Search

ObjectiveDesign a predictive risk model for minimizing iliofemoral vascular complications (IVC) in a contemporary era of transfemoral-transcatheter aortic valve replacement (TF-TAVR).BackgroundIVC remains a common complication of TF-TAVR despite the technological improvement in the new-generation transcatheter systems (NGTS) and enclosed poor outcomes and quality of life. Currently, there is no accepted tool to assess the IVC risk for calcified and tortuous vessels.MethodsWe reconstructed CT images of 516 propensity-matched TF-TAVR patients using the NGTS to design a predictive anatomical model for IVC and validated it on a new cohort of 609 patients. Age, sex, peripheral artery disease, valve size, and type were used to balance the matched cohort.ResultsIVC occurred in 214 (7.2%) patients. Sheath size (p = 0.02), the sum of angles (SOA) (p 100, in predicting IVC (C-stat 0.936, 95% CI 0.911–0.959, p 1.00 in a tree model increased the overall accuracy to 97.7%. In the validation cohort, the model predicted 89.5% of the IVC cases with an overall 89.5% sensitivity, 98.9% specificity, and 94.2% accuracy (C-stat 0.842, 95% CI 0.904–0.980, p

The development of sustainable infrastructure is a serious issue faced by modern society. Portland cement is one of the common ingredients in concrete, which influences construction activities. The major issue with the employment of cement in civil-based works is that it is responsible for carbon dioxide emission (CO2-e), the primary greenhouse gas responsible for global warming. Alternative to cement-based concrete, geopolymer concrete (GPC) employs zero cement for concrete production, leading to a reduction in CO2-e. In the case of mass concreting, interface/joints are developed, which are found to be the possible failure spots of brittle fracture. Concrete with different grades (strength) may interface, or other building materials, such as reinforcing materials. The interfacial bond strength has to be examined to ensure the homogeneity of the composite structures. The employment of shear ties at the interface ensures homogeneous behaviour. Moreover, a higher number of shear ties in the shear zone increases the cost of production. The interfacial shear strength (ISS) parameters will be miserably damaged in the concrete structures subjected to fire accidents, which might depend on the intensity of temperature exposure and its duration. The current study investigates the ISS of the High Strength Self-compacting geopolymer concrete (HSGC) in the interface of push-off samples. SCGC was made using binary blended composites, which comprised Fly Ash (FA), Metakaolin (MK), and Ground Granulated Blast Furnace Slag (GGBFS) as precursor materials. The work highlights the need to comprehend the reduction in shear strength of SCGC subjected to high temperatures. The fresh properties of the SCGC composites strictly adhered to the EFNARC guidelines. The SCGC composites, after their curing period, were exposed to 821 ℃, 925 ℃, 986 ℃, and 1029 ℃ following ISO 834 guidelines. Residual mechanical properties were examined after being cooled to room temperature.

Aluminum-based metal matrix composites (AMMCs) find extensive applications in aerospace, defence, automotive, and various sectors on account of remarkable mechanical properties, lightweight nature, and excellent dimensional stability. In this research, AA7075 matrix material was reinforced with tungsten carbide ceramic particles with various 0, 5, 10, 15 and 20 weight percentages (wt%) with the use of Ultrasonic assisted stir casing setup. The stir casted AA7075 MMCs were subjected to XRD, SEM, and density test to investigate the presence of elements, microstructure and density. The tensile, micro hardness, and wear test were performed on AL7075 based MMCs after conducting NaCl based spray test at the condition of spray pressure of 1.2 kg cm ^−2 , spray duration of 120 h and PH value of 8.2 to determine the wear resistance, micro hardness and Ultimate Tensile Strength. The XRD test confirmed the presence of secondary phases such as Al _2 Cu, W _2 C, and MgZn _2 with Al and WC phases. The SEM test confirmed the uniform dispersion and no more cluster formation upto 15 wt% WC addition and agglomeration of WC was occurred in the addition of 20 wt% of WC. The enhancing of wt% of WC improved the corrosion resistance, Micro hardness, UTS, wear and up to 15 wt% addition and decreases by the 20 wt% WC addition. The higher tensile strength 312 MPa was obtained from AA7075/15 wt%WC composite. The lower wear rate 0.11 mg m ^−1 was obtained from AA7075/15 wt%WC at 1000 m sliding distance with 1.2 m s ^−1 sliding velocity. The improved mechanical and tribological properties were mainly depended on strengthening mechanisms such as load transfer mechanism and dislocation strengthening mechanism.

