGO) as the sheath were hierarchically constructed through one-pot electrochemical deposition. An all-solid-state asymmetric fiber-shaped supercapacitor was assembled by wrapping the gel electrolyte coated negative CNF/rGO electrode along the positive CNF/CNTs/PPy electrode. Thanks to the combination of abundant 3D pore structure and synergistic effect of different components in the fiber electrodes, the resulted supercapacitors exhibited a broadened potential window of 1.6 V, a high areal specific capacitance of 58.82 mF cm−2 and a high areal energy density of 20.91 μW h cm−2. It should be noted that 98.6% of the initial capacitance of the supercapacitor device can still be maintained after experiencing 200 reciprocating bending cycles, demonstrating outstanding mechanical stability. Moreover, the supercapacitor exhibited excellent cyclic performance, which was testified by 90% capacity retention after 10000 times of galvanostatic charge-discharge process.

The production of ammonia (NH3) in the industrial scale basically relies on the traditional technology of Haber–Bosch, which is operated under harsh conditions with high energy consumption and a hu...

An electrolyte composed of lithium difluoro(oxalate)borate (LiDFOB) as lithium salt, N-propyl-N-methylpiperidinium bis(trifuoromethansulfonyl) imide (PP13TFSI) ionic liquid and dimethylcarbonate (DMC) as co-solvent and fluoroethylene carbonate (FEC) as additive is reported in this study. It is found that the resulted ionic liquid-based electrolyte demonstrates high ionic conductivity, low polarization and high safety performance. The Li/Li1.1Ni0.25Mn0.65O2 and Li/Graphite half-cells with the electrolyte exhibit excellent electrochemical performance, retaining capacities of more than 186 mA h g−1 and 361.6 mA h g−1 after 100 cycles, respectively. Such outstanding energy storage performance is ascribed to the joint oxidative decomposition of LiDFOB and FEC, which can form stable and low impedance solid electrolyte interface (SEI) on the Li-rich cathode and graphite anode. Besides, the SEI layer can prevent transition metal dissolution, enabling excellent cycling stability for the high voltage graphite/Li1.1Ni0.25Mn0.65O2 full cell. As a result, the full cell with the ionic liquid based electrolyte maintains a discharge capacity and capacity retention of 180 mAh g−1 and 87.54% after 100 cycles at 0.5 C and 40 °C, far superior to that obtained for commercial electrolyte. All these characteristics make the electrolyte a promising candidate for safe, high performance lithium-ion battery electrolyte.

Hollow Mo2C@C core-shell nanofibers (H-Mo2C@C/NFs) have been successfully synthesized via an integrated procedure including coaxial electrospinning, oil extraction and carbonization. As an anode of lithium-ion batteries, H-Mo2C@C/NFs delivers high discharge capacity of 1176.3 mA h g−1 in the first cycle at a current density of 0.1 A g−1 and exhibits good rate capability and reversibility. The capacity can maintain at 595.1 mA h g−1 even when the current density is up to 5 A g−1. In addition, at a high current density of 1 A g−1, H-Mo2C@C/NFs also displays extraordinary long-term cycling performance with a capacity of 674.4 mA h g−1. The excellent rate performance and cycling stability result from the synergistic effect of Mo2C nanoparticles and hollow structure nanofiber matrix. Coaxial electrospinning technology can be widely extended to manufacture other metal carbide/carbon composites to achieve important energy storage and other applications.

The continuous attractors of neural networks with symmetric connection weights have been studied widely. However, most of the matrices are asymmetric. In this paper, the model is coupled by some su...

Transition-metal oxides (TMOs) are considered as promising anode materials for lithium ion batteries. However, the poor structural stability and relatively low electronic conductivity greatly limit their application in flexible electronic devices. Herein, a 3D hierarchical high performance MnO-based flexible electrode is fabricated through vacuum-assisted layer-by-layer assembly of 1D polydopamine coated MnO2 nanowires (MnO2@PDA NWs) and 2D graphene oxide nanosheets (GO NSs), followed by a thermal reduction process. The resulting composite (MnO@C-rGO) demonstrates excellent flexibility, structure stability and manifests outstanding lithium storage performance in terms of high reversible capacity (920 mAh g−1 at 0.2 A g−1), excellent rate capability (686 mAh g−1 at 2 A g−1 and 396 mAh g−1 at 10 A g−1) and impressive cycling stability (719 mAh g−1 at 2 A g−1 without fading after 800 cycles), exceeding most of recently reported MnO-based anodes. It is proved that the freestanding flexible MnO@C-rGO anode can be successfully applied in flexible full cell, which achieves superior flexibility and maintains good electrochemical performance during mechanical deformations.

