Search

The corrosion inhibition of 5- O -β- D -glucopyranosyl-7-methoxy-3',4'-dihydroxy-4-phenylcoumarin (4-PC) in AISI 1018 steel immersed in 3% NaCl + CO 2 was studied by electrochemical impedance spectroscopy (EIS). The results showed that, at just 10 ppm, 4-PC exerted protection against corrosion with ղ = 90% and 97% at 100 rpm. At static conditions, the polarization curves indicated that, at 5 ppm, the inhibitor presented anodic behavior, while at 10 and 50 ppm, there was a cathodic-type inhibitor. The inhibitor adsorption was demonstrated to be chemisorption, according to the Langmuir isotherm for 100 and 500 rpm. By means of SEM-EDS, the corrosion inhibition was demonstrated, as well as the fact that the organic compound was effective for up to 72 h of immersion. At static conditions, dispersion-corrected density functional theory results reveal that the chemical bonds established by the phenyl group of 4-PC are responsible of the chemisorption on the steel surface. According with Fukui reactivity indices, the molecules adsorbed on the metal surface provide a protective cover against nucleophilic and electrophilic attacks, pointing to the corrosion inhibition properties of 4-PC.

Organic acids, typically derived from an oil-based value chain, are frequently used as corrosion inhibitors in industrial metal working fluids. The criteria for selection of these corrosion inhibitors have changed in the last decades, and are today not only performance-driven, but influenced by ecological considerations, toxicity and regulatory standards. We present scalable semisynthetic approaches to organic corrosion inhibitors based on phosphonic acids from renewable resources. They have been evaluated by chip filter assay, potentiodynamic polarization measurements, electrochemical impedance measurements and gravimetry for corrosion protection of iron and steel in an aqueous environment at slightly alkaline pH. The efficacy of several phosphonic acids tested was found to be strongly dependent on structural features influencing molecular self-assembly of protective layers, and the solubility of salts formed with di- and trivalent cations from the media or formed during corrosion. A carboxyphosphonic acid (derived from castor oil) was found to have remarkable anticorrosive effects in all media tested. We attribute the anticorrosion properties of this carboxyphosphonic acid to the formation of particularly stable protective layers on the metal surface. It might thus serve as a commercially attractive substitute for current acidic corrosion inhibitors, derived from renewable resources.

Microbiologically influenced corrosion and biofouling of steels depend on the adsorption of a conditioning film and subsequent attachment of bacteria. Extracellular deoxyribonucleic acid (eDNA) and amino acids are biologically critical nutrient sources and are ubiquitous in marine environments. However, little is known about their role as conditioning film molecules in early biofilm formation on metallic surfaces. The present study evaluated the capacity for eDNA and amino acids to form a conditioning film on carbon steel (CS), and subsequently, the influence of these conditioning films on bacterial attachment using a marine bacterial strain. Conditioning films of eDNA or amino acids were formed on CS through physical adsorption. Biochemical and microscopic analysis of eDNA conditioning, amino acid conditioning and control CS surfaces demonstrated that organic conditioning surfaces promoted bacterial attachment. The results highlight the importance of conditioning the surface in initial bacterial attachment to steel.

Mackinawite was biologically synthetized by immersing carbon steel coupons in artificial seawater containing Sulphate-Reducing Bacteria (SRB) for 6   months. These coupons were removed from the culture medium solution and some were stored in air while others were placed in SRB-free culture medium solution. In operando Raman spectroscopy was used to analyse all these coupons immediately after extraction from the incubation medium and nanocrystalline, well-crystallized and partially oxidized mackinawite was detected. The evolution of these corrosion products was also monitored as a function of ageing time with this technique. Nanocrystalline and well-crystallised mackinawite transformed into partially oxidised mackinawite, greigite and sulphate green rust for an ageing time between 4 and 72   h. After 120   h, maghemite, magnetite, lepidocrocite, goethite appeared on the coupons placed in SRB-free culture medium solution as opposed to those stored in air atmosphere. Greigite and sulphate green rust were not observed for Raman measurements performed in air.

Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environments. It is also important for investigating catalytic materials, direct reduction of an oxide, particular surface science reactions or nanoparticle fabrication routes. This manuscript realizes such experimental protocols upon a thermochemical reaction chamber called the "Reacthub" and allows for transferring treated materials under cryogenic & ultrahigh vacuum (UHV) workflow conditions for characterisation by either atom probe or scanning Xe+/electron microscopies. Two examples are discussed in the present study. One protocol was in the deuterium gas charging (25 kPa D2 at 200°C) of a high-manganese twinning-induced-plasticity (TWIP) steel and characterization of the ingress and trapping of hydrogen at various features (grain boundaries in particular) in efforts to relate this to the steel's hydrogen embrittlement susceptibility. Deuterium was successfully detected after gas charging but most contrast originated from the complex ion FeOD+ signal and the feature may be an artefact. The second example considered the direct deuterium reduction (5 kPa D2 at 700°C) of a single crystal wüstite (FeO) sample, demonstrating that under a standard thermochemical treatment causes rapid reduction upon the nanoscale. In each case, further studies are required for complete confidence about these phenomena, but these experiments successfully demonstrate that how an ex-situ thermochemical treatment can be realised that captures environmentally-sensitive transient states that can be analysed by atomic-scale by atom probe microscope., Competing Interests: The authors have declared that no competing interests exist.

The mechanical properties of loess-steel interface are of great significance for understanding the residual strength and deformation of loess. However, the undisturbed loess has significant structural properties, while the remolded loess has weak structural properties. There are few reports on the mechanical properties of loess-steel interface from the structural point of view. This paper focused on the ring shear test between undisturbed loess as well as its remolded loess and steel interface under the same physical mechanics and test conditions (water content, shear rate and vertical pressure), and explored the influence mechanism of structure on the mechanical deformation characteristics of steel-loess interface. The results show that the shear rate has little effect on the residual strength of the undisturbed and remolded loess-steel interface. However, the water content has a significant influence on the residual strength of the loess-steel interface, moreover, the residual internal friction angle is the dominant factor supporting the residual strength of the loess-steel interface. In general, the residual strength of the undisturbed loess-steel interface is greater than that of the remolded loess specimen (for example, the maximum percentage of residual strength difference between undisturbed and remolded loess specimens under the same moisture content is 6.8%), which is because that compared with the mosaic arrangement structure of the remolded loess, the overhead arrangement structure of the undisturbed loess skeleton particles makes the loess particles on the loess-steel interface re-adjust the arrangement direction earlier and reach a stable speed relatively faster. The loess particles with angular angles in the undisturbed loess make the residual internal friction between the particles greater than the smoother particles of the remolded loess (for example, the maximum percentage of residual cohesion difference between undisturbed and remolded loess specimens under the same vertical pressure is 4.29%), and the intact cement between undisturbed loess particles brings stronger cohesion than the remolded loess particles with destroyed cement (for example, the maximum difference percentage of residual cohesion between undisturbed and remolded soil specimens under the same vertical pressure is 33.80%). The test results provide experimental basis for further revealing the influence mechanism of structure, and parameter basis for similar engineering construction., Competing Interests: The authors have declared that no competing interests exist.

