Search

After a tooth extraction, a dry socket is a common problem that can cause excruciating pain and prevent healing. Antiseptic dressings have historically been the mainstay of treatments for this illness in order to lower bacteria and accelerate healing. Alveogyl is a medicated dressing composed of butamben, iodoform, and eugenol is conventionally used to manage the pain associated with dry socket. The purpose of this study is to assess how well laser therapy treats alveolitis symptoms. The idea that laser therapy is an excellent tool for treating alveolitis is what motivated this meta-analysis. This systematic review aims to evaluate the effects of Level Laser Therapy (LLT) in the treatment of dry socket.  Methods: A literature search was done on PubMed, Lilacs, Web of Science, Scopus, and Cochrane using the keywords entered, and papers published between January 2000 and September 2023 were taken into consideration. The terms "laser" and "dry socket" have been merged using the Boolean conjunction AND; the results show that 65 studies could be identified using the three search engines. Only five were selected to create the current systematic study and metanalysis. The meta-analysis demonstrated that laser therapy is superior to the traditional Alvogyl treatment in managing alveolitis symptoms, especially in pain reduction. The overall effect demonstrated a mean difference of -2.01 (95% CI: -2.43 to -1.59) on the third day of treatment, with a p < 0.05, indicating statistical significance.  Conclusion: The quantitative analysis showed that Low-Level Laser Therapy demonstrated promising potential in managing alveolitis symptoms, particularly in terms of pain reduction, when compared to traditional treatments like Alvogyl. Despite the results indicating a statistically significant reduction in pain, the evidence does not conclusively establish laser therapy as a complete substitute for conventional therapies. Further high-quality studies with larger sample sizes and standardized protocols are required to confirm its long-term efficacy and to assess its broader applicability in clinical settings.

Background: The aim of the present study was to compare the vertical dimension changes, before and after treatment, in two groups of growing patients, one group treated with clear aligner therapy versus a group treated with Quad-helix and bite-block therapy., Methods: The studied sample was composed of n. 40 patients (20 females and 20 males with a mean age of 8.6 ± 1.8 years), enrolled from the Department of Orthodontics at Policlinico of Rome Tor Vergata. The original sample was randomly divided into two groups: Group IF (Invisalign First) and Group BB (Quad-helix and bite block). Pre- (T0) and post-treatment (T1 after 12 months) lateral cephalograms were collected from all the selected patients. Nine cephalometric parameters, both angular and linear, were measured and recorded for each cephalogram., Results: No statistically significant changes were found between both the IF and BB groups at T0, while statistically significant changes were observed in both groups (BB and IF) between T0 and T1 (after 12 months of active therapy), p < 0.005., Conclusions: Both therapies were able to control the patient's vertical condition. To date, the use of conventional appliances seems to have slightly better efficacy in controlling the vertical dimension than aligner therapy.

(1) Background: In recent years, there has been a growing interest in tooth-derived materials as valuable alternatives to synthetic biomaterials for preventing alveolar ridge dimensional changes. This study aimed to evaluate the histological and clinical differences between alveolar ridge preservation procedures in the maxilla and mandible using demineralized dentin treated with Tooth Transformer ® . (2) Methods: A total of 178 patients in good general health were enrolled, with 187 post-extractive sockets lacking buccal and/or palatal bone walls. Alveolar socket preservation procedures and histological evaluations were performed. The sites were divided into two groups: Group A (99 mandibular samples) and Group B (108 maxillary samples). After 5 months (±1 month), single bone biopsies were performed for histologic and histomorphometric analysis. (3) Results: Clinical outcomes demonstrated a good healing of hard and soft tissues with an effective maintenance of bone architecture in both groups. Histomorphometric analysis revealed a total bone volume of 50.33% (±14.86) in Group A compared to 43.53% (±12.73) in Group B. The vital new bone volume was 40.59% (±19.90) in Group A versus 29.70% (±17.68) in Group B, with residual graft dentin material volume at 7.95% (±9.85) in Group A compared to 6.75% (±9.62) in Group B. (4) Conclusions: These results indicate that tooth-derived material supports hard tissue reconstruction by following the structure of the surrounding bone tissue. A 6.8% difference observed between the maxilla and mandible reflects the inherent disparities in natural bone structures in these regions. This suggests that the bone regeneration process after tooth extraction adheres to an anatomical functional pattern that reflects the specific bone characteristics of each area, thus contributing to the preservation of the morphology and functionality of the surrounding bone tissue.

Background: Melanoma cancer represents the most lethal type of skin cancer originating from the malignant transformation of melanocyte cells. Almost 50% of melanomas show the activation of BRAF mutations. The identification and characterization of BRAF mutations led to the development of specific drugs that radically changed the therapeutic approach to melanoma., Methods: We conducted a narrative review of the literature according to a written protocol before conducting the study. This article is based on previously conducted studies. We identified articles by searching electronic databases (Medline, Google Scholar and PubMed). We used a combination of "melanoma", "Braf-Mek inhibitors", " targeted therapy" and "oral side effects"., Results: Eighteen studies were reported in this article showing the relationship between the use of targeted therapy in melanoma cancer and the development of oral side effects, such as mucositis, hyperkeratosis and cellular proliferation., Conclusion: Targeted therapy plays an important role in the treatment of melanoma cancer, showing a notable increase in response rate, prolonged progression-free survival and overall survival in BRAF-mutated melanoma patients. Oral side effects represent a common finding over the course of treatment. However, these adverse effects can be easily managed in a multidisciplinary approach involving collaboration between medical oncologists and dental doctors.

