Search

Advanced analytical applications require smart materials and sensor systems that are able to adapt or be configured to specific tasks. Based on reversible photochemistry in nanoporous materials, we present a sensor array with a selectivity that is reversibly controlled by light irradiation. The active material of the sensor array, or electronic nose (e-nose), is based on metal-organic frameworks (MOFs) with photoresponsive fluorinated azobenzene groups that can be optically switched between their trans and cis state. By irradiation with light of different wavelengths, the trans - cis ratio can be modulated. Here we use four trans - cis values as defined states and employ a four-channel quartz-crystal microbalance for gravimetrically monitoring the molecular uptake by the MOF films. We apply the photoprogrammable e-nose to the sensing of different volatile organic compounds (VOCs) and analyze the sensor array data with simple machine-learning algorithms. When the sensor array is in a state with all sensors either in the same trans - or cis -rich state, cross-sensitivity between the analytes occurs and the classification accuracy is not ideal. Remarkably, the VOC molecules between which the sensor array shows cross-sensitivity vary by switching the entire sensor array from trans to cis . By selectively programming the e-nose with light of different colors, each sensor exhibits a different isomer ratio and thus a different VOC affinity, based on the polarity difference between the trans - and cis -azobenzenes. In such photoprogrammed state, the cross-sensitivity is reduced and the selectivity is enhanced, so that the e-nose can perfectly identify the tested VOCs. This work demonstrates for the first time the potential of photoswitchable and thus optically configurable materials as active sensing material in an e-nose for intelligent molecular sensing. The concept is not limited to QCM-based azobenzene-MOF sensors and can also be applied to diverse sensing materials and photoswitches., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Graphene is inherently sensitive to vicinal dielectrics and local charge distributions, a property that can be probed by the position of the Dirac point in graphene field-effect transistors. Exploiting this as a useful sensing principle requires selectivity; however, graphene itself exhibits no molecule-specific interaction. Complementarily, metal-organic frameworks can be tailored to selective adsorption of specific molecular species. Here, a selective ethanol sensor is demonstrated by growing a surface-mounted metal-organic framework (SURMOF) directly onto graphene field-effect transistors (GFETs). Unprecedented shifts of the Dirac point, as large as 15 V, are observed when the SURMOF/GFET is exposed to ethanol, while a vanishingly small response is observed for isopropanol, methanol, and other constituents of the air, including water. The synthesis and conditioning of the hybrid materials sensor with its functional characteristics are described and a model is proposed to explain the origin, magnitude, and direction of the Dirac point voltage shift. Tailoring multiple SURMOFs to adsorb specific gases on an array of such devices thus generates a versatile, selective, and highly sensitive platform for sensing applications., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

The ability to dynamically control chirality remains a grand challenge in chemistry. Although many molecules possess chiral isomers, lacking their isolation, for instance during photoisomerization, results in racemic mixtures with suppressed enantiospecific chiral properties. Here, we present a nanoporous solid in which chirality and enantioselective enrichment is induced by circularly polarized light (CPL). The material is based on photoswitchable fluorinated azobenzenes attached to the scaffold of a crystalline metal-organic framework (MOF). The azobenzene undergoes trans -to- cis -photoisomerization upon irradiation with green light and reverts back to trans upon violet light. While each moiety in cis conformation is chiral, we show the trans isomer also possesses a nonplanar, chiral conformation. During photoisomerization with unpolarized light, no enantiomeric enrichment is observed and both isomers, R - and S - cis as well as R- and S - trans , respectively, are formed in identical quantities. In contrast, CPL causes chiral photoresolution, resulting in an optically active material. Right-CPL selectively excites R - cis and R - trans enantiomers, producing a MOF with enriched S -enantiomers, and vice versa . The induction of optical activity is reversible and only depends on the light-handedness. As shown by first-principle DFT calculations, while both, trans and cis , are stabilized in nonplanar, chiral conformations in the MOF, the trans isomer adopts a planar, achiral form in solution, as verified experimentally. This shows that the chiral photoresolution is enabled by the linker reticulation in the MOF. Our study demonstrates the induction of chirality and optical activity in solid materials by CPL and opens new opportunities for chiral resolution and information storage with CPL.

Metal-organic framework (MOF)-based separators in Li-ion batteries (LIBs) have the potential to improve the battery performance. The mobility and conduction of lithium and organic ionic liquids (ILs) in these materials acting as (quasi) solid-state electrolytes are crucial for the battery power output. Here, we investigate the mobility of a Li-based IL in MOF nanopores and unveil the details of the conduction mechanism by molecular dynamics (MD) simulations. A complex conductivity depending on the Li-IL loading and on the IL composition is observed. Most importantly, the presence of Li prevents the collapse of the conductivity at high IL loadings. The fully atomistic MD simulations including guest-guest and guest-host interactions elucidate the competing mechanisms: Li follows a Grotthuss-like conduction mechanism with large mobility. While at small pore fillings, the Li conduction is limited by the large distance between the anions facilitating the Grotthuss-like conduction; the conduction at high pore fillings is governed by field-induced concentration inhomogeneities. Because of the small MOF pore windows, which hinders the simultaneous passage of the large IL cations and anions in opposite directions, the IL shows field-induced MOF pore blocking and ion bunching. The regions of low anion concentration and high cation concentration represent barriers for Li, decreasing its mobility. In comparison to Li-free IL, the IL bunching effect is attenuated by the formation of charge-neutral Li-anion complexes, resulting in a tremendously increased conductivity at maximum pore filling. The exploitation of this mechanism may enhance the development of advanced batteries based on IL and nanoporous separators.