Flavonoids, alkaloids, glucosides and tannins with good corrosion inhibition are the main natural components in plants. In this work, procyanidin B2 (PCB2), a natural flavonoid, was firstly isolated from Uncaria laevigata. Corrosion inhibition, chemical reactivity and adsorption of PCB2 on Q235 carbon steel were described by experimental and theoretical studies. The inhibition performance of PCB2 as a green corrosion inhibitor was evaluated by electrochemical and gravimetric tests. The binding active sites and activities thereof on the steel surface were illustrated by quantum chemistry, and the equilibrium configuration was predicted by molecular dynamics simulation. PCB2 exhibits good corrosion inhibition on Q235 steel over a wide temperature range. The electrochemical results show that PCB2 is a mixed inhibitor, and its inhibition efficiency increases with the addition of PCB2 concentration. Moreover, the protective film is formed on the steel and the active corrosion sites are blocked significantly by surface analysis. Additionally, the theoretical calculation proves a strong interaction between PCB2 molecule and carbon steel. Besides, the antimicrobial activity was also preliminarily studied. This suggests that PCB2 exhibits better antimicrobial activity against many Gram-positive and Gram-negative bacteria. As a novel green corrosion inhibitor and antimicrobial agent, PCB2 is worthy of further exploitation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Results from sampling healthcare surfaces for pathogens are difficult to interpret without understanding the factors that influence pathogen detection. We investigated the recovery of four healthcare-associated pathogens from three common surface materials, and how a body fluid simulant (artificial test soil, ATS), deposition method, and contamination levels influence the percent of organisms recovered (%R). Known quantities of carbapenemase-producing KPC+ Klebsiella pneumoniae (KPC), Acinetobacter baumannii, vancomycin-resistant Enterococcus faecalis, and Clostridioides difficile spores (CD) were suspended in Butterfield's buffer or ATS, deposited on 323cm2 steel, plastic, and laminate surfaces, allowed to dry 1h, then sampled with a cellulose sponge wipe. Bacteria were eluted, cultured, CFU counted and %R determined relative to the inoculum. The %R varied by organism, from <1% (KPC) to almost 60% (CD) and was more dependent upon the organism's characteristics and presence of ATS than on surface type. KPC persistence as determined by culture also declined by >1 log10 within the 60 min drying time. For all organisms, the %R was significantly greater if suspended in ATS than if suspended in Butterfield's buffer (p<0.05), and for most organisms the %R was not significantly different when sampled from any of the three surfaces. Organisms deposited in multiple droplets were recovered at equal or higher %R than if spread evenly on the surface. This work assists in interpreting data collected while investigating a healthcare infection outbreak or while conducting infection intervention studies., Competing Interests: The authors have declared that no competing interests exist.

Background: Metal corrosion in seawater has been extensively studied in surface and shallow waters. However, infrastructure is increasingly being installed in deep-sea environments, where extremes of temperature, salinity, and high hydrostatic pressure increase the costs and logistical challenges associated with monitoring corrosion. Moreover, there is currently only a rudimentary understanding of the role of microbially induced corrosion, which has rarely been studied in the deep-sea. We report here an integrative study of the biofilms growing on the surface of corroding mooring chain links that had been deployed for 10 years at ~2 km depth and developed a model of microbially induced corrosion based on flux-balance analysis., Methods: We used optical emission spectrometry to analyze the chemical composition of the mooring chain and energy-dispersive X-ray spectrometry coupled with scanning electron microscopy to identify corrosion products and ultrastructural features. The taxonomic structure of the microbiome was determined using shotgun metagenomics and was confirmed by 16S amplicon analysis and quantitative PCR of the dsrB gene. The functional capacity was further analyzed by generating binned, genomic assemblies and performing flux-balance analysis on the metabolism of the dominant taxa., Results: The surface of the chain links showed intensive and localized corrosion with structural features typical of microbially induced corrosion. The microbiome on the links differed considerably from that of the surrounding sediment, suggesting selection for specific metal-corroding biofilms dominated by sulfur-cycling bacteria. The core metabolism of the microbiome was reconstructed to generate a mechanistic model that combines biotic and abiotic corrosion. Based on this metabolic model, we propose that sulfate reduction and sulfur disproportionation might play key roles in deep-sea corrosion., Conclusions: The corrosion rate observed was higher than what could be expected from abiotic corrosion mechanisms under these environmental conditions. High corrosion rate and the form of corrosion (deep pitting) suggest that the corrosion of the chain links was driven by both abiotic and biotic processes. We posit that the corrosion is driven by deep-sea sulfur-cycling microorganisms which may gain energy by accelerating the reaction between metallic iron and elemental sulfur. The results of this field study provide important new insights on the ecophysiology of the corrosion process in the deep sea., (© 2022. The Author(s).)

In order to investigate the effect of pre-loading damage on the structural performance of Carbon Fiber Reinforced Polymer (CFRP) strengthened Reinforced Concrete (R.C.) beams, experimental and Finite Element Modelling (FEM) investigation was carried out on six R.C. beams. Five of the R.C. beams were damaged up to different levels of strain in the main steel bars before Flexure CFRP strengthening. One of the R.C. beams loaded up to failure and was kept as a control beam for comparison. The experimental results showed that the failure mode of the CFRP strengthened specimen was controlled by CFRP debonding followed by concrete crushing; however, the control beam failed in concrete crushing after yielding the steel bars, which is a ductile failure. The CFRP sheet increases the strength and initial stiffness of the R.C. beams and reduces ductility and toughness. Also, CFRP application increases the first crack and yielding steel bars load by 87.4% and 34.4%, respectively. Furthermore, the pre-damage level does not influence the strength and ductility of the strengthened R.C. beams except for the highest damage levels, which experienced a slight decrease in load capacity and ductility. However, the initial stiffness decreases with increasing pre-damage levels by 40%. Design guideline ACI 440.2R (2004) predicts the ultimate load capacity marvelously for externally bonded Fiber-Reinforced Polymer (FRP) beams compared to the experimental maximum load capacity. The excellent agreement between experimental and FEM results indicates that the constitutive models used for concrete and reinforcement and the cohesive interface model can well capture fracture behavior. However, The FEM analysis predicts the beam to be slightly stiffer and more robust, probably because of the assumed perfect bond between concrete and reinforcement. The developed FEM can be used for further parametric study., Competing Interests: The authors have declared that no competing interests exist.

The automobile industry contributes significantly to global energy use and carbon emissions. Hence, there are significant economic and environmental benefits in recovering materials from end-of-life vehicles (ELVs). Here, the remanufacturing of waste steel sheet (WSS) from ELVs into useful mesh steel sheet (MSS) for metal forming applications was evaluated based on its technological, economic, and environmental feasibility. A remanufacturing plant with a dismantling capacity of over 30,171 ELV/year and a recovery capacity of 1000 m2/d of WSS was used as a case study. Remanufacturing can achieve a total reduction of ~3800 kg CO2/ELV and an economic benefit of ~775 USD/ELV compared with conventional recycling. The calculated feasibility indexes were similar to or exceeded standard feasibility thresholds, indicating that WSS remanufacturing is a viable sustainable development route and has synergistic benefits when combined with existing recycling plants, especially in developing countries as small-to-medium enterprises., Competing Interests: The authors have declared that no competing interests exist.