Graft-versus-host disease (GVHD) is a complication of hematopoietic stem cell transplantation (HSCT). GVHD may also develop following solid transplants or blood transfusions if white blood cells are transferred. GVHD affects multiple organs, including the oral tissues. This pictorial review provides a background of GVHD to dental practitioners, describes the most common oral manifestations of GVHD, and highlights the main treatment modifications needed to deliver dental care to patients with GVHD. A narrative review enriched with clinical data was performed by searching the scientific literature for all articles regarding GVHD and oral manifestations/therapies. All articles without exclusion criteria, except animal tests, were included in the above review. Acute GVHD may manifest in the oral mucosa; however, it often develops immediately following HSCT when routine dental treatment is postponed. Chronic GVHD may manifest in the oral mucosa, the salivary glands, and the musculoskeletal compartment. It may indirectly affect the teeth and the oral flora, putting the patient at risk for infections. Importantly, GVHD poses an increased risk for oral cancer. GVHD has a wide range of oral manifestations, some of which may affect dental treatment.

Objectives: The present study aimed to investigate the trueness and precision of an intraoral transfer element (IOTE) designed for matching intraoral and facial scans., Methods: A mannequin head with a maxillary model in position was used. Cone beam computed tomography (CBCT) was used to construct the master model (MM). A digital impression of the maxillary arch was taken using an intraoral scanner, and the IOTE was used to record the maxillary arch position. Twenty facial scans with and twenty without the IOTE in place were performed with a handheld device (Ipad Pro, Apple) using a dedicated software. Digital mounting was performed to build a scan model (SM). Using software for data processing, the three-dimensional deviation between the MM and SM at the central left incisor (#9#), and the left and right first molars (#3#, #14#) was calculated as trueness and linear deviation precision. . Angular deviation was also calculated at the occlusal plane., Results: The linear deviation trueness at #9#, #3# and #14# was 0.3 ± 0.12 mm, 1.07 ± 0.28 mm, and 0.18 ± 0.34 mm, respectively, whereas the precision was 1.17 ± 0.4 mm, 0.43 ± 0.12 mm, and 0.64 ± 0.28 mm, respectively. Trueness of the angular deviation at the occlusal plane was 2.17 ± 0.46°, whereas the angular deviation precision was 0.64 ± 0.28°., Conclusions: Based on in vitro findings the proposed IOTE design is accurate and suitable for clinical use., Clinical Significance: Direct virtual mounting is a reliable technique in vitro; however, in vivo tests are required., Competing Interests: Declaration of Competing Interest Rome, 21st January 2022. All the authors declare no conflict of interest. Luigi Canullo on behalf of others., (Copyright © 2023. Published by Elsevier Ltd.)

Background: Different methods are used for the analysis of marginal and internal fit of partial crowns, but not all of them are applicable for in vivo studies. The aim of this review is to search the available methods, described in the current literature, to assess marginal and internal fit in partial crowns., Methods: an electronic search was performed on Pubmed and Web of Science databases to find studies published from 1 January 2017 up to 2 March 2023, following PRISMA guidelines and Cochrane handbook for systematic reviews. The search strategy applied was: "(marginal) AND (fit OR gap OR adaptation OR discrepancy) AND (inlay OR onlay OR partial crown)". In vitro studies which evaluated marginal and internal fit on CAD CAM or 3D printed partial crowns were included in this review. Quality of the studies was assessed by using Quality Assessment Tool For In Vitro Studies (QUIN tool)., Results: 22 studies were included. Among conventional methods, direct view with microscope, indirect view on resin replicas, and silicone replica technique (SRT) were used. Considering new digital methods, micro-CT, SRT 3D and triple scan technique (TST) were applied., Conclusions: Among 2D methods, direct view technique is the most used marginal fit analysis. For a more comprehensive evaluation, a 3D digital analysis is suggested. SRT and indirect view are the only 2D methods available for in vivo analysis. A protocol for the application of TST for assessment in vivo is now available, but no studies are reported in literature yet.

Saliva is a very complex fluid and it is essential to maintain several physiological processes and functions, including oral health, taste, digestion and immunological defenses. Saliva composition and the oral microbiome can be influenced by several factors, like diet and smoking habits, and their alteration can represent an important access point for pathogens and, thus, for systemic illness onset. In this review, we explore the potentiality of saliva as a new tool for the early detection of some pathological conditions, such as oral diseases, chronic degenerative non-communicable diseases, among these chronic kidney disease (CKD). We also examined the possible correlation between oral and systemic diseases and oral and gut microbiota dysbiosis. In particular, we deeply analyzed the relationship between oral diseases and CKD. In this context, some salivary parameters can represent a new device to detect either oral or systemic pathologies. Moreover, the positive modulation of oral and gut microbiota induced by prebiotics, postbiotics, or symbiotics could represent a new possible adjuvant therapy in the clinical management of oral diseases and CKD.

Capsaicin is a chili peppers extract, genus Capsicum, commonly used as a food spice. Since ancient times, Capsaicin has been used as a "homeopathic remedy" for treating a wild range of pathological conditions but without any scientific knowledge about its action. Several studies have demonstrated its potentiality in cardiovascular, nephrological, nutritional, and other medical fields. Capsaicin exerts its actions thanks to the bond with transient receptor potential vanilloid subtype 1 (TRPV1). TRPV1 is a nociceptive receptor, and its activation starts with a neurosensitive impulse, responsible for a burning pain sensation. However, constant local application of Capsaicin desensitized neuronal cells and leads to relief from neuropathic pain. In this review, we analyze the potential adjuvant role of Capsaicin in the treatment of different pathological conditions either in internal medicine or dentistry. Moreover, we present our experience in five patients affected by oro-facial pain consequent to post-traumatic trigeminal neuropathy, not responsive to any remedy, and successfully treated with topical application of Capsaicin. The topical application of Capsaicin is safe, effective, and quite tolerated by patients. For these reasons, in addition to the already-proven beneficial actions in the internal field, it represents a promising method for the treatment of neuropathic oral diseases.

