Search

Previous study found that the solvent extraction efficiency of lipid in microalgae could be greatly improved by washing algae cells before the second time extraction. Based on the "organic solvents-water-organic solvents" method, this research further studied the effect of four solvent systems (acetone, chloroform/methanol, chloroform/methanol/water, dichloromethane/methanol), two types of water treatment (vortex and ultrasonic), three water treatment time gradient (0 s, 30 s, 120 s) on the lipid extraction at three different microalgae growth stages (3rd day, 5th day, 9th day). The results show that the combination of water treatment type, treatment time and solvent is very important to the efficiency of lipid extraction. The total lipid extracted was generally increased by 10-30% after water treatment. Especially under the condition of 120 s vortex water treatment with dichloromethane/methanol as extraction solvent, the total lipid extracted increased by 61.14%. In addition, microalgae cells at different culture stages had different sensitivity to water treatment. In this study, under the combination of chloroform/methanol/water as extraction solvent and vortex water treatment for 120 s, the highest lipid yield was obtained on the ninth day of cell culture, which accounts 47.88% of the cell dry weight (478 mg/g cell dry weight). The changes of cell morphology and structure after water treatment were studied by scanning electron microscope, and it was found that water treatment could seriously destroy the cell membrane damaged by solvent, thus promoting the release of lipids. This study further optimizes the "solvent-water-solvent" lipid extraction method, which neither produces impurities nor damages the lipid quality, and can reduce the amount of organic solvent applied in the classical lipid extraction method with the same lipid yield, so it has a broad application prospect., (© 2021. The Author(s).)

Botryococcus braunii produce liquid hydrocarbons able to be processed into combustion engine fuels. Depending on the growing conditions, the cell doubling time can be up to 6 days or more, which is a slow growth rate in comparison with other microalgae. Few studies have analyzed the cell cycle of B. braunii . We did a bioinformatic comparison between the protein sequences for retinoblastoma and cyclin-dependent kinases from the A (Yamanaka) and B (Showa) races, with those sequences from other algae and Arabidopsis thaliana . Differences in the number of cyclin-dependent kinases and potential retinoblastoma phosphorylation sites between the A and B races were found. Some cyclin-dependent kinases from both races seemed to be phylogenetically more similar to A. thaliana than to other microalgae. Microscopic observations were done using several staining procedures. Race A colonies, but not race B, showed some multinucleated cells without chlorophyll. An active mitochondrial net was detected in those multinucleated cells, as well as being defined in polyphosphate bodies. These observations suggest differences in the cell division processes between the A and B races of B. braunii .

Heterotrophic cultivation of Chlorella has achieved commercial success, but the application of Chlorella biomass is still limited due to the high cost of biomass production. In this study, an effective and industrially scalable heterotrphic cultivation technology has been developed for a production strain Chlorella sorokiniana GT-1. Under the optimized culturing conditions, the ultrahigh biomass concentration of 271 and 247 g L -1 was achieved in 7.5 L bench-scale and 1000 L pilot-scale fermenters, respectively. Technoeconomic (TE) analysis indicated that the production cost of C. sorokiniana GT-1 could be reduced to $1601.27 per ton of biomass if the biomass concentration reached 200 g L -1 , which is 24.2% lower than that of the reported highest Chlorella biomass production through fermentation with the same TE model. Under the same growth conditions, the maximum biomass concentration of a low-starch mutant SLM2 was reduced to 93 g L -1 , which was 54% lower than that of the wild type, indicating the capabilities of C. sorokiniana GT-1 cells in accumulating large amounts of starch are essential for achieving the ultrahigh-cell-density under the heterotrophic conditions. In addition, the ultrahigh-cell-density growth potential of C. sorokiniana GT-1 cells was inferred to be related to the intrinsic biological characteristics including the tolerance to low dissolved oxygen and a moderate doubling time under the heterotrophic conditions as well. The breakthrough in cultivation technology is promising for Chlorella industry and would expand its applications in food and feed., (© 2021 Wiley Periodicals LLC.)

Microalgae cultivation on wastewater is one of the most promising processes in perspective of green and circular economy. This study investigated the economics of integrating the microalgae cultivation with the wastewater treatment in perspective of biomass production and wastewater treatment. The cost of integrated process was evaluated for six cases: three cases for domestic wastewater at different stages of treatment including sewage, anaerobically digested domestic effluent, and centrate and three cases for industrial wastewater including agro-industrial wastewater, anaerobically digested piggery effluent, and anaerobically digested abattoir effluent. The cost of biomass production was found ranging from $ 0.39 to $ 0.92/kg with minimum for the anaerobically digested domestic effluent and centrate. The cost of wastewater treatment was found ranging from 0.18 to 1.69/m 3 with minimum for the sewage. These costs did not include any credits generated from the biomass or the treated wastewater. The concentration of limiting nutrient, flowrate of wastewater, and the extent of nutrient removal are the major cost-influencing parameters for the integrated process., (© 2021. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Background: The three-phase extraction process of olive oil produces highly contaminated wastewater (OMW). The elimination of this toxic by-product is an important environmental issue that requires the development of an appropriate management solution. The cultivation of microalgae using OMW as growth medium was therefore studied using single (the culture medium was formed by 0% to 80% ultrafiltered olive mill wastewater (OMUF) or OMW added to BG11) and two-stage strategies (microalgae were firstly cultivated in the BG11 medium. In the second stage, 40% and 80% of OMUF and OMW were added to the culture). In this work, biodegradation of OMW and subsequent extraction of lipid and antioxidant molecules was investigated as an ecofriendly method for the bioremediation and valorization of OMW., Results: For two-stage cultivation, OMUF and OMW stress enhanced the intracellular amount of polyphenol accumulated in Scenedesmus sp. and exhibited the highest 2, 2-diphenyl-1- picrylhydrazyl radical (DPPH) and 2,2'-azino-bis (3-ethylbenzoline-6-sulfonate) radical (ABTS) scavenging ability compared with single-stage cultivation. Moreover, the lipid profile is dominated by polyunsaturated acids. In the single-stage cultivation, the Ch a, Ch b, carotenoid, carbohydrate and lipid content of 2.57, 7.4, 1.69, 368, and 644 g kg -1 were observed in 40% OMUF added culture, respectively, along with high biomass productivity and 58% of polyphenol removal. Moreover, the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed that the biomass of Scenedesmus sp. cultured on 40% OMUF did not show any toxic effect, making it an efficient strategy., Conclusion: The results indicate that Scenedesmus sp. is a promising microalga for the biotreatment of OMW and the extraction of bioactive metabolites. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

Microalgae offer a promising source of biofuel and a wide array of high-value biomolecules. Large-scale cultivation of microalgae at low density poses a significant challenge in terms of water management. High-density microalgae cultivation, however, can be challenging due to biochemical changes associated with growth dynamics. Therefore, there is a need for a biomarker that can predict the optimum density for high biomass cultivation. A locally isolated microalga Cyanobacterium aponinum CCC734 was grown with optimized nitrogen and phosphorus in the ratio of 12:1 for sustained high biomass productivity. To understand density-associated bottlenecks secretome dynamics were monitored at biomass densities from 0.6 ± 0.1 to 7 ± 0.1 g/L (2 to 22 OD) in batch mode. Liquid chromatography coupled with mass spectrometry identified 880 exometabolites in the supernatant of C. aponinum CCC734. The PCA analysis showed similarity between exometabolite profiles at low (4 and 8 OD) and mid (12 and 16 OD), whereas distinctly separate at high biomass concentrations (20 and 22 OD). Ten exometabolites were selected based on their role in influencing growth and are specifically present at low, mid, and high biomass concentrations. Taking cues from secretome dynamics, 5.0 ± 0.5 g/L biomass concentration (16 OD) was optimal for C. aponinum CCC734 cultivation. Further validation was performed with a semi-turbidostat mode of cultivation for 29 days with a volumetric productivity of 1.0 ± 0.2 g/L/day. The secretomes-based footprinting tool is the first comprehensive growth study of exometabolite at the molecular level at variable biomass densities. This tool may be utilized in analyzing and directing microalgal cultivation strategies and reduction in overall operating costs., (© 2021. The Author(s), under exclusive licence to Springer Nature B.V.)