This paper presents an adaptive control based on a tan-type barrier Lyapunov function for time-varying state constrained strict-feedback nonlinear systems to achieve asymptotic output tracking. The...

The synthesis of NH3 heavily relies on the Haber-Bosch process suffering from a large amount of CO2 emission and energy consumption. Possessing eco-friendly and sustainable characteristics, electrochemical reduction is considered as a promising candidate for artificial N2 fixation under ambient conditions, but efficient electrocatalysts are crucial for the N2 reduction reaction (NRR). In this communication, we report that perovskite La2Ti2O7 nanosheets behave as an efficient NRR electrocatalyst with excellent selectivity under ambient conditions. In 0.1 M HCl, this catalyst achieves a high NH3 yield rate of 25.15 μg h-1 mgcat.-1 with a faradaic efficiency of 4.55% at -0.55 V vs. a reversible hydrogen electrode. Notably, it also shows high electrochemical stability.

International audience; Many sulfide-based supercapacitors suffer from the problem of large capacity and energy attenuation at high rates. To tackle this problem, a strong magnetic field (SMF) was exerted twice during new material synthesis and electrode fabrication. Here, one-dimensional (1D) hetero-Zn0.76Co0.24S/Co3S4/β-CoS1.097 hollow sphere nanochains (CZ55S6T) were first prepared via a one-step anion-exchange reaction under SMF. The SMF-induced directional growth of paramagnetic Zn0.76Co0.24S in the outer shell contributed to the directional assembly of the simultaneously hollowing-out spheres into 1D nanochains based on the Kirkendall effect accelerated by SMF. Physicochemical investigations revealed that SMF endowed CZ55S6T with a larger surface area and reduced the loss of active components, especially Zn. The unique 1D hollow nanochain nanostructures contributed to a remarkable rate performance. An oriented CZ55S6T nanochains/graphene flake capacitive electrode (CZ55S6T/G) with high loading (∼8 mg cm−2) was further fabricated using SMF to reduce the path tortuosity. The CZ55S6T/G electrode exhibited strikingly enhanced rate capability with 80% capacitance retention (863.8 F g−1) and cycling capacitance (705 F g−1 after 5000 cycles) at a high rate of 20 A g−1. Furthermore, the CZ55S6T/G-based asymmetric supercapacitor delivered remarkable energy density of 51.5 W h kg−1 at a large power density of 6811 W kg−1.

BACKGROUND: Currently, there is no gold standard for monitoring patients’ intraoperative stress levels under general anesthesia, while excessive stress may affect their postoperative outcomes. This prospective cohort study developed a prediction model using patients’ hemodynamic parameters to predict the change in adrenocorticotropic hormone (ACTH) concentrations, one of the stress hormones, under surgical stimuli to evaluate intraoperative stress levels. METHODS: A total of 205 patients undergoing scheduled open hepatectomy were enrolled in this study to investigate the correlations between ACTH levels and hemodynamic parameters. The ACTH concentration was assessed before surgery (baseline) and 10 minutes after skin incision. Blood pressure (BP) and heart rate (HR) were obtained at baseline and again at 1-minute intervals for 10 minutes after the skin incision. A logistic regression model was built to predict intraoperative stress level based on ACTH fluctuations, using the bootstrapped sampling approach. The model was validated using the internal sample. RESULTS: Three essential variables were used in the prediction model, including two significant variables, namely, baseline ACTH and mean arterial pressure (MAP), and one variable that was close to achieving significance, that is, HR. This model was able to detect 74.9% of patients with predefined unacceptable ACTH changes. The model had an average of area under the curve (AUC) of 0.723 [95% confidence interval (CI): 0.657–0.791]. CONCLUSIONS: The model developed herein may be a potential practical method for predicting intraoperative stress levels. This prediction model may be a preliminary step to building a real-time stress model based on routine monitoring during general anesthesia, needing further validations in an external sample.

Biomass derived porous carbons are economic and attractive materials for anode electrodes in sodium-ion batteries. In this work, a novel porous carbon has been prepared through activation of longan shell, which demonstrates an interconnected hierarchical porosity comprised of macro-, meso- and micro-pores as well with a high specific surface area of 2990 m2 g−1. Benefiting from the unique pore structure and oxygen and nitrogen dual doping, a well-developed ionic and electronic conductivity is achieved. Remarkably, it exhibits an excellent cycling stability with a capacity up to 345.9 mAh g−1 at a current density of 0.1 A g−1, and maintains a capacity of 304.2 mAh g−1 even at a high current density of 5 A g−1 after 1000 cycles as anodes for sodium-ion batteries. These results indicate that the fabricated porous carbon could be a promising electrode material for sodium-ion batteries. The mechanism of such high sodium-ion storage was also discussed with the scan-rate-dependent CV curves to quantify the pseudo-capacitive contribution.

