Search

Global waste management challenges demand innovative and multi-functional solutions. The Nordic Biogas Model (NBM) based on anaerobic digestion of organic waste and valorization of its outputs provides several benefits beyond waste treatment such as energy recovery, nutrient recycling and climate impact mitigation. Despite these benefits, its international adoption remains limited, revealing an implementation gap. One way to address this gap is to adapt technology and knowledge from the provider to each specific context. This involves the embedding of the technology into the local context and the development of conditions such as formal and informal institutions over time. Based on decade-long interactions with Nordic companies and municipal decision-makers, we highlight the importance of communication between the technology provider and potential adopter, to ensure that the diverse sustainability benefits of NBM are acknowledged. Furthermore, most provider companies can benefit from a systematic guideline that supports early-stage decision-making as an essential component of the adaptation and implementation of the NBM in diverse international contexts. In this article, we offer suggestions for both: (1) how to better communicate the sustainability benefits of the NBM, and (2) how to assess the risk and opportunities of entering new markets at the early stages of decision-making. [ABSTRACT FROM AUTHOR]

Assessing the eco‐efficiency of municipalities regarding the provision of solid waste services is a useful tool for improving its sustainability. However, robust, and reliable methods are needed to benchmark the performance of municipalities. Data envelopment analysis (DEA) methods typically used to assess the eco‐efficiency of municipal solid waste (MSW) service providers. However, the variables used in the eco‐efficiency assessment bear distinct weights for each individual unit, limiting thus interpretation. Therefore, benchmarking the performance of MSW service providers becomes challenging because different conditions are applied. Thus, this study uses a common set weights DEA (DEA‐CSW) model assess the eco‐efficiency of different municipalities in providing MSW services. Eco‐efficiency scores were estimated by integrating total costs, recycled waste and unsorted waste as input, desirable outputs and undesirable outputs, respectively. The empirical application of the model demonstrated that when using DEA‐CSW, only one municipality (out of 36) was eco‐efficient in managing MSW. The weightings for inputs and outputs were allocated based on the degree of satisfaction estimated for each municipality. Satisfaction ranged from 0.829 to 1.000 indicating that none of the municipalities were heavily penalized based on the eco‐efficiency scores estimation when allocating common weights. In conclusion, this study demonstrates that compared to traditional DEA models, the DEA‐CSW approach is more adequate at benchmarking the performance of municipalities regarding the provision of MSW services. [ABSTRACT FROM AUTHOR]

The main aim of this article is to analyze the circular economy (CE) transition of European countries between 2014 and 2021, using the European Commission approach of production and consumption, waste management, secondary raw materials, and competitiveness and innovation. To do so, we have built a multidimensional Circular Economy Index that classifies European countries according to their progress towards a circular economy. We used data from the Eurostat database and extracted all circular economy indicators for the EU27 countries plus Liechtenstein, Norway, Switzerland, the United Kingdom, and Iceland. The time series starts in 2014 and ends in 2021 and we have used 15 variables grouped in four dimensions by means of a second order factor analysis with a Promax rotation. We have also applied a hierarchical cluster analysis to group countries by circular economy performance. Our results suggest an improvement in circular economy performance between 2014 and 2021 in Europe. We likewise find there is a 'four‐speed Europe' in terms of a circular economy, highlighting the good results of the Netherlands, Germany, Italy, and Belgium. [ABSTRACT FROM AUTHOR]

The increasing need for harvests, resources, and facilities is associated with significant biowaste production from agricultural processes. Although the waste is nutrient-rich, it may become refinement lands for ailment-triggering bacteria when not managed correctly. The waste can be transformed into raw materials for valuable crops or sources of environmentally friendly energy. Therefore, this study examined agricultural waste management strategies as Indonesia's sustainable renewable energy source. SWOT and TOPSIS methods were used to identify the optimal approach for advancing renewable energy in Riau Province, while multiple respondents participated in identifying critical criteria and evaluating each option. The results showed that based on SWOT analysis, the Strength–Opportunity (SO) factor favored using agricultural waste for renewable energy in Indonesia. Furthermore, TOPSIS analysis indicated that Alternative A2 (Bioethanol) had the most significant distance among the alternatives, with a weight of 0.825. Future studies are needed to provide more accurate results and improve the current understanding regarding the evolution of renewable energy in Indonesia. Additionally, in-depth investigations should prioritize increased consumer awareness of renewable consumption, higher producer productivity, and strengthened policies. [ABSTRACT FROM AUTHOR]

The escalating global food waste crisis presents both a challenge and an opportunity for sustainable development. Every year, millions of tons of food are wasted, contributing to environmental degradation and resource inefficiency. This wasted food not only represents a loss of valuable resources but also contributes to significant greenhouse gas emissions when disposed of in landfills. In response to this pressing issue, food waste valorization biorefineries have emerged as a promising solution, transforming waste into valuable bioproducts through innovative biotechnological processes. This review critically examines recent trends in food waste biorefining, focusing on the latest advancements in microbial and enzymatic conversion technologies. Various valorization pathways that convert food waste into biofuels, biochemicals, and bio-based materials are explored, thereby integrating principles of the circular economy to minimize waste and maximize resource utilization. Key developments in the field include the optimization of microbial consortia for enhanced degradation and conversion efficiency, as well as the engineering of enzymes to improve specificity and activity. These advancements have led to significant improvements in the efficiency and feasibility of converting food waste into high-value products. The environmental benefits of these biorefineries are also discussed in depth, encompassing the reduction of greenhouse gas emissions, decreased reliance on fossil fuels, and the mitigation of environmental pollution. By diverting food waste from landfills and transforming it into renewable resources, these biorefineries play a crucial role in promoting environmental sustainability. Despite these advancements, several challenges remain. Feedstock variability affects process consistency, leading to fluctuations in product yield and quality. There is a need for process optimization to improve yield and cost-effectiveness, ensuring that biorefinery operations are economically viable at an industrial scale. Issues related to scalability and industrial implementation, such as the development of infrastructure and supply chains, also pose significant hurdles. By synthesizing current research, this review underscores the considerable potential of food waste biorefineries to contribute to sustainable agriculture and biocatalysis. Critical gaps in knowledge are identified, and areas for future research are proposed, such as developing robust and flexible biorefining systems capable of handling diverse feedstocks and integrating advanced biotechnological tools for process monitoring and control. The review also highlights the importance of interdisciplinary collaboration and public-private partnerships in driving innovation and commercialization in this field. Ultimately, this review aims to provide a comprehensive understanding of the current state of food waste biorefining and to offer a roadmap for future research and industrial implementation. By highlighting the role of these biorefineries in achieving sustainable development goals, the review emphasizes the need for continued research, technological innovation, and supportive policy frameworks. Through these efforts, food waste valorization biorefineries can play a pivotal role in creating a sustainable and resilient future, addressing both environmental and economic challenges posed by food waste. [ABSTRACT FROM AUTHOR]

BACKGROUND AND OBJECTIVES: A rapidly increasing human population has resulted in the expansion of urban areas and an associated increase in the demand for food. Consequently, urban and peri-urban agriculture, using waste water as a source for irrigation, is increasingly common around the world, particularly in developing countries. In the Kurdistan region of Iraq, the soils within Agriculture areas have the potential to accumulate trace elements originating from various sources of contamination like municipal waste disposal and the use of wastewater for irrigation. The main aim of this study was to assess the levels and sources of trace elements in this specific region and to analyze the potential health hazards linked to toxic elements present in the soil. METHODS: Elemental analyses were conducted on soil samples using the total digestion method, involving the use of Hydrofluoric acid. Subsequently, 118 soil samples, each with a fraction size of less than 2 millimeters, were analyzed. These samples were collected from seven different urban and peri-urban agriculture areas in Sulaimani province. The analysis was carried out using Inductively coupled plasma mass spectrophotometry, which operated in collision cell mode with 7 percent hydrogen in helium to minimize polyatomic interferences. FINDINGS: The study findings indicated that the soils, with a potential hydrogen range of 7.5 to 8.18, are mainly calcareous and have textures that vary from silty loam to sandy or silty clay. Additionally, the organic matter content of these soils ranges from 1.4 percent to 5.47 percent. It was noted that soils subjected to wastewater irrigation do not show significant contamination by trace elements, whereas those affected by waste disposal sites showed high levels of chromium (134 milligrams per kilogram), copper (263 milligrams per kilogram), zinc (773 milligrams per kilogram), cadmium (4.19 milligrams per kilogram) and lead (161 milligrams per kilogram). Evaluation of enrichment factors indicates that the concentrations of trace elements generally remain within the anticipated background levels, with the exception of the municipal waste disposal site. The hazard indices derived for the trace elements indicate that the potential health risks associated with exposure routes are minimal. These indices consistently remain below the internationally recognized threshold of one, which signifies that the health concerns are insignificant fall within acceptable boundaries. CONCLUSION: The concentrations of trace elements exhibited a notable increase in locations allocated for waste disposal, demonstrating a gradual decline in comparison to other agricultural regions. Throughout all the locations examined, the levels of nickel consistently remained elevated, suggesting that the geological attributes of the region have a significant impact. [ABSTRACT FROM AUTHOR]