Localized corrosion of submerged steel H-piles was detected in a Florida bridge spanning over a brackish river. Analysis of the water showed proliferation of sulfate reducing bacteria (SRB). The steel piles had coincident heavy marine growth that may support biofilms and biocorrosion. The objective of the research described here was to identify the role of the physical morphologies of macrofouling on SRB activity and the aggravation of microbiologically influences corrosion (MIC) of submerged steel bridge. Laboratory experiments were carried out in nutrient-rich environments inoculated with SRB, with both porous and laminate crevice conditions characteristic of soft and hard marine fouling. It was confirmed that SRB proliferation can occur within the crevice environments, but aeration levels under crevices with interaction with the bulk solution can affect SRB activity. Electrochemical impedance spectroscopy provided separation of environmental parameters and surface reaction parameters for the complicated systems relating to corrosion under the porous and laminate crevice geometries., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

EET (extracellular electron transfer) is behind MIC (microbiologically influenced corrosion) of carbon steel by SRB (sulfate reducing bacteria). This work evaluated 20 ppm (w/w) riboflavin (an electron mediator) acceleration of C1018 carbon steel MIC by Desulfovibrio ferrophilus IS5 in enriched artificial seawater (EASW) after 7-d incubation in anaerobic vials at 28 °C. Twenty ppm riboflavin did not significantly change cell growth or alter the corrosion product varieties, but it led to 52% increase in weight loss and 105% increase in pit depth, compared to the control without 20 ppm riboflavin. With 20 ppm riboflavin supplement in EASW, D. ferrophilus yielded weight loss-based corrosion rate of 1.57 mm/y (61.8 mpy), and pit depth growth rate of 2.88 mm/y (113 mpy), highest reported for short-term pure-strain SRB MIC of carbon steel. Electrochemical tests in 450 mL glass cells indicated that the biofilm responded rather quickly to the riboflavin injection (20 ppm in broth) to the culture medium. Polarization resistance (R p ) began to decrease within minutes after injection. Within 2 h, the riboflavin injection led to 31% decrease in R p and 35% decrease in R ct  + R f from electrochemical impedance spectroscopy (EIS). The Tafel corrosion current density increased 63% 2 h after the injection., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The antagonism between strength and resistance to hydrogen embrittlement in metallic materials is an intrinsic obstacle to the design of lightweight yet reliable structural components operated in hydrogen-containing environments. Economical and scalable microstructural solutions to this challenge must be found. Here, we introduce a counterintuitive strategy to exploit the typically undesired chemical heterogeneity within the material's microstructure that enables local enhancement of crack resistance and local hydrogen trapping. We use this approach in a manganese-containing high-strength steel and produce a high dispersion of manganese-rich zones within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting hydrogen-induced microcracks and thus interrupting the percolation of hydrogen-assisted damage. This results in a superior hydrogen embrittlement resistance (better by a factor of two) without sacrificing the material's strength and ductility. The strategy of exploiting chemical heterogeneities, rather than avoiding them, broadens the horizon for microstructure engineering via advanced thermomechanical processing., (© 2021. The Author(s).)

With the development of electrified railways and high-voltage transmission lines, it is often inevitable that buried metal structures are subjected to interference from the alternating current (AC) induced by the neighboring power facilities. Commonly found in soil, sulfate-reducing bacteria (SRB) have the capability to accelerate metal corrosion. In this paper, with electrochemical methods, surface analysis techniques, and weight-loss test, the influence of AC and SRB on the X80 steel corrosion behavior was explored in coastal saline soil. The results revealed that the 100 A m -2 AC inhibited the growth of the sessile and planktonic SRB cell. Under the action of 100 A m -2 AC, the metabolic activity of viable bacteria was enhanced, and the process of extracellular electron transfer was accelerated. When both AC and SRB were introduced, the maximum pit depth (76.2 μm) increased significantly to be 15 times higher than in the control condition (4.9 μm). Both SRB and AC played a role in enhancing corrosion. The corrosion rate of the AC-influenced specimen was far higher than that of the SRB-influenced specimen, while SRB and AC produced a synergistic effect on the enhanced corrosion of the specimen., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Crevice corrosion of X80 carbon steel in simulated seawater with the presence of SRB was studied by surface analysis and electrochemical measurements. The electrode inside crevice was seriously corroded. Large amount of corrosion products accumulated along the crevice mouth. Galvanic current densities measurements confirmed that there was a galvanic effect between the carbon steel at the crevice interior and exterior during the crevice corrosion. The difference in the sessile SRB cells quantities and SRB biofilms developments inside and outside crevice caused the galvanic effect between the carbon steel inside and outside the crevice, which further induced crevice corrosion. Increased crevice width reduced the galvanic effect, resulting in less crevice corrosion in wider crevice., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Extreme conditions and the availability of determinate substrates in oil fields promote the growth of a specific microbiome. Sulfate-reducing bacteria (SRB) and acid-producing bacteria (APB) are usually found in these places and can harm important processes due to increases in corrosion rates, biofouling and reservoir biosouring. Biocides such as glutaraldehyde, dibromo-nitrilopropionamide (DBNPA), tetrakis (hydroxymethyl) phosphonium sulfate (THPS) and alkyl dimethyl benzyl ammonium chloride (ADBAC) are commonly used in oil fields to mitigate uncontrolled microbial growth. The aim of this work was to evaluate the differences among microbiome compositions and their resistance to standard biocides in four different Brazilian produced water samples, two from a Southeast Brazil offshore oil field and two from different Northeast Brazil onshore oil fields. Microbiome evaluations were carried out through 16S rRNA amplicon sequencing. To evaluate the biocidal resistance, the Minimum Inhibitory Concentration (MIC) of the standard biocides were analyzed using enriched consortia of SRB and APB from the produced water samples. The data showed important differences in terms of taxonomy but similar functional characterization, indicating the high diversity of the microbiomes. The APB and SRB consortia demonstrated varying resistance levels against the biocides. These results will help to customize biocidal treatments in oil fields., (© 2021. The Author(s).)

Extract of natural plants is one of the most important metallic corrosion inhibitors. They are readily available, nontoxic, environmentally friendly, biodegradable, highly efficient, and renewable. The present project focuses on the corrosion inhibition effects of Peganum Harmala leaf extract. The equivalent circuit with two time constants with film and charge transfer components gave the best fitting of impedance data. Extraction of active species by sonication proved to be an effective new method to extract the inhibitors. High percent inhibition efficacy IE% of 98% for 283.4 ppm solutions was attained using impedance spectroscopy EIS measurements. The values of charge transfer R ct increases while the double layer capacitance C dl values decrease with increasing Harmal extract concentration. This indicates the formation of protective film. The polarization curves show that the Harmal extract acts as a cathodic-type inhibitor. It is found that the adsorption of Harmal molecules onto the steel surface followed Langmuir isotherm. Fourier-transform infrared spectroscopy FTIR was used to determine the electron-rich functional groups in Harmal extract, which contribute to corrosion inhibition effect. Scanning electron microscopy SEM measurement of a steel surface clearly proves the anticorrosion effect of Harmal leaves.

Welding fumes induce lung toxicity and are carcinogenic to humans but the molecular mechanisms have yet to be clarified. The aim of this study was to evaluate the toxicity of stainless and mild steel particles generated via gas-metal arc welding using primary human small airway epithelial cells (hSAEC) and ToxTracker reporter murine stem cells, which track activation of six cancer-related pathways. Metal content (Fe, Mn, Ni, Cr) of the particles was relatively homogenous across particle size. The particles were not cytotoxic in reporter stem cells but stainless steel particles activated the Nrf2-dependent oxidative stress pathway. In hSAEC, both particle types induced time- and dose-dependent cytotoxicity, and stainless steel particles also increased generation of reactive oxygen species. The cellular metal content was higher for hSAEC compared to the reporter stem cells exposed to the same nominal dose. This was, in part, related to differences in particle agglomeration/sedimentation in the different cell media. Overall, our study showed differences in cytotoxicity and activation of cancer-related pathways between stainless and mild steel welding particles. Moreover, our data emphasizes the need for careful assessment of the cellular dose when comparing studies using different in vitro models., (© 2021. The Author(s).)

