Search

Abstract Background Scapular osteotomy for malunion can lead to resolution of pain and functional improvement in scapula fracture sequelae. Understanding three-dimensional bone morphology and analysing post-traumatic deformity is the main step of planning and the key to success of the procedure. 3D models and patient-specific guides are a growing technology to enhance accuracy of planning and to assist during surgery. Case presentation We report the case of a 50 years old male, complaining of pain and limited function after a malunited scapular body fracture. Clinical assessment showed a severe impairment of shoulder function with active and passive forward flexion limited to 80°, absent external rotation, and internal rotation limited to the buttock. X-rays and CT scan showed an excessive lateral border offset of 53 mm and complete displacement of the glenoid segment anteriorly and medially to the scapular body, with impingement between the lateral most prominent scapular bone spur and humeral shaft. Glenopolar angle was 19°, scapular body angulation on the sagittal plane was 12°. Corrective osteotomy was planned on a virtual interactive rendering and on 3D printed models. Patient-specific guides were developed to perform a body-spine osteotomy with removal of a bone wedge, and a glenoid-spine osteotomy; a patient-specific wedge spacer was used to hold the reduction during plate fixation. Follow-up up to 12 months after surgery demonstrated improvement in scapula anatomy, shoulder girdle function, and patient-reported outcomes. Conclusions For the first time in scapula malunion surgery, patient-specific osteotomy guides were succesfully used during surgery to perform osteotomies and to assist in reduction maneuvers.

One of the goals of Industry 4.0 is to increase the transparency of the value chain through modern tools in production processes. This article aims to discuss the possibility of increasing the efficiency of a production system by modernizing it with the use of computer modelling tools. This article describes a method for the simulation modelling of a selected production system using the specialized FlexSim 2023 software in a 3D environment. The results and benefits of the practical application of the object-oriented modelling are presented, as well as the possibilities of collecting simulation data used to optimize production processes. The analyses were conducted at a selected production plant in a case study. The research assessed the effectiveness of the existing system and determined the impact of process changes in the event of the introduction of a new design solution. The simulation identified bottlenecks in the material flow. The basis for creating the simulation model was the analysis of the technological process. A simulation model for a real situation was created, and a simulation model was designed to identify and indicate a solution to eliminate the detection of the bottleneck. The problem area identified using visualization in the technological process slowed down the entire production process and contributed to time and economic losses. Thus, the authors confirmed the thesis that the simulation modelling of production systems using the FlexSim program can help eliminate bottlenecks and increase the efficiency of human resource use. At the same time, the use of this tool can lead to increased efficiency, reduced costs and improved sustainability and other performance indicators important for modern production environments as part of the promoted Industry 4.0 idea. A noticeable result of these changes was an increase in production from about 80–90 units. In addition, it was noticed that the condition of the machines preceding the stand changed.

This study aimed to analyze the aerodynamic characteristics of Chinese Nordic combined athletes during the ski jump take-off process, comparing them with elite athletes from the 2009 Nordic World Ski Championships using computational fluid dynamics (CFD) methods. Methods: Using 3D model analysis and continuous relative phase analysis, CFD methods were utilized to assess the mechanical characteristics of athletes during the take-off phase. Results: The analysis revealed that Chinese athletes displayed a lower dominance of the knee joint during the take-off phase, leading to increased air drag. Conclusion: Reduced knee joint dominance and an excessive ankle angle at the initiation of the ski jump take-off contribute to higher air drag. The lean angle of the body and the ankle angle post-take-off significantly affect the resultant lift and drag forces.

Three-dimensional printing has become a fast-growing industry. The first phase of this technology is the design of a 3D object to personalize it and optimize its production. This paper explores the procedural generation of the 3D model. The article aims to present the method of procedurally generating 3D objects in Python. Procedural content generation is the automated creation of content using algorithms. Most often, as part of procedural generation, a small number of input parameters and pseudo-random processes are used to generate content that will meet the requirements. The programming techniques for object customization in Python optimize the manufacturing process. Moreover, procedural generation speeds up the model design, and if developers use 3D scanning methods and artificial intelligence, production can be personalized, which is in line with the concept of Industry 4.0.

