Search

This paper describes a transient thermography method to measure the heat loss of parabolic trough receivers and separate their heat loss mechanisms. This method is complementary to existing stationary techniques, which use either energy balances or glass envelope temperature measurements to derive overall heat losses. It is shown that the receiver heat loss can be calculated by applying a thermal excitation on the absorber tube and measuring both absorber tube and glass envelope temperature signals. Additionally, the emittance of the absorber selective coating and the vacuum quality of the annulus can be derived. The benefits and the limits of the transient method are presented and compared to the established stationary method based on glass envelope temperature measurements. Simulation studies and first validation experiments are described. A simulation based uncertainty analysis indicates that an uncertainty level of approximately 5% could be achieved on heat loss measurements for the transient method introduced in this paper, whereas for a conventional stationary field measurement technique, the uncertainty is estimated to 17-19%. [ABSTRACT FROM AUTHOR]

The construction of solar thermal power plants with several thousand m² of collector area requires quality control measures for components, subsystems, and the entire collector rows. While quality control has a significant potential to increase the solar field efficiency, the main objective is to assure high-quality standards for the whole solar field. Quality control, assembly documentation, and performance measurements are required by the investors. Based on previous R&D work in collector development and prototype qualification, measurement systems have been developed for use in solar field construction and operation supervision. In particular, close-range photogrammetry can be used to measure the geometry of collector steel structures. The measurement system consists of a digital camera, which moves around the structure automatically while shooting photos of the concentrator structure from various positions. The photos are evaluated with photogrammetry software to check the assembly quality. The whole measurement and evaluation procedure is computer controlled and is fast enough to be integrated in a solar collector production line. This paper deals with the required measurement accuracy and shows ways to reach, maintain, and control this accuracy in the rough environment of an on-site production line. [ABSTRACT FROM AUTHOR]