Search

The article describes the process of developing an automated intelligent search system based on physical effects. The developed system performs descriptor, full-text search, logging of search queries, displaying physical effects and other functions.

As an addition to previously obtained data, it has been shown that the adsorption isotherms calculated by the molecular dynamics method for components of light hydrocarbon mixtures in micropores of active carbons and on graphene surfaces are quantitatively described by equations of lattice models with well-coordinated equation parameters.

Bridged 1,2,4,5-tetraoxanes were prepared using available acidic ion exchange resin with high yields despite the possibility of peroxide decomposition under heterogeneous conditions. The bridged tetraoxanes demonstrated high cytotoxicity against HeLa cancer cells in vitro, which in some cases was higher than that of cisplatin, artesunate, and dihydroartemisinin.

The catalyst H3+x PMo12-x +6 Mox +5 O40 supported on SiO2 was developed for peroxidation of 1,3- and 1,5-diketones with hydrogen peroxide with the formation of bridged 1,2,4,5-tetraoxanes and bridged 1,2,4-trioxolanes (ozonides) with high yield based on isolated products (up to 86 and 90 %, respectively) under heterogeneous conditions. Synthesis of peroxides under heterogeneous conditions is a rare process and represents a challenge for this field of chemistry, because peroxides tend to decompose on the surface of a catalyst . A new class of antifungal agents for crop protection, that is, cyclic peroxides: bridged 1,2,4,5-tetraoxanes and bridged ozonides, was discovered. Some ozonides and tetraoxanes exhibit a very high antifungal activity and are superior to commercial fungicides, such as Triadimefon and Kresoxim-methyl. It is important to note that none of the fungicides used in agricultural chemistry contains a peroxide fragment.

Invasive meningococcal disease (IMD) due to serogroup Y Neisseria meningitidis emerged in Europe during the 2000s. Draft genomes of serogroup Y isolates in Sweden revealed that although the population structure of these isolates was similar to other serogroup Y isolates internationally, a distinct strain (YI) and more specifically a sublineage (1) of this strain was responsible for the increase of serogroup Y IMD in Sweden. We performed single molecule real-time (SMRT) sequencing on eight serogroup Y isolates from different sublineages to unravel the genetic and epigenetic factors delineating them, in order to understand the serogroup Y emergence. Extensive comparisons between the serogroup Y sublineages of all coding sequences, complex genomic regions, intergenic regions, and methylation motifs revealed small point mutations in genes mainly encoding hypothetical and metabolic proteins, and non-synonymous variants in genes involved in adhesion, iron acquisition, and endotoxin production. The methylation motif CACNNNNNTAC was only found in isolates of sublineage 2. Only seven genes were putatively differentially expressed, and another two genes encoding hypothetical proteins were only present in sublineage 2. These data suggest that the serogroup Y IMD increase in Sweden was most probably due to small changes in genes important for colonization and transmission.

The article is devoted to the activities of corresponding member of the USSR Academy of Sciences V. S. Troitskiy stayed against the launch of the Gorky nuclear power plant for heat supply. V. S. Troitskiy’s arguments against starting this object are indicated. The reasons for the significance of his actions against GAST for the development of informal politicized organizations in Gorky are revealed. The influence of V. S. Troitskiy on the position of the scientific community on significant socio-political issues is indicated

It has been demonstrated that adsorption isotherms on microporous activated carbons calculated by the method of molecular dynamics at temperatures higher than critical for adsorbents quantitatively coincide with experimental isotherms at calculations in micropores of finite sizes, with the micropore width being chosen in accordance with the theory of micropore volume filling and properly selected force field.

The authors examine the main problems regarding the development of international legal framework in the area of fighting terrorism, including the elaboration of the universal definition of the phenomenon of “terrorism” and “international terrorism”. The analysis of legal systems of the leading countries indicates the differences in national legislations in the sphere of fighting terrorism, which creates difficulties on the global scale, since each state has the own representation on this phenomenon, and thus, the means of counteraction. Such gaps in the international law is beneficial for the United State to ensure national interests. The main conclusions lie in the thesis that the global community is currently incapable of developing the unified normative-legal base in the area of fighting terrorism, namely in pertains to consolidation of the universal definition of this phenomenon within the framework of the United Nations. Among the main reasons, the authors highlight the problem of cooperation of the national legal systems on the global scale in this sphere, as well as unwillingness of some countries to fulfill prior commitments.