BACKGROUND AND OBJECTIVES: Trichoderma species (Trichoderma sp.) is commonly found in nature, particularly in soil and roots, often thriving in plants rich in cellulose such as oil palm. Therefore, this study aimed to characterize Trichoderma sp. in each substrate as well as to assess cellulolytic and ligninolytic potential in vitro using a specific medium. Characterization and utilization of the plant were examined to efficiently manage empty fruit bunch (EFB) waste in Indonesian oil palm plantations. By exploring the biological, ecological, and biochemical attributes of Trichoderma sp., this study examined the mechanisms associated with efficacy in bioconversion processes and waste remediation. METHODS: A survey method was used to determine sampling locations, and purposive sampling was utilized in the field. Furthermore, several stages were undertaken including isolation, identification, as well as testing of morphology and potential in vitro. FINDINGS: The results showed that the growth characteristics of Trichoderma sp. in filling a petri dish spanned approximately five days, forming colonies with a dark green hue. Microscopically, the isolates consisted of conidiophores, phialides, and conidia. Meanwhile, in vitro potential was assessed through cellulolytic and lignocellulolytic assays, with each isolate demonstrating varying capabilities in breaking down cellulose and lignocellulose. The highest cellulase activity (3.55 units per gram) was observed in enzyme starter granules treated with air drying. The highest viability per gram was found in spore inoculum (17.0 x 107) with air drying treatment. The greatest reduction in weight of oil palm EFB waste (65.3 percent) was achieved through the application of Trichoderma sp. enzyme starter granules with air drying treatment. Furthermore, eight isolates demonstrated cellulolytic and ligninolytic potential. Isolates sourced from soil had rapid growth on starter and baglog mediums, indicating potential for subsequent field applications as a biodegradation agent for organic waste. CONCLUSION: Based on the macroscopic (shape and color of mycelium) and microscopic characteristics (mycelium form), a total of eight Trichoderma sp. isolates were obtained. During the potential test, it was observed each isolate had different cellulolytic and ligninolytic activities. This study provided valuable insights into the diversity and enzymatic potential of Trichoderma sp. fungi, underscoring the importance of selecting suitable strains and optimizing cultivation conditions for various biotechnological applications. By exploring cellulolytic and ligninolytic capabilities, the results contributed to the development of more efficient and sustainable strategies for organic waste management and bioconversion. In general, this study represented a significant milestone in the quest for sustainable waste management solutions in agriculture, offering a promising pathway towards mitigating environmental impact and promoting the long-term sustainability of oil palm cultivation. [ABSTRACT FROM AUTHOR]

In this study, eggshells were upgraded to two active adsorbents, iron (Fe)-magnesium (Mg) particles and hydroxyapatite (HAP), and their subsequent utilization for the elimination of tetracycline (TET) and metronidazole (MNZ) from aqueous systems was explored. As a first step, the strength of the functionalization solution (0.5 M) and synthesis temperature (600°C) were optimized for the improved performance of the Fe-Mg particles. Through batch experiments, the maximum TET and MNZ adsorption capacities (qm) were estimated as 9.47 and 6.29 mg/g, respectively, for the Fe-Mg particles. In the case of HAP, the qm were 8.70 and 6.07 mg/g for TET and MNZ, respectively. Monolayer and chemisorption phenomena were identified as the mechanisms for TET's removal with both Fe-Mg particles and HAP. By contrast, monolayer and physisorption were responsible for MNZ's removal with both adsorbents. In a binary system, i.e., in the presence of both TET and MNZ, the antagonistic effect was observed, which hindered the efficient removal of one by the other. The van der Waals force was involved in MNZ adsorption, whereas the interaction between the hydrogen (H) atoms of the phenolic diketone group(s) of TET and the anions of Fe-Mg particles/HAP favored TET's removal. In the recyclability study, both adsorbents performed well for the first 20 cycles, but thereafter the removal efficiency reduced drastically. Overall, eggshell waste can be managed effectively by converting it into adsorbents, which can be a viable alternative for adsorption-based water/wastewater treatment. Practical Applications: The release of emerging contaminants from conventional wastewater treatment plants has been a major environmental concern in recent years. Consequently, these contaminants find their way into environmental matrices, affecting organisms at various scales by disrupting their metabolic activities. Advanced treatment techniques like ozonation, sonocatalysis, photocatalysis, adsorption, electrochemical oxidation, and Fenton processes are effective in the removal of emerging contaminants. Specifically, the current focus is on adsorption, which is scalable and cost-effective. Moreover, the use of naturally derived adsorbents promotes sustainability of the process. However, the applicability of these adsorbents varies depending on their availability and ease of synthesis. In this context, eggshells from confectionary and poultry processing industries can be a suitable alternative for synthesizing naturally derived adsorbents. This study successfully evaluated eggshell-based adsorbent synthesized utilizing the holistic components of eggshells (Fe-Mg particles derived from the inner parietal membrane and hydroxyapatite synthesized from the hard calcareous shell) for the removal of commonly used pharmaceutical compounds (i.e., tetracycline and metronidazole as single and binary systems). The possible removal mechanism, recyclability, and cost calculations are presented and the major gap of competitive adsorption mimicking real-time wastewater was also explored. [ABSTRACT FROM AUTHOR]

Hospital waste has the potential to affect human health, the environment, communities, animals, and even individuals at home in both infectious and noninfectious ways. That is why efficient and sustainable hospital waste management and disposal are the only keys to reducing waste-related risks. Financially and environmentally viable hospital waste management and disposal activities are the dire need of the present time. The present study aims to identify the factors that should be incorporated when designing any hospital waste management strategy and to find the appropriate technology for hospital waste disposal in Quetta City, Pakistan, by using social, health, technological, economic, financial, institutional, and environmental factors, known collectively as the SHTEFIE criteria. Findings reveal that environmental, technological, and financial factors are dominant over all other factors. Incineration is the best technique among all other waste disposal techniques, but environmental protections must be strictly followed. Landfill is a financially sound technique and suitable for noninfectious and general waste, whereas autoclaving and microwaving are best used as waste treatment methods. [ABSTRACT FROM AUTHOR]

Solid waste management is a burning issue that requires special attention and consideration in developing countries. In most cities and towns, it has become a public health concern due to uncontrolled dumping that has caused degradation of the natural environment. Therefore, the present study assessed the impact of dump yards on the surrounding environment by conducting physicochemical and biological analysis of groundwater and leachate samples and comparing it with control sites located at Silchar town of Assam, India. The result demonstrated that a large number of organic materials and inorganic salt leached to the surrounding environment by the decomposition of waste at open dumping site which significantly pollutes the groundwater sources of nearby areas. The sample site S5 recorded the highest value of WQI (100.78). Contamination of Total Coliform and E. Coli bacteria were recorded in the range of 96–2116 CFU/100 ml and 0–2466 CFU/100 ml respectively in sample sites. However, in control sites, coliform bacteria were found in the range of 8–43 CFU/100 ml and E. coli bacteria was found to be absent in all the control sites. The mean concentrations of Pb (8.94 mg L−1), Mn (19.12 mg L−1) and Ni (6.38 mg L−1) in the dump yards were found above the maximum permissible limit of EPA US, 1986; however, the concentrations of Cu (4.05 mg L−1) and Cd (0.45 mg L−1) were within the permissible limit. Hence, there is a need for proper scientific planning and management of waste disposal for the protection of our surrounding environment. [ABSTRACT FROM AUTHOR]

Biomedical waste (BMW), including hospital wastewater (HWW), poses significant risks to the environment, workplace health and safety, as well as public health. Therefore, the selection of treatment technologies for BMW should be chosen in that way so that the negative impact of BMW and HWW can be neutralized. Considering this, the current review focuses on emerging green technologies for BMW and laboratory wastewater treatment and management. Improper waste management practices in developing nations have given rise to several issues, such as the introduction of pharmaceutical residues that are released into the environment. Hence, the timely adaptation and application of environmentally friendly technologies in the health sector is crucial. This study compares various technologies such as incineration, autoclaving, plasma pyrolysis, chemical disinfection, and microwave treatment, in terms of their feasibility, operational costs, and efficiency for the treatment of solid BMW. The study suggested selecting BMW treatment technology as per the Best Available Technology (BAT) principles of autoclave and microwave. Further, the liquid BMW is also a threat to the environment and human health. Ozonation technology has shown a promising ability for the pretreatment of laboratory and hospital wastewater. [ABSTRACT FROM AUTHOR]

