Search

An integrated microfluidic system capable of automatically identifying aptamers specific to cholangiocarcinoma (CCA) cells was developed herein. The developed system was capable of performing cell-based systematic evolution of ligands via an exponential enrichment (Cell-SELEX) process on-chip, and only six rounds of Cell-SELEX were required to identify high specificity aptamers; this represents a significant improvement in speed over conventional SELEX, in which 15-20 rounds are typically required. Using the microfluidic chip developed, three aptamers specific to CCA cells (one for SNU-478 cells and two for HuCCT-1 cells) were successfully screened. This automated system could be modified to uncover aptamer probes against other cancer cells, thereby allowing for earlier diagnosis and consequently a potentially improved prognosis.

Gynecological cancer is difficult to be diagnosed at early stages. The relatively high mortality rate has been a serious issue accordingly. We herein reported a diagnosis method by using circulating tumor cells (CTCs) which have been extensively explored as a potential tool for diagnostics and prognostics of ovarian cancers. Nonetheless, the detection of CTCs still remains a challenge because of the difficulty in isolating them from whole blood samples since they are shed into the vasculature from primary tumors and circulate irregularly in the bloodstream in extremely low concentrations. In this work, we reported a new, integrated microfluidic system capable of (1) red blood cells lysis, (2) white blood cell (WBC) depletion via a negative selection process, and (3) capture of target cancer cells from whole blood samples using aptamer-binding technology. Furthermore, this is the first time that an aptamer was used to capture ovarian cancer cells owing to its high affinity. The new microfluidic chip could efficiently perform the entire process in one hour without human intervention at a high recovery rate and a low false positive detection rate when compared with antibody-based systems. A high recovery rate for the isolation of CTCs within a short period of time has been reported when compared to the traditional negative or positive selection approach by using traditional antibody biomarkers. More importantly, "false positive" results from WBCs could be significantly alleviated due to the high specificity of the cancer cell-specific aptamers. The developed integrated microfluidic system could be promising for the isolation and detection of CTCs, which could be used for early diagnosis and prognosis of cancers.

Cholangiocarcinoma (CCA), a biliary tract malignancy, accounts for 20% of all liver cancers. There are several existing methods for diagnosis of CCA, though they are generally expensive, laborious, and suffer from low detection rates. Herein we first developed a means of partially purifying human bile for consequent injection into a microfluidic chip. Then, the novel microfluidic system, which featured 1) a cell capture module, 2) an immunofluorescence (IF) staining module featuring two CCA-specific biomarkers, and 3) an optical detection module for visualization of antibody probes bound to these CCA marker proteins, was used to detect bile duct cancer cells within partially purified bile samples. As a proof of concept, CCA cells were successfully captured and identified from CCA cell cultures, blood samples inoculated with CCA cells, and clinical bile specimens. In 7.5 ml of bile, this system could detect >2, 0, and 1 positive cells in advanced stage patients, healthy patients, and chemotherapy-treated patients, respectively. In conclusion, our microfluidic system could be a promising tool for detection of cancer cells in bile, even at the earliest stages of CCA when cancer cells are at low densities relative to the total population of epithelial cells.

Drug cocktails have been popular for a variety of therapies of complicated diseases. Nevertheless, it is a tediously challenging task to optimize formulations, especially using traditional methods. Hence, an automatic system capable of precise dispensing multiple drugs is of great need. Herein, a new integrated microfluidic system combined with a two-axis traverse module was developed to dispense and mix a small amount of drug combination precisely and automatically. This on-chip dispensing process could be performed with a precise and accurate manner when compared to the manual operations. The efficacy of both single and multiple drugs could be examined through the developed microfluidic system with extremely low variation of drug formulations. Analysis of cell viabilities for normal and tumor cells was also performed to verify potential drug combinations. It is envisioned that this automatic system, which is flexible to combine with standard cell analysis methods and novel drug formulation algorithm, could provide precise and high-throughput drug cocktail formulations and expedite the drug screening processes.

Intelligent video surveillance systems detect pre-configured surveillance events through background modeling, foreground and object extraction, object tracking, and event detection. Shadow regions inside video frames sometimes appear as foreground objects, interfere with ensuing processes, and finally degrade the event detection performance of the systems. Conventional studies have mostly used intensity, color, texture, and geometric information to perform shadow detection in daytime video, but these methods lack the capability of removing shadows in nighttime video. In this paper, a novel shadow detection algorithm for nighttime video is proposed; this algorithm partitions each foreground object based on the object's vertical histogram and screens out shadow objects by validating their orientations heading toward regions of light sources. From the experimental results, it can be seen that the proposed algorithm shows more than 93.8% shadow removal and 89.9% object extraction rates for nighttime video sequences, and the algorithm outperforms conventional shadow removal algorithms designed for daytime videos.

Vancomycin-resistant Enterococcus (VRE) is a kind of enterococci, which shows resistance toward antibiotics. It may last for a long period of time and meanwhile transmit the vancomycin-resistant gene ( vanA ) to other bacteria. In the United States alone, the resistant rate of Enterococcus to vancomycin increased from a mere 0.3% to a whopping 40% in the past two decades. Therefore, timely diagnosis and control of VRE is of great need so that clinicians can prevent patients from becoming infected. Nowadays, VRE is diagnosed by antibiotic susceptibility test or molecular diagnosis assays such as matrix-assisted laser desorption ionization/time-of-flight mass spectrometry and polymerase chain reaction. However, the existing diagnostic methods have some drawbacks, for example, time-consumption, no genetic information, or high false-positive rate. This study reports an integrated microfluidic system, which can automatically identify the vancomycin resistant gene ( vanA ) from live bacteria in clinical samples. A new approach using ethidium monoazide, nucleic acid specific probes, low temperature chemical lysis, and loop-mediated isothermal amplification (LAMP) has been presented. The experimental results showed that the developed system can detect the vanA gene from live Enterococcus in joint fluid samples with detection limit as low as 10 colony formation units/reaction within 1 h. This is the first time that an integrated microfluidic system has been demonstrated to detect vanA gene from live bacteria by using the LAMP approach. With its high sensitivity and accuracy, the proposed system may be useful to monitor antibiotic resistance genes from live bacteria in clinical samples in the near future.