Metal-organic frameworks (MOFs) have unique properties which make them perfectly suited for various adsorption and separation applications; however, their uses and efficiencies are often hindered by their limited stability. When most MOFs are exposed to water or humid air, the MOF structure, in particular at the surface, is destroyed, creating surface defects. These surface defects are surface barriers which tremendously hinder the uptake and release of guest molecules and, thus, massively decrease the performance in any application of MOFs. Here, the destruction by exposure to water vapor is investigated by using well-defined MOF films of type HKUST-1 as a model system for uptake experiments with different-sized probe molecules as well as for spectroscopic investigations, complemented by density functional theory calculations of the defect structure. In addition to the characterization of the surface defects, it is found that the pristine MOF structure can be regenerated. We show that the surface defects can be dissolved by exposure to the synthesis solvent, here ethanol, enabling fast uptake and release of guest molecules. These findings show that the storage of MOF materials in a synthesis solvent results in healing of surface defects and enables ideal performance of MOF materials.

We investigated if blood flow restriction (BFR, cuff pressure 20 mmHG below individual occlusion pressure) increases metabolic stress, hormonal response, release of muscle damage markers, and muscle swelling induced by moderate-intensity eccentric contractions. In a randomized, matched-pair design, 20 male subjects (25.3 ± 3.3 years) performed four sets of unilateral eccentric knee extensions (75% 1RM) to volitional failure with (IG) or without (CG) femoral BFR. Despite significant differences of performed repetitions between IG (85.6 ± 15.4 repetitions) and CG (142.3 ± 44.1 repetitions), peak values of lactate (IG 7.0 ± 1.4 mmol l -1 , CG 6.9 ± 2.7 mmol l -1 ), growth-hormone (IG 4.9 ± 4.8 ng ml -1 , CG 5.2 ± 3.5 ng ml -1 ), insulin-like growth factor 1 (IG 172.1 ± 41.9 ng ml -1 , CG 178.7 ± 82.1 ng ml -1 ), creatine-kinase (IG 625.5 ± 464.8 U l -1 , CG 510.7 ± 443.5 U l -1 ), the absolute neutrophil count (IG 7.9 ± 1.3 10 3  µl -1 , CG 8.7 ± 2.0 10 3  µl -1 ), induced muscle swelling of rectus femoris and vastus lateralis and perceived pain did not differ. The present data indicate that BFR is suitable to intensify eccentric exercises.

As in the case of other semiconducting materials, optical and electronic properties of metal-organic frameworks (MOFs) depend critically on defect densities and defect types. We demonstrate here that, in addition to the influence of imperfections on MOF chemical properties like guest binding energies and catalytic activity, the optical properties of these crystalline molecular solids also crucially depend on deviations from the perfect crystalline structure. By recording UV-vis absorption spectra for MOF thin films of particularly high quality, we demonstrate that low-defect samples of an important MOF, HKUST-1, are virtually colorless. Electronic structure calculations of the excited states by employing complete active space self-consistent field (CASSCF) calculations show that the d-d excitations in defects result in the typical green color of the MOF material synthesized by conventional methods.

Metal-organic frameworks offer tremendous potential for efficient separation of molecular mixtures. Different pore sizes and suitable functionalizations of the framework allow for an adjustment of the static selectivity. Here we report membranes which offer dynamic control of the selectivity by remote signals, thus enabling a continuous adjustment of the permeate flux. This is realized by assembling linkers containing photoresponsive azobenzene-side-groups into monolithic, crystalline membranes of metal-organic frameworks. The azobenzene moieties can be switched from the trans to the cis configuration and vice versa by irradiation with ultraviolet or visible light, resulting in a substantial modification of the membrane permeability and separation factor. The precise control of the cis:trans azobenzene ratio, for example, by controlled irradiation times or by simultaneous irradiation with ultraviolet and visible light, enables the continuous tuning of the separation. For hydrogen:carbon-dioxide, the separation factor of this smart membrane can be steplessly adjusted between 3 and 8.

Diffusion in nanoporous host-guest systems is often considered to be too complicated to comply with such "simple" relationships as Fick's first and second law of diffusion. However, it is shown herein that the microscopic techniques of diffusion measurement, notably the pulsed field gradient (PFG) technique of NMR spectroscopy and microimaging by interference microscopy (IFM) and IR microscopy (IRM), provide direct experimental evidence of the applicability of Fick's laws to such systems. This remains true in many situations, even when the detailed mechanism is complex. The limitations of the diffusion model are also discussed with reference to the extensive literature on this subject., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Easy come, easy go? Transport resistances on particle surfaces are important for mass transfer in nanoporous materials and bulk diffusion in crystals. Interference microscopy and IR micro-imaging are shown to be excellent tools for determining such transport resistances. By studying short-chain-length alkane guest molecules in crystals of the metal-organic framework compound Zn(tbip) a data collection of surface permeabilities is established.

The intracrystalline concentration profiles during molecular uptake of methanol by an initially empty, single crystal of microporous manganese(II) formate (Mn(HCO2)2), representing an ionic inorganic-organic hybrid within the MOF family, are monitored by interference microscopy. Within these profiles, a crystal section could be detected where over the total of its extension ( approximately 2 microm x 50 microm x 30 microm) molecular uptake ideally followed the pattern of one-dimensional diffusion. Analysis of the evolution of intracrystalline concentration in this section directly yields the permeability of the crystal surface and the intracrystalline diffusivity as a function of the concentration of the total range of 0