Search

As the number of observed brown dwarf outflows is growing it is important to investigate how these outflows compare to the well studied jets from young stellar objects. A key point of comparison is the relationship between outflow and accretion activity and in particular the ratio between the mass outflow and accretion rates ($\dot{M}_{out}$/$\dot{M}_{acc}$). The brown dwarf candidate ISO-ChaI 217 was discovered by our group, as part of a spectro-astrometric study of brown dwarfs, to be driving an asymmetric outflow with the blue-shifted lobe having a position angle of $\sim$ 20$^{\circ}$. The aim here is to further investigate the properties of ISO-ChaI 217, the morphology and kinematics of its outflow, and to better constrain ($\dot{M}_{out}$/$\dot{M}_{acc}$). The outflow is spatially resolved in the $[SII]\lambda \lambda 6716,6731$ lines and is detected out to $\sim$ 1\farcs6 in the blue-shifted lobe and ~ 1" in the red-shifted lobe. The asymmetry between the two lobes is confirmed although the velocity asymmetry is less pronounced with respect to our previous study. Using thirteen different accretion tracers we measure log($\dot{M}_{acc}$) [M$_{sun}$/yr]= -10.6 $\pm$ 0.4. As it was not possible to measure the effect of extinction on the ISO-ChaI 217 outflow $\dot{M}_{out}$ was derived for a range of values of A$_{v}$, up to a value of A$_{v}$ = 2.5 mag estimated for the source extinction. The logarithm of the mass outflow ($\dot{M}_{out}$) was estimated in the range -11.7 to -11.1 for both jets combined. Thus $\dot{M}_{out}$/$\dot{M}_{acc}$ [\Msun/yr] lies below the maximum value predicted by magneto-centrifugal jet launching models. Finally, both model fitting of the Balmer decrements and spectro-astrometric analysis of the H$\alpha$ line show that the bulk of the H I emission comes from the accretion flow., Comment: accepted by Astronomy & Astrophysics

We design, fabricate and experimentally demonstrate a highly efficient adiabatic mode converter for coupling light into a silicon slot waveguide with a slot width as large as 320nm. This strip-to-slot mode converter is optimized to provide a measured insertion loss as low as 0.08dB. Our mode converter provides 0.1dB lower loss compared to a conventional V-shape mode converter. This mode converter is used to couple light into and out of a 320nm slot photonic crystal waveguide, and it is experimentally shown to improve the coupling efficiency up to 3.5dB compared to the V-shape mode converter, over the slow-light wavelength region., Comment: 13 pages, 7 figures

Spectroscopic follow-up is a pre-requisite for studies of the formation and early evolution of brown dwarfs. Here we present IRTF/SpeX near-infrared spectroscopy of 30 candidate members of the young Upper Scorpius association, selected from our previous survey work. All 24 high confidence members are confirmed as young very low mass objects with spectral types from M5 to L1, 15-20 of them are likely brown dwarfs. This high yield confirms that brown dwarfs in Upper Scorpius can be identified from photometry and proper motions alone, with negligible contamination from field objects (<4%). Out of the 6 candidates with lower confidence, 5 might still be young very low mass members of Upper Scorpius, according to our spectroscopy. We demonstrate that some very low mass class II objects exhibit radically different near infrared (0.6 - 2.5micron) spectra from class III objects, with strong excess emission increasing towards longer wavelengths and partially filled in features at wavelengths shorter than 1.25micron. These characteristics can obscure the contribution of the photosphere within such spectra. Therefore, we caution that near infrared derived spectral types for objects with discs may be unreliable. Furthermore, we show that the same characteristics can be seen to some extent in all class II and even a significant fraction of class III objects (~40%), indicating that some of them are still surrounded by traces of dust and gas. Based on our spectra, we select a sample of objects with spectral types of M5 to L1, whose near-infrared emission represents the photosphere only. We recommend the use of these objects as spectroscopic templates for young brown dwarfs in the future., Comment: 12 pages, 9 figures, Accepted in MNRAS

