Search

The application of a novel open, windowless cell for the photoacoustic infrared spectroscopy of human skin is described. This windowless cavity is tuned for optimum performance in the ultrasound range between 50 and 60 kHz. In combination with an external cavity tunable quantum cascade laser emitting in the range from ∼1000 cm-1 to 1245 cm-1, this approach leads to high signal-to-noise-ratio (SNR) for mid-infrared spectra of human skin. This opens the possibility to measure in situ the absorption spectrum of human epidermis in the mid-infrared region at high SNR in a few (∼5) seconds. Rapid measurement of skin spectra greatly reduces artifacts arising from movements. As compared to closed resonance cells, the windowless cell exhibits the advantage that the influence of air pressure variations, temperature changes, and air humidity buildup that are caused by the contact of the cell to the skin surface can be minimized. We demonstrate here that this approach can be used for continuous and non-invasive monitoring of the glucose level in human epidermis, and thus may form the basis for a non-invasive monitoring of the glucose level for diabetes patients. [ABSTRACT FROM AUTHOR]

Demasking of peptide bonds during proteolysis of β-casein and β-lactoglobulin by trypsin was monitored by the measurement of the overall spectral shift of intrinsic protein fluorescence. A clear shift of the apparent emission maxima from approximately 340-345 nm to 355-360 nm during proteolysis was observed, with a time course, which follows protein degradation and structural opening. In contrast to procedures using extrinsic fluorescence labels, this label-free procedure does not bear the risk of structural alterations. It is easy to perform, fast, and has a relatively high accuracy of determination. Proteolysis was modelled as simple two-step process with consecutive demasking and hydrolysis stages. It was shown that the fluorescence shift can be attributed to the demasking stage. Formally, kinetics of the peptide bond demasking obeys a first-order kinetic law. Both the theoretical simulations and experiment are in accordance giving the similar dependences of the hydrolysis degree on the degree of peptide bond demasking. [ABSTRACT FROM AUTHOR]

Lipopolysaccharides (LPSs) from Gram-negative bacteria are strong elicitors of the human immune systems. There is strong evidence that aggregates and not monomers of LPS play a decisive role at least in the initial stages of cell activation of immune cells such as mononuclear cells. In previous reports, it was shown that the biologically most active part of enterobacterial LPS, hexa-acyl bisphosphorylated lipid A, adopts a particular supramolecular conformation, a cubic aggregate structure. However, little is known about the size and morphology of these aggregates, regarding the fact that LPS may have strong variations in the length of the saccharide chains (various rough mutant and smooth-form LPS). Thus, in the present paper, several techniques for the determination of details of the aggregate morphology such as freeze-fracture and cryo-electron microscopy, analytical ultracentrifugation, laser backscattering analysis, and small-angle X-ray scattering were applied for various endotoxin (lipid A and different LPS) preparations. The data show a variety of different morphologies not only for different endotoxins but also when comparing different applied techniques. The data are interpreted with respect to the suitability of the single techniques, in particular on the basis of available literature data. [ABSTRACT FROM PUBLISHER]

The caa 3 -oxidase from Thermus thermophilus has been studied with a combined electrochemical, UV/VIS and Fourier-transform infrared (FT-IR) spectroscopic approach. In this oxidase the electron donor, cytochrome c , is covalently bound to subunit II of the cytochrome c oxidase. Oxidative electrochemical redox titrations in the visible spectral range yielded a midpoint potential of -0.01 ± 0.01 V (vs. Ag/AgCl/3m KCl, 0.218 V vs. SHE′) for the heme c . This potential differs for about 50 mV from the midpoint potential of isolated cytochrome c , indicating the possible shifts of the cytochrome c potential when bound to cytochrome c oxidase. For the signals where the hemes a and a 3 contribute, three potentials, = -0.075 V ± 0.01 V, E m2 = 0.04 V ± 0.01 V and E m3 = 0.17 V ± 0.02 V (0.133, 0.248 and 0.378 V vs. SHE′, respectively) could be obtained. Potential titrations after addition of the inhibitor cyanide yielded a midpoint potential of -0.22 V ± 0.01 V for heme a 3 -CN– and of E m2 = 0.00 V ± 0.02 V and E m3 = 0.17 V ± 0.02 V for heme a (-0.012 V, 0.208 V and 0.378 V vs. SHE′, respectively). The three phases of the potential-dependent development of the difference signals can be attributed to the cooperativity between the hemes a , a 3 and the CuB center, showing typical behavior for cytochrome c oxidases. A stronger cooperativity of CuB is discussed to reflect the modulation of the enzyme to the different key residues involved in proton pumping. We thus studied the FT-IR spectroscopic properties of this enzyme to identify alternative protonatable sites. The vibrational modes of a protonated aspartic or glutamic acid at 1714 cm-1 concomitant with the reduced form of the protein can be identified, a mode which is not present for other cytochrome c oxidases.... [ABSTRACT FROM AUTHOR]

