Search

Bacterial cellulose (BC) nanofibers were acetylated to enhance the properties of optically transparent composites of acrylic resin reinforced with the nanofibers. A series of BC nanofibers acetylated from degree-of-substitution (DS) 0 to 1.76 were obtained. X-ray diffraction profiles indicated that acetylation proceeded from the surface to the core of BC nanofibers, and scanning electron microscopy images showed that the volume of nanofibers increases by the bulky acetyl group. Since acetylation decreased the refractive index of cellulose, regular transmittance of composites comprised of 63% BC nanofiber was improved, and deterioration at 580 nm because of fiber reinforcement was suppressed to only 3.4%. Acetylation of nanofibers changed their surface properties and reduced the moisture content of the composite to about one-third that of untreated composite, although excessive acetylation increased hygroscopicity. Furthermore, acetylation was found to reduce the coefficient of thermal expansion of a BC sheet from 3 x 10(-6) to below 1 x 10(-6) 1/K.

Background: Human T-cell leukemia virus type 1 (HTLV-1) is a well-known retrovirus, particularly prevalent in northeastern Iran, where it is associated with a range of disorders, including liver dysfunction. Previous studies have demonstrated that HTLV-1 infection can alter lipid profiles, yet no research has examined lipid indices and liver function tests in these patients in the long term. Methods: This data is part of the Mashhad stroke and heart atherosclerotic disorder (MASHAD) study. A total of 1116 participants were randomly selected, including 837 healthy individuals and 279 HTLV-1-infected patients. Following a 10-year follow-up period, Serum levels of liver enzymes were measured. Lipid indices such as the Atherogenic Index of Plasma (AIP), Body Adiposity Index (BAC), Castelli risk index (CRI-I, CRI-II), Lipid Accumulation Product (LAP), Visceral Adiposity Index (VAI), Triglyceride-glucose index (TyG), and Triglyceride and HDL-C Ratio (THR) were calculated. Results: Multivariable-adjusted regression analysis demonstrated a significant coefficient for the Visceral Adiposity Index (VAI) in HTLV-infected patients compared to healthy controls (B: -0.014, 95% CI: -0.02, 0.00, p = 0.046). However, no significant differences were observed in other lipid indices between HTLV-infected patients and healthy individuals. Regarding liver enzymes, significant variations were noted in HTLV-infected patients compared to healthy controls: Aspartate Aminotransferase (AST) (B: 2.978, 95% CI: 1.34, 4.61, p < 0.001), Alanine Aminotransferase (ALT) (B: 3.687, 95% CI: 1.59, 5.78, p = 0.001), Alkaline Phosphatase (ALP) (B: 18.232, 95% CI: 6.81, 29.65, p = 0.002), and Gamma-Glutamyl Transferase (GGT) (B: 3.714, 95% CI: 0.18, 7.24, p = 0.039). Conclusion: Individuals with HTLV-1 infection exhibit reduced VAI but elevated levels of liver enzymes such as AST, ALT, ALP, and GGT, indicating liver damage. These findings emphasize the virus's involvement in liver pathology. Also, HTLV-I is associated with reduced visceral fat tissue. [ABSTRACT FROM AUTHOR]

The slowdown of Moore's Law necessitates an exploration of novel computing methodologies, new materials, and advantages in chip design. Thus, carbon-based materials have promise for more energy-efficient computing systems in the future. Moreover, sustainability emerges as a new concern for the semiconductor industry. The production and recycling processes associated with current chips present huge environmental challenges. Electronic waste is a major problem, and sustainable solutions in computing must be found. In this review, we examine an alternative chip design based on nanocellulose, which also features semiconductor properties and transistors. Our review highlights that nanocellulose (NC) is a versatile material and a high-potential composite, as it can be fabricated to gain suitable electronic and semiconducting properties. NC provides ideal support for ink-printed transistors and electronics, including green paper electronics. Here, we summarise various processing procedures for nanocellulose and describe the structure of exclusively nanocellulose-based transistors. Furthermore, we survey the recent scientific efforts in organic chip design and show how fully automated production of such a full NC chip could be achieved, including a Process Design Kit (PDK), expected variation models, and a standard cell library at the logic-gate level, where multiple transistors are connected to perform basic logic operations—for instance, the NOT-AND (NAND) gate. Taking all these attractive nanocellulose features into account, we envision how chips based on nanocellulose can be fabricated using Electronic Design Automation (EDA) tool chains. [ABSTRACT FROM AUTHOR]

Background: Limited data are available regarding the association between serum transferrin saturation (TSAT) levels and heart failure (HF). Methods: We utilized data from National Health and Nutrition Examination Survey (NHANES) 2017-2020.03 for analysis. Data on TAST, HF and covariates were extracted and analyzed. Weighted logistic regression and subgroup analysis were used to explore the independent association between TSAT and HF. Furthermore, interaction tests were also carried out to evaluate the strata differences. We subsequently assessed whether there was a non-linear relationship between the 2 using Restricted cubic spline (RCS) and threshold effect models. Result: A total of 282 (3.87%) participants were identified to have HF. Among the total population, participants with HF had significantly lower TSAT levels compared to those without HF (24.63 vs. 27.95, P = 0.001). After fully adjusting for potential confounders, weighted multiple logistic regression models revealed a 2.6% reduced in the risk of HF when each unit of TSAT increased. There was also a negative association between elevated TSAT and developed risk of HF in the quartile groups (Q1 OR:1.00; Q2 OR: 0.924 [95%CI:0.593,1.440]; Q3 OR: 0.515 [95%CI:0.298,0.891]; Q4 OR:0.411 [95%CI:0.201,0.839]). The subgroup analysis results remained consistent across strata, with a strong negative correlation between TSAT and HF. Interaction tests showed no dependence on gender, age, Body Mass Index, race, diabetes, hypertension, hyperlipidemia, ratio of family income to poverty and education for this negative association between TSAT and HF (all p for interaction >0.05). The RCS and threshold effect models indicated a linear negative correlation between TSAT and HF, which was more pronounced when TSAT under 40%. Conclusion: Overall, these findings suggest a consistent and negative association between TSAT levels and the presence of HF among middle-aged and older adults in the United States. [ABSTRACT FROM AUTHOR]