This paper investigates the impact of flood-induced hydrodynamic forces and high discharge on the masonry arch “Hannibal Bridge” (called “Ponte di Annibale” in Italy) using the Hydraulic Engineering Center’s River Analysis Simulation (HEC-RAS) v6.5.0. hydraulic numerical method, incorporating Unmanned Aerial Vehicle (UAV) photogrammetry and aerial Light Detection and Ranging (LIDAR) data for visual analysis. The research highlights the highly transient behavior of fast flood flows, particularly when carrying debris, and their effect on bridge superstructures. Utilizing a Digital Elevation Model to extract cross-sectional and elevation data, the research examined 23 profiles over 800 m of the river. The results indicate that the maximum allowable water depth in front of the bridge is 4.73 m, with a Manning’s coefficient of 0.03 and a longitudinal slope of 9 m per kilometer. Therefore, a novel method to identify the risks through HEC-RAS modeling significantly improves the conservation of masonry bridges by providing precise topographical and hydrological data for accurate simulations. Moreover, the detailed information obtained from LIDAR and UAV photogrammetry about the bridge’s materials and structures can be incorporated into the conservation models. This comprehensive approach ensures that preservation efforts are not only addressing the immediate hydrodynamic threats but are also informed by a thorough understanding of the bridge’s structural and material conditions. Understanding rating curves is essential for water management and flood forecasting, with the study confirming a Manning roughness coefficient of 0.03 as suitable for smooth open-channel flows and emphasizing the importance of geomorphological conditions in hydraulic simulation.

The Channichthyidae, a monophyletic fish group belonging to the suborder Notothenioidei, are uniquely adapted to the polar environment. However, while their physiology has been extensively studied, studies on their ecology are relatively rare. Here, we investigated the trophic ecology of seven icefish species (Chaenodraco wilsoni, Chionobathyscus dewitti, Chionodraco hamatus, Dacodraco hunteri, Neopagetopis ionah, Pagetodes antarcticus and Pagetopsis macropterus) by using the traditional morphometric approach to assess the relationship between form and feeding function. The suction index (SI), the mechanical advantage in jaw closing (MA) and nine morphological traits related to feeding structures have been analysed. Icefish species are characterised by non-protractible, elongate jaws and a wide gape; such morphological features influence the low values of both MA and SI, supporting their ram-feeding habit. The ecomorphological differences among species resulted mainly determined by the anatomical structures related to SI. Such differences do not seem to be determined primarily by the type of prey, as is the case in other taxonomic groups of Notothenioidei, but rather by phylogenetic proximity. A 3D animation was developed to visualise the different feeding modes of two icefish species (C. hamatus and P. macropterus) which are characterised by different approaches to prey.

Mapping the terrain and the Earth’s surface can be performed through non-contact methoYes, that is correct.ds such as laser scanning. This is one of the most dynamic and effective data collection methods. This case study aims to analyze the usability of spatial data from available sources and to choose the appropriate solutions and procedures for processing the point cloud of the area of interest obtained from available web applications. The processing of the point cloud obtained by airborne laser scanning results in digital terrain models created in selected software. The study also included modeling of different types of residential development, and the results were evaluated. Different data sources may have compatibility issues, which means that the position of the same object from different spatial data databases may not be identical. To address this, deviations of the corresponding points were determined from various data sources such as Real Estate Cadaster, ZBGIS Buildings, LiDAR point cloud, orthophoto mosaic, and geodetic measurements. These deviations were analyzed according to their size and orientation, with the average deviations ranging from 0.22 to 0.34 m and standard deviations from 0.11 to 0.20 m. The Real Estate Cadaster was used as the correct basis for comparison. The area of the building was also compared, with the slightest difference being present between the Real Estate Cadaster and geodetic measurement. The difference was zero after rounding the area to whole numbers. The maximum area difference was +5 m2 for ZBGIS Buildings.

The medieval wall of Jaén is a historical monument that has suffered from the apathy of institutions in recent years, causing its calamitous current status. This study focuses on the previous geomatic tasks developed to obtain a 3D documentation of this site in order to manage future restoration works. The methodology included the integration of data obtained using several geomatic techniques, such as LiDAR and photogrammetry at three scale levels, from the general to the particular. Therefore, data fusion is the main aspect of this methodology, developed in an attempt to take advantage of the benefits of each technique. The application demonstrated the feasibility of using the methodology in order to obtain a complete documentation, including 3D models, orthoimages and DEMs, at several scales with different resolutions and point densities. In addition, we also considered the accuracy of data and products with respect to the project requirements. Another aspect to highlight is the reduction in acquisition time by minimizing the necessity of conducting classic surveying to obtain georeference data. The results show reliable products for supporting restoration tasks and allowing the development of a BIM application to manage them, but also for the dissemination of knowledge regarding this unknown monument.