In this paper, we present the design and experimental demonstration of a high dynamic range electric field sensor based on electro-optic (EO) polymer directional coupler waveguides that offers the strong and ultra-fast EO response of EO polymer. As compared to conventional photonic electric field sensors, our directional coupler waveguide design offers several advantages such as bias-free operation, highly linear measurement response up to 70dB, and a wide electric field detection range from 16.7V/m to 750kV/m at a frequency of 1GHz., Comment: 7 pages, 5 figures, conference. "EO-polymer waveguide based high dynamic range EM wave sensors", SPIE Photonics West, Proc. SPIE 8258, 82580Y, 2012. arXiv admin note: substantial text overlap with arXiv:1403.0138

Polymer based electro-optic modulators have shown great potentials in high frequency analog optical links. Existing commercial LiNibO3 Mach-Zehnder modulators have intrinsic drawbacks in linearity to provide high fidelity communication. In this paper, we present the design, fabrication and characterization of a traveling wave directional coupler modulator based on electro-optic polymer, which is able to provide high linearity, high speed, and low optical insertion loss. A silver ground electrode is used to reduce waveguide sidewall roughness due to the scattering of UV light in photolithography process in addition to suppressing the RF loss. A 1-to-2 multi-mode interference 3dB-splitter, a photobleached refractive index taper and a quasi-vertical taper are used to reduce the optical insertion loss of the device. The symmetric waveguide structure of the MMI-fed directional coupler is intrinsically bias-free, and the modulation is obtained at the 3-dB point regardless of the ambient temperature. By achieving low RF loss, characteristic impedance matching with 50{\Omega} load, and excellent velocity matching between the RF wave and the optical wave, a travelling wave electrode is designed to function up to 62.5GHz. Domain-inversion poling with push-pull configuration is applied using alternating pulses on a 2-section directional-coupler to achieve a spurious free dynamic range of 110dB/Hz2/3. The 3-dB electrical bandwidth of device is measured to be 10GHz., Comment: 11 pages, 12 figures, conference. "Improved performance of traveling wave directional coupler modulator based on electro-optic polymer," SPIE Photonics West, Proc. SPIE 8267, 82671B, 2012. arXiv admin note: text overlap with arXiv:1403.0134

The accelerating increase in information traffic demands the expansion of optical access network systems that require cost reduction of optical and photonic components. Low cost, ease of fabrication, and integration capabilities of low optical-loss polymers make them attractive for photonic applications. In addition to passive wave-guiding components, electro-optic (EO) polymers consisting of a polymeric matrix doped with organic nonlinear chromophores have enabled wide-RF-bandwidth and low-power optical modulators. Beside board level passive and active optical components, compact on-chip modulators (a few 100 micronmeters to a few millimeters) have been made possible by hybrid integration of EO polymers onto the silicon platform. This paper summarizes some of the recent progress in polymer based optical modulators and interconnects. A highly linear, broadband directional coupler modulator for use in analog optical links and compact, and low-power silicon/polymer hybrid slot photonic crystal waveguide modulators for on chip applications are presented. Recently, cost-effective roll-to-roll fabrication of electronic and photonic systems on flexible substrates has been gaining interest. A low-cost imprinted/ink-jet-printed Mach-Zehnder modulator and board-to-board optical interconnects using microlens integrated 45-degree mirror couplers compatible with the roll-to-roll fabrication platforms are also presented., Comment: 15 pages, 17 figures. arXiv admin note: text overlap with arXiv:1403.0134

In this paper, we present the design, fabrication and characterization of a traveling wave directional coupler modulator based on electro-optic polymer, which is able to provide both high linearity and broad bandwidth. The high linearity is realized by introducing domain-inversion technique in the two-domain directional coupler. A travelling wave electrode is designed to function with bandwidth-length product of 302GHz cm, by achieving low microwave loss, excellent impedance matching and velocity matching, as well as smooth electric field profile transformation. The 3-dB bandwidth of the device is measured to be 10GHz. The spurious free dynamic range of about 110dB Hz^(2/3) is measured over the modulation frequency range 2-8GHz. To the best of our knowledge, such high linearity is first measured at the frequency up to 8GHz. In addition, a 1-to-2 multi-mode interference 3dB-splitter, a photobleached refractive index taper and a quasi-vertical taper are used to reduce the optical insertion loss of the device., Comment: 18 pages, 12 figures