The aim of this study was to measure the air concentrations of carbon dioxide (CO 2 ) and formaldehyde (HCHO) in daycare centers to determine relevant influencing factors, including temperature, relative humidity (RH), type of facility, number of children, type of ventilation system, ventilation time, and air cleaning system. The authors measured HCHO, CO 2 , temperature, and RH in the center of classrooms in 289 daycare centers. Spearman's correlation and Mann-Whitney analyses were used to examine the relationships and differences in HCHO and CO 2 for varying temperatures, RH values, and categorical indoor environmental factors. There were no significant differences in the HCHO and CO 2 air concentrations with varying numbers of children, ventilation times, or ventilation and air cleaning system types. However, both the HCHO and CO 2 air concentrations were significantly different for varying RH values, which were divided into five categories (p < 0.001). Only the HCHO air concentrations were significantly different for varying temperatures, which were divided into five categories (p < 0.001). Significant correlations were found between HCHO air concentrations and the temperature (r = 0.35, p < 0.0001), RH (r = 0.51, p < 0.0001), and CO 2 (r = 0.36, p < 0.0001). The study results support maintaining an appropriate temperature and RH range for reducing airborne HCHO in daycare centers. Further research is needed to elucidate the precise mechanisms responsible for the relationships observed in this study., Implications: Data from 289 daycare centers in Seoul, South Korea, indicate that HCHO concentrations show a positive correlation with indoor temperature and relative humidity. This indicates that keeping temperatures low will help keep HCHO concentrations low, by both a direct and an indirect effect, since low temperatures also cause low relative humidity.

Bacterial resistance to antimicrobial compounds is increasing at a faster rate than the development of new antibiotics; this represents a critical challenge for clinicians worldwide. Normally, the minimum inhibitory concentration of an antibiotic, the dosage at which bacterial growth is thwarted, provides an effective quantitative measure for antimicrobial susceptibility testing, and determination of minimum inhibitory concentration is conventionally performed by either a serial broth dilution method or with the commercially available Etest ® (Biomerieux, France) kit. However, these techniques are relatively labor-intensive and require a significant amount of training. In order to reduce human error and increase operation simplicity, a simple microfluidic device that can perform antimicrobial susceptibility testing automatically via a broth dilution method to accurately determine the minimum inhibitory concentration was developed herein. As a proof of concept, wild-type (ATCC 29212) and vancomycin-resistant Enterococcus cells were incubated at five different vancomycin concentrations on-chip, and the sample injection, transport, and mixing processes occurred within five reaction chambers and three reagent chambers via the chip's automatic dispensation and dilution functions within nine minutes. The minimum inhibitory concentration values measured after 24h of antibiotic incubation were similar to those calculated using Etest ® . With its high flexibility, reliability, and portability, the developed microfluidic device provides a simple method for antimicrobial susceptibility testing in an automated format that could be implemented for clinical and point-of-care applications., (Copyright © 2016 Elsevier B.V. All rights reserved.)

DNA aptamers that can bind specific molecular targets have great potential as probes for microbial diagnostic applications. However, aptamers may change their conformation under different operating conditions, thus affecting their affinity and specificity towards the target molecules. In this study, a new integrated microfluidic system was developed that exploited the predictable change in conformation of a single universal influenza aptamer exposed to differing ion concentrations in order to detect multiple types of the influenza virus. Furthermore, the fluorescent-labeled universal aptamer used in this system could distinguish and detect three different influenza viruses (influenza A H1N1, H3N2, and influenza B) at the same time in 20min and therefore has great potential for point-of-care applications requiring rapid diagnosis of influenza viruses., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The synthesis and assembly of components are key steps in micro/nano device manufacturing. In this article, we report an optically controlled assembly method that can rapidly pattern micro/nano devices by directly assembling ions and nanomaterials without expensive physical masks and complex etching processes. Utilizing this controllable process, different types of device components (e.g., metallic and semiconductor) can be fabricated and assembled in 10-30 seconds, which is far more rapid and cost-effective than any other micro/nano fabrication method.

The rapid spread of influenza-associated H1N1 viruses has caused serious concern in recent years. Therefore, there is an urgent need for the development of automatic, point-of-care devices for rapid diagnosis of the influenza virus. Conventional approaches suffer from several critical issues; notably, they are time-consuming, labor-intensive, and are characterized by relatively low sensitivity. In this work, we present a new approach for fluorescence-based detection of the influenza A H1N1 virus using a sandwich-based aptamer assay that is automatically performed on an integrated microfluidic system. The entire detection process was shortened to 30min using this chip-based system which is much faster than the conventional viral culture method. The limit of detection was significantly improved to 0.032 hemagglutination unit due to the high affinity and high specificity of the H1N1-specific aptamers. The results showed that the two-aptamer microfluidic system had about 10(3) times higher sensitivity than the conventional serological diagnosis. It was demonstrated that the developed microfluidic system may play as a powerful tool in the detection of the H1N1 virus., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Microfluidic technologies have miniaturized a variety of biomedical applications, and these chip-based systems have several significant advantages over their large-scale counterparts. Recently, this technology has been used for automating labor-intensive and time-consuming screening processes, whereby affinity reagents, including aptamers, peptides, antibodies, polysaccharides, glycoproteins, and a variety of small molecules, are used to probe for molecular biomarkers. When compared to conventional methods, the microfluidic approaches are faster, more compact, require considerably smaller quantities of samples and reagents, and can be automated. Furthermore, they allow for more precise control of reaction conditions (e.g., pH, temperature, and shearing forces) such that more efficient screening can be performed. A variety of affinity reagents for targeting cancer cells or cancer biomarkers are now available and will likely replace conventional antibodies. In this review article, the selection of affinity reagents for cancer cells or cancer biomarkers on microfluidic platforms is reviewed with the aim of highlighting the utility of such approaches in cancer diagnostics.

We present a new digitally controlled, optically induced electrochemical deposition (OED) method for fabricating silver nanostructures. Projected light patterns were used to induce an electrochemical reaction in a specialized sandwich-like microfluidic device composed of one indium tin oxide (ITO) glass electrode and an optically sensitive-layer-covered ITO electrode. Silver polyhedral nanoparticles, triangular and hexagonal nanoplates, and nanobelts were controllably synthesized in specific positions at which projected light was illuminated. The silver nanobelts had rectangular cross-sections with an average width of 300 nm and an average thickness of 100 nm. By controlling the applied voltage, frequency, and time, different silver nanostructure morphologies were obtained. Based on the classic electric double-layer theory, a dynamic process of reduction and crystallization can be described in terms of three phases. Because it is template- and surfactant-free, the digitally controlled OED method facilitates the easy, low cost, efficient, and flexible synthesis of functional silver nanostructures, especially quasi-one-dimensional nanobelts.

