Search

As the utility of magnetic resonance imaging (MRI) broadens, the importance of having specific and efficient contrast agents increases and in recent time there has been a huge development in the fields of molecular imaging and intracellular markers. Previous studies have shown that gadolinium oxide (Gd2O3) nanoparticles generate higher relaxivity than currently available Gd chelates: In addition, the Gd2O3 nanoparticles have promising properties for MRI cell tracking. The aim of the present work was to study cell labeling with Gd2O3 nanoparticles in hematopoietic cells and to improve techniques for monitoring hematopoietic stem cell migration by MRI. Particle uptake was studied in two cell lines: the hematopoietic progenitor cell line Ba/F3 and the monocytic cell line THP-1. Cells were incubated with Gd2O3 nanoparticles and it was investigated whether the transfection agent protamine sulfate increased the particle uptake. Treated cells were examined by electron microscopy and MRI, and analyzed for particle content by inductively coupled plasma sector field mass spectrometry. Results showed that particles were intracellular, however, sparsely in Ba/F3. The relaxation times were shortened with increasing particle concentration. Relaxivities, r1 and r2 at 1.5 T and 21°C, for Gd2O3 nanoparticles in different cell samples were 3.6–5.3 s-1 mM-1 and 9.6–17.2 s-1 mM-1, respectively. Protamine sulfate treatment increased the uptake in both Ba/F3 cells and THP-1 cells. However, the increased uptake did not increase the relaxation rate for THP-1 as for Ba/F3, probably due to aggregation and/or saturation effects. Viability of treated cells was not significantly decreased and thus, it was concluded that the use of Gd2O3 nanoparticles is suitable for this type of cell labeling by means of detecting and monitoring hematopoietic cells. In conclusion, Gd2O3 nanoparticles are a promising material to achieve positive intracellular MRI contrast; however, further particle development n, funding agencies|Swedish Research Council| 621-2007-3810 621-2009-5148 521-2009-3423 |VINNOVA| 2009-00194 |Center in Nanoscience and Technology at LiTH (CeNano)

Anna Hedlund1,2, Maria Ahrén3, Håkan Gustafsson1,2, Natalia Abrikossova3, Marcel Warntjes2,4, Jan-Ingvar Jönsson5, Kajsa Uvdal3, Maria Engström1,21Division of Radiology, Department of Medical and Health Sciences, 2Center for Medical Image Science and Visualization, 3Division of Molecular Surface Physics and Nanoscience, Department of Physics, Chemistry, and Biology, 4Division of Clinical Physiology, Department of Medicine and Health Sciences, 5Department of Clinical and Experimental Medicine, Experimental Hematology Unit, Linköping University, Linköping, SwedenAbstract: As the utility of magnetic resonance imaging (MRI) broadens, the importance of having specific and efficient contrast agents increases and in recent time there has been a huge development in the fields of molecular imaging and intracellular markers. Previous studies have shown that gadolinium oxide (Gd2O3) nanoparticles generate higher relaxivity than currently available Gd chelates: In addition, the Gd2O3 nanoparticles have promising properties for MRI cell tracking. The aim of the present work was to study cell labeling with Gd2O3 nanoparticles in hematopoietic cells and to improve techniques for monitoring hematopoietic stem cell migration by MRI. Particle uptake was studied in two cell lines: the hematopoietic progenitor cell line Ba/F3 and the monocytic cell line THP-1. Cells were incubated with Gd2O3 nanoparticles and it was investigated whether the transfection agent protamine sulfate increased the particle uptake. Treated cells were examined by electron microscopy and MRI, and analyzed for particle content by inductively coupled plasma sector field mass spectrometry. Results showed that particles were intracellular, however, sparsely in Ba/F3. The relaxation times were shortened with increasing particle concentration. Relaxivities, r1 and r2 at 1.5 T and 21°C, for Gd2O3 nanoparticles in different cell samples were 3.6&ndash