The present work demonstrates an electro-optic polymer based Mach-Zehnder (MZ) modulator fabricated utilizing advanced ultraviolet (UV) imprinting and aligned ink-jet printing technologies for patterning and layer deposition. The bottom electrode layer is designed and directly ink-jet printed on the substrate to form the patterned layer. The waveguide structure is formed into a bottom cladding polymer using a transparent flexible mold based UV imprinting method. All other layers can be ink-jet printed. The top electrode is aligned and printed over the Mach-Zehnder arm. The modulator demonstrates a V-pi of 8V at 3kHz. This technology shows great potential in minimizing the fabrication complexity and roll-to-roll compatibility for manufacturing low cost, light-weight, and conformal modulators at high throughput., Comment: 3 pages, 4 figures

We design a high dynamic range electric field sensor based on domain inverted electro-optic (E-O) polymer Y-fed directional coupler for electromagnetic wave detection. This electrode-less, all optical, wideband electrical field sensor is fabricated using standard processing for E-O polymer photonic devices. Experimental results demonstrate effective detection of electric field from 16.7V/m to 750KV/m at a frequency of 1GHz, and spurious free measurement range of 70dB., Comment: 6 pages, 5 figures

We present the design of a compact and highly sensitive electric field sensor based on a bowtie antenna-coupled slot photonic crystal waveguide (PCW). An electro-optic (EO) polymer with a large EO coefficient, r33=100pm/V, is used to refill the PCW slot and air holes. Bowtie-shaped electrodes are used as both poling electrodes and as receiving antenna. The slow-light effect in the PCW is used to increase the effective in-device r33>1000pm/V. The slot PCW is designed for low-dispersion slow light propagation, maximum poling efficiency as well as optical mode confinement inside the EO polymer. The antenna is designed for operation at 10GHz., Comment: 7 pages, 5 figures, conference. "Electric field sensor based on electro-optic polymer refilled silicon slot photonic crystal waveguide coupled with bowtie antenna," Proc. SPIE 8624, 862418 (2013)

We design and demonstrate a compact and low-power band-engineered electro-optic (EO) polymer refilled silicon slot photonic crystal waveguide (PCW) modulator. The EO polymer is engineered for large EO activity and near-infrared transparency. A PCW step coupler is used for optimum coupling to the slow-light mode of the band-engineered PCW. The half-wave switching-voltage is measured to be V{\pi}=0.97+-0.02V over optical spectrum range of 8nm, corresponding to the effective in-device r33 of 1190pm/V and V{\pi} L of 0.291+-0.006V mm in a push-pull configuration. Excluding the slow-light effect, we estimate the EO polymer is poled with an efficiency of 89pm/V in the slot., Comment: 4 pages, 4 figures

In this review we focus on the role jets and outflows play in the star and planet formation process. Our essential question can be posed as follows: are jets/outflows merely an epiphenomenon associated with star formation or do they play an important role in mediating the physics of assembling stars both individually and globally? We address this question by reviewing the current state of observations and their key points of contact with theory. Our review of jet/outflow phenomena is organized into three length-scale domains: Source and Disk Scales ($0.1-10^2$ au) where the connection with protostellar and disk evolution theories is paramount; Envelope Scales ($10^2-10^5$ au) where the chemistry and propagation shed further light on the jet launching process, its variability and its impact on the infalling envelope; Parent Cloud Scales ($10^5-10^6$ au) where global momentum injection into cluster/cloud environments become relevant. Issues of feedback are of particular importance on the smallest scales where planet formation regions in a disk may be impacted by the presence of disk winds, irradiation by jet shocks or shielding by the winds. Feedback on envelope scales may determine the final stellar mass (core-to-star efficiency) and envelope dissipation. Feedback also plays an important role on the larger scales with outflows contributing to turbulent support within clusters including alteration of cluster star formation efficiencies (feedback on larger scales currently appears unlikely). A particularly novel dimension of our review is that we consider results on jet dynamics from the emerging field of High Energy Density Laboratory Astrophysics (HEDLA). HEDLA is now providing direct insights into the 3-D dynamics of fully magnetized, hypersonic, radiative outflows., Comment: Accepted for publication as a chapter in Protostars and Planets VI, University of Arizona Press (2014), eds. H. Beuther, R. Klessen, C. Dullemond, Th. Henning