Eukaryotic phytoplankton are responsible for at least 20% of annual global carbon fixation. Their diversity and activity are shaped by interactions with prokaryotes as part of complex microbiomes. Although differences in their local species diversity have been estimated, we still have a limited understanding of environmental conditions responsible for compositional differences between local species communities on a large scale from pole to pole. Here, we show, based on pole-to-pole phytoplankton metatranscriptomes and microbial rDNA sequencing, that environmental differences between polar and non-polar upper oceans most strongly impact the large-scale spatial pattern of biodiversity and gene activity in algal microbiomes. The geographic differentiation of co-occurring microbes in algal microbiomes can be well explained by the latitudinal temperature gradient and associated break points in their beta diversity, with an average breakpoint at 14 °C ± 4.3, separating cold and warm upper oceans. As global warming impacts upper ocean temperatures, we project that break points of beta diversity move markedly pole-wards. Hence, abrupt regime shifts in algal microbiomes could be caused by anthropogenic climate change., (© 2021. The Author(s).)

Carbon dioxide supplementation is significant for cell growth in autotrophic cultures of microalgae. However, the CO 2 utilization efficiency is quite low in most processes. Aimed at this problem, six kinds of physical absorption enhancers were investigated to enhance the biological carbon sequestration of microalgae. By the addition of a small amount of CO 2 absorption enhancer, the total inorganic carbon concentration of the medium was significantly increased. In addition, the biomass productivity of Scenedesmus dimorphus was maximally increased by 63% by the addition of propylene carbonate in flask cultures. In cultures using an air-lift photobioreactor equipped with a pH-feedback control system to supply CO 2 , the CO 2 consumption was maximally reduced by 71% with added polyethylene glycol dimethyl ether. This study indicates that the incorporation of physical absorption enhancers could be a promising approach to overcome the problems of low CO 2 utilization efficiency and high carbon source cost in algal biomass production., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

MADS-box transcription factors (TFs) have not been functionally delineated in microalgae. In this study, the role of CsubMADS1 from microalga Coccomyxa subellipsoidea C-169 has been explored. Unlike Type II MADS-box proteins of seed plants with MADS, Intervening, K-box, and C domains, CsubMADS1 only has MADS and Intervening domains. It forms a group with MADS TFs from algae in the phylogenetic tree within the Type II MIKC C clade. CsubMADS1 is expressed strongly in the lag phase of growth. The CsubMADS1 monomer does not have a specific localization in the nucleus, and it forms homodimers to localize exclusively in the nucleus. The monomer has two nuclear localization signals (NLSs): an N-terminal NLS and an internal NLS. The internal NLS is functional, and the homodimer requires two NLSs for specific nuclear localization. Overexpression (OX) of CsubMADS1 slows down the growth of the culture and leads to the creation of giant polyploid multinucleate cells, resembling autospore mother cells. This implies that the release of autospores from autospore mother cells may be delayed. Thus, in wild-type (WT) cells, CsubMADS1 may play a crucial role in slowing down growth during the lag phase. Due to starvation in 2-month-old colonies on solid media, the WT colonies produce mucilage, whereas OX colonies produce significantly less mucilage. Thus, CsubMADS1 also negatively regulates stress-induced mucilage production and probably plays a role in stress tolerance during the lag phase. Taken together, our results reveal that CsubMADS1 is a key TF involved in the development and stress tolerance of this polar microalga., (© 2021 Society for Experimental Biology and John Wiley & Sons Ltd.)

Ever since the potential of algae in biotechnology was recognized, models describing the growth of algae inside photobioreactors have been proposed. These models are the basis for the optimization of process conditions and reactor designs. Over the last few decades, models became more and more elaborate with the increase of computational capacity. Thus far, these models have been based on light attenuation due to the absorption and scattering effects of the biomass. This manuscript presents a new way of predicting the apparent growth inside photobioreactors using simple models for enzymatic kinetics to describe the reaction between photons and the photosynthetic unit. The proposed model utilizes an inhibition kinetic formula based on the surrounding biomass to describe the average growth rate of a culture, which is determined by the local light intensities inside the reactor. The result is a mixed-inhibition scheme with multiple inhibition sites. The parameters of the new kinetic equation are replaced by empirical regression functions to correlate their dependency on incident light intensity and reactor size. The calibrations of the parameters and the regression functions are based on the numerical solutions of the growth rate computed with a classical Type II model. As a final verification, we apply the new equation in predicting the growth behavior of three phototrophic organisms in reactors of three different sizes.

In depositional intertidal coastal systems, primary production is dominated by benthic microalgae (microphytobenthos) inhabiting the mudflats. This benthic productivity is supporting secondary production and supplying important services to humans including food provisioning. Increased frequencies of extreme events in weather (such as heatwaves, storm surges and cloudbursts) are expected to strongly impact the spatiotemporal dynamics of the microphytobenthos and subsequently their contribution to coastal food webs. Within north-western Europe, the years 2018 and 2019 were characterized by record-breaking summer temperatures and accompanying droughts. Field-calibrated satellite data (Sentinel 2) were used to quantify the seasonal dynamics of microphytobenthos biomass and production at an unprecedented spatial and temporal resolution during these years. We demonstrate that the Normalized Difference Vegetation Index (NDVI) should be used with caution in depositional coastal intertidal systems, because it may reflect import of remains of allochthonous pelagic productivity rather than local benthic biomass. We show that the reduction in summer biomass of the benthic microalgae cannot be explained by grazing but was most probably due to the high temperatures. The fivefold increase in salinity from January to September 2018, resulting from reduced river run-off during this exceptionally dry year, cannot have been without consequences for the vitality of the microphytobenthos community and its resistance to wind stress and cloud bursts. Comparison to historical information revealed that primary productivity of microphytobenthos may vary at least fivefold due to variations in environmental conditions. Therefore, ongoing changes in environmental conditions and especially extreme events because of climate change will not only lead to changes in spatiotemporal patterns of benthic primary production but also to changes in biodiversity of life under water and ecosystem services including food supply. Satellite MPB data allows for adequate choices in selecting coastal biodiversity conservation and coastal food supply., Competing Interests: The authors have declared that no competing interests exist.

Lumefantrine is used to treat uncomplicated malaria caused by pure or mixed Plasmodium falciparum infections and as a prophylactic against recrudescence following artemether therapy. However, the pharmaceutical is released into the aquatic environment from industrial effluents, hospital discharges, and human excretion. This study assessed the effects of lumefantrine on the growth and physiological responses of the microalgae Chlorella vulgaris and Raphidocelis subcapitata (formerly known as Selenastrum capricornutum and Pseudokirchneriella subcapitata) and the aquatic macrophyte Lemna minor. The microalgae and macrophyte were exposed to 200-10000 μg l -1 and 16-10000 μg l -1 lumefantrine, respectively. Lumefantrine had a variable effect on the growth of the aquatic plants investigated. There was a decline in the growth of R. subcapitata and L. minor post-exposure to the drug. Contrarily, there was stimulation in the growth of Chlorella vulgaris. All experimental plants had a significant increase in lipid peroxidation, which was accompanied by an increase in malondialdehyde content. Peroxidase activity of L. minor increased only at low lumefantrine concentrations, while the opposite occurred at higher levels of the drug. Incubation in lumefantrine contaminated medium significantly up-regulated the activity of R. subcapitata cultures. Glutathione S-transferase of L. minor exposed to lumefantrine treatments had substantially higher activities than the controls. Our findings suggest lumefantrine could have adverse but variable effects on the growth and physiology of the studied aquatic plants., (Copyright © 2021 Elsevier B.V. All rights reserved.)