Hard anodizing is used to improve the anodic films' mechanical qualities and aluminum alloys' corrosion resistance. Applications for anodic oxide coatings on aluminum alloys include the space environment. In this work, the aluminum alloys 2024-T3 (Al-Cu), 6061-T6 (Al-Mg-Si), and 7075-T6 (Al-Zn) were prepared by hard anodizing electrochemical treatment using citric and sulfur acid baths at different concentrations. The aim of the work is to observe the effect of citric acid on the microstructure of the substrate, the mechanical properties, the corrosion resistance, and the morphology of the hard anodic layers. Hard anodizing was performed on three different aluminum alloys using three citric–sulfuric acid mixtures for 60 min and using current densities of 3.0 and 4.5 A/dm2. Vickers microhardness (HV) measurements and scanning electron microscopy (SEM) were utilized to determine the mechanical characteristics and microstructure of the hard anodizing material, and electrochemical techniques to understand the corrosion kinetics. The result indicates that the aluminum alloy 6061-T6 (Al-Mg-Si) has the maximum hard-coat thickness and hardness. The oxidation of Zn and Mg during the anodizing process found in the 7075-T6 (Al-Zn) alloy promotes oxide formation. Because of the high copper concentration, the oxide layer that forms on the 2024-T6 (Al-Cu) Al alloy has the lowest thickness, hardness, and corrosion resistance. Citric and sulfuric acid solutions can be used to provide hard anodizing in a variety of aluminum alloys that have corrosion resistance and mechanical qualities on par with or better than traditional sulfuric acid anodizing. [ABSTRACT FROM AUTHOR]

Energy storage and conversion are vital for addressing global energy challenges, particularly the demand for clean and sustainable energy. Functional organic materials are gaining interest as efficient candidates for these systems due to their abundant resources, tunability, low cost, and environmental friendliness. This review is conducted to address the limitations and challenges of conventional energy storage and conversion technologies by exploring the potential of functional organic materials. Additionally, it aims to advance knowledge in the field by providing a comprehensive overview of recent developments and future perspectives, highlighting the unique properties and potential applications of these materials. Key materials discussed include organic polymers, small molecules, and organic–inorganic hybrids, which have shown promise in battery applications, supercapacitors, and emerging technologies like organic flow batteries. For energy conversion, organic materials are explored in photovoltaic devices, such as organic solar cells, with improvements in power conversion efficiency and stability. The review also examines their potential in thermoelectric and piezoelectric energy conversion. Key challenges, including stability, scalability, and cost-effectiveness, are addressed, with strategies for enhancing performance and durability. In summary, functional organic materials offer significant promise for sustainable energy solutions, and this review highlights the recent developments and future perspectives in this dynamic field. [ABSTRACT FROM AUTHOR]

Flexible transparent electrodes (FTEs) have become a vital component of many devices such as heaters, solar cells, light-emitting diodes (LEDs), and smart windows. Recently, great endeavors have been undertaken to develop new-generation FTE materials as an alternative to conventional rigid indium tin oxide (ITO). Owing to their outstanding conductivity and flexibility, metallic nanowires have been considered as one of the most potential candidates for FTEs. This review summarizes recent advances in understanding the relationship among the dispersion uniformity of metallic nanowires, the optical and electrical properties of metallic nanowire FTEs, and the stability of devices based on metallic nanowire FTEs. Based on the importance of uniformity in FTE properties, this progress report presents strategies to enhance the uniformity of metallic nanowires for a high-performance FTE. Representative devices based on metallic nanowire FTEs with high stability and reliability are presented. [ABSTRACT FROM AUTHOR]

Aims: Fractional excretion of urea nitrogen (FEUN), used to differentiate the cause of acute kidney injury, has emerged as a useful fluid index in patients with heart failure (HF). We hypothesized that FEUN could be useful in identifying worsening renal function (WRF) associated with poor outcomes in patients with acute HF (AHF). Methods and results: Overall, 1103 patients with AHF (median age, 78 years; male proportion, 60%) were categorized into six groups according to the presence of WRF and FEUN values (low, ≤32.1%; medium, >32.1% and ≤38.0%; and high, >38.0%) at discharge. WRF was defined as an increase of ≥0.3 mg/dL in the serum creatinine level from admission to discharge. FEUN was calculated by the following formula: (urinary urea × serum creatinine) × 100/(serum urea × urinary creatinine). The cut‐off values for low, medium, and high FEUN were based on a previous study. The primary outcome of this study was HF readmission after hospital discharge. During the 1 year follow‐up, 170 HF readmissions occurred. Kaplan–Meier analysis revealed significantly higher HF readmission rates in patients with WRF than in those without WRF (log‐rank test, P < 0.001). Additionally, among patients with WRF, HF readmission rates were lowest in those with medium FEUN values, followed by those with low FEUN values and those with high FEUN values. On multivariable analysis, the presence of WRF with low or high FEUN values was independently associated with increased HF readmission, as compared with the absence of WRF with medium FEUN values. Notably, no association was noted between WRF with medium FEUN values and HF readmission. Conclusions: The prognostic impact of WRF was significantly mediated by the FEUN values and was associated with worse outcomes only when the FEUN values were either low or high. Our study suggests that FEUN can identify prognostically relevant WRF in patients with AHF. [ABSTRACT FROM AUTHOR]