(1) Background: Different techniques and tools have been developed for implant site preparation. In this clinical scenario, Hybrid Funnel Technique (HFT), a novel osteotomy procedure, has been proposed. (2) Aim: The aim of this retrospective observational study was to consider the different responses to compression of the histological bony compartments (cancellus and cortical). HFT involves the use of multiple drills for the cortical layer preparation and of an osteotome for the osteocompaction of the cancellous bone. (3) Materials and Methods: Following computer-supported implant planning and guided surgery, 10 osteotomies with HFT were performed and 10 implants with the same length and diameter were placed in seven healthy and no daily smoking patients. Periapical X-ray and intraoral photographs were performed at baseline and after 12 months of follow-up to evaluate marginal bone level (MBL) changes and aesthetic results obtained from implant prosthetic rehabilitation. (4) Results: At 1 year of follow-up, 100% of the implants were successfully integrated, MBL change mean value was 0.17 mm ± 0.21. No differences in terms of MBL were noted between thin and thick biotypes. Pink esthetic score (PES) and white esthetic score (WES), assessed one year after definitive restoration placement, were 7.5 ± 2.3 and 8.5 ± 1.1, respectively. (5) Conclusions: Based on the findings of this preliminary clinical study, HFT has led to stability of peri-implant tissues and could represent a reliable technique for surgical preparation of the implant site.

A digital workflow by means of intraoral scanners and computer tomography has been used in dental implantology, allowing clinicians to be potentially more accurate and precise. Computer-Aided Design and Computer-Aided Manufacturing (CAD-CAM) and 3D models facilitate the process from treatment planning to the surgical procedure, up to the implant placement and final prosthesis. The aim of the present retrospective study was to evaluate a fully digital workflow for single-tooth implant rehabilitation. A total of 19 patients (22 implants) were included in the present study, with a mean follow-up time of 2 years. A fully digital workflow was performed on each patient through the planning, design and printing of a surgical guide, following a digital impression made with an intraoral scanner, computer-tomography-guided implant placement and, finally, with the delivery of a CAD-CAM crown. The two-year follow-up results were satisfactory in terms of the aesthetic yield and precision of the prosthesis. In single-implant-supported restorations, due to digital protocols and digital planning, a reduced number of clinical sessions was registered and the treatment plan results were more predictable. Future studies are needed to understand the application of fully digital protocols in cases of partially or totally edentulous patients.

Objectives: Face scans are currently used in dentistry to obtain a virtual patient. Find stable and repeatable references for their matching is a fundamental step. Aim of this study is to evaluate matching reliability of multiple face scans using frontal adhesives references. Null hypothesis was that no significant discrepancy could be detected between the references position analyzed both with surface analysis and linear analysis., Materials and Methods: Nine patients were enrolled for this study and nine soft tissue adhesives landmarks (APLI Paper S.A.U, 4 mm Ø) placed, equally distributed, on the forehead and glabella. Patients were digitally scanned with a portable scanner (iPad Pro 3rd Gen. Apple Store, Cupertino, CA, USA) using the software Bellus3D (Inc. Campbell, CA, USA) in maximum intercuspation, with a full smile and with a scan reference device. After the scan procedure, a high-definition polygon file format (.ply) was exported, and linear measurements were collected with MeshLab (MeshLab; MeshLab). In order to further evaluate reference accuracy, a surface analysis was performed using a CAD software (GOM inspect, GOM). 3D deviations were calculated as root mean square. Statistical analysis was performed used two repeated-measures ANOVAs., Results: Results showed non-significant differences both for linear measurements (p=.22) and surface analysis (p=.58). Frontal references showed to be clinical reliable landmarks for use during face scans alignment, even with different facial expressions., Conclusion: The proposed technique seems to be suitable for the clinical use when superimposition of several face scans is required., Clinical Significance: This study showed the clinical reliability of face scans matching method using adhesives references. These references are cheap and easy to use, allowing for a rapid registration of the patient anatomy., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

(1) Background: The phenomenon of ankylosis of the dental elements has led clinicians to think that properly treated dentin and cement may be a potential graft for alveolar ridge augmentation. Currently, there are no studies in the literature able to histomorphometrically compare the healing patterns of an autogenous dentin particulate graft with the association, or not, of resorbable membranes. The aim of this pilot study is to histologically compare bone after an alveolar ridge augmentation using an autogenous dentin particulate graft with and without a resorbable collagen membrane. (2) Methods: this clinical trial enrolled six patients with defects requiring bone augmentation. Two procedures were performed in all six adult human patients in order to perform a study-control study: in Group 1, a ridge augmentation procedure with an autogenous dentin particulate graft and a resorbable collagen membrane was performed, and, in Group 2, an alveolar ridge preservation without a membrane was performed at the same time (T0). At 4 months, a biopsy of the bone tissues was performed using a 4 mm trephine bur in order to perform a histomorphometric analysis. (3) Results: The histomorphometric analysis demonstrated that Group 1 presented 45% of bone volume, 38% of vital bone, and 7% of residual graft. On the contrary, membrane-free regenerative procedures demonstrated 37% of bone volume, 9% of vital bone, and 27% of non-resorbed graft. In all cases, the regenerated bone allowed the insertion of implants with a standard platform, and no early failures were recorded. (4) Conclusions: Autogenous dentin particulate grafts seem to work best when paired with a membrane.

Several studies have demonstrated a strong relation between periodontal diseases and chronic kidney disease (CKD). The main mechanisms at the base of this link are malnutrition, vitamin dysregulation, especially of B-group vitamins and of C and D vitamins, oxidative stress, metabolic acidosis and low-grade inflammation. In particular, in hemodialysis (HD) adult patients, an impairment of nutritional status has been observed, induced not only by the HD procedures themselves, but also due to numerous CKD-related comorbidities. The alteration of nutritional assessment induces systemic manifestations that have repercussions on oral health, like oral microbiota dysbiosis, slow healing of wounds related to hypovitaminosis C, and an alteration of the supporting bone structures of the oral cavity related to metabolic acidosis and vitamin D deficiency. Low-grade inflammation has been observed to characterize periodontal diseases locally and, in a systemic manner, CKD contributes to the amplification of the pathological process, bidirectionally. Therefore, CKD and oral disease patients should be managed by a multidisciplinary professional team that can evaluate the possible co-presence of these two pathological conditions, that negatively influence each other, and set up therapeutic strategies to treat them. Once these patients have been identified, they should be included in a follow-up program, characterized by periodic checks in order to manage these pathological conditions.

