Search

Many motile bacteria display wiggling trajectories, which correspond to helical swimming paths. Wiggling trajectories result from flagella pushing off-axis relative to the cell body and making the cell wobble. The spatial extent of wiggling trajectories is controlled by the swimming velocity and flagellar torque, which leads to rotation of the cell body. We employ the method of regularized stokeslets to investigate the wiggling trajectories produced by flagellar bundles, which can form at many locations and orientations relative to the cell body for peritrichously flagellated bacteria. Modelling the bundle as a rigid helix with fixed position and orientation relative to the cell body, we show that the wiggling trajectory depends on the position and orientation of the flagellar bundle relative to the cell body. We observe and quantify the helical wiggling trajectories of Bacillus subtilis, which show a wide range of trajectory pitches and radii, many with pitch larger than 4 $\lrm{\ensuremath{\mu}} \mathrm{m} $. For this bacterium, we show that flagellar bundles with fixed orientation relative to the cell body are unlikely to produce wiggling trajectories with pitch larger than 4 $\lrm{\ensuremath{\mu}} \mathrm{m} $. An estimate based on torque balance shows that this constraint on pitch is a result of the large torque exerted by the flagellar bundle. On the other hand, multiple rigid bundles with fixed orientation, similar to those recently observed experimentally, are able to produce wiggling trajectories with large pitches. [ABSTRACT FROM PUBLISHER]

The motility of organisms is often directed in response to environmental stimuli. Rheotaxis is the directed movement resulting from fluid velocity gradients, long studied in fish, aquatic invertebrates, and spermatozoa. Using carefully controlled microfluidic flows, we show that rheotaxis also occurs in bacteria. Excellent quantitative agreement between experiments with Bacillus subtilis and a mathematical model reveals that bacterial rheotaxis is a purely physical phenomenon, in contrast to fish rheotaxis but in the same way as sperm rheotaxis. This previously unrecognized bacterial taxis results from a subtle interplay between velocity gradients and the helical shape of flagella, which together generate a torque that alters a bacterium's swimming direction. Because this torque is independent of the presence of a nearby surface, bacterial rheotaxis is not limited to the immediate neighborhood of liquid-solid interfaces, but also takes place in the bulk fluid. We predict that rheotaxis occurs in a wide range of bacterial habitats, from the natural environment to the human body, and can interfere with chemotaxis, suggesting that the fitness benefit conferred by bacterial motility may be sharply reduced in some hydrodynamic conditions. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Physics is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Helicobacter pylori swims through mucus gel by generating ammonia that locally neutralizes the acidic gastric environment, turning nearby gel into a fluid pocket. The size of the fluid zone is important for determining the physics of the motility: in a large zone swimming occurs as in a fluid through hydrodynamic principles, while in a very small zone the motility could be strongly influenced by nonhydrodynamic cell-mucus interactions including chemistry and adhesion. Here, we calculate the size of the fluid pocket. We model how swimming depends on the de-gelation range using a Taylor sheet swimming through a layer of Newtonian fluid bounded by a Brinkman fluid. Then, we model how the de-gelation range depends on the swimming speed by considering the advection-diffusion of ammonia exuded from a translating sphere. Self-consistency between both models determines the values of the swimming speed and the de-gelation range. We find that H. pylori swims through mucus as if unconfined, in a large pocket of Newtonian fluid. [ABSTRACT FROM AUTHOR]

The influence of a plane boundary on low-Reynolds-number swimmers has frequently been studied using image systems for flow singularities. However, the boundary effect can also be expressed using a boundary integral representation over the traction on the boundary. We show that examining the traction pattern on the boundary caused by a swimmer can yield physical insights into determining when far-field multipole models are accurate. We investigate the swimming velocities and the traction of a three-sphere swimmer initially placed parallel to an infinite planar wall. In the far field, the instantaneous effect of the wall on the swimmer is well approximated by that of a multipole expansion consisting of a force dipole and a force quadrupole. On the other hand, the swimmer close to the wall must be described by a system of singularities reflecting its internal structure. We show that these limits and the transition between them can be independently identified by examining the traction pattern on the wall, either using a quantitative correlation coefficient or by visual inspection. Last, we find that for nonconstant propulsion, correlations between swimming stroke motions and internal positions are important and not captured by time-averaged traction on the wall, indicating that care must be taken when applying multipole expansions to study boundary effects in cases of nonconstant propulsion. [ABSTRACT FROM AUTHOR]