First off, humans now enjoy a higher standard of living thanks to contemporary technology. But shopping has become a world unto itself in the modern day. With its cutting-edge technology, the “Smart Shopping Trolley Using RFID and ZigBee” seeks to completely transform the shopping experience. With Radio-Frequency Identification (RFID), ZigBee communication, and a Hc-05 Bluetooth module, this cutting-edge cart makes shopping easy and productive. Customers may easily add items with RFID tags to the cart thanks to RFID technology. There is no longer a need for human scanning or checkout lines because the system automatically recognizes and records the items [9]-[10]. The ZigBee communication system monitors the items in customers’ carts as they navigate the store and syncs with their mobile phone via a Bluetooth module into the app called Serial Bluetooth terminal which guarantee precise billing.

The discharge of wastewater into the ecosystem has an impact on fish and human health, therefore the toxins needs to be removed. It is sustainable to remove pollutants from wastewater by utilizing biochar made from lignocellulosic biomass (LCB) that has undergone thermal degradation. Because of it's large surface area, hollow structure, the oxygen groupings, and relatively low cost, bio Char is now known as a change rival in catalytic processes. Biochar was used in conjunction with a number of cutting-edge, creative technologies to treat wastewater efficiently. Details collected soil sampling, such as facts about the toxins current, the nature of the soil, its surrounding circumstances, and the efficacy of various rehabilitation methods, can be used to training machine learning methods. Through data analysis, machine learning models are able to spot relationships and trends which human beings might miss, which improves the accuracy of projections regarding the results of soil cleanup. The review paper outlines the challenges facing biochar-based enzymes using immediate and new technologies, along with emphasizes the application of algorithmic learning in pollution removal. Limitations and likelihoods for additional investigation are examined.

The challenging situations of growing energy consumption, waste collection and destruction of the surroundings had been made greater apparent by means of the explosive rise of the global population and commercial interest. Modern techniques based on the 5R principle (Recycle, Reduce, Reuse, Recover, and Repaired) are critical to efficaciously addressing these problems. One promising way to turn non-recyclable waste into beneficial power assets is waste-to-power (WtE) the conversion method. This work presents a comprehensive evaluation of various WtE technologies, consisting of pyrolysis, gasoline production, anaerobic digestion, and combustion, highlighting their ability to reduce waste associated troubles. Furthermore, as supplementary techniques for sustainable waste control methods, it seems at the combination of progressed waste control (IWM), higher landfill mining, and sustainable substances control (SSM). The impact on the environment of waste-to-power changes are evaluated through a radical evaluation of current research and technology advancements, emphasizing decreases in landfill utilization, GHG emissions, and the promoting of renewable energy resources. The consequences highlight the essential role that WtE generation performs in accomplishing power efficiency improvements, cleaner production, and the development of the round financial structure. Ultimately, the article makes suggestions for future studies initiatives and coverage recommendations intended to optimize the economic and environmental gains from WtE deployments.

This paper presents a methodology for optimising pulsed gas metal arc welding parameters on Stainless Steel GRADE 410. Most sectors favour the economic welding technique for its favourable outcomes, such as enhanced strength and reduced corrosion. Compared to conventional welding methods, pulsed gas metal arc welding has the advantage of reducing current consumption and increasing the rate at which metal is deposited. An optimisation technique is employed to forecast the weld bead's accurate geometry, penetration depth, and reinforcement height, considering the welding input parameters such as welding speed, current rate, and frequency level. The Taguchi technique uses experimental analysis by considering input and output parameters. A multiple regression analysis model has been developed for SS Grade 410 Stainless steel to determine the bead geometry's correctness.