Heat-resistant supercapacitors with excellent mechanical strength are highly required for flexible and wearable electronics in our daily life. Here, high-performance and heat-resistant solid-state supercapacitors based on poly(

Polycomb group (PcG) proteins are crucial chromatin regulators during development. H2Aub and H3K27me3 are catalyzed by Polycomb-repressive Complex 1 and 2 (PRC1/2) respectively, and largely overlap in the genome due to mutual recruitment of the two complexes. However, whether PRC1/H2Aub and PRC2/H3K27me3 can function independently remains obscure. Here we uncovered a genome-wide decoupling of H2Aub and H3K27me3 in preimplantation mouse embryos, at both canonical PcG targets and broad distal domains. H2Aub represses future bivalent genes without H3K27me3 but does not contribute to maintenance of H3K27me3-dependent non-canonical imprinting. Our study thus revealed their distinct and independent functions in early mammalian development.

Cyclization reaction of poly(acrylonitrile-co-2-acrylamido-2-methylpropane sulfonic acid) [P(AN-co-AMPS)] copolymer during thermal oxidative stabilization (TOS) process was investigated by FTIR and two dimensional (2D) correlation analysis technique. The results showed the mechanism of cyclization reaction at different temperatures were varying. At 200 °C, the cyclization reactions generated by autocatalytic cyclization mechanism. While at higher temperatures, the cyclization reactions took place through ionic cyclization mechanism and free radical cyclization mechanism. The AMPS comonomer could reduce the heat release of cyclization reactions and improve the stability at 200 and 230 °C. At higher temperatures, the cyclization reactions were facilitated rapidly. However, the oxidation and degradation reactions were also intense, which will cause the molecular chain to break and defects in the final carbon fibers (CFs). This research has theoretical guiding significance for the optimization of heat treatment conditions for PAN copolymers used as CFs.

Supplemental material, sj-pdf-1-imr-10.1177_0300060521999739 for Accuracy of half-way mucosa-supported implant guides for edentulous jaws: a retrospective study with a median follow-up of 2 years by Weiwei Tang, Qilong Liu, Xianshang Zeng, Jiali Yu, Dalong Shu, Guorong Shen, Weiguang Yu, Xiangzhen Liu and Guixing Xu in Journal of International Medical Research

Background. Anxious people appear to exaggerate the severity of aversive experiences such as anxiety and pain. Anxiety towards dental procedures is a common difficulty that may be experienced by dental patients all over the world. The goal of the study is to find out the prevalence of dental anxiety and its associated factors in Chinese adult patients. Methods. A cross-sectional study was conducted on 183 dental adult patients whose age ranged from 18 to 70 years. Demographic details, first and most recent dental visits with experience, the MDAS, and the Visual Analogue Scale for Anxiety (VAS-A) were obtained. Data were analyzed by frequency analysis, chi-square test, and Spearman correlation test. Results. Most of the respondents were female (68.9%) and 30–45 years age group. The mean total score for dental anxiety on the MDAS was 13.63 (3.1). 80.3% of participants suffered from moderate or high dental anxiety. Age must show a strong association with dental anxiety among the participants ( p = 0.011 ). The first dental visit experience, the frequency of the dental visit, most recent dental experience, length of time since the most recent dental visit, and postponement of the dental visit are strongly associated with the MDAS score ( p = 0.001 ). Conclusions. The MDAS score exhibits that Chinese adult patients have significant dental anxiety and phobia. Identifying patients with dental anxiety as soon as possible is essential to providing better dental care.

Increasing testing capacities plays a substantial role in safely reopening the economy and avoiding a new wave of COVID-19. Pooled testing can expand testing capabilities by pooling multiple individual samples, but it also raises accuracy concerns. In this study, we propose a flexible testing strategy that adopts pooled testing or individual testing according to epidemic dynamics. We identify the prevalence threshold between individual and pooled testing by modeling the expected number of tests per confirmed case. Incorporating an epidemic model, we show pooled testing is more effective in containing epidemic outbreaks and can generate more reliable test results than individual testing because the reliability of test results is relevant to both testing methods and prevalence. Our study is the first to evaluate the interplay between pooled testing and a rapidly evolving outbreak to the best of our knowledge. Our results allay accuracy concerns about pooled testing and provide theoretical supports to empirical studies.