With the increasing demand for typical hazardous and noxious substances (HNS) in chemical industry, there is an increased leakage risk of these HNS during transportation by vessel and storage nearby seashore. In this study, the acute toxicity of nonylphenol, butyl acrylate and 1, 2-dichloroethane to Phaeodactylum tricornutum (P. tricornutum) and Platymonas subcordiformis (P. subcordiformis), was investigated to assess their ecological risk. The results showed that the three kinds of HNS showed significant time- and dose-dependent patterns on the growth inhibition of two marine microalgae. The 96 h-EC 50 of nonylphenol, butyl acrylate and 1, 2-dichloroethane on P. tricornutum was 1.088, 45.908 and 396 mg L -1 , respectively, and the 96 h-EC 50 of that on P. subcordiformis was 0.851, 52.621 and 389 mg L -1 , respectively. It was a common method to evaluate the harm of pollutants to organisms by calculating HC 5 value (the minimum pollutant concentration value harmful to 95 % of the studied species, which was no-effect concentration) with Species Sensitivity Distribution (SSD). On the basis of EC 50 , the ecological risk assessment was further carried out, and HC 5 value of nonylphenol and 1, 2-dichloroethane to aquatic organism was 0.079 and 44 mg L -1 , respectively., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Since the removal of contaminations in microalgal cultures is extremely laborious and time-consuming, we developed a rapid workflow to obtain axenicity by a combination of fluorescence-activated cell sorting (FACS) and plate spreading. During method development, several cyanobacteria and green algae strains were successfully made axenic. At the end, method transferability to another FACS device was demonstrated. Our workflow offers great time-savings with less hands-on laboratory work compared to conventional isolation techniques., (Copyright © 2021. Published by Elsevier B.V.)

The development of new strategies in microalgal studies represents an outstanding opportunity to mitigate environmental problems coupled with biomass production at a reduced cost. Here we present a combined bioprocess for the treatment of rice vinasse using immobilized cyanobacteria Synechococcus pevalekii in alginate beads followed by the use of the treated vinasse as a culture medium for Dunaliella salina biomass production. Cyanobacterial-alginate beads showed a chlorophyll a production of 0.68 × 10 -3  mg bead -1 and a total carotenoid production of 0.64 × 10 -3  mg bead -1 . The first step showed a decrease in nitrate (91%), total solids (29%), and ions. Addition of treated vinasse into D. salina cultivation resulted in a significant increase in cell replication of about 175% (optimized cultivation). The use of natural seawater drastically reduced the medium cost to US$4.75 per m 3 and the addition of treated vinasse has the potential to reduce it even more (up to 69%). This study not only provides an insight on the use of cyanobacteria for rice vinasse treatment but also demonstrates a promising lower-cost medium for marine microalgal biomass production with biotechnological purposes.

Our study focused on investigating the possibilities of controlling the accumulation of carbohydrates in certain microalgae species ( Arthrospira platensis Gomont, Chlorella vulgaris Beijer, and Dunaliella salina Teod) to determine their potential in biofuel production (biohydrogen). It was found that after the introduction of carbohydrates (0.05 g⋅L -1 ) into the nutrient medium, the growth rate of the microalgae biomass increased, and the accumulation of carbohydrates reached 41.1%, 47.9%, and 31.7% for Arthrospira platensis, Chlorella vulgaris , and Dunaliella salina , respectively. Chlorella vulgaris had the highest total carbohydrate content (a mixture of glucose, fructose, sucrose, and maltose, 16.97%) among the studied microalgae, while for Arthrospira platensis and Dunaliella salina, the accumulation of total carbohydrates was 9.59% and 8.68%, respectively. Thus, the introduction of carbohydrates into the nutrient medium can stimulate their accumulation in the microalgae biomass, an application of biofuel production (biohydrogen).

Microalgae have shown great potential as a source of biofuels, food, and other bioproducts. More recently, microfluidic devices have been employed in microalgae-related studies. However, at small fluid volumes, the options for controlling flow conditions are more limited and mixing becomes largely reliant on diffusion. In this study, we fabricated magnetic artificial cilia (MAC) and implemented them in millimeter scale culture wells and conducted growth experiments with Scenedesmus subspicatus while actuating the MAC in a rotating magnetic field to create flow and mixing. In addition, surface of MAC was made hydrophilic using plasma treatment and its effect on growth was compared with untreated, hydrophobic MAC. The experiments showed that the growth was enhanced by ten and two times with hydrophobic and hydrophilic MAC, respectively, compared with control groups which contain no MAC. This technique can be used to investigate mixing and flow in small sample volumes, and the enhancement in growth can be beneficial for the throughput of screening studies. Moreover, the methods used for creating and controlling MAC can be easily adopted in labs without microfabrication infrastructures, and they can be mastered by people with little prior experience in microfluidics., (© 2021 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

The extremophilic unicellular red microalga Galdieria sulphuraria (Cyanidiophyceae) is able to grow autotrophically, or mixo- and heterotrophically with 1% glycerol as a carbon source. The alga divides by multiple fission into more than two cells within one cell cycle. The optimal conditions of light, temperature and pH (500 µmol photons m -2 s -1 , 40 °C, and pH 3; respectively) for the strain Galdieria sulphuraria (Galdieri) Merola 002 were determined as a basis for synchronization experiments. For synchronization, the specific light/dark cycle, 16/8 h was identified as the precondition for investigating the cell cycle. The alga was successfully synchronized and the cell cycle was evaluated. G. sulphuraria attained two commitment points with midpoints at 10 and 13 h of the cell cycle, leading to two nuclear divisions, followed subsequently by division into four daughter cells. The daughter cells stayed in the mother cell wall until the beginning of the next light phase, when they were released. Accumulation of glycogen throughout the cell cycle was also described. The findings presented here bring a new contribution to our general understanding of the cell cycle in cyanidialean red algae, and specifically of the biotechnologically important species G. sulphuraria .

Prymnesium parvum is an environmentally harmful algae and well known for its toxic effects to the fish culture. However, there is a dearth of studies on the growth behavior of P. parvum and information on how the availability of nutrients and environmental factors affect their growth rate. To address this knowledge gap, we used a uniform design approach to quantify the effects of major nutrients (N, P, Si and Fe) and environmental factors (water temperature, pH and salinity) on the biomass density of P. parvum. We also generated the growth model for P. parvum as affected by each of these nutrients and environmental factors to estimate optimum conditions of growth. Results showed that P. parvum can reach its maximum growth rate of 0.789, when the water temperature, pH and salinity is 18.11 °C, 8.39, and 1.23‰, respectively. Moreover, maximum growth rate (0.895-0.896) of P. parvum reached when the concentration of nitrogen, phosphorous, silicon and iron reach 3.41, 1.05, 0.69 and 0.53 mg/l, respectively. The order of the effects of the environmental factors impacting the biomass density of P. parvum was pH > salinity > water temperature, while the order of the effects of nutrients impacting the biomass density of P. parvum was nitrogen > phosphorous > iron > silicon. These findings may assist to implement control measures of the population of P. parvum where this harmful alga threatens aquaculture industry in the waterbodies such as Ningxia region in China.