Background: We compare the accuracy of new intraoral scanners (IOSs) in full-arch digital implant impressions. Methods: A master model with six scan bodies was milled in poly(methyl methacrylate), measured by using a coordinate measuring machine, and scanned 15 times with four IOSs: PrimeScan, Medit i500, Vatech EZ scan, and iTero. The software was developed to identify the position points on each scan body. The 3D position and distance analysis were performed. Results: The average and ± standard deviation of the 3D position analysis was 29 μm ± 6 μm for PrimeScan, 39 μm ± 6 μm for iTero, 48 μm ± 18 μm for Mediti500, and 118 μm ± 24 μm for Vatech EZ scan (p < 0.05). Conclusions: All IOSs are able to make a digital complete implant impression in vitro according to the average misfit value reported in literature (150 μm); however, the 3D distance analysis showed that only the Primescan and iTero presented negligible systematic error sources.

Background: The purpose of this review is to describe the possible effect of toothbrushing on surface roughness of resin-contained CAD/CAM materials., Methods: Systematic literature search for articles published in peer-reviewed journals between January 2000 and February 2020 has been conducted, which evaluated the effect of brushing on surface roughness of resin-contained CAD/CAM dental materials. The research was conducted in Scopus, PubMed/Medline, Web of Science, Embase, and Science Direct using a combination of the following MeSH/Emtree terms: "brushing", "resin-based", "dental", "CAD/CAM", and "surface roughness"., Results: A total of 249 articles were found in the search during initial screening. Fifty-five articles were selected for the full-text evaluation after the steps of reading of abstract/title and remotion of duplicate. Only six articles fulfilled the inclusion criteria. The Cohen's Kappa agreement test showed an index of 0.91 for full-text., Discussion: Four of five selected articles identified an increase of surface roughness on resin-contained CAD/CAM materials after toothbrushing. Although all the articles examined used different toothpastes with no homogeneous relative dentine abrasivity (RDA) and cycles of brushing, the findings are about the same. The possible reason is attributable to the compositions of the resin-contained CAD/CAM materials., Conclusions: The surface roughness of most resin-contained CAD/CAM materials was affected by artificial toothbrushing. Correct knowledge of the composition of the dental material and toothpastes is fundamental to avoid an increase of surface roughness on prosthetic rehabilitation.

Among the chronic non-communicable degenerative diseases (CDNCDs), chronic kidney disease (CKD) represents a global public health problem. Recent studies demonstrate a mutual cause-effect relationship between CKD and oral diseases, in which the presence of one induces the onset and faster progression of the other. In particular, the oral cavity alterations more frequent in CKD patients are: chronic periodontitis diseases, bone lesions, oral infections, and oral cancer lesions. Currently, a standardized therapy for the treatment of oral diseases is lacking. For this reason, natural bioactive compounds (NBCs), characterized by several health effects, such as antioxidant, antimicrobial, anti-inflammatory and anti-cancer actions, represent a new possible adjuvant therapy in the management of these pathological conditions. Among NBCs, polyphenols play a leading role due to positive modulation of oral microbiota, preventing and correcting oral dysbiosis. Moreover, these compounds exert anti-inflammatory effects, such as inhibiting the production of pro-inflammatory cytokines and the expression of cycloxigenase-2. In this light, the formulation of a new mouthwash/gel/gingival paste, with a high content of polyphenols in association with NBCs characterized by antimicrobial action, could represent a future therapy of oral disease in CKD patients.

Objectives: The 3D facial scan technology allows to virtualize the face of the patient, that can be incorporated with other 3D dental images produced by digital scanning of the dental structures. Aim of this study is to investigate the trueness and precision of a low-cost portable face scanner, with two different scan techniques MATERIALS AND METHODS: Ten patients were enrolled for this study and seventeen soft tissue landmarks were selected to perform linear facial measurements, specifically Reference (Ref), Pronasion (Prn), Subnasal (Sn), Exocanthion Left (Ex-L), Exocanthion Right (Ex-R), Pogonion (Pg), Glabella (G), Alar curvature Right (Al-R), Alar curvature Left (Al-L), Zygion Left (Zn-L), Zygion Right (Zn-R), Orbital Left (Or-L), Orbital Right (Or-R), Tragus Right (T-R), Tragus Left (T-L), Chelion Right (Ch-R) and Chelion Left (Ch-L). Interlandmark distances were measured both manually and digitally. For the manual group ten measurements were made using a digital caliper. For digital group measurements were recorded on the patient face scan obtained using an Ipad Pro 3rd Gen. (Apple Store, Cupertino, CA, USA) and Bellus3D Dental Pro-App (Bellus3D, Inc. Campbell, CA, USA) using "face mode" scan with two different scanning techniques, named Free technique (FT) and Slider Technique (ST). Ten measurements were made for each technique. An open-source software (Meshlab; Meshlab) was used to record all the distances. A paired t-test was used to analyze FT and ST results. In order to further evaluate precision and scan repeatability a surface analysis was performed with both scanning techniques using a CAD software (GOM inspect, GOM) and the total differences in absolute 3D deviations were calculated as root mean square., Results: The comparison between manual and digital measurements showed a mean absolute difference of 0.95±0.25 for FT and 1.00±0.29 for the ST. Trueness analysis showed statistically significant differences for the Exocanthion L- Exocanthion R measurement with FT having better performance (P<.05). Precision analysis showed statistically significant differences for G-Pg, Ref-Zn-R and Prn-Zn-R with ST having better performance (P<.05). To achieve all the scans required without any signs of deformation, 184 scans were performed using Free technique and 124 scans using Slider technique. Surface analysis revealed a mean distance of 0.12±0.45 between Free scans and 0.13±0.46 between Slider scans in accordance with the linear measurement analysis CONCLUSION: The study showed that accuracy of low-cost portable scanner can be suitable for clinical use. The use of ST is suggested for a reliable clinical use due to the better precision and an effective reduction of motion artifacts and the lower compliance required to the patients during the scan., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The surface topography of dental implants plays an important role in cell-surface interaction promoting cell adhesion, proliferation and differentiation influencing osseointegration. A hydrophilic implant leads to the absorption of water molecules and subsequently promotes the adhesion of cells to the implant binding protein. Dried salts on the implant surfaces allow one to store the implant surfaces in a dry environment while preserving their hydrophilic characteristics. This process has been identified as "dry technology". The aim of the present study is to describe from a micrometric and nanometric point of view the characteristics of this new bioactivated surface obtained using salts dried on the surface. Topographic analysis, energy-dispersive X-ray spectroscopy, and contact angle characterization were performed on the samples of a sandblasted and dual acid-etched surface (ABT), a nanosurface (Nano) deriving from the former but with the adding of salts air dried and a nanosurface with salts dissolved with distilled water (Nano H 2 O). The analysis revealed promising results for nanostructured surfaces with increased wettability and a more articulated surface nanotopography than the traditional ABT surface. In conclusion, this study validates a new promising ultra-hydrophilic nano surface obtained by sandblasting, double acid etching and surface salt deposition using dry technology.