Landfill is considered as a primary method for disposing of municipal solid waste in numerous countries. This practice carries a significant risk of generating substantial quantities of leachate with harmful and dangerous substances that have negative impacts on both ecosystems and human populations. Therefore, proper treatment is required for the leachates prior to being discharge to the environment. Researchers have applied several techniques for leachate degradation, with varying levels of efficiency, considering leachate characteristics, discharge requirements, technical feasibility, regulations, and financial aspects. However, the conventional treatment processes are not effective in treating landfill leachate due to the high operational expenses involved and the presence of resistant substances in the leachate. Thus, the requirement of an effective and low-cost treatment technique has been arisen. Studies have shown that the use of recycled or waste materials, locally and readily available materials as biofilters in anaerobic bioreactors could be a practical low-cost approach for leachate treatment and promising results have been obtained in removing COD, BOD, nitrogenous compounds, and heavy metals. This article presents that the anaerobic filter reactor technology offers several advantages for landfill leachate treatment. It provides high removal efficiencies for organic pollutants, achieving removal rates of up to 90%. Additionally, the process generates biogas, which can be utilized as a renewable energy source, further enhancing the sustainability of the treatment system. [ABSTRACT FROM AUTHOR]

Plastic waste is an underutilized resource that has the potential to be transformed into value-added materials. However, its chemical diversity leads to cost-intensive sorting techniques, limiting recycling and upcycling opportunities. Herein, we report an open-loop recycling method to produce graded feedstock from mixed polyolefins waste, which makes up 60% of total plastic waste. The method uses heat flow scanning to quantify the composition of plastic waste and resolves its compatibility through controlled dissolution. The resulting feedstock is then used to synthesize blended pellets, porous sorbents, and superhydrophobic coatings via thermally induced phase separation and spin-casting. The hybrid approach broadens the opportunities for reusing plastic waste, which is a step towards creating a more circular economy and better waste management practices. [ABSTRACT FROM AUTHOR]

The transition from linear economy to circular economy (CE), which can reduce natural resource depletion and minimize waste generation, has become a worldwide trend. The current challenge for Vietnam is to identify the key areas for the transition, given that financial resources are limited and that a detailed and comprehensive accounting of waste generation and collection for decision-making is lacking. This study aims at filling the gap by analyzing the waste flows throughout the supply chains and identifying the key areas for the CE transition in Vietnam. The 2018 updated IO table is used as an econometric tool to identify direct and indirect waste collection intensity for all types of waste. The result shows that in terms of waste intensity, among primary sectors, Coke and the group of Mining and Extraction industries (S4-S7) have significant room for reducing waste. In terms of IO interaction, collection rate and recyclable potential of waste, among secondary sectors, Paper production and services (S11), Plastics (S16), and Building materials (S17) should be prioritized for the CE transition in Vietnam. Having a long supply chain and meeting all priority criteria, Plastics is identified as one of the key industries to be selected to exemplify managerial implications to show which solutions/innovations should be proposed in each circular economy period to improve sustainable efficiency. [ABSTRACT FROM AUTHOR]

In the case of building demolition, the construction industry increasingly prioritizes sustainable waste management and environmental protection. Life cycle assessment (LCA) was used to assess two scenarios to evaluate the environmental impacts of four methods (demolition, transport, recycling, and landfills). To conduct an Attributional LCA, the SimaPro software suite and Ecoinvent v.3 Life Cycle Inventory database were applied. LCA showed that construction and demolition (CDW) management has major environmental effects on global warming, fine particulate matter formation, human carcinogenic toxicity, and human non-carcinogenic toxicity. The results indicate the beneficial environmental impact of two waste management scenarios. The extent to which recycling waste from building demolition can benefit the environment is dependent on the type of material being recycled. Copper recycling can reduce the building industry's environmental impact. Human non-carcinogenic toxicity is the most important and beneficial factor. Previous research has largely neglected this stage. The findings indicated that environmental conditions have a significance impact and, accordingly, the optimal scenario. This study provides stakeholders with a road map for making informed decisions regarding the application of CDW management. It suggests that LCA studies should take multiple indicators into account, and sensitivity and uncertainty analyses were performed to evaluate the accuracy of the results. [ABSTRACT FROM AUTHOR]

Urban waste management should ensure minimal environmental impact and local context adaptation. We present an assessment of the municipal Recycling Centre in Buenos Aires City (Centre), which processes recyclable materials, food waste, municipal tree pruning, and construction and demolition waste. To evaluate the Centre's socio-environmental performance, we conducted a study in an area of ~ 9 km2 around the Centre. First, we surveyed nearby residents to gather their perceptions of the Centre and neighbourhood cleanliness. Second, we analysed indicators of air quality by dust traps, street cleanliness by applying an index evaluating street littering and provision of municipal waste containers, and vehicular and pedestrian traffic at the entrance of the Centre. About 80% of local residents had a negative perception of street cleanliness, largely due to litter scattered by neighbours around waste containers and pavements. Among residents aware of the Centre's existence, 60% reported negative perceptions, linked with dust emissions and heavy truck traffic. Positive perceptions were linked to the awareness about the Centre's role in waste recycling and employment. Air quality revealed the highest levels of dust particles near the Centre and on avenues, irrespective of their distance from the Centre. The cleanliness index was lowest in the Centre's immediate vicinity. Intense truck traffic was documented at the Centre's entrance, also reported as a negative issue in the surveys. These findings highlight negative environmental impacts on the well-being of residents in the Centre's surroundings, some of them associated with the Centre's operations. The study identifies opportunities for significant improvement to address these issues. [ABSTRACT FROM AUTHOR]

Abstract\nPoints of interestThis study was conducted in three low-income areas of Harare Metropolitan Province in Zimbabwe to understand how women with disabilities accessed water, sanitation, and hygiene (WASH) facilities during COVID-19. Qualitative data were collected through structured interviews and focus group discussions involving 104 purposively sampled women with disabilities. Key informant interviews were held with seven representatives of organisations working with persons with disabilities in Harare. Findings indicated that overt discrimination against women with disabilities increased as households struggled to access WASH facilities. These women risked gender harassment from community boreholes ‘marshals’, and urogenital infections resulting from unhygienic menstruation management practices. Poor waste disposal and water reticulation systems restricted high water, sanitation and hygiene standards required to fight the pandemic. The study recommends the full implementation of the national disability policy and the constitutional provisions to safeguard the rights of women with disabilities in times of crises.Women with disabilities generally face multiple barriers to accessing water, sanitation and hygiene. The COVID-19 pandemic exacerbated these barriers making it quite arduous for them to access water, sanitation and hygiene.The national response to the COVID-19 pandemic was formulated without women with disabilities in mind, and therefore, their unique needs were largely ignored rendering it difficult for them to cope with the challenges posed by the pandemic.It is recommended that deliberate measures be created in consultation and with the full participation of women with disabilities and their organisations, to ensure inclusive water, sanitation and hygiene measures and guarantee the rights of women with disabilities.While the National Disability Policy articulates the need to ensure that persons with disabilities have equitable access to clean water, sanitation and hygiene and that water points are accessible and closer to where persons with disabilities live, this call is not being fully implemented.Some water points are inaccessible, the design of community boreholes is insensitive to the needs of persons with disabilities and community members do not exercise reasonable accommodation to persons with disabilities who stand in long queues for hours.Instead of reasonable accommodation, women with disabilities were exposed to verbal abuse, harassment, requests for bribes and sometimes ‘sex for water’ transactions at community boreholes.Women with disabilities generally face multiple barriers to accessing water, sanitation and hygiene. The COVID-19 pandemic exacerbated these barriers making it quite arduous for them to access water, sanitation and hygiene.The national response to the COVID-19 pandemic was formulated without women with disabilities in mind, and therefore, their unique needs were largely ignored rendering it difficult for them to cope with the challenges posed by the pandemic.It is recommended that deliberate measures be created in consultation and with the full participation of women with disabilities and their organisations, to ensure inclusive water, sanitation and hygiene measures and guarantee the rights of women with disabilities.While the National Disability Policy articulates the need to ensure that persons with disabilities have equitable access to clean water, sanitation and hygiene and that water points are accessible and closer to where persons with disabilities live, this call is not being fully implemented.Some water points are inaccessible, the design of community boreholes is insensitive to the needs of persons with disabilities and community members do not exercise reasonable accommodation to persons with disabilities who stand in long queues for hours.Instead of reasonable accommodation, women with disabilities were exposed to verbal abuse, harassment, requests for bribes and sometimes ‘sex for water’ transactions at community boreholes. [ABSTRACT FROM AUTHOR]