Diabetes can be diagnosed and monitored by measurement of the cutoff ratio between glycated hemoglobins (HbA1c) and total hemoglobin (Hb), which does not require a fasting blood sample and is less influenced by biological variations. In this study, we combined the advantages of the microfluidic system and the selected low-cost, stable and specific aptamers and developed an integrated, aptamer-based microfluidic system for automatic glycated hemoglobin measurements. The detection process of human whole blood can be totally automated in this integrated microfluidic system. According to the experimental results, when compared to conventional bench-top manual assays, reagent consumption was significantly reduced by 75%, and the analysis time was reduced from 3.5h to 30 min. Besides, the novelty in this research also lies in the simultaneously performed two parallel assays for detection of Hb and HbA1c in a single chip. Therefore, this sensitive and low-cost aptamer-based microfluidic system may become a promising tool for point-of -care diagnosis of diabetes., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The extraction of a cell's nucleus is an essential technique required for a number of procedures, such as disease diagnosis, genetic replication, and animal cloning. However, existing nucleus extraction techniques are relatively inefficient and labor-intensive. Therefore, this study presents an innovative, microfluidics-based approach featuring optically-induced cell lysis (OICL) for nucleus extraction and collection in an automatic format. In comparison to previous micro-devices designed for nucleus extraction, the new OICL device designed herein is superior in terms of flexibility, selectivity, and efficiency. To facilitate this OICL module for continuous nucleus extraction, we further integrated an optically-induced dielectrophoresis (ODEP) module with the OICL device within the microfluidic chip. This on-chip integration circumvents the need for highly trained personnel and expensive, cumbersome equipment. Specifically, this microfluidic system automates four steps by 1) automatically focusing and transporting cells, 2) releasing the nuclei on the OICL module, 3) isolating the nuclei on the ODEP module, and 4) collecting the nuclei in the outlet chamber. The efficiency of cell membrane lysis and the ODEP nucleus separation was measured to be 78.04 ± 5.70% and 80.90 ± 5.98%, respectively, leading to an overall nucleus extraction efficiency of 58.21 ± 2.21%. These results demonstrate that this microfluidics-based system can successfully perform nucleus extraction, and the integrated platform is therefore promising in cell fusion technology with the goal of achieving genetic replication, or even animal cloning, in the near future.

Helicobacter pylori (H. pylori) is a species of bacteria that can colonize the human stomach mucosa. It is closely associated with gastric diseases such as ulcer and inflammation. Recently, some H. pylori strains were found to express resistance to a family of antibiotics known as quinolones due to single-point mutations. Although traditional polymerase chain reaction (PCR) and molecular diagnostic-based approaches can be used to determine the presence and abundance of antibiotic-resistant H. pylori strains, such processes are relatively expensive, labor-intensive, and require bulky and costly equipment. This study therefore reports an advanced diagnostic assay performed on an integrated microfluidic system for rapid detection of antibiotic resistance in H. pylori. The assay features three components: (1) nucleic acid extraction by specific probe-conjugated magnetic beads, (2) amplification of the target deoxyribonucleic acid (DNA) fragments by using single-nucleotide-polymorphism polymerase chain reaction (SNP-PCR), and (3) optical detection of the PCR products. The device integrates several microfluidic components including micro-pumps, normally-closed micro-valves, and reaction chambers such that the entire diagnostic assay can be automatically executed on a single microfluidic system within one hour with detection limits of 10(0), 10(2), and 10(2) bacterial cells for H. pylori detection and two different SNP sites strains. Three PCR-based assays for determining presence of H. pylori infection and two DNA single-point mutation assays aimed at determining whether the infected strains were resistant to quinolone can be performed simultaneously on a single chip, suggesting that this microfluidic system could be a promising tool for rapid diagnosis of the presence of antibiotic-resistant H. pylori strains., (Copyright © 2015 Elsevier B.V. All rights reserved.)

We present a rapid hydrogel polymerization and prototyping microfabrication technique using an optically induced electrokinetics (OEK) chip, which is based on a non-UV hydrogel curing principle. Using this technique, micro-scale high-aspect-ratio three-dimensional polymer features with different geometric sizes can be fabricated within 1⁻10 min by projecting pre-defined visible light image patterns onto the OEK chip. This method eliminates the need for traditional photolithography masks used for patterning and fabricating polymer microstructures and simplifies the fabrication processes. This technique uses cross-link hydrogels, such as poly(ethylene glycol) (PEG)-diacrylate (PEGDA), as fabrication materials. We demonstrated that hydrogel micropillar arrays rapidly fabricated using this technique can be used as molds to create micron-scale cavities in PDMS ( polydimethylsiloxane ) substrates. Furthermore, hollow, circular tubes with controllable wall thicknesses and high-aspect ratios can also be fabricated. These results show the potential of this technique to become a rapid prototyping technology for producing microfluidic devices. In addition, we show that rapid prototyping of three-dimensional suspended polymer structures is possible without any sacrificial etching process.

Accident-induced liver trauma is a significant human health concern, as this organ is readily injured during periods at which the abdominal region is compromised. In this work, electromagnetic thermotherapy was successfully developed and employed in vitro and in vivo to treat livers that had been lacerated. Briefly, a new hemostasis plug was integrated with an electromagnetic thermotherapy system (ETS) to perform surgery on lacerated livers. The high-frequency, alternating electromagnetic field (EMF) was generated by the ETS and was shown to induce a pre-set temperature increase within the hemostasis plug embedded in the target tissue. In order to prevent overheating and maintain a constant hemostasis temperature, a temperature feedback control system was utilized. The effect of the intensity of the EMF on the heating capacity of the ETS-hemostasis system was first explored. Furthermore, the relationship between the coagulation zone and operating temperature were investigated in vitro. By utilizing the temperature feedback control system, the hemostasis plug could be heated to a specific temperature for efficient hemostasis. With this approach, the optimal treatment temperature and time were investigated for liver laceration. Lacerated livers from New Zealand white rabbits were successfully treated with the hemostasis plug and ETS within a short period of time. When compared with the traditional perihepatic packing approach, the volume of blood loss from liver laceration surgeries treated by ETS has been dramatically reduced by 83%, suggesting a high therapeutic potential for this system.