Dentoalveolar surgery is probably the major risk factor for MRONJ and for other complications following a tooth extraction, especially in patients affected by systemic diseases. The aim of this retrospective study is to evaluate whether a PRF plug inserted in the post extraction socket can prevent the onset of MRONJ. The patients were divided into two groups according to the surgical protocol that included the insertion or not of the PRF following the extraction and all the anamnestic, and clinical data were analyzed. In the control group, 5 patients developed MRONJ (19.23%) while in the study group, any case of MRONJ was reported. In the control group, patients who developed MRONJ had a CTX with less than 100 pg/mL (5 high-risk patients, Spearman's rank r = .547, p < .001). The use of platelet concentrates in patients with high risk of MRONJ is a user-friendly technique with an excellent cost-benefit ratio in oral surgery., Competing Interests: The authors declare no conflict of interest., (Copyright © 2021 Michele Miranda et al.)

The aim of this study is to compare the histological results after socket preservation between dentin mixed with xenograft and dentin alone in tooth graft procedure. Six patients were included in this prospective case series study and treated in three clinical centers using standardized clinical procedures. This clinical trial enrolled patients with three walls post-extractive defects requiring the restoration of bone dimension and shape in mandibular zone. The patients were divided in two groups: extracted teeth alone (first group) and extracted teeth mixed with equal quantity of xenograft (second group). The extracted tooth was cleaned and processed by a recently introduced automated device, that allows fragmentation and partial demineralization of the tooth matrix and used as graft material. The graft obtained in this way, was inserted at the time of the extraction. A covering membrane was used to protect the graft. Implants were placed after 4 months of healing. Bone biopsies of the all grafted sites were taken at the time of implant surgery, for histological analysis. Descriptive statistics was used to synthesize the results, using mean values and standard deviations. Six patients (5 women, mean age at surgery 50.3±12.1 years) were treated and after 4 months of healing both groups, grafts height appeared stable. No signs of infection were present. Bone biopsy were taken in all grafted sites (3 with group one and 3 with group two). The histologic analysis revealed no inflammatory or infective reaction against both groups. The histomorphometry results between the two groups are different. The first group show an amount of new bone greater than the second group (+85.29%) and minor quantity of residual graft (-83.59%). The dentin alone shows a larger amount of new bone., (Copyright 2020 Biolife Sas. www.biolifesas.org.)

Background: New sources of stem cells in adult organisms are constantly emerging. Postnatal Mesenchymal Stem Cells (MSCs), are the most promising support to perform an effective regenerative medicine: such cells have the ability to differentiate into several lineages, such as osteoblasts and chondroblasts, providing novel strategies to improve different complex treatments, during bone regeneration. 3D-printed biomaterials can be designed with geometry aimed to induce stem cells to differentiate towards specific lineage., Objective: The interaction between stem cells easy to isolate and engineered 3D-printed scaffolds can translate the tissue bio-engineering into bone regenerative surgery. For those reasons, to better identify the complexity represented by the activities and responses of MSCs requires the advance of new target therapies which are not current in endocrine, metabolic and immune disorders and yet to be developed., Method: This topical review briefly focuses on the new approaches of translational medicine with the use of MSCs and scaffolds engineered with the aid of 3D-printing technology, highlights the osteogenic functions and addresses their applications across the breadth of regenerative medicine., Results: The application of bone constructs consisting of the engineered scaffold and MSCs as well as the aspects related to the optimal scaffold geometry that favours the best MSCs differentiation and the improvement of concepts as "sensing surface" were also discussed., Conclusion: Regenerative surgery is largely growing in the field of translational medicine. The use of new sources of MSCs and the improvement of new concepts of bio-engineered scaffolds will certainly be the next step of customized medicine., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