Self-assembled monolayers and multilayers of a noradrenaline analogue (Nor-Pt) on gold substrates as well as multilayers of noradrenaline have been investigated by means of the molecular orientation, the molecule surface interaction, the molecular composition and the functional group availability for further biointeraction processes, using X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRAS), and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. A chemical shift (1.7 eV) of the S 2p peak to lower binding energies is observed, in the XPS spectrum, indicating that the Nor-Pt molecules are chemisorbed onto the gold substrate. The IR results show that Nor-Pt adsorbate has the C=O stretching vibration modes parallel oriented relative to the gold substrate. The average tilt angle of the aromatic ring relative to the gold surface normal is determined to be approximately 51 degrees, based on the NEXAFS measurements on Nor-Pt monolayers. The experimental results and assignments are supported with theoretical studies where we use the building block principle in the spectral analysis and compare with the measurements of noradrenaline and Nor-Pt. The theoretical calculations are shown to be useful; for angle dependence NEXAFS studies as resonances with fully pi* or sigma* character are preferred for correct analysis.

n/a

We report the self-assembly of stable nanoscale coordination polymers (NCPs), which exhibit temperature-controlled guest encapsulation and release, as well as an efficient light-harvesting property. NCPs are obtained by coordination-directed organization of pi-conjugated dicarboxylate (L1) and lanthanide metal ions Gd(III), Eu(III), and Yb(III) in a DMF system. Guest molecules trans-4-styryl-1-methylpyridiniumiodide (D1) and methylene blue (D2) can be encapsulated into NCPs, and the loading amounts can be controlled by changing reaction temperatures. Small angle X-ray diffraction (SAXRD) results reveal that the self-assembled discus-like NCPs exhibit long-range ordered structures, which remain unchanged after guest encapsulations. Experimental results reveal that the negatively charged local environment around the metal connector is the driving force for the encapsulation of cationic guests. The D1 molecules encapsulated in NCPs at 140 degrees C can be released gradually at room temperature in DMF. Guest-loaded NCPs exhibit efficient light harvesting with energy transfer from the framework to the guest D1 molecule, which is studied by photoluminescence and fluorescence lifetime decays. This coordination-directed encapsulation approach is general and should be extended to the fabrication of a wide range of multifunctional nanomaterials.

This study reports ZnO nanoparticles and thin film surface modification using a two-step functionalization strategy. A small silane molecule was used to build up a stabilizing layer and for conjugation of biotin (vitamin B7), as a specific tag. Biotin was chosen because it is a well-studied bioactive molecule with high affinity for avidin. ZnO nanoparticles were synthesized by electrochemical deposition under oxidizing condition, and ZnO films were prepared by plasma-enhanced metal organic chemical vapor deposition. Both ZnO nanoparticles and ZnO thin films were surface modified by forming a (3-mercaptopropyl)trimethoxysilane (MPTS) layer followed by attachment of a biotin derivate. lodoacetyl-PEG2-biotin molecule was coupled to the thiol unit in MPTS through a substitution reaction. Powder X-ray diffraction, transmission electron microscopy, X-ray photoemission electron microscopy, atomic force microscopy. X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure spectroscopy were used to investigate the as-synthesized and functionalized ZnO materials. The measurements showed highly crystalline materials in both cases with a ZnO nanoparticle diameter of about 5 nm and a grain size of about 45 nm for the as-grown ZnO thin films. The surface modification process resulted in coupling of silanes and biotin to both the ZnO nanoparticles and ZnO thin films. The two-step functionalization strategy has a high potential for specific targeting in bioimaging probes and for recognition studies in biosensing applications.

Recently, much attention has been given to the development of biofunctionalized nanoparticles with magnetic properties for novel biomedical imaging. Guided, smart, targeting nanoparticulate magnetic resonance imaging (MRI) contrast agents inducing high MRI signal will be valuable tools for future tissue specific imaging and investigation of molecular and cellular events. In this study. We report a new design of functionalized ultrasmall rare earth based nanoparticles to be used as a positive contrast agent in NI RI. The relaxivity is compared to commercially available Gd based chelates. The synthesis, PEGylation, and dialysis of small (3-5 nm) gadolinium oxide (DEG-Gd2O3) nanoparticles are presented. The chemical and physical properties of the nanomaterial were investigated with Fourier transform infrared spectroscopy. X-ray photoelectron spectroscopy, transmission electron microscopy, and dynamic light scattering. Neutrophil activation after exposure to this nanomaterial was studied by means of fluorescence microscopy. The proton relaxation times as a function of dialysis time and functionalization were measured at 1.5 T. A capping procedure introducing stabilizing properties was designed and verified, and the dialysis effects were evaluated. A higher proton relaxivity was obtained for as-synthesized diethylene glycol (DEG)-Gd2O3 nanoparticles compared to commercial Gd-DTPA. A slight decrease of the relaxivity for as-synthesized DEG-Gd2O3 nanoparticles as a function of dialysis time was observed. The results for functionalized nanoparticles showed a considerable relaxivity increase for particles dialyzed extensively with r(1) and r(2) values approximately 4 times the corresponding values for Gd-DTPA. The microscopy study showed that PEGylated nanoparticles do not activate neutrophils in contrast to uncapped Gd2O3. Finally, the nanoparticles are equipped with Rhodamine to show that our PEGylated nanoparticles are available for further coupling chemistry, and thus pr

