Search

Fixing palmar ulnar corner fragments of distal radial fractures can be challenging. We described the palmar ulnar corner fragment morphology in a retrospective cohort study of 40 patients who underwent preoperative wrist computed tomography scans. Palmar ulnar corner fractures were categorized based on articular cross-sectional area, sagittal angulation relative to the radius long axis, palmar cortical length, radioulnar width and associated palmar radiocarpal subluxation. Three types emerged: type 1 fragments involved 37% (SD 10) of the radiocarpal articular surface and were extended in the sagittal plane; type 2 fragments involved 28% (SD 10) of the articular surface and had a long palmar cortex, of which 57% had palmar carpal subluxation; and type 3 fragments involved 13% (SD 2) of the articular surface, had a short palmar cortex and all had palmar carpal subluxation. Understanding palmar ulnar corner fragment morphology may guide optimal reduction and fixation strategy and prevent palmar radiocarpal subluxation, especially in type 3 fractures. Level of evidence IV., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

This study aimed to determine the effects of virtual fracture care (VFC) on secondary healthcare utilization in non-operative treatment of adult patients with a distal radial fracture. A retrospective cohort study was performed, including those who received non-operative treatment without VFC (pre-VFC) and with VFC (VFC). Outcomes included secondary healthcare utilization, calculated treatment costs, emergency department (ED) reattendances and complication rates. In total, 88 pre-VFC and 99 VFC patients were included. Pre-VFC patients had more follow-up appointments, with a median of 4 (IQR: 3) versus a median of 4 (IQR: 1) in VFC patients. In addition, 3% of follow-up appointments for pre-VFC patients were performed remotely compared to 18% for VFC patients. Complications and ED reattendances were comparable between groups. In this study, non-operative treatment of adult patients with a distal radial fracture through VFC reduced secondary healthcare utilization, with similar reported complication and ED reattendance rates compared with treatment without VFC. Level of evidence: III., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The aim of the study was to evaluate the results of Dorsal Wrist Plating in intra-articular distal radius fractures with a dorsal displacement. In this prospective study, a single surgeon treated 20 patients with a (partially) intra-articular distal radius fracture with a dorsal rim avulsion or a dorsal Barton's type fragment. They all underwent an open reduction and internal fixation by Dorsal Wrist Plating. A total of 17 patients had a follow-up period of at least 12 months (mean follow- up of 17 months) and these patients were included in the study. Both functional and radiological outcome parameters were measured. The total range of motion was 92 % of the contralateral side. The mean grip strength and key pinch were 24.6 kg and 6.9kg respectively compared to 29.5 kg and 7.4 kg on the non-operated side. The average Mayo Wrist Score was 89.7 (range 80-100) and the mean Disability of the Arm, Shoulder and Hand score was 4.5 (range 0-9.2). An articular step-off was only noted in 2 patients (1 and 2 mm respectively). Radial inclination was restored in all patients. Palmar tilt was anatomically restored in five patients. In all other patients, the palmar tilt was acceptably restored. There was no significant radial shortening in any of the patients. No infections, no tendon ruptures, no Complex Regional Pain Syndrome, or union problems were observed. Dorsal wrist plating seems to be a safe and reliable procedure in the treatment of intra-articular distal radius fractures with dorsal displacement.

The aim of the present study was to explore the incidence of corrective osteotomies after conservatively treated distal radial fracture and the risk for late correction depending on the patient's age. Based on data from the Finnish National Care Register of Health Care, Specialist Care, on all corrective osteotomies carried out in Finland during 2015-2019 in adults aged ≥20 years, we calculated the mean annual incidence rates per 100,000 person-years, standardized with the European Standard Population 2013. Using multivariable logistic regression, we calculated the risk of corrective osteotomies in various age groups. In total, 41,418 distal radial fractures were identified. Of those, 10,577 received surgical treatment in the acute phase. The incidence rate of primary operations for distal radial fractures was 47.9 per 100, 000 person-years. A total of 321 conservatively treated fractures needed corrective osteoteomy, with a surprisingly low mean annual incidence rate of 1.5 per 100,000 person-years. The risk for this was highest in patients in their fourth or fifth decade. Level of evidence: III., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

We assessed the radiological and functional results of pediatric both-bone forearm diaphyseal fractures treated using elastic stable intramedullary nails (ESINs), as well as factors affecting the results. In total, 36 patients (33 males and three females; mean age, 11.6 years) were included. The mean follow-up time was 41.5 (18-96) months. Patient demographic characteristics and the details of the surgical techniques were analyzed retrospectively. In addition to standard radiographic evaluations, the ratio between the nail diameter and medullary canal diameter (ND/MCD) was measured, as well as the maximal radial bowing. According to the criteria of Price and Flynn, 28 (77.8%) and eight (22.2%) patients had excellent and good results, respectively. There were no cases of nonunion or delayed union. There was no significant difference in functional or radiological results according to whether titanium nails (24 patients) or stainless steel nails (12 patients) were used (all P  > 0.05). Nail prebending (performed in 19 patients) did not affect the functional or radiological results ( P  > 0.05). Loss of reduction was observed in four patients with an ND/MCD ratio <40%. The maximal radial bowing improved in all patients. The mean change was significantly greater in patients with diastases and 22D/4.1 fractures. Regardless of nail type or prebending status, surgery using ESIN placement effectively treats both-bone forearm diaphyseal fractures; radial bow remodeling outcomes are excellent. We recommend that the ND/MCD ratio should be 40-70%., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Distal radius fractures are the most common upper extremity injury. Patients referred to safety-net tertiary facilities following a fracture experience significant delays in treatment because of financial and language barriers as well as poor access to care at outlying community hospitals. This delay in treatment can affect postoperative functional outcomes and complication rates because of failure to restore anatomic alignment. The purpose of this multicenter study was to assess for risk factors associated with delayed fixation of distal radius fractures and evaluate the impact of delayed treatment on radiographic alignment. Patients with a distal radius fracture treated surgically during a 2-year period were identified. Measures included time from injury to surgery, demographic information, fracture classification, and radiographic parameters. The effect of surgery delay on radiographic outcomes was assessed with delayed surgery defined as 11 or more days out from injury. A total of 183 patients met study inclusion criteria. Medicaid and indigent patients were more likely to experience a delay in surgical treatment. Specifically, 70% of these patients were treated in a delayed fashion. Delayed treatment of 11 days or more was associated with worse radial height and inclination on postoperative radiographic imaging. Medicaid and indigent patients are more likely to experience delayed fixation in the treatment of distal radius fractures. This delayed surgery negatively affects postoperative radiographic outcomes. These findings suggest a need to improve access to care for Medicaid and indigent patients and to proceed with operative intervention within 10 days for distal radius fractures. [ Orthopedics . 2024;47(2):e93-e97.].

The aim of this study was to assess bone healing and secondary fracture displacement after corrective osteotomy of the distal radius without any cortical contact using palmar locking plates without bone grafting. Between 2009 and 2021, 11 palmar corrective osteotomies of extra-articular malunited distal radius fractures and palmar plate fixations without the use of bone grafts and without cortical contact, were assessed. All patients showed complete osseous restoration and significant improvement in all radiographic parameters. Except for one patient, there were no secondary dislocations or loss of reduction in the postoperative follow-up. Bone grafts may not be mandatory for bone healing and prevention of secondary fracture displacement after palmar corrective osteotomy without cortical contact and fixation with palmar locking plate. Level of evidence: IV., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

The purpose of this study was to compare outcomes between percutaneous K-wire reduction cast immobilization (PKRC) and percutaneous K-wire reduction elastic intramedullary nailing combined with cast immobilization (PKRNC) for the treatment of radial neck fractures in children. This was a retrospective analysis of 62 radial neck fractures in children treated with PKRC or PKRNC. Thirty-one children were treated with percutaneous K-wire reduction, K-wire removal after reduction, and cast immobilization while 31 radial neck fractures in controls were managed using PKRNC. There were no significant differences between PKRC and PKRNC with regard to preoperative angulation ( P  = 0.556). The operation time in the PKRC group was significantly shorter than that of the PKRNC group ( P  = 0.023). There was no significant difference in the displacement angle when compared between the two groups on the first day and 1 month after surgery ( P  = 0.617, 0.72). The Mayo elbow performance score of the elbow joint function did not differ significantly between the two groups ( P  = 0.587). Although the hospital stay was not significantly different between groups (4.81 ± 1.07 vs. 4.16 ± 1.59 days; P  = 0.067), the PKRNC group required a second hospitalization to remove the elastic intramedullary nail 3 months after the operation. PKRC and PKRNC both achieved satisfactory outcomes for radial neck fractures in children. The operation time in the PKRC group was significantly lower than in the PKRNC group. PKRC does not require reoperation to remove internal fixation. Therefore, PKRC is recommended for radial neck fractures in children., (Copyright © 2023 The Author(s). Published by Wolters Kluwer Health, Inc.)

