Search

The cost-effective implementation of nanofibrillated cellulose (CNF) at industrial scale requires optimizing the quality of the nanofibers according to their final application. Therefore, a portfolio of CNFs with different qualities is necessary, as well as further knowledge about how to obtain each of the main qualities. This paper presents the influence of various production techniques on the morphological characteristics and properties of CNFs produced from a mixture of recycled fibers. Five different pretreatments have been investigated: a mechanical pretreatment (PFI refining), two enzymatic hydrolysis strategies, and TEMPO-mediated oxidation under two different NaClO concentrations. For each pretreatment, five high-pressure homogenization (HPH) conditions have been considered. Our results show that the pretreatment determines the yield and the potential of HPH to enhance fibrillation and, therefore, the final CNF properties. These results enable one to select the most effective production method with the highest yield of produced CNFs from recovered paper for the desired CNF quality in diverse applications. [ABSTRACT FROM AUTHOR]

To extend the application of cost-effective high-yield pulps in packaging, strength and barrier properties are improved by advanced-strength additives or by hot-pressing. The aim of this study is to assess the synergic effects between the two approaches by using nanocellulose as a bulk additive, and by hot-pressing technology. Due to the synergic effect, dry strength increases by 118% while individual improvements are 31% by nanocellulose and 92% by hot-pressing. This effect is higher for mechanical fibrillated cellulose. After hot-pressing, all papers retain more than 22% of their dry strength. Hot-pressing greatly increases the paper's ability to withstand compressive forces applied in short periods of time by 84%, with a further 30% increase due to the synergic effect of the fibrillated nanocellulose. Hot-pressing and the fibrillated cellulose greatly decrease air permeability (80% and 68%, respectively) for refining pretreated samples, due to the increased fiber flexibility, which increase up to 90% using the combined effect. The tear index increases with the addition of nanocellulose, but this effect is lost after hot-pressing. In general, fibrillation degree has a small effect which means that low- cost nanocellulose could be used in hot-pressed papers, providing products with a good strength and barrier capacity. [ABSTRACT FROM AUTHOR]

The widespread use of synthetic plastics in packaging materials poses significant environmental challenges, prompting the search for biobased, biodegradable, and non-toxic alternatives. This study focuses on improving high-yield pulps (HYPs) as sustainable materials for packaging. Enhancing wet strength and barrier properties of papers from bleached chemi-thermomechanical pulps (BCTMPs) is crucial for their application in water- and air- resistant wrappers. Traditional wet strength agents raise environmental and health concerns; therefore, this research explores the use of lignin, in the form of microparticles (LMPs), as a natural biopolymer that offers a safer alternative. However, the low viscosity of LMPs hampers their dispersion as a coating, requiring thickening agents (such as cationic starch (CS), chitosan (CH) or sodium alginate) for an effective coating formulation. Results demonstrate a synergistic effect of LMP coatings with CH or CS, enhanced by hot-pressing at 260 °C for 30 s, which improves dry and wet mechanical properties and decreases air permeability. The use of LMPs as a water-resistant interlayer between BCTMP paper sheets further improves the wet tensile index to 40 kN·m/kg for CH + LMPs and 23 kN·m/kg for CS + LMPs interlayer, representing 55 and 38 % of their respective dry tensile indices., Competing Interests: Declaration of competing interest The authors declare that they do not have competing interests. There are no additional relationships, patents of additional activities to disclose., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The industrial use of TEMPO-mediated oxidation (TMO) reaction to produce highly fibrillated cellulose nanofibrils has been hindered by high catalyst costs, long reaction times and high reaction volumes. The hypothesis that cellulose concentration during TMO process is key to increase the process of efficiency has been confirmed. The novelty of this research is the proof-of-concept for a significant enhancement of the TMO reaction by kneading the cellulose to work in concentrations above 120 g/L. Results show that the increase of the cellulose concentration in the TMO reaction, from the traditional 10 g/L to 120 g/L, increase not only the production for the same reaction volume (1200 %) but also the pulp recovery (up to 94 %). Moreover, the oxidation time can be reduced from 42 min to only 4 min while properties of both the oxidized pulps and the final nanocellulose are similar. On the other hand, the use of buffers in the TMO reaction allows us to keep the pH constant without using NaOH, and to improve the selectivity of the carboxyl groups production. The proposed process also minimizes the final environmental impact., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

This article describes data related to the research paper "Simplification of gel point characterization of cellulose nano and microfiber suspensions" [1]. The characterization of fibrillated celluloses that include cellulose nano and microfibrils (CMNFs) is a challenge for their production on an industrial scale, requiring easy techniques that control their quality and reproducibility. Gel point is a convenient parameter commonly used to estimate the aspect ratio (AR) of CMNFs. However, this estimation requires many sedimentation experiments, which are tedious and time consuming. The dataset includes all information related to the traditional experiments and to the simplified experiments for estimating gel point and AR based on only one sedimentation experiment. The full data set is useful to select the initial concentration to carry out the experimentation. This dataset also includes the information for the validation of the proposed simplified methodology and shows that the errors are lower than 7% for the gel point calculation and of 3% for the AR estimation. A larger databased of nanocellulose suspensions can be built with the reuse of this data to allow the estimation of nanocellulose properties in a future., (© 2023 Published by Elsevier Inc.)