One of the main challenges faced by microbial fuel cells (MFCs) generating voltage is how to facilitate the oxygen reduction reaction (ORR) process using a specifically designed air cathode, especially by optimizing a three-phase catalytic interface and enhanced O 2 diffusion on it. Herein, a three-dimensional porous N -doped graphene aerogel (NGA) is polymerized onto a steel mesh (SM) to construct a simple structure of an air cathode (NGA-x/SM) via hydrothermal synthesis and subsequent freeze-drying treatment; more specifically, NGA was simultaneously used as an efficient ORR catalyst layer and breathable gas diffusion layer to improve the performance of MFCs. In this system, the NGA-5/SM (with a precursor concentration of x = 5.0 mg mL -1 ) makes itself a perfect candidate to be used as an air cathode. Characterization parameters reveal that sub-micrometer micropores, defective multilayer structures, and the highest proportion of pyridinic-N (48.1%) exist in NGA-5/SM. Furthermore, electrochemical measurements demonstrate that it has an oxygen reduction peak potential of 0.63 V, a Tafel slope of 187 mV dec -1 , and closest 4e - transfer pathway ( n = 3.2-3.5). These data prove that a three-phase boundary can naturally form in NGA-5/SM, where the ORR occurs. More importantly, this work provides a proof of concept that a Pt-free air cathode could be prepared with high-efficiency NGA by a two-step preparation method to achieve a MFC maximum power density of 1593 mW m -2 .

The development of environmentally friendly and sustainable corrosion protection technologies is a longstanding yet difficult problem, especially for the marine environment. The utilization of living biofilms isolated from local environments is an effective strategy for infrastructure protection. In this study, three aerobic marine bacteria, Tenacibaculum mesophilum D-6, Tenacibaculum litoreum W-4, and Bacillus sp. Y-6, with strong biofilm-forming abilities were isolated and evaluated for the corrosion protection of X80 carbon steel. The corrosion inhibitory effect of the bacteria was found to be closely related to their biofilm-forming abilities. This conclusion was corroborated by biofilm characterization, electrochemical tests, weight loss analysis, and corrosion product analysis. Moreover, secreted extracellular polymeric substances were identified to play significant roles in corrosion inhibition. Herein, we proposed a novel, eco-friendly, and cost-effective method for corrosion protection of carbon steels in the marine environment, providing guiding principles for identifying corrosion inhibitory bacteria from the local marine environment.

Microbiologically influenced corrosion (MIC) is one of the reasons leading to the service failure of pipelines buried in the soil. The effects of sulfate-reducing bacteria (SRB) on steel corrosion without organic carbon are not clear. In this work, SRB cells were enriched in the simulated soil solution, aiming to study SRB corrosion behavior without organic carbon source using weight loss, electrochemical measurements, and surface analysis. Effects of DO on SRB corrosion were also studied. Results indicate that SRB can survive after 14 days of incubation without organic carbon source, but approximately 90% SRB have died. SRB without organic carbon source could inhibit the uniform corrosion but enhance the pitting corrosion compared with the control specimen. The corrosion rate of the control calculated from weight loss is highest with a value of (0.081 ± 0.013) mm/y. The highest localized corrosion rate of (0.306 ± 0.006) mm/y is obtained with an initial SRB count of 10 7 cells/mL. The presence of DO influences the steel corrosion process. Oxygen corrosion dominates for the specimens in the absence and presence of SRB with an initial count of 10 3 cells/mL, while SRB MIC is primary for the specimens with high SRB counts., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Halomonas titanicae accelerated steel corrosion by dissimilatory Fe(III) reduction under anaerobic environments, and their adhesion was the key to achieving extracellular electron transfer between cells and Fe(III). This work investigated the inhibition effects of Cu and Ni alloying elements on corrosion of high strength low alloy (HSLA) steel affected by H. titanicae. It was found that both the addition of Cu (1.3%) and high content of Ni (7.2%) brought better corrosion resistance than the steel containing 4.8% Ni via decreasing the amount of sessile bacterial cells. And the inhibition efficiency of Cu with the lower content was stronger than that of Ni with the higher content. Biofilm inhibition mechanisms varied from Cu to Ni alloying elements, and the former was achieved via bactericidal Cu ions released from steel. While for the HSLA steel with high Ni content, the formation of nickel oxides including NiFe 2 O 4 and Ni(OH) 2 refined the grains of corrosion products and decreased the bacterial attachment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

Andrographolide, a bioactive naturally occurring labdane diterpenoid with outstanding antioxidant effects in medicine, has been isolated and purified from Andrographis paniculata, and applied in acid-chloride environments for the corrosion protection of carbon steel. Upon isolation, the phytochemical was identified by NMR and FTIR, while its corrosion inhibition evaluation was achieved by combined electrochemical and gravimetric experiments. The adsorption of andrographolide on carbon steel was examined by SEM, FTIR, and 3D surface measurement, and computational studies were used to describe the adsorption characteristics and properties. The experimental measurements revealed that andrographolide is an effective mixed-type corrosion inhibitor whose efficiency was dependent on both its concentration and the temperature of the environment, with maximum inhibition efficiency of 92.4% recorded for 2.0 g/L andrographolide after 48 h at 318 K. The adsorption of andrographolide and its anticorrosion capacity on carbon steel surface was confirmed by the employed surface analytical techniques, while molecular electrostatic potential, conceptual density functional theory, and molecular dynamics simulation predicted the quantum chemical details and binding properties of the phytochemical on Fe (110) surface at different temperatures., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this study, changes in the electrochemical conditions of oil fields caused by biofilms with sulfate-reducing bacteria have been studied as they promote localized pitting damage, reservoir souring problems, and many other processes including well plugging that lead to increased production costs. Biofilm formation and its effects on 1020 carbon steel surfaces were evaluated in a discontinuous electrochemical reactor by using a bacterial consortium isolated from the injection water of a Colombian oil field. Sulfide concentration and pH values were observed to decrease, which was consistent with the exponential planktonic sulfate-reducing bacterial growth. The formation of a biofilm that adheres to a porous layer of corrosion products was identified using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The morphology of the films revealed the presence of the biofilm and corrosion product crystals. Open circuit potential presented a negative shift in the potential during the first 24 h in a biotic cell. Electrochemical impedance spectroscopy showed a change in the behavior of the resistive zone for both systems, a charge transfer trend in the abiotic cell, and a transformation of the charge transfer process to a diffusive process in the biotic cell after 48 h. The polarization resistance showed its lowest resistivity 74.95 Ω·cm -2 during the first 48 h, while the corrosion rate was estimated as 3.37 mpy. This research contributes to the understanding of corrosion mechanisms in the metal-solution interface via detailed monitoring of biofilm growth., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The reinforced concrete-filled steel tube (RCFST) column solves several of the problems of the concrete-filled steel tube (CFST) column in practical engineering applications. Moreover, RCFST has a simple joint structure, high bearing capacity, good ductility, and superior fire resistance. From a structural safety perspective, designers prioritize the creep performance of CFST members in structural design. Therefore, the creep behavior of RCFST columns should be thoroughly investigated in practical engineering design. To study the influence of the creep behavior of RCFST columns under axial compression, this work analyzed the mechanical behavior of composite columns based on their mechanical characteristics under axial compression and established a creep formula suitable for RCFST columns under axial compression. A creep analysis program was also developed to obtain the creep strain-time curve, and its correctness was verified by existing tests. On this basis, the effects of the main design parameters, such as the stress level, steel ratio, and reinforcement ratio, on the creep behavior were determined and analyzed. The creep of the tested composite columns increased rapidly in the early stages (28 days) of load action; the growth rate was relatively low after 28 days and tended to stabilize after approximately six months. The stress level had the greatest influence on the creep of RCFST columns under axial compression, followed by the steel ratio. The influence of the reinforcement ratio on the creep behavior was less. The results of this study can provide a reference for engineering practice., Competing Interests: The authors have declared that no competing interests exist.