Several inflammatory cytokines bind to the allosteric site (site 2) and allosterically activate integrins. Site 2 is also a binding site for 25-hydroxycholesterol, an inflammatory lipid mediator, and is involved in inflammatory signaling (e.g., TNF and IL-6 secretion) in addition to integrin activation. FGF2 is pro-inflammatory and pro-thrombotic, and FGF1, homologous to FGF2, has anti-inflammatory and anti-thrombotic actions, but the mechanism of these actions is unknown. We hypothesized that FGF2 and FGF1 bind to site 2 of integrins and regulate inflammatory signaling. Here, we describe that FGF2 is bound to site 2 and allosterically activated β3 integrins, suggesting that the pro-inflammatory action of FGF2 is mediated by binding to site 2. In contrast, FGF1 bound to site 2 but did not activate these integrins and instead suppressed integrin activation induced by FGF2, indicating that FGF1 acts as an antagonist of site 2 and that the anti-inflammatory action of FGF1 is mediated by blocking site 2. A non-mitogenic FGF1 mutant (R50E), which is defective in binding to site 1 of αvβ3, suppressed β3 integrin activation by FGF2 as effectively as WT FGF1. [ABSTRACT FROM AUTHOR]

The research results and evaluation of the applicability of the original composition of hybrid paper based on silver nanowires (AgNWs), cellulose pulp (CP), and carbon nanotubes (CNTs) are presented and discussed. The material tested was used to manufacture sensors for mechanical deformation resulting from external influences or related to human activity interactions. The sensors were fabricated using an AgNWs + CP suspension and additives by the vacuum filtration method. The substrate obtained was machined and then laminated with a layer of poly(dimethylsiloxane) (PDMS). The recorded responses to selected types of imposed mechanical interactions in the form of changes in the relative resistance of the sensor throughout the tests showed a close cause-and-effect relationship. The response of the tested systems when applying an alternating magnetic field was also observed. The results indicate that the proposed solutions can find application in the monitoring of mechanical interactions resulting from the dynamic behavior of physical objects, as well as derived from selected human vital functions. [ABSTRACT FROM AUTHOR]

Flexible organic solar cells (FOSCs) represent a promising and rapidly evolving technology, characterized by lightweight construction, cost-effectiveness, and adaptability to various shapes and sizes. These advantages render FOSCs highly suitable for applications in diverse fields, including wearable electronics and building-integrated photovoltaics. The application scope of FOSCs necessitates electrodes with properties such as high optical transmittance, low electrical resistivity, and exceptional mechanical strength, where their selection significantly influences the overall device performance. This review explores several materials, focusing on polymers, carbon nanomaterials, and metal nanowires, highlighting their unique advantages and challenges in FOSC applications. Through this thorough review, we would like to elucidate the relationship between electrode materials and device performance, thereby inspiring further improvements and developments in FOSCs and broadening their application range. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the effectiveness of trimethylsilane (TMS) plasma nanocoatings in protecting silver nanowires (AgNWs) from degradation and thus to improve their stability. TMS plasma nanocoatings at various thicknesses were deposited onto AgNWs that were prepared on three different substrates, including glass, porous styrene-ethylene-butadiene-styrene (SEBS), and poly-L-lactic acid (PLLA). The experimental results showed that the application of TMS plasma nanocoatings to AgNWs induced little increase, up to ~25%, in their electrical resistance but effectively protected them from degradation. Over a two-month storage period in summer (20–22 °C, 55–70% RH), the resistance of the coated AgNWs on SEBS increased by only ~90%, compared to a substantial increase of ~700% for the uncoated AgNWs. On glass, the resistance of the coated AgNWs increased by ~30%, versus ~190% for the uncoated ones. When stored in a 37 °C phosphate-buffered saline (PBS) solution for 2 months, the resistance of the coated AgNWs on glass increased by ~130%, while the uncoated AgNWs saw a ~970% rise. Increasing the TMS plasma nanocoating thickness further improved the conductivity stability of the AgNWs. The nanocoatings also transformed the AgNWs' surfaces from hydrophilic to hydrophobic without significantly affecting their optical transparency. These findings demonstrate the potential of TMS plasma nanocoatings in protecting AgNWs from environmental and aqueous degradation, preserving their electrical conductivity and suitability for use in transparent electrodes and wearable electronics. [ABSTRACT FROM AUTHOR]

This study focussed on the development of fully biodegradable composites based on polybutylene succinate (PBS) in combination with raw materials from different processing stages of the pulp and paper industry. Sulfite pulp (SP), kraft pulp (KP) and screened sludge residue (SL) from wastewater treatment plants (WWTP) were investigated as reinforcing fibres contributing to a circular economy. We report a comparative study of the physicochemical properties and mechanical performance of PBS composites reinforced with these cellulosic raw fibres and commercial pure microcrystalline cellulose (MC). The composites were characterised in tensile strength, elongation at break, modulus of elasticity, water absorption and wettability. The incorporation of the fibres into the polymer matrix was also investigated using torque rheometry. Critical concentrations were obtained with maximum incorporation in the range of 15–20 wt% for SP/KP and 25–30 wt% for SL. SP and KP composites showed at least as good physicochemical and mechanical properties as MC at the concentrations studied (0–20 wt%). SP-composites showed the highest tensile strength and modulus of elasticity. It was shown that these fibres from the pulp and paper industry can be used as reinforcement for PBS matrices without additional chemical purification and provide a valuable alternative to commercial microcrystalline cellulose. [ABSTRACT FROM AUTHOR]