We derive the physical properties at the base of the jet from DG Tau both along and across the flow and as a function of velocity. We analysed seven optical spectra of the DG Tau jet, taken with the Hubble Space Telescope Imaging Spectrograph. The spectra were obtained by placing a long-slit parallel to the jet axis and stepping it across the jet width. The resulting position-velocity diagrams in optical forbidden emission lines allowed access to plasma conditions via calculation of emission line ratios. We find at the base of the jet high electron density, $n_e \sim $ 10$^5$, and very low ionisation, $x_e \sim 0.02-0.05$, which combine to give a total density up to $n_H \sim $ 3 10$^6$. This analysis confirms previous reports of variations in plasma parameters along the jet, (i.e. decrease in density by several orders of magnitude, increase of $x_e$ from 0.05 to a plateau at 0.7 downstream at 2$''$ from the star). Furthermore, a spatial coincidence is revealed between sharp gradients in the total density and supersonic velocity jumps. This strongly suggests that the emission is caused by shock excitation. The position-velocity diagrams indicate the presence of both fast accelerating gas and slower, less collimated material. We derive the mass outflow rate, $\dot{M}_j$, in the blue-shifted lobe in different velocity channels, that contribute to a total of $\dot{M}_j \sim$ 8 $\pm$ 4 10$^{-9}$ M$_\odot$ yr$^{-1}$. We estimate that a symmetric bipolar jet would transport at the low and intermediate velocities probed by rotation measurements, an angular momentum flux of $\dot{L}_j \sim$ 2.9 $\pm$ 1.5 10$^{-6}$ M$_\odot$ yr$^{-1}$ AU km s$^{-1}$. The derived properties of the DG Tau jet are demonstrated to be consistent with magneto-centrifugal theory. However, non-stationary modelling is required in order to explain all of the features revealed at high resolution., Comment: 16 pages, 18 figures

SONYC, short for "Substellar Objects in Nearby Young Clusters", is a survey program to provide a census of the substellar population in nearby star forming regions. We have conducted deep optical and near-infrared photometry in five young regions (NGC1333, rho Ophiuchi, Chamaeleon-I, Upper Sco, and Lupus-3), combined with proper motions, and followed by extensive spectroscopic campaigns with Subaru and VLT, in which we have obtained more than 700 spectra of candidate low-mass objects. We have identified and characterized more than 60 new substellar objects, among them a handful of objects with masses close to, or below the Deuterium burning limit. Through SONYC and surveys by other groups, the substellar IMF is now well characterized down to ~ 5 - 10 MJup, and we find that the ratio of the number of stars with respect to brown dwarfs lies between 2 and 6. A comprehensive survey of NGC 1333 reveals that, down to ~5MJup, free-floating objects with planetary masses are 20-50 times less numerous than stars, i.e. their total contribution to the mass budget of the clusters can be neglected., Comment: to appear in the proceedings of the conference 'Brown dwarfs come of age', May 20-24 2013, Memorie della Societa Astronomica Italiana