Purpose: To show a correlation between grade of physeal closure and fracture pattern in adolescent transitional distal radius fractures., Methods: A retrospective chart review was performed of 490 distal radius fractures, ages 14 to 18, at a single institution between 2007 and 2020. A board-certified orthopaedic hand surgeon reviewed all images. Thirty-six distal-radius fractures were considered adolescent transitional fractures. The review included Salter-Harris classification, fracture fragments, and grade of physeal closure., Results: Distal radial physeal closure is 50 times more likely to be of a higher grade in the presence of Salter-Harris type IV fractures ( P <0.001). Closure of the physis is also 7.37 and 13.08 times more likely to be of higher grade in the absence of a dorsal metaphyseal fracture and in the presence of an ulnar corner fracture, respectively ( P =0.011 and 0.021)., Conclusion: Adolescent transitional fractures of the distal radius occur when the growth plate has a partial closure. The closure pattern of the distal radial physis begins centrally, with subsequent ulnar and then radial closure. In this cohort, there is a correlation between grade of physeal closure and fracture pattern in adolescent transitional distal radius fractures., Level of Evidence: Level IV-diagnostic., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Introduction: After surgical fixation of distal radius fractures, many patients are keen to return to driving. There are however limited guidelines assisting surgeons. The aims of this study were to determine when patients could return to driving safely after distal radius fracture fixation and determine the clinical parameters (range of motion and grip strength) that patients needed to achieve before return to safe driving could be advised., Materials and Methods: A prospective grant-funded clinical study was conducted. Patients above the age of 21 years who underwent surgical fixation with a volar plate, possessed a class 3 standard motorcar license, and were regular drivers were recruited in a single institution from 2017 to 2019. A hand surgeon and an occupational therapist who sees routine hand therapy cases, assessed the patients at regular intervals from 2 to 12-weeks post-surgery. Clinical parameters of pain, wrist range of motion and grip strength were measured. Patients underwent off and on-road driving assessments., Results: A total of 26 patients were recruited, with 21 successfully completing the driving assessment. Median time post-surgery to passing the driving test was 6 and 8-weeks for off and on-road assessments respectively. Pain score was observed to decrease over time, with a significant decrease from week 2 to week 4. Range of motion improved over time, with maximal improvement between 2 to 4-weeks post-surgery. When compared with the unaffected wrist, the difference in pronation, supination and radial deviation in the affected hand was consistently no longer statistically significant 4 to 6-weeks post-surgery., Conclusion: Patients with isolated surgically treated distal radius fractures can be recommended for a driving assessment as early as 4-6 weeks post-surgery if pain control is adequate, and clinical parameters for pronation and supination are met., Competing Interests: Conflict of interest The authors declare that they have no conflict of interest., (Copyright © 2023. Published by Elsevier B.V.)

Background: There are clear standards for when to operate on both distal epiphyseal and diaphyseal forearm fractures in children. However, paediatric surgeons are often faced with fractures in the transition zone between metaphysis and diaphysis. This aim of the study is to compare different treatment approaches for diametaphyseal forearm fractures, to classify different types of these fractures, and to define further assessment parameters and treatment recommendations., Methods: This retrospective study included all patients with diametaphyseal radial fractures who were seen at a paediatric surgery clinic between 01.01.2010 and 31.12.2013. Patients were treated either non-surgically (C) or surgically using bicortical Kirschner wire (BC-KW), intramedullary K-wire (IM-KW), elastic stable intramedullary nailing (ESIN), or combined bicortical and intramedullary K-wire (BCIM-KW)., Results: During the study period, 547 patients presented with forearm fractures of which 88 patients (16%) had a fracture in the diametaphyseal region. The majority of diametaphyseal fractures were greenstick fractures (54.4%) followed by transverse fractures (44.3%). Distal fractures were predominantly treated with bicortical K-wiring (BC-KW, 40.5%) or non-surgically (C, 26.2%). Proximal fractures were treated by ESIN osteosynthesis (50%), followed by IM-KW (30%). Intermediate fractures were just as likely to be treated with one out of the 5 above-mentioned techniques. The ulna was involved in 64 of 88 cases. Depending on the type of fracture, it was treated either by ESIN osteosynthesis or non-surgically. No superior operative technique was identified., Conclusions: The description of diametaphyseal fractures as a separate entity is important, because the therapy of these fractures is heterogeneous and challenging. A classification into proximal, intermediate, and distal may be useful in clinical decision-making. Despite the retrospective nature of this study, our data suggest that the use of a K-wire or combined technique BCIM-KW-technique, whenever technically feasible, achieves better radiological results without secondary dislocation. Further prospective studies are needed to provide better guidance to trauma surgeons., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Preoperative planning is generally performed to simulate the process of reduction as well as to determine the size and placement of implants in patients undergoing distal radius fracture surgery. We previously described a three-dimensional (3D) digital preoperative planning system for the osteosynthesis of distal radius fractures, and we have developed a novel intraoperative referencing system that superimposes preoperative planning (such as plate position and length) onto fluoroscopic images during surgery; however, its efficacy has not been evaluated compared with conventional planning and surgery., Questions/purposes: Does use of a novel intraoperative referencing system result in (1) better Mayo wrist scores at 3 and 6 months after surgery and (2) less loss of reduction in terms of ulnar variance, palmar tilt, and radial inclination on plain radiographs taken 1 week, 3 months, and 6 months after surgery compared with conventional preoperative planning?, Methods: Between April 2014 and October 2021, we treated 294 patients with open reduction and volar plate fixation for distal radius fractures. Of 294 patients, 65% (191) underwent surgery using either conventional preoperative planning or a novel intraoperative referencing system. The remaining patients were excluded because they were younger than 18 years, they had some missing medical records related to the clinical outcomes, or they had a previous history of upper extremity injuries. During that time, we generally treated fractures with volar plates when there was: more than 2 mm of stepoff/gap in the articular surface, a dorsal tilt more than 15°, radial inclination less than 15°, or radial shortening more than 5 mm. Generally, we used a flexor carpi radialis approach. In some patients who had dorsal fragments, we added a dorsal approach. At that time, we were developing the new intraoperative referencing system, so it was not used consistently. To arrive at a fair assessment, we opted to perform propensity matching based on age, gender, and AO fracture type. During the period in question, 36% (69 of 191) of patients with distal radius fractures who received a volar plate were treated using our novel intraoperative referencing system, and 64% (122 of 191) had surgery using conventional preoperative planning (control group). Of those, 91% (63 of 69) of patients who were treated with the intraoperative referencing system and 89% (108 of 122) of those in the control group were available for follow-up with all imaging and Mayo wrist scores at least 6 months after surgery. After propensity matching, that left us with two groups of 39 patients, who were well matched in terms of age and fracture type; these were the study groups. We also tried to match them according to gender, but there were fewer patients in the intraoperative referencing group, and the percentage of women for each group differed: 70% (44 of 63) in the intraoperative referencing group and 76% (82 of 108) in the control group. Also, there were fewer men with C3 fractures in the control group. Therefore, 64% (25 of 39) of patients in the intraoperative referencing group were women and 77% (30 of 39) of patients in the control group were women. In the intraoperative referencing group, our novel intraoperative referencing system was used in combination with the 3D digital preoperative planning system for preoperative planning. In the control group, preoperative planning was performed manually in a conventional manner using tracing paper and implant templates or using a digital template. We compared the groups in terms of operative duration, the radiation dose used in surgery, and Mayo wrist scores at 3 and 6 months after surgery. We also compared the groups in terms of loss of reduction on ulnar variance, palmar tilt, and radial inclination on plain radiographs taken 3 months and 6 months after surgery. We considered the plain radiograph taken 1 week after surgery as a baseline. Each item was compared between the image fusion and control groups using a Welch t - test., Results: Mayo wrist scores were no different between the intraoperative referencing system and the control group at 3 months (71 ± 7 versus 72 ± 11, mean difference 1 [95% CI -3.7 to 5.7]; p = 0.07) or at 6 months after surgery (76 ± 6 versus 79 ± 11, mean difference 3 [95% CI -3.5 to 7.9]; p = 0.12). There were no differences in surgical duration or radiation doses between the intraoperative referencing and control groups. We found only a small advantage in favor of the intraoperative referencing system in terms of loss of reduction on ulnar variance (3 months after surgery: 0.2 ± 0.4 mm versus 0.6 ± 0.7 mm, mean difference 0.4 mm [95% CI 0.15 to 0.69]; p = 0.003, 6 months after surgery: 0.4 ± 0.6 mm versus 0.8 ± 0.8 mm, mean difference 0.4 mm [95% CI 0.05 to 0.73]; p = 0.02 for the intraoperative referencing system and the control group, respectively). This difference in radial shortening was so small that it was not likely to have been clinically important., Conclusion: We found no clinically important advantages from the use of our novel intraoperative referencing system except a slight improvement in ulnar variance. Therefore, we recommend against its use in everyday practice at this time. However, future improvements may lead to better clinical outcomes, so we plan further investigations., Level of Evidence: Level III, therapeutic study., Competing Interests: Each author certifies that there are no funding or commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article related to the author or any immediate family members. All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research ® editors and board members are on file with the publication and can be viewed on request., (Copyright © 2023 by the Association of Bone and Joint Surgeons.)