Microbiologically influenced corrosion (MIC) is one of the major corrosion threats in the oil and gas industry. It is caused by environmental biofilms. Glutaraldehyde is a popular green biocide for mitigating biofilms and MIC. This work investigated the efficacy of glutaraldehyde enhancement by food-grade green chemical D-limonene in the biofilm prevention and MIC mitigation using a mixed-culture oilfield biofilm consortium. After 7 days of incubation at 37 °C in enriched artificial seawater in 125 mL anaerobic vials, the 100 ppm (w/w) glutaraldehyde + 200 ppm D-limonene combination treatment reduced the sessile cell counts on C1018 carbon steel coupons by 2.1-log, 1.7-log, and 2.3-log for sulfate reducing bacteria, acid producing bacteria, and general heterotrophic bacteria, respectively in comparison with the untreated control. The treatment achieved 68% weight loss reduction and 78% pit depth reduction. The 100 ppm glutaraldehyde + 200 ppm D-limonene combination treatment was found more effective in biofilm prevention and MIC mitigation than glutaraldehyde and D-limonene used individually. Electrochemical tests corroborated weight loss and pit depth data trends., (© 2021. The Author(s), under exclusive licence to Springer Nature B.V.)

This study presents a process for preparation of cellulose-lignin barrier coatings for hot-dip galvanized (HDG) steel by aqueous electrophoretic deposition. Initially, a solution of softwood kraft lignin and diethylene glycol monobutyl ether was used to prepare an aqueous dispersion of colloidal lignin particles (CLPs) via solvent exchange. Analysis of the dispersion showed that it comprised submicron particles ( D = 146 nm) with spherical morphologies and colloidal stability (ζ-potential = -40 mV). Following successful formation, the CLP dispersion was mixed with a suspension of TEMPO-oxidized cellulose nanofibers (TOCN, 1 and 2 g·L -1 ) at a fixed volumetric ratio (1:1, TOCN-CLPs), and biopolymers were deposited onto HDG steel surfaces at different potentials (0.5 and 3 V). The effects of these variables on coating formation, dry adhesion, and electrochemical properties (3.5% NaCl) were investigated. The scanning electron microscopy results showed that coalescence of CLPs occurs during the drying of composite coatings, resulting in formation of a barrier layer on HDG steel. The scanning vibrating electrode technique results demonstrated that the TOCN-CLP layers reduced the penetration of the electrolyte (3.5% NaCl) to the metal-coating interface for at least 48 h of immersion, with a more prolonged barrier performance for 3 V-deposited coatings. Additional electrochemical impedance spectroscopy studies showed that all four coatings provided increased levels of charge transfer resistance ( R ct )-compared to bare HDG steel-although coatings deposited at a higher potential (3 V) and a higher TOCN concentration provided the maximum charge transfer resistance after 15 days of immersion (13.7 cf. 0.2 kΩ·cm 2 for HDG steel). Overall, these results highlight the potential of TOCN-CLP biopolymeric composites as a basis for sustainable corrosion protection coatings.

Steel slag is being used worldwide for a variety of applications, among which is underwater dyke reinforcement. In the present study the leaching and bioaccumulation of 18 inorganic compounds from basic oxygen furnace (BOF) steel slag were monitored in marine experimental ecosystems (mesocosms) for 12 wk. Triplicate mesocosms were installed at 2 refreshment rates, one reflecting the situation in the Oosterschelde estuary where BOF steel slag was applied and the other at a 35 times lower rate. Vanadium in both water and biota turned out to be the best tracer for the presence of BOF steel slag in the mesocosms. The mesocosm data helped to interpret the results of a 4-yr field sampling program in the Oosterschelde estuary where no elevated levels of vanadium in water or biota were found near locations where steel slag was applied. Also, no ecological impact could be established in the field, which was in line with the observations in the mesocosms. The present study shows the added value of a tailor-made mesocosm study for realistic risk assessment and provides support for applying this tool as a basis for designing efficient field monitoring programs. Environ Toxicol Chem 2021;40:2499-2509. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC., (© 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.)

Chemical biocides remain the most effective mitigation strategy against microbiologically influenced corrosion (MIC), one of the costliest and most pervasive forms of corrosion in industry. However, toxicity and environmental concerns associated with these compounds are encouraging the development of more environmentally friendly MIC inhibitors. In this study, we evaluated the antimicrobial effect of a novel, multi-functional organic corrosion inhibitor (OCI) compound, cetrimonium trans-4-hydroxy-cinnamate (CTA-4OHcinn). Attachment of three bacterial strains, Shewanella chilikensis, Pseudomonas balearica and Klebsiella pneumoniae was evaluated on wet-ground (120 grit finish) and pre-oxidised carbon steel surfaces (AISI 1030), in the presence and absence of the new OCI compound. Our study revealed that all strains preferentially attached to pre-oxidised surfaces as indicated by confocal laser scanning microscopy, scanning electron microscopy and standard colony forming unit (CFU) quantification assays. The inhibitor compound at 10 mM demonstrated 100% reduction in S. chilikensis attachment independent of initial surface condition, while the other two strains were reduced by at least 99.7% of the original viable cell number. Our results demonstrate that CTA-4OHcinn is biocidal active and has promise as a multifunctional, environmentally sound MIC inhibitor for industrial applications., (© 2021. The Author(s).)

The corrosion behavior of EH40 steel in seawater enriched with Methanococcus maripaludis was investigated through electrochemical methods and surface analysis techniques. The results revealed that the hydrogenotrophic M. maripaludis strain can utilize acetate as an alternative energy source. Corrosion of EH40 steel is initially inhibited, but prolonged exposure with the methanogen leads to an eventual corrosion propagation. During the early stage of immersion in M. maripaludis culture medium, the formation of a protective corrosion products film inhibits EH40 steel corrosion. The presence of M. maripaludis promotes both anodic and cathodic reactions of EH40 steel in the late stage of exposure. Surface analyses revealed that pitting corrosion is closely related to uneven distribution of M. maripaludis biofilm on EH40 steel surface., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A novel and eco-friendly chitosan derivative was synthesized as green corrosion inhibitors on C3003 aluminum alloy in 3.5 wt.% NaCl solution. In this paper, CP was prepared by Schiff Base reaction with chitosan and 4-pyridinecarboxaldehyde. Then, TiO 2 was dispersed in CP to prepare CPT nanocomposite. The corrosion inhibition effect of CPT on C3003 aluminum alloy at different concentrations were studied with electrochemical techniques and surface analysis. The results showed that the maximum inhibition efficiency of CPT nanocomposite reaches to 94.5 % at 200 ppm after the immersed in 3.5 wt.% NaCl solution for 72 h. Meanwhile, the contact angle increases to 120° due to the formation of hydrophobic substances. The strategy of organic/inorganic hybrid can provide the inspiration for the development of chitosan corrosion inhibitor with low concentration and high efficiency., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The influence of NaCl concentration on microbiologically influenced corrosion (MIC) of Q235 carbon steel by the halophilic archaeon Natronorubrum tibetense was investigated by immersion tests and electrochemical measurements. An increase in NaCl concentration from 0 g/mL to 0.1 g/mL promoted the anodic dissolution of carbon steel and accelerated its corrosion, but MIC did not occur. A further increase in NaCl concentration to 0.2 g/mL led to MIC in inoculated medium, and the occurrence of the MIC resulted in further aggravation of carbon steel corrosion. Once the NaCl concentration reached 0.3 g/mL, the high concentration of chloride ions greatly interfered with the adsorption of dissolved oxygen and the attachment of N. tibetense cells to the surface of carbon steel, thus reducing the corrosion rate of carbon steel and inhibiting the MIC., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