Al7075 is a material that is both lightweight and has a high thermal conductivity. Aluminum is one of the best materials available, and it also happens to be one of the least expensive. This study examines the hardness, tensile strength, compressive strength, metallurgical characteristics, tribological behavior, impact of wear test parameters, and corrosion resistance of Al7075 hybrid composites reinforced with hard reinforcement MoS2. The powder metallurgy technique is used to create the Al7075 hybrid composites. Molybdenum disulfide served as a soft reinforcement to boost the corrosion resistance of the Al7075 hybrid composites and to give higher wear resistance with a reduced Coefficient of Friction. Al7075 hybrid composites contain 2%, 4%, 6%, and 8% weight of molybdenum disulfide. The scanning electron microscope is utilized to obtain SEM images in order to validate the homogeneous distribution of MoS2 within the aluminum 7075 matrix alloy. It is proof of a composite devoid of flaws and demonstrates the excellence of its fabrication.

The study paper investigates the rapidly evolving field of sustainable design and the increasing acceptance of biodegradable materials in the method of developing products. This research explores the movement towards environmentally conscious designs in light of increased environmental concerns and increasing customer demand for goods that are sustainable. This study addresses a range of biodegradable materials, examining their corresponding characteristics and investigating their integration into product design in various industries. This research discusses some of the challenges encountered in the purchase, production, and promotion of biodegradable products, all the while assuring their practicality and physical appeal. Also, the article examines the environmental consequences linked to these materials, drawing comparisons with traditional non-biodegradable alternatives. This study utilizes a mixture of theoretical analysis and case studies to offer useful insight into efficient techniques for implementing materials that decompose into product design. The research places a strong focus on achieving an equilibrium between ecological responsibility, practicality, and appealing to consumers.

(1) Background Pharmacological treatment for psychiatric disorders has shown to only be effective in about one-third of patients, as it is associated with frequent treatment failure, often because of side effects, and a long process of trial-and-error pharmacotherapy until an effective and tolerable treatment is found. This notion emphasizes the urgency for a personalized medicine approach in psychiatry. (2) Methods This prospective patient- and rater-blinded, randomized, controlled study will investigate the effect of dose-adjustment of antidepressants escitalopram and sertraline or antipsychotics risperidone and aripiprazole according to the latest state-of-the-art international dosing recommendations for CYP2C19 and CYP2D6 metabolizer status in patients with mood, anxiety, and psychotic disorders. A total sample of N = 2500 will be recruited at nine sites in seven countries (expected drop-out rate of 30%). Patients will be randomized to a pharmacogenetic group or a dosing-as-usual group and treated over a 24-week period with four study visits. The primary outcome is personal recovery using the Recovery Assessment Scale as assessed by the patient (RAS-DS), with secondary outcomes including clinical effects (response or symptomatic remission), side effects, general well-being, digital phenotyping, and psychosocial functioning. (3) Conclusions This is, to our knowledge, the first international, multi-center, non-industry-sponsored randomized controlled trial (RCT) that may provide insights into the effectiveness and utility of implementing pharmacogenetic-guided treatment of psychiatric disorders, and as such, results will be incorporated in already available dosing guidelines.

Abstract Background The Covid-19 pandemic caused a sudden shift towards remote learning, moving classes to online formats. Not exempt from this switch, laboratory courses traditionally taught in-person were also moved to remote methods, costing students the opportunity to learn these skills hands-on. In order for instructors to provide course materials effectively and engagingly, non-traditional methods should be explored. Virtual reality (VR) has become more accessible in recent years. VR simulations have been used for many years as educational tools in high-risk settings such as flight or medical simulations. Immersive VR videos implemented in a remote laboratory course could provide the students with an engaging and suitable learning experience. To test the effectiveness of VR videos as a tool for remote education, VR videos of the laboratory component of a Biomolecular Engineering course were provided to students. A survey was distributed for students to self-report their experience with the videos. The survey contained quantitative and qualitative ratings of VR as an educational tool. Results The survey showed that students (~ 89% strongly agree or agree) believed the videos provided the opportunity to work at their own pace and were an appropriate length. While ~ 74% of students said that the videos provided enough information to understand the tasks, a small percentage felt that the videos improved their retention (~ 16%) and understanding (~ 9%) of the course material. About 28% of the students responded positively when asked about how VR videos improved their engagement with the material. ~ 30% reported confidence in applying the skills learned in the videos in the future and ~ 43% believe the VR videos were an acceptable alternative to in-person labs. Two-thirds of students reported feeling some form of discomfort while viewing the VR videos and 54% reported not using the headset for the videos and using the 3D video feature instead. Conclusions As many students reported the videos containing appropriate information, the content of the videos was not an issue. A combination of improved camera quality with motion stability, more comfortable headsets, and a reduction in editing issues could greatly improve the quality and effectiveness of VR videos.

