Search

Objective: To explore the value of 18F fluorodeoxy-glucose (FDG) positron emission tomography (PET) in Burkitt's lymphoma. Methods: All Burkitt's lymphoma patients referred for FDG PET or FDG PET/computed tomography (CT) exams at our institution from June 2003 to June 2006 were included. Selected patients were followed and clinical information was reviewed retrospectively. Results from FDG PET-PET/CT, as blindly reviewed by a consensus of two experienced readers, were compared with the status of the disease as determined by other laboratory, clinical and imaging exams and clinical follow-up. FDG PET-PET/CT results were classified as true positive or negative and false positive or negative. The degree of FDG uptake in the positive lesions was semiquantified as maximum standard uptake value (SUVmax). Results: Fifty-seven FDG PET-PET/CT exams were done in 15 patients. Seven exams were done for initial staging, 8 during and 14 after the completion of therapy, and 28 for disease surveillance. For nodal disease FDG PET-PET/CT was true positive in 8, true negative in 47 and false positive in 2 exams (sensitivity 100%, specificity 96%). For extranodal disease FDG PET-PET/CT was true positive in 6, true negative in 48 and false positive in 3 exams (sensitivity 100%, specificity 94%). The mean SUVmax for the positive nodal lesions was 15.7 (range 6.9-21.7, median 18.5) and for extranodal lesions was 14.2 (range 6.2-24.3, median 12.4). Conclusions: FDG PET-PET/CT is sensitive for the detection of viable disease in Burkitt's lymphoma. Affected areas demonstrated high degree of uptake that was reversible upon successful implementation of treatment. © 2009 Elsevier Ireland Ltd.

Purpose: Water equivalent polymer gel dosimeters and magnetic resonance imaging were employed to measure the output factors of the two smallest treatment fields available in a Gamma Knife model C radiosurgery unit, those formed employing the 4 and 8 mm final collimator helmets. Methods: Three samples of the VIP normoxic gel formulation were prepared and irradiated so that a single shot of the field whose output factor is to be measured and a single shot of the reference 18 mm field were delivered in each one. Emphasis is given to the development and benchmarking of a refined data processing methodology of reduced uncertainty that fully exploits the 3D dose distributions registered in the dosimeters. Results: Polymer gel results for the output factor of the 8 mm collimator helmet are found to be in close agreement with the corresponding value recommended by the vendor (0.955±0.007 versus 0.956, respectively). For the 4 mm collimator helmet, however, polymer gel results suggest an output factor 3% lower than the value recommended by the vendor (0.841±0.009 versus 0.870, respectively). Conclusions: A comparison with corresponding measurements published in the literature indicates that output factor results of this work are in agreement with those obtained using dosimetric systems which, besides fine spatial resolution and lack of angular and dose rate dependence of the dosimeter's response, share with polymer gels the favorable characteristic of minimal radiation field perturbation. © 2009 American Association of Physicists in Medicine.

Computed tomography provides high-resolution imaging of the human body. However, it contributes mainly to the doses on the population. Additionally, the fact that children are two to three times more sensitive to the x rays compared to the adults results in the increased need of taking action for the reduction of the dose regarding the computed tomography examinations. The first part of this paper presents the results of an investigation on the variation of doses to children while the second part compares those results with the European standards. This project took place in twelve hospitals distributed throughout the country. The weighted computed dose-index and the dose length product were calculated for four different age-categories (namely 0, 1, 5 and 10-year-old) and for the three most often examinations (brain, thorax and abdomen). Effective dose values were estimated using coefficients and patients data. The measurements showed that only a few hospitals are taking into account the protocols regarding the age of the children. As a result, many patients receive high doses without this being necessary. Thus, reducing dose methods should be adapted in order to improve the optimization of this high dose modality. Copyright © 2009 Health Physics Society.