Mesenchymal stem cells (MSCs) have the ability to differentiate into multi-lineage cells, which confers great promise for use in regenerative medicine. In this study, canine adipose MSCs (cAD-MSCs) were isolated from canine adipose tissue. These cells clearly represented stemness (Oct4, Sox2, and Nanog) and differentiation potential into the mesoderm (adipocytes, chondrocytes, and osteoblasts) at early passages. The aim of this study was to evaluate the effects of hypoxia on the differentiation potential into mesoderm, and the expression of anti-apoptotic genes associated with cell survival for the optimal culturing of MSCs. We observed that the proliferation of the cAD-MSCs meaningfully increased when cultured under hypoxic condition than in normoxic condition, during 7 consecutive passages. Also, we found that hypoxia strongly expressed anti-senescence related genes such as HDAC1 (histone deacetylase 1), DNMT1 (DNA (cytosine-5)-methyltransferase 1), Bcl-2 (inhibitor of apoptosis), TERT (telomerase reverse transcriptase), LDHA (lactate dehydrogenase A), SLC2A1 (glucose transporter), and DKC1 (telomere holoenzyme complex) and differentiation potential of cAD-MSCs into chondrocytes, than seen under the normoxic culture conditions. We also examined the multipotency of hypoxic conditioned MSCs using quantitative real-time RT-PCR. We found that the expression levels of stemness genes such as Oct-4, Nanog, and Sox-2 were increased in hypoxic condition when compared to the normoxic condition. Collectively, these results suggest that hypoxic conditions have the ability to induce proliferation of MSCs and augment their chondrogenic potential. This study suggests that cell proliferation of cAD-MSC under hypoxia could be beneficial, when considering these cells for cell therapies of canine bone diseases.

Cell fusion is a critical operation for numerous biomedical applications including cell reprogramming, hybridoma formation, cancer immunotherapy, and tissue regeneration. However, unstable cell contact and random cell pairings have limited efficiency and yields when utilizing traditional methods. Furthermore, it is challenging to selectively perform cell fusion within a group of cells. This study reports a new approach called optically-induced cell fusion (OICF), which integrates cell-pairing microstructures with an optically-induced, localized electrical field. By projecting light patterns onto a photoconductive film (hydrogen-rich, amorphous silicon) coated on an indium-tin-oxide (ITO) glass while an alternating current electrical field was applied between two such ITO glass slides, "virtual" electrodes could be generated that could selectively fuse pairing cells. At 10 kHz, a 57% cell paring rate and an 87% fusion efficiency were successfully achieved at a driving voltage of 20  V(pp), suggesting that this new technology could be promising for selective cell fusion within a group of cells.

Affinity reagents recognizing biomarkers specifically are essential components of clinical diagnostics and target therapeutics. However, conventional methods for screening of these reagents often have drawbacks such as large reagent consumption, the labor-intensive or time-consuming procedures, and the involvement of bulky or expensive equipment. Alternatively, microfluidic platforms could potentially automate the screening process within a shorter period of time and reduce reagent and sample consumption dramatically. It has been demonstrated recently that a subpopulation of tumor cells known as cancer stem cells possess high drug resistance and proliferation potential and are regarded as the main cause of metastasis. Therefore, a peptide that recognizes cancer stem cells and differentiates them from other cancer cells will be extremely useful in early diagnosis and target therapy. This study utilized M13 phage display technology to identify peptides that bind, respectively, to colon cancer cells and colon cancer stem cells using an integrated microfluidic system. In addition to positive selection, a negative selection process was integrated on the chip to achieve the selection of peptides of high affinity and specificity. We successfully screened three peptides specific to colon cancer cells and colon cancer stem cells, namely, HOLC-1, HOLC-2, and COLC-1, respectively, and their specificity was measured by the capture rate between target, control, and other cell lines. The capture rates are 43.40 ± 7.23%, 45.16 ± 7.12%, and 49.79 ± 5.34% for colon cancer cells and colon cancer stem cells, respectively, showing a higher specificity on target cells than on control and other cell lines. The developed technique may be promising for early diagnosis of cancer cells and target therapeutics.

This study reports a robust method of gene transfection in a murine primary cell model by using a high-density electrodes network (HDEN). By demonstrating high cell viability after gene transfection and successful expression of transgenes including fluorescent proteins, the HDEN device shows great promise as a solution in which reprogramming efficiency using non-viral induction for generation of murine induced pluripotent stem cells (iPSCs) is optimized. High and steady transgene expression levels in host cells of iPSCs can be demonstrated using this method. Moreover, the HDEN device achieved successful gene transfection with a low voltage of less than 180 V while requiring relatively low cell numbers (less than 1.5 × 10(4) cells). The results are comparable to current conventional methods, demonstrating a reasonable fluorescent-plasmid transfection rate (42.4% in single transfection and 24.5% in triple transfection) and high cell viability of over 95%. The gene expression levels of each iPSC factor was measured to be over 10-fold higher than that reported in previous studies using a single mouse embryonic fibroblast cell. Our results demonstrate that the generation of iPSCs using HDEN transfection of plasmid DNA may be a feasible and safe alternative to using viral transfection methods in the near future.

We have developed a series of adamantane carboxylic acid derivatives exhibiting potent diacylglycerol acyltransferase 1 (DGAT1) inhibitory activities. Optimization of the series led to the discovery of E-adamantane carboxylic acid compound 43c, which showed excellent in vitro activity with an IC50 value of 5 nM against human and mouse DGAT1, also good druggability as well as microsomal stability and safety profiles such as hERG, CYP and cytotoxicity. Compound 43c significantly reduced plasma triglyceride levels in vivo (in rodents and zebrafish) and also showed bodyweight gain reduction and glucose area under curve (AUC) lowering efficacy in diet-induced obesity (DIO) mice., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)