Background: Human resources for health (HRH) include a range of occupations that aim to promote or improve human health. The UN Sustainable Development Goals (SDGs) and the WHO Health Workforce 2030 strategy have drawn attention to the importance of HRH for achieving policy priorities such as universal health coverage (UHC). Although previous research has found substantial global disparities in HRH, the absence of comparable cross-national estimates of existing workforces has hindered efforts to quantify workforce requirements to meet health system goals. We aimed to use comparable and standardised data sources to estimate HRH densities globally, and to examine the relationship between a subset of HRH cadres and UHC effective coverage performance. Methods: Through the International Labour Organization and Global Health Data Exchange databases, we identified 1404 country-years of data from labour force surveys and 69 country-years of census data, with detailed microdata on health-related employment. From the WHO National Health Workforce Accounts, we identified 2950 country-years of data. We mapped data from all occupational coding systems to the International Standard Classification of Occupations 1988 (ISCO-88), allowing for standardised estimation of densities for 16 categories of health workers across the full time series. Using data from 1990 to 2019 for 196 of 204 countries and territories, covering seven Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) super-regions and 21 regions, we applied spatiotemporal Gaussian process regression (ST-GPR) to model HRH densities from 1990 to 2019 for all countries and territories. We used stochastic frontier meta-regression to model the relationship between the UHC effective coverage index and densities for the four categories of health workers enumerated in SDG indicator 3.c.1 pertaining to HRH: physicians, nurses and midwives, dentistry personnel, and pharmaceutical personnel. We identified minimum workforce density thresholds required to meet a specified target of 80 out of 100 on the UHC effective coverage index, and quantified national shortages with respect to those minimum thresholds. Findings: We estimated that, in 2019, the world had 104·0 million (95% uncertainty interval 83·5-128·0) health workers, including 12·8 million (9·7-16·6) physicians, 29·8 million (23·3-37·7) nurses and midwives, 4·6 million (3·6-6·0) dentistry personnel, and 5·2 million (4·0-6·7) pharmaceutical personnel. We calculated a global physician density of 16·7 (12·6-21·6) per 10 000 population, and a nurse and midwife density of 38·6 (30·1-48·8) per 10 000 population. We found the GBD super-regions of sub-Saharan Africa, south Asia, and north Africa and the Middle East had the lowest HRH densities. To reach 80 out of 100 on the UHC effective coverage index, we estimated that, per 10 000 population, at least 20·7 physicians, 70·6 nurses and midwives, 8·2 dentistry personnel, and 9·4 pharmaceutical personnel would be needed. In total, the 2019 national health workforces fell short of these minimum thresholds by 6·4 million physicians, 30·6 million nurses and midwives, 3·3 million dentistry personnel, and 2·9 million pharmaceutical personnel. Interpretation: Considerable expansion of the world's health workforce is needed to achieve high levels of UHC effective coverage. The largest shortages are in low-income settings, highlighting the need for increased financing and coordination to train, employ, and retain human resources in the health sector. Actual HRH shortages might be larger than estimated because minimum thresholds for each cadre of health workers are benchmarked on health systems that most efficiently translate human resources into UHC attainment. Anders O. Larsson ingår i gruppen GBD 2019 Human Resources for Health Collaborators

Recent evidence shows that small open reading frame (smORF

Understanding mechanisms that shape horizontal exchange in prokaryotes is a key problem in biology. A major limit on DNA entry is imposed by restriction-modification (RM) processes that depend on the pattern of DNA modification at host-specified sites. In classical RM, endonucleolytic DNA cleavage follows detection of unprotected sites on entering DNA. Recent investigation has uncovered BREX systems, RM-like activities that employ host protection by DNA modification but replication arrest without evident nuclease action on unmodified phage DNA. We show that the historical stySA RM locus of Salmonella enterica sv Typhimurium is a BREX homolog. The stySA29 allele of the hybrid strain LB5000 carries a mutated version of the ancestral LT2 BREX system. Surprisingly, both a restriction and a methylation defect are observed for this lineage despite lack of mutations in brxX, the modification gene homolog. Instead, flanking genes pglZ and brxC each carry multiple mutations (μ) in C-terminal domains. To avoid plasmid artifacts and potential stoichiometric interference, we chose to investigate this system in situ, replacing the mutated pglZμ and brxCμ genes with wild type (WT). PglZ-WT supports methylation in the presence of either BrxCμ or BrxC-WT but not in the presence of a deletion/insertion allele, ΔbrxC::cat. Restriction of phage L requires both BrxC-WT and PglZ-WT, implicating the BrxC C-terminus specifically in restriction activity. Disruption of four other CDS with cat cassettes still permitted modification, suggesting that BrxC, PglZ and BrxX are principal components of the modification activity. BrxL is required for restriction only. A partial disruption of brxL disrupts transcription globally.