The potential of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy)-mediated oxidation (TMO) to produce cellulose nanofibrils (CNFs) is hindered using costly and environmentally harmful catalysts, limiting its large-scale implementation. To promote sustainability, the TMO medium should be reused but there is a lack of knowledge on this process. The novelty of this research is the identification of the key parameters that affect the recirculation of the TMO medium, and their impact on the quality of the oxidized pulps and CNF products. Contrary to previous hypothesis, results show that the accumulation of salts is not a key parameter; instead, the pulp consistency during oxidation plays a vital role since concentrations higher than 10 g/L led to better CNF quality. Thus, reusing 75 % of the reaction medium, when high pulp consistency is used, does not alter the CNF properties. By reusing the reaction medium up to six times, the catalyst dose is dramatically reduced by >90 % for TEMPO and 80 % for NaBr, compared to the conventional process (0.1 mmol of TEMPO/g and 1 mmol of NaBr/g without medium reuse). Additionally, the high consistency oxidation enables a reduction of >80 % in the reaction time and effluent, and thus a threefold increase in CNF production., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The use of cellulose micro/nanofibrils (CMNFs) as reinforcement paper additive at industrial scale is delayed due to inconsistent results, suggesting a lack of proper consideration of some key parameters. The high influence of fibrillated nanocellulose dispersion has been recently identified as a key parameter for paper bulk reinforcement but it has not been studied for surface coating applications yet. This paper studies the effect of CMNF dispersion degree prior to their addition and during mixing with starch on the reinforcement of paper by coating. Results show that this effect depends on the type of CMNFs since it is related to the surface interactions. For a given formulation, a correlation is observed between the CMNF dispersion and the CMNF/starch mixing agitation with the rheology of the coating formulation which highly affects the paper properties. The optimal dispersion degree is different for each nanocellulose, but the best mechanical properties were always achieved at the lowest viscosity of the coating formulation. In general, the initial state of the nanocellulose 3D network, influences the mixing and smooth application of the coating and affects the reinforcement effect. Therefore, the CMNF industrial implementation in coating formulations will be facilitated by the on-line control of formulations prior to their surface application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The nearby radio galaxy M87 is a prime target for studying black hole accretion and jet formation 1,2 . Event Horizon Telescope observations of M87 in 2017, at a wavelength of 1.3 mm, revealed a ring-like structure, which was interpreted as gravitationally lensed emission around a central black hole 3 . Here we report images of M87 obtained in 2018, at a wavelength of 3.5 mm, showing that the compact radio core is spatially resolved. High-resolution imaging shows a ring-like structure of [Formula: see text] Schwarzschild radii in diameter, approximately 50% larger than that seen at 1.3 mm. The outer edge at 3.5 mm is also larger than that at 1.3 mm. This larger and thicker ring indicates a substantial contribution from the accretion flow with absorption effects, in addition to the gravitationally lensed ring-like emission. The images show that the edge-brightened jet connects to the accretion flow of the black hole. Close to the black hole, the emission profile of the jet-launching region is wider than the expected profile of a black-hole-driven jet, suggesting the possible presence of a wind associated with the accretion flow., (© 2023. The Author(s).)

Vegetable supply in the world is more than double than vegetable intake, which supposes a significant waste of vegetables, in addition to the agricultural residues produced. As sensitive food products, the reasons for this waste vary from the use of only a part of the vegetable due to its different properties to the product appearance and market image. An alternative high-added-value application for these wastes rich in cellulose could be the reduction in size to produce lignocellulose micro- and nanofibrils (LCMNF). In this sense, a direct treatment of greengrocery waste (leek, lettuce, and artichoke) to produce LCMNFs without the extraction of cellulose has been studied, obtaining highly concentrated suspensions, without using chemicals. After drying the wastes, these suspensions were produced by milling and blending at high shear followed by several passes in the high-pressure homogenizer (up to six passes). The presence of more extractives and shorter fiber lengths allowed the obtention of 5-5.5% leek LCMNF suspensions and 3.5-4% lettuce LCMNF suspensions, whereas for artichoke, only suspensions of under 1% were obtained. The main novelty of the work was the obtention of a high concentration of micro- and nanofiber suspension from the total waste without any pretreatment. These high concentrations are not obtained from other raw materials (wood or annual plants) due to the clogging of the homogenizer, requiring the dilution of the sample up to 1% or the use of chemical pretreatments.