SRB is one of the main bacteria causing marine microbial corrosion. In order to reduce the loss of microbial corrosion, a Gemini surfactant (12-B-12) containing semi-rigid spacer was used to investigate the anti-bacterial and anti-corrosion performances of carbon steel in simulated seawater by weight-loss test, electrochemical method and surface morphology analysis. The results showed that the inhibition efficiency of 0.01 mM 12-B-12 was as high as 98.3% after 30 days of incubation in simulated seawater with SRB, and the planktonic and sessile SRB on the carbon steel surface can be reduced to undetectable level. Quantum chemical calculation and molecular dynamics simulation were used to study the structure-activity relationship., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Microbially influenced corrosion (MIC) may contribute significantly to overall corrosion risks, especially in the gas and petroleum industries. In this study, we isolated four Prolixibacter strains, which belong to the phylum Bacteroidetes, and examined their nitrate respiration- and Fe 0 -corroding activities, together with two previously isolated Prolixibacter strains. Four of the six Prolixibacter strains reduced nitrate under anaerobic conditions, while the other two strains did not. The anaerobic growth of the four nitrate-reducing strains was enhanced by nitrate, which was not observed in the two strains unable to reduce nitrate. When the nitrate-reducing strains were grown anaerobically in the presence of Fe 0 or carbon steel, the corrosion of the materials was enhanced by more than 20-fold compared to that in aseptic controls. This enhancement was not observed in cultures of the strains unable to reduce nitrate. The oxidation of Fe 0 in the anaerobic cultures of nitrate-reducing strains occurred concomitantly with the formation of nitrite. Since nitrite chemically oxidized Fe 0 under anaerobic and aseptic conditions, the corrosion of Fe 0 - and carbon steel by the nitrate-reducing Prolixibacter strains was deduced to be mainly enhanced via the biological reduction of nitrate to nitrite, followed by the chemical oxidation of Fe 0 to Fe 2+ and Fe 3+ coupled to the reduction of nitrite., (© 2021 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.)

Pull-out testing was carried out to evaluate the effects of shape, size and concentration of steel aggregates on anchorage performance. Steel grit with particle sizes of 1.5, 2.0, and 2.8 mm and steel shot diameters of 1.4, 2.0, and 2.5 mm were used as steel aggregates and were added into the resin anchoring agent. For each kind of steel aggregate, either 30, 40 or 50 aggregates were used to evaluate the effects of different steel aggregate densities. Anchorage specimens were prepared using ϕ20mm rebar bolts and steel sleeves. Compressive and shear strengths of resin containing steel aggregates, the pullout curve, and the circumferential strain of the sleeves were measured, and the energy consumption was calculated. Results show that compressive and shear strengths of resin containing steel grit and steel shot are increased by 8.4%-17.0% compared to pure resin. For the aggregate numbers of 30, 40 and 50, the anchoring force is increased by 7.9%, 7.5% and 6.5%; energy consumption is increased by 19.2%, 15.0% and 18.6%; and the circumferential strain of the specimen is increased by 28.4%, 25.1% and 39.5%, respectively. The effect of aggregate size on anchoring performance is significant; that is, the aggregate sizes of 1.4~1.5, 2.0 and 2.5~2.8 mm increase the anchoring force, energy consumption and sleeve circumferential strain by 8.5%, 4.6% and 8.7%, 16.0%, 8.4% and 28.4%, and 17.9%, 23.3% and 51.9%, respectively. The relationships of the anchoring force, energy consumption, and circumferential strain with steel aggregate quantity and size are formulated. Results show that the addition of steel aggregates increases the compressive and shear strengths of the resin, and steel aggregate quantity and size have significant impact on anchoring performance. This paper provides the basis for optimization of resin anchoring agents used in the mining industry. The impact of anchoring agent shear strength and residual shear strength on the anchoring effect were also discussed based on the failure analysis of the anchoring section., Competing Interests: The authors have declared that no competing interests exist.

In the present investigation, biocorrosion inhibition efficiency of Syzygium aromaticum (clove) aqueous extract on carbon steel in presence of four corrosion causing bacterial strains (Bacillus subtilis, Streptomyces parvus, Pseudomonas stutzeri, and Acinetobacter baumannii) was explored. Weight loss, potentiodynamic polarization, and AC impedance studies were carried out with and without bacterial strains and clove extract. The results obtained from weight loss and AC impedance studies indicate that these corrosion causing bacterial strains accelerated the biocorrosion reaction and biofilm playing a key role in this process. However, the addition of clove extract into the corrosive medium decreased the corrosion current and increased the solution and charge transfer resistance. The significant inhibition efficiency of about 87% was archived in the mixed consortia system with clove extract. The bioactive compounds were playing an important role in the antibacterial activity of the clove extract. It was revealed that clove extract has both biocidal and corrosion inhibition properties.

In this paper, the heat transfer characteristics of the forced air quenching with non-isothermal and non-uniform oxidation are investigated. By introducing the variations of interfacial temperature and oxygen partial pressure, a three-layered non-isothermal high-temperature oxidation kinetic model is developed, in which a discrete-time modeling method is employed to solve the problem of integration of the transient terms, and a special interfacial grid treatment is used for considering the growth of each oxide layer and updating of the thermal properties. Moreover, a parameter identification method using the multi-objective genetic algorithm is proposed for the inverse solution of the oxidation parabolic parameters based on the measured scale thicknesses in oxidation experiment. A case study of the forced air quenching of a Q235 disk is presented to validate the availability of the developed formulas. Then the interfacial heat transfer characteristics are analyzed, while the numerical solutions with and without oxidation are both performed for in-depth comparison. Results indicate that the active quenching region is mainly centralized in the vicinity of stagnation region. The radial variation regularity of the temperature difference across the total oxide layer is mainly determined by the thermal conductivity and the scale thickness. The existence of the oxide scale actually produces a certain thermal resistance during the quenching process and the effects of the oxide scale increases with the radial coordinate due to the interfacial temperature distribution. The results obtained can provide theoretical derivation for precise control of the internal phase transformation during the forced air quenching process., Competing Interests: The authors have declared that no competing interests exist.

