Search

The possible synthesis of hexasilabenzene was studied as the consecutive reaction of three disilyne units in order to find a suitable substituent. Although there is a reaction pathway which leads to hexasilabenzene in the case of hydrogen (A) and phenyl (B) groups, and it is thermodynamically and kinetically favourable, the reaction can easily proceed toward octasila species which makes it impossible to keep the synthesis under control and prepare hexasilabenzene. In contrast to this, using a methylated terphenyl (D) substituent, the addition of the third disilyne unit to the four-membered silicon ring (D5) is highly unfavourable because of the steric hindrance of the substituents. The terphenyl group (C), however, seems to be a perfect substituent because the reaction pathway leading to substituted hexasilabenzene consists of thermodynamically favourable steps and small activation barriers, and further reaction is hindered by the bulky substituents. We suggest synthesizing hexasilabenzene from terphenyl-halosilanes, performing reductive dehalogenation.

Four different mechanisms and the effect of bulky groups were studied in the reaction of ({HC[CMeN(R)]2}Si, R = 2,6-diisopropylphenyl) with white phosphorus. The carefully tested B3LYP-D, ωB97X-D, and SOS-MP2 methods, by the CCSD(T) method, with cc-pVTZ basis set provided consonant results which support the reliability of our results and the applicability of these methods. The dispersion energy contribution to the total energy is estimated to about ∼70 kJ mol(-1) which proves the essential role of dispersion corrected methods. Based on the computed results we suggest a new mechanism which is fully supported by the experimental conditions. The investigation of the bulky groups clearly demonstrates an internal catalytic feature which has an essential role in the reaction mechanism. Usually bulky substituents prevent or reduce the reactivity, in this case however, substituents promote the reaction., (This journal is © The Royal Society of Chemistry 2011)

Borane complexes of aziridine, phosphirane, cyclopropylamine, cyclopropylphosphine, cyclopropylmethylamine, and cyclopropylmethylphosphine have been prepared by the reaction at low temperatures of a borane complex or diborane on the free phosphine or amine. The products characterized by NMR spectroscopy and mass spectrometry have then been investigated by photoelectron spectroscopy and B3LYP/aug-cc-pVTZ quantum chemical study. The complexation led to rotamers with structures similar to the ones of the corresponding free systems. The main geometry change with the complexation is the P-C bond elongation and the N-C bond shortening, which can be rationalized by the charge transfer attached to the electron donation. The calculated relative stability order of the conformers changes with the complexation only in the case of cyclopropylamine. The calculated complexation energies are higher for the amines, in accord with the differences observed in the flash vacuum thermolysis of methylamine-, methylphosphine-, and aziridine-borane. The photoelectron spectra indicate essential differences between the amines and phosphines toward borane complexation. The dative bond is more stable in the studied amine-boranes than in phosphine-boranes, while the sigma(B-H) orbitals are more stable in the latter compounds. The enthalpy of the hydrogen release reaction of aziridine-borane is almost thermoneutral, indicating the potential of this complex as recyclable hydrogen storage material.

This paper presents an approach for obtaining accurate interaction energies at the density functional theory level for systems where dispersion interactions are important. This approach combines Becke and Johnson's [J. Chem. Phys. 127, 154108 (2007)] method for the evaluation of dispersion energy corrections and a Hirshfeld method for partitioning of molecular polarizability tensors into atomic contributions. Due to the availability of atomic polarizability tensors, the method is extended to incorporate anisotropic contributions, which prove to be important for complexes of lower symmetry. The method is validated for a set of 18 complexes, for which interaction energies were obtained with the B3LYP, PBE, and TPSS functionals combined with the aug-cc-pVTZ basis set and compared with the values obtained at the CCSD(T) level extrapolated to a complete basis set limit. It is shown that very good quality interaction energies can be obtained by the proposed method for each of the examined functionals, the overall performance of the TPSS functional being the best, which with a slope of 1.00 in the linear regression equation and a constant term of only 0.1 kcal/mol allows to obtain accurate interaction energies without any need of a damping function for complexes close to their exact equilibrium geometry.