Over-expression/amplification of human epidermal growth factor receptors 2 (HER2) is a verified therapeutic biomarker for breast and gastric cancers. HER2 is also served as prognostic biomarker for gastric cancer because HER2 over-expression is associated with a 5-10% increase in cancer related death of gastric cancer. Cancer patients exhibiting HER2 over-expression can significantly improve their overall survival rates by taking the targeting drug Herceptin, which directly targets HER2. However, Herceptin has limited functions toward patients without HER2 over-expression and therefore it needs a highly specific and accurate detection method for diagnosis of HER2 over-expression. Currently, fluorescence in situ hybridization (FISH) technique is routinely employed to detect HER2 amplification. However, it is a labor-intensive, time-consuming hybridization process and is relatively costly. Furthermore, well-trained personnel are required to operate the delicate and complicate process. More importantly, it may take 1-2 days for well-trained personnel to perform a whole FISH assay. Given these limitations, we developed a new, integrated microfluidic FISH system capable of automating the entire FISH protocol which could be performed within a shorter period of time when compared to traditional methods. The microfluidic FISH chip consisted of a microfluidic control module for transportation of small amounts of fluids and a hybridization module to perform the hybridization of DNA probes and cells/tissue samples. With this approach, the new microfluidic chip was capable of performing the whole FISH assay within 20h. Four cell lines, two for non-HER2 amplification and two for HER2 amplification, and two clinical tissue samples, one for non-HER2 amplification and another for HER2 amplification, were used for verifications of the developed chip. Experimental data showed that there was no significant difference between the benchtop protocol and the chip-based protocol. Furthermore, the reagent consumption was greatly reduced (∼70% reduction). Especially, only 2-μl usage for FISH deoxyribonucleic acid (DNA) probe was used, which is five-fold reduction when compared with the traditional method. It is the first time that the entire FISH assay could be automated on a single chip by using tissue samples. The microfluidic system developed herein is therefore promising for rapid, automatic diagnosis of HER2-related diseases by detecting the HER2 gene with minimal consumption of samples and reagents and has a great potential for future pharmacogenetic diagnostics and therapy., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Blood glycated hemoglobin (HbA1c), reflecting the average blood glucose level in the proceeding 2-3 months, is recommended for screening/diagnosing and patient management of diabetes. However, accurate measurement of the HbA1c level at the point of care is hampered by costly, large-scale instruments (such as high-performance liquid chromatography) or reagent instability of classical immunologic methods, which involve antibody-based immunoturbidimetry. In this work, an integrated microfluidic system using aptamer-based testing to measure HbA1c in blood samples is therefore presented. This measuring system used nucleic-acid aptamers that exhibited high sensitivity and high specificity for hemoglobin and HbA1c to perform a stable and robust testing. The compact microfluidic system consumed less samples and reagents and significantly shortened the detection time. Combining the advantages of microfluidics and aptamers, this integrated microsystem presents a promising tool for accurate and point-of-case HbA1c detection. To demonstrate its clinical utility, whole blood samples with clinically-relevant concentrations of HbA1c and Hb were automatically measured on the integrated microfluidic system. Experimental data showed that the developed aptamer-based microfluidic system is capable of detecting HbA1c and Hb with a good linear response. The entire process was completed within 25 min. The aptamer-antibody on-chip sandwich immunoassay may be further refined to allow diabetes screening and diagnosis at lower cost and earlier phase to minimize the risk of diabetic complications., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Objective: Carvacrol (2-methyl-5-(1-methylethyl) phenol), a cyclic monoterpene, exerts protective activities in a variety of pathological states including tumor growth, inflammation, and oxidative stress. However, it is unknown whether carvacrol affects events in vascular cells during the development of atherosclerotic neointima. We investigated the effects of carvacrol on the migration and proliferation of rat aortic smooth muscle cells (RASMCs) and on vascular neointima formation., Methods and Results: Carvacrol significantly inhibited platelet-derived growth factor (PDGF)-BB-stimulated RASMC migration and proliferation in a concentration-dependent manner. Cell viability was not affected by treatment with carvacrol. Carvacrol attenuated the expression of NADPH oxidase (NOX) 1 and the phosphorylation of p38 mitogen-activated protein kinase (MAPK) and extracellular signal-regulated kinase 1/2 in response to PDGF-BB. Moreover, carvacrol suppressed the PDGF-BB-stimulated generation of H2O2 and inhibited the activity of NOX in RASMCs. Treatment with carvacrol inhibited PDGF-BB-induced aortic sprout outgrowth, balloon injury-evoked vascular neointima formation, and expression of proliferating cell nuclear antigen in the neointima., Conclusion: These findings indicate that carvacrol inhibits migration and proliferation of RASMCs by suppressing the reactive oxygen species-mediated MAPK signaling pathway in these cells, thereby attenuating vascular neointimal formation. Carvacrol may be a promising agent for preventing vascular restenosis or atherosclerosis., (Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.)

Colorectal cancer (CRC) is the most frequently diagnosed cancer around the world, causing about 700,000 deaths every year. It is clear now that a small fraction of CRC, named colorectal cancer stem cells (CSCs) exhibiting self-renewal and extensive proliferative activities, are hard to be eradicated. Unfortunately, highly specific biomarkers for colorectal CSC (CR-CSCs) are lacking that prohibits the development of effective therapeutic strategies. This study designed and manufactured a novel microfluidic system capable of performing a fully automated cell-based, systematic evolution of ligands by exponential enrichment (SELEX) process. Eight CR-CSC/CRC-specific aptamers were successfully selected using the microfluidic chip. Three of the aptamers showed high affinities towards their respective target cells with a dissociation constant of 27.4, 28.5 and 12.3 nM, which are comparable to that of antibodies.

In this paper, a novel camera tamper detection algorithm is proposed to detect three types of tamper attacks: covered, moved and defocused. The edge disappearance rate is defined in order to measure the amount of edge pixels that disappear in the current frame from the background frame while excluding edges in the foreground. Tamper attacks are detected if the difference between the edge disappearance rate and its temporal average is larger than an adaptive threshold reflecting the environmental conditions of the cameras. The performance of the proposed algorithm is evaluated for short video sequences with three types of tamper attacks and for 24-h video sequences without tamper attacks; the algorithm is shown to achieve acceptable levels of detection and false alarm rates for all types of tamper attacks in real environments.

We present a method capable of rapidly (∼20 s) determining the density and mass of a single leukemic cell using an optically induced electrokinetics (OEK) platform. Our team had reported recently on a technique that combines sedimentation theory, computer vision, and micro particle manipulation techniques on an OEK microfluidic platform to determine the mass and density of micron-scale entities in a fluidic medium; the mass and density of yeast cells were accurately determined in that prior work. In the work reported in this paper, we further refined the technique by performing significantly more experiments to determine a universal correction factor to Stokes' equation in expressing the drag force on a microparticle as it falls towards an infinite plane. Specifically, a theoretical model for micron-sized spheres settling towards an infinite plane in a microfluidic environment is presented, and which was validated experimentally using five different sizes of micro polystyrene beads. The same sedimentation process was applied to two kinds of leukemic cancer cells with similar sizes in an OEK platform, and their density and mass were determined accordingly. Our tests on mouse lymphocytic leukemia cells (L1210) and human leukemic cells (HL-60) have verified the practical viability of this method. Potentially, this new method provides a new way of measuring the volume, density, and mass of a single cell in an accurate, selective, and repeatable manner.