A methodology for correcting spatial distortions in planar images for small Field Of View (FOV) γ-Camera systems based on Position Sensitive Photomultiplier Tubes (PSPMT) and pixelated scintillation crystals is described. The process utilizes a correction matrix whose elements are derived from a prototyped planar image obtained through irradiation of the scintillation crystal by a 60Co point source and without a collimator. The method was applied to several planar images of a SPECT experiment with a simple phantom construction at different detection angles. The tomographic images are obtained using the Maximum-Likelihood Expectation-Maximization (MLEM) reconstruction technique. Corrected and uncorrected images are compared and the applied correction methodology is discussed. © 2009 IOP Publishing Ltd and SISSA.

The charge limitation for peripheral Field Of View (FONT) events detected by the most commonly used Position Sensitive Photomultiplier Tubes (PSPMTs) results to spatial distortions and non-uniformities of the obtained planar images. These effects can be corrected with newly developed sophisticated techniques operating on the charge signals from the individual wires of the multi-anode systems. However, a similar algorithmic approach for the simple case, where the resistive chain readout technique is used and, consequently, the original charge distribution information is lost, is not applicable. In this work the development of a new method to eliminate these distortion effects in the planar images for gamma-Camera systems based on resistive chain techniques is presented. The proposed model, which incorporates an a priori knowledge of three parameters related to light diffusion inside the scintillation crystal in use, provides an accurate, analytically calculated estimate of the spatial correction as a function of the primary reconstructed planar position from the resistive chain signals. This algorithm can be used online on an event-by-event basis and can be applied to both, homogeneous and pixelated crystals.

Entrance surface radiation doses were measured with thermoluminescent dosimeters for 98 children who were referred to a cardiology department for the diagnosis or the treatment of a congenital heart disease. Additionally, all the radiographic parameters were recorded and Monte Carlo simulations were performed for the estimation of entrance surface dose to effective dose conversion factors, in order to further calculate the effective dose for each child. For diagnostic catheterisations the values ranged from 0.16 to 14.44mSv, with average 3.71mSv, and for therapeutic catheterisations the values ranged from 0.38 to 25.01mSv, with average value 5mSv. Effective doses were estimated for diagnostic procedures and interventional procedures performed for the treatment of five different heart diseases: (a)atrial septal defect (ASD), (b)ventricular septal defect (VSD), (c)patent ductus arteriosus (PDA), (d)aorta coarctation and (e)pulmonary stenosis. The high levels of radiation exposure are, however, balanced with the advantages of cardiac catheterisations such as the avoidance of surgical closure and the necessity of shorter or even nohospitalisation. © 2009 IOP Publishing Ltd.

Dose distributions registered in water equivalent, polymer gel dosimeters were used to measure the output factors and off-axis profiles of the radiosurgical photon beams employed for CyberKnife radiosurgery. Corresponding measurements were also performed using a shielded silicon diode commonly employed for CyberKnife commissioning, the PinPoint ion chamber, and Gafchromic EBT films, for reasons of comparison. Polymer gel results of this work for the output factors of the 5, 7.5, and 10 mm diameter beams are (0.702±0.029), (0.872±0.039), and (0.929±0.041), respectively. Comparison of polymer gel and diode measurements shows that the latter overestimate output factors of the two small beams (5% for the 5 mm beam and 3% for the 7.5 mm beams). This is attributed to the nonwater equivalence of the high atomic number silicon material of the diode detector. On the other hand, the PinPoint chamber is found to underestimate output factors up to 10% for the 5 mm beam due to volume averaging effects. Polymer gel and EBT film output factor results are found in close agreement for all beam sizes, emphasizing the importance of water equivalence and fine detector sensitive volume for small field dosimetry. Relative off-axis profile results are in good agreement for all dosimeters used in this work, with noticeable differences observed only in the PinPoint estimate of the 80%-20% penumbra width, which is relatively overestimated. © 2008 American Association of Physicists in Medicine.