IntroductionThe current study determined the level and trends associated with the incidence, death and disability rates for bladder cancer and its attributable risk factors in 204 countries and territories, from 1990 to 2019, by age, sex and sociodemographic index (SDI; a composite measure of sociodemographic factors).MethodsVarious data sources from different countries, including vital registration and cancer registries were used to generate estimates. Mortality data and incidence data transformed to mortality estimates using the mortality to incidence ratio (MIR) were used in a cause of death ensemble model to estimate mortality. Mortality estimates were divided by the MIR to produce incidence estimates. Prevalence was calculated using incidence and MIR-based survival estimates. Age-specific mortality and standardised life expectancy were used to estimate years of life lost (YLLs). Prevalence was multiplied by disability weights to estimate years lived with disability (YLDs), while disability-adjusted life years (DALYs) are the sum of the YLLs and YLDs. All estimates were presented as counts and age-standardised rates per 100 000 population.ResultsGlobally, there were 524 000 bladder cancer incident cases (95% uncertainty interval 476 000 to 569 000) and 229 000 bladder cancer deaths (211 000 to 243 000) in 2019. Age-standardised death rate decreased by 15.7% (8.6 to 21.0), during the period 1990–2019. Bladder cancer accounted for 4.39 million (4.09 to 4.70) DALYs in 2019, and the age-standardised DALY rate decreased significantly by 18.6% (11.2 to 24.3) during the period 1990–2019. In 2019, Monaco had the highest age-standardised incidence rate (31.9 cases (23.3 to 56.9) per 100 000), while Lebanon had the highest age-standardised death rate (10.4 (8.1 to 13.7)). Cabo Verde had the highest increase in age-standardised incidence (284.2% (214.1 to 362.8)) and death rates (190.3% (139.3 to 251.1)) between 1990 and 2019. In 2019, the global age-standardised incidence and death rates were higher among males than females, across all age groups and peaked in the 95+ age group. Globally, 36.8% (28.5 to 44.0) of bladder cancer DALYs were attributable to smoking, more so in males than females (43.7% (34.0 to 51.8) vs 15.2% (10.9 to 19.4)). In addition, 9.1% (1.9 to 19.6) of the DALYs were attributable to elevated fasting plasma glucose (FPG) (males 9.3% (1.6 to 20.9); females 8.4% (1.6 to 19.1)).ConclusionsThere was considerable variation in the burden of bladder cancer between countries during the period 1990–2019. Although there was a clear global decrease in the age-standardised death, and DALY rates, some countries experienced an increase in these rates. National policy makers should learn from these differences, and allocate resources for preventative measures, based on their country-specific estimates. In addition, smoking and elevated FPG play an important role in the burden of bladder cancer and need to be addressed with prevention programmes.

Two strains of filamentous, colorless sulfur bacteria were isolated from bacterial fouling in the outflow of hydrogen sulfide-containing waters from a coal mine (Thiothrix sp. Ku-5) and on the seashore of the White Sea (Thiothrix sp. AS). Metagenome-assembled genome (MAG) A52 was obtained from a sulfidic spring in the Volgograd region, Russia. Phylogenetic analysis based on the 16S rRNA gene sequences showed that all genomes represented the genus Thiothrix. Based on their average nucleotide identity and digital DNA-DNA hybridization data these new isolates and the MAG represent three species within the genus Thiothrix with the proposed names Thiothrix subterranea sp. nov. Ku-5T, Thiothrix litoralis sp. nov. AST, and “Candidatus Thiothrix anitrata” sp. nov. A52. The complete genome sequences of Thiothrix fructosivorans QT and Thiothrix unzii A1T were determined. Complete genomes of seven Thiothrix isolates, as well as two MAGs, were used for pangenome analysis. The Thiothrix core genome consisted of 1,355 genes, including ones for the glycolysis, the tricarboxylic acid cycle, the aerobic respiratory chain, and the Calvin cycle of carbon fixation. Genes for dissimilatory oxidation of reduced sulfur compounds, namely the branched SOX system (SoxAXBYZ), direct (soeABC) and indirect (aprAB, sat) pathways of sulfite oxidation, sulfur oxidation complex Dsr (dsrABEFHCEMKLJONR), sulfide oxidation systems SQR (sqrA, sqrF), and FCSD (fccAB) were found in the core genome. Genomes differ in the set of genes for dissimilatory reduction of nitrogen compounds, nitrogen fixation, and the presence of various types of RuBisCO.

This article describes the application of relatively high-density foamed cement for cementing wells in the Volga and Urals region. Good cementing practices with high density or conventional density cement slurry is required to ensure mud displacement in fluid saturated intervals of reservoir formations (Benge et al; 1982). With this requirement met, the cement column should circumferentially cover the annulus at this very interval which is exposed to the highest loads. However, due to limited physical and mechanical properties of conventional cement slurries in both liquid and solid state, in certain cases conventional slurries do not solve the problems encountered by the Customer, namely elimination of annular flow between the casing and cement sheath. High-density foamed cement is considered as an improved alternative to conventional cement slurries, and results in a high quality and durable sealing of gas and oil saturated production zones for the life of the well. Proprietary software and process equipment are used for the mixing of the foamed cement slurry with a variety of foaming properties. This process enables the use of a base cement slurry with higher density (up to 2.1 g/cm3) for delivering foamed cement slurries in a wide range of densities. To avoid possible cross flows behind the casing, pilot tests were conducted, where a conventional cement slurry (1.80–1.90 g/cm3) was replaced with a high-density foamed cement slurry with equivalent density with a foam quality of approx. 10% making the cement sheath elastic with improved adhesion to both the casing string and the formation (Spaulding et al; 2018). Pilot tests, incorporating the cementing of several production casings, were conducted where only foamed cement slurries with various foam quality were used in the entire cementing interval. No conventional (non-foamed) cement systems were used in these cases.