As the effects of climate change become increasingly evident, the need for effective CO2 management is clear. Microalgae are well-suited for CO2 sequestration, given their ability to rapidly uptake and fix CO2. They also readily assimilate inorganic nutrients and produce a biomass with inherent commercial value, leading to a paradigm in which CO2-sequestration, enhanced wastewater treatment, and biomass generation could be effectively combined. Natural non-axenic phototrophic cultures comprising both autotrophic and heterotrophic fractions are particularly attractive in this endeavour, given their increased robustness and innate O2-CO2 exchange. In this study, the interplay between CO2-consuming autotrophy and CO2-producing heterotrophy in a non-axenic phototrophic biofilm was examined. When the biofilm was cultivated under autotrophic conditions (i.e. no organic carbon), it grew autotrophically and exhibited CO2 uptake. After amending its growth medium with organic carbon (0.25 g/L glucose and 0.28 g/L sodium acetate), the biofilm rapidly toggled from net-autotrophic to net-heterotrophic growth, reaching a CO2 production rate of 60 μmol/h after 31 hours. When the organic carbon sources were provided at a lower concentration (0.125 g/L glucose and 0.14 g/L sodium acetate), the biofilm exhibited distinct, longitudinally discrete regions of heterotrophic and autotrophic metabolism in the proximal and distal halves of the biofilm respectively, within 4 hours of carbon amendment. Interestingly, this upstream and downstream partitioning of heterotrophic and autotrophic metabolism appeared to be reversible, as the position of these regions began to flip once the direction of medium flow (and hence nutrient availability) was reversed. The insight generated here can inform new and important research questions and contribute to efforts aimed at scaling and industrializing algal growth systems, where the ability to understand, predict, and optimize biofilm growth and activity is critical., Competing Interests: The authors have declared that no competing interests exist.

Objectives: "Cultured food" is focused worldwide as "the third stage in meat production system" after hunting and livestock farming, and a sustainable food production system. In this study, we attempted to fabricate a three-dimensional (3-D) tissue by co-cultivation of animal cells with photosynthetic autotrophic microalgae so as to produce thicker and healthy cultured foods., Results: Metabolism and damage of co-cultured tissues fabricated by microalgae, Chlorella vulgaris (C. vulgaris), and C2C12 cells were compared to monoculture tissues fabricated by C2C12 animal cells alone. Although the metabolism of monoculture tissue showed anaerobic respiration (ratio of lactate production to glucose consumption, LG ratio: 2.01 ± 0.15), that of the co-culture tissue partially changed to efficient aerobic respiration (LG ratio: 1.58 ± 0.14). In addition, the amount of ammonia in the culture media decreased markedly by co-cultivation. The release of lactate dehydrogenase from the thicker tissue was one-seventh in the co-cultivation, showing improved tissue damage. The co-cultivation with microalgae improved the culture condition of thicker tissues, resulting in the fabrication/maintenance of 200-400 µm-thickness tissues. The co-cultured tissue fabricated by microalgae and animal cells was not only rich in nutrients but also enabled thicker tissue fabrication without tissue damage as compared to tissue fabricated by animal cells alone., Conclusions: This tissue fabrication system by co-culture of microalgae and animal cells will be a valuable tool for the production of thicker and healthy cultured food.

Ionic liquids are widely used for lipid and pigment extractions from microalgae. It is possible that ionic liquids are discharged into environments. The evaluation of growth performance and antioxidative response of ionic liquids to microalgae is helpful to explore the stress regulation mechanism and investigate possible environmental risk. Ionic liquids induce production of reactive oxygen species (ROS) to microalgae. These oxidative stresses are possible from cations, anions, and salinity. In this study, the growth inhibitions of [BMIM]Br, [BMIM]Cl, [EMIM]Cl, and [EMIM]EtOSO 3 to Anabaena cylindrica, Chlorella pyrenoidesa, and Dunaliella salina were evaluated. It was interesting that Br - and two kinds of cations, [BMIM] and [EMIM], had significant effects on growth inhibitions of these microalgae. IC50 values of these ionic liquids for A. cylindrica, C. pyrenoidesa, and D. salina were also estimated based on the results of growth inhibitions. It was proved that [EMIM]Cl is relatively harmless to C. pyrenoidesa and D. salina, and [EMIM]EtOSO 3 is relatively or practically harmless to C. pyrenoidesa. [BMIM]Br and [BMIM]Cl are practically harmless to A. cylindrica and C. pyrenoidesa, and relatively harmless to D. salina. More than 0.8 g/L [EMIM]EtOSO 3 led to bleaching of both A. cylindrica and D. salina at 48 h which was shown that the anion, EtOSO 3 - , had higher inhibition to A. cylindrica and D. salina than Cl - . In addition, high concentration of ionic liquids led to reductions of chlorophyll content in these three kinds of microalgae, increase of ROS levels and malondialdehyde contents for most of the cases. High concentration of ionic liquids also increased the activities of superoxide dismutase in three kinds of microalgae. There were positive correlations between ROS levels or MDA content, and inhibitions ratios of these ionic liquids to microalgae except [EMIM]Cl to A. cylindrica. These antioxidant enzymes were beneficial for reducing the ROS induced by ionic liquids.

An inelastic hyperspectral Scheimpflug lidar system was developed for microalgae classification and quantification. The correction for the refraction at the air-glass-water interface was established, making our system suitable for aquatic environments. The fluorescence spectrum of microalgae was extracted by principal component analysis, and seven species of microalgae from different phyla have been classified. It was verified that when the cell density of Phaeocystis globosa was in the range of ${{1}}{{{0}}^4}\sim{{1}}{{{0}}^6}\;{\rm{cell}}\;{\rm{m}}{{\rm{L}}^{- 1}}$, the cell density had a linear relationship with the fluorescence intensity. The experimental results show our system can identify and quantify microalgae, with application prospects for microalgae monitoring in the field environment and early warning of red tides or algal blooms.

The selection of a suitable growth regime can increase the physiological performance of microalgae and improve bioprocess based on these microorganisms from agro-industrial residues. Thus, this study assessed the biotechnology capacity-biomass production, biochemical composition, and nutrient uptake-from tequila vinasses (TVs) as the nutrient source of three indigenous microalgae-Chlorella sp., Scenedesmus sp., and Chlamydomonas sp.-cultured under heterotrophic and mixotrophic conditions. The results demonstrated that under the mixotrophic regime, the three microalgae evaluated reached the highest nitrogen uptake, biomass production, and cell compound accumulation. Under this condition, Chlorella sp. and Scenedesmus sp. showed the highest nutrient uptake and biomass production, 1.7 ± 0.3 and 1.9 ± 0.3 g L -1 , respectively; however, the biochemical composition, mainly carbohydrates and proteins, varied depending on the microalgal strain and its growth regime. Overall, our results demonstrated the biotechnological capacity of native microalgae from TVs, which may vary not only depending on the microalgal strain but also the culture strategy implemented and the characteristics of the residue used, highlighting-from a perspective of circular bio-economy-the feasibility of implementing microalgal bioprocess to reuse and valorize the nutrimental composition of TVs through biomass and high-valuable metabolite production, depicting a sustainable strategy for tequila agro-industry in Mexico.