The method of Fourier-transform infrared difference spectroscopy was applied to investigate the transition at 77 K of bacteriorhodopsin in its light-adapted form to K610, the first intermediate which is stable at low temperature. In addition to unmodified bacteriorhodopsin, bacteriorhodopsin in 2H2O and bacteriorhodopsin containing [15- 2H]retinal was used. The results show that major rearrangements occur in the Schiff base in this transition. It is not possible to identify a C = N stretching vibration of the Schiff base in K610. The identification of an N-H bending vibration in K610 shows that the nitrogen of the previous Schiff base still has a proton attached. The fingerprint region exhibits very unusual features for K610 and bears no similarity to protonated retinylidene Schiff base model compounds of any isomeric composition. Therefore, no conclusions on the isomeric state of the retinal in K610 can be drawn. The spectra show that the terminal part of the retinal is predominantly reflected in the difference spectra. This indicates that the most polar part of the retinal is located near the Schiff base. We have evidence for protein molecular changes occurring in this transition at 77 K. [ABSTRACT FROM AUTHOR]

We have developed a new technique for the study of redox-linked conformational changes in proteins, by the combination of two established techniques. Fourier-transform infrared spectroscopy has been used together with direct electrochemistry of the protein at a modified metal electrode surface. The technique has been evaluated with cytochrome c. because of its well-characterized electrochemistry and because the availability of X-ray crystallographic and NMR studies of both redox states of the protein provides a reference against which our data can be compared. In electrochemical control experiments, it was confirmed that the spectroelectrochemical cell design allows fast, accurate and reproducible control of the redox poise of the protein. The resulting reduced-minus-oxidized infrared difference spectra show the changes in the frequencies and intensities of molecular vibrations which arise from the redox-linked conformational change. In contrast to the absolute infrared spectra of proteins, such difference spectra can be sufficiently straightforward to allow interpretation at the level of individual bonds. A complete interpretation of the spectra is beyond the scope of the present paper: however, on the basis of the data presented, we are able to suggest assignments for all except one of the major bands between 1500 cm-1 and 1800 cm -1. [ABSTRACT FROM AUTHOR]

The pyruvate oxidases from Escherichia coli (EcPOX) and Lactobacillus plantarum (LpPOX) are both thiamin‐dependent flavoenzymes. Their sequence and structure are closely related, and they catalyse similar reactions—but they differ in their activity pattern: LpPOX is always highly active, EcPOX only when activated by lipids or limited proteolysis, both involving the protein's C‐terminal 23 residues (the 'α‐peptide'). Here, we relate the redox‐induced infrared (IR) difference spectrum of EcPOX to its unusual activation mechanism. The IR difference spectrum of EcPOX is marked by contributions from the protein backbone, reflecting major conformational changes. A rare sulfhydryl (−SH) difference signal indicates changes in the vicinity of cysteines. We could pin the Cys–SH difference signal to Cys88 and Cys494, both being remote from the moving α‐peptide and the redox‐active flavin cofactor. Yet, when the α‐peptide is proteolytically removed, the Cys–SH difference signal disappears, together with several difference signals in the amide range. The remaining IR signature of the permanently activated EcPOXΔ23 is strikingly similar to the simpler signature of LpPOX. The loss of the α‐peptide 'transforms' the catalytically complex EcPOX into the catalytically 'simpler' LpPOX. [ABSTRACT FROM AUTHOR]

Human and bovine serum albumins are widely known proteins that can form amyloid fibrils under destabilizing conditions. Use of well-known proteins with easily-controlled aggregation process, and comparison of these processes for similar proteins from different species, could help elucidate the nature of the aggregation process implicated in many degenerative diseases, for example Alzheimer's, Parkinson's, or type II diabetes. In this work both amyloidogenic mechanisms have been studied by use of infrared spectroscopy in combination with static light scattering, enabling analysis of intra and intermolecular processes and measurement of prefibril and fibril growing quasi-simultaneously. Deeper insight into the rearrangements of the secondary structure of the proteins concomitant with the aggregation process has also been gained by mathematical analysis of the infrared spectra by two-dimensional correlation spectroscopy (2DCOS). [ABSTRACT FROM AUTHOR]