Aim. To assess the rational use of drugs and the pattern of prescribing of analgesics and antibiotics for dental management and the information given by dentists in Guangzhou to their patients about the use of these drugs. Methods. A questionnaire was distributed to 225 dentists working in Guangzhou. The questionnaires consisted of open-ended questions and were given to dentists about analgesic and antibiotic use in dentistry. The questionnaires were analyzed, and absolute frequencies were expressed in the answers to each question. The cases, the analgesics, and the antibiotics recommended by the dentists for each case were determined by the frequency analysis method of descriptive statistics. Results. Responses to the questionnaire were received from 164 (72.9%) dentists. Paracetamol and diclofenac were the most widely prescribed analgesics. It is also estimated that selective COX-2 inhibitors or opioid analgesics have not been administered by dentists. The antibiotics primarily used for treatment were amoxicillin and metronidazole, and amoxicillin was used for prophylaxis. While more than 80% of dentists indicated that they provided their patients with information on the use of antibiotics, the quality of the information was limited. Patients were primarily instructed by dentists to observe the dosage and dose intervals of the prescription drugs. Conclusions. The results of the present study demonstrated that dentists most commonly prescribe paracetamol and diclofenac as analgesics, amoxicillin, and metronidazole for the therapy of periodontal, endodontic, and surgical procedures. The results also showed that dentists informed their patients inadequately about analgesic and antibiotic use.

SUMMARYThe 3D genome organization is crucial for gene regulation. Although recent studies have revealed a uniquely relaxed genome conformation in totipotent early blastmeres of both fertilized and cloned embryos, how weakened higher-order chromatin structure is functionally linked to totipotency acquisition remains elusive. Using low-input Hi-C, ATAC-seq, and ChIP-seq, we systematically examined the dynamics of 3D genome and epigenome during pluripotency-to-totipotency transition in mouse embryonic stem cells (ESCs). The totipotent 2-cell-embro-like cells (2CLCs) exhibit more relaxed chromatin architecture compared to ESCs, including global weakening of both enhancer-promoter interactions and TAD insulation. While the former leads to inactivation of ESC enhancers and down-regulation of pluripotent genes, the latter may facilitate contacts between the new enhancers arising in 2CLCs and neighboring 2C genes. Importantly, disruption of chromatin loops by depleting CTCF or cohesin promotes ESC to 2CLC transition. Our results thus establish a critical role of 3D genome organization in totipotency acquisition.HIGHLIGHTSGlobal weakening of the 3D genome conformation during ESC to 2CLC transitionLoss of enhancer-promoter loops and down-regulation of pluripotent genes in 2CLCsInactivation of ESC enhancers and formation of new enhancers in 2CLCsDisruption of chromatin loops by depleting CTCF or cohesin promotes 2CLC emergence

Graph neural networks (GNNs) are gaining increasing popularity as a promising approach to machine learning on graphs. Unlike traditional graph workloads where each vertex/edge is associated with a scalar, GNNs attach a feature tensor to each vertex/edge. This additional feature dimension, along with consequently more complex vertex- and edge-wise computations, has enormous implications on locality and parallelism, which existing graph processing systems fail to exploit. This paper proposes FeatGraph to accelerate GNN workloads by co-optimizing graph traversal and feature dimension computation. FeatGraph provides a flexible programming interface to express diverse GNN models by composing coarse-grained sparse templates with fine-grained user-defined functions (UDFs) on each vertex/edge. FeatGraph incorporates optimizations for graph traversal into the sparse templates and allows users to specify optimizations for UDFs with a feature dimension schedule (FDS). FeatGraph speeds up end-to-end GNN training and inference by up to 32x on CPU and 7x on GPU., Comment: SC'20; changed all figures to type 1

MXene, as an attractive functional and structural material with high conductivity, wettability, surface activity and plenty of superior mechanical properties, is applied for the first time to directly decorate ultra-high molecular weight polyethylene fiber (UHMWPE) and fabrics with a unique bovine serum albumin (BSA)-induced technology. The adoption of BSA successfully turns UHMWPE fiber into an adhesive platform toward the efficient assembly and wrapping of MXene. The results showed that the functionalization of MXene changed the UHMWPE fiber surface topography and increased the wettability and surface activity, which can enhance the mechanical engagement and offer sufficient reactive sites with resin matrix, providing efficiently improved interfacial properties. The interfacial shear strength between the UHMWPE/BSA/MXene fiber and epoxy increased by 116% when compared with pristine UHMWPE fiber. Besides, the peeling strength of MXene decorated UHMWPE fabric/rubber laminate demonstrates more than two times higher than the untreated UHMWPE fabric reinforced rubber composite. Furthermore, with the excellent conductivity of MXene, the UHMWPE/BSA/MXene fiber exhibits an electrical conductivity of 106 S/m, which is able to work as a conductor for the application of electronic textiles.