The main purpose of most spam e-mail messages distributed on Internet today is to entice recipients into visiting World Wide Web pages that are advertised through spam. In essence, e-mail spamming is a campaign that advertises URL addresses at a massive scale and at minimum cost for the advertisers and those advertised. Nevertheless, the characteristics of URL addresses and of web sites advertised through spam have not been studied extensively. In this paper, we investigate the properties of URL-dissemination through spam e-mail, and the characteristics of URL addresses disseminated through spam. We conclude that spammers advertise URL addresses non-repetitively and that spam-advertised URLs are short-lived, elusive, and therefore hard to detect and filter. We also observe that reputable URL addresses are sometimes used as decoys against e-mail users and spam filters. These observations can be valuable for the configuration of spam filters and in order to drive the development of new techniques to fight spam. © 2007 Elsevier Ltd. All rights reserved. 31 4 966 985

The prototype of a stereotactic collimator set developed in our department is evaluated for clinical use. This set consists of three cylindrical blocks mounted on a tray which slides in the wedge insert of a Siemens Primus accelerator. Each block has a collimating hole along its long axis to produce radiation fields of circular cross-section at the isocentre plane with diameters of 15 mm, 20 mm and 25 mm. Different geometric and dosimetric quality assurance tests were performed and results are found within the limits set for stereotactic radiotherapy. Dosimetry results measured using Kodak EDR-2 radiographic film and a pinpoint ion chamber also show good agreement with corresponding results calculated by Monte Carlo simulation of the linear accelerator head and the collimators. Measured dosimetry data were used to adapt a conventional PLATO treatment planning system for stereotactic radiotherapy using the prototype collimator set. Treatment planning system calculations and film measurements for treatment of an intracranial lesion in an anthropomorphic head phantom using coplanar 180 degrees arcs are compared and found to agree within 2 mm. This supports the accuracy of dose delivery using the prototype stereotactic collimators. Despite their increased penumbra (2.5-3.5 mm relative to 2-2.5 mm for commercially available collimators) the ease of construction makes the proposed stereotactic collimators an interesting alternative for accomplishing cost effective stereotactic treatments.

Ample literature exists on the dose overestimation by commercially available treatment planning systems in MammoSite® applications using high dose rate 192Ir sources for partial breast brachytherapy as monotherapy, due to their inability to predict the dose reduction caused by the radiographic contrast solution in the balloon catheter. In this work Monte Carlo simulation is used to verify the dose rate reduction in a balloon breast applicator which does not vary significantly with distance and it is 1.2% at the prescription distance for the reference simulated geometry of 10% diluted radiographic contrast media and 2.5 cm balloon radius. Based on these findings and the minimal hardening of the initially emitted photon spectrum for 192Ir, a simple analytical method is proposed and shown capable for correcting dosimetry planning in clinical applications. Simulations are also performed to assess the corresponding dose reduction in applications of balloon breast applicators using high dose rate 169Yb sources that have recently become available. Results yield a far more significant and distance dependent dose reduction for 169Yb (on the order of 20% at the prescription distance for the abovementioned reference simulation geometry). This dose reduction cannot be accounted for using simple analytical methods as for 192Ir due to the significant hardening of the initially emitted Yb169 photons within the diluted radiographic contrast media. Combined with results of previous works regarding the effect of altered scatter conditions (relative to treatment planning system assumptions) on breast treatment planning accuracy, which is more pronounced for 169Yb relative to 192Ir, these findings call for the amendment of dose treatment planning systems before using 169Yb high dose rate sources in balloon breast applicators. © 2007 American Association of Physicists in Medicine.