A substantial proportion of Hong Kong's aging population suffers from osteoarthritis in both knees. Bilateral total knee arthroplasty (BTKA) is a surgical option for addressing this condition and can be performed via two approaches: simultaneous BTKA (SimBTKA) and staged BTKA (StaBTKA). We compared the cost-effectiveness and safety of these two methods in our institution. We retrospectively reviewed 2,372 patients (SimBTKA, 772; StaBTKA, 1,600; females, 1,780; males, 592; mean age at SimBTKA, 70.4 ± 7.99 years; mean age at StaBTKA, 66.4 ± 7.50 years; p  < 0.001) who underwent BTKA in our institution from 2001 to 2022. Patients were categorized according to the surgical approach. Patients undergoing BTKA in our institution were included. Particularly for SimBTKA, patients were assessed by anesthetists to be medically fit before undergoing the procedure according to their age, American Society of Anesthesiologists status, and osteoarthritis severity. The primary outcome was the length of stay (LOS) after surgery. The secondary outcomes were the 30-day unintended readmission, intensive care unit (ICU) admission, and death. SimBTKA had a shorter mean total LOS (acute hospital + rehabilitation center; SimBTKA, 13.09 days; StaBTKA, 18.12 days; p  < 0.001) and mean LOS in acute hospital (SimBTKA, 7.70 days; StaBTKA, 10.42 days; p  < 0.001). However, no significant difference was found in the mean LOS in rehabilitation centers (SimBTKA, 5.47 days; StaBTKA, 6.32 days; p  > 0.05) between the two approaches. The 30-day unintended readmission rate was lower in SimBTKA (SimBTKA, 2.07%; StaBTKA, 3.30%; odds ratio [OR] = 1.60; p  > 0.05) but statistically insignificant. SimBTKA was less costly than StaBTKA by US$ 8,422.22 per patient. No significant differences in ICU admission and death rates were found ( p  > 0.05) between the two groups. SimBTKA had a shorter LOS and lower cost than StaBTKA and comparable complication rates. Therefore, SimBTKA should be indicated in medically stable patients., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: The second-generation metaphyseal cone was useful in managing bone defects in revision knee arthroplasty. However, due to the anatomical constraints in Asian osteometry, the authors utilized a novel free-hand burring technique instead of cannulated reaming for bone preparation. We reported the short-term outcomes of our surgical techniques specific to Asian osteometry., Methods: We conducted a case series by consecutively recruiting 13 female and 12 male patients (involving 25 knees), with a mean age of 71 years (range, 54-88 years). The patients underwent revision total knee arthroplasty during the period from April 2017 to June 2022. Twenty-three tibial cones and 4 femoral cones using free-hand burring technique were implanted. The mean follow-up duration was 51 months (range 18-80 months). Due to the relatively small bone size and meta-diaphyseal center mismatch in the Asian knees, the free-hand burring technique instead of the cannulated reaming technique was adopted in preparing for cone implantation. The clinical outcomes were knee ranges of motion, the Knee Society Knee scores (KSS), end-of-stem pain, infection, and the need for revision surgery. The radiological outcomes included osteointegration, fracture, and loosening., Results: Mean knee range of motion improved from 83 degrees (range 0°-120°) preoperatively to 106 degrees (range 60°-125°) postoperatively (P < 0.001). Mean KSS improved significantly from 29 (range 0-70) to 69 (range 5-100) (P < 0.001). All cones were osteointegrated. One case had transient end-of-stem pain, two developed intraoperative minor femoral fractures and one suffered from recurrent infection that did not require cone revision. Cone revision-free survivorship was 100%. There was no aseptic loosening., Conclusions: The second-generation cone implanted with free-hand burring bone preparation yielded promising short-term outcomes in Asian knees., (© 2024. The Author(s).)