Purpose: The purpose of this retrospective investigation was to evaluate the use of a prefabricated bar system for immediately loaded implants placed and restored according to the All-on-Four concept with up to 24-month follow-up., Materials and Methods: A total of 51 patients (31 males and 20 females; mean age 63.4 years) presented with edentulous or partially edentulous jaws with severe atrophy of the posterior regions. All patients were treated with full-arch fixed prostheses (28 maxillary, 34 mandibular) each supported by four implants (two vertical, two distally tilted). The implants were immediately loaded with screw-retained full-arch restorations. Each prosthesis was supported by a prefabricated metal bar combined with high-density acrylic resin. Follow-up visits were scheduled at 6, 12, and 24 months after initial prosthetic loading. Intraoral radiographs were obtained immediately after surgery and at each follow-up visit by using a custom radiograph holder and parallel technique. Marginal bone levels were assessed using digital image analysis. Implant and prosthetic survival and success rates were evaluated. Patient satisfaction was further assessed using a 100-mm visual analog scale (VAS). Data were compared by means of the Mantel-Haenszel test., Results: No drop-outs occurred. The overall implant survival rates were 100% and 98.38% for the vertical and tilted implants respectively. Two of the 62 definitive fixed prostheses were lost during the observation period due to implant failure. Since restoration replacement due to implant failure was not judged a prosthodontic failure according to the survival criteria provided in this study, the overall prosthetic survival rate was 100%. No statistically significant differences in marginal bone levels between vertical and tilted implants were detected at 24-month follow-up evaluation in either jaw. All participants were functionally and esthetically satisfied with their definitive restorations after 2 years functioning, as confirmed by the average VAS scores (masticatory function: 99.7; phonetic function: 99.5, esthetics: 99.2)., Conclusions: The preliminary 24-month results indicate that immediate loading of vertical and tilted implants using the evaluated prefabricated bar system may be a viable solution for edentulous jaw rehabilitation; however, more long-term prospective clinical trials are needed to affirm the effectiveness of this surgical-prosthetic protocol., (© 2015 by the American College of Prosthodontists.)

Background: Gut microbiota is implied in obesity, because of its ability to harvest energy from diet, and in the regulation of behavior. Given the link between gut microbiota, body composition, obesity, and anxiety, the aim of this study was to evaluate the effects of a new psychobiotic formulation., Methods: Eligible patients were randomly divided into three groups: psychobiotics oral suspension group (POSG); dietary treatment group (DTG); combined treatment group (CTG). All subjects underwent body composition and psychological profile evaluation., Results: Significant changes in body composition parameters in each group were relieved after all treatments. Hamilton anxiety rating scale (HAM-A) highlighted a significant reduction of the total score for all study population after treatments in POSG ( p = 0.01) and CTG ( p = 0.04). A reduction of HAM-A total score in anxious subjects in POSG or CTG and a significant reduction of positive subjects for HAM-A in POSG ( p = 0.03) and in CDG ( p = 0.01) were shown., Discussion: Three-week intake of selected POS represents a good approach to solve problems related to obesity and behavior disorders. However, new clinical trials need to be performed on a larger population and for a longer period of treatment before definitive conclusions can be made. This trial is registered with NCT01890070.

The oral anticoagulant therapy is used for the cure and the prevention of thromboembolic diseases. In the last fifty years the warfarin has been considered the oral anticoagulant of choice. However, its use is limited by a narrow therapeutic index and by a complex pharmacodynamics, which requires regular adjustments and monitoring of the dose. Recently, three new oral anticoagulant - dabigatran etexilato (direct thrombin inhibitor), rivaroxaban and apixaban (Xa factor direct inhibitor) - have been approved for use in europe. Increasing the number of patients taking these drugs, it is important that the dentist knows these new oral anticoagulants, their indications and methods of action, in particular for the management of patients, who require invasive treatments. With regard to the management of the patient threated with the new oral anticoagulants (NAO), there have been new significant changes in the procedure compared to the one followed by patients treated with warfarin. This led to the development of new guidelines that the dentist has to follow in order to ensure a safe and appropriate dental treatment and reduce any postoperative complications. The aim of this work is to evaluate the effectiveness of the new oral anticoagulants compared to warfarin, especially in terms of risks of bleeding events and intra and postoperative complications, in patients requiring multiple dental extractions.

Purpose: Granulation tissue containing reactive soft tissue with potential multipotent stem cells can help socket healing following extraction. The aim of this study was to assess bone healing of maxillary large bone defects while maintaining reactive soft tissue., Materials and Methods: A total of 32 patients presenting large bone defects were selected for this prospective study. Eight patients (Group A) presented with large bone defects but an intact buccal cortical plate, while 24 patients (Group B) presented with large bone defects lacking a buccal cortical plate. Teeth were extracted, and reactive soft tissue was left in the defects. Bone volume was assessed through cone beam computed tomography (CBCT) both before tooth extraction and at 4 months. A histomorphometric evaluation was performed., Results: CBCT and cylinder bone cores were obtained for histology and histomorphometry analysis. At 4 months after tooth extraction, CBCT showed bone volume preservation and bone formation and no statistically significant difference in bone volume before and after tooth extraction in group A. However, in group B, over the same time period, a statistically significant increase (P < .01) of vertical bone volume was reported. Biopsy specimens showed the presence of vital bone in the defects 4 months later., Conclusion: Reactive soft tissue left in large bone defects after tooth extraction may support a significant bone volume gain and vital bone formation.

Due to the brittleness and limited tensile strength of the veneering glass-ceramic materials, the methods that combine strong core material (as zirconia or alumina) are still under debate. The present study aims to evaluate the fracture strength and the mechanism of failure through fractographic analysis of single all-ceramic crowns supported by implants. Forty premolar cores were fabricated with CAD/CAM technology using alumina (n = 20) and zirconia (n = 20). The specimens were veneered with glass-ceramic, cemented on titanium abutments, and subjected to loading test until fracture. SEM fractographic analysis was also performed. The fracture load was 1165 (±509) N for alumina and 1638 (±662) N for zirconia with a statistically significant difference between the two groups (P = 0.026). Fractographic analysis of alumina-glass-ceramic crowns, showed the presence of catastrophic cracks through the entire thickness of the alumina core; for the zirconia-glass-ceramic crowns, the cracks involved mainly the thickness of the ceramic veneering layer. The sandblast procedure of the zirconia core influenced crack path deflection. Few samples (n = 3) showed limited microcracks of the zirconia core. Zirconia showed a significantly higher fracture strength value in implant-supported restorations, indicating the role played by the high resistant cores for premolar crowns.