The active young protostar DG Tau has an extended jet that has been well studied at radio, optical, and X-ray wavelengths. We report sensitive new VLA full-polarization observations of the core and jet between 5 GHz and 8 GHz. Our high angular resolution observation at 8 GHz clearly shows an unpolarized inner jet with a size 42 AU (0.35") extending along a position angle similar to the optical-X ray outer jet. Using our nearly coeval 2012 VLA observations, we find a spectral-index=+0.46+/-0.05, which combined with the lack of polarization, is consistent with bremsstrahlung (free-free) emission, with no evidence for a non-thermal coronal component. By identifying the end of the radio jet as the optical depth unity surface, and calculating the resulting emission measure, we find our radio results are in agreement with previous optical line studies of electron density and consequent mass-loss rate. We also detect a weak radio knot at 5 GHz located 7" from the base of the jet, coincident with the inner radio knot detected by Rodriguez et al. (2012) in 2009 but at lower surface brightness. We interpret this as due to expansion of post-shock ionized gas in the three years between observations., Comment: 19 pages, 7 figures

We present a census of the disk population for UKIDSS selected brown dwarfs in the 5-10 Myr old Upper Scorpius OB association. For 116 objects originally identified in UKIDSS, the majority of them not studied in previous publications, we obtain photometry from the WISE database. The resulting colour-magnitude and colour-colour plots clearly show two separate populations of objects, interpreted as brown dwarfs with disks (class II) and without disks (class III). We identify 27 class II brown dwarfs, 14 of them not previously known. This disk fraction (27 out of 116 or 23%) among brown dwarfs was found to be similar to results for K/M stars in Upper Scorpius, suggesting that the lifetimes of disks are independent of the mass of the central object for low-mass stars and brown dwarfs. 5 out of 27 disks (19%) lack excess at 3.4 and 4.6 microns and are potential transition disks (i.e. are in transition from class II to class III). The transition disk fraction is comparable to low-mass stars. We estimate that the timescale for a typical transition from class II to class III is less than 0.4 Myr for brown dwarfs. These results suggest that the evolution of brown dwarf disks mirrors the behaviour of disks around low-mass stars, with disk lifetimes on the order of 5-10 Myr and a disk clearing timescale significantly shorter than 1 Myr., Comment: 14 pages, 10 figures. Accepted in MNRAS, minor changes after proofreading

We present the results of a variability study of accreting young stellar objects in the Chameleon I star-forming region which is based on ~300 high resolution optical spectra from the multi-object fibre spectrograph FLAMES/GIRAFFE at the ESO/VLT. Twenty five objects with spectral types from G2-M5.75 were observed 12 times over the course of 15 months. Using the emission lines Ha (6562.81 A) and Ca II (8662.1 A) as accretion indicators we found 10 accreting and 15 non-accreting objects. We derived accretion rates for all accretors in the sample using the Ha equivalent width, Ha 10% width and the CaII equivalent width. The mean amplitude of variations in derived accretion rate from Ha equivalent width was ~ 0.37 dex, from Ca II equivalent width ~0.83 dex and from Ha 10% width ~1.11 dex. Based on the large amplitude of variations in accretion rates derived from the Ha 10% width with respect to the other diagnostics, we do not consider it to be a reliable accretion rate estimator. Taking the variations in Ha equivalent width and CaII equivalent width accretion rates to be closer to the true value, they suggest that the spread which has been found around the accretion rate to stellar mass relation is not due to the variability of individual objects on time-scales of weeks to ~1 year. From these variations we can also infer that the accretion rates are stable within < 0.37 dex over time-scales of less than 15 months. A major portion of the accretion variability was found to occur on less than the shortest time-scales in our observations, 8-25 days, which is comparable with the rotation periods of these young stellar objects. This could be an indication that what we are probing is spatial structure in the accretion flows, and also suggests that observations on time-scales of ~a couple of weeks are sufficient to limit the total extent of accretion rate variations in typical young stars., Comment: 12 figures, 21 pages, accepted MNRAS