Microalgae are versatile microorganisms with applications in food, energy and fine chemicals, among others. Modelling the dynamics of microalgae inside a photobioreactor is a convenient and inexpensive way to determine the concentration of cells over time. Numerous models have been developed in the literature, but only a few are able to give relevant biological information. Such information can then be used to further improve the production process. The objective of this work was to develop a model for the determination of microalgal dynamics inside a photobioreactor as a function of the environmental conditions, to retrieve the size-specific growth and division rates as well as the number of daughter cells. The results demonstrate how to evaluate the time needed for microalgae to complete a full life-cycle. Inexpensive laboratory-based procedures and mathematical modelling are combined for the determination of relevant biological parameters., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Porphyridium purpureum is a well-known Rhodophyta that recently has attracted enormous attention because of its capacity to produce many high-value metabolites such as the pigment phycoerythrin and several high-value fatty acids. Phycoerythrin is a fluorescent red protein-pigment commercially relevant with antioxidant, antimicrobial activity, and fluorescent properties. The volumetric mass transfer coefficient (k L a) was kept constant within the different scaling-up stages in the present study. This scaling-up strategy was sought to maintain phycoerythrin production and other high-value metabolites by Porphyridium purpureum , using hanging-bag photobioreactors. The k L a was monitored to ensure the appropriate mixing and CO 2 diffusion in the entire culture during the scaling process (16, 80, and 400 L). Then, biomass concentration, proteins, fatty acids, carbohydrates, and phycoerythrin were determined in each step of the scaling-up process. The k L a at 16 L reached a level of 0.0052 s -1 , while at 80 L, a value of 0.0024 s -1 was achieved. This work result indicated that at 400 L, 1.22 g L -1 of biomass was obtained, and total carbohydrates (117.24 mg L -1 ), proteins (240.63 mg L -1 ), and lipids (17.75% DW) were accumulated. Regarding fatty acids production, 46.03% palmitic, 8.03% linoleic, 22.67% arachidonic, and 2.55% eicosapentaenoic acid were identified, principally. The phycoerythrin production was 20.88 mg L -1 with a purity of 2.75, making it viable for food-related applications. The results of these experiments provide insight into the high-scale production of phycoerythrin via the cultivation of P. purpureum in an inexpensive and straightforward culture system.

The microbial communities play a crucial role in ecosystem functioning through interactions among individuals and taxonomic groups in a highly dynamic marine ecosystem. The structure and functioning of the microbial communities are often influenced by the changes in the surrounding environment. Monitoring the microbial diversity of the marine ecosystem helps to understand spatial patterns of microbial community and changes due to season, climate, and various drivers of biological diversity. Kuwait is characterized by an arid environment with a high degree of temperature variation during summer and winter. Our understanding of spatial distribution patterns of microbial communities, their diversity, and the influence of human activities on the degree of changes in the diversity of the microbial community in Kuwait territorial waters remain unclear. In this study, we employed 18S rRNA sequencing to explore marine microalgal community composition and dynamics in seawater samples collected from Kuwait waters over two seasonal cycles across six locations. A total of 448,184 sequences across 36 replicates corresponding to 12 samples from six stations were obtained. The quality-filtered sequences were clustered into 1,293 representative sequences, which were then classified into different eukaryotic taxa. This study reveals that the phytoplankton community in Kuwait waters is diverse and shows significant variations among different taxa during summer and winter. Dinoflagellates and diatoms were the most abundant season-dependent microalgae taxa in Kuwait waters. Alexandrium and Pyrophacus were abundant in summer, whereas Gonyaulax was abundant during the winter. The abundance of Coscinodiscus and Navicula, of the diatom genera, were also dependent upon both seasonal and possible anthropogenic factors. Our results demonstrate the effectiveness of a sequencing-based approach, which could be used to improve the accuracy of quantitative eukaryotic microbial community profiles., Competing Interests: The authors have declared that no competing interests exist.

Microplastics (MP) widely distributed in aquatic environments have adverse effects on aquatic organisms. Currently, the impact of MP on toxigenic red tide microalgae is poorly understood. In this study, the strain of Alexandrium pacificum ATHK, typically producing paralytic shellfish toxins (PST), was selected as the target. Effects of 1 and 0.1 μm polystyrene MP with three concentration gradients (5 mg L -1 , 25 mg L -1 and 100 mg L -1 ) on the growth, chlorophyll a (Chl a ), photosynthetic activity (F v /F m ) and PST production of ATHK were explored. Results showed that the high concentration (100 mg L -1 ) of 1 μm and 0.1 μm MP significantly inhibited the growth of ATHK, and the inhibition depended on the size and concentration of MP. Contents of Chl a showed an increase with various degrees after MP exposure in all cases. The photosynthesis indicator F v /F m of ATHK was significantly inhibited in the first 11 days, then gradually returned to the level of control group at day 13, and finally was gradually inhibited in the 1 μm MP treatments, and promotion or inhibition to some degree also occurred at different periods after exposure to 0.1 μm MP. Overall, both particle sizes of MP at 5 and 25 mg L -1 had no significant effect on cell toxin quota, and the high concentration 100 mg L -1 significantly promoted the PST biosynthesis on the day 7, 11 and 15. No significant difference occurred in the cell toxin quota and the total toxin content in all treatments at the end of the experiment (day 21). All MP treatments did not change the toxin profiles of ATHK, nor did the relative molar percentage of main PST components. The growth of ATHK, Chl a content, F v /F m and toxin production were not affected by MP shading. This is the first report on the effects of MP on the PST-producing microalgae, which will improve the understanding of the adverse impact of MP on the growth and toxin production of A. pacificum .

Algal biofuel research aims to make a renewable, carbon-neutral biofuel by using oil-producing microalgae. The freshwater microalga Botryococcus braunii has received much attention due to its ability to accumulate large amounts of petroleum-like hydrocarbons but suffers from slow growth. We performed a large-scale screening of fast-growing strains with 180 strains isolated from 22 ponds located in a wide geographic range from the tropics to cool-temperate. A fast-growing strain, Showa, which recorded the highest productivities of algal hydrocarbons to date, was used as a benchmark. The initial screening was performed by monitoring optical densities in glass tubes and identified 9 wild strains with faster or equivalent growth rates to Showa. The biomass-based assessments showed that biomass and hydrocarbon productivities of these strains were 12-37% and 11-88% higher than that of Showa, respectively. One strain, OIT-678 established a new record of the fastest growth rate in the race B strains with a doubling time of 1.2 days. The OIT-678 had 36% higher biomass productivity, 34% higher hydrocarbon productivity, and 20% higher biomass density than Showa at the same cultivation conditions, suggesting the potential of the new strain to break the record for the highest productivities of hydrocarbons.

The focus of this research is spectral shifting of light using phycocyanin solution extracted from the blue-green microalga Spirulina platensis in order to increase biomass productivity of the green microalga Chlorella sp. Also, lipid and chlorophyll content of the green alga was investigated. With regard to the shift of the spectrum with the phycocyanin solution, a double layer flat panel photobioreactor and two different spectral shifting strategies were used. In each strategy, the effect of two different concentrations of the solution was investigated. In the first strategy, the light passes through the chamber containing the solution and then enters the microalga culture chamber. In the second strategy, the light first enters the culture chamber and then enters the chamber containing phycocyanin pigment. The results showed that the use of phycocyanin pigment by both strategies increased the biomass productivity (P) and the specific growth rate (μ max ) with a significant difference compared to the control system; the increase in P for first strategy was up to about 69%. Moreover, the use of phycocyanin solution with a lower concentration had a greater effect on the increase of total chlorophyll content; however, the solution with a higher concentration was more successful in the production of cell lipid content. Using the phycocyanin solution as spectral converter in a double layer flat panel photobioreactor increased the biomass productivity and chlorophyll content.