This study aims to investigate the combined effect of Sc micro-alloying and applying low-frequency electromagnetic casting (LFEC) on precipitation behavior, mechanical and corrosion properties of 7A36 aluminum alloy. The results indicate that when compared to the T6 state, the two-stage over-aging (T73) treatment causes the transformation of the grain interior η′ phases into coarser η′ and η phases and leads to a more distinct appearance of precipitate free zone (PFZ). The addition of Sc results in the discontinuous and coarser formation of grain boundary precipitates (GBPs), and the Al3(Sc, Zr) phase particles contributes to the increased strength of 7A36 aluminum alloy. LFEC promotes the finer second phase and a finer distribution of grain interior precipitates, and dislocation movement bypasses a shorter distance and less energy is consumed, thus strength is decreased slightly. Meanwhile, the wider PFZ and the greater distribution spacing of the coarse GBPs contribute to a smaller intergranular fracture tendency, that's improve elongation of T6 and T73 alloys by 56.4% and 22.5% respectively, and contribute to improve corrosion resistance by blocking of intergranular corrosion channels. Based on the precipitation evolution, the synergy mechanism of Sc micro-alloying and LFEC processing is put forward in this paper. [ABSTRACT FROM AUTHOR]

Technological advances have accelerated the pursuit of transparent conducting thin films (TCFs) with superior mechanical properties, durability, efficient optoelectrical performance and substrate compatibility as a pivotal focus in the realm of flexible transparent electronics. Against this background, this work investigates the fabrication of multilayer silver nanowire (AgNW) thin films reinforced by zinc tin oxide (ZTO) thin film encapsulation on polycarbonate substrates by a combination of sputtering and spin-coating techniques. An investigation of the influence of AgNW percolation networks on the optoelectrical properties of ZTO/AgNW/ZTO hybrid thin films was carried out. The impact of ZTO protective layers on the enhancement of electrical properties, adhesivity, flexibility and environmental stability of the multilayer TCF was elucidated. Additionally, to explore the compatibility of the fabricated TCF in integrated device and stealth applications, its electromagnetic interference shielding properties were investigated. The hybrid TCF showed 99.47% EMI shielding efficiency with an absorption-dominant EMI shielding effectiveness of 22.7 dB in the x-band region. [ABSTRACT FROM AUTHOR]

In this study, we present a novel method for fabricating semi-transparent electrodes by combining silver nanowires (AgNW) with titanium nitride (TiN) layers, resulting in conductive nanocomposite coatings with exceptional electromechanical properties. These nanocomposites were deposited on cellulose nanopaper (CNP) using a plasma-enhanced pulsed laser deposition (PE-PLD) technique at low temperatures (below 200 °C). Repetitive bending tests demonstrate that incorporating AgNW into TiN coatings significantly enhances the microstructure, increasing the electrode's electromechanical robustness by up to four orders of magnitude compared to commercial PET/ITO substrates. Furthermore, the optical and electrical conductivities can be optimized by adjusting the AgNW network density and TiN synthesis temperature. Our results also indicate that the nanocomposite electrodes exhibit improved stability in air and superior adhesion compared to bare AgNW coatings. [ABSTRACT FROM AUTHOR]

This paper presents two control design strategies for voltage regulation in a single inductor dual-output DC-DC buck converter system. Based on a nominal multiple input multiple output plant model and performance requirements, both a Linear Quadratic Regulator and a Decoupled PI control law are designed to control the power converter system under parametric uncertainties such as voltage source variation, constant power load variation, and load resistance variation. Therefore, the converter can cascade operation, which may cause the undesired effects of voltage oscillation and reduce the system's stability margin. The control performance was assessed under both the uncertainties of resistive loading and the power variation in a constant power load. A single inductor dual-output DC-DC buck converter board was developed for experimental tests. The experimental results show that the Linear Quadratic Regulator strategy, compared to the PI strategy, presented a robust performance in the presence of parametric uncertainties in the resistive load-bearing; however, it was sensitive to uncertainties due to the presence of constant power loads. [ABSTRACT FROM AUTHOR]

In this paper, gold and Moringa oleifera leaf nanoparticles were synthesized using laser ablation techniques by Nd-YAG laser with a wavelength of 1064 nm, energy of 100 mJ, and a frequency of 3 Hz. The gold sheet and Moringa oleifera leaf tablets (after grind it then being compressed and exposed to heat) immersed in 5 ml of distilled water for each one individually to synthesis nanoparticles as a first step. The second step was synthesis of Core@shell from gold and Moringa nanoparticles with different pulse numbers (250,500, and 750) pulse where gold was used as the core and Moringa as the shell and vice versa. The prepared samples were characterized using UV-VIS spectrophotometer, as well as transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results show the success of the techniques used where the particles size was between (50 - 100) nm. The linear properties of the prepared samples showed an absorption peak of nano gold and moringa at (520 and 420) nm respectively. For Au@Mo and Mo@Au prepared samples the absorption peak increased and shifted toward long wavelength (red shift). [ABSTRACT FROM AUTHOR]

Lignin is an inexpensive bio-adsorbent and has many applications in the adsorption of heavy metals. The structure and size of the lignin molecular chain affect its properties. Introducing of amino functional groups to the structure of lignin can improve its physical and chemical properties and increase its reactivity and adsorption power. Lignin cross-linking also improves its performance and adsorption characteristics. In the first step, lignin as a black liquor was extracted and purified from the waste of the wood factory. The lignin was then reacted with phenol to obtain lignophenol. The obtained lignophenol was then aminated via reacting with the ethylene diamine. Finally, in order to increase the strength of the adsorbent structure and prevent the dissolution of the adsorbent at low pHs (suitable for adsorption), 37% aqueous formaldehyde was added to the aminated lignin, from which aminated and cross-linked lignophenol was then obtained. Different types of lignins including lignin, lignophenol and amine-functionalized (branched or cross-linked) lignophenol were well synthesized and identified. The results of FT-IR spectrum showed that the amine functional groups were well attached to the lignophenol branches and the lignophenol was converted to the amino-containing lignophenol. Also, the results of acid–base titration and 11HNMR show that phenol was successfully bonded onto the lignin and amine functional groups were observed in lignin structure. The results of acid–base titration, elemental analysis and zeta potential tests also confirmed amination of lignophenol. [ABSTRACT FROM AUTHOR]