Characterising stellar and circumstellar properties of embedded young stellar objects (YSOs) is mandatory for understanding the early stages of the stellar evolution. This task requires the combination of both spectroscopy and photometry, covering the widest possible wavelength range, to disentangle the various protostellar components and activities. As part of the POISSON project, we present a multi-wavelength spectroscopic and photometric investigation of embedded YSOs in L1641, aimed to derive the stellar parameters and evolutionary stages and to infer their accretion properties. Our database includes low-resolution optical-IR spectra from the NTT and Spitzer (0.6-40 um) and photometric data covering a spectral range from 0.4 to 1100 um, which allow us to construct the YSOs spectral energy distributions (SEDs) and to infer the main stellar parameters. The SED analysis allows us to group our 27 YSOs into nine Class I, eleven Flat, and seven Class II objects. However, on the basis of the derived stellar properties, only six Class I YSOs have an age of ~10^5 yr, while the others are older 5x10^5-10^6 yr), and, among the Flat sources, three out of eleven are more evolved objects (5x10^6-10^7 yr), indicating that geometrical effects can significantly modify the SED shapes. Inferred mass accretion rates (Macc) show a wide range of values (3.6x10^-9 to 1.2x10^-5 M_sun yr^-1), which reflects the age spread observed in our sample. Average values of mass accretion rates, extinction, and spectral indices decrease with the YSO class. The youngest YSOs have the highest Macc, whereas the oldest YSOs do not show any detectable jet activity in either images and spectra. We also observe a clear correlation among the YSO Macc, M*, and age, consistent with mass accretion evolution in viscous disc models., Comment: 61 pages, 16 figures; A&A in press

We present the results of the analysis of LR optical-NIR spectra (0.6-2.4 um) of a sample 47 YSOs in the ChaI and II star-forming clouds. These data are part of the POISSON project (Protostellar Optical-Infrared Spectral Survey on NTT). The aim is to determine the accretion luminosity (Lacc) and mass accretion rate (Macc) of the sources through the analysis of the detected emission features. We also aim at verifying the reliability and consistency of the existing empirical relationships connecting emission line luminosity and Lacc. We employ five tracers (OI-6300A, Ha, CaII-8542A, Pab, and Brg) to derive the accretion luminosity. The tracers provide Lacc values showing different scatters when plotted as a function of L*. The Brg seems to be the most reliable, because it gives the minimum Lacc dispersion over the entire range of L*, whereas the other tracers provide much more scattered Lacc values, which are not expected for our homogeneous sample. The comparison between Lacc(Brg) and Lacc obtained from the other tracers also shows systematic differences among the empirical relationships. These may probably be ascribed to different excitation mechanisms contributing to the line emission, which may vary between our sample and those where the relationships were calibrated. Adopting the Lacc derived from Brg, we find Lacc=0.1L*-1L* for all sources, and Macc of the order of 10^-7-10^-9 Msun/yr. The Macc derived in ChaI are proportional to M*^2, as found in other low-mass star-forming regions. The discrepancies observed in the case of Lacc(Brg) and Lacc(Pab) can be related to different intrinsic Pab/Brg, ratios. The derived ratios show the existence of two different emission modalities, one that agrees with predictions of both wind and accretion models, the other suggesting optically thick emission from relatively small regions (10^21-10^22 cm^-3) with gas at low temperatures (<4000K)., Comment: 22 pages, 8 figures, accepted for publication in A&A; institute affiliations and typos corrected

This paper presents the results of a search for brown dwarfs in the Upper Scorpius Association using data from the UKIRT Infrared Deep Sky Survey (UKIDSS) Galactic Cluster Survey. Candidate young brown dwarfs were first chosen by their position in colour magnitude diagrams with further selection based on proper motions to ensure Upper Scorpius membership. Proper motions were derived by comparing UKIDSS and 2MASS data. Using that method we identify 19 new brown dwarfs in the southern part of the association. In addition there are up to 8 likely members with slightly higher dispersion velocity. The ratio of brown dwarfs to stars was found to be consistent with other areas in Upper Scorpius. It was also found to be similar to other results from young clusters with OB associations, and lower than those without, suggesting the brown dwarf formation rate may be a function of environment., Comment: 8 pages, 4 figures, accepted in MNRAS