Background: In May 2019, Ghana piloted the introduction of RTS,S malaria vaccine into routine immunization in 42 districts of seven of the 16 regions. The RTS,S malaria vaccine implementation programme (MVIP) post-introduction evaluation (PIE) conducted in Ghana, assessed the immunization system as well as healthcare worker and caregiver experiences during the phase-one rollout but was less expressive on quantitative grading of the respective thematic areas of the vaccine introduction plan. Given the utility of summary statistics in programme evaluation and communication, this follow-up study aimed to provide an overall rating of the country's performance regarding the MVIP. Methods: A retrospective study was conducted from 10th January to 5th February 2024. It involved review of records to assess key thematic areas of the national MVIP plan, using a study tool adapted from the WHO New Vaccine Introduction (NVI) checklist. A composite score ranging from zero to 100 per cent was generated to assess the country's overall performance regarding introduction of the malaria vaccine, rated on a Likert scale as comprehensive, good, fair, and poor. Results: The overall performance in the MVIP was rated 78.9% (30/38) corresponding to a grading of "good" on the Likert scale. Performance indicators under thematic areas including policy, national coordination mechanisms, waste management, health worker training, and pharmacovigilance were completely achieved. However, some weaknesses were exhibited in areas such as financial consideration, cold chain, logistics, and vaccine management, and monitoring and evaluation. Conclusion: Ghana's MVIP demonstrated remarkable strengths worth leveraging to improve the national immunization programme. The weaknesses observed in some of the thematic areas present opportunities to engage key immunization partners and stakeholders towards aligning efforts to ensure a more robust expansion phase. The lessons from the MVIP may be relevant to areas introducing malaria vaccine irrespective of the product type—RTS,S or R21. [ABSTRACT FROM AUTHOR]

Background: The healthcare sector has a negative ecological impact, and intensive care is one of the most resource-consuming areas. Nurses have a duty to contribute to climate change reduction, design climate-resilient healthcare systems, and support individuals and communities in adapting to the effects of the planetary health crisis. It is essential to incorporate environmental sustainability into nursing education so that nurses can advocate for conscientious and ethically sustainable healthcare that benefits both patients and the planet. This study aimed to explore postgraduate intensive care nursing student experiences of environmental sustainability in clinical practice at intensive care units. Methods: Data were collected using a qualitative questionnaire, and the data were analysed using inductive thematic analysis. The participants were 24 registered nurses studying postgraduate, specialist intensive care nursing courses at four universities in the south and west regions of Sweden. Results: The results describe critical care students' environmental sustainability experiences in one overarching theme with five subthemes. Intensive care is a challenging context in terms of sustainability, where saving lives is the number one priority. There were good and bad sustainability habits among the staff, and awareness was key to improving. Clinical supplies come in unsustainable packages, and the participants wished for better alternatives and they wanted more knowledge and education on sustainable practices. The findings also emphasized the importance of a holistic perspective throughout each patient's pathway. Conclusions: Sustainability in intensive care units is somewhat unrecognised today, although intensive care nurses want that to change. The context where saving lives is prioritized makes implementing ecologically responsible practices a challenge. However, environmental sustainability in intensive care is feasible, with education needed for nurses to take on the responsibility of making improvements. Hospital management prioritizing sustainability is also important to support clinicians in implementing sustainable practices in intensive care units. [ABSTRACT FROM AUTHOR]

Syngas (CO + H 2) production through biomass gasification offers a promising and sustainable alternative to conventional fuels. This study investigates the co-gasification of palm oil decanter cake (PODC) and Alum Sludge (AS), utilizing response surface methodology (RSM) and artificial neural network (ANN) techniques to optimize and predict syngas production. Conducted in a fixed bed horizontal reactor, the experiment investigates temperature, airflow rate, and particle size as input parameters. Results revealed that optimal condition of 900 °C temperature, 10 mL/min airflow rate, and 2 mm particle size yielded the highest syngas production at 39.48 vol%. The RSM showed an R2 value of 0.9896, whereas ANN network revealed an overall R2 value of 0.971. Both models demonstrated strong alignment with experimental data and the modelled equation. This research demonstrates the effective use of statistical modelling to enhance the efficiency and effectiveness of syngas production, thereby fostering advancements in sustainable energy production. [Display omitted] • PODC and AS co-gasification was carried out in fixed bed horizontal tube furnace reactor. • RSM and ANN were applied for optimization and prediction of syngas production. • At optimal condition of 900 °C, 10 mL/min, and 2 mm, 39.48 vol% syngas was produced. • RSM and ANN model prediction accuracy were 98.96% and 97.1%, respectively. • Both RSM and ANN satisfactory validate and predict the response. [ABSTRACT FROM AUTHOR]

The accumulation of waste has a profound impact on the environment, prompting a crucial discussion about effective waste management strategies aligned with Oman Vision 2040's sustainability goals. The consequences of municipal solid waste generation have multifaceted impacts on the environment, public health, and overall well-being of communities. Addressing these consequences requires a holistic approach that includes the integration of sustainable waste management technologies to foster a circular economy. This paper emphasizes the necessity for a paradigm shift in waste management methodologies, emphasizing the importance of Hyperspectral Imaging and Big Data Analytics into municipal solid waste management processes. This paper explores the synergistic relationship between hyperspectral imaging which is capable of precise material identification, and big data analytics to facilitate comprehensive data analysis. The integration aims to optimize waste segregation, resource recovery, and recycling processes. The utilization of data-driven insights enables predictive modeling and the identification of trends thereby facilitating more efficient and sustainable waste management practices. The harnessing of big data analytics empowers stakeholders to make informed decisions in waste management to achieve long-term environmental, and economic sustainability. [ABSTRACT FROM AUTHOR]

In this paper, we propose an innovative method for determining the fill level of containers, such as trash cans, addressing a critical aspect of waste management. The method combines spatial impulse response analysis with machine learning (ML) techniques, offering a unique and effective approach for sound-based classification that can be extended to various domains beyond waste management. By employing a buzzer-generated sine sweep signal, we create a distinctive signature specific to the fill level of the waste container. This signature, once accurately decoded, is then interpreted by a specially developed ensemble learning algorithm. Our approach achieves a classification accuracy of over 90% when implemented locally on a development board, optimizing operational efficiencies and eliminating the need to delegate complex classification tasks to external entities. Using low-cost and energy-efficient hardware components, our method offers a cost-effective approach that contributes to sustainable and efficient waste management practices, providing a reliable and locally deployable solution. [ABSTRACT FROM AUTHOR]

Carbon peaking and achieving carbon neutrality have emerged as pivotal strategic imperatives in China. These objectives not only drive a shift in production, lifestyle, and consumption patterns but also illuminate a path towards a comprehensive green metamorphosis in China's economic and social development landscape. The distinctive nature of museums as quintessential public edifices, requiring sustained regulation of temperature and humidity alongside attracting substantial foot traffic, positions them as crucial pioneers in the pursuit of carbon peaking and neutrality. It is essential for museums to leverage their leadership and advocacy roles to catalyze low-carbon construction practices across society. This study delves into the energy dynamics specific to the museum sector, delving into the recycling of exhibition materials, methodologies for carbon footprint assessments of visitors and museum staff, and the establishment of a standardized carbon emission accounting framework tailored to the museum industry. Through meticulous examination of representative cases and subsequent analysis, this research delineates decarbonization strategies, offering indispensable technical scaffolding for carbon assessment and emission reduction efforts within the museum realm. [ABSTRACT FROM AUTHOR]