Periprosthetic joint infection (PJI) is one of the most dreading complications that hinder the merits of an arthroplasty. A prerequisite for treatment of the above procedure is rapid detection of live bacteria to prevent its recurrence and proper choice of antibiotics. Conventional culture methods are time-consuming and associated with a high false negative rate. Amplification of bacterial genetic materials requires a tedious process but is associated with a high false positive rate. An integrated microfluidic system capable of molecular diagnosis for detecting live bacteria was reported in our previous work. However, the system could not provide detailed information about infectious bacteria for the subsequent antibiotic choices. Furthermore, it took at least 55min to finish the entire process. In this work, a microfluidic platform using ethidium monoazide (EMA) which can only penetrate into dead bacteria is presented for live bacteria detection and typing within a short period of time (30min for the detection of live bacteria and another 40min for the typing of bacteria strains). We tested the proposed system by using human joint fluid samples and found its limit of detection for bacterial detection equal to 10(2)CFU (colony formation unit) for live bacteria detection with gold nanoparticle probes and 10(2)-10(4)CFU for typing bacteria by an on-chip polymerase chain reaction. The whole procedure of the integrated microfluidic system is automated with little human intervention. Moreover, this is the first time that sequential live bacteria detection and typing are demonstrated on the same microfluidic platform. Based on the promising results, the proposed system may become in the near future an auxiliary tool for immediate medical decision and choice of antibiotics in routine arthroplasties or PJI's., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Ovarian cancer is one of the leading causes of female mortality worldwide. Unfortunately, there are currently few high-specificity candidate oligopeptide targeting agents that can be used for early diagnosis of this cancer. It has been suggested that cancer-specific oligopeptides could be screened from a phage display library. However, conventional methods are tedious, labor-intensive, and time consuming. Therefore, a novel, integrated microfluidic system was developed to automate the entire screening process for ovarian cancer cell-specific oligopeptides. An oligopeptide screened with microfluidic chip-based technique was demonstrated to have high affinity to ovarian cancer cells and demonstrated relatively low binding to other cancer cells, indicating a high specificity. Furthermore, the developed method consumed relatively low volumes of samples and reagents; only 70 μL of reactant was used within the whole experimental process. Each panning process was also significantly shortened to only 7.5 hours. Therefore, the screened oligopeptide could be used to isolate ovarian cancer cells in a rapid manner, thus greatly expediting the diagnosis and its application as oligopeptide targeting agent for theranostics of this cancer.

Blood glycated hemoglobin (HbA1c) levels reflecting average glucose concentrations over the past three months are fundamental for the diagnosis, monitoring, and risk assessment of diabetes. It has been hypothesized that aptamers, which are single-stranded DNAs or RNAs that demonstrate high affinity to a large variety of molecules ranging from small drugs, metabolites, or proteins, could be used for the measurement of HbA1c. Aptamers are selected through an in vitro process called systematic evolution of ligands by exponential enrichment (SELEX), and they can be chemically synthesized with high reproducibility at relatively low costs. This study therefore aimed to select HbA1c- and hemoglobin (Hb)-specific single-stranded DNA aptamers using an on-chip SELEX protocol. A microfluidic SELEX chip was developed to continuously and automatically carry out multiple rounds of SELEX to screen specific aptamers for HbA1c and Hb. HbA1c and Hb were first coated onto magnetic beads. Following several rounds of selection and enrichment with a randomized 40-mer DNA library, specific oligonucleotides were selected. The binding specificity and affinity were assessed by competitive and binding assays. Using the developed microfluidic system, the incubation and partitioning times were greatly decreased, and the entire process was shortened dramatically. Both HbA1c- and Hb-specific aptamers selected by the microfluidic system showed high specificity and affinity (dissociation constant, Kd = 7.6 ± 3.0 nM and 7.3 ± 2.2 nM for HbA1c and Hb, respectively). With further refinements in the assay, these aptamers may replace the conventional antibodies for in vitro diagnostics applications in the near future.

Orchids of the genus Phalaenopsis are some of the most economically important plants in Taiwan. Fast, accurate, and on-site detection of pathogens in these orchids is therefore of critical importance in order to prevent or suppress costly disease outbreaks. Traditional pathogen detection methods are time-consuming, require well-equipped laboratories with highly trained personnel, and cannot be conducted in situ. In this study, a microfluidic system integrated with buried optical fibers was developed to detect viral pathogens of Phalaenopsis spp. Briefly, virus-specific ribonucleic acid (RNA) purification was achieved by a pre-treatment incubation with magnetic beads, and reverse-transcription loop-mediated isothermal amplification (RT-LAMP) was used subsequently to amplify the viral RNA. Positive RT-LAMP reactions resulted in the precipitation of magnesium pyrophosphate, which caused a change in turbidity that could be seen by the naked eye. A buried optical fiber-based detection module and a micro-stirring device were then integrated into the microfluidic chip to detect the RT-LAMP reaction product directly on the chip itself by measuring the change in the optical signals caused by the turbidity change associated with a positive amplification. The limit of detection for this system was found to be 25 fg, which is of similar sensitivity to existing, more laborious methods. Therefore, by using the integrated microfluidic system, a sensitive, rapid, accurate, and automatic diagnosis of viral pathogens in Phalaenopsis spp. orchids could be achieved within only 65 min., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Nervous necrosis virus (NNV) and iridovirus are highly infectious pathogens that can cause lethal diseases in various species of fish. These infectious diseases have no effective treatments and the mortality rate is over 80%, which could cause dramatic economic losses in the aquaculture industry. Conventional diagnostic methods of NNV or iridovirus infected fishes, such as virus culture, enzyme-linked immunosorbent assays and nucleic acid assays usually require time-consuming and complex procedures performed by specialized technicians with delicate laboratory facilities. Rapid, simple, accurate and on-site detection of NNV and iridovirus infections would enable timely preventive measures such as immediate sacrifice of infected fishes, and is therefore critically needed for the aquaculture industry. In this study, a microfluidic-based assay that employ magnetic beads conjugated with viral deoxyribonucleic acid (DNA) capturing probes and fluorescent DNA molecular beacons were developed to rapidly detect NNV and iridovirus. Importantly, this new assay was realized in an integrated microfluidic system with a custom-made control system. With this approach, direct and automated NNV and iridovirus detection from infected fishes can be achieved in less than 30 min. Therefore, this molecular-beacon based microfluidic system presents a potentially promising tool for rapid diagnosis of fish pathogens in the field in the future., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The density of a single cell is a fundamental property of cells. Cells in the same cycle phase have similar volume, but the differences in their mass and density could elucidate each cell's physiological state. Here we report a novel technique to rapidly measure the density and mass of a single cell using an optically induced electrokinetics (OEK) microfluidic platform. Presently, single cellular mass and density measurement devices require a complicated fabrication process and their output is not scalable, i.e., it is extremely difficult to measure the mass and density of a large quantity of cells rapidly. The technique reported here operates on a principle combining sedimentation theory, computer vision, and microparticle manipulation techniques in an OEK microfluidic platform. We will show in this paper that this technique enables the measurement of single-cell volume, density, and mass rapidly and accurately in a repeatable manner. The technique is also scalable - it allows simultaneous measurement of volume, density, and mass of multiple cells. Essentially, a simple time-controlled projected light pattern is used to illuminate the selected area on the OEK microfluidic chip that contains cells to lift the cells to a particular height above the chip's surface. Then, the cells are allowed to "free fall" to the chip's surface, with competing buoyancy, gravitational, and fluidic drag forces acting on the cells. By using a computer vision algorithm to accurately track the motion of the cells and then relate the cells' motion trajectory to sedimentation theory, the volume, mass, and density of each cell can be rapidly determined. A theoretical model of micro-sized spheres settling towards an infinite plane in a microfluidic environment is first derived and validated experimentally using standard micropolystyrene beads to demonstrate the viability and accuracy of this new technique. Next, we show that the yeast cell volume, mass, and density could be rapidly determined using this technology, with results comparable to those using the existing method suspended microchannel resonator.