We report on new X-ray observations of the classical T Tauri star DG Tau. DG Tau drives a collimated bi-polar jet known to be a source of X-ray emission perhaps driven by internal shocks. The rather modest extinction permits study of the jet system to distances very close to the star itself. Our initial results presented here show that the spatially resolved X-ray jet has been moving and fading during the past six years. In contrast, a stationary, very soft source much closer (~ 0.15-0.2") to the star but apparently also related to the jet has brightened during the same period. We report accurate temperatures and absorption column densities toward this source, which is probably associated with the jet base or the jet collimation region., Comment: Proceedings of the 16 Cool Stars Workshop, in press, 7 pages, 7 figures

Strong outbursts in very young and embedded protostars are rare and not yet fully understood. They are believed to originate from an increase of the mass accretion rate onto the source. We report the discovery of a strong outburst in a low-mass embedded young stellar object (YSO), namely 2MASS-J05424848-0816347 or [CTF93]216-2, as well as its photometric and spectroscopic follow-up. Using near- to mid-IR photometry and NIR low-resolution spectroscopy, we monitor the outburst, deriving its magnitude, duration, as well as the enhanced accretion luminosity and mass accretion rate. [CTF93]216-2 increased in brightness by ~4.6, 4.0, 3.8, and 1.9 mag in the J, H, Ks bands and at 24 um, respectively, corresponding to an L_bol increase of ~20 L_sun. Its early spectrum, probably taken soon after the outburst, displays a steep almost featureless continuum, with strong CO band heads and H_2O broad-band absorption features, and Br gamma line in emission. A later spectrum reveals more absorption features, allowing us to estimate T_eff~3200 K, M~0.25 M_sun, and mass accretion rate~1.2x10^{-6} M_sun yr^{-1}. This makes it one of the lowest mass YSOs with a strong outburst so far discovered., Comment: To be published in A&A letter; 5 pages, 4 figures

We present a global study of low mass, young stellar object (YSO) surface densities in nearby (< 500 pc) star forming regions based on a comprehensive collection of Spitzer Space Telescope surveys. We show that the distribution of YSO surface densities in the solar neighbourhood is a smooth distribution, being adequately described by a lognormal function from a few to 10^3 YSOs per pc^2, with a peak at 22 stars/pc^2 and a dispersion of 0.85. We do not find evidence for multiple discrete modes of star-formation (e.g. clustered and distributed). Comparing the observed surface density distribution to previously reported surface density threshold definitions of clusters, we find that the fraction of stars in clusters is crucially dependent on the adopted definitions, ranging from 40 to 90%. However, we find that only a low fraction (< 26%) of stars are formed in dense environments where their formation/evolution (along with their circumstellar disks and/or planets) may be affected by the close proximity of their low-mass neighbours., Comment: 6 pages, 2 figures, MNRAS letters, accepted

Over the last number of years spectroscopic studies have strongly supported the assertion that protostellar accretion and outflow activity persists to the lowest masses. In this paper we present the results of our latest investigation of brown dwarf (BD) outflow activity and report on the discovery of two new outflows. Here ISO-Oph 32 is shown to drive a blue-shifted outflow with a radial velocity of 10-20 km/s and spectro-astrometric analysis constrains the position angle of this outflow to 240 +/- 7 degrees. The BD candidate ISO-Cha1 217 is found to have a bipolar outflow bright in several key forbidden lines (radial velocity = -20 km/s, +40 km/s) and with a PA of 190-210 degrees. A striking feature of the ISO-Cha1 217 outflow is the strong asymmetry between the red and blue-shifted lobes. This asymmetry is revealed in the relative brightness of the two lobes (red-shifted lobe is brighter), the factor of two difference in radial velocity (the red-shifted lobe is faster) and the difference in the electron density (again higher in the red lobe). Such asymmetries are common in jets from low mass protostars and the observation of a marked asymmetry at such a low mass supports the idea that BD outflow activity is scaled down from low mass protostellar activity. In addition to presenting these new results, a comprehensive comparison is made between BD outflow activity and jets launched by CTTSs. In particular, the application of current methods for investigating the excitation conditions and mass loss rates in CTT jets to BD spectra is explored., Comment: Accepted by Astrophysical Journal