Objectives: The authors report no conflict of interest.To determine if short-term immobilization with a rigid long arm plaster elbow splint after surgery of the arm, elbow, or forearm results in superior outcomes compared with a soft dressing with early motion., Design: Prospective Randomized Control Trial., Setting: Academic Medical Center., Patient Selection Criteria: Patients undergoing operative treatment for a mid-diaphysis or distal humerus, elbow, or forearm fracture were consented and randomized according to the study protocol for postoperative application of a rigid elbow splint (10-14 days in a plaster Sugar Tong Splint for forearm fracture or a Long Arm plaster Splint for 10-14 for all others) or soft dressing and allowing immediate free range of elbow and wrist motion (range of motion [ROM])., Outcome Measures and Comparisons: Self-reported pain (visual analog score or VAS), Healthscale (0-100, 100 denoting excellent health), and physical function (EuroQol 5 Dimension or EQ-5D) surveyed on postoperative days 1-5 and 14 were compared between groups. Patient-reported pain score (0-10, 10 denoting highest satisfaction) at week 6, time to fracture union, ultimate disabilities of the arm, shoulder, and hand score, and elbow ROM were also collected for analysis. Incidence of complications were assessed., Results: Hundred patients (38 men to 62 women with a mean age of 55.7 years) were included. Over the first 5 days and again at postop day 14, the splint cohort reported a higher "Healthscale" from 0 to 100 than the nonsplint group on all study days ( P = 0.041). There was no difference in reported pain between the 2 study groups over the same interval ( P = 0.161 and 0.338 for least and worst pain, respectively), and both groups reported similar rates of treatment satisfaction ( P = 0.30). Physical function ( P = 0.67) and rates of wound problems ( P = 0.27) were similar. Additionally, the mean time to fracture healing was similar for the splint and control groups (4.6 ± 2.8 vs. 4.0 ± 2.2 months, P = 0.34). Ultimate elbow ROM was similar between the study groups ( P = 0.48, P = 0.49, P = 0.61, and P = 0.51 for elbow extension, flexion, pronation, and supination, respectively)., Conclusions: Free range of elbow motion without splinting produced similar results compared with elbow immobilization after surgical intervention for a fracture to the humerus, elbow, and forearm. There was no difference in patient-reported pain outcomes, wound problems, or elbow ROM. Immobilized patients reported slightly higher "healthscale" ratings than nonsplinted patients and, however, reported similar rates of satisfaction. Both treatment strategies are acceptable after upper extremity fracture surgery., Level of Evidence: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence., Competing Interests: The authors report no conflict of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: The aim of this study is to assess the rate of distal ulnar growth arrest following physeal fracture and to identify specific risk factors for premature physeal closure., Methods: A retrospective review of patients with a distal ulnar physeal fracture was performed at a single United States children's hospital. Patients without 6-month follow-up were excluded. Patient demographics, injury characteristics, treatment, and outcomes were abstracted. Fractures were classified by the Salter-Harris (SH) system. All follow-up radiographs were reviewed for changes in ulnar variance or signs of premature physeal arrest., Results: Fifty-six children with distal ulnar physeal fracture at a mean age of 10.7±3.3 years were included with a mean follow-up of 1.9 years. The most common fracture pattern was a SH II (52.7%), versus SH I (29.1%), SH III (9.1%), and SH IV (9.1%). Of displaced fractures (41.1%), the mean translation was 40.2±38.3% the and mean angulation was 24.8±20.9 degrees. Eleven fractures (19.6%) demonstrated radiographic signs of growth disturbance, including 3 patients (5.4%) with growth disturbance but continued longitudinal growth and 8 patients (14.3%) with complete growth arrest. The average ulnar variance was -3.4 mm. Three patients underwent subsequent surgical reconstruction including ulnar lengthening with an external fixator, distal ulna completion epiphysiodesis with distal radius epiphysiodesis, and ulnar corrective osteotomy. Patients with displaced fractures and SH III/IV fractures were more likely to develop a growth disturbance (34.8% vs. 3.2%, P =0.003; 50.0% vs. 11.1%, P =0.012, respectively). Children with less than 2 years of skeletal growth remaining at the time of injury had a higher risk of growth disturbance (46.2% vs. 9.5%, P =0.007)., Conclusions: SH III and IV fractures are more common injury patterns in the distal ulna compared with the distal radius. Growth disturbance or growth arrest occurs in ~20% of distal ulnar physeal fractures. Displaced fractures, intra-articular fractures, fractures requiring open reduction, and older children are at increased risk of distal ulnar growth arrest and should be followed more closely., Level of Evidence: Level IV--case series., Competing Interests: The authors declare no relevant conflicts of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Background: Current methods of anaesthesia used for closed reduction of distal radial fractures may be insufficient for pain relief and muscle relaxation, potentially compromising reduction quality and patient satisfaction. Peripheral nerve blocks have already been implemented for surgery of wrist fractures and may provide optimal conditions for closed reduction due to complete motor and sensory blockade of the involved nerves. However, existing literature on peripheral nerve blocks for closed reduction is sparse, and no updated systematic review or meta-analysis exists., Aims: This protocol is developed according to the PRISMA-P statement. The systematic review and meta-analysis aim to consolidate the literature regarding the effect and harm of peripheral nerve blocks compared with other anaesthesia modalities for closed reduction of distal radius fractures in adults., Methods: The two primary outcomes are the proportion of participants needing surgery after closed reduction and pain during closed reduction. We will only include randomised clinical trials. Two review authors will each independently screen literature, extract data, and assess risk of bias with Risk of Bias 2 Tool. Meta-analysis will be carried out with Rstudio. We will also perform a Trial Sequential Analysis. The certainty of evidence will be judged using GRADE guidelines., Discussion: We will use up-to-date methodology when conducting the systematic review outlined in this protocol. The results may guide clinicians in their decision-making regarding the use of anaesthesia for closed reduction of distal radius fractures in adults., (© 2023 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.)