Up to 25% of patients with primary hyperparathyroidism have ectopic parathyroid adenoma. A 45-year-old formerly obese woman underwent extended thymectomy for a parathyroid adenoma located in hyperplastic thymic tissue, associated with primary hyperparathyroidism and severe vitamin D deficiency, but normal bone mineral density. At nine months follow-up, all laboratory test results were within normal limits and she presented no symptoms and no recurrence of disease. In this case, autonomous growth of a parathyroid adenoma was reasonably secondary to chronic calcium and vitamin D malabsorption, which often occurs after bariatric surgery for pathologic obesity.

The VIII Municipality of Rome is characterized by a high poverty rate, by the presence of many immigrant communities and by the lack of health services available to vulnerable social groups. In 2005 , the " Servizio di Medicina Solidale" of the University Hospital of "Tor Vergata", for the first time intervened in this Municipality regarding Immigrant Health. The paper describes the activities and organization of this service from January 2005 to December 2007. It demonstrates a complex epidemiological picture of 2,374 immigrants, characterized by a young population, mostly women with reproductive health issues, followed by children with infectious and nutritional problems and, ultimately, adults who accessed the service, firstly for gastroenterological problems, secondly for cardiovascular problems and finally for dysmetabolic disorders. The paper describes the culture-centered actions of Health Promotion and Health Education in order to improve health awareness and promote integration of immigrants. The study indicates that the limited number of hospital admissions ( n.20) with respect to the number of outpatient visits (n.70.000) in the first seven years of the service " Medicina Solidale" has significantly reduced the number of unnecessary admissions to emergency wards. In conclusion it is notable that the cost of such intervention results eight times inferior to emergency admissions and further confirms that a Community medicine approach is sustainable.

Background: Marcus Gunn jaw-winking synkinesis (MGJWS) is characterized by eyelid ptosis, which disappears during jaw movement. Familial MGJWS is an extremely rare condition. Some authors suggested that MGJWS is due to neural misdirection in the brainstem whereas others suggested that aberrant reinnervation or ephapse may be responsible for synkinetic activity. Pathogenesis of this condition is therefore still unclear., Methodology/principal Findings: To investigate pathogenetic mechanism in familial MGJWS we performed neurophysiological (EMG, Blink Reflex, Recovery cycle of the R2 component of the blink reflex, Masseter inhibitory reflex, BAEPS and kinematic analysis) and neuroradiological (MRI, Diffusion Tensor Imaging) investigations in a member of a multigenerational family with autosomal dominant Marcus Gunn jaw-winking synkinesis (MGJWS). Kinematic analysis of eyelid and jaw movements disclosed a similar onset and offset of the eyelid and jaw in both the opening and closing phases. The excitability of brainstem circuits, as assessed by the blink reflex recovery cycle and recovery index, was normal. Diffusion Tensor Imaging revealed reduced fractional anisotropy within the midbrain tegmentum., Conclusions/significance: Kinematic and MRI findings point to a brainstem structural abnormality in our familial MGJWS patient thus supporting the hypothesis of a neural misdirection of trigeminal motor axons to the elevator palpebralis muscle.

The severe atrophy of the jaws are a challenging therapeutic problem, since the increase in bone is necessary to allow the placement of a sufficient number of implants. Combining immediate functionalization with the concept of guided surgery they combine the advantages offered by the innovative surgical and prosthetic implant technique (All-on-Four(®)) with those of computer-assisted planning in cases of severe bone atrophy. The method used in this case report, combines these two concepts in a surgical and prosthetic protocol safe and effective for the immediate function of 4 implants to support a fixed prosthesis in completely edentulous subjects. The integration of technology with immediate function with the concept of computer-guided surgery for implant placement and rehabilitation of completely edentulous jaws is now a predictable treatment modality with implant survival comparable to the traditional protocols.

The osteonecrosis of the maxillares caused by bisphosphonates (OMB) either wrongly known or not reconised in earlier times became nowadays very important among the dentists and maxillo-facials surgeons because of the potential serious consequences that might bring in the oral cave of the patients, who are suffering already for their base condition. The goal of our work was to verify if a deep treatment and an attentive observation with a close follow-up can bring to the resolution of serious cases of ostenecrosis of the maxillares by bisphosphonantes. Although without a statistic value our case report put the basis for a chance to execute wider casistic studies.

SCOPE OF WORK.: To evaluate the results obtained from the use of removable orthodontic aligners in patients with periodontal and systemic issues to improve the aesthetics of the smile. MATERIALS AND METHODS.: Invisalign technique, a new technique based on the use of orthodontic removable transparent overlay representing the mechanotherapy. This technique through a dedicated software (Clin-Check) enables you to view the 3D resolution of the malocclusion. RESULTS.: In the case study examined the results support the Invisalign treatment in periodontal patients with a systemic disease, both for an easier home oral hygiene and also to maintain alignment and an aesthetic smile achieved without the use of invasive techniques. CONCLUSION.: The Invisalign orthodontic treatment is ideal for patients with periodontal problems. The removal of the masks ensures control of normal oral hygiene but also requires the cooperation of the patient during the treatment.

In oral surgery, the last phase of a surgical operation is represented by the tissues suture, that allows the wound lips edges approximation and their stabilization, to promote haemostasis, to avoid the alimentary residues accumulation on the incision line and allow the first intention healing. A good suture avoids that the displacing forces generated by the muscular insertions, functional movements and by the external agents destabilize or cause the surgical wound deiscence. The purpose of this study was to re-examine the suture threads characteristics, properties and biological interactions evaluating the different studies published in literature results and conclusions. In conclusion, the authors recommended the use of the different suture threads on the dependence of the oral surgery operation type that must be performed, of the patient compliance and of the various suture materials physical and biocompatibility characteristics.