Microalgae have expanded their roles as renewable and sustainable feedstocks for biofuel, smart nutrition, biopharmaceutical, cosmeceutical, biosensing, and space technologies. They accumulate valuable biochemical compounds from protein, carbohydrate, and lipid groups, including pigments and carotenoids. Microalgal biomass, which can be adopted for multivalorization under biorefinery settings, allows not only the production of various biofuels but also other value-added biotechnological products. However, state-of-the-art technologies are required to optimize yield, quality, and the economical aspects of both upstream and downstream processes. As such, the need to use microfluidic-based devices for both fundamental research and industrial applications of microalgae, arises due to their microscale sizes and dilute cultures. Microfluidics-based devices are superior to their competitors through their ability to perform multiple functions such as sorting and analyzing small amounts of samples (nanoliter to picoliter) with higher sensitivities. Here, we review emerging applications of microfluidic technologies on microalgal processes in cell sorting, cultivation, harvesting, and applications in biofuels, biosensing, drug delivery, and nutrition., (© 2021 Wiley Periodicals LLC.)

To compare the influence of water samples collected from various areas on toxic effect of HNS, we examined the toxic effect of two commonly found HNS: p-chloroaniline and butyl acrylate, on Nannochloropsis oculata cultured in seawater collected from Laizhou bay and Jiaozhou bay (China). The results showed that both p-chloroaniline and butyl acrylate had significant toxic effect on N. oculata cultured in both water samples. P-chloroaniline inhibited its net oxygenation rate and oxygen consumption rate. Butyl acrylate inhibited the net oxygenation rate whereas significantly stimulated oxygen consumption rate. Performance of N. oculata changed between two water samples under same level of p-chloroaniline and butyl acrylate. The net oxygenation rate of N. oculata cultured in the seawater from the Jiaozhou bay increased by 11.60 %, the oxygen consumption rate increased by 26.91 %, algae cell growth decreased by 16.83 %, compared to those from Laizhou bay. The Fv/Fm of N. oculata cultured in Jiaozhou bay was more significantly inhibited at 0.5 and 2.0 mg L -1 p-chloroaniline, while it was significantly inhibited at 5. 0 mg L -1 of butyl acrylate, compared to those from Laizhou bay. Moreover, the toxic effect of both HNS on net oxygenation rate and oxygen consumption rate were significantly attenuated as the concentration increased. The growth inhibition of microalgae cultured in two seawater samples was more evident at 0.5 and 5.0 mg L -1 p-chloroaniline than at 2.0 mg L -1 p-chloroaniline,and the growth inhibition of microalgae cultured in two seawater samples was more evident at 2.0 and 5.0 mg L -1 butyl acrylate than at 0.5 mg L -1 butyl acrylate. These results indicated that toxic effect of p-chloroaniline and butyl acrylate on the growth of N. oculata was influenced by the pollutants in the two water samples. Consequently, a corresponding research on water sample is required in advance to increase accuracy of future ecological risk assessment of HNS., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Microalgae constitute a heterogeneous and diverse range of organisms capable of accumulating bioactive metabolites, making them promising feedstock for applications in the nutraceutical, functional food, animal feed, biofertilisation or biofuel sectors. There has been renewed interest in recent times in natural sources of antioxidants, particularly as health products and preserving agents. Microalgae strains isolated from aquatic habitats in Ireland were successfully brought into culture. The 91 strains were grown phototrophically in nutrient-enriched media to generate biomass, which was harvested and assessed for antioxidant potential. Extracts were screened for antioxidant activity using a modified volumetric Trolox-ABTS assay and the Folin-Ciocalteu method. Two heterokont marine strains of interest were further studied to ascertain variations in antioxidant capacity across different stages of batch culture growth. The antioxidant activity of extracts of bacillariophyte cf. Stauroneis sp. LACW24 and ocrophyte cf. Phaeothamnion sp. LACW34 increased during growth with a maximum being observed during the late stationary or early death phase (2.5- to 8-fold increases between days 20 and 27). Strains LACW24 and LACW34 contained 5.9 and 3.0 mg g -1 (DW) of the xanthophyll fucoxanthin, respectively. Extracts of strains also showed no cytotoxicity towards mouse cell lines. These results highlight the potential of these strains for biomass valorisation and cultivation upscaling and to be further considered as part of ongoing bioprospecting efforts towards identifying novel species to join the relatively narrow range of commercially exploited marine microalgae species.

In this study, the culture conditions for Porphyridium cruentum were optimized to obtain the maximum biomass and lipid productions. The eicosapentaenoic acid content was increased by pH optimization. P. cruentum was cultured with modified F/2 medium in 14-L photobioreactors using a two-phase culture system, in which the green (520 nm) and red (625 nm) light-emitting diodes (LEDs) were used during the first and second phases for biomass production and lipid production, respectively. Various parameters, including aeration rate, light intensity, photoperiod, and pH were optimized. The maximum biomass concentration of 0.91 g dcw/l was obtained with an aeration rate of 0.75 vvm, a light intensity of 300 μmol m -2 s -1 , and a photoperiod of 24:0 h. The maximum lipid production of 51.8% (w/w) was obtained with a light intensity of 400 μmol m -2 s -1 and a photoperiod of 18:6 h. Additionally, the eicosapentaenoic acid and unsaturated fatty acid contents reached 30.6% to 56.2% at pH 6.0.

There is growing interest in the production of microalgae-based, high-value by-products as an emerging green biotechnology. However, a cultivation platform for Oocystis sp. has yet to be established. We therefore examined the effects of bacterial culture additions on the growth and production of valuable compounds of the microalgal strain Oocystis sp. KNUA044, isolated from a locally adapted region in Korea. The strain grew only in the presence of a clear supernatant of Sphingomonas sp. KNU100 culture solution and generated 28.57 mg/l/d of biomass productivity. Protein content (43.9 wt%) was approximately two-fold higher than carbohydrate content (29.4 wt%) and lipid content (13.9 wt%). Oocystis sp. KNUA044 produced the monosaccharide fucose (33 μg/mg and 0.94 mg/l/d), reported here for the first time. Fatty acid profiling showed high accumulation (over 60%) of polyunsaturated fatty acids (PUFAs) compared to saturated (29.4%) and monounsaturated fatty acids (9.9%) under the same culture conditions. Of these PUFAs, the algal strain produced the highest concentration of linolenic acid (C18:3 ω3; 40.2%) in the omega-3 family and generated eicosapentaenoic acid (C20:5 ω3; 6.0%), also known as EPA. Based on these results, we suggest that the application of Sphingomonas sp. KNU100 for strain-dependent cultivation of Oocystis sp. KNUA044 holds future promise as a bioprocess capable of increasing algal biomass and high-value bioactive by-products, including fucose and PUFAs such as linolenic acid and EPA.

Supplementing cultivation media with exogenous carbon sources enhances biomass and lipid production in microalgae. Utilization of renewable organic carbon from agricultural residues can potentially reduce the cost of algae cultivation, while enhancing sustainability. In the present investigation a medium was developed from sweet sorghum bagasse for cultivation of Chlorella under mixotrophic conditions. Using response surface methodology, the optimal values of critical process parameters were determined, namely inoculum cell density (O.D. 750 ) of 0.786, SSB hydrolysate content of the medium 25% v/v, and zero medium salinity, to achieve maximum lipid productivity of 120 mg/L/d. Enhanced biomass (3.44 g/L) and lipid content (40% of dry cell weight) were observed when the alga was cultivated in SSB hydrolysate under mixotrophic conditions compared to heterotrophic and photoautotrophic conditions. A time course investigation revealed distinct physiological responses in terms of cellular growth and biochemical composition of C. vulgaris cultivated in the various trophic modes. The determined carbohydrate and lipid profiles indicate that sugar addition to the cultivation medium boosts neutral lipid synthesis compared to structural lipids, suggesting that carbon flux is channeled towards triacylglycerol synthesis in the cells. Furthermore, the fatty acid profile of lipids extracted from mixotrophically grown cultures contained more saturated and monosaturated fatty acids, which are suitable for biofuel manufacturing. Scale-up studies in a photobioreactor using SSB hydrolysate achieved a biomass concentration of 2.83 g/L consisting of 34% lipids and 26% carbohydrates. These results confirmed that SSB hydrolysate is a promising feedstock for mixotrophic cultivation of Chlorella and synthesis of algal bioproducts and biofuels.