The aim of this study was to determine the radiation doses to patients during extracorporeal shock wave lithotripsy (ESWL) and compare them with the available bibliographical data. In this method localization of the renal stones is attained by the use of fluoroscopy, and thus ESWL is included among those medical practices associated with patient radiation exposure. The entrance surface dose was measured using 3-4 thermoluminescent dosimeters positioned on the patients' backs at the entrance surfaces of the two x-ray beams for 50 ESWL procedures. Fluoroscopy time and number of spot films were also recorded. The average entrance surface dose at the patient's side with the renal stone was estimated to be 76.5 mGy for the oblique x-ray beam and 44.5 mGy for the PA x-ray beam. The mean fluoroscopy time was 204 s while 4 spot films were acquired on average. The mean effective dose (E) was estimated as 1.63 mSv per patient. The mean entrance surface dose values recorded in this study are comparable to but smaller than the values reported in the literature for ESWL, while the mean fluoroscopy time is within the range of values reported by other authors. On the other hand, the estimated E value is relatively higher compared to the corresponding values given in the literature based on patient measurements. However, it is comparable to recent published data acquired using extended measurements in an anthropomorphic phantom. Copyright © 2006 Health Physics Society.

The dosimetric literature data concerning the medical personnel working in positron emission tomography/computed tomography (PET/CT) departments are limited. Therefore, we measured the radiation dose of the staff working in the first PET/CT department in Greece at the Diagnostic and Therapeutic Center of Athens HYGEIA-Harvard Medical International. As, for the time being, only 2deoxy-2- [F-18]fluoro-d-glucose (FDG) PET studies are performed, radiation dose measurements concern those derived from dispensing of the radiopharmaceutical as well as from the patients undergoing FDG-PET imaging. Our aim is to develop more effective protective measures against radionuclide exposure. To estimate the effective dose from external exposure, all seven members of the staff (two nurses, two medical physicists, two technologists, one secretary) had TLD badges worn at the upper pocket of their overall, TLD rings on the right hand and digital dosimeters at their upper side pocket. In addition, isodose curves were measured with thermoluminescence detectors for distances of 20, 50, 70 and 100 cm away from patients who had been injected with F-18-FDG. Dose values of the PET/CT staff were measured with digital detectors, TLD badges and TLD rings over the first 8 months for a total of 160 working days of the department’s operation, consisting of a workload of about 10-15 patients/week who received 250-420 MBq of F-18-FDG each. Whole body collective doses and hand doses for the staff were the following: Nurse #1 received 1.6 mSv as a whole body dose and 2,1 as a hand dose, Nurse #2 received 1.9 and 2.4 mSv respectively. For medical physicist #1 the dose values were 1.45 mSv whole body and 1.7 mSv hand dose, for medical physicist #2 1.67 mSv wholebody dose and 1.55 mSv hand dose and for technologists #1 & #2 the whole body doses were 0.7 and 0.64 mSv respectively. Lastly, the secretary received 0.1 mSv whole body dose. These preliminary data have shown that the dose levels of our PET/CT staff are within acceptable limits. (c) 2006 Elsevier B.V. All rights reserved.

Monte Carlo simulation dosimetry is used to compare 169Yb to 192Ir for breast high dose rate (HDR) brachytherapy applications using multiple catheter implants. Results for bare point sources show that while 169Yb delivers a greater dose rate per unit air kerma strength at the radial distance range of interest to brachytherapy in homogeneous water phantoms, it suffers a greater dose rate deficit in missing scatter conditions relative to 192Ir. As a result of these two opposing factors, in the scatter conditions defined by the presence of the lung and the finite patient dimensions in breast brachytherapy the dose distributions calculated in a patient equivalent mathematical phantom by Monte Carlo simulations for the same implant of either 169Yb or 192Ir commercially available sources are found comparable. Dose volume histogram results support that 169Yb could be at least as effective as 192Ir delivering the same dose to the lung and slightly reduced dose to the breast skin. The current treatment planning systems' approach of employing dosimetry data precalculated in a homogeneous water phantom of given shape and dimensions, however, is shown to notably overestimate the delivered dose distribution for 169Yb. Especially at the skin and the lung, the treatment planning system dose overestimation is on the order of 15%-30%. These findings do not undermine the potential of 169Yb HDR sources for breast brachytherapy relative to the most commonly used 192Ir HDR sources. They imply, however, that there could be a need for the amendment of dose calculation algorithms employed in clinical treatment planning of particular brachytherapy applications, especially for intermediate photon energy sources such as 169Yb. © 2006 American Association of Physicists in Medicine.