With the increasing global demand for net-zero carbon emissions, actions to address climate change have gained momentum among policymakers and the public. The urgent need for a sustainable economy is underscored by the mounting waste crisis in landfills and oceans. However, the proliferation of distributed electronic devices poses a significant challenge due to the resulting electronic waste. To combat this issue, the development of sustainable and environmentally friendly materials for these devices is imperative. Cellulose, an abundant and CO2-neutral substance with a long history of diverse applications, holds great potential. By integrating electrically interactive components with cellulosic materials, innovative biobased composites have been created, enabling the fabrication of bulk electroactive paper and the establishment of new, potentially more sustainable manufacturing processes for electronic devices. This review explores recent advances in bulk electroactive paper, including the fundamental interactions between its constituents, manufacturing techniques, and large-scale applications in the field of electronics. Furthermore, it addresses the importance and challenges of scaling up production of electroactive paper, highlighting the need for further research and development. [ABSTRACT FROM AUTHOR]

Background: Heart failure with preserved ejection fraction (HFpEF) is a multifactorial condition with a variety of pathophysiological causes and morphological manifestations. The inclusion criteria and patient classification have become overly simplistic due to the customary differentiation regarding the ejection fraction (EF) cutoff. EF is considered a measure of systolic function; nevertheless, it only represents a portion of the true contractile state and has been shown to have certain limits due to methodological and hemodynamic irregularities. Methods: As a result, broader randomized clinical trials have yet to incorporate the most recent criteria for HFpEF diagnosis, leading to a lack of data consistency and confusion in interpreting the results. The primary variations between the bigger clinical trials published in this context concerning patient selection and echocardiographic characteristics were analyzed. For all these reasons, we aim to clarify the main features and clinical impact of HFpEF in a study combining imaging, bio-humoral analysis, and clinical history to identify the specific subgroups that respond better to tailored treatment. Results: Disparate clinical characteristics and a lack of uniform diagnostic standards may cause suboptimal therapeutic feedback. To optimize treatment, we suggest shifting the paradigm from the straightforward EF measurement to a more comprehensive model that considers additional information, such as structural traits, related disorders, and biological and environmental data. Therefore, by evaluating certain echocardiographic and clinical factors, a stepwise diagnostic procedure may be useful in identifying patients at high risk, subjects with early HFpEF, and those with evident HFpEF. Conclusions: The present assessment underscores the significance of the precision medicine approach in guaranteeing optimal patient outcomes by providing the best care according to each distinct profile. [ABSTRACT FROM AUTHOR]

In this study, the electrical properties and stability of silver nanowire transparent conductive electrodes (TCEs) were improved through the platinum electroplating process (AgNWs@Pt TCEs). After electroplating, environmental and thermal stabilities increased considerably, whereas sheet resistance was greatly reduced. Sheet resistance sharply decreased from 181.3Ω/□ to 16.59 Ω/□. Meanwhile, the thermal stability of the AgNWs@Pt TCEs was enhanced by 20°C compared with that of TCEs based on silver nanowires. The sheet resistance of the AgNWs@Pt TCEs remained nearly constant after exposure to ambient air for five months. The optimal electroplating condition was achieved at an electroplating current of 10 µA for 30 s. Under this condition, the sheet resistance, transmittance, and figure-of-merit (FOM) values of the AgNWs@Pt TCEs were approximately 16.59 Ω/□, 83.89%, and 123 Ω-1, respectively. [ABSTRACT FROM AUTHOR]

Purpose: In power electronics, there are various metallic material systems used as die attachments. The complete understanding of the thermomechanical behavior of such interconnections is very important. Therefore, this paper aims to examine the thermomechanical response of four famous die attach materials, including sintered silver, sintered nano-copper particles, gold-tin solders and silver-tin transient liquid phase (TLP) bonds, using nonlinear finite element analysis. Design/methodology/approach: During the study, the mechanical properties of all die attach systems, including elastic and viscoplasticity parameters, are obtained from literature studies and hence incorporated into the numerical analysis. Subsequently, the bond stress–strain relationships, stored inelastic strain energies and equivalent plastic strains are thoroughly examined. Findings: The results showed that the silver-tin TLP bonds are more likely to develop higher inelastic strain energy densities, while the sintered silver and copper interconnects would possess higher plastic strains and deformations. Suggesting higher damage to such metallic die attachments. The expensive gold-based solders have developed least inelastic strain energy densities and least plastic strains as well. Thus, they are expected to have improved fatigue performance compared to other bonding configurations. Originality/value: This paper extensively investigates and compares the mechanical and thermal response of various metallic die attachments. In fact, there are no available research studies that discuss the behavior of such important die attachments of power electronics when exposed to mechanical and thermomechanical loads. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to investigate the thermomechanical response of four well-known lead-free die attach materials: sintered silver, sintered nano-copper particles, gold-tin solders and silver-tin transient liquid phase (TLP) bonds. Design/methodology/approach: This examination is conducted through finite element analysis. The mechanical properties of all die attach systems, including elastic and Anand creep parameters, are obtained from relevant literature and incorporated into the numerical analysis. Consequently, the bond stress-strain relationships, stored inelastic strain energies and equivalent plastic strains are thoroughly examined. Findings: The results indicate that silver-tin TLP bonds are prone to exhibiting higher inelastic strain energy densities, while sintered silver and copper interconnects tend to possess higher levels of plastic strains and deformations. This suggests a higher susceptibility to damage in these metallic die attachments. On the other hand, the more expensive gold-based solders exhibit lower inelastic strain energy densities and plastic strains, implying an improved fatigue performance compared to other bonding configurations. Originality/value: The utilization of different metallic material systems as die attachments in power electronics necessitates a comprehensive understanding of their thermomechanical behavior. Therefore, the results of the present paper can be useful in the die attach material selection in power electronics. [ABSTRACT FROM AUTHOR]