This study aimed to examine the extract of barks of Tamarix aphylla as a corrosion inhibitor. The methodology briefly includes plant sample collection, extraction of the corrosion inhibitor, gravimetric analysis, plotting potentiodynamic polarization plots, electrochemical impedance spectroscopic measurements, optimization of conditions, and preparation of the inhibitor products. The results show that the values of inhibition efficiency (IE%) increased as the concentrations of the inhibitor increased, with a maximum achievable inhibition efficiency of 85.0%. Potentiodynamic polarization (PP) tests revealed that the extract acts as a dual-type inhibitor. The results obtained from electrochemical impedance spectroscopy (EIS) measurements indicate an increase in polarisation resistance, confirming the inhibitive capacity of the tested inhibitor. The adsorption of the inhibitor on the steel surface follows the Langmuir adsorption isotherm model and involves competitive physio-sorption and chemisorption mechanisms. The EIS technique was utilized to investigate the effect of temperature on corrosion inhibition within the 298-328 K temperature range. Results confirm that the inhibition efficiency (IE%) of the inhibitor decreased slightly as the temperature increased. Lastly, the thermodynamic parameters for the inhibitor were calculated.

Extracts from plant materials have great potential as alternatives to inorganic corrosion inhibitors, which typically have harmful consequences. Experimental and theoretical methodologies studied the effectiveness of agricultural waste, namely, date palm seed extract as a green anti-corrosive agent in 0.5 M hydrochloric acid. Experimental results showed that immersion time and temperature are closely related to the effectivity of date palm seed as a corrosion inhibitor. The inhibition efficiency reduced from 95% to 91% at 1400 ppm when the immersion time was increased from 72 h to 168 h. The experimental results also indicated that the inhibition efficiency decreased as the temperature increased. The presence of a protective layer of organic matter was corroborated by scanning electron microscopy. The adsorption studies indicated that date palm seed obeyed Langmuir adsorption isotherm on the carbon steel surface, and Gibbs free energy values were in the range of -33.45 to -38.41 kJ·mol -1 . These results suggested that the date palm seed molecules interacted with the carbon steel surface through mixture adsorption. Theoretical calculations using density functional theory showed that the capability to donate and accept electrons between the alloy surface and the date palm seed inhibitor molecules is critical for adsorption effectiveness. The HOMO and LUMO result indicated that the carboxyl (COOH) group and C=C bond were the most active sites for the electron donation-acceptance type of interaction and most auxiliary to the adsorption process over the Fe surface.

Euterpe oleracea Mart. (Arecaceae) is an endogenous palm tree from the Amazon region. Its seeds correspond to 85% of the fruit's weight, a primary solid residue generated from pulp production, the accumulation of which represents a potential source of pollution and environmental problems. As such, this work aimed to quantify and determine the phytochemical composition of E. oleracea Mart. seeds from purple, white, and BRS-Pará açaí varieties using established analytical methods and also to evaluate it as an eco-friendly corrosion inhibitor. The proanthocyanidin quantification ( n -butanol/hydrochloric acid assay) between varieties was 6.4-22.4 ( w / w )/dry matter. Extract characterization showed that all varieties are composed of B-type procyanidin with a high mean degree of polymerization (mDP ≥ 10) by different analytical methodologies to ensure the results. The purple açaí extract, which presented 22.4% ( w / w ) proanthocyanidins/dry matter, was tested against corrosion of carbon steel AISI 1020 in neutral pH. The crude extract (1.0 g/L) was effective in controlling corrosion on the metal surface for 24 h. Our results demonstrated that the extracts rich in polymeric procyanidins obtained from industrial açaí waste could be used to inhibit carbon steel AISI 1020 in neutral pH as an abundant, inexpensive, and green source of corrosion inhibitor.

The adsorption and inhibition mechanism of chain length increase and group substitution of imidazole tetrafluoroborate derivatives for the corrosion inhibition of carbon steel in HCl solution was revealed in detail via the density functional theory, molecular dynamics (MD) simulation, and quantitative structure-activity relationship (QSAR) methods. The main reactive site of an ionic liquid is located on its imidazolium ring. With alkyl chain lengthening or the introduction of methyl groups onto the imidazolium ring, its molecular reactivity and electron-donating ability increase the interaction between the ionic liquid and the Fe (110) surface. Therefore, the imidazolium rings of four IL inhibitors are more likely to lie on the Fe (110) surface in parallel through chemical adsorption. The interactions between N atoms in ionic liquids and the Fe (110) surface are stronger than those between the C atoms on the imidazolium rings of the four ionic liquid, and coordination bonds can be formed between N atoms and the Fe (110) surface. Therefore, ionic liquids can hinder the interaction between corrosion particles and the Fe (110) surface, hinder the diffusion of corrosion particles, and effectively reduce the number density of corrosion particles on the Fe (110) surface. A methyl substituent on the C2 atom of the imidazolium ring can enhance the electron-donating ability and adsorption tendency much more than an increase in the alkyl chain on the N3 atom. The four inhibitors are ordered in terms of corrosion inhibition efficiency as [C 12 DMIM]BF 4  > [C 10 DMIM]BF 4  > [C 12 MIM]BF 4  > [C 10 MIM]BF 4 , which agrees well with the experimental results. A good correlation between experimental inhibition efficiency, concentration and microscopic structures parameters of ILs such as energy gap ΔE, polarizability P, electronegativity χ, hardness η, softness σ, number of electrons transferred ΔN, and electrophilicity ω was achieved.

Nickel-free, high-nitrogen austenitic steels (AHNS) have been introduced for biomedical applications, with encouraging results in terms of mechanical and corrosion properties. Here, we tested the corrosion resistance of a nickel-free high nitrogen steel (FeCrMnMoN0.9) in bovine serum solutions containing 0 or 3 g/L hyaluronic acid (HA), and 0, 3, or 30 mM hydrogen peroxide (H 2 O 2 ) simulating no, moderate, or strong inflammatory conditions, respectively. Nondestructive electrochemical measurements (open circuit potential [OCP], linear polarization resistance "R P ", and electrochemical impedance spectroscopy) were run in triplicate over 10 hr. The presence of HA had no significant effect either on the stabilized OCP values, or on the corrosion resistance of FeCrMnMoN0.9. Increasing H 2 O 2 concentrations shifted the OCP to more electropositive values; the corrosion resistance decreased only at a 30 mM H 2 O 2 . Final R P values at 0, 3, and 30 mM H 2 O 2 resulted in 1598 ± 276, 1746 ± 308, and 439 ± 47 kΩ cm 2 , respectively. These values were 4-14 times higher, than the R P values measured on LC-CoCrMo in our previous study, conducted under identical conditions. While these findings are encouraging, future studies need to focus on tribocorrosive properties of the AHNS to evaluate its applicability in joint replacement., (© 2020 Wiley Periodicals LLC.)

Microbiocides are used to control problematic microorganisms. High doses of microbiocides cause environmental and operational problems. Therefore, using microbiocide enhancers to make microbiocides more efficacious is highly desirable. 2,2-dibromo-3-nitrilopropionamide (DBNPA) is a popular biodegradable microbiocide. D-Amino acids have been used in lab tests to enhance microbiocides to treat microbial biofilms. In this investigation, D-tyrosine was used to enhance DBNPA against Desulfovibrio vulgaris biofilm on C1018 carbon steel. After 7 days of incubation, the mass loss of coupons without treatment chemicals in the ATCC 1249 culture medium was found to be 3.1 ± 0.1 mg/cm 2 . With 150 ppm (w/w) DBNPA in the culture medium, the mass loss was reduced to 1.9 ± 0.1 mg/cm 2 accompanied by a 1-log reduction in the sessile cell count. The 150 ppm DBNPA + 1 ppm D-tyrosine combination attained an extra 3-log reduction in sessile cell count and an additional 30% reduction in mass loss compared with 150 ppm DBNPA only treatment. The combination also led to a smaller maximum pit depth. Linear polarization resistance (LPR), electrochemical impedance spectrometry (EIS), and potentiodynamic polarization (PDP) tests corroborated the enhancement effects.