Thermal ablation by using electromagnetic thermotherapy (EMT) has been a promising cancer modality in recent years. It has relatively few side effects and has therefore been extensively investigated for a variety of medical applications in internal medicine and surgery. The EMT system applies a high-frequency alternating electromagnetic field to heat up the needles which are inserted into the target tumor to cause tumor ablation. In this study, a new synchronized-coil EMT system was demonstrated, which was equipped with two synchronized coils and magnetic field generators to provide a long-range, penetrated electromagnetic field to effectively heat up the needles. The heating effect of the needles at the center of the two coils was first explored. The newly designed two-section needle array combined with the synchronized-coil EMT system was thus demonstrated in the in vitro and in vivo animal experiments. Experimental data showed that the developed system is promising for minimally invasive surgery since it might provide superior performance for thermotherapy in cancer treatment.

Ovarian cancer (OvCa) is the second most common type of gynecological cancer. More seriously, the prognosis for survival is relatively poor if an early OvCa diagnosis is not achieved. However, it is extremely challenging to diagnose very early stage OvCa, when treatments are the most effective, because of the lack of specific and sensitive biomarkers. Therefore, in order to achieve early detection of OvCa, screening and identifying biomarkers with high specificity and affinity are greatly needed. In this study, an integrated microfluidic system capable of performing cell-based systematic evolution of ligands by an exponential enrichment (Cell-SELEX) process was developed for automatic, high-throughput screening of multiple cell lines to competitively select aptamer-based biomarkers for OvCa. This on-chip Cell-SELEX process only required five rounds of aptamer selection, which is much faster than using a conventional SELEX process (22 rounds). Using this on-chip process, 13 aptamers specific to OvCa cells were successfully screened and three of them showed high affinity towards target cells with dissociation constants of 1.8 nM, 8.3 nM, and 1.3 nM. Analysis of stained fluorescence images and competitive testing against multiple cancer cell lines (cervical cancer, breast cancer, lung cancer, and liver cancer) were performed to verify the specificity of these selected aptamers. The results demonstrated that this developed system could perform the on-chip Cell-SELEX selection successfully and could be applied for personalized aptamer screening or targeted therapy monitoring in the near future.

The random copolymerization between two different diketopyrrolopyrole-based conducting units represents a suitable synthetic strategy to increase the solubility of polymer semiconductors in a non-chlorinated solvent, without compromising the high charge-carrier mobility. Highly performing thin-film transistors processed from environmentally benign solvents such as tetralin are demonstrated for the first time, resulting in a mobility of greater than 5 cm(2) V(-1) s(-1)., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Arthroplasty is a general approach for improving the life quality for patients with degenerative or injured joints. However, post-surgery complications including periprosthetic joint infection (PJI) poses a serious drawback to the procedure. Several methods are available for diagnosing PJI, but they are time-consuming or have poor sensitivity and specificity. Alternatively, reverse-transcription PCR can detect live bacteria and reduce false-positive results but cannot avoid the cumbersome RNA handling and human contamination issues. In response, an integrated microfluidic system capable of detecting live bacteria from clinical PJI samples within 55 minutes is developed in this study. This system employs an ethidium monoazide (EMA)-based assay and a PCR with universal bacterial primers and probes to isolate and detect only the live bacteria that commonly cause PJI. The experimental results indicated that the developed system can detect bacteria in human joint fluids with a detection limit of 10(4) colony formation unit mL(-1). Furthermore, nine clinical samples were analyzed using the microfluidic system. The results obtained from the microfluidic system were negative for all culture-negative cases, indicating that the proposed system can indeed reduce false-positive results. In addition, experimental results showed that the EMA sample pre-treatment process was crucial for successful detection of live bacteria. The culture-positive cases were diagnosed as positive by the proposed system only when the clinical samples were treated with EMA immediately after being sampled from patients. Based on these promising results, the developed microfluidic system can be a useful tool to detect PJI and potentially be applied in other clinical situations.

A high sensitive sensor is demonstrated by exploiting strong transverse magneto-optical Kerr effect on a ferromagnetic surface plasmon grating. The surface plasmon grating, made of a hybridized Au/Fe/Au layer, exhibits a very dispersive Kerr parameter variation near the surface plasmon polariton (SPP) wavelength via coherent scattering of the SPP on the grating structure. Interrogating this Kerr parameter can be utilized for detecting chemical or biological objects in a fluid medium. The experiment results show the minimal detectable mass concentration of sodium chloride in a saline solution is 4.27 × 10(-3) %, corresponding to a refractive index change of 7.60 × 10(-6) RIU. For an avidin-biotin interaction experiment, the sensitivity of avidin detection in PBS solution is 1.97 nM, which is limited by the index fluctuation of flowing media during measurement.

We demonstrated the integration of a microfluidic device with an optically induced dielectrophoresis (ODEP) device such that the critical medium replacement process was performed automatically and the cells could be subsequently manipulated by using digitally projected optical images. ODEP has been demonstrated to generate sufficient forces for manipulating particles/cells by projecting a light pattern onto photoconductive materials which creates virtual electrodes. The production of the ODEP force usually requires a medium that has a suitable electrical conductivity and an appropriate dielectric constant. Therefore, a 0.2 M sucrose solution is commonly used. However, this requires a complicated medium replacement process before one is able to manipulate cells. Furthermore, the 0.2 M sucrose solution is not suitable for the long-term viability of cells. In comparison to conventional manual processes, our automated medium replacement process only took 25 minutes. Experimental data showed that there was up to a 96.2% recovery rate for the manipulated cells. More importantly, the survival rate of the cells was greatly enhanced due to this faster automated process. This newly developed microfluidic chip provided a promising platform for the rapid replacement of the cell medium and this was also the first time that an ODEP device was integrated with other active flow control components in a microfluidic device. By improving cell viability after cell manipulation, this design may contribute to the practical integration of ODEP modules into other lab-on-a-chip devices and biomedical applications in the future.