Seeking to assess the radiation risk associated with radiological examinations in neonatal intensive care units, thermo-luminescence dosimetry was used for the measurement of entrance surface dose (ESD) in 44 AP chest and 28 AP combined chest-abdominal exposures of a sample of 60 neonates. The mean values of ESD were found to be equal to 44 ± 16 μGy and 43 ± 19 μGy, respectively. The MCNP-4C2 code with a mathematical phantom simulating a neonate and appropriate x-ray energy spectra were employed for the simulation of the AP chest and AP combined chest-abdominal exposures. Equivalent organ dose per unit ESD and energy imparted per unit ESD calculations are presented in tabular form. Combined with ESD measurements, these calculations yield an effective dose of 10.2 ± 3.7 μSv, regardless of sex, and an imparted energy of 18.5 ± 6.7 μJ for the chest radiograph. The corresponding results for the combined chest-abdominal examination are 14.7 ± 7.6 μSv (males)/17.2 ± 7.6 μSv (females) and 29.7 ± 13.2 μJ. The calculated total risk per radiograph was low, ranging between 1.7 and 2.9 per million neonates, per film, and being slightly higher for females. Results of this study are in good agreement with previous studies, especially in view of the diversity met in the calculation methods. © 2006 IOP Publishing Ltd.

In this work, a polymer gel-magnetic resonance (MR) imaging method is employed for the dosimetric characterization of a new 125I low dose rate seed (IsoSeed® model I25.S17). Two vials filled with PABIG gel were prepared in-house and one new seed as well as one commercially available 125I seed of similar dose rate and well-known dosimetric parameters (IsoSeed® model I25.S06) were positioned in each vial. Both seeds in each vial were MR scanned simultaneously on days 11 and 26 after implantation. The data obtained from the known seed in each vial are used to calibrate the gel dose response which, for the prolonged irradiation duration necessitated by the investigated dose rates, depends on the overall irradiation time. Data for this study are presented according to the AAPM TG-43 dosimetric formalism. Polymer gel results concerning the new seed are compared to corresponding, published dosimetric results obtained, for the purpose of the new seed clinical implementation, by our group using the established methods of Monte Carlo (MC) simulation and thermo-luminescence dosimetry (TLD). Polymer gel dosimetry yields an average dose rate constant value of Λ = (0.921 ± 0.031) cGy h-1 U-1 relative to MCΛ = (0.929 ± 0.014) cGy h-1 U-1, TLDΛ = (0.951 ± 0.044) cGy h-1 U-1 and the average value of Λ = (0.940 ± 0.051) cGy h-1 U-1 proposed for the clinical implementation of the new seed. Results for radial dose function, gL(r), and anisotropy function, F(r, θ), also agree with corresponding MC calculations within experimental uncertainties which are smaller for the polymer gel method compared to TLD. It is concluded that the proposed polymer gel-magnetic resonance imaging methodology could be used at least as a supplement to the established techniques for the dosimetric characterization of new low energy and low dose rate interstitial brachytherapy seeds. © 2006 IOP Publishing Ltd.