Aim of the Work: Aim of this work is to evaluate the efficacy of the Partsch I surgical technique which is considered to be first choice in the treatment of cystic lesions according to the international literature and also to evaluate the regeneration capacity of the bone tissue without any grafting procedure., Materials and Methods: The patient reported pain in the second quadrant. The objective intraoral examination showed a swelling which was of a hard-elastic consistency and, the x-ray, opt and ct scan exams showed an osteolitic lesion which expanded from the element 2.3 to the elment 2.6 involving the maxillary sinus, too. The lesion was removed by the Partsch I method after disinfecting and shaping the radicular canals of the 2.3 element. It was assessed that the maxillary sinus requested no treatment for the presence of a thin cortical layer residue. The removed neoformation was then sent to the Anatomy and Histology Pathology Service., Results: The histologic test confirmed the radicular origin of the odontogenic neoformation containing a necrotic-hemorrhage. Clinically the post-operative course showed no complications, with a good healing of the bone tissue and there was no oral-antral communications., Conclusions: The clinical results obtained confirmed the validity of the enucleation technique in the treatment of cystic neoformations. Such approach has always to be preferred because it presents no intraoperative risks, especially for what it concerns the post-operative course. It has also been confirmed the great capacity for the bone tissue to regenerate following the organization of the hematic coagulum.

Purpose: The research presented is aimed at the characterization of the mechanical resistance of an innovative system of an abutment-fixture connection in dental implants. This innovative connection system is composed of a triangular prismatic connection designed to improve the anti-rotational properties of the implant, and to seal any gap between the abutment and the fixture., Methods: The mechanical performances of the dental implant system were investigated by means of static mechanical strength tests, which allowed the identification of the bending, torque and compression resistance of the system, and fatigue testing, according to the practice standard - ISO 14801. Surface finishing was also analyzed by scanning electron microscopy (SEM) observations and laser profilometry tests., Results: The analyzed implant exhibited good mechanical characteristics, both in static and in fatigue tests. Moreover, the gap between the fixture and the abutment detected by SEM analyses was restricted, both before and after fatigue tests, being approximately 4 mum in the worst case observed: this is representative of optimal sealing against fluid infiltration., Conclusions: The modification of traditional dental implants with the introduction of a triangular prismatic connection system not only allowed the implant rotational stability and sealing performances to increase, but also conferred optimal mechanical resistance to the implant.

In the last 15 years the increasing aesthetic demand, push constantly industry and the clinical to entirely look for new solutions for the realization of all-ceramic crowns, with such characteristics to be used for both anterior and posterior restorations. The most greater contribution, in such sense derives from the finished progress in the computer sector, that have allowed the application of the technologies CAD-CAM, also in dentistry (2-5, 11). These systematics have allowed us to get "automatically" structures for dental prosthesis, starting from the scanning of the die and passing for an intermediary phase of computerized planning (CAD, computer aided design), through numerical control millers (CAM, computer aided manufacturing), enslaved to calculating the electronic that drives the movement of it. The aim of this work is therefore that to analyze and to describe the systematic computerized 3SHAPE verifying the degree of precision, through the analysis of the obtainable marginal closing with the zirconia frameworks.

Gingival overgrowth induced by calcium channel blockers can cause significant disfigurement and functional difficulty since it interferes with eating and speech, prevents effective plaque control, and disturbs occlusal relationships. It occurs more in young and male patients. The aim of this paper is to study the physiopathology of gingival overgrowth induced by calcium channel blockers and propose different choices of treatment.

This study aims at evaluating the effects of lung volume reduction versus respiratory rehabilitation on quality of life, assessed by three different questionnaires. Sixty emphysematous patients were randomised by computer to receive either surgery (n = 30) or rehabilitation (n = 30). Life quality was evaluated by the Nottingham Health Profile, the Short Form (SF)-36 item and the St George's questionnaires. As reported previously, dyspnoea index, forced expiratory volume in one second, residual volume, 6-min walk test and arterial oxygen tension improved after surgery more than after rehabilitation. Quality of life was significantly improved after surgery as follows Nottingham Health Profile physical mobility; SF-36 physical and social functioning, mental and general health, emotional role; St George's general, activity. At multivariate analysis 6- and 12-month changes after surgery of Short Form-36 physical functioning, general health, and St George's activity domains were significantly correlated with forced expiratory volume in one second, while Short Form-36 social functioning and Nottingham Health Profile isolation correlated with residual volume. Functional and especially symptomatic improvements persisted: dyspnoea index, residual volume, and Short Form-36 and St Georges's physical scores were still significant at 4 yrs. Surgery produces greater and longer effects than rehabilitation on quality of life by improving both physical and psychosocial domains. Symptomatic improvements persisted at 4 yrs.

Background: Although simple lung or liver metastasectomy from colorectal cancer have proved effective in selected patients, the value of simultaneous biorgan metastasectomies is still debated., Study Design: Of 155 patients who underwent operation for lung or liver colorectal metastases between March 1987 and December 1998, we retrospectively reviewed 29 patients who presented simultaneous (n = 12) or sequential liver-->lung (n = 10) and lung-->liver (n = 7) metastases. All metastases were successfully resected in a total of 56 separate procedures. In 35 thoracic procedures, 45 metastases were removed by wedge resection (n = 36) or lobectomy (n = 9). In addition, 47 liver metastases were resected with wedge (n = 24), segmentectomy (n = 13), or lobectomy (n = 10). There were no perioperative deaths and the morbidity rate was low (10.7%). All patients were followed for a minimum of 3 years. Factors possibly influencing survival were evaluated by univariate and subsequently by multivariate analyses., Results: Median survival from the second metastasectomy was 41 months, with a 5-year survival rate of 51.3%. Risk factor distribution among the three metastastic pattern groups was insignificant. Premetastasectomy elevated levels of both CEA and CA19-9 (p = 0.0001), and mediastinal or celiac lymph node status (p = 0.03) were significantly associated with survival in the univariate analysis, although number of metastasectomies, disease-free interval, and simultaneous versus sequential diagnosis were not. In the multivariate analysis, only elevated CEA plus CA19-9 (p = 0.01) was significantly associated with survival., Conclusions: We conclude that either simultaneous or sequential lung and liver metastasectomy can be successfully treated by surgery. Poor results were obtained in the presence of high levels of CEA plus CA19-9.

Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.