The influenza A virus is a notorious pathogen that causes high morbidity, high mortality, and even severe global pandemics. Early and rapid diagnosis of the virus is therefore crucial in preventing and controlling any influenza outbreaks. Recently, novel nucleic acid-based affinity reagents called aptamers have emerged as promising candidates for diagnostic assays as they offer several advantages over antibodies, including in vitro selection, chemical synthesis, thermal stability and relatively low costs. Aptamers with high sensitivity and specificity are generated via Systematic Evolution of Ligands by Exponential Enrichment (SELEX), a process that is currently time-consuming, as well as labor- and resource-intensive. In this study, an integrated microfluidic system was developed and was successfully applied to screen a specific aptamer for the influenza A/H1N1 (InfA/H1N1) virus in an automated and highly efficient manner. The selected aptamer was implemented in a magnetic-bead assay, which demonstrated specific and sensitive detection of the InfA/H1N1 virus, even in biological samples such as throat swabs. Consequently, this specific aptamer presents a promising affinity reagent for clinical diagnosis of InfA/H1N1. This is the first demonstration of screening influenza virus-specific aptamers using the microfluidic SELEX technology, which may be expanded for the rapid screening of aptamers against other pathogens for future biomedical applications.

A PCR-free assay for rapid pathogen diagnosis was implemented on an integrated microfluidic system in this study. Vancomycin-conjugated magnetic beads were used to capture multiple strains of bacteria and nucleotide probes labeled gold nanoparticles were used to specify and detect a specific strain by hybridization-induced color change. The assay was entirely automated within an integrated microfluidic device that was composed of suction-type micropumps, microvalves, microchannels, and microchambers that fabricated by microfluidic technology. Multiple strains of bacteria could be captured simultaneously by vancomycin-conjugated magnetic beads, with capturing efficiency exceeding 80%. Subsequently, sensitive and strain-specific detection against target bacteria could be achieved by using nanogold labeled specific nucleotide probes. The limit of detection of 10(2)CFU bacteria was achieved. Importantly, nucleic acid amplification was not involved in the diagnostic procedures; the entire analytic process required only 25min. The developed platform may provide a promising tool for rapid diagnosis of bacterial infections., From the Clinical Editor: In this novel study, a PCR-free pathogen detection method is demonstrated. After vancomycin-conjugated magnetic beads captured bacteria, nucleotide probes-labeled gold nanoparticles were employed to specify and detect specific strains via hybridization-induced color change. Multiple strains of bacteria could be captured simultaneously with an efficiency exceeding 80%, enabling the detection of as low as 10(2) CFU of bacteria., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Magnetic manganese ferrite (MnFe2O4) nanoparticles with approximately 100nm in diameter were used to improve the performance of an immunoassay for detecting influenza infections. The synthesized nanoparticles were tested for long-term storage to confirm the stability of their thermal decomposition process. Then, an integrated microfluidic system was developed to perform the diagnosis process automatically, including virus purification and detection. To apply these nanoparticles for influenza diagnosis, a micromixer was optimized to reduce the dead volume within the microfluidic chip. Furthermore, the mixing index of the micromixer could achieve as high as 97% in 2seconds. The optical signals showed that this nanoparticle-based immunoassay with dynamic mixing could successfully achieve a detection limit of influenza as low as 0.007 HAU. When compared with the 4.5-μm magnetic beads, the optical signals of the MnFe2O4 nanoparticles were twice as sensitive. Furthermore, five clinical specimens were tested to verify the usability of the developed system., From the Clinical Editor: In this study, magnetic manganese ferrite nanoparticles were used to improve the performance of a novel immunoassay for the rapid and efficient detection of influenza infections., (Copyright © 2014 Elsevier Inc. All rights reserved.)

The culturing of cancer cells on micropatterned substrates can provide insight into the factors of the extracellular environment that enable the control of cell growth. We report here a novel non-UV-based technique to quickly micropattern a poly-(ethylene) glycol diacrylate (PEGDA)-based hydrogel on top of modified glass substrates, which were then used to control the growth patterns of breast cancer cells. Previously, the fabrication of micropatterned substrates required relatively complicated steps, which made it impractical for researchers to rapidly and systematically investigate the effects of different cell growth patterns. The technique presented herein operates on the principle of optically-induced electrokinetics (OEKs) and uses computer-generated projection light patterns to dynamically pattern the hydrogel on a hydrogenated amorphous silicon (a-Si:H) thin-film, atop an indium tin oxide (ITO) glass substrate. This technique allows us to pattern lines, circles, pentagons, and more complex shapes in the hydrogel with line widths below 3 μm and thicknesses of up to 6 μm within 8 s by simply controlling the projected illumination pattern and applying an appropriate AC voltage between the two ITO glass substrates. After separating the glass substrates to expose the patterned hydrogel, we experimentally demonstrate that MCF-7 breast cancer cells will adhere to the bare a-Si:H surface, but not to the hydrogel patterned in various geometric shapes and sizes. Theoretical analysis and finite-element model simulations reveal that the dominant OEK forces in our technique are the dielectrophoresis (DEP) force and the electro-osmosis force, which enhance the photo-initiated cross-linking reaction in the hydrogel. Our preliminary cultures of breast cancer cells demonstrate that this reported technique could be applied to effectively confine the growth of cancer cells on a-Si:H surfaces and affect individual cell geometry during their growth.

Early stage detection of lymphoma cells is invaluable for providing reliable prognosis to patients. However, the purity of lymphoma cells in extracted samples from human patients' marrow is typically low. To address this issue, we report here our work on using optically-induced dielectrophoresis (ODEP) force to rapidly purify Raji cells' (a type of Burkitt's lymphoma cell) sample from red blood cells (RBCs) with a label-free process. This method utilizes dynamically moving virtual electrodes to induce negative ODEP force of varying magnitudes on the Raji cells and RBCs in an optically-induced electrokinetics (OEK) chip. Polarization models for the two types of cells that reflect their discriminate electrical properties were established. Then, the cells' differential velocities caused by a specific ODEP force field were obtained by a finite element simulation model, thereby established the theoretical basis that the two types of cells could be separated using an ODEP force field. To ensure that the ODEP force dominated the separation process, a comparison of the ODEP force with other significant electrokinetics forces was conducted using numerical results. Furthermore, the performance of the ODEP-based approach for separating Raji cells from RBCs was experimentally investigated. The results showed that these two types of cells, with different concentration ratios, could be separated rapidly using externally-applied electrical field at a driven frequency of 50 kHz at 20 Vpp. In addition, we have found that in order to facilitate ODEP-based cell separation, Raji cells' adhesion to the OEK chip's substrate should be minimized. This paper also presents our experimental results of finding the appropriate bovine serum albumin concentration in an isotonic solution to reduce cell adhesion, while maintaining suitable medium conductivity for electrokinetics-based cell separation. In short, we have demonstrated that OEK technology could be a promising tool for efficient and effective purification of Raji cells from RBCs.