The article discusses the potential of artificial intelligence (AI) in improving the management of mechanical circulatory support (MCS) for patients with cardiogenic shock. The Impella device, which provides mechanical circulatory support and gathers comprehensive hemodynamic data, is highlighted as a promising tool for implementing AI techniques. However, the article emphasizes that effective AI-driven clinical decision support requires a broader dataset that includes additional clinical, functional, and laboratory data. The integration of AI in MCS management has the potential to enhance patient outcomes, but it is important to interpret AI model predictions cautiously and balance technological innovations with clinical prudence. [Extracted from the article]

Flexible optoelectronics, based on non-planar substrates, hold promise for diverse applications such as wearables, health monitors, and displays due to their cost-effective manufacturing methods. Despite the superior properties of metal oxides, the challenge of processing them at high temperatures incompatible with plastic substrates necessitates innovative annealing approaches. Photonic curing, which delivers microsecond to millisecond broadband (200–1500 nm) light pulses on a sample, emerges as a viable solution. Depending on the optical properties, the targeted film absorbs the radiant energy resulting in rapid heating while the transparent substrate absorbs a minimal amount of light and remains at ambient temperature. The light intensity can be high, but since the light pulse is short, the total energy absorbed by the sample remains low and will not damage the plastic substrate. This perspective explores the innovative application of photonic curing to fabricate flexible metal oxide optoelectronics, including thin-film transistors, metal–insulator–metal devices, solar cells, transparent conductors, and Li batteries, emphasizing the conversion of sol–gel precursors to metal oxides. However, this technique was initially developed for sintering metal nanoparticles to conductive patterns and poses intriguing challenges in explaining its mechanism for metal oxide conversion, especially considering the limited absorption of visible light by most sol–gel precursors. The review delves into UV-induced photochemistry, common flexible metal-oxide optoelectronic components, and non-intuitive distinctions between photonic curing and thermal annealing. By elucidating the distinctive role of photonic curing in overcoming temperature-related challenges and advancing the fabrication of flexible metal oxide optoelectronics, this perspective offers valuable insights that could shape the future of flexible optoelectronics. [ABSTRACT FROM AUTHOR]

Intelligent and diversified development of modern detection technology greatly affects the battlefield survivability of military targets, especially infrared, acoustic wave, and radar detection expose targets by capturing their unavoidable infrared radiation, acoustic wave, and electromagnetic wave information, greatly affecting their battlefield survival and penetration capabilities. Therefore, there is an urgent need to develop stealth-protective materials that can suppress infrared radiation, reduce acoustic characteristics, and weaken electromagnetic signals. Fibrous three-dimensional porous materials, with their high porosity, excellent structural adjustability, and superior mechanical properties, possess strong potential for development in the field of stealth protection. This article introduced and reviewed the characteristics and development process of fibrous three-dimensional porous materials at both the micrometer and nanometer scales. Then, the process and characteristics of preparing fibrous three-dimensional porous materials through vacuum forming, gel solidification, freeze-casting, and impregnation stacking methods were analyzed and discussed. Meanwhile, their current application status in infrared, acoustic wave, and radar stealth fields was summarized and their existing problems and development trends in these areas from the perspectives of preparation processes and applicability were analyzed. Finally, several prospects for the current challenges faced by fibrous three-dimensional porous materials were proposed as follows: functionally modifying fibers to enhance their applicability through self-cross-linking; establishing theoretical models for the transmission of thermal energy, acoustic waves, and electromagnetic waves within fibrous porous materials; constructing fibrous porous materials resistant to impact, shear, and fracture to meet the needs of practical applications; developing multifunctional stealth fibrous porous materials to confer full-spectrum broadband stealth capability; and exploring the relationship between material size and mechanical properties as a basis for preparing large-scale samples that meet the application's requirement. This review is very timely and aims to focus researchers' attention on the importance and research progress of fibrous porous materials in the field of stealth protection, so as to solve the problems and challenges of fibrous porous materials in the field of stealth protection and to promote the further innovation of fibrous porous materials in terms of structure and function. [ABSTRACT FROM AUTHOR]

Nanocellulose, a nanoscale derivative from renewable biomass sources, possesses remarkable colloidal properties in water, mechanical strength, and biocompatibility. It emerges as a promising bio-based dispersing agent for various nanomaterials in water. This mini-review explores the interaction between cellulose nanomaterials (nanocrystals or nanofibers) and water, elucidating how this may enable their potential as an eco-friendly dispersing agent. We explore the potential of nanocellulose derived from top-down processes, nanocrystals, and nanofibers for dispersing carbon nanomaterials, semiconducting oxide nanoparticles, and other nanomaterials in water. We also highlight its advantages over traditional methods by not only effectively dispersing those nanomaterials but also potentially eliminating the need for further chemical treatments or supporting stabilizers. This not only preserves the exceptional properties of nanomaterials in aqueous dispersion, but may even lead to the emergence of novel hybrid functionalities. Overall, this mini-review underscores the remarkable versatility of nanocellulose as a green dispersing agent for a variety of nanomaterials, inspiring further research to expand its potential to other nanomaterials and applications. [ABSTRACT FROM AUTHOR]