Nano porous silicon (PS) was formed on p-type monocrystalline silicon of 2-5 Omega cm resistivity and (100) orientation by electrochemical anodization method using HF and ethanol as the electrolytes. High density of surface states, arising due to its nano structure, is responsible for the uncontrolled oxidation in air and for the deterioration of the PS surface with time. To stabilize the material PS surface was modified by a simple and low cost chemical method using PdCl2 solution at room temperature. X-ray photoelectron spectroscopy (XPS) was performed to reveal the chemical composition and the relative concentration of palladium on the nanoporous silicon thin films. An increase of SiO2 formation was observed after PdCl2 treatment and presence of palladium was also detected on the modified surface. I-V characteristics of Al/PS junction were studied using two lateral Al contacts and a linear relationship was obtained for Pd modified PS surface. Stability of the contact was studied for a time period of around 30 days and no significant ageing effect could be observed.

A very large surface to volume ratio of nanoporous silicon (PS) produces a high density of surface states, which are responsible for uncontrolled oxidation of the PS surface. Hence it disturbs the stability of the material and also creates difficulties in the formation of a reliable electrical contact. To passivate the surface states of the nanoporous silicon, noble metals (Pd, Ru, and Pt) were dispersed on the PS surface by an electroless chemical method. GIXRD (glancing incidence X-ray diffraction) proved the crystallinity of PS and the presence of noble metals on its surface. While FESEM (field emission scanning electron microscopy) showed the morphology, the EDX (energy dispersive X-ray) line scans and digital X-ray image mapping indicated the formation of the noble metal islands on the PS surface. Dynamic SIMS (secondary ion mass spectroscopy) further confirmed the presence of noble metals and other impurities near the surface of the modified PS. The variation of the surface roughness after the noble metal modification was exhibited by AFM (atomic force microscopy). The formation of a thin oxide layer on the modified PS surface was verified by XPS (X-ray photoelectron spectroscopy).

Wide bandgap materials like SiC, ZnO, AlN form a strong platform as transducers for biosensors realized as e.g. ISFET (ion selective field effect transistor) devices or resonators. We have taken two main steps towards a multifunctional biosensor transducer. First we have successfully functionalized ZnO and SiC surfaces with e.g. APTES. For example ZnO is interesting since it may be functionalized with biomolecules without any oxidation of the surface and several sensing principles are possible. Second, ISFET devises with a porous metal gate as a semi-reference electrode are being developed. Nitric oxide, NO, is a gas which participates in the metabolism. Resistivity changes in Ga doped ZnO was demonstrated as promising for NO sensing also in humid atmosphere, in order to simulate breath., Original Publication: Anita Lloyd Spetz, Ruth Pearce, Linnea Hedin, Volodymyr Khranovskyy, Fredrik Söderlind, Per-Olov Käll, Rositsa Yakimova and Kajsa Uvdal, New transducer material concepts for biosensors and surface functionalization, Proceedings of SPIE - The International Society for Optical Engineering, ed Ulrich Schmid , 7362, 736206, 2009. http://dx.doi.org/10.1117/12.821662 Copyright 2009 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.