Size matters! The electronic structure and size-dependent stability of neutral and cationic scandium-doped copper clusters have been investigated by mass spectrometric studies (for the cations) and also quantum chemical computations. The proposed reaction paths ultimately lead to the most stable Frank-Kasper-shaped Cu(16)Sc(+) cluster (shown here), which could be the germ of a new crystallization process.Electronic structure and size-dependent stability of scandium-doped copper cluster cations, Cu(n)Sc(+), were investigated by using a dual-target dual-laser vaporization production scheme followed by mass spectrometric studies and also quantum chemical computations in the density functional theory framework. The neutral species also were studied by using computational methods. Enhanced abundances and dissociation energies were measured in the case of Cu(n)Sc(+) for n=4, 6, 8, 10 and 16, the last of these identified as being extraordinary stable. Neutral clusters are stable with n=5, 7, 9 and 15, which are isoelectronic with respect to the number of the valence s electrons with the stable cationic clusters; hence a simple electron count determines cluster properties to a great extent. The Cu(17)Sc cluster was found to be a superatomic molecule, containing Cu(16)Sc(+) and Cu(-) units; however, the charge separation is not as pronounced as in the case of CuLi. Cu(15)Sc was found to be a stable cluster with a large dissociation energy and a closed electronic structure; hence this can be regarded as a superatom, analogous to the noble gases. The main factors determining the growth patterns of these clusters are the central position of the scandium atom and the successive filling of the shell orbitals. For smaller clusters, the reaction paths appear to diverge yielding various products; however all paths ultimately lead to the most stable Frank-Kasper shaped Cu(16)Sc cluster, which in turn can be the germ of the crystallization process.

Density functional theory calculations demonstrate that the global minimum of the Cu(7)Sc potential energy surface is a seven-membered ring of copper atoms with scandium in its center, yielding a planar D(7) (h) structure. Nucleus-independent chemical shifts [NICS(1)(zz) and NICS(2)(zz)] show that this cluster has aromatic character, which is consistent with the number of 4s electrons of copper and scandium plus the 3d electrons of scandium satisfying Hückel's rule. According to a canonical MO decomposition of NICS(1)(zz) and NICS(2)(zz), the MOs consisting of the 4s atomic orbitals are mainly responsible for the aromatic behavior of the cluster. The electron localizability indicator (ELI-D) and its canonical MO decomposition (partial ELI-D) suggest that a localized basin is formed in Cu(7)Sc by the copper atoms whereas the two circular localized domains are situated below and above the ring. The planar Cu(7)Sc cluster can thus be considered as a sigma-aromatic species. These findings agree with the phenomenological shell model.

The recent approach presented by Becke and Johnson [J. Chem. Phys. 122, 154104 (2005); 123, 024101 (2005); 123, 154101 (2005); 124, 174104 (2006); 124, 014104 (2006)] for the evaluation of dispersion interactions based on the properties of the exchange-hole dipole moment is combined with a Hirshfeld-type partitioning for the molecular polarizabilities into atomic contributions, recently presented by some of the present authors [A. Krishtal et al., J. Chem. Phys. 125, 034312 (2006)]. The results on a series of nine dimers, involving neon, methane, ethene, acetylene, benzene, and CO(2), taken at their equilibrium geometry, indicate that when the C(6), C(8), and C(10) terms are taken into account, the resulting dispersion energies can be obtained deviating 3% or 8% from high level literature data [E. R. Johnson and A. D. Becke, J. Chem. Phys. 124, 174104 (2006)], without the use of a damping function, the only outlier being the parallel face-to-face benzene dimer.

High-level ab initio (CCSD(T), CBS-QB3 and CASSCF, CASPT2, MR-ACPF, MR-ACPF-2) and density functional theory (B3LYP) calculations were carried out to study the dimerization of phosphaacetylene or phosphaethyne (HCP). Seventeen low energy closed-shell and five open-shell phosphaacetylene dimers were found on the potential energy surface. Two head-to-head, one head-to-tail and three other dimerization reaction pathways were determined, all with high activation barriers, suggesting that closed-shell minima are usually kinetically stable. An open-shell head-to-head reaction pathway has also been found with moderate initial barrier (95.0 kJ mol(-1)) leading to 1,2- and 1,3-diphosphacyclobutadiene, suggesting that polymerization of HCP and oligomerization of its derivatives have open-shell mechanism. Formation of 1,2-diphosphacyclobutadiene is both thermodynamically and kinetically favored over 1,3-diphosphacyclobutadiene. A head-to-head reaction involving LiBr as a catalyst was also studied. It has been pointed out that LiBr catalyze the closed-shell mechanism. All the four possible reaction channels of this reaction yield 1,4-diphosphatriafulvene with a fairly low activation Gibbs-free energy (44.8 kJ mol(-1)), suggesting that this compound could be synthesized. This finding fully supports the experimental results.