Microalgae efficiently convert sunlight into lipids and carbohydrates, offering bio-based alternatives for energy and chemical production. Improving algal productivity and robustness against abiotic stress requires a systems level characterization enabled by functional genomics. Here, we characterize a halotolerant microalga Scenedesmus sp. NREL 46B-D3 demonstrating peak growth near 25 °C that reaches 30 g/m 2 /day and the highest biomass accumulation capacity post cell division reported to date for a halotolerant strain. Functional genomics analysis revealed that genes involved in lipid production, ion channels and antiporters are expanded and expressed. Exposure to temperature stress shifts fatty acid metabolism and increases amino acids synthesis. Co-expression analysis shows that many fatty acid biosynthesis genes are overexpressed with specific transcription factors under cold stress. These and other genes involved in the metabolic and regulatory response to temperature stress can be further explored for strain improvement.

The effect of light on biomass and fucoxanthin (Fx) productivities was studied in two microalgae, Tisochrysis lutea and Phaeodactylum tricornutum. High and low biomass concentrations (1.1 and 0.4 g L -1 ) were tested in outdoor pilot-scale flat-panel photobioreactors at semi-continuous cultivation mode. Fluorescence spectroscopy coupled with chemometric modeling was used to develop prediction models for Fx content and for biomass concentration to be applied for both microalgae species. Prediction models showed high R 2 for cell concentration (.93) and Fx content (.77). Biomass productivity was lower for high biomass concentration than low biomass concentration, for both microalgae (1.1 g L -1 : 75.66 and 98.14 mg L -1  d -1 , for T. lutea and P. tricornutum, respectively; 0.4 g L -1 : 129.9 and 158.47 mg L -1  d -1 , T. lutea and P. tricornutum). The same trend was observed in Fx productivity (1.1 g L -1 : 1.14 and 1.41 mg L -1 d -1 , T. lutea and P. tricornutum; 0.4 g L -1 : 2.09 and 1.73 mg L -1  d -1 , T. lutea and P. tricornutum). These results show that biomass and Fx productivities can be set by controlling biomass concentration under outdoor conditions and can be predicted using fluorescence spectroscopy. This monitoring tool opens new possibilities for online process control and optimization., (© 2020 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals LLC.)

Iron and phosphorus (P) are the important micro- and macro-nutrient for microalgae growth, respectively. However, the effect of iron and P on microalgae growth in co-culture associating with the formation of dominate algae has not been investigated before. In the current study, Anabaene flos-aquae, Chlorella vulgaris and Melosira sp. were co-cultivated under the addition of different initial iron and P to reveal the effect of iron and phosphorus on the growth of microalgae. The results showed that the mean growth rate of A. flos-aquae, C. vulgaris and Melosira was 0.270, 0.261 and 0.062, respectively, indicating that the A. flos-aquae and C. vulgaris algae are liable to be the dominant algae while the growth of Melosira was restrained when co-cultured. The ratio of Fe to P has a significant impact on the growth of microalgae and could be regarded as an indicator of algae growth. Microalgae showed a much more obvious uptake of iron compared to that of P. The information obtained in the current study was useful for the forecast of water quality and the control of microalgae bloom.

Biofouling represents an important limitation in photobioreactor cultures. The biofouling propensity of different materials (polystyrene, borosilicate glass, polymethyl methacrylate, and polyethylene terephthalate glycol-modified) and coatings (two spray-applied and nanoparticle-based superhydrophobic coatings and a hydrogel-based fouling release coating) was evaluated by means of a short-term protein test, using bovine serum albumin (BSA) as a model protein, and by the long-term culture of the marine microalga Nannochloropsis gaditana under practical conditions. The results from both methods were similar, confirming that the BSA test predicts microalgal biofouling on surfaces exposed to microalgae cultures whose cells secrete macromolecules, such as proteins, with a high capacity for forming a conditioning film before cell adhesion. The hydrogel-based coating showed significantly reduced BSA and N. gaditana adhesion, whereas the other surfaces failed to control biofouling. Microalgal biofouling was associated with an increased concentration of sticky extracellular proteins at low N/P ratios (below 15)., (© 2020 Wiley Periodicals LLC.)

Accurate short-range (e.g., 7 days) microalgae growth forecasts will be beneficial for both the production and harvesting of microalgae. This study developed an operational microalgae growth forecasting system comprised of the Huesemann Algae Biomass Growth Model (BGM), the Modular Aquatic Simulation System in Two Dimensions (MASS2) hydrodynamic model, and ensemble data assimilation (DA). The novelty of this study is the use of ensemble DA to sequentially update the BGM model's initial condition (IC) with the assimilation of measured biomass optical density to improve short-range biomass forecasting skills. The forecasting system was run in pseudo-real-time and validated against observed Monoraphidium minutum 26B-AM growth in two outdoor pond cultures located in Mesa, Arizona, United States. We found the DA forecasting system could improve the 7-day microalgae forecasting skill by about 85% on average compared to model forecasts without DA. These results suggest the potential accuracy of biomass growth forecasts may be sufficient to inform real-time operational decisions, such as pond operation and harvest planning, for commercial-scale microalgae production., (© 2021 Wiley Periodicals LLC.)

Crude petroleum oil spills are among the most important organic contaminations. While the separated oils accumulated on the surface water are relatively easily removed, the emulsified portions are more difficult to remove and pose significant threats to the environment. Bioremediation using bacteria has proven to be an effective method, but the biomass produced in this case does not have any significant remunerative value. In this work, microalgae were proposed to combine emulsified oil remediation process with the potential of microalgae as a biofuel feedstock, thus enhancing the economic and environmental benefits of the process. A freshwater strain of Chlorella vulgaris was grown in water containing different concentrations of emulsified crude oil at different temperatures. The specific growth rate (μ max ) of the microalgae for each initial oil concentration was determined and was found to increase with the increase in initial oil concentration. For example, at 30°C, the specific growth rate, μ increased from 0.477 to 0.784 per day as the oil concentration increased from 57 to 222 mg/L. At 30°C, the effect of substrate concentration agreed with that of the microalgae growth, whereas at 40°C, the drop in oil concentration decreased with the increase in concentration. The results were fitted to a modified Monod kinetics model that used specific interfacial area as the influential substrate instead of the actual concentration. The results of this study clearly show the potential of using microalgae for emulsified oil remediation at relatively high concentrations., (© 2020 American Institute of Chemical Engineers.)

The architecture of microalgae biofilms has been poorly investigated, in particular with respect to shear stress, which is a crucial factor in biofilm-based reactor design and operation. To investigate how microalgae biofilms respond to different hydrodynamic regimes, the architecture and cohesion of Chlorella vulgaris biofilms were studied in flow-cells at three shear stress: 1.0, 6.5 and 11.0 mPa. Biofilm physical properties and architecture dynamics were monitored using a set of microscopic techniques such as, fluorescence recovery after photobleaching (FRAP) and particle tracking. At low shear, biofilms cohesion was heterogeneous resulting in a strong basal (close to the substrate) layer and in more loose superficial ones. Higher shear (11.0 mPa) significantly increased the cohesion of the biofilms allowing them to grow thicker and to produce more biomass, likely due to a biological response to resist the shear stress. Interestingly, an acclimation strategy seemed also to occur which allowed the biofilms to preserve their growth rate at the different hydrodynamic regimes. Our results are in accordance with those previously reported for bacteria biofilms, revealing some general physical/mechanical rules that govern microalgae life on substrates. These results may bring new insights about how to improve productivity and stability of microalgae biofilm-based systems.