Background There are limited data on repeat mitral transcatheter edge‐to‐edge repair for recurrent significant mitral regurgitation (MR). Methods and Results We conducted a single‐center, retrospective analysis of consecutive patients referred to a second mitral transcatheter edge‐to‐edge repair after a technically successful first procedure. Clinical, laboratory, and echocardiographic measures were assessed up to 1 year after the intervention. The composite of all‐cause death or heart failure (HF) hospitalizations constituted the primary outcome. A total of 52 patients (median age, 81 [interquartile range, 76–87] years, 29 [55.8%] men, 26 [50.0%] with functional MR) met the inclusion criteria. MR recurrences were mostly related to progression of the underlying cardiac pathology. All procedures were technically successful. At 1 year, most patients with available records (n=24; 96.0%) experienced improvement in MR severity or New York Heart Association functional class that was statistically significant but numerically modest. Fourteen (26.9%) patients died or were hospitalized due to HF. These were higher‐risk cases with predominantly functional MR who mostly underwent an urgent procedure and exhibited more severe HF indices before the intervention, as well as an attenuated 1‐month clinical and echocardiographic response. Overall, 1‐year course was comparable to that experienced by patients who underwent only a first transcatheter edge‐to‐edge repair at our institution (n=902). Tricuspid regurgitation of greater than moderate grade was the only baseline parameter to independently predict the primary outcome. Conclusions Repeat mitral transcatheter edge‐to‐edge repair is feasible, safe, and clinically effective, especially in non‐functional MR patients without concomitant significant tricuspid regurgitation.

The world is facing a greater issue in the disposal of waste plastics and there is an intense need for research on alternate and sustainable solutions for environmental issues. Waste plastic can be used as aggregates or as a protective layer over aggregates to increase their strength. The aggregate used in flexible pavements was investigated in this study, as well as the use of Geo-Polymer to improve the pavement’s strength and durability. The design of the pavement is done according to the Indian standard codes IRC. Dense bituminous macadam and base courses are taken into account as per the design criteria. The geo-polymer flexible pavement was tested for properties such as the wearing test. Other fundamental tests for aggregate and bitumen used in pavements include specific gravity, flash point, fire point, ductility, softening point, penetration test, water absorption test, bonding strength, durability, and temperature resistance. When geo-polymer plastic bitumen is heated and put as a coating over the base course, it allows the user the air gaps with additional plastic and binds over the aggregate, resulting in increased road stability, smoothness, and vehicle braking effects. It is concluded that with 5% addition of the geo-polymer with bitumen has performed well in all aspects of the bitumen characteristics.

Untreated severe tricuspid regurgitation (TR) carries a poor prognosis. The authors report the 1-year outcomes of transcatheter edge-to-edge repair (TEER) with the TriClip system (Abbott Structural Heart) in patients with complex tricuspid valve anatomies. The multicenter, international TRILUMINATE Pivotal (Trial to Evaluate Cardiovascular Outcomes in Patients Treated with the Tricuspid Valve Repair System Pivotal) trial included a single-arm cohort, with complex tricuspid valve anatomies excluded from the randomized arm (ie, anticipated TR reduction but not to moderate or less after TEER). The primary outcome endpoint of the single arm was 1-year survival with a Kansas City Cardiomyopathy Questionnaire score improvement ≥10 points. In the primary analysis population (N = 100), the mean age was 80 ± 6 years, and 35% had a cardiac implantable electronic device lead. Nearly 90% of patients had massive or torrential TR, 44% had prior left-sided valve interventions, 63% had ≥4-segmental tricuspid leaflet morphology, and the coaptation gap averaged 7.4 ± 2.7 mm. The primary endpoint was met (outcome: 46.2%, performance goal: 30%; P = 0.0008). A total of 81% of subjects had moderate or less TR at 1 year. No major adverse events or deaths occurred within 30 days postprocedure. One-year all-cause mortality and heart failure hospitalization were 15% and 24%, respectively. Significant improvements in NYHA functional class and Kansas City Cardiomyopathy Questionnaire overall scores occurred and were maintained at 1 year. In patients with complex tricuspid anatomies, TEER with the TriClip system demonstrated excellent procedural safety with significant TR reduction and associated improvements in quality of life at 1 year. [Display omitted] [ABSTRACT FROM AUTHOR]