This is a retrospective case series of patients with distal radius fractures treated with an indirect coronal reduction technique previously described by the senior author using volar locking plates. Seventeen distal radius fractures underwent treatment at a Level I Trauma Center and were retrospectively reviewed for anatomic alignment, surgical complications, and wrist range of motion in the global period. Near-anatomic restoration was achieved with the average radial inclination, radial height, and volar tilt measured as 23.2 ± 3.9 degrees, 11.8 ± 2.1 degrees, and 8.5 ± 5.4 degrees, respectively. Average coronal translation was 2.8 ± 2.7 mm. Postoperative wrist motion on average was within the normal ranges for pronation, supination, wrist flexion, and wrist extension at an average of 36 weeks follow-up. There were no complications related to surgical technique or implant. This case series demonstrates the reliability for coronal reduction with a volar locking plate technique without complications. (Journal of Surgical Orthopaedic Advances 33(1):037-040, 2024).

Background: Terrible triad injury is a complex injury of the elbow, involving elbow dislocation with associated fracture of the radial head, avulsion or tear of the lateral ulnar collateral ligament, and fracture of the coronoid. These injuries are commonly managed surgically with fixation or replacement of the radial head and repair of the collateral ligaments with or without fixation of the coronoid. Postoperative mobilization is a significant factor that may affect patient outcomes; however, the optimal postoperative mobilization protocol is unclear. This study aimed to systematically review the available literature regarding postoperative rehabilitation of terrible triad injuries to aid clinical decision making., Methods: We systematically reviewed the PubMed, Embase, Cochrane, and CINAHL (Cumulative Index to Nursing and Allied Health Literature) databases in accordance with Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. The inclusion criteria were studies with populations aged ≥16 years with terrible triad injury in which operative treatment was performed, a clear postoperative mobilization protocol was defined, and the Mayo Elbow Performance Score (MEPS) was reported. Secondary outcomes were pain, instability, and range of motion (ROM). Postoperative mobilization was classified as either "early," defined as active ROM commencement before or up to 14 days, or "late," defined as active ROM commencement after 14 days., Results: A total of 119 articles were identified from the initial search, of which 11 (301 patients) were included in the final review. The most common protocols (6 studies) favored early mobilization, whereas 5 studies undertook late mobilization. Meta-regression analysis including mobilization as a covariate showed an estimated mean difference in the pooled mean MEPS between early and late mobilization of 6.1 (95% confidence interval, 0.2-12) with a higher pooled mean MEPS for early mobilization (MEPS, 91.2) than for late mobilization (MEPS, 85; P = .041). Rates of instability reported ranged from 4.5% to 19% (8%-11.5% for early mobilization and 4.5%-19% for late mobilization)., Conclusion: Our findings suggest that early postoperative mobilization may confer a benefit in terms of functional outcomes following surgical management of terrible triad injuries without appearing to confer an increased instability risk. Further research in the form of randomized controlled trials between early and late mobilization is advised to provide a higher level of evidence., (Copyright © 2023 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Purpose: We evaluated the 1-year postoperative clinical and patient-reported outcomes in patients who had a 3-dimensional planned corrective osteotomy of their distal radius, radial shaft, or ulnar shaft using a printed, anatomical, patient-tailored plate to determine the feasibility and effectiveness of this methodology., Methods: Simulations in computer-assisted preoperative planning of corrective osteotomies resulted in 3-dimensionally printed surgical guides, surgical models, and anatomically customized plates for application at the distal radius and forearm. Patients with malunions of the distal radius or forearm who underwent fixation with the custom-made plates were documented in our registry. Grip strength and range of motion assessments were made before surgery (baseline), as well as at 6 weeks and 3 and 12 months. Additionally, patients rated their wrist-related pain and disability using the Patient-Rated Wrist Evaluation., Results: Fifteen patients underwent corrective surgery, and the 1-year follow-up data of 14 patients with a median age of 56 years (interquartile range, 24-64 years) were available for analysis. The median baseline Patient-Rated Wrist Evaluation score improved from 47 to 7 after 1 year. The flexion-extension arc of motion of the wrist increased from 90° at baseline to 130° at 1 year and the pronation-supination arc of motion of the wrist increased from 135° to 160° in the same time period. Differences in radiological measurements for palmar and radial inclinations, as well as for ulnar variance between the affected and contralateral wrists, were reduced with the osteotomy. In 1 case, the plate was removed 11 months after the osteotomy. No severe adverse events were reported., Conclusions: Three-dimensionally planned and printed patient-tailored plates offer a reliable method for correcting even complex malunions of the distal radius and forearm., Type of Study/level of Evidence: Therapeutic IV., (Copyright © 2024 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

In this prospective, randomized comparative study in patients with distal radial fractures, we aimed to determine whether surgical repair of the superficial head after anterior locking plate fixation of the radius improves clinical or functional outcomes or both, and distal radioulnar joint stability. One hundred patients were randomized to undergo distal radial fixation with or without repair of the superficial head. Twenty-one patients were lost to follow-up, leaving a final sample of 79 patients. No differences were observed between the groups in functional scores or complication after operation. Surgical repair of the superficial head of the pronator quadratus muscle after osteosynthesis with an anterior locking plate for distal radial fractures does not appear to substantially contribute to preserving distal radioulnar joint stability or improving the consolidation process. Level of evidence: II., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflict of interest with respect to the research, authorship, and/or publication of this article.

Anterior locking plate fixation of the distal radius is a common procedure with reliable results. Failure of fixation is sometimes seen. The aim of the present study was to identify the reasons for failure. In total, 517 cases met the study inclusion criteria. Of them, 23 cases had failure of fixation (4.4%). Failure analysis generated qualitative data. Subsequent thematic analysis identified the primary mode of failure and contributing factors. Primary modes were identified as failure to support all key fracture fragments ( n  = 20), wrong choice of implant ( n  = 1), failure of union ( n  = 1) and poor bone quality ( n  = 1). Contributing factors were errors in plate positioning, fracture reduction, implant selection and screw configuration, as well as fracture pattern complexity and poor bone quality. Most failed fixations had a primary mode and two or three contributing factors. Overall anterior plating is reliable with a low rate of surgical failure. Knowledge of failure modes will aid operative planning and prevent failure. Level of evidence: V., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

We performed an 11-13-year prospective follow-up of patients after a distal radial fracture (DRF) to investigate the association between fracture malunion, radiocarpal osteoarthritis and clinical outcome. In total, 292 patients responded to patient-reported outcome measures; of them, 242 underwent clinical examination. Clinical outcomes improved with time. A decade after fracture, median Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) score was 5, EuroQol Five-dimensions score was 1.0, and range of motion and grip strength were 96% of the contralateral side. Neither osteoarthritis (6%) nor pseudoarthrosis of the ulnar styloid (30%) affected the outcomes. Dorsal tilt, radial inclination, ulnar variance and intra-articular extension did not affect long-term clinical outcomes or the risk of osteoarthritis. Recovery after a DRF is an ongoing process that lasts years. A decade after the injury event, range of motion, grip strength and QuickDASH were recovered to population normal, regardless of radiological outcomes. Level of evidence: II., Competing Interests: Declaration of conflicting interestsThe authors declare no potential conflicts of interest with respect to the research, authorship, or publication of this article.