AbstractThe convective drying of spherical biosolids particles from two wastewater treatment plants (Type 1: anaerobic/anoxic treatment with belt filter press dewatering; Type 2: aerobic/anoxic treatment with centrifuge dewatering) was studied under 10 conditions across 44 trials. A wide spectrum of conditions including three drying temperatures (88, 109, and 138°C), two gas velocities (1.6 and 2 m s−1), and particle sizes of 2 cm and 4 cm were investigated. Measured variables included particle mass, center/internal temperature, surface temperature, shrinkage, and qualitative observations of morphological changes. Most samples showed two drying periods, a constant rate period followed by a falling rate period. Additionally, it was found that drying rates and morphological changes depended significantly on particle size and drying intensity (i.e., drying gas temperature and gas velocity) with higher intensities resulting in larger, more porous particles. Internal temperature profiles displayed a consistent pattern, an initial heating phase where internal temperatures quickly rose to approximately the wet bulb temperature of the drying gas, a quasi-constant temperature phase at that temperature, and a final sharp increase/spike to reach equilibrium with the drying gas temperature. Moreover, IR images showed that sub-surface temperatures (between the core and surface) were significantly lower than surface temperatures. Surface temperatures showed a more linear increase throughout drying until equilibrium with the drying gas temperature. The consistent temperature difference between the center and surface, as well as the internal temperature profile, suggests the existence of a drying front, moving radially inward as the particle dries. This research contributes to a better understanding of biosolids drying dynamics, offering insights to improve thermal treatment strategies thereby contributing to the broader field of waste management. [ABSTRACT FROM AUTHOR]

BACKGROUND RESULTS CONCLUSION Global food loss and waste have raised environmental concerns regarding the generation of greenhouse gases (e.g., carbon dioxide and methane gas), which directly contribute to climate change. To address these concerns, the present research aims to upcycle food waste into an alternative culture medium for the cultivation of microalgae. Various parameters including pretreatment of food waste (i.e., autoclave and non‐autoclave), concentration of food waste culture medium (i.e., 10%, 30%, 50%, 70%, 90% and 100%), harvesting efficiency and biochemical compounds of Chlorella sp. microalgae were carried out.Based on the preliminary findings, the highest biomass concentration obtained from 10% food waste culture medium in the autoclave for Chlorella sp., including strains FSP‐E, ESP‐31 and CY‐1, were 2.869 ± 0.022, 2.385 ± 0.018 and 0.985 ± 0.0026 g L−1, respectively. Since Chlorella vulgaris FSP‐E exhibited the highest biomass concentration, this microalgal strain was selected to examine the subsequent parameters. Cultivation of C. vulgaris FSP‐E in 100FW achieves a biomass concentration of 4.465 ± 0.008 g L−1 with biochemical compounds of 6.94 ± 1.396, 248.24 ± 0.976 and 406.23 ± 0.593 mg g−1 for lipids, carbohydrates and proteins, respectively.This study shows that using food waste as an alternative culture medium for C. vulgaris FSP‐E can achieve substantial biomass productivity and biochemical content. This research work would contribute to the concept of net zero emission and transitioning toward a circular bioeconomy by upcycling food waste as an alternative culture medium for the cultivation of microalgae. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Concentrated animal feeding operations (CAFOs) have led to environmental challenges, specifically waste management. Swine CAFOs generate large amounts of waste, requiring proper treatment to avoid air and water pollution. Conventional waste management technologies, such as lagoon and spray field systems, do not prevent air and water pollution impacts. Research for the past few decades led to recommendations for waste treatment technologies superior to lagoons and spray fields. Private environmental sustainability initiatives focused on reducing greenhouse gas emissions in the food supply chain have implemented biogas digester projects for capturing methane in covered swine lagoons to reduce greenhouse gas emissions. However, research indicates that methane capture alone does not solve the broader pollution issues associated with lagoon and spray field systems still in use at these CAFOs to dispose of digested effluents. The Environmentally Superior Technologies (EST) initiative in North Carolina set public standards to eliminate waste discharge, reduce atmospheric emissions, and control odors and pathogens. Research has confirmed that technologies coupling solids separation with water treatments to remove volatile organic carbon, pathogens, and reactive forms of nitrogen can meet EST standards. A designated EST--the Super Soil System--substantially reduced odor by 99.9%; pathogens by 99.99%, nutrients (phosphorus and nitrogen) by >90%, and heavy metals (cooper and zinc) by 99%. The ammonia emissions were reduced by 94.4% for the warm and 99.0% for the cool season with respect to a conventional lagoon system. Corresponding greenhouse gas emission reductions were 96.7%. Components of designated EST can be applied to retrofit covered lagoons and anaerobic digestion systems with significant environmental benefits. Recommendations are proposed, based on the collective experience with EST and current trends in animal production concentration, for environmentally safe technologies to handle excess manure produced in the USA. [ABSTRACT FROM AUTHOR]

AbstractAlthough many chefs have developed the habit to practice food waste management in the kitchen, so-called environmental habitus, little is known about how this habitual practice has formed and how/if it has evolved with time. This study combines practice theory and theory of habit formation to explore the (f)actors that have influenced the formation and evolvement of environmental habitus among chefs. Interpretive phenomenological analysis is used to examine the lived experiences of 18 senior chefs in Indonesia who have habitually engaged in food waste management. The study establishes the critical role of mothers in shaping personal outlook of chefs on the importance of food waste reduction. Senior chefs are key for reinforcing this outlook, but also for providing necessary competencies and tools for resourceful cooking. The study highlights family upbringing and on-the-job training as the critical (f)actors in the formation and evolvement of the habitual practice of food waste management among future chefs. [ABSTRACT FROM AUTHOR]

The remarkable miniaturization of Internet of Things (IoT)-based systems and the rise of distributed intelligence are promising research paradigms in the design of smart cities. IoT and distributed intelligence are conjoined. On the one hand, IoT provides a digital connection to everyday physical devices, and on the other hand, distributed intelligence allows these connected devices to work together in a distributed environment to solve complex problems through learning and reasoning. In this article, we investigate and report the recent premier advances in distributed intelligence for IoT-based smart cities. We use bibliometric techniques which provide essential insights into many studies to evaluate the literature including publication year, type, and citation status on distributed intelligence and its variations published between 2013 and 2023. We categorize and classify literature by devising a taxonomy based on essential parameters, technologies, approaches, applications, and implications with respect to distributed intelligence. Moreover, we provide recent ongoing advancements in distributed intelligence and IoT such as sustainability, blockchain, 5G technologies, AI, edge computing expansion and IoT expansion. We also highlight some of the use cases which include traffic management, energy management, waste management, public safety, and healthcare. We provide core layers and services for implementing distributed intelligence in IoT-based smart cities and present several research challenges and issues. [ABSTRACT FROM AUTHOR]

The cost estimation and assessment of healthcare waste treatment systems (HCWTSs) for preventing financial and environmental damage are essential. This work reports economic analyses of treatment of hazardous–infectious waste based on WHO approach in HCWTSS of 43 hospitals in Tehran, Iran. The waste generation rate for total hospital waste in 43 HCWTSS was 4.42 ± 2.77 kg/active-bed/day. The mean of chemical, sharps, infectious, and general wastes in 43 HCWTSS were 13.79 ± 19.71, 30.29 ± 37.46, 336.28 ± 291.31, and 539.6 ± 383.13 kg/day, respectively. Economic analyses proved that general hospitals spent 1.63 times more than specialized hospitals on treating hazardous–infectious waste per year. The annual cost of treating each kilogram of hazardous healthcare waste in studied HCWTSS was 0.3 dollars. A range of total annual costs in 43 HCWTSS was limited to 7.9–118 thousand dollars. The results of ANOVA test demonstrated that the age and performance levels of hospitals significantly affect the annual capital and operating costs, respectively. Hence, improving recycling knowledge and increasing source-separated recycling should be considered to control the costs in HCWTSS. The results of this work have implications for the hospital managers in especially developing countries to evaluate previously unknown economic analyses and policies and take action to control wasted costs in HCWTSS. [ABSTRACT FROM AUTHOR]

Cow dung is an abundant agricultural by‐product that poses disposal challenges. Converting this waste into a valuable energy resource aligns with sustainable waste management practices and contributes to a circular economy. This research aims at Cow dung disposal by carbonization and gasification for hydrogen generation and maximizes it by optimizing the process parameters. In the pyrolysis‐carbonization process, the influence of temperature on cow dung and its biochar characteristics was initially investigated. On the cow dung feedstock, different operating temperatures at about 400, 500, and 600 °C and response times of about 30, 60, and 120 min were tested. With CD450 as the feedstock, the gas concentrations and hydrogen yield were around 62 vol% and 0.69 m3 kg−1, respectively, for longer reaction times. Similar to this, the gas concentration and yield value for hydrogen at 600 °C gasification temperature is around 64 vol% and 0.91 m3 kg−1. Cow dung is evidently acceptable for larger hydrogen production at higher gasification temperatures and reaction times when the carbonization temperature is 450 °C. In addition, when compared to feedstock without adding nanoparticles, including Fe3O4 nanoparticles may increase the hydrogen concentration and yield by around 13.5 % and 4.21 %, respectively. [ABSTRACT FROM AUTHOR]