We investigate the physical structure and dust reprocessing in the shocks along the beam of a number of classical Herbig-Haro jets in the Orion and Lupus molecular cloud. Spectral diagnostic techniques are applied to obtain the jet physical conditions from the ratios between selected forbidden lines. The presence of dust grains is investigated by estimating the gas-phase abundance of calcium with respect to its Solar value. We find the electron density, ne, varies between 0.05-4 10^3 cm^-3, the ionisation fraction, xe, is 0.01-0.7, the temperature, te, ranges between 0.6-3 10^4 K, and the hydrogen density between 0.01-6 10^4 cm^-3. Interestingly, in the HH 111 jet, ne, xe, and te, peak in the High Velocity Interval (HVI) of the strongest working surfaces, confirming the prediction from shocks models. Calcium turns out to be depleted with respect to its Solar value, but its gas-phase abundance is higher than that estimated in the interstellar medium in Orion. The depletion is high (up to 80%) along the low-excited jets, while low or no depletion is measured in the jets which show higher excitation conditions. Moreover, in HH 111 the depletion is lower in the HVI of the faster shock. Our results confirm the shock structure predicted by models and indicate that the shocks occurring along the jets are partially destroying the dust grains and that the efficiency of dust reprocessing strongly depend on shock velocity. However, the high Ca gas-phase abundance estimated in some of the knots is not well justified by existing models of dust reprocessing in shocks, and indicates that the dust must have been partially reprocessed in the region where the flow originates., Comment: 13 pages, 12 figures, accepted for publication on AandA

We report on experiments in which magnetically driven radiatively cooled plasma jets were produced by a 1 MA, 250 ns current pulse on the MAGPIE pulsed power facility. The jets were driven by the pressure of a toroidal magnetic field in a ''magnetic tower'' jet configuration. This scenario is characterized by the formation of a magnetically collimated plasma jet on the axis of a magnetic ''bubble'', confined by the ambient medium. The use of a radial metallic foil instead of the radial wire arrays employed in our previous work allows for the generation of episodic magnetic tower outflows which emerge periodically on timescales of ~30 ns. The subsequent magnetic bubbles propagate with velocities reaching ~300 km/s and interact with previous eruptions leading to the formation of shocks., Comment: 6 pages, 5 figures. Accepted for publication in Astrophysics & Space Science

As outflow activity in low mass protostars is strongly connected to ac- cretion it is reasonable to expect accreting brown dwarfs to also be driving out- flows. In the last three years we have searched for brown dwarf outflows using high quality optical spectra obtained with UVES on the VLT and the technique of spectro-astrometry. To date five brown dwarf outflows have been discovered. Here the method is discussed and the results to date outlined.

It is now apparent that classical T Tauri-like outflows commonly accompany the formation of young brown dwarfs. To date two optical outflows have been discovered and results presented in this paper increase this number to three. Using spectro-astrometry the origin of the LS-RCrA 1 forbidden emission lines in a blue-shifted outflow is confirmed. The non-detection of the red-shifted component of the outflow in forbidden lines, along with evidence for some separation between low and high velocity outflow components, do not support the hypothesis that LS-RCrA 1 has an edge-on accretion disk. The key result of this analysis is the discovery of an outflow component to the H-alpha line. The H-alpha line profile has blue and red-shifted features in the wings which spectro-astrometry reveals to also originate in the outflow. The discovery that H-alpha emission in BDs can have a significant contribution from an outflow suggests the use of H-alpha line widths as a proxy of mass accretion in BDs is not clear-cut. This method assumes that any contribution to the H-alpha line flux from a possible outflow is negligible. Finally the fact that the H-alpha line traces both lobes of the outflow while only the blue-shifted lobe is seen in forbidden emission points to the presence of a dust hole in the accretion disk of LS-RCrA 1. This is commonly seen in CTTSs and is assumed to signal the onset of planet formation., Comment: 13 pages, 2 figures