The augmented demand for sustainable nanocomposites has paved the way to explore naturally derived materials. Nanocellulose, with its bountiful sources and inherent properties, ranks top in the list of biofillers with a perspective of reducing the carbon footprint. A systematic study is required to understand the reinforcing effect of various types of nanocellulose. In the present work, we selected three types of nanocellulose, i.e., cellulose nanocrystal (CNC), cellulose nanofiber (CNF) and microfibrillated cellulose (MFC), to investigate the effect of geometrical structure on the properties of unvulcanized natural rubber (NR). Incorporating these fillers improved the tensile strength and modulus of natural rubber films significantly through reinforcement via filler network structure. The reinforcing effect of CNF was found to be higher compared to CNC and MFC, where an increase of 3.85 MPa in tensile strength from the neat sample was obtained. More uniform dispersion was evident through transmission electron microscopy, atomic force microscopy and Raman imaging for CNF in the rubber matrix. The structural properties were determined using Raman spectra and X-ray diffraction. The rheological studies revealed a good interaction between filler and NR. The work presented comprehensively compares different types of nanocellulose as reinforcing filler in NR matrix, which will help the researchers select an ideal type for their specific application and, thus, the proper usage of renewable resources, leading to sustainability and a circular economy. [ABSTRACT FROM AUTHOR]

An environmentally feasible approach was adopted for the green synthesis of silver nanoparticles (AgNPs) in the BC membrane using Komagataeibacter intermedius (MBS-88) strain. BC production was optimized, resulting in 14.72 g/L of BC when crude glycerol was utilized as a carbon source. The produced BC has a tensile strength of 387 N/m2, an elongation at break % of 2.04, and a Young's modulus of 304 MPa. The bacterial cellulose/AgNP composites have been successfully synthesized using BC as a template via the hydrothermal synthesis in which bacterial cellulose itself acts as a reducing and stabilizing agent. The characterization of the synthesized AgNPs was carried out using electron microscopy (SEM and TEM), Fourier transform infrared microscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Adherence of AgNPs to the surface of the BC matrix was observed under SEM. Particle size distribution shows nanoparticles are in the range of 5–45 nm. XRD shows AgNPs peaks at 38.2° (111), 46.3° (200), and 64.5° (220). Peaks of Ag 3d at 367.58 eV and 373.55 eV, along with C 1 s at 284.26 eV and O 1 s at 532.16 eV, were observed in XPS spectra. BC/Ag nanocomposite disk showed better antibacterial activities against Staphylococcus epidermidis ATCC 2228 (6.5 ± 0.1 mm), Staphylococcus aureus 29,213 (6 ± 0.2 mm), and Pseudomonas aeruginosa (5.1 ± 0.2 mm). Thus, the synthesized BC–AgNPs could be used in controlling wound infections as an alternative to chemical synthesis that might have deleterious effects on the ecosystem. [ABSTRACT FROM AUTHOR]

The flexibility and stability of transparent electrodes play a crucial role in the growing popularity of flexible devices, especially in potential wearable electronics. To date, various solution-coating techniques have been developed for fabricating silver nanowire (AgNW) flexible bioelectronics. However, achieving the orderly distributed patterns of AgNW without undesirable aggregations still poses a grand challenge. Here, an approach to realize regular patterned ultrathin AgNW networks on a freestanding electrospun PVDF-TrFE frame by evaporation-induced self-assembly is proposed. The patterning mechanism of evaporating AgNW colloidal suspension is investigated from experimental and theoretical analysis. The influence of evaporation-induced flow inside colloidal freestanding membranes on forming regular square hole-shaped arrays, selective deposition of AgNW, and aligning them along the artificial pinning array are addressed. Owing to the orderly arrangement of AgNW networks, the resultant flexible electrode achieves ultrathin thickness (about 5 μm), high optical transmittance (87.8%), and low sheet resistance (8.4 Ω·sq−1) with a relatively low dosage of AgNW (9 μg·cm−2). The electrode exhibits excellent durability during cyclic bending (50,000 times) and stretching (50% strain). The resistance remains virtually unchanged during 200 days in everyday environments. Furthermore, the excellent conformability and breathability of the flexible transparent electrode attached to the human skin demonstrates its potential application as an e-skin sensor. Our findings reliably urge a simple approach to underscore better outcomes with effective patterns by self-assembly of AgNW for highly conformal wearable electronics. [ABSTRACT FROM AUTHOR]

Systemic inflammation and coronary microvascular endothelial dysfunction are essential pathophysiological factors in heart failure (HF) with preserved ejection fraction (HFpEF) that support the use of statins. The pleiotropic properties of statins, such as anti-inflammatory, antihypertrophic, antifibrotic, and antioxidant effects, are generally accepted and may be beneficial in HF, especially in HFpEF. Numerous observational clinical trials have consistently shown a beneficial prognostic effect of statins in patients with HFpEF, while the results of two larger trials in patients with HFrEF have been controversial. Such differences may be related to a more pronounced impact of the pleiotropic properties of statins on the pathophysiology of HFpEF and pro-inflammatory comorbidities (arterial hypertension, diabetes mellitus, obesity, chronic kidney disease) that are more common in HFpEF. This review discusses the potential mechanisms of statin action that may be beneficial for patients with HFpEF, as well as clinical trials that have evaluated the statin effects on left ventricular diastolic function and clinical outcomes in patients with HFpEF. [ABSTRACT FROM AUTHOR]