Waste is the materials left over after the processing of ores. Significant disasters involving waste disposal structures have occurred in Brazil in recent years and caused severe damage by contaminating soil, rivers and coastal areas, destroying native fauna and flora, interrupting the water supply and compromising its potability, putting the population's health, livelihoods and economy at risk, as well as causing 289 irreparable human deaths. Regulatory laws have become stricter, and since 2019, after the tailings dam tragedies occurred in 2015 and 2019 in Mariana and Brumadinho, in Minas Gerais, the operation of upstream-raised tailings dams has been prohibited in Brazil. In 2022, a waste slide from a sterile pile at the Pau Branco Mine in Nova Lima promoted a dike overflow. There was the death of five people whose car was buried by a landslide on a hillside. New strategies and technologies, such as reprocessing and recycling, can be tested to ascertain whether they can help improve practices in tailings management. Indeed, mining companies' corporate responsibility and sustainability practices need to be evaluated to verify whether they better match expectations. On the other hand, more specific and detailed regulations and resolutions are required to ensure the safe monitoring and management of sterile waste piles. This paper presents a review of the facts, a discussion of the literature (mainly on recent tailings dam disasters), the current situation of mining-containing waste structures in Brazil, a brief sustainability analysis and perspectives aimed at preventing/minimising catastrophes in the future. [ABSTRACT FROM AUTHOR]

Dewatered sludge (DS) is a sewage sludge with a unique property due to extracellular polymeric substances (EPSs) and polymer flocculants. These components form a stable 3D polymer network to increase dewatering efficiency, leaving behind valuable materials such as lipids. This article explored the influences of DS particle size on lipid yield and the effects of extraction on the chemical, morphological, and thermal properties of the residual dewatered sludge (RDS). Lipid yields with unimodal distribution were observed across the particle size ranges (<0.5, 0.5–1.0, 1.0–2.0, 2.0–4.0, and 4.0 mm). The highest lipid yield of 1.95% was extracted from 1.0–2.0 mm after 4 h at 70 °C and 0.1 g/mL sludge-to-solvent ratio. Efficiency was influenced by the DS's morphology, facilitating solvent infiltration and pore diffusion. The extraction process reduced water and organic fractions, resulting in higher thermal stability. Bibliometric analysis of "extraction*" and "sewage sludge" shows increasing research interest from 1973 to 2024. Five research clusters were observed: heavy metal speciation and stabilization, sludge and its bioavailability, extraction techniques and resource recovery, contaminants remediation, as well as phosphorus recovery and agricultural applications. These clusters highlight the diverse approaches to researching DS and RDS while promoting sustainable waste management. [ABSTRACT FROM AUTHOR]

Due to industrial growth and its impact on the environment, the increasing amount of industrial waste requires a comprehensive approach aligned with the principles of sustainable development. The main goals are not only to preserve natural resources but also to encourage innovation in the reuse of waste materials. In an attempt to reduce the problems regarding waste disposal and wastewater treatment in the textile industry, fibrous textile waste was used as a starting material to obtain carbon adsorbents for the removal of pollutants from wastewater. Waste cotton and mixed yarns, mainly consisting of polysaccharide cellulose, were hydrothermally carbonized and activated with KOH to convert them into efficient carbon adsorbents for heavy metal removal from water. Characterization of carbonized material showed that after activation, an increase in specific surface area (up to 872 m2/g) and content of surface oxygen groups (6.04 mmol/g) leads to a higher affinity towards heavy metal ions, especially lead ions, and high adsorption capacity of 19.98 mg/g obtained for activated cotton yarns. The results of this research represent a contribution to the reduction of waste materials by modifying them into adsorbents, while the regeneration of adsorbents is an example of the practical application of polysaccharide-based materials in the purification of wastewater containing various heavy metal ions. [ABSTRACT FROM AUTHOR]

This review examines the potential of municipal solid waste (MSW) as a renewable energy source, focusing on recent advances in thermochemical conversion technologies and their environmental impacts. The exponential growth of urban populations has led to a surge in MSW, necessitating sustainable waste management solutions. Traditional disposal methods, such as landfilling and incineration, have significant environmental drawbacks. However, advancements in waste-to-energy (WtE) technologies, including incineration, pyrolysis, and gasification, offer promising alternatives for energy recovery and resource utilization. This review explores the composition of MSW, its classification as a renewable resource, and the thermochemical conversion technologies that transform waste into energy. The environmental impacts of these technologies, particularly emissions and air quality concerns, are critically analyzed. The review highlights the evolving regulatory landscape and the implementation of advanced emission reduction systems. The findings underscore the importance of integrating innovative waste management strategies to promote a circular economy and achieve sustainable development goals. [ABSTRACT FROM AUTHOR]

As a by-product of wastewater treatment, sewage sludge can be used for natural, agricultural, or energy purposes. One method of preparing sludge for management and use is solar drying. To intensify the drying process, natural additives can be used to alter the structure of the sludge and accelerate the evaporation of water. This research aimed to evaluate the influences of different organic additives in sewage sludge mixtures on the physicochemical and energy parameters of briquettes. This research was carried out without thermal boosting in a 4 × 2.5 × 2 m plastic tunnel. The tunnel was equipped with three drying stations and control and measuring equipment. In two test series, sludge additives in the form of straw and lignocellulosic materials, sawdust, bark, woodchips, and walnut shells, were used. Briquettes were made from the resulting mixtures and then subjected to physical and chemical analyses. This research showed high variability in the contents of trace elements, nitrogen, and sulphur in relation to an increase in the amount of sludge in the briquettes, which, for the briquettes made from sewage sludge, was nearly twice as high as for the briquettes made from the mixtures. The results of the flue gas analysis for the briquettes with sawdust and wood chip additives were very similar. The briquettes made from sewage sludge with lignocellulosic materials (bark and wood chips) had fuel properties similar to woody biomass, with a calorific value and heat of combustion of 15–16 MJ/kg. Fibrous additives (straw) significantly increased the strength parameters of the briquettes, by more than 50% of the value. The compositions and properties of the mixtures affected the following briquetting parameters: temperature and compressive force. The briquettes made from sewage sludge and additives can be classified according to ISO 21640 as SRFs (solid recovered fuels). In most of the results, the net calorific value (NCV) was 3 to 4; the chlorine content (CL) was 2 to 1; and the mercury content (Hg) was 1. The sewage sludge mixtures facilitated the agricultural and energy use of the briquettes. [ABSTRACT FROM AUTHOR]

Biomass bottom ash (BBA) is a by-product of the energy industry and is produced from biomass-fired thermal power plants. They represent the coarsest fraction of the recovered ash and are mostly landfilled. Several researchers have investigated the feasibility of the use of BBA as a replacement for natural aggregates in cementitious material. The utilisation of BBA in the manufacturing of concrete provides an economic and ecological way to upcycle it. At the same time, its use conserves natural resources and promotes sustainability. This review article first presents the chemical, mineralogical and physical properties of BBA, to highlight the possible effects on cementitious materials and the interest in valorising them as a building material. Secondly, the focus is on the utilisation of BBA incorporated in place of natural aggregates used in the manufacturing of concrete. This review investigates the multi-physical properties of concrete manufactured with the partial incorporation of BBA. This substitution leads to decreased workability, which can be limited by the use of admixtures. In the hardened state, a reduction in the mechanical properties is shown with BBA replacement. However, many experimental works show that BBA can be used in appropriate proportions to maintain the specified properties of the concrete. [ABSTRACT FROM AUTHOR]

Military burn pits, used for waste disposal in combat zones, involve the open-air burning of waste materials, including plastics, metals, chemicals, and medical waste. The pits release a complex mixture of occupational toxic substances, including particulate matter (PM), volatile organic compounds (VOCs), heavy metals, dioxins, and polycyclic aromatic hydrocarbons (PAHs). Air pollution significantly impacts brain health through mechanisms involving neuroinflammation. Pollutants penetrate the respiratory system, enter the bloodstream, and cross the blood–brain barrier (BBB), triggering inflammatory responses in the central nervous system (CNS). Chronic environmental exposures result in sustained inflammation, oxidative stress, and neuronal damage, contributing to neurodegenerative diseases and cognitive impairment. Veterans exposed to burn pit toxins are particularly at risk, reporting higher rates of respiratory issues, neurological conditions, cognitive impairments, and mental health disorders. Studies demonstrate that Veterans exposed to these toxins have higher rates of neuroinflammatory markers, accelerated cognitive decline, and increased risks of neurodegenerative diseases. This narrative review synthesizes the research linking airborne pollutants such as PM, VOCs, and heavy metals to neuroinflammatory processes and cognitive effects. There is a need for targeted interventions to mitigate the harmful and escalating effects of environmental air pollution exposures on the CNS, improving public health outcomes for vulnerable populations, especially for Veterans exposed to military burn pit toxins. [ABSTRACT FROM AUTHOR]