169Yb has received a renewed focus lately as an alternative to 192Ir sources for high dose rate (HDR) brachytherapy. Following the results of a recent work by our group which proved 169Yb to be a good candidate for HDR prostate brachytherapy, this work seeks to quantify the radiation shielding requirements for 169Yb HDR brachytherapy applications in comparison to the corresponding requirements for the current 192Ir HDR brachytherapy standard. Monte Carlo simulation (MC) is used to obtain 169Yb and 192Ir broad beam transmission data through lead and concrete. Results are fitted to an analytical equation which can be used to readily calculate the barrier thickness required to achieve a given dose rate reduction. Shielding requirements for a HDR brachytherapy treatment room facility are presented as a function of distance, occupancy, dose limit, and facility workload, using analytical calculations for both 169Yb and 192Ir HDR sources. The barrier thickness required for 169Yb is lower than that for 192Ir by a factor of 4-5 for lead and 1.5-2 for concrete. Regarding 169Yb HDR brachytherapy applications, the lead shielding requirements do not exceed 15 mm, even in highly conservative case scenarios. This allows for the construction of a lead door in most cases, thus avoiding the construction of a space consuming, specially designed maze. The effects of source structure, attenuation by the patient, and scatter conditions within an actual treatment room on the above-noted findings are also discussed using corresponding MC simulation results. © 2006 American Association of Physicists in Medicine.

This investigation determined patient doses during digital subtraction angiography (DSA). Fluoroscopy time, dose-area product (DAP) and entrance surface air kerma (ESAK) were analysed from 263 DSA examinations, classified into seven categories: (1) abdominal aorta, iliac, femoral, popliteal and leg arteries; (2) abdominal aorta and superselective DSA of renal arteries; (3) combination of (1) and (2); (4) superselective DSA of common carotid and vertebral arteries, intracranial branches in face and profile projections; (5) superselective DSA of hepatic, splenic, superior and inferior mesenteric arteries; (6) combination of (1) and (4); and (7) celiac trunk and branches. Median DAP values were 67.7, 92.9, 76.6, 53.6, 105.7, 76.1 and 2.6 Gy cm2, respectively. With the exception of one examination, ESAK values were below 2 Gy: the limit for erythema. Compared with published data, DAP values were within the range reported for (1) and (4), slightly larger for (2) and (5), whereas no references were identified for the remaining three categories. © 2006 Oxford University Press.

The use of magnetic resonance imaging as a readout method for polymer gel dosimetry commonly involves long imaging sessions, particularly when high spatial resolution is required in all three dimensions, for the investigation of dose distributions with steep dose gradients and stringent dose delivery specifications. In this work, a volume selective turbo spin echo (TSE) pulse sequence is compared to the established Carr-Purcell-Meiboom-Gill (CPMG) multiecho acquisition with regard to providing accurate dosimetric results in significantly reduced imaging times. Polyethylene glycol diacrylate based (PABIG) gels were irradiated and subsequently scanned to obtain R2 relaxation rate measurements, using a CPMG multiecho sequence and a dual echo TSE utilizing an acceleration (turbo) factor of 64. R2 values, plotted against corresponding Monte Carlo dose calculations, provided calibration data of PABIG gels dose response over a wide dose range. A linear R2 versus dose relationship was demonstrated for both sequences with TSE results presenting reduced dose sensitivity. Although TSE data were found to deviate from linearity at lower doses compared to CPMG data, a relatively wide dynamic dose range of response extending up to approximately 100 Gy was observed for both sequences. The TSE and CPMG sequences were evaluated with a brachytherapy irradiation using a high dose rate 192Ir source and a gamma knife stereotactic radiosurgery irradiation with a single 4 mm collimator helmet shot. Dosimetric results obtained with the TSE and CPMG are shown to compare equally well with the expected dose distributions for these irradiations. The 60-fold scan time reduction achieved with TSE implies that this sequence could prove to be a useful tool for the introduction of polymer gel dosimetry in clinical radiation therapy applications involving high doses and steep dose gradients. © 2005 American Association of Physicists in Medicine.