Electrochemical synthesis and physical characterization of ZnO nanoparticles functionalized with four different organic acids, three aromatic (benzoic, nicotinic, and trans-cinnamic acid) and one nonaromatic (formic acid), are reported. The functionalized nanoparticles have been characterized by X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV−vis, and photoluminescence spectroscopy. The adsorption of the organic acids at ZnO nanoparticles was further analyzed and interpreted using quantum-chemical density-functional theory computations. Successful functionalization of the nanoparticles was confirmed experimentally by the measured splitting of the carboxylic group stretching vibrations as well as by the N(1s) and C(1s) peaks from XPS. From a comparison between computed and experimental IR spectra, a bridging mode adsorption geometry was inferred. PL spectra exhibited a remarkably stronger near band edge emission for nanoparticles functionalized with formic acid as compared to the larger aromatic acids. From the quantum-chemical computations, this was interpreted to be due to the absence of aromatic adsorbate or surface states in the band gap of ZnO, caused by the formation of a complete monolayer of HCOOH. In the UV−vis spectra, strong charge-transfer transitions were observed.

Ultrasmall gadolinium oxide nanoparticles doped with terbium ions were synthesized by the polyol route and characterized as a potentially bifunctional material with both fluorescent and magnetic contrast agent properties. The structural, optical, and magnetic properties of the organic-acid-capped and PEGylated Gd2O3:Tb3+ nanocrystals were studied by HR-TEM, XPS, EDX, IR, PL, and SQUID. The luminescent/fluorescent property of the particles is attributable to the Tb3+ ion located on the crystal lattice of the Gd2O3 host. The paramagnetic behavior of the particles is discussed. Pilot studies investigating the capability of the nanoparticles for fluorescent labeling of living cells and as a MRI contrast agent were also performed. Cells of two cell lines (THP-1 cells and fibroblasts) were incubated with the particles, and intracellular particle distribution was visualized by confocal microscopy. The MRI relaxivity of the PEGylated nanoparticles in water at low Gd concentration was assessed showing a higher T-1 relaxation rate compared to conventional Gd-DTPA chelates and comparable to that of undoped Gd2O3 nanoparticles., On the day of the defence date the status of this article was Submitted

There is a demand for more efficient and tissue-specific MRI contrast agents and recent developments involve the design of substances useful as molecular markers and magnetic tracers. In this study, nanoparticles of gadolinium oxide (Gd2O3) have been investigated for cell labeling and capacity to generate a positive contrast. THP-1, a monocytic cell line that is phagocytic, was used and results were compared with relaxivity of particles in cell culture medium (RPMI 1640). The results showed that Gd2O3-labeled cells have shorter T1 and T2 relaxation times compared with untreated cells. A prominent difference in signal intensity was observed, indicating that Gd2O3 nanoparticles can be used as a positive contrast agent for cell labeling. The r1 for cell samples was 4.1 and 3.6 s-1 mm-1 for cell culture medium. The r2 was 17.4 and 12.9 s-1 mm-1, respectively. For r1, there was no significant difference in relaxivity between particles in cells compared to particles in cell culture medium, (pr1 = 0.36), but r2 was significantly different for the two different series (pr2 = 0.02). Viability results indicate that THP-1 cells endure treatment with Gd2O3 nanoparticles for an extended period of time and it is therefore concluded that results in this study are based on viable cells.

Synthesis of very small (about 4 nm) perovskite structured gadolinium orthoferrite nanoparticles (GdFeO3) was performed by the polyol method. The material shows promising relaxivity properties and potential as a contrast agent in magnetic resonance imaging. The perovskite nanoparticles were characterized by x-ray diffraction, transmission electron microscopy, energy dispersive x-ray spectroscopy, Fourier transform infrared spectroscopy, magnetic resonance, and magnetization measurements. Upon heating in air at 800 °C for 3 h the size of the crystals increased to about 40 nm. The crystalline structure of the heat treated compound is in good agreement with perovskite GdFeO3 as the primary product. Contributions from various secondary phases were also identified, including one hitherto unknown phase with the suggested composition 'Gd3FeO6' and isostructural with Gd3GaO6. The novel 'Gd3FeO6' phase appears to be kinetically stabilized in the nano state.