[Display omitted] • Larvae of Hermetia illucens regularly develop on PVC-MPs-supplemented diet. • PVC-MPs are ingested by the larvae and reduced in their size. • Midgut morphology is not affected by PVC-MPs in the larval diet. • PVC-MPs in the larval diet do not affect microbial alpha- and beta-diversity. • PVC-MPs selectively affect the abundances of gut bacterial and fungal taxa. In a world with a population exceeding 8 billion people and continuing to grow, pollution from food and plastic waste is causing long-term issues in ecosystems. Potential solutions may be found by exploiting insect-based bioconversion. In this context, we investigated the impact of polyvinyl chloride microparticles (PVC-MPs) on the development of Hermetia illucens (black soldier fly; BSF) and its midgut bacterial and fungal microbiota. The impact of PVC-MPs was evaluated feeding BSF larvae with a PVC-MPs-supplemented diet. The larvae exposed to different PVC-MPs concentrations (2.5%, 5%, 10% and 20% w/w) developed into adults with no significant increase in pupal mortality. Faster development and smaller pupae were observed when 20% PVC-MPs was provided. The BSF larvae ingest PVC-MPs, resulting in a reduction in MPs size. Larvae exposed to PVC-MPs did not exhibit differences in gut morphology. Regarding the impact of PVC-MPs on the structure of both bacterial and fungal communities, the overall alpha- and beta-diversity did not exhibit significant changes. However, the presence of PVC-MPs significantly affected the relative abundances of Enterobacteriaceae and Paenibacillaceae among the bacteria and of Dipodascaceae and Plectospharellaceae among the fungi (including yeast and filamentous life forms), suggesting that PVC-MP contamination has a taxa-dependent impact. These results indicate that BSF larvae can tolerate PVC-MPs in their diet, supporting the potential use of these insects in organic waste management, even in the presence of high levels of PVC-MP contamination. [ABSTRACT FROM AUTHOR]

• A microwave-assisted protocol towards biofuel precursor furfural (FF) was implemented. • Namely almond hull (AH), olive stone (OS), and wine-derived by-products were evaluated. • Mild conditions (150 °C, 10–20 min) and green strategies (AlCl 3 ·6H 2 O) were applied. • Noted molar yield (38–42 %) and selectivity (50–60 %) were achieved from AH and OS. • Sustainable waste management and biorefinery approaches were assessed. This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H 2 SO 4 , as opposed to a 37 % yield with AlCl 3 ·6H 2 O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl 3 ·6H 2 O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl 3 ·6H 2 O in contrast to H 2 SO 4 , thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles. [ABSTRACT FROM AUTHOR]

• Estimates of modeled CH 4 emission (E) data for 1,325 U.S. landfills were reviewed. • Operators use two methods to estimate E from landfills with a gas collection system. • First-order decay (FOD) method shows increasing emissions. • Collection efficiency assumption method shows decreasing emissions. • FOD method shows some agreement to remotely sensed national estimates. As part of its commitment to the United Nations Framework Convention on Climate Change, the U.S. annually develops a national estimate of methane emissions from municipal solid waste (MSW) landfills by aggregating activity data from each facility. Since 2010, the U.S. has reported a 20 % decrease in MSW landfill emissions despite a 21 % increase in tons disposed. Operator-submitted data were investigated to understand the causes of this decline. In the U.S., operators of landfills with a gas collection and control system (GCCS) calculate their facility's emissions via two separate approaches – (1) first-order decay (FOD) and (2) collection efficiency assumption (CEA) − and select either result to feed into the annual inventory. The FOD model predicts methane generation proportional to waste disposal and that approach calculated a 19 % increase in total methane generated from 2010 to 2022, whereas generation via the CEA approach decreased by 8.9 %. The amount of measured methane collected has increased 7.5 % for the same years. Discrepancies between the two models' generated methane, assumed gas collection efficiencies, and oxidized methane compound into substantive differences in national estimates. Operators more frequently select the CEA method, which results in decreased national estimates. If only the FOD method was used, U.S. MSW landfill emissions would be 1.3-1.7 times greater than current estimates which is similar to recent extrapolations from remote sensing campaigns in the U.S. Both models contain parameters with large inherent uncertainty. Without measurement methods that continuously quantify both point-source and diffuse emissions, an assessment of either equation's accuracy cannot be made. [ABSTRACT FROM AUTHOR]

The gamma shielding parameters of an admixture of waste borosilicate glass (BS) and geopolymer (GP) made from activated metakaolin are presented in the present study. The influence of the BS quantity on the density and different gamma shielding quantities is investigated over a wide gamma energy range. Four batches of the G-BS composite were prepared using the solid-state diffusion method, containing 0 (G), 10 % (G-10BS), 20 % (G-20BS), and 30 % (G-30BS) by weight of BS, respectively. The chemical compositions of the G-xBS samples were determined through X-ray fluorescence spectrometry. In addition, the density of the BS-doped geopolymers was determined using the liquid displacement method using deionized water as the displacement fluid. The theoretical determination of estimating shielding parameters began by estimating the mass (μ ρ) and linear (μ) attenuation coefficients of the geopolymers for photon energies in the range of 15 keV to 15 MeV using the XCOM data library. The B and Si content and density of the geopolymer samples increased as the BS weight proportion increased in the geopolymer. The values of the attenuation coefficients (ACs) decreased with energy. For μ, the decrease was from 9.1533 to 0.0355 cm−1, 6.7486 to 0.0374 cm−1, 10.2964 to 0.0396 cm−1, and 10.7722 to 0.0414 cm−1, while for μ ρ , it was 5.3217 to 0.0206 cm2 g-1, 5.3860 to 0.0206 cm2 g-1, 5.3627 to 0.0206 cm2 g-1, and 5.3594 to 0.0206 cm2 g-1, for G, G-10BS, G-20BS, and G-30BS, respectively. There are no significant differences between the photon energy absorption capacity of the geopolymers, especially at energies greater than 1 MeV. The photon buildup factors of the G-xBS samples have very close relative values with no clear order. The introduction of waste borosilicate glass is therefore a way of improving the photon attenuation capacity of geopolymer and, therefore, the potential of shielding applications of geopolymer-based concrete. [ABSTRACT FROM AUTHOR]

In this paper, we propose two bilevel models to cope with problems concerning waste management. The first formulation stems from a multi-objective version of the problem present in the literature, while the second one improves upon the first by taking into account a theoretical result associated with the first formulation. For both models, we provide the optimistic and the pessimistic versions. We validate these formulations in a case study in the Pathum Thani province in Thailand. Moreover, we compare the results obtained by the bilevel formulation to those obtained by a multi-objective version of the problem. Finally, we provide our thoughts on future applications in this field. [ABSTRACT FROM AUTHOR]

The primary data of micro- and macroplastics in the aquatic environment of Lake Markakol, located in the mountainous area of East Kazakhstan, are presented. The determination of micro- and macroplastics in water is based on sieving, drying, liquid oxidation, density separation and visual sorting using a microscope with a magnification of 40×. The detected plastic fragments in the aquatic environment include fishing line nets, Styrofoam balls, plastic bags, plastic bottles, wrappers, food labels and packages and other types of plastic waste. The sizes of the plastic fragments were ˃25 mm, 1.0–5.0 mm and 0.315–1.0 mm. The concentration of plastic in Lake Markakol was 837.5 µg/m3 in the tributaries and 482.1 µg/m3 in the lake water. The detected plastic mainly corresponded to sieve mesh sizes of 1.0–5.0 mm and 0.315–1.0 mm. The main sources of plastic pollution are fishing, tourism and the lack of adequate infrastructure for household waste management. These data emphasize the importance of measures to regulate plastic waste management in order to preserve the Lake Markakol ecosystem and maintain human health. [ABSTRACT FROM AUTHOR]

Logging operations of Liriodendron tulipifera L., as timber trees, and fallen leaves in autumn from ornamental trees produce a large amount of leaf waste. In this study, the allelopathy of L. tulipifera fresh and fallen leaves was investigated for the development of potential applications of leaf waste. The extracts of fresh and fallen leaves of L. tulipifera showed growth inhibitory activity against weed species, Vulpia myuros (L.) C.C.Gmel., Echinochloa crus-galli (L.) P.Beauv., and Lolium multiflorum Lam., under laboratory conditions. The powder of L. tulipifera fresh and fallen leaves also inhibited the germination of E. crus-galli under greenhouse conditions. A potent allelochemical was isolated from fresh and fallen leaf extracts through a bioassay-guided separation process, and was identified as lipiferolide. Lipiferolide inhibited the growth of L. multiflorum and Lepidum sativum in a concentration-dependent manner. This investigation suggests that the leaf waste of L. tulipifera from logging operations and fallen leaves is potentially useful for the purpose of weed control, such as through the use of soil additive materials from leaves or the creation of foliar spray from leaf extracts. The development of weed control materials using L. tulipifera leaf waste may be a means with which to minimize waste, reducing environmental impacts and economic concerns. [ABSTRACT FROM AUTHOR]