Abstract: Interstitial fluid, i.e. the liquid present in the outermost layer of living cells of the skin between the Stratum corneum and the Stratum spinosum, was analyzed by Fourier transform infrared spectroscopy and by infrared spectroscopy using pulsed quantum cascade infrared lasers with photoacoustic detection. IR spectra of simulated interstitial fluid samples and of real samples from volunteers in the 850–1800cm−1 range revealed that the major components of interstitial fluid are albumin and glucose within the physiological range, with only traces of sodium lactate if at all. The IR absorbance of glucose in interstitial fluid in vivo was probed in healthy volunteers using a setup with quantum cascade lasers and photoacoustic detection previously described . A variation of blood glucose between approx. 80mg/dl and 250mg/dl in the volunteers was obtained using the standard oral glucose tolerance test (OGT). At two IR wavelengths, 1054cm−1 and 1084cm−1, a reasonable correlation between the photoacoustic signal from the skin and the blood glucose value as determined by conventional glucose test sticks using blood from the finger tip was obtained. The infrared photoacoustic glucose signal (PAGS) may serve as the key for a non-invasive glucose measurement, since the glucose content in interstitial fluid closely follows blood glucose in the time course and in the level (a delay of some minutes and a level of approx. 80–90% of the glucose level in blood). Interstitial fluid is present in skin layers at a depth of only 15–50μm and is thus within the reach of mid-IR energy in an absorbance measurement. A non-invasive glucose measurement for diabetes patients based on mid-infrared quantum cascade lasers and photoacoustic detection could replace the conventional measurement using enzymatic test stripes and a drop of blood from the finger tip, thus reducing pain and being a cost-efficient alternative for millions of diabetes patients. [Copyright &y& Elsevier]

Abstract: Nanoparticles represent promising carriers for controlled drug delivery. Particle size and size distribution of the particles are important parameters for the in vivo behaviour after intravenous injection and have to be characterised precisely. In the present study, the influence of lyophilisation on the storage stability of poly(d,l lactic-co-glycolic acid) (PLGA) nanoparticles, formulated with several cryoprotective agents, was evaluated. Nanoparticles were prepared by a high pressure solvent evaporation method and freeze-dried in the presence of 1%, 2%, and 3% (m/v) sucrose, trehalose, and mannitol, respectively. Additionally, to all samples containing 3% of the excipients, l-arginine hydrochloride was added in concentrations of 2.1% or 8.4% (m/V). Dynamic light scattering (DLS), analytical ultracentrifugation and transmission electron microscopy (TEM) were used for particle characterisation before and after freeze-drying and subsequent reconstitution. In addition, glass transition temperatures were determined by differential scanning calorimetry (DSC), and the residual moisture of the lyophilisates was analysed by Karl Fischer titration. It was demonstrated that 1% sucrose or 2% trehalose were suitable to maintain particle integrity after reconstitution of lyophilised PLGA nanoparticles. The storage stability study over 3months showed notable changes in mean particle size, size distribution, and residual moisture content, depending on the composition of the formulation. [Copyright &y& Elsevier]

We have recently reported infrared spectroscopy of human skin in vivo using quantum cascade laser excitation and photoacoustic or photothermal detection for non-invasive glucose measurement . Here, we analyze the IR light diffusely reflected from skin layers for spectral contributions of glucose. Excitation of human skin by an external cavity tunable quantum cascade laser in the spectral region from 1000 to 1245 cm − 1 , where glucose exhibits a fingerprint absorption, yields reflectance spectra with some contributions from glucose molecules. A simple three-layer model of skin was used to calculate the scattering intensities from the surface and from shallow and deeper layers using the Boltzmann radiation transfer equation. Backscattering of light at wavelengths around 10 μm from the living skin occurs mostly from the Stratum corneum top layers and the shallow layers of the living epidermis. The analysis of the polarization of the backscattered light confirms this calculation. Polarization is essentially unchanged; only a very small fraction (< 3%) is depolarized at 90° with respect to the laser polarization set at 0°. Based on these findings, we propose that the predominant part of the backscattered light is due to specular reflectance and to scattering from layers close to the surface. Diffusely reflected light from deeper layers undergoing one or more scattering processes would appear with significantly altered polarization. We thus conclude that a non-invasive glucose measurement based on backscattering of IR light from skin would have the drawback that only shallow layers containing some glucose at concentrations only weakly related to blood glucose are monitored. [ABSTRACT FROM AUTHOR]