Objectives: To evaluate the effect of three distinct hormone replacement therapy regimens on mammography. Methods: 121 postmenopausal women who had never received or were past users of hormone replacement therapy were studied prospectively. Women with an intact uterus were randomly allocated either to conjugated equine estrogens 0.625 mg plus medroxyprogesterone acetate 5 mg (CEE/MPA, n = 34) or to 17beta-estradiol 2 mg plus norethisterone acetate 1 mg (E-2/NETA, n = 35). Hysterectomized women received CEE 0.625 mg (CEE, n = 25). Women who either declined or did not qualify for treatment served as controls (n = 27). Treatment was continuous and the study period lasted 12 months. Main outcome measures were the changes according to Wolfe classification between baseline and 12-month-mammograms. Results: No increase in breast density was identified in any of the women in the control group. Two women (8%) in the CEE group showed an increase in breast density. Four women (11.8%) in the CEE/MPA and 11 women (31.4%) in the Ez/NETA group revealed an increase in breast density. No woman in the therapy groups showed an involution of fibroglandular tissue while seven women (25.9%) in the control group exhibited involution of breast parenchyma. Conclusions: Our study suggests that hormone replacement therapy may suspend breast involution but does not increase breast density in the majority of patients. In the minority of patients who show a density increase, the magnitude of this increase varies according to the regimen employed. (C) 2003 Elsevier Science Ireland Ltd. All rights reserved.

A large scale radon survey using track etch detectors has been carried out from 1995 to 1998 in Greece in order to estimate the radon concentrations in Greek dwellings and the exposure of the Greek population to radon. The total data set consisted of 1277 samples. Residential potential alpha energy concentration values ranged between (0.024+/-0.009) and (8+/-1) WLM per year (P

Background: Thallium-201 ((TI)-T-201) reinjection after conventional redistribution imaging is a standard procedure, resulting in enhanced (TI)-T-201 redistribution which is compatible with viable myocardium. Although this method significantly improves identification of viable myocardium, it increases the investigation time by approximately I h. Thus, this technique is suboptimal from the standpoint of patient convenience, since its routine performance may be impractical in a high-volume nuclear medicine laboratory. Hypothesis: This study was undertaken to evaluate the efficacy of an early (TI)-T-201 reinjection and imaging protocol in combination with sublingual nitroglycerin, to detect myocardial ischemia and/or viability, and to reduce the need for conventional (4 h) redistribution imaging. Materials and Methods: In this study, 62 consecutive coronary patients, referred for the detection of possible myocardial ischemia and/or viability, were involved (mean age 55 years, range 41-70). Of those, 50 had previous angina attacks, with 42 having a history of previous myocardial infarction; 10 patients had coronary artery bypass grafting; and the remaining 2 had atypical chest pain. Immediately after the completion of the initial postexer-cise imaging, 0.3 mg sublingual nitroglycerin followed by the reinjection of Im Ci of (TI)-T-201 were administered, and two further sets of images were acquired 1 h and 4 h later Results: In each set of images, a total of 496 segments were analyzed. On postexercise imaging, 305 (61%) segments demonstrated defects of which 198 (65%) showed enhanced thallium uptake, 97 (32%) did not change, and 10(3%) showed reverse redistribution on 1 h reinjection imaging (IRI). Of the 97 persistent defects, only 17 (6%) showed fill-in of (TI)-T-201 on 4 h redistribution imaging (CRI), while 12 (4%) segments showed reverse redistribution. On the other hand, after analyzing the 62 patients of the 1 h IRI, 17 (27%) remained unchanged while in only 1 patient (6%) of 17 the diagnosis changed from myocardial necrosis to ischemia after analysis of the 4 h CRT. Conclusion: These results indicate that early postexercise reinjection of (TI)-T-201 in combination with sublingual nitroglycerin followed by 1 h image acquisition may prove useful for a comprehensive and convenient assessment of myocardial ischemia and/or viability.