An innovative decision matrix has been developed to guide the selection and implementation of Pneumatic Urban Solid Waste Collection Systems (PUSWCS) in smart city projects. This study comprehensively collects and analyzes data on the advantages and disadvantages of pneumatic collection systems from technical, economic, and social perspectives. A decision-making tool was created to address the complexities of evaluating the desirability of incorporating PUSWCS in municipalities or specific areas, using a holistic approach. The tool assesses the technical, economic, and social feasibility of implementing PUSWCS, aligning it with the United Nations' Sustainable Development Goals (SDGs). Specific variables are measured to assess compliance with the SDGs, distinguishing technical aspects from economic and social aspects. The methodology includes surveys of system users and technicians, expert assessments, and the development of a decision matrix that cross-references study variables and SDGs. The matrix assigns numerical values to the Magnitude (M) and Impact (I) of each variable, enabling quantitative interpretation. This holistic approach accommodates the complexities of waste management and diverse stakeholder perspectives. The results demonstrate the matrix's effectiveness in accurately assessing the desirability of implementing PUSWCS. This confirms the matrix's ability to optimally integrate with innovative smart city concepts and align with long-term sustainability goals. The study concludes that the design of the decision matrix allows the collection of information from experts, users, and stakeholders about economic, social, and environmental variables and relates them to the SDGs, to obtain a numerical result that allows to decide whether in a given urban environment it is advisable to implement a PUSWCS. [ABSTRACT FROM AUTHOR]

Adsorption using biochar is a high-efficient method for removing dyes from wastewater, and it has become a hot research topic in recent years. Biochar produced from organic wastes through pyrolysis is a promising way to combine bioenergy recovery and dye removal. In this study, durian shell (DS) was used as a feedstock for biochar and bio-oil production under different pyrolysis temperatures (400, 500, and 600 °C) for bioenergy recovery. Then, the biochar was applied as the absorbent for methylene blue (MB) removal from wastewater under batch and continuous experiments. It was found that the bio-oil production was slightly affected by temperature, while the productivity of biochar decreased from 42.05% to 30.65% with the increase in pyrolysis temperature from 400 to 600 °C. Compared with the biochar produced at 500 °C (DS-500) and 600 °C (DS-600), the biochar obtained at 400 °C (DS-400) exhibited higher MB removal efficiency and adsorption capacity under various pH conditions due to the superior microstructure. A high pH condition was beneficial for the adsorption process with DS-400. Additionally, the MB removal efficiencies increased with the increase in biochar dosage by providing more activated sites. A high MB content can promote the adsorption process, but a too high MB content negatively affects the removal efficiency due to the sorption saturation. Adsorption processes are more likely to match a pseudo-second-order model by chemical reactions. In the long-term continuous experiment, MB can be effectively removed to match the discharge standard by DS-400. This study provided a sustainable pathway for organic waste disposal and dye wastewater treatment. [ABSTRACT FROM AUTHOR]

Shallow groundwater is an important resource, especially in low- and middle-income countries; however, shallow groundwater is particularly vulnerable to point sources of pollution such as latrines or unlined waste disposal ponds. The objective of this paper is to derive a quantitative criterion for siting an extraction well and an upgradient point source of pollution to ensure that they are hydraulically disconnected, i.e., that no water flows from the point source to the well. To achieve this objective, we modeled the flow of shallow groundwater considering uniform regional flow, a single point source of pollution, and a single extraction well. For any set of flow rates and upgradient point source distance, we sought the minimum "off-center distance" ymin (i.e., the distance in the direction perpendicular to regional flow) that ensures the well and the point source are hydraulically disconnected. For constituencies with access to computing resources and coding expertise, we used a computer-based method for determining ymin that is exact to within the accuracy of a root-finding algorithm; this approach is recommended when computer access is available. For constituencies lacking these resources, we determined a simple, closed-form, approximate solution for ymin that has an average error of less than 3% for the conditions we tested. For a subset of scenarios in which the point source is sufficiently far upgradient of the well (n = 77), the root mean square relative error of the approximate solution is only 0.52%. We found that ymin depends on a length parameter (Qw + Qps)/QR, where Qw is the extraction rate of the well, Qps is the injection rate of the point source, and QR is the regional groundwater flow rate per unit of perpendicular length. Either the exact solution or the closed-form approximation can help to site wells near point sources of pollution, or to site point sources near wells, in a manner that protects the health of the well user. The approximate solution is valuable because many constituencies that rely on shallow wells for water supply and latrines for sanitation also lack access to the computer resources necessary to apply the exact solution. [ABSTRACT FROM AUTHOR]

Turning to green technologies in wastewater treatment is a well-known global trend. The use of natural sorbents of plant origin or phytosorbents in order to purify water from various types of pollutants is becoming more and more popular. This solves several important problems at once: the use of harmless natural materials, reducing the cost of processing, and waste disposal. Moreover, there is a global increase in waste in the agricultural, food, woodworking, and other industries. This review presents data on the modern use of natural materials, mainly vegetable waste, as sorbents in wastewater treatment technologies. Natural materials remove ion metals, dyes, crude oil and petroleum products, and other organic and non-organic contaminants. The techniques of obtaining phytosorbents from plant raw materials are considered. The methods for activation and modification of the various phytosorbents, which provide greater sorption efficiency, are presented. The adsorption mechanisms for various water contaminants are examined, and model descriptions are shown. It has been revealed that the effectiveness of sorption interaction mainly depends on the presence of functional groups. Studies over the past twenty years have shown good prospects for the use of such materials and technologies in practice. [ABSTRACT FROM AUTHOR]

The management of landfill leachate presents a significant environmental challenge, necessitating a comprehensive and dynamic treatment approach. This comprehensive review delves into the critical issue of landfill leachate treatment, exploring its environmental impact, treatment technologies, regulatory frameworks, and the path towards sustainable management practices. This review explores the complexities of landfill leachate, emphasizing the need for sustainable waste management practices to safeguard environmental health. Our analysis highlights the evolution of conventional and advanced treatment technologies designed to mitigate these risks, focusing on membrane technologies, advanced oxidation processes, and the promising potential of emerging techniques such as adsorption and biological nutrient removal. These technologies are evaluated for their efficiency, cost implications, and sustainability impacts, underscoring the challenges and opportunities within the current landscape of leachate treatment. The review aims to provide insights into designing efficient and effective treatment systems through a detailed analysis of conventional and advanced treatment methods. By examining a case study in Changsha City, the effectiveness of a comprehensive treatment system integrating various technologies is demonstrated. The review underscores the interconnectedness of human activities, environmental health, and waste management, emphasizing the importance of a holistic approach. It stresses the continuous improvement of leachate treatment technologies and the adoption of sustainable practices to reduce the environmental footprint of landfills. Ultimately, it calls for integrating multiple treatment processes, economic considerations, and readiness to address future challenges in landfill leachate treatment, contributing to the advancement of sustainable waste management practices. [ABSTRACT FROM AUTHOR]

Sustainable waste management is an extremely important issue due to its environmental, economic, and social impacts. Knowledge of the chemical composition of the waste produced is a starting point for its valorization. This research focuses, for the first time, on the by-products of pasta condiment production, starting with their characterization. In particular, the presence of potential bioactive compounds and their variability over time have been studied. The latter aspect is crucial for the subsequent valorization of these by-products. In addition to acidity and total phenolic content, an untargeted strategy was adopted, using spectroscopic and chromatographic techniques coupled with chemometrics, to study waste samples coming from four single condiment production lines, i.e., Genoese pesto, tomato, ricotta, and ragù sauces. The presence of lycopene, polyphenols, and several valuable volatile compounds was highlighted. Their presence and relative amounts vary mainly according to the presence of tomatoes in the sauce. The results obtained at different storage times (after 0, 7, 10, and 15 days) showed that the samples studied, despite having similar chemical characteristics, underwent changes after one week of storage and then presented a relatively stable chemical profile. A general decrease is observed after 7 days for almost all the chemical variables monitored, so careful planning within the first days is required to obtain a high recovery. [ABSTRACT FROM AUTHOR]