In mixing 2,4,6-tris(2,4,6-tri-tert-butylphenyl)-1,3,6-triphosphafulvene with alkyllithium compounds and acetic acid, both of nucleophilic alkylation and electrophilic protonation occurred at the exo sp2-phosphorus atoms to afford [2,4-bis(2,4,6-tri-tert-butylphenyl)-1,3-diphosphacyclopentadienylidene](alkyl)(2,4,6-tri-tert-butylphenyl)phosphoranes which are phosphorus ylides that bear a P-H bond. A phosphorus ylide bearing both P-H and P-F bonds was obtained by reaction of 2,4,6-tris(2,4,6-tri-tert-butylphenyl)-1,3,6-triphosphafulvene with hydrogen tetrafluoroborate, and the structure was determined by X-ray crystallography. Both P=C double bond and P(+)-C(-) zwitterionic character was indicated by the metric parameters. The isolated phosphorus ylide bearing a P-H bond, [2,4-bis(2,4,6-tri-tert-butylphenyl)-1,3-diphosphacyclopentadienylidene](2,4,6-tri-tert-butylphenyl)phosphorane, showed no isomerization by H-migration to the corresponding phosphinodiphospholes, probably due to the pi-accepting ability of the unsaturated PC bonds and aromaticity of the C3P2 ring. The ylide structure and aromaticity of 2,4-diphosphacyclopenta-2,4-dienylidenephosphorane was characterized by theoretical calculations. In addition, the regioselective protonation of the lithiated phosphinodiphospholes generated from the 1,3,6-triphosphafulvene is discussed.

A detailed investigation of the electrophilic and nucleophilic character of singlet silylenes and germylenes, divalent compounds of silicon and germanium, respectively, substituted by first- and second-row elements is presented. In a first part, the Lewis acid properties of these compounds were studied through their complexation reaction with the Lewis bases NH3, PH3, and AsH3. The results indicate that this complexation is most favorable with the hardest base NH3, classifying these compounds as hard Lewis acids. This is confirmed by the linear correlation between the interaction energies and the value of the electrostatic potential, used as an approximation to the local hardness, near the empty p orbital of these compounds, indicating a charge-controlled interaction in the complex. Also the electrophilicity index, proposed by Parr et al., computed both at the global and the local level, correlates linearly with the complexation energies of the compounds with NH3. The Lewis base character of these silylenes has been investigated, through their interaction with the acids BH3 and AlH3. Also in this case, the electrostatic potential can be used to probe the reactivity of the compounds. It will finally be demonstrated that an increasing stability of the silylenes and germylenes is accompanied by an increase in their nucleophilicity and a decrease of the electrophilicity.

Vinyl, allyl, and homoallyl selenols were easily prepared by a chemoselective reduction of the corresponding selenocyanates with aluminum hydrides. Two stable vinyl and five stable allyl conformers of both series were predicted on the potential-energy surface. The interaction of SeH or SeCN groups with the vinyl group has been investigated with UV photoelectron spectroscopy and quantum chemical calculations, using the MP2/cc-pVTZ and B3LYP/cc-pVTZ levels. In the vinyl derivatives, a surprisingly strong direct conjugation of the selenium lone electron pair and the C=C double bond was observed. On the other hand, in allyl position the selenium lone pair is independent on the C=C double bond, and the hyperconjugation between the Se-C bond and the double bond is the ruling effect. Thus is clarified the type and extent of the interaction between the SeH or SeCN group and the unsaturated moiety.

It is well known, that the ring nitrogen of pyrimidine possesses basic property, electron donating groups increase basicity. According to literature data published so far pyrimidines protonate at the ring nitrogen. The present paper gives brief account of the C(5) carbon-protonation observed among triaminopyrimidine derivatives, which in some cases results in stable sigma-complexes. Steric and electronic effects responsible for carbon-protonation are investigated in simple C(5) substituted 2,4,6-triaminopyrimidine derivatives. We show new stable sigma-complexes in the triaminopyrimidine series. The paper summarizes, in Hungarian, our recently published results (J. Amer. Chem. Soc., 125, 2535-2540, 2003) as well as our new results presented in the symposium ,,Gyógyszerkémiai Gyógyszertechnológiai Szimpózium 2003".

The mechanism of 1,2-addition reactions of HF and HCl to Si=Si, Si=C, and C=C bonds has been investigated by ab initio quantum chemical methods. Geometries and relative energies of the stationary points and all the transition states were determined by using the MP2/6-311++G(d,p), B3LYP/6-311++G(d,p), and CBS-Q levels of theory. The investigated reactions can be characterized by two main thermodynamic profiles. The type in which the reagent molecule attacks a carbon atom is moderately exothermic with a high activation barrier. The second type in which a hydrogen halide attacks a silicon is strongly exothermic with a low activation energy. At the early stage of all the reactions a weakly bonded initial complex is found which indicates that the initial step of all the reactions is an electrophilic attack of hydrogen halide. The geometry and charge distribution of the transition state of the reactions indicate two main types of mechanism. If silicon is attacked, the halogen-silicon bond formation precedes the H-Y bond breaking. If, however, carbon is attacked, the first step is always an ionic dissociation of the hydrogen halide and a carbenium ion formation, which is stabilized by the C-Y bond formation in the final step of the reaction. The reaction diagrams and proposed mechanisms explain the experimentally found regioselectivity well.