Red ginseng extract is one of the most widely used herbal medicines to prevent and cure various diseases. Among the processed products derived from red ginseng, the water-insoluble part as red ginseng residual (RGR) becomes waste, even though it contains important ingredients. TEMPO-oxidation (TO) can be used as a pre-treatment with different degrees of oxidation (DO) (0 to 0.4) in red ginseng residual (RGR-TO) by introducing chemical oxidation and high-pressure homogenizer (HPH) as a nanofibrillation process. 1H NMR was used to determine the carbohydrate composition and calculate DO, size was examined using a nanoparticle analyzer, and the zeta potential was used to determine surface charge density. RGR-TO with different concentrations had different compositions; glucose and uronic acid were the main ingredients. All treated RGR-TO showed higher oxidant levels than the untreated counterpart (RGR-TO 0). As the oxidant levels increased, the zeta potential and uronic acid increased, but the size of the nanofibril from RGR-TO decreased. The results of this study showed that TEMPO-oxidation pretreatment was effective in producing RGR cellulose nanofibril (CNF) with a variety of properties by adjusting the level of oxidation pretreatment and the number of HPH passes. [ABSTRACT FROM AUTHOR]

This mini-review presents the fabrication methods for polysaccharide composite materials that employ self-assembled chitin nanofibers (ChNFs) as functional components. Chitin is one of the most abundant polysaccharides in nature. However, it is mostly not utilized because of its poor feasibility and processability. Self-assembled ChNFs are efficiently obtained by a regenerative bottom-up process from chitin ion gels using an ionic liquid, 1-allyl-3-methylimodazolium bromide. This is accomplished by immersing the gels in methanol. The resulting dispersion is subjected to filtration to isolate the regenerated materials, producing ChNF films with a morphology defined by highly entangled nanofibers. The bundles are disintegrated by electrostatic repulsion among the amino groups on the ChNFs in aqueous acetic acid to produce thinner fibers known as scaled-down ChNFs. The self-assembled and scaled-down ChNFs are combined with other chitin components to fabricate chitin-based composite materials. ChNF-based composite materials are fabricated through combination with other polysaccharides. [ABSTRACT FROM AUTHOR]

Candida albicans is a prevalent fungal pathogen that displays antibiotic resistance. The polyene antifungal amphotericin B (AmB) has been the gold standard because of its broad antifungal spectra, and its liposomal formulation, AmBisome, has been used widely and clinically in treating fungal infections. Herein, we explored enhancing the antifungal activity of AmBisome by integrating a small chitin-binding domain (LysM) of chitinase A derived from Pteris ryukyuensis. LysM conjugated with a lipid (LysM–lipid) was initially prepared through microbial transglutaminase (MTG)-mediated peptide tag-specific conjugation of LysM with a lipid–peptide substrate. The AmBisome formulation modified with LysM–lipid conjugates had a size distribution that was comparable to the native liposomes but an increased zeta potential, indicating that LysM–lipid conjugates were anchored to AmBisome. LysM–lipid-modified AmBisome exhibited long-term stability at 4 °C while retaining the capacity to bind chitin. Nevertheless, the antifungal efficacy of LysM–lipid-modified AmBisome against C. albicans was modest. We then redesigned a new LysM–lipid conjugate by introducing a peptide linker containing a thrombin digestion (TD) site at the C-terminus of LysM (LysM–TD linker–lipid), thereby facilitating the liberation of the LysM domain from AmBisome upon the addition of thrombin. This new AmBisome formulation anchored with LysM–TD linker–lipid exhibited superior performance in suppressing C. albicans growth in the presence of thrombin compared with the LysM–lipid formulation. These results provide a platform to design stimuli-responsive AmBisome formulations that respond to external environments and thus advance the treatment of pathogenic fungi infections. [ABSTRACT FROM AUTHOR]

Introduction: Mitral annular calcification (MAC) is commonly observed in patients with cardiovascular diseases and has been associated with adverse clinical outcomes. This study aims to clarify the prevalence and impact of MAC on peri -procedural, in-hospital, and longterm outcomes in high-surgical-risk patients with severe aortic stenosis (AS) undergoing transcatheter aortic valve implantation (TAVI). Materials and Methods: 403 patients underwent TAVI for severe AS was retrospectively evaluated. MAC was identified on transthoracic-echocardiography and confirmed on computed-tomography in 45.4% of patients. Clinical outcomes, including in-hospital mortality and two-year follow-up mortality, were evaluated, and potential predictors of MAC and mortality were analyzed using logistic and Cox regression models. Results: MAC was more prevalent in older, female patients with atrial fibrillation. Although the presence of MAC did not co rrelate with increased in-hospital (unadj OR: 1.77, 95% CI (0.88-3.54)) or long-term mortality (unadj OR: 0.73, 95% CI (0.40-1.33)), it was associated with a higher requirement for post-TAVI permanent pacemaker implantation (PPI) and moderate-to-severe paravalvular aortic regurgitation (PVAR). Multivariate analysis revealed left ventricular ejection fraction (adj HR: 0.97, 95% CI (0.94-0.99)), mean transvalvular gradient, (adj HR: 1.02, 95% CI (1.00-1.04)) systolic pulmonary artery pressure (adj HR: 1.04, 95% CI (1.01-1.0.6)) and severe PVAR (adj HR: 3.16, 95% CI (1.25-7.96)) as independent predictors of long-term mortality. Conclusion: In patients with severe AS undergoing TAVI, MAC is a marker of complex cardiac pathology but does not independently predict mortality. However, its presence may increase the need for PPI and the incidence of PVAR, which warrants attention in postoperative management and follow-up. [ABSTRACT FROM AUTHOR]