Conference proceedings

Pure and mixed monolayers of a synthetic peptide, GPR-i3n, derived from the third intracellular loop of the α2 adrenergic receptor and a shorter inactive oligopeptide, N-formyl-(Gly)3-(Cys) (called 3GC), were prepared on gold surfaces. The mixing ratio of the GPR-i3n and 3GC was used to control G-protein binding capability. The GPR-i3n peptide is specially designed for bovine G-protein selectivity and has been proven to have high affinity to G-proteins [Vahlberg, C.; Petoral, R. M., Jr.; Lindell, C.; Broo, K.; Uvdal, K. Langmuir 2006, 22 (17), 7260−7264]. Pure 3GC monolayers show very low protein adsorption capability. In this study, 3GC is chosen as a coadsorbent, with the aim to induce molecular conformational changes during monolayer formation to enhance G-protein adsorption. A full characterization of the mixed monolayers was done. The monolayer thickness and the mass-related surface coverage for both GPR-i3n and 3GC were investigated using radio labeling. The GPR-i3n was labeled by 125I-targeting tyrosine, and the activity was measured by using radioimmunoassay (RIA). The formation and chemical composition of GPR-i3n and 3GC monolayers were investigated using X-ray photoelectron spectroscopy, and it is shown that both GPR-i3n and 3GC bind chemically to the gold surface. The interaction between the mixed monolayers and G-proteins was investigated by means of real-time surface plasmon resonance. There is a higher protein binding capacity to the monolayer when the GPR-i3n peptide is intermixed with the 3GC coadsorbent, despite the fact that the 3GC itself has a very low G-protein binding capability. This supports a molecular reorientation at the surface, while 3GC is intermixed with GPR-i3n.

The search for materials and systems, capable of operating long term under physiological conditions, has been a strategy for many research groups during the past years. Silicon carbide (SiC) is a material, which can meet the demands due to its high biocompatibility, high inertness to biological tissues and to aggressive environment, and the possibility to make all types of electronic devices. This paper reviews progress in biomedical and biosensor related research on SiC. For example, less biofouling and platelet aggregation when exposed to blood is taken advantage of in a variety of medical implantable materials while the robust semiconducting properties can be explored in surface functionalized bioelectronic devices. © 2007 IOP Publishing Ltd.

The objectives of this work are to contribute to the knowledge about physical and chemical properties of WBG semiconductors, such as ZnO and GaN towards development of advanced bio- and chemical sensors. For the semiconductors, growth techniques typically yielding single crystal material are applied. Thin epitaxial quality films of ZnO and GaN are fabricated on SiC or sapphire substrates. An emphasis is given to ZnO due to the interesting combination of the semiconductor and oxide properties. Surface bio-functionalization of ZnO is performed by APTES, MPA or MP-TMS molecules. We have compared some of the results to (hydroxylated) GaN surfaces functionalized by MP-TMS. The covalent attachment of the self-assembled biomolecular layers has been proven by XPS analysis. For complementary electrical characterization impedance spectroscopy measurements were performed. The results are intended to serve the realization of bioelectronic transducer devices based on SiC or GaN transistors with a ZnO gate layer. To take advantage of the catalytic properties of ZnO, initial prototypes of chemical sensors for gas sensing are processed on ZnO deposited either on SiC or on sapphire and they are further tested for the response to reducing or oxidizing gas ambient. The sensor devices show sensitivity to oxygen in the surface resistivity mode while a Pt Schottky contact ZnO/SiC device responds to reducing gases. These results are compared to published results on Pt/GaN Schottky diodes. © 2007 Elsevier B.V. All rights reserved.

Electrochemical impedance spectroscopy was employed to explore the possibility of relating the permeation of electrolyte ions in ?-functionalized self-assembled monolayers to structural or polarity changes induced by interaction with metal ions. The monolayers were based on alkanethiols modified with a phosphorylated tyrosine analogue, which from previous work are known to drastically change their organization on gold surfaces upon interaction with aluminum and magnesium ions. The ion permeation was evaluated by using relatively low excitation frequencies, 1000 to 2 Hz, and quantified by an extra resistive component in the equivalent circuit (R SAM). The extent of ion permeation influenced by the dc potential, the electrolyte concentration, the functional group, and the thiol length were also investigated. It was, for example, found that RSAM decreased ~20% when the thiol organization collapsed and that RSAM increased ~4-5 times when the electrolyte concentration was decreased by 1 order of magnitude. Interesting observations were also made regarding the potential dependence of RSAM and the double layer capacitance. The evaluation of the ion permeation can be used to indirectly detect whether the organization of a SAM is influenced by, for example, electric fields or chemical and biological interactions. This analysis can be performed without addition of redox species, but is on the other hand complicated by the fact that other factors also influence the presence of ions within the monolayer. In addition, a second parallel RC process was obtained in some of the impedance spectra when using even lower frequencies, and its resistive component revealed different results compared to RSAM. Such data may be useful for the understanding of complex double layer phenomena at modified electrodes. © 2007 American Chemical Society.