We compared patient satisfaction and clinical effectiveness of 3D-printed splints made of photopolymer resin to conventional fibre glass casts in treating distal radial fractures. A total of 39 patients with minimally displaced distal radius fractures were included and randomized. Of them, 20 were immobilized in a fibre glass cast and 19 in a 3D-printed forearm splint. The 3D-printed splints were custom-designed based on forearm surface scanning with a handheld device and printed in-house using digital light processing printing technology. Patient satisfaction and clinical effectiveness were assessed with questionnaires 1 and 6 weeks after the initiation of immobilization. Fracture healing, pain, range of motion, grip strength and the DASH and PRWE scores were assessed up to 1-year follow-up. 3D-printed splints proved to be equally well tolerated by the patients and equally clinically effective as conventional fibre glass casts although there was a higher rate of minor complications. 3D-printed splints present a safe alternative, especially in young, active patients, for non-operative treatment of distal radial fractures. Level of evidence: I., Competing Interests: Declaration of conflicting interestsThe authors declared the following potential conflicts of interest with respect to the research, authorship, and or publication of this article: Our research group was supported by the company Spentys© (Spentys SA/NV, Brussels, BE) with printing material and technical support (see funding). There is no participation of Spentys© in study design, collection/management/analysis/interpretation of data or writing of the report.

Background: Radial neck fractures account for 5-17% of elbow fractures and about 1% of all fractures in children. The subject of the presented research is assesment of clinical and radiological outcomes of the Metaizeau technique for treatment of isolated radial neck fractures in children., Material and Methods: Retrospective analysis of clinical and radiological data of patients treated with the Metaizeau technique in our Department between 2015 and 2020. Twenty children with isolated radial neck fracture met the inclusion criteria., Results: Excellent outcomes of operative treatment were achieved in 95% of children. None of the complications described in the literature (e.g. avascular necrosis of radial head (AVN), malunion, nonunion) were observed in our case series., Conlcusions: 1. The Metaizeau technique for reduction and stabilisation of the radial neck fracture using a TEN is a safe and effective method in the paediatric population and produces good clinical and radiological results. 2.Furthermore, the minimal demands it places on surgical equipment make it possible for this technique to be recommended to orthopaedic surgeons managing paediatric trauma patients.

Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H801 ).

Background: Three-dimensional (3D) preoperative planning is increasingly used in orthopaedic surgery. Two-dimensional (2D) characterization of distal radial deformities remains inaccurate, and 3D planning requires a reliable reference frame at the wrist. We aim to evaluate the reliability of the determination of anatomical points placed manually on 3D models of the radius to determine which of those points allow reliable morphometric measurements., Methods: Twenty-three radial scans were reconstructed in 3D. Five operators specialized in the upper limb manually positioned 8 anatomical points on each model. One of the operators repeated the operation 6 times. The anatomical points were based on previously published 3D models used for radial inclination and dorsopalmar tilt measurements. The repeatability and reproducibility of the measurements derived using this manual landmarking were calculated using different measurement methods based on the identified points. An error of ≤2° was considered clinically acceptable., Results: This study of intraobserver and interobserver variability of the anatomic points allowed us to determine the least variable and most accurately defined points. The middle of the ulnar border of the radius, the radial styloid, and the midpoint of the ulnar incisura of the radius were the least variable. The palmar and dorsal ends of the ridge delineating the scaphoid and lunate facets were the most variable. Only 1 of the radial inclination measurement methods was clinically acceptable; the others had a repeatability and reproducibility limit of >2°, making those measurements clinically unacceptable., Conclusions: The use of isolated points seems insufficient for the development of a wrist reference frame, especially for the purpose of measuring dorsopalmar tilt. If one concurs that an error of 2° is unacceptable for all distal radial measurements, then clinicians should avoid using 3D landmarked points, due to their unreliability, except for radial inclination measured using the radial styloid and the midpoint of the ulnar edge of the radius. A characterization of the wrist using 3D shapes that fit the articular surface of the radius should be considered., Level of Evidence: Diagnostic Level III . See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H783 )., (Copyright © 2023 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: This study evaluates the association between ICUC trauma and short-form Disabilities of the Arm, Shoulder, and Hand Questionnaire (Quick DASH) scores among patients who underwent surgery for distal radius fractures., Methods: This research gathered patient-reported outcomes (PROs) from patients registered in the ICUC database at a single trauma center. The study involved 76 adult patients who underwent surgical treatment for distal radius fractures before 2023. These patients received a volar locking plate for their distal radius fracture. The research utilized two different PROs to evaluate the patients' conditions. The ICUC trauma score measures functional impairment and pain through two 5-point scale questions, allowing patients to self-assess these aspects. The Quick DASH, comprising 11 questions, was used to evaluate symptoms and functionality of the upper extremity., Results: For patients aged 55.9 ± 15.3 years and 4.6 ± 3.9 years post-op follow-up, the ICUC trauma score was 0.70 ± 0.95, and Quick DASH was 6.07 ± 10.35. A strong correlation between ICUC and Quick DASH was identified (r = 0.71, P < 0.01). The interaction between the ICUC trauma score and age at the surgery to Quick DASH revealed a significant unstandardized partial regression coefficient of 0.19 (95% confidence interval 0.08-0.31; P < 0.01)., Conclusion: This study demonstrated a strong correlation between the ICUC trauma score and the Quick DASH among patients, especially the elderly. It was noted that an elevation in the ICUC trauma score is linked to a more marked increase in the Quick DASH score, particularly in older patients. Given its simplicity and efficacy, the ICUC trauma score may be a viable alternative to the Quick DASH for assessing the patient's clinical outcomes., (© 2024. The Author(s).)

Forearm rotation restriction (FRR) is common after surgery for distal radius fractures (DRFs). The aim of the current study was to investigate the effect of DRFs on forearm rotation. This retrospective study reviewed patients with DRFs who underwent surgical treatment from January 2019 to December 2021. The patients' basic data and radiographic parameters were analyzed. Forearm rotation, including pronation and supination, was assessed using a standard goniometer. The Patient-Rated Wrist Evaluation (PRWE) score was evaluated, and the incidence of FRR at the 6-month follow-up was recorded. Univariate and multivariate logistic regression analyses were performed to identify risk factors correlated with FRR. A total of 127 patients with DRFs were included in this study. After surgery, 46 cases were considered to have FRR, with a rate of 36.2%, while the remaining 81 cases (63.8%) did not have FRR. The PRWE scores were 22.8 ± 5.2 and 17.9 ± 4.2 in the FRR group and non-FRR group, respectively, and the difference was statistically significant (P < 0.05). Multivariate analysis showed that the involvement of the sigmoid notch (OR, 2.88; 95% CI 1.49-5.56), post-operative volar tilt < 0° (OR, 2.16; 95% CI 1.34-3.50), and post-operative ulnar variance > 0 mm (OR, 1.37; 95% CI 1.06-1.78) were independently associated with the incidence of FRR. The FRR is associated with an increased PRWE score and may have had some impact on the patient's daily life. Fractures involving the sigmoid notch, dorsal angulation, and radial shortening deformity were found to be correlated with the incidence of FRR. Preoperative risk notification and intraoperative preventive measures are necessary for these patients., (© 2024. The Author(s).)