Forest tree species are increasingly subject to severe mortalities from exotic pests, pathogens, and invasive organisms, accelerated by climate change. Such forest health issues are threatening multiple species and ecosystem sustainability globally. One of the most extreme examples of forest ecosystem disruption is the extirpation of the American chestnut (Castanea dentata) caused by the introduction of chestnut blight and root rot pathogens from Asia. Asian species of chestnut are being employed as donors of disease resistance genes to restore native chestnut species in North America and Europe. To aid in the restoration of threatened chestnut species, we present the assembly of a reference genome for Chinese chestnut (C. mollissima) "Vanuxem," one of the donors of disease resistance for American chestnut restoration. From the de novo assembly of the complete genome (725.2 Mb in 14,110 contigs), over half of the sequences have been anchored to the 12 genetic linkage groups. The anchoring is validated by genetic maps and in situ hybridization to chromosomes. We demonstrate the value of the genome as a platform for research and species restoration, including signatures of selection differentiating American chestnut from Chinese chestnut to identify important candidate genes for disease resistance, comparisons of genome organization with other woody species, and a genome-wide examination of progress in backcross breeding for blight resistance. This reference assembly should prove of great value in the understanding, improvement, and restoration of chestnut species. Forest Health Initiative [137RFP, 2008-011]; United States Department of Agriculture (USDA) National Institute of Food and AgricultureUnited States Department of Agriculture (USDA) [2016-67013-24581]; USDA National Institute of Food and Agriculture Federal Appropriations [PEN04532, 1000326, NE-1833]; Foundation for the Carolinas; National Science Foundation (NSF)National Science Foundation (NSF) [1444573]; NSF Postdoctoral Research Fellowships in Biology Grant [1711950]; Institutional Development Award (IDeA) from the National Institute of GeneralMedical Sciences of the National Institutes of HealthUnited States Department of Health & Human ServicesNational Institutes of Health (NIH) - USA [P20GM109094]; American Chestnut Foundation This project was funded by the Forest Health Initiative (https://foresthealthinitiative.org/) through grant #137RFP#2008-011 to JEC. Support was also provided by the United States Department of Agriculture (USDA) National Institute of Food and Agriculture grant 2016-67013-24581 to The American Chestnut Foundation. Additional support was provided through several grants-inaid to JEC fromThe American Chestnut Foundation and to JEC andMES through the USDA National Institute of Food and Agriculture Federal Appropriations under Project PEN04532 (Accession number 1000326) and NE-1833, respectively. Construction of saturated genetic maps and root RNAseq dataset was partially supported by the Foundation for the Carolinas. Bioinformatics was supported by National Science Foundation (NSF) Award #1444573, "Standards and Cyberinfrastructure that Enable 'Big-Data' Driven Discovery for Tree Crop Research" (MES; PI Main). Emily Bellis was supported by NSF Postdoctoral Research Fellowships in Biology Grant No. 1711950. Rooksana Noorai was supported by an Institutional Development Award (IDeA) from the National Institute of GeneralMedical Sciences of the National Institutes of Health under grant number P20GM109094. Public domain – authored by a U.S. government employee

Summary Immunotherapy induces durable clinical responses in a fraction of patients with cancer. However, therapeutic resistance poses a major challenge to current immunotherapies. Here, we identify that expression of tumor stanniocalcin 1 (STC1) correlates with immunotherapy efficacy and is negatively associated with patient survival across diverse cancer types. Gain- and loss-of-function experiments demonstrate that tumor STC1 supports tumor progression and enables tumor resistance to checkpoint blockade in murine tumor models. Mechanistically, tumor STC1 interacts with calreticulin (CRT), an "eat-me" signal, and minimizes CRT membrane exposure, thereby abrogating membrane CRT-directed phagocytosis by antigen-presenting cells (APCs), including macrophages and dendritic cells. Consequently, this impairs APC capacity of antigen presentation and T cell activation. Thus, tumor STC1 inhibits APC phagocytosis and contributes to tumor immune evasion and immunotherapy resistance. We suggest that STC1 is a previously unappreciated phagocytosis checkpoint and targeting STC1 and its interaction with CRT may sensitize to cancer immunotherapy.