Surface functionalization of wide band gap semiconductors, SiC, ZnO, and GaN, with organosilane is reported. Formation of self-assembled monolayers of mercaptopropyltrimethoxysilane is confirmed by x-ray photoelectron spectroscopy and atomic force microscopy. The molecules are adsorbed on the surfaces through the silane groups with the free thiol groups molecularly oriented away from the surface. Moreover, chemisorption via the thiolate is observed for the ZnO surface. Immobilization of a model biomolecule to the functionalized surface is demonstrated. An amino acid derivative, i.e., phosphotyrosine derived thiol, is linked on the functionalized ZnO and GaN surfaces via formation of disulfide bridges. © 2007 American Institute of Physics.

The size distribution and magnetic properties of ultra-small gadolinium oxide crystals (US-Gd2O3) were studied, and the impact of polyethylene glycol capping on the relaxivity constants (r1, r2) and signal intensity with this contrast agent was investigated. Size distribution and magnetic properties of US-Gd2O3 nanocrystals were measured with a TEM and PPMS magnetometer. For relaxation studies, diethylene glycol (DEG)-capped US-Gd2O3 nanocrystals were reacted with PEG-silane (MW 5000). Suspensions were adequately dialyzed in water to eliminate traces of Gd3+ and surfactants. The particle hydrodynamic radius was measured with dynamic light scattering (DLS) and the proton relaxation times were measured with a 1.5 T MRI scanner. Parallel studies were performed with DEG–Gd2O3 and PEG-silane–SPGO (Gd2O3,< 40 nm diameter). The small and narrow size distribution of US-Gd2O3 was confirmed with TEM (~3 nm) and DLS. PEG-silane–US-Gd2O3 relaxation parameters were twice as high as for Gd–DTPA and the r2/r1 ratio was 1.4. PEG-silane–SPGO gave low r1 relaxivities and high r2/r1 ratios, less compatible with positive contrast agent requirements. Higher r1 were obtained with PEG-silane in comparison to DEG–Gd2O3. Treatment of DEG–US-Gd2O3 with PEG-silane provides enhanced relaxivity while preventing aggregation of the oxide cores. This study confirms that PEG-covered Gd2O3 nanoparticles can be used for positively contrasted MR applications requiring stability, biocompatible coatings and nanocrystal functionalization.

Conference proceedings

Conference proceedings

Invited talker

The affinity of α2A-adrenergic receptor (α2A-AR) derived peptide adsorbates for the functional bovine brain G-protein is studied in the search for the minimum sequence recognition. Three short peptides (GPR-i2c, GPR-i3n, and GPR-i3c) are designed to mimic the second and third intracellular loops of the receptor. X-ray photoelectron spectroscopy is used to study the chemical composition of the peptides and the binding strength to the surfaces. Chemisorption of the peptides to the gold substrates is observed. Infrared spectroscopy is used to study the characteristic absorption bands of the peptides. The presence of peptides on the surfaces is verified by prominent amide I and amide II bands. The interaction between the peptides and the G-protein is studied with surface plasmon resonance. It is shown that GPR-i3n has the highest affinity for the G-protein. Equilibrium analysis of the binding shows that the G-protein keeps its native conformation when interacting with GPR-i3c, but during the interaction with GPR-i2c and GPR-i3n the conformation of G-protein is changed, leading to the formation of aggregates and/or multilayers.

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection−absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.

Invited talker

Wide band gap materials such as SiC, AlN, GaN, ZnO, and diamond have excellent properties such as high operation temperature when used as field effect devices and a high resonating frequency of the substrate materials used in piezoelectric resonator devices. Integration of FET and resonating sensors on the same chip enables powerful miniaturized devices, which can deliver increased information about a gas mixture or complex liquid. Examples of sensor devices based on different wide band gap materials will be given.