The aim of the study was to assess whether changes in the interposition of body compartments affect the results of body composition measurements by dual-energy x-ray absorptiometry (DEXA) in the fan-beam mode. Thirty healthy subjects underwent two sequential measurements: the first was performed in the supine position as described by the manufacturer, and the second in the prone position, Estimates of body composition were compared between the two measurements. Mean body weight did not differ between measurements ([mean +/- SD] supine v prone, 68.561 +/- 12.461 v 68.589 +/- 12.469 kg). Mean bone mineral content (BMC) was lower in the prone position versus the supine position. When the head was excluded, this difference reached statistical significance (supine v prone, 1,738 +/- 361 v 1,688 +/- 360 g, P = .0001). The mean fat tissue mass (FTM) was lower and lean tissue mass (LTM) higher in the prone measurements. When the head was excluded, the mean FTM difference between the two measurements became greater (FTM supine v prone, 25.129 +/- 10.445 v 24.030 +/- 10.388 kg, P = .0001; LTM supine v prone, 37.309 +/- 9.357 v 38.246 +/- 9.150 kg, P = .0001). It is concluded that the positioning of the patient on the examination tal,le affects DEXA body composition measurements by the fan-beam mode. This could imply a lack of accuracy of the method, which may be due to subtle changes in regional tissue depth and fat distribution caused by patient repositioning. Copyright (C) 1998 by W.B. Saunders Company.

To evaluate the efficacy of an early Tl-201 reinjection and imaging protocol for reducing the need for conventional 4-hour or optimal 24-hour redistribution imaging (RI) and detecting of myocardial viability, we compared the results of early postexercise Tl reinjection and imaging with those of 4- and 24-hour RI in 74 consecutive patients aged 55 +/- 9 years (mean +/- SD) who were assessed for myocardial ischemia. One millicurie of T1 was injected promptly after completion of the initial postexercise imaging (PEX) and three additional sets of images were acquired 1, 4 and 18-24 h later. A total of 2,368 segments were evaluated. On PEX, 390 (17%) segments showed defects, of which 287 (74%) showed enhanced T1 uptake at I-hour RI; 89 (23%) did not change and 14 (4%) showed reverse redistribution. Of the 103 persistent defects, only 27 (7%) showed further fill-in of T1; 62 (16%) segments showed reverse redistribution at 4-hour RI while at 18- to 24-hour RI 17 (4%) and 47 (12%) segments showed further fill-in of T1 and reverse redistribution, respectively. Finally, after analysis of 4- and 18- to 24-hour RI, the diagnosis changed from myocardial necrosis to ischemia in only 2 (3%) patients. In conclusion, these results suggest that by eliminating the need for an additional delayed set of images for detection of myocardial viability, this protocol reduces the total investigation procedure, is more convenient for the patient, increases patient turnover and expedites the decision-making process.

Background. Several variables have been established as risk factors for osteoporosis: it is more common among women and the gender difference increases with age and with years since menopause. Estrogens, androgens, physical activity, and body mass index have been previously shown to be positively associated with bone mineral density and inversely with risk for fractures. Methods. To assess the effect on bone mineral content of energy-generating nutrients, healthy men (n = 36) and women (n = 118) ages 25-69 years were interviewed among visitors and staff of the University of Athens Department of Medical Physics. Bone mineral density (BMD) was measured by single photon absorptiometry. Results. Demographic and lifestyle variables were not significantly related to BMD in this study, although the patterns were consistent with those previously reported by other investigators. Total energy intake, which also reflects energy expenditure through physical activity, was positively associated with BMD among both men (P = 0.003) and women (P = 0.04). After adjustment for nonnutritional variables and energy intake, monounsaturated fat, which in the Greek population is mostly derived from olive oil, was associated with BMD. The association was positive among both men (P = 0.01) and women (P = 0.03). There was evidence for an inverse association between carbohydrate intake and BMD, but the association was significant only with respect to mono- and disaccharides. Conclusions. In this population, consumption of monounsaturated fat and physical activity were predictive of bone mineral density, but larger studies are needed. (C) 1997 Academic Press.