The dispersion releaser (DR) is a dialysis-based setup for the analysis of the drug release from nanosized drug carriers. It is mounted into dissolution apparatus 2 of the United States Pharmacopoeia. The present study evaluated the DR technique investigating the drug release of the model compound flurbiprofen from drug solution and from nanoformulations composed of the drug and the polymer materials poly (lactic acid), poly (lactic-co-glycolic acid) or Eudragit® RS PO. The drug loaded nanocarriers ranged in size between 185.9 and 273.6 nm and were characterized by a monomodal size distribution (PDI < 0.1). The membrane permeability constants of flurbiprofen were calculated and mathematical modeling was applied to obtain the normalized drug release profiles. For comparing the sensitivities of the DR and the dialysis bag technique, the differences in the membrane permeation rates were calculated. Finally, different formulation designs of flurbiprofen were sensitively discriminated using the DR technology. The mechanism of drug release from the nanosized carriers was analyzed by applying two mathematical models described previously, the reciprocal powered time model and the three parameter model. [ABSTRACT FROM AUTHOR]

The performance of solar energy conversion into alternative energy sources in artificial systems highly depends on the thermostability of photosystem I (PSI) complexes Terasaki et al. (2007), Iwuchukwu et al. (2010), Kothe et al. (2013) . To assess the thermostability of PSI complexes from the thermophilic cyanobacterium Thermosynechococcus elongatus heating induced perturbations on the level of secondary structure of the proteins were studied. Changes were monitored by Fourier transform infrared (FT-IR) spectra in the mid-IR region upon slow heating (1 °C per minute) of samples in D 2 O phosphate buffer (pD 7.4) from 20 °C to 100 °C. These spectra showed distinct changes in the Amide I region of PSI complexes as a function of the rising temperature. Absorbance at the Amide I maximum of PSI monomers (centered around 1653 cm − 1 ), gradually dropped in two temperature intervals, i.e. 60–75 and 80–90 °C. In contrast, absorbance at the Amide I maximum of PSI trimers (around 1656 cm − 1 ) dropped only in one temperature interval 80–95 °C. The thermal profile of the spectral shift of α-helices bands in the region 1656–1642 cm − 1 confirms the same two temperature intervals for PSI monomers and only one interval for trimers. Apparently, the observed absorbance changes at the Amide I maximum during heating of PSI monomers and trimers are caused by deformation and unfolding of α-helices. The absence of absorbance changes in the interval of 20–65 °C in PSI trimers is probably caused by a greater stability of protein secondary structure as compared to that in monomers. Upon heating above 80 °C a large part of α-helices both in trimers and monomers converts to unordered and aggregated structures. Spectral changes of PSI trimers and monomers heated up to 100 °C are irreversible due to protein denaturation and non-specific aggregation of complexes leading to new absorption bands at 1618–1620 cm − 1 . We propose that monomers shield the denaturation sensitive sides at the monomer/monomer interface within a trimer, making the oligomeric structure more stable against thermal stress. [ABSTRACT FROM AUTHOR]

As a rapidly growing class of therapeutics, biopharmaceuticals have conquered the global market. Despite the great potential from a therapeutic perspective, such formulations often require frequent injections due to their short half-life. Aiming to establish a parenteral dosage form with prolonged release properties, a biodegradable implant was developed, based on a combination of nanoencapsulation of protein-heparin complexes, creation of a slow release matrix by freeze-drying, and compression using hyaluronan and methylcellulose. In order to investigate this novel delivery system, formulations containing IFN-β-1a and trypsinogen as model proteins were developed. No degradation of the proteins was observed at any stage of the formulation processing. The potential of the delivery system was evaluated in vivo and in vitro after fluorescence-labeling of the biopharmaceuticals. An optimized agarose gel was utilized as in vitro release medium to simulate the subcutaneous environment in a biorelevant manner. In addition, the formulations were administered to female SJL mice and release was innovatively tracked by fluorescence imaging, setting up an in vitro-in vivo correlation. A prolonged time of residence of approximately 12 days was observed for the selected formulation design. [ABSTRACT FROM AUTHOR]