Tetrathiafulvalene (TTF) derivative substituted with two butyl- and two dodecylthiol chains is adsorbed on polycrystalline gold. The TTF-derived thiol adsorbates were characterized by ellipsometry, contact angle goniometry, infrared and X-ray photoelectron spectroscopy and cyclic voltammetry. The molecule is strongly anchored on the gold surface through the sulfur terminating the alkylthiol chains. On the average, the TTF moiety is oriented extended away from the gold surface. The topmost layer of the film containing the dibutyl chains is disordered with gauche defects. The molecule was organized with majority of the alkylthiol chains bound to the gold surface. There are indications of pinholes in the monolayer due to steric hindrance of the bulky TTF rings. The molecular systems consisting of an electroactive pi-system such as TTF, are promising for thin-film field effect transistor application., QC 20110826

The surface interactions between Y2O3 nanocrystals and the organic molecules formic acid, diethylene glycol (DEG), and tetramethoxy silane (TMOS), have been studied experimentally and by quantum chemical calculations with the intent to elucidate the chemisorption characteristics such as adsorbate vibrational spectra and adsorption structures. Nanocrystal synthesis was performed by a colloidal method based on polyols and by a rapid combustion method. The products were experimentally characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). In the quantum chemical calculations, the B3LYP hybrid density functional ab initio method was used to study the chemisorption of formic acid, DEG and TMOS at the surface of Y12O18 clusters. From a comparison of calculated and experimental vibrational spectra, the binding mode for formic acid on Y2O3 was inferred to be of bridge or bidentate type. The XPS and FT-IR experiments showed that DEG is chemisorbed on the particle surface. The experimental IR spectra of DEG chemisorbed on Y2O3 were consistent with an adsorption mode where the hydroxyl groups are deprotonated according to the quantum-chemical computations. The adsorption energy is of the order of 370 kJ mol−1 for formic acid, 550 kJ mol−1 for DEG, and 60 kJ mol−1 for TMOS, according to the quantum chemical calculations.

Nanocrystals of Gd2O3 have been prepared by various methods, using, e.g., trioctylphosphine oxide (TOPO), diethylene glycol (DEG) or glycine. The crystalline particles were of sizes 5 to 15 nm. Different carboxylic acids, e.g., oleic acid or citric acid, were adsorbed onto the surface of the particles made with DEG. IR measurements show that the molecules coordinate to the Gd2O3 surface via the carboxylate group in a bidentate or bridging manner. The organic-acid/particle complexes were characterised by XRPD, TEM, FTIR, Raman, and XPS.

In this work, near-edge x-ray absorption fine structure spectroscopy (NEXAFS) experiment is done to obtain the chemical and structural information about the occurrence and the average orientation of unoccupied molecular orbitals within the organic films. Amino acid, such as Tyrosine and 3,4-dihydroxyphenylalanine (DOPA), is linked to a thiol through a peptide bond and is adsorbed and self-assembled to polycrystalline gold surfaces. Results from the C k-edge and O k-edge spectra serves as fingerprints to each amino acid analogues. The average orientation of the molecules relative to the gold surface is determined from the polarization effects observed as intensity changes of the peaks in the spectra when the x-ray incidence angle is varied. It is assumed that the average tilt angle of the main molecular axis of amino acid linked to short amidethiol is based on the deduced orientation of the peptide bond. © Physica Scripta 2005.

Monolayers of tert-butyl carbamate-terminated thiol were formed by adsorption of the molecules onto polycrystalline gold substrate. The adsorbates were studied using techniques as X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and infrared reflection−absorption spectroscopy (IRAS). The results provide the electronic structure, composition, characteristic fingerprint, and orientation of the molecular adsorbate. XPS verified that the thiolate group is chemically bonded to the gold surface and that a complete chemisorption of the molecule occurs. Elemental depth profiling by varying the excitation energy in XPS supports the angle-dependent XPS results. Both techniques showed that the tert-butyl group is oriented away from the gold surface. A nearly parallel orientation of the carbonyl group relative to the gold surface is deduced from the IRAS results. The main molecular axis is estimated to have an average tilt angle of about 38° relative to the gold surface normal on the basis of the NEXAFS results. Cyclic voltammetry indicates a less blocking capability of the adsorbates. Overall, the molecules are oriented in an upright manner with indications of presence of pinholes and/or defects possibly due to steric hindrance of the bulky tert-butyl group. This molecular system is envisioned to be of use for surface-based organic synthesis on gold substrates.