UNSTRUCTURED Introduction: The emergence of coronaviruses, including SRAS-CoV and SARS-CoV-2, is thought to be a pandemic threat to human beings and has aroused considerable academic concern worldwide. The aim of this study was to map research productivity and explore the characteristics of global literatures from SARS to the emerging COVID-19. Methods: Thomson Reuters Web of Science was searched to retrieve 12632 articles related to coronavirus between 1991 and 2020, 2701 articles concerning SARS dated from 2002 to 2020 March, 566 articles corresponded to COVID-19 published by 2020 March. The parameters using VOSviewer and CiteSpaceV. Results: In SARS research field, the most prolific country was China (1115 articles; 41.2%), followed by USA (816; 30.2%). The top 3 most published institutes were University of Hong Kong, Chinese Academy of Sciences, Chinese University of Hong Kong. The authors with greatest numbers of publications was Yuen KY (78 articles), followed by Peiris JSM (73 articles) and Chan PKS (65 articles). “identification”, “infection”, “outbreak” and “spike protein” were found to be among the most frequently used topics. While articles relevant to COVID-19 were most published in China (43.29%) and USA (17.67%), with Fudan University being the most productive (4.06%). LANCET was the most exploited journal (IF 59.102). Besides, the most highly cited publications and co-citation reference were also unmasked from this bibliometric analysis. Conclusions: The findings will provide valuable information for current researchers to learn from the study experience and find effective strategies for COVID-19 control as soon as possible.

In recent years, research on a special class of frames, named K-frames where K is an operator, has become significant in theory and applications. Since the finite sum of K-frames may not be a K-frame for the Hilbert space, in this paper, we discuss the sum and stability of K-frames in Hilbert spaces. First, we obtain some sufficient conditions for the finite sum of a K-frame and a Bessel sequence to be a K-frame. Then we get the K-dual of the sum of K-frames by the dual of the original K-frames. In particular, we give some new results about the operator K and the analysis operator in the discussion. Moreover, we discuss the stability of K-frames and get some conclusions.

During mammalian oocyte growth, chromatin configuration transition from the nonsurrounded nucleolus (NSN) to surrounded nucleolus (SN) type plays a key role in the regulation of gene expression and acquisition of meiotic and developmental competence by the oocyte. Nonetheless, the mechanism underlying chromatin configuration maturation in oocytes is poorly understood. Here we show that nucleolar protein DCAF13 is an important component of the ribosomal RNA (rRNA)-processing complex and is essential for oocyte NSN-SN transition in mice. A conditional knockout of Dcaf13 in oocytes led to the arrest of oocyte development in the NSN configuration, follicular atresia, premature ovarian failure, and female sterility. The DCAF13 deficiency resulted in pre-rRNA accumulation in oocytes, whereas the total mRNA level was not altered. Further exploration showed that DCAF13 participated in the 18S rRNA processing in growing oocytes. The lack of 18S rRNA because of DCAF13 deletion caused a ribosome assembly disorder and then reduced global protein synthesis. DCAF13 interacted with a protein of the core box C/D ribonucleoprotein, fibrillarin, i.e., a factor of early pre-rRNA processing. When fibrillarin was knocked down in the oocytes from primary follicles, follicle development was inhibited as well, indicating that an rRNA processing defect in the oocyte indeed stunts chromatin configuration transition and follicle development. Taken together, these results elucidated the in vivo function of novel nucleolar protein DCAF13 in maintaining mammalian oogenesis.

This paper deals with the initial boundary value problem for the nonlinear beam equation with double damping terms $$\begin{aligned} u_{tt}-u_{xxt}+u_{xxxx}+u_{xxxxt}=g(u_{xx})_{xx}, \quad x\in\Omega, t>0, \end{aligned}$$ where $\Omega=(0,1)$ , and $g(s)$ is a given nonlinear function. We derive sufficient conditions for the blow-up of the solution to the problem by virtue of an adapted concavity method. In addition, global existence of weak solutions as well as exponential and uniform decay rates of the solution energy are established by the use of an integral inequality.

Advanced ionic liquid-based electrolyte is herein characterized for the application in high voltage lithium-ion batteries. The electrolyte based on N-propyl-N-methylpiperidiniumdifluoro(oxalate)borate (PP13DFOB), lithium bis(trifluoromethanesulfonyl)-imide (LiTFSI) and dimethyl carbonate (DMC) is fully characterized in terms of anodic corrosion behavior, electrochemical properties and cathode-electrolyte interphase stability. Experimental and computational results show that the preferential oxidation of PP13DFOB results in a stable and low impedance solid electrolyte interface (SEI) film on the surface of LiNi0.5Mn1.5O4 (LNMO) cathode and a passivation layer on Al foil, which suppress transition metal dissolution and Al corrosion at high voltage. As a result, the Li/LNMO and Li/graphite coin cells with ionic liquid-based electrolyte achieve excellent electrochemical performance, displaying a discharge capacity of 121.2 mAh g−1 and 369.2 mAh g−1 after 100 cycles at 0.5 C respectively and demonstrating no distinct capacitance attenuation during charge-discharge cycles.