Enzymatically-induced degradation of bovine serum albumin (BSA) by serine proteases (trypsin and α-chymotrypsin) in various concentrations was monitored by means of Fourier transform infrared (FT-IR) and ultraviolet circular dichroism (UV-CD) spectroscopy. In this study, the applicability of both spectroscopies to monitor the proteolysis process in real time has been proven, by tracking the spectral changes together with secondary structure analysis of BSA as proteolysis proceeds. On the basis of the FTIR spectra and the changes in the amide I band region, we suggest the progression of proteolysis process via conversion of α-helices (1654 cm − 1 ) into unordered structures and an increase in the concentration of free carboxylates (absorption of 1593 and 1402 cm − 1 ). For the first time, the correlation between the degree of hydrolysis and the concentration of carboxylic groups measured by FTIR spectroscopy was revealed as well. The far UV-CD spectra together with their secondary structure analysis suggest that the α-helical content decreases concomitant with an increase in the unordered structure. Both spectroscopic techniques also demonstrate that there are similar but less spectral changes of BSA for the trypsin attack than for α-chymotrypsin although the substrate/enzyme ratio is taken the same. [ABSTRACT FROM AUTHOR]

The Na+-coupled betaine symporter BetP senses changes in the membrane state and increasing levels of cytoplasmic K+ during hyperosmotic stress latter via its C-terminal domain and regulates transport activity according to both stimuli. This intriguing sensing and regulation behavior of BetP was intensively studied in the past. It was shown by several biochemical studies that activation and regulation depends crucially on the lipid composition of the surrounding membrane. In fact, BetP is active and regulated only when negatively charged lipids are present. Recent structural studies have revealed binding of phosphatidylglycerol lipids to functional important parts of BetP, suggesting a functional role of lipid interactions. However, a regulatory role of lipid interactions could only be speculated from the snapshot provided by the crystal structure. Here, we investigate the nature of lipid-protein interactions of BetP reconstituted in closely packed two-dimensional crystals of negatively charged lipids and probed at the molecular level with Fourier transform infrared (FTIR) spectroscopy. The FTIR data indicate that K+ binding weakens the interaction of BetP especially with the anionic lipid head groups. We suggest a regulation mechanism in which lipid-protein interactions, especially with the C-terminal domain and the functional important gating helices transmembrane helice 3 (TMH3) and TMH12, confine BetP to its down-regulated transport state. As BetP is also activated by changes in the physical state of the membrane, our results point toward a more general mechanism of how active transport can be modified by dynamic lipid-protein interactions. [ABSTRACT FROM AUTHOR]

The aim of the present investigation was to develop a reliable method which can be applied to the measurement of in vitro drug release from nanocarriers. Since the limited membrane transport is one major obstacle to the assessment of drug release with dialysis techniques, the determination of this parameter was our objective. Therefore, a novel drug release automatic monitoring system ( DREAMS ) was designed to conduct continuous measurements during the dialysis process. Moreover, a mathematical model was used for evaluation of the experimental data. This combination of mathematical and analytical tools enabled the quantification of the total amount of free drug in the system. Eudragit ® RS 100 nanoparticles loaded with the model compound 5,10,15,20-tetrakis(m-hydroxypheny)chlorin ( m THPC) were investigated and the drug release was continuously monitored by using a fluorescence spectrometer that is part of the setup. Free drug and drug-loaded nanoparticles were tested to discriminate between the two formulations. In addition, two types of membranes composed of different materials were evaluated and the kinetics of membrane transport was determined. The data obtained from the apparatus were further treated by a mathematical model, which yielded distinguishable release profiles between samples of different compositions. The method offers a promising option for release testing of nanoparticles. [ABSTRACT FROM AUTHOR]

Purpose: Industrial production of nanosized drug delivery devices is still an obstacle to the commercialization of nanomedicines. This study encompasses the development of nanoparticles for peroral application in photodynamic therapy, optimization according to the selected product specifications, and the translation into a continuous flow process. Methods: Polymeric nanoparticles were prepared by nanoprecipitation of Eudragit® RS 100 in presence and in absence of glycofurol. The photosensitizer temoporfin has been encapsulated into these carrier devices. Process parameters were optimized by means of a Design of Experiments approach and nanoparticles with optimal characteristics were manufactured by using microreactor technology. The efficacy was determined by means of cell culture models in A-253 cells. Results: Physicochemical properties of nanoparticles achieved by nanoprecipitation from ethanolic solutions were superior to those obtained from a method based upon glycofurol. Nanoencapsulation of temoporfin into the matrix significantly reduced toxicity of this compound, while the efficacy was maintained. The release profiles assured a sustained release at the site of action. Finally, the transfer to continuous flow technology was achieved. Conclusion: By adjusting all process parameters, a potent formulation for application in the GI tract was obtained. The essential steps of process development and scale-up were part of this formulation development. [ABSTRACT FROM AUTHOR]