Background: Although isolated distal radius and radial head fractures are common injuries, simultaneous ipsilateral fractures are uncommon. They can range from simple undisplaced fractures at either end to severely comminuted ipsilateral proximal and distal radial fractures. Few cases have been reported with concomitant comminuted distal radius and radial head fractures, and no treatment guidelines are available. Decisions are often based on personal recommendations. The purpose of our study is to increase awareness of this injury pattern and to discuss the mechanism of injury, treatment approach, and functional outcome., Methods: Skeletally mature patients with comminuted simultaneous ipsilateral fractures of the distal and proximal radius from 2016 to 2021 were identified and studied retrospectively. Demographic information, mechanism of injury, treatment approach, and complication rate were analyzed. Radiographic assessment for inadequacy or loss of reduction and radiographic parameters of the distal radius, including radial inclination, radial length, and palmar inclination, was performed immediately postoperatively and at the final follow-up. Clinical outcomes were determined by calculating the Visual Analog Scale (VAS) score, measuring the range of motion in both joints, and using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) score at the final follow-up., Results: A total of 11 patients met the inclusion criteria. All had ipsilateral Mason III radial head fractures and type C (according to the Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification) intra-articular distal radius fracture. On-table radial head reconstruction and fixation with a proximal radius plate were used for radial head fractures, and osteosynthesis with an anatomic volar locking plate was used for distal radius fractures. The mean follow-up duration was 32 months (range 12-65 months). At the final follow-up, osseous union of both the radial head and distal radius was observed in all patients. The mean VAS score was 1.5 (range 0-7) at rest and 3.9 (range 0-9) with activities, while the mean QuickDASH score was 32 (range 12-65). No significant complications were recorded., Conclusion: Simultaneous comminuted fractures of the ipsilateral distal radius and radial head represent a distinct injury pattern, most likely resulting from high-energy trauma, such as falling from a height onto an outstretched hand. Greater emphasis should be placed on clinical examination and radiological imaging of the elbow in cases of wrist injuries and vice versa. Treatment involving on-table reconstruction of the radial head and open reduction and internal fixation with a volar plate can lead to good radiological and functional outcomes.

Purpose: The purpose of this study was to report the incidence of infection after conversion from external fixation (EF) to internal fixation (IF) of distal radius fractures and to evaluate the relationship between infection and secondary variables, including time to conversion from EF to IF, internal hardware overlapping EF pin sites, and definitive fixation with a dorsal-spanning bridge plate., Methods: A retrospective review was performed at 2 level 1 trauma centers including all patients aged ≥18 years from 2006 to 2019 with a distal radius fracture treated initially with EF followed by subsequent IF. The patients were excluded from analysis if they had <10 weeks of clinical follow-up, a history of prior distal radius surgery, or evidence of infection before EF to IF conversion. Patient demographic data, mechanism of injury, presence of hardware overlapping pin sites, and timing to definitive fixation were obtained from the medical records. Infection was defined as positive intraoperative cultures or documented return to the operating room for debridement after IF., Results: A total of 64 fractures in 61 patients with a median age of 50 years (range, 18-75 years) were included. Infections developed in 6 patients (6 of 64 fractures). The incidence of infection was higher in patients with a time to conversion from EF to IF of >14 days (infection in 2 of 5 patients vs 4 of 59 patients). The incidence of infection was similar in patients with and without hardware overlapping EF pin sites (3 of 27 vs 3 of 37, respectively)., Conclusions: Infections occurred in 6 of 64 distal radius fractures following conversion from EF to IF, and delay in conversion of >14 days was associated with an increased infection risk., Type of Study/level of Evidence: Therapeutic IV., (Copyright © 2024 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

Forearm fractures present a unique challenge due to the anatomic relationship of the radius relative to the ulna. Associated with the complexity of the treatment for these fractures is the management of nonunion and malunion of the radius and ulna. Evaluation and management of forearm nonunions require a critical evaluation of contributing factors prior to surgical intervention. Timely and precise treatment of nonunion and malunion is necessary to restore function of the forearm., Competing Interests: Disclosure C.L. Vu has nothing to disclose. M.J. Richard is a consultant for Acumed, DJO, Bioventus Royalties, Field Orthopedics, RTI Surgical, Acumed Stock options, and restor3d., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Purpose: There is a debate whether corrective osteotomies of the distal radius should be performed using a 3D work-up with pre-contoured conventional implants (i.e., of-the-shelf) or patient-specific implants (i.e., custom-made). This study aims to assess the postoperative accuracy of 3D-assisted correction osteotomy of the distal radius using either implant., Methods: Twenty corrective osteotomies of the distal radius were planned using 3D technologies and performed on Thiel embalmed human cadavers. Our workflow consisted of virtual surgical planning and 3D printed guides for osteotomy and repositioning. Subsequently, left radii were fixated with patient-specific implants, and right radii were fixated with pre-contoured conventional implants. The accuracy of the corrections was assessed through measurement of rotation, dorsal and radial angulation and translations with postoperative CT scans in comparison to their preoperative virtual plan., Results: Twenty corrective osteotomies were executed according to their plan. The median differences between the preoperative plan and postoperative results were 2.6° (IQR: 1.6-3.9°) for rotation, 1.4° (IQR: 0.6-2.9°) for dorsal angulation, 4.7° (IQR: 2.9-5.7°) for radial angulation, and 2.4 mm (IQR: 1.3-2.9 mm) for translation of the distal radius, thus sufficient for application in clinical practice. There was no significant difference in accuracy of correction when comparing pre-contoured conventional implants with patient-specific implants., Conclusion: 3D-assisted corrective osteotomy of the distal radius with either pre-contoured conventional implants or patient-specific implants results in accurate corrections. The choice of implant type should not solely depend on accuracy of the correction, but also be based on other considerations like the availability of resources and the preoperative assessment of implant fitting., (© 2024. The Author(s).)

Although its precise added value and cost-effectiveness need to be determined, three-dimensional (3D) planning and intraoperative guidance facilitate restoration of normal anatomy. The use of 3D computer planning and patient-specific intraoperative guides leads to more accurate and reproducible correction of forearm and wrist malunion. Its value augments with increasing complexity of deformities. Combined deformities and complex intra-articular malunions of the forearm and wrist benefit the most from the use of 3D techniques. New technical developments, including lower-dose scanning technology, software improvement, artificial intelligence, and in-hospital printing, may lower the associated costs and make its application more accessible., Competing Interests: Disclosure G.A. Buijze and A. Verstreken declare no potential conflicts of interest with respect to the research, authorship, and/or publication of this article. F. Verstreken receives royalties from Materialise NV, Leuven, Belgium., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Objective: This study aimed to evaluate the effectiveness of a 3D-printed hands-on radius fracture model for teaching courses. The model was designed to enhance understanding and knowledge of radius fractures among medical students during their clinical training., Methods: The 3D models of radius fractures were generated using CT scans and computer-aided design software. The models were then 3D printed using Fused-Filament-Fabrication (FFF) technology. A total of 170 undergraduate medical students participated in the study and were divided into three groups. Each group was assigned one of three learning aids: conventional X-ray, CT data, or a 3D-printed model. After learning about the fractures, students completed a questionnaire to assess their understanding of fracture mechanisms, ability to assign fractures to the AO classification, knowledge of surgical procedures, and perception of the teaching method as well as the influence of such courses on their interest in the specialty of trauma surgery. Additionally, students were tested on their ability to allocate postoperative X-ray images to the correct preoperative image or model and to classify them to the AO classification., Results: The 3D models were well received by the students, who rated them as at least equal or better than traditional methods such as X-ray and CT scans. Students felt that the 3D models improved their understanding of fracture mechanisms and their ability to explain surgical procedures. The results of the allocation test showed that the combination of the 3D model and X-ray yielded the highest accuracy in classifying fractures according to the AO classification system, although the results were not statistically significant., Conclusion: The 3D-printed hands-on radius fracture model proved to be an effective teaching tool for enhancing students' understanding of fracture anatomy. The combination of 3D models with the traditional imaging methods improved students' ability to classify fractures and allocate postoperative images correctly., (© 2023. The Author(s).)