The avian pectoralis muscle is responsible for the wing's downstroke, which provides birds with lift and thrust for flight. In the present study, architectural parameters were investigated through growth in the pigeon (Columba livia), an altricial bird species, from the ages of 4 days to 12 months, in order to assess the morphological changes and effects of increasing body mass. Muscle mass, fascicle length (FL), and physiological cross-sectional area (PCSA) increased with strong positive allometry. As an indicator of force production capacity, the PCSA increased 30-fold with the changes in body mass; it grew rapidly during the nesting period and post-fledging period into sexual maturity. The growth pattern of FL demonstrated a gradual increase before fledging and a marked increase after maturity. Taken together, the growth of the pectoralis was found to be dominated by a continuous increase in PCSA before maturity and subsequent increase in FL. These features were associated with the establishment and improvement of flight capability, and further revealed different strategies in maintaining relatively constant power prior to and after maturity. Anat Rec, 301:1564-1569, 2018. © 2018 Wiley Periodicals, Inc.

Acrylic fiber is one of three important synthetic fibers in the world. The disposal and reuse of large number of waste acrylic fibers from fabric manufacturers or waste recovery is an urgent economic and environmental issue. Here, a porous carbon was derived from waste acrylic fibers via pre-oxidized, carbonization and KOH activation. Furthermore, we adopted melamine as nitrogen source to dope the porous carbon materials. When used as the anode of lithium ion batteries, this nitrogen-doped porous carbon shows high reversible capacity of ca. 1200 mA h g−1 after 50 cycles at 0.1 A g−1. Reversible capacities of 550 and 370 mA h g−1 are obtained at higher current densities of 1 and 5 A g−1 after 500 cycles, respectively. The outstanding electrochemical performance are a result of its large mesopore volume, high-level N-doping (especially, pyridinic-N), large quantity of edge defects, and three-dimensional hierarchical porous architecture. This paper demonstrates that the reuse of waste industrial acrylic fibers as energy storage materials is a promising method for both energy and environmental fields.

In the present work, a new strategy is proposed to simultaneously enhance the toughness and electrochemical performance of the hydrogel with conductive microgel to form microgel-reinforced double network hydrogel. In this hydrogel, the conductive microgel is cross-linked to form the first network, which can dissipate energy to improve mechanical performance and stabilize the conductive network to improve the electrochemical performance. These hydrogels show excellent mechanical properties and good conductivity. When these hydrogels are assembled to all-gel-state intrinsically flexible and stretchable supercapacitor, they deliver outstanding capacitance. The strategy put forward here can extend the application scope of the hydrogel with multifunction.

Transition-metal oxide materials have gained significant attention as high-performance anode materials for lithium ion batteries. Great advances have been achieved in the development of micro/nanostructured materials with controllable shape and tunable pore size. In this work, a facile co-precipitation approach has been developed to fabricate the Ni-NiCo2O4@ZnCo2O4 yolk-shell nano-tetrahedron composites, which significantly improve the structural stability and conductivity of the material. The Ni-NiCo2O4@ZnCo2O4 is proven to exhibit excellent cycling and rate performance for lithium ion batteries, such as the charge capacity of 1571.9 mA h g−1 after 70 cycles at 0.1 A g−1, 1097.5 mA h g−1 after 600 cycles at 1.0 A g−1. This superior electrochemical performance may attribute to the yolk-shell architecture and the Ni-doping.

The rational structure design and strong interfacial bonding are crucially desired for high performance zinc oxide (ZnO)/carbon composite electrodes. In this context, micro-nano secondary structure design and strong dopamine coating strategies are adopted for the fabrication of flower-like ZnO/carbon (ZnO@C nanoflowers) composite electrodes. The results show the ZnO@C nanoflowers (2–6 μm) are assembled by hierarchical ZnO nanosheets (∼27 nm) and continuous carbon framework. The micro-nano secondary architecture can facilitate the penetration of electrolyte, shorten lithium ions diffusion length, and hinder the aggregation of the nanosheets. Moreover, the strong chemical interaction between ZnO and coating carbon layer via C-Zn bond improves structure stability as well as the electronic conductivity. As a synergistic result, when evaluated as lithium ion batteries (LIBs) anode, the ZnO@C nanoflower electrodes show high reversible capacity of ca. 1200 mA h g−1 at 0.1 A g−1 after 80 cycles. As well as good long-cycling stability (638 and 420 mA h g−1 at 1 and 5 A g−1 after 500 cycles, respectively) and excellent rate capability. Therefore, this rational design of ZnO@C nanoflowers electrode is a promising anode for high-performance LIBs.