Microalgae can be used as a source of alternative food, animal feed, biofuel, fertilizer, cosmetics, nutraceuticals and for pharmaceutical purposes. The extraction of organic constituents from microalgae cultivated in the different nutrient compositions is influenced by microalgal growth rates, biomass yield and nutritional content in terms of lipid and fatty acid production. In this context, nutrient composition plays an important role in microalgae cultivation, and depletion and excessive sources of this nutrient might affect the quality of biomass. Investigation on the role of nitrogen and phosphorus, which are crucial for the growth of algae, has been addressed. However, there are challenges for enhancing nutrient utilization efficiently for large scale microalgae cultivation. Hence, this study aims to highlight the level of nitrogen and phosphorus required for microalgae cultivation and focuses on the benefits of nitrogen and phosphorus for increasing biomass productivity of microalgae for improved lipid and fatty acid quantities. Furthermore, the suitable extraction methods that can be used to utilize lipid and fatty acids from microalgae for biofuel have also been reviewed.

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilisation of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on production and the use of value-added components obtained from microalgae with current and potential application in the pharmaceutical, nutraceutical, cosmeceutical, energy and agri-food industries, as well as for bioremediation. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.

In this article, the influence of culture conditions (irradiance, temperature, pH, and dissolved oxygen) on the photosynthesis and the respiration rates of microalgae-bacteria consortia in wastewater treatment was analyzed. Specifically, some short photo-respirometric experiments, simulating outdoor raceway reactors, were performed to evaluate the response of microalgae, heterotrophic bacteria, and nitrifying bacteria to variations in environmental parameters. Results demonstrate that irradiance is the most dominant variable to determine microalgae photosynthesis rates. However, reduction in microalgae activity was not observed at higher irradiance, ruling out the existence of photoinhibition phenomena. Related to heterotrophic and nitrifying bacteria, their activities were strongly affected by the influence of temperature and pH. Moreover, the effect of dissolved oxygen concentrations on microalgae, and bacteria activities was studied, displaying a reduced photosynthetic rate at dissolved oxygen concentrations above 20 mg/L. Data have been used to develop an integrated model for each population (microalgae, heterotrophic bacteria, and nitrifying bacteria) based on considering the simultaneous influence of irradiance, temperature, pH, and dissolved oxygen. The models fit the experimental results in the range of culture conditions tested, and they were validated using data obtained by the simultaneous modifications of the variables. These individual models serve as a basis for developing a global biologic microalgae-bacteria model for wastewater treatment to improve the optimal design and management of microalgae-based processes, especially outdoors, where the cultures are subject to variable daily culture conditions., (© 2020 Wiley Periodicals LLC.)

Microalgae are ecologically important species in aquatic ecosystems due to their role as primary producers. The inhibition of growth of microalgae due to dye pollution results in an upheaval in the trophic transfer of nutrients and energy in aquatic ecosystems. Therefore, this investigation aimed to evaluate the toxicity of a textile dye Methylene blue (MB) on two microalgae viz. Chlorella vulgaris and Spirulina platensis. An exposure of the unialgal populations of both the microalgae towards graded concentrations of the dye showed a concentration-dependent decrease in specific growth rate, pigment and protein content. In the toxicity study of 24 -96-h, following the OECD guidelines 201, the EC 50 values of C. vulgaris and S. platensis ranged from 61.81 to 5.43 mg/L and 5.83 to 1.08 mg/L respectively revealing that S. platensis exhibited a higher level of susceptibility towards the dye as compared to C. vulgaris and the latter is more tolerant to the dye toxicity even at higher concentrations. The findings indicate that the response to dye is a species-specific phenomenon. Given the differences in the cell structure and enzymatic pathways in Spirulina platensis (a prokaryote) and Chlorella vulgaris (an eukaryote), the tolerance levels can differ. After 96-h exposure of C. vulgaris to MB (100 mg/L), the chlorophyll-a, b and carotenoid content were reduced 2.5, 5.96 and 3.57 times in comparison to control whereas in S. platensis exposure to MB (10 mg/L), the chlorophyll-a and carotenoid content were reduced 3.59 and 5.08 times in comparison to control. After 96-h exposure of C. vulgaris and S. platensis to the dye (20 mg/L), the protein content was found to be 4.34 and 2.75 times lower than the control. The protein content has decreased in accordance with the increase in dye concentration., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Flat panels are the most spread type of photobioreactors for studying light effects on a microalgae culture. Their low thickness, usually between 1 and 3 cm, aims at ensuring light homogeneity across the culture. Yet because optical density has to remain very low, studies are still limited to low cell density cultures. To alleviate this problem, even thinner photobioreactors can be designed. Nevertheless, thin flat panel reactors are very prone to induce high shear stress. This work aimed at designing a new millimeter thin panel photobioreactor to study light effects on Chlorella and Scenedesmus genera. We proposed a numerical workflow that is capable of assessing the shear stress intensity in such a reactor. The numerical predictions were validated at three different levels: 2D preliminary simulations were able to reproduce bubble commonly known behaviors; close to the nozzle, the predictions were successfully confronted to shadowgraphy experimental reference; at the mini bioreactor scale, experimental and numerical mixing were found to be close. After these throughout validations, shear stress intensity in the photobioreactor was calculated over 1000 Lagrangian tracers. The experienced shear stress was agglomerated at the population level. From the computed shear stress, it was possible to choose the minimal reactor thickness that would not hinder cell growth., (© 2020 International Union of Biochemistry and Molecular Biology, Inc.)

Climate change-induced glacial melt affects benthic ecosystems along the West Antarctic Peninsula, but current understanding of the effects on benthic primary production and respiration is limited. Here we demonstrate with a series of in situ community metabolism measurements that climate-related glacial melt disturbance shifts benthic communities from net autotrophy to heterotrophy. With little glacial melt disturbance (during cold El Niño spring 2015), clear waters enabled high benthic microalgal production, resulting in net autotrophic benthic communities. In contrast, water column turbidity caused by increased glacial melt run-off (summer 2015 and warm La Niña spring 2016) limited benthic microalgal production and turned the benthic communities net heterotrophic. Ongoing accelerations in glacial melt and run-off may steer shallow Antarctic seafloor ecosystems towards net heterotrophy, altering the metabolic balance of benthic communities and potentially impacting the carbon balance and food webs at the Antarctic seafloor.

Soil extracts are useful nutrients to enhance the growth of microalgae. Therefore, the present study attempts for the use of virgin soils from Peninsular Malaysia as growth enhancer. Soils collected from Raja Musa Forest Reserve (RMFR) and Ayer Hitam Forest Reserve (AHFR) were treated using different extraction methods. The total dissolved nitrogen (TDN), total dissolved phosphorus (TDP), and dissolved organic carbon (DOC) concentrations in the autoclave methods were relatively higher than natural extraction with up to 132.0 mg N/L, 10.7 mg P/L, and 2629 mg C/L, respectively for RMFR. The results of TDN, TDP, and DOC suggested that the best extraction methods are autoclaved at 121 °C twice with increasing 87%, 84%, and 95%, respectively. Chlorella vulgaris TRG 4C dominated the growth at 121 °C twice extraction method in the RMRF and AHRF samples, with increasing 54.3% and 14%, respectively. The specific growth rate (µ) of both microalgae were relatively higher, 0.23 d -1 in the Ayer Hitam Soil. This extract served well as a microalgal growth promoter, reducing the cost and the needs for synthetic medium. Mass production of microalgae as aquatic feed will be attempted eventually. The high recovery rate of nutrients has a huge potential to serve as a growth promoter for microalgae.