Background: An update on the epidemiology of distal radius fractures in the United States is necessary, particularly as the elderly population grows. Additionally, age and frailty have been associated with complications following surgical fixation of DRFs. Herein, we utilize the National Trauma Data Bank, a robust nationwide resource, to investigate the relationship between demographics, comorbidities, injury and fracture characteristics, and admission details., Methods: Patients with isolated distal radius fractures were identified from the National Trauma Data Bank (2016-2019) according to ICD-10 codes. Univariate and multivariate regressions were conducted to determine independent risk factors for bilateral fractures, displaced fractures, open fractures, as well as length of hospital stay and adverse discharge disposition for patients undergoing inpatient surgical fixation., Results: The incidence of DRFs was 3.6/1,000 trauma-related emergency department visits and 10.8/1,000 upper extremity traumas. Trauma mechanism was significantly associated with displaced and open fractures. Age (OR 1.01, 95% CI 1.01-1.01), BMI (OR 1.02, 95% CI 1.01-1.02), smoking (OR 1.34, 95% CI 1.15-1.57), and alcohol level (trace: OR 2.18, 95% CI 1.41-3.29; intoxicated: OR 2.20, 95% CI 1.63-2.95) were significantly associated with open fractures. Machinery (β=2.04, 95% CI 1.00-3.08) and MVT (β=0.39, 95% CI 0.08-0.69) mechanisms were independent risk factors for longer length of stay. mFI-5 was an independent risk factor, in a stepwise fashion, for both length of stay and adverse discharge disposition., Conclusions: High-energy mechanisms and risk factors for poor skin quality were significantly associated with open fractures. mFI-5 was an independent risk factor for longer length of stay and non-routine discharges in patients of all ages, despite controlling for other comorbidities, unrelated complications, and mechanism of injury. Trauma mechanism was an independent risk factor for prolonged length of stay only, particularly in patients younger than 65 years of age., Competing Interests: Declaration of Competing Interest None, (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Purpose: To evaluate the outcomes of adding arthroscopy to osteosynthesis of distal radius fractures (DRF) with volar locking plate (VLP), by Patient-Rated Wrist Evaluation (PRWE) 1 year after surgery., Methods: In total, 186 functionally independent adult patients who met the inclusion criteria (DRF and a clinical decision for surgery with a VLP) were randomized to arthroscopic assistance or not. Primary outcome was PRWE questionnaire results 1 year after surgery. For the main variable, PRWE, we obtained the minimal clinically important difference based on a distribution-based method. Secondary outcomes included Disabilities of the Arm, Shoulder and Hand and 12-Item Short Form Health Survey questionnaires, range of motion, strength, radiographic measures, and presence of joint step-offs by computed tomography. Data were collected preoperatively and at +1 and +4 weeks, +3 and +6 months, and +1 year after surgery. Complications were recorded throughout the study., Results: In total, 180 patients (mean age: 59.0 ± 14.9 years; 76% women) were analyzed by modified intention to treat. A total of 82% of the fractures were intra-articular (AO type C). No significant difference between arthroscopic (AG) and control (CG) groups in median PRWE was found at +1 year (median AG: 5.0, median CG: 7.5, difference in medians 2.5; 95% confidence interval [CI] -2.0, 7.0, P = .328). The proportion of patients who exceeded the minimal clinically important difference of 12.81 points in the AG and CG was 86.4% vs 85.1%, P = .819, respectively. Percentage of associated injuries and step-offs reduction maneuvers was greater with arthroscopy (mean differences: 17.1 95% CI -0.1, 26.1, P < .001) and 17.4 (95% CI 5.0, 29.7, P = .007). The difference in percentage of residual joint step-offs at the postsurgical computed tomography in radioulnar, radioscaphoid, and radiolunate joints was not significant (P = .990, P = .538, and P = .063). Complications were similar between groups (16.9% vs 20.9%, P = .842)., Conclusions: Adjuvant arthroscopy did not significantly improve PRWE score +1 year after surgery for DRF with VLP, although the statistical power of the study is below the initially estimated to detect the expected difference., Level of Evidence: Level I, randomized controlled trial., (Copyright © 2023 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Intra-articular malunion of the distal radius represents a difficult clinical problem. While not all patients require treatment, corrective osteotomy may significantly improve motion, grip strength, and patient-reported outcome measures. Meticulous planning and technical precision are required with the possible need for multiple surgical approaches and both volar and dorsal implants. Arthroscopic assistance may be used to visualize the joint and articular reduction. Custom 3-dimensional planning guides are helpful in addressing complex multiplanar deformities. Regardless, intervention may not change the natural history of these injuries and post-traumatic arthritis is to be expected., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Aims: Acute and chronic injuries of the interosseus membrane can result in longitudinal instability of the forearm. Reconstruction of the central band of the interosseus membrane can help to restore biomechanical stability. Different methods have been used to reconstruct the central band, including tendon grafts, bone-ligament-bone grafts, and synthetic grafts. This Idea, Development, Exploration, Assessment, and Long-term (IDEAL) phase 1 study aims to review the clinical results of reconstruction using a synthetic braided cross-linked graft secured at either end with an Endobutton to restore the force balance between the bones of the forearm., Methods: An independent retrospective review was conducted of a consecutive series of 21 patients with longitudinal instability injuries treated with anatomical central band reconstruction between February 2011 and July 2019. Patients with less than 12 months' follow-up or who were treated acutely were excluded, leaving 18 patients in total. Preoperative clinical and radiological assessments were compared with prospectively gathered data using range of motion and the abbreviated version of the Disabilities of the Arm, Shoulder and Hand questionnaire (QuickDASH) functional outcome score., Results: Of the 18 patients (nine male, nine female) who met the inclusion criteria, the median follow-up was 8.5 years (interquartile range (IQR) 5.6 to 10). Their mean age was 49 years (SD 11). The mean extension improved significantly from 38° (SD 15°) to 24° (SD 9°) (p = 0.027), with a mean flexion-extension arc change from 81° (SD 27°) to 93° (SD 30°) (p = 0.172) but with no forearm rotational improvement (p = 0.233) at latest follow-up. The QuickDASH functional score improved significantly from 80 (SD 14) to 52 (SD 26) following reconstruction (p = 0.031), but generally the level of disability remains high. Radiological assessment showed no progression of proximal migration of the radius, with a stable interbutton distance and ulnar variance from immediate postoperative radiograph to the latest follow-up., Conclusion: Central band interosseus membrane reconstruction using a synthetic braided cross-linked graft can improve patient-rated arm function and range of motion, but significant functional deficits remain in patients with chronic injuries., Competing Interests: None declared., (© 2024 The British Editorial Society of Bone & Joint Surgery.)

Distal radius fractures are common injuries. Satisfactory outcomes are typically achieved with appropriate nonoperative or operative treatment. A proportion of these injuries develop symptomatic malunions, which may be treated surgically with distal radius corrective osteotomy. A thorough understanding of the anatomy, biomechanics, radiographic parameters, and indications is needed to provide appropriate treatment. Factors, including surgical approach, osteotomy type, use of bone graft, fixation construct, management of associated tendon and/or nerve conditions, soft tissue contracture releases, and need for ulnar-sided procedures, should be considered. A comprehensive evaluation is necessary to guide understanding for when salvage procedures may be preferred., (Published by Elsevier Inc.)