It has been found that the research of a special kind of frames, named $K$ -frames where $K$ is an operator, is significant in theory and application. In this paper, first of all, in theory, we discuss some properties about the existence and structure of the $K$ -frames and the relationship between operator $K$ and $K$ -frames. And these properties provide a method to construct $K$ -frames in the following text. Next, in application, in order to use $K$ -frames to deal with the data erasures of communication, we establish a probability model. Based on this probability model and the above-mentioned properties of $K$ -frames, we construct a probability uniform Parseval $K$ -frame, such that its canonical dual is the unique probability optimal dual when $\|Kf\|\setminus \|f\| =c$ and $\|K^{+}f\|\setminus \|f\| =a$ , where both $a$ and $c$ are constants, where $K^{+}$ is the pseudoinverse for $K$ . We use $\|f\|$ to represent the norm of $f$ , where $f$ is any vector in Hilbert space. Moreover, the existence of the probability uniform Parseval $K$ -frame is discussed and then uses it to handle the problem of data erasures. Furthermore, we obtain the conditions for operator $K$ to form the $K$ -frame, which lead to the reduction of restrictions on frame sequences, and make the construction become more flexible compared with traditional frames in coding. Finally, we use three figures obtained by numerical experiments to compare the decoding effects.

Iron sulfides, as promising anode materials, have been intensively studied, but still encounter problems due to their limited cycle life caused by huge volume changes. In the present work, a facile method has been presented to prepare Fe2O3 nanobiscuits followed by poly(dopamine) coating. After thermally induced sulfurization, Fe7S8@C nanobiscuits have been successfully obtained, which show high specific capacities, excellent rate capabilities and stable cycling stability as anodes for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). They exhibit high reversible capacities of 547.3 mA h g−1 after 600 cycles and 530.8 mA h g−1 after 1000 cycles at a high current density of 5 A g−1 for LIBs and SIBs, respectively. This outstanding electrochemical performance may be attributed to the stress-buffering effect owing to the biscuit-like nanostructure and conformal surface coating with carbon.

This paper concerns with the Cauchy problem for two classes of nonlinear hyperbolic equations with double damping terms. Firstly, by virtue of the Fourier transform method, we prove that the Cauchy problem of a class of high order nonlinear hyperbolic equation admits a global smooth solution $u(x, t)\in C^{\infty}((0, T]; H^{\infty}(\mathbb{R}))$$\bigcap C([0, T]; H^{3}(\mathbb{R}))$$\bigcap C^{1}([0, T]; H^{-1}(\mathbb{R}))$ as long as initial value $u_{0}\in W^{4, 1}(\mathbb{R})\bigcap H^{3}(\mathbb{R}), u_{1}\in L^{1}(\mathbb{R})\bigcap H^{-1}(\mathbb{R})$. Moreover, we give the sufficient conditions on the blow-up of the solution of a nonlinear damped hyperbolic equation with the initial value conditions in finite time and an example.

In terms of enhancing the energy storage performance of flexible MXene electrode, both heteroatom doping and introducing electroactive “spacers” are proved to be effective strategies. In this work, a facial protective hydrothermal method is explored to synthesis nitrogen doped porous MXene/TiO2 heterostructure in one pot, which enables a well preserved conductivity of porous N-doped MXene and controlled in-situ generation of uniformly dispersed electroactive TiO2 spacers. This unique hybridized structure provides a chance to integrate several physical and chemical advantages in a complementary easy way. As a result, the assembled freestanding film electrode based on the N-doped porous MXene/TiO2 heterogeneous layers demonstrates excellent energy storage performance with an outstanding specific capacitance value of 2194.33 mF cm−2 (918.69 F g−1), which outperforms most of the heteroatom-doped MXene electrodes reported previously. Besides, the film electrode delivers excellent cycling performance with a 74.39% capacitance retention after 10,000 cycles and the as fabricated flexible supercapacitor displays almost no changes on capacitive performance when subjected to mechanical deformations, indicating its excellent flexibility and stability. This work presents a simple way of modifying MXene with N doping and inserting “spacer” for enhancing the electrochemical performance, and builds up an exciting potential for applying to highly flexible and integrated energy storage devices.