The Büyük Menderes Graben (BMG) is an E-W oriented active extensional geothermal basin within the Menderes Massif, a metamorphic core complex, in Western Anatolia, Turkey. 1500 (megawatts-energy) MWe of installed geothermal capacity for power production exist as of December 2019 in Western Anatolia, mostly generated in the BMG. While the BMG is a vastly producing geothermal resource, it is predicted that it has higher production potential. However, other studies do not include field scale 3D geologic models or geothermal gradient maps. This study aims to first quantitatively test the geothermal gradients in the Aydın-İncirliova-Osmanbükü Geothermal Field (IGF), then map the information. This study also aims to compare the IGF with a neighboring geothermal field. To complete this study, information from stratigraphic columns, bottom hole temperatures, and continuous temperature logs from 13 geothermal wells is utilized with Leapfrog Geothermal to create 3D models of the geology and subsurface temperature distribution. Then, isothermal contour maps of the field are created. The geologic modeling suggests that synextensional deposition has occurred within the graben. The temperature modeling suggests both that thermal breakthrough may have occurred in the field, and that the IGF has a higher geothermal gradient than the nearby Germencik Geothermal Field

Abstract The article proposes using a novel hybrid measurement method, with expected precision results, to determine the characteristic of the historic, 17th-century bell. In an interdisciplinary approach, modern and non-invasive physical and chemical measurement methods were used. Based on the monitoring (measurements and laser scanning), a three-dimensional geometric model was built to calculate the bell size and analyze its condition depending on material consumption. Next, chemical measures of the bell samples were carried out to determine the material properties. For that purpose, advanced precision microscopic techniques were used. Based on the geometric model and chemical studies, the material properties and density of the bronze were determined using additive assumptions. Measurement accuracy and data quality were evaluated statistically. The method allows reliably determining the bell's weight without needing to dismantle it or external intervention. The approach is helpful for practitioners performing conservation work on such objects.

The article discusses a new mobile robotic platform with an autonomous stabilization system for reconnaissance operations. A developed 3D model of a mobile robotic platform with an autonomous stabilization system for reconnaissance operations is presented. The main stages of designing a model of a movable mounting block for optical sensors of a mobile platform are described. The modularity and functionality of the optical sensor mounting block is ensured. The mounting block provides several options for mounting cameras: two cameras or one camera at the same time. Such modularity makes it possible to change the variability of the equipment on the camera mounting block. The optical sensor mounting block consists of several parts: the base, the main frame, the auxiliary mount, the camera mount, and the thermal imager mount. Drawings of 3D models of each constituent element are given. The description of the process of preparation of the technology for manufacturing a prototype of a movable mount for optical sensors based on 3D printing by FDM technology is given. Using the example of a cylindrical base for a block of optical sensors, all the features of setting up 3D printing technology are described.

The article highlights the trend of increasing demand for industrial robotics in mechanical assembly industries in recent years. A brief analytical review of PP for the automated solution of problems of industrial robotics in mechanical assembly productions of machine and instrument engineering was performed. A critical analysis of the most common PPs was carried out regarding their functional capabilities in the technological preparation of robotic systems, supported operating systems, auxiliary software, and the price component. The above information is summarized in the form of a table, which indicates the presence of the main analyzed possibilities of PP. The results of a critical analysis of the most well-known PP based on available information sources regarding functionality and application options at the stages of planning, design, programming of robotic systems showed that at the moment there is no universal PP or software solution that can meet modern production requirements. Positive trends in the application show open source PPs, which provide flexibility in application, but require the user to be highly qualified in robotics and programming, but even they do not guarantee the complete solution of tasks of scientific research and engineering content.

This paper describes the physical model of the penetrating thermoelement with the developed surface of warmth exchange for the cooling of the air’s flow. It presents the theory of the calculation and the method of the computer modeling of the temperature’s and potential’s allocation, the definition of the effectiveness of the energy’s transformation – the cooling factor and the cooling efficiency. This work researches the 3D temperature’s and materials’ allocation for the material of the branches of the thermoelement based on Bi2Te3.