The digital transformation of the defence sector is not exempt from innovative requirements and challenges, with the lack of availability of reliable, unbiased and consistent data for training automatisms (machine learning algorithms, decision-making, what-if recreation of operational conditions, support the human understanding of the hybrid operational picture, personnel training/education, etc.) being one of the most relevant gaps. In the context of cyber defence, the state-of-the-art provides a plethora of data network collections that tend to lack presenting the information of all communication layers (physical to application). They are synthetically generated in scenarios far from the singularities of cyber defence operations. None of these data network collections took into consideration usage profiles and specific environments directly related to acquiring a cyber situational awareness, typically missing the relationship between incidents registered at the hardware/software level and their impact on the military mission assets and objectives, which consequently bypasses the entire chain of dependencies between strategic, operational, tactical and technical domains. In order to contribute to the mitigation of these gaps, this paper introduces CYSAS-S3, a novel dataset designed and created as a result of a joint research action that explores the principal needs for datasets by cyber defence centres, resulting in the generation of a collection of samples that correlate the impact of selected Advanced Persistent Threats (APT) with each phase of their cyber kill chain, regarding mission-level operations and goals.

Recycling cycles cause a decrease in mechanical paper properties due to cellulose fiber degradation. The use of cellulose micro/nanofibers (CMF/CNF) to reinforce paper strength has been well studied, although it has been found to have negative effects on drainage. However, the application of CMF/CNF as paper reinforcement is affected by the nanocellulose type. Thus in this study mechanical and chemical treatments in CNF production were compared. Old corrugated container (OCC) pulp used to produce recycled cartonboard was reinforced with 1) CMF from never-dried northern bleached softwood kraft pulp (NBSK) highly refined in a 16-inch low consistency refiner at 1200 rpm and 25 kW of net power; and 2) CNF from NBSK pulp treated by TEMPO-mediated oxidation and homogenization at 600 bars. CMF/CNF and OCC were pulped at the same time and handsheets formed with cationic starch (CS) as retention system. Mechanical, drainage and flocculation properties were evaluated and compared. Data were also compared with other sources of TEMPO CNF. Results show an improvement in mechanical properties, drainage and flocculation when OCC is reinforced with CMF obtained with LCR. Therefore, high fibrillation was not necessary to improve mechanical paper or cardboard properties.

The characterization of nanocellulose fibres (NC) length is a difficult and indirect measurement which relies on aspect ratio calculation and fibre diameter analysis. The aspect ratio can be directly calculated from the gel point, a parameter obtained from sedimentation experiments. The gel point has been used with macroscopic fibres and microfibrillated cellulose, that easily sediment by gravity. However, this methodology has not yield consistent results with highly charged nanofibres nor with fibres with sediment layer difficult to observe. In this study, the gel point methodology is modified: 1) dying the fibres with Crystal Violet to enable the visualization of the fibrils sedimentation line without affecting the fibre network; and 2) by optimizing the sedimentation time to ensure complete settling. The two types of fibrils characterized -low and high fibrillated NC (LF-NC, HF-NC)- behave differently due to the slower sedimentation of HF-NC. The time to reach a stable sedimented layer increases with the level of fibre fibrillation, the charge and the decrease of fibre dimension. Reproducible gel point can be measured after 2 days for LF-NC; however, 8 days are required for HF-NC. The modified methodology was validated by quantifying the influence of pH and salt concentration. As expected, low pHs and the addition of CaCl 2 coagulate HF-NC into flocs which increase the ratio: final over initial fibres height (H s /H o ); this decreases significantly the gel point, as a lower amount of HF-NC are required to interconnect all fibres. This modified method is a valuable tool for the accurate dimensional characterisation of highly charged and low diameter cellulose nanofibres., (Copyright © 2019. Published by Elsevier Ltd.)

Imaging brain oxygenation is crucial for preventing brain lesions in preterm infants. Our aim is to build and validate a near-infrared optical tomography (NIROT) sensor for the head of neonates. This sensor, combined with an optoacoustic device, will enable quantitative monitoring of the structural and functional information of the brain. Since the head of preterm infants is small and fragile great care must be taken to produce a comfortable and compact device in which a sufficient number of light sources and detectors can be implemented. Here we demonstrate our first prototype. Heterogeneous silicone phantoms were produced to validate the prototype's data acquisition, data processing, and image reconstruction. Reconstructed optical properties agree well with the target values. The mechanical performance of the new NIROT sensor prototype confirms its suitability for the clinical application.

Aim: To adapt a questionnaire for assessing the use and abuse of Internet, as well as the relationship between this resource and psychosocial profile in a group of university students., Method: 391 students filled out the questionnaires; 26.1% were men and 73.9% were women, with a mean age of 19.59 years (DT = +/- 2.83; Range: 18-47 years). We used a sociodemographic questionnaire, Social skills questionnaire (Caballo, 1993, EMES-C and EMES-M), Personality questionnaire (E.P.I., Eysenck and Eysenck, 1982), and an Internet and Use and Abuse of Internet questionnaire (adapted from Bruner, 1997, Suler, 1996 and Young, 1996a, Garcia del Castillo y Terol, 2007)., Results: 73.91 % of students connect for an average of 84.81 minutes (DT = +/- 2.05) per week. Except for one subscale of the Internet use and abuse questionnaire, all the subscales showed reliability coefficients > or = . 70 and mean scores lower than the average of the score range. Internet use and abuse showed a relationship with psychosocial variables such as cognitive social skills (r =.14; p =.016) and neuroticism (r =.-13, p =.01).