The aim of this article is to review the evaluation and management of pediatric forearm malunions. Acceptable parameters for nonoperative management of pediatric forearm fractures are reviewed, followed by clinical and imaging workups of malunions and decision-making points for treatment. The landscape of available technology for planning and execution of corrective osteotomy is discussed. Several cases of pediatric forearm malunion are presented, along with surgical and functional outcomes. Recommendations are given regarding the authors' preferred approach for management of pediatric forearm malunions., Competing Interests: Disclosure The authors have nothing to disclose., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: Volar plate malpositioning in the treatment of distal radial fracture can lead to tendinitis or even tendon tear, especially when the plate position is very distal. We studied the impact of design on plate position in the distal radius. The primary aim was to compare the position of six volar wrist plates relative to the watershed line using the Soong classification. The secondary objectives were to assess the epidemiology of volar locking plate fixation within the administrative Département of Finistère (northwestern France) and to study whether the type of fracture played a role in plate position., Hypothesis: The plate design itself influences positioning relative to the watershed line on the Soong classification., Materials and Methods: A total of 2723 volar locking plate fixation cases were analyzed and categorized according to the Soong classification. Plates used were divided into six groups based on design: Zimmer Biomet®, Newclip Technics®, Stryker®, Synthes®, Medartis® and Medartis® Footprint. The number of Soong 0 + 1 plates (i.e., plates graded 0 and 1 taken together) was determined for each design, then compared using the Marascuilo procedure with a significance level of α = 0.05., Results: On the Marascuilo procedure, we found significant differences in the number of Soong grade 0 + 1 plates. The Zimmer Biomet and Newclip Technics® plates were significantly more often proximal to the watershed line than the Synthes and Medartis Footprint plates. Plate position with the Medartis® design was significantly more proximal to the watershed line than for its companion design, the Medartis® Footprint plate. The rate of volar locking plate fixation of distal radial fractures over the past 10 years increased in Finistère. Also, the type of fracture affected the choice of plate when different designs were available within a hospital center (Medartis® Footprint plate used in 2R3A fractures)., Conclusion: Our study highlights a significant difference in volar locking plate position relative to the watershed line between the various models available. Plate design is a deciding factor when treating distal radial fracture, to avoid impingement when implant removal is not routinely planned., (Copyright © 2023 SFCM. Published by Elsevier Masson SAS. All rights reserved.)

Ulnar styloid fractures commonly occur in the setting of distal radius fractures and often progress to asymptomatic nonunion. Displaced basilar ulnar styloid fractures involving the deep radioulnar ligament attachments may cause distal radioulnar joint (DRUJ) instability. A careful clinical history, physical examination, review of imaging studies, and selected diagnostic interventions are important for confirming the relationship of the ulnar styloid nonunion with ulnar-sided wrist symptoms and/or DRUJ instability. Improved functional and symptomatic outcomes can be achieved with nonunion repair or fragment excision with or without triangular fibrocartilage complex repair, depending on the location and size of the ulnar styloid fracture., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Introduction: Both bone forearm fractures are common injuries in children. Most can be treated with reduction and casting. Those that fail nonoperative management can be treated with a plate or intramedullary fixation; however, refracture remains a problem. The goal of this study is to evaluate the refracture rate in both bone forearm fractures based on the mode of fixation., Methods: Institutional board review approval was obtained. A retrospective chart review from 2010 to 2021 at a single tertiary care institution was conducted for all operative patients <18 years who sustained a both bone forearm fracture. Groups were stratified based on initial operative fixation type: both bones fixated using nails, 1 bone fixated with a nail; both bones plated, and 1 bone plated. Further review was conducted to identify refractures following initial operative treatment. Statistical analyses were conducted using the χ 2 test of independence and Fisher's exact test., Results: In all, 402 operatively treated both bone forearm fracture patients were identified. Two hundred fifty-six of these patients underwent intramedullary fixation (average age 10.3y/o), while 146 patients received plate fixation (average age 13.8y/o). Fracture location was similar across the nailing and plating cohorts, most often occurring in the mid-shaft region. Patients aged ≤10 years refractured at a significantly higher rate than patients aged >10 years across all operative fixation cohorts (12.5% vs. 2.5%, P <0.001). Among the 256 patients who underwent intramedullary fixation, 61.3% had both bones treated (n=157/256), whereas 38.7% received single bone fixation (n=99/256). Of the 146 plate fixations, 84.4% had both bones fixed (n=123/146), and only 15.8% were treated with single bone fixation (n=23/146). In the intramedullary group, 15 patients sustained refractures, 11 of whom were treated with single bone fixation (11.1%, n=11/99) versus 4 with both both fixation (2.5%, n=4/157). Among the plating group, 7 patients sustained refractures, 6 with both bone fixation (4.9%, n=6/123) and 1 in single bone fixation (4.3%, n=1/23). Refractures were found to be significantly more prevalent among patients treated with single bone compared with both bone intramedullary nail fixation (11.1% vs. 2.5%, P =0.006). By fixated bone, single bone ulna fixations had a higher refracture rate compared with both bone fixations (12.1% vs. 3.6%, P =0.003)., Conclusion: The overall refracture rate following operative treatment of both bone fractures is 5.5% and is similar between intramedullary and plate fixations. Overall, patients ≤10 years of age had a higher rate of refracture. Among single bone fixations, higher refracture was seen with intramedullary fixations, and when the radius was treated nonoperatively. Surgeons may be able to reduce the refracture rate by performing intramedullary fixation of both bones instead of only one bone. Effective postoperative counseling among younger patients may also decrease refracture rates., Competing Interests: The authors declare no conflicts of interest., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Purpose: It is generally accepted that a radial head fracture (RHF) with more than three parts is not suitable for repair; therefore, most authors suggest straightforward radial head arthroplasty (RHA). With up to 20% risk for reoperation after RHA, improvement in reduction and fixation techniques may represent a valuable alternative before further extending the indications for arthroplasty. To determine the functional results and radiological failure rate after osteosynthesis of multi-fragmentary RHF with more than three articular fragments. We specifically determined (1) the one-year Broberg and Morrey functional elbow score, (2) duration of fracture healing, (3) complication rate, and (4) number of patients converted to RHA., Methods: This study is a retrospective single-center case series. All patients who underwent primary osteosynthesis for RHF between 2012 and 2019 were included. Nine patients with an average age of 52 years had an average clinical and/or radiological follow-up of 49 months., Results: The preoperative imaging identified nine fractures with four fragments. Three patients underwent osteosynthesis with plates and screws, whereas six patients underwent osteosynthesis with only screws. The mean Broberg and Morrey score was 95 points. Overall, eight of the nine patients had satisfactory results. All patients retained their radial heads and showed radiological fracture healing. Only two patients presented with low-grade complications requiring no further surgery., Conclusion: Our study showed that osteosynthesis of RHF with up to four fragments can achieve good functional results with a low complication rate and seems to be a valid alternative to RHA., (© 2023. The Author(s).)

Background: Recently, deep learning techniques have been used in medical imaging studies. We present an algorithm that measures radiologic parameters of distal radius fractures using a deep learning technique and compares the predicted parameters with those measured by an orthopedic hand surgeon., Methods: We collected anteroposterior (AP) and lateral X-ray images of 634 wrists in 624 patients with distal radius fractures treated conservatively with a follow-up of at least 2 months. We allocated 507 AP and 507 lateral images to the training set (80% of the images were used to train the model, and 20% were utilized for validation) and 127 AP and 127 lateral images to the test set. The margins of the radius and ulna were annotated for ground truth, and the scaphoid in the lateral views was annotated in the box configuration to determine the volar side of the images. Radius segmentation was performed using attention U-Net, and the volar/dorsal side was identified using a detection and classification model based on RetinaNet. The proposed algorithm measures the radial inclination, dorsal or volar tilt, and radial height by index axes and points from the segmented radius and ulna., Results: The segmentation model for the radius exhibited an accuracy of 99.98% and a Dice similarity coefficient (DSC) of 98.07% for AP images, and an accuracy of 99.75% and a DSC of 94.84% for lateral images. The segmentation model for the ulna showed an accuracy of 99.84% and a DSC of 96.48%. Based on the comparison of the radial inclinations measured by the algorithm and the manual method, the Pearson correlation coefficient was 0.952, and the intraclass correlation coefficient was 0.975. For dorsal/volar tilt, the correlation coefficient was 0.940, and the intraclass correlation coefficient was 0.968. For radial height, it was 0.768 and 0.868, respectively., Conclusions: The deep learning-based algorithm demonstrated excellent segmentation of the distal radius and ulna in AP and lateral radiographs of the wrist with distal radius fractures and afforded automatic measurements of radiologic parameters., Competing Interests: CONFLICT OF INTEREST: No potential conflict of interest relevant to this article was reported., (Copyright © 2024 by The Korean Orthopaedic Association.)