Disodium ethylenediaminetetraacetate salt is known for its excellent coordinating properties with the metal ions. The present study deals with the investigation of the prepared Disodium EDTA functionalized chitosan in corrosion inhibition for mild steel in 1 M HCl. The modified chitosan was characterized by spectral studies, thermal analysis, and Zeta potential studies. The corrosion inhibition efficiency (%) was evaluated using the gravimetric method and electrochemical studies. The electrochemical studies included potentiodynamic polarization, linear polarization resistance, and electrochemical impedance methods. The modified chitosan polymer showed an inhibition efficiency of 96.63% for 500 ppm at 303 K. Adsorption process obeyed Langmuir isotherm. Experimental results and theoretical calculations endorsed initial physisorption followed by a chemisorption process. Surface characterization studies supported the formation of a protective film that enabled the inhibition process. Density functional theory, Monte Carlo studies, and molecular dynamics simulation studies show a good agreement with the experimental results. Two-way Analysis of Variance was performed to test the influence of immersion period and inhibitor concentration on the corrosion rate using the statistical software IBM SPSS 20.0. A quartic model was generated as the best fit with the highest R2 value of 0.973. Design Expert software was employed for statistical modeling fit., (Copyright © 2021. Published by Elsevier B.V.)

The objective of this study was to compare the potential of mono-rhamnolipids (mono-RML) and di-rhamnolipids (di-RML) against biofilm formation on carbon steel coupons submitted to oil produced water for 14 days. The antibiofilm effect of the RML on the coupons was analyzed by scanning electron microscopy (SEM) and by epifluorescence microscopy, and the contact angle was measured using a goniometer. SEM analysis results showed that all RML congeners had effective antibiofilm action, as well as preliminary anticorrosion evaluation confirmed that all RML congeners prevented the metal deterioration. In more detail, epifluorescence microscopy showed that mono-RML were the most efficient congeners in preventing microorganism's adherence on the carbon steel metal. Image analyses indicate the presence of 15.9%, 3.4%, and <0.1% of viable particles in di-RML, mono/di-RML and mono-RML pretreatments, respectively, in comparison to control samples. Contact angle results showed that the crude carbon steel coupon presented hydrophobic character favoring hydrophobic molecules adhesion. We calculated the theoretical polarity of the RML congeners and verified that mono-RML (log P = 3.63) presented the most hydrophobic character. This had perfect correspondence to contact angle results, since mono-RML conditioning (58.2°) more significantly changed the contact angle compared with the conditioning with one of the most common surfactants used on oil industry (29.4°). Based on the results, it was concluded that rhamnolipids are efficient molecules to be used to avoid biofilm on carbon steel metal when submitted to oil produced water and that a higher proportion of mono-rhamnolipids is more indicated for this application., (© 2021 American Institute of Chemical Engineers.)

In this paper, an extensive simulation program is conducted to find out the optimal ANN model to predict the shear strength of fiber-reinforced polymer (FRP) concrete beams containing both flexural and shear reinforcements. For acquiring this purpose, an experimental database containing 125 samples is collected from the literature and used to find the best architecture of ANN. In this database, the input variables consist of 9 inputs, such as the ratio of the beam width, the effective depth, the shear span to the effective depth, the compressive strength of concrete, the longitudinal FRP reinforcement ratio, the modulus of elasticity of longitudinal FRP reinforcement, the FRP shear reinforcement ratio, the tensile strength of FRP shear reinforcement, the modulus of elasticity of FRP shear reinforcement. Thereafter, the selection of the appropriate architecture of ANN model is performed and evaluated by common statistical measurements. The results show that the optimal ANN model is a highly efficient predictor of the shear strength of FRP concrete beams with a maximum R2 value of 0.9634 on the training part and an R2 of 0.9577 on the testing part, using the best architecture. In addition, a sensitivity analysis using the optimal ANN model over 500 Monte Carlo simulations is performed to interpret the influence of reinforcement type on the stability and accuracy of ANN model in predicting shear strength. The results of this investigation could facilitate and enhance the use of ANN model in different real-world problems in the field of civil engineering., Competing Interests: The authors have declared that no competing interests exist.

The plastic hinge is a key factor in the ductile and plastic design of structures and an important basis for the seismic strengthening of structures. The formation and behavior of plastic hinges is critical for the seismic performance of an entire structure. The relocation of plastic hinges away from the beam end is an effective way of addressing brittle failure. In this paper, the cause of the shear buckling failure of prefabricated steel beams with corrugated webs and the strain variation at the flanges of steel beams are theoretically analyzed through structural tests. Based on the analysis results, a local strengthening method is proposed, and the effects of the beam sizes and the strengthening steel plate on the plastic hinges are obtained. In addition, a calculation method for determining the size of the strengthening steel plate that promotes the relocation of the plastic zone away from the beam end is given, a design method for plastic hinge relocation is proposed based on the test data, and its validity is verified., Competing Interests: The authors have declared that no competing interests exist.

To improve the environmental efficiency of the reverse filling system, three strategies aim to optimize the packing density, and the mechanical property were adopted in this study. Based on the compressive packing model (CPM), the relationship between the D50 ratio and maximum theoretical packing density for a reverse filling system with 25% and 30% superfine Portland cement was established. For comparison, silica fume and steel fiber were also added to the reverse filling system, respectively. The improvement of packing density by adjusting the D50 ratio was verified through the minimum water demand method, CPM, and modified Andreasen and Andersen (MAA) model. Compared to the reverse filling system added with 3 wt % silica fume, which possesses a comparable mechanical property with the optimized group (adjusted D50 ratio), the incorporation of steel fiber shows a more significant increase. The environmental efficiency of all the samples was quantified into five aspects through the calculation based on the mix proportion, compressive strength, and hydration degree. The comprehensive evaluation demonstrated that the optimized reverse filling system exerts a lower environmental impact and possesses a much higher cement use efficiency compared to the majority of ultra-high performance concrete (UHPC)/ ultra-high performance fiber-reinforced concrete (UHPFRC) reported in published papers.

The process of microbiologically influenced corrosion (MIC) in soils has received widespread attention. Herein, long-term outdoor soil burial experiments were conducted to elucidate the community composition and functional interaction of soil microorganisms associated with metal corrosion. The results indicated that iron-oxidizing (e.g., Gallionella), nitrifying (e.g., Nitrospira), and denitrifying (e.g., Hydrogenophaga) microorganisms were significantly enriched in response to metal corrosion and were positively correlated with the metal mass loss. Corrosion process may promote the preferential growth of the abundant microbes. The functional annotation revealed that the metabolic processes of nitrogen cycling and electron transfer pathways were strengthened, and also that the corrosion of metals in soil was closely associated with the biogeochemical cycling of iron and nitrogen elements and extracellular electron transfer. Niche disturbance of microbial communities induced by the buried metals facilitated the synergetic effect of the major MIC participants. The co-occurrence network analysis suggested possible niche correlations among corrosion related bioindicators.