Large language models (LLMs) have recently shown considerable promise in educational robotics by offering generic knowledge necessary in situations when prior programming is not possible. In general, mobile education robots cannot perform tasks like navigation or localization unless they have a working knowledge of maps. In this letter, we tackle the issue of making LLMs more applicable in the field of mobile education robots by helping them to understand Space Graph, a text-based map description. This study, which focuses on LLMs, is divided into several sections. It explores basic natural language processing (NLP) techniques and highlights how they can help create smooth education discussions. Examining the development of LLMs inside NLP systems, the paper explores the benefits and implementation issues of important models utilized in the education sector. Applications useful in educational discussions are described in depth, ranging from patient-focused tools like diagnosis and treatment recommendations to systems that support education providers. We provide thorough instructions and real-world examples for quick engineering, making LLM-based educational robotics solutions more accessible to novices. We demonstrate how LLM-guided upgrades can be easily included in education robotics applications using tutorial-level examples and structured prompt creation. This survey provides a thorough review and helpful advice for leveraging language models in automation development, acting as a road map for researchers navigating the rapidly changing field of LLM-driven educational robotics. [ABSTRACT FROM AUTHOR]

Copyright of Iranian Journal of Mathematical Chemistry is the property of University of Kashan and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The aerodynamic performance of unmanned aerial vehicles (UAV) can be improved by optimizing the surface flow characteristics over a wide range of angle of attack (AoA) through novel mechanisms. Recently, the bioinspired camber morphing concept has received greater attention because of the proven ability of nature species towards the retention of aerodynamic performance under different environmental conditions. In particular, birds like Eagles (Accipitriformes) increase their wing camber in the course of flight to achieve maximum climbing altitude with good manoeuvring capability. The biomimetic designs such as the corrugated bone structure of Eel fish (Anguilliformes) helps to achieve the wing camber morphing with optimal aerodynamic load distributions. The present work is focused on the bioinspired variable camber morphing (VCM) strategy to enhance the flow control behaviour and aerodynamic forces for a specific UAV wing configuration at various AoA. Here, NACA 4412 airfoil is used as a baseline wing configuration and the camber morphing mechanisms which are derived through Eel fish and Eagle are analysed. The model with Eagle wing morphing (EWM) mechanism is considered as a primary case of VCM and Eel fish's corrugated structure is taken as a secondary case of VCM model. The coefficient of lift (C L ), coefficient of drag (C D ), coefficient of pressure (C p ) and endurance factor are estimated for both morphed and baseline wing configurations through high fidelity numerical simulations. Interestingly, it is observed that the EWM wing configuration has excellent surface flow control characteristics than the CSM wing configuration and the results are presented with a detailed discussion. [ABSTRACT FROM AUTHOR]

This study introduces a novel strategy for developing reversible thermochromic fluorescent films by precisely controlling the nanoscale proximity of boron nitride quantum dots and curcumin molecules within a poly(3-hydroxybutyrate) matrix. The synergistic interaction and Förster resonance energy transfer between these fluorophores result in an energy transfer efficiency of ∼94%. This approach enables tunable color changes in response to temperature variations, governed by the segmental mobility of polymer chains. Practical applications of these films as temperature sensors for water bottles and electronic devices are demonstrated, highlighting their potential in temperature monitoring, smart packaging, and thermal management systems. [ABSTRACT FROM AUTHOR]