Anticipating implant sizes before total knee arthroplasty (TKA) allows the surgical team to streamline operations and prepare for potential difficulties. This study aims to determine the correlation and derive a regression model for predicting TKA sizes using patient-specific demographics without using radiographs. We reviewed the demographics, including hand and foot sizes, of 1,339 primary TKAs. To allow for comparison across different TKA designs, we converted the femur and tibia sizes into their anteroposterior (AP) and mediolateral (ML) dimensions. Stepwise multivariate regressions were performed to analyze the data. Regarding the femur component, the patient's foot, gender, height, hand circumference, body mass index, and age was the significant demographic factors in the regression analysis (R-square 0.541, p  < 0.05). For the tibia component, the significant factors in the regression analysis were the patient's foot size, gender, height, hand circumference, and age (R-square 0.608, p  < 0.05). The patient's foot size had the highest correlation coefficient for both femur (0.670) and tibia (0.697) implant sizes ( p  < 0.05). We accurately predicted the femur component size exactly, within one and two sizes in 49.5, 94.2, and 99.9% of cases, respectively. Regarding the tibia, the prediction was exact, within one and two sizes in 53.0, 96.0, and 100% of cases, respectively. The regression model, utilizing patient-specific characteristics, such as foot size and hand circumference, accurately predicted TKA femur and tibia sizes within one component size. This provides a more efficient alternative for preoperative planning., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: Survivorship of medial unicompartmental knee arthroplasty (UKA) is technique-dependent. Correct femoral-tibial component positioning associates with improved survivorship. Image-free robotic-assisted unicompartmental knee arthroplasty enables preoperative and intraoperative planning of alignment and assessment of positioning prior to execution. This study aimed to compare the radiological outcomes between robotic-assisted UKA (R-UKA) and conventional UKA (C-UKA)., Methods: This retrospective case control study involved 140 UKA (82 C-UKA and 58 R-UKA) performed at an academic institution between March 2016 to November 2020, with a mean follow-up of 3 years. Postoperative radiographs were evaluated for mechanical axis and femoral-tibial component position. Component position was measured by two methods: (1) femoral-tibial component contact point with reference to four medial-to-lateral quadrants of the tibial tray and (2) femoral-tibial component contact point deviation from the center of the tibial tray as a percentage of the tibial tray width. Baseline demographics and complications were recorded., Results: There was a higher mean component deviation in C-UKA compared with R-UKA using method 2 (17.2% vs. 12.8%; P = 0.007), but no difference in proportion of zonal outliers using method 1 (4 outliers in C-UKA, 5.1% vs. 1 outlier in R-UKA, 1.8%; P = 0.403). R-UKA showed no difference in mean mechanical alignment (C-UKA 5° vs. R-UKA 5°; P = 0.250). 2-year survivorship was 99% for C-UKA and 97% for R-UKA. Mean operative time was 18 min longer for R-UKA (P < 0.001)., Conclusion: Image-free robotic-assisted UKA had improved component medio-lateral alignment compared with conventional technique., (© 2024. The Author(s).)

Background: The high co-prevalence of obesity and end-stage osteoarthritis requiring arthroplasty, with the former being a risk factor for complications during arthroplasty, has led to increasing interest in employing preoperative weight loss interventions such as bariatric surgery and diet modification. However, the current evidence is conflicting, and this study aimed to investigate the effect of weight loss intervention before arthroplasty in prospective randomized controlled trials., Methods: Four electronic databases (MEDLINE, EMBASE, Web of Science, and Cochrane Central Register of Controlled Trials) were searched for prospective randomized controlled trials that compared weight loss interventions with usual care from inception to October 2023 by following the PRISMA guidelines. The Cochrane risk of bias tool and GRADE framework were used to assess the quality of the studies. Meta-analyses were performed when sufficient data were available from 2 or more studies., Results: Three randomized controlled trials involving 198 patients were identified. Two studies employed diet modification, and one study utilized bariatric surgery. All three studies reported significant reductions in body weight and body mass index (BMI), and intervention groups had fewer postoperative complications. There was no difference in the length of stay between the intervention group and the control group. Variable patient-reported outcome measures were used by different research groups., Conclusion: Weight loss intervention can achieve significant reductions in body weight and body mass index before arthroplasty, with fewer postoperative complications reported. Further studies with different populations could confirm the effect of these interventions among populations with different obesity characteristics., (© 2024. The Author(s).)

Aims: Isolated acetabular liner exchange with a highly crosslinked polyethylene (HXLPE) component is an option to address polyethylene wear and osteolysis following total hip arthroplasty (THA) in the presence of a well-fixed acetabular shell. The liner can be fixed either with the original locking mechanism or by being cemented within the acetabular component. Whether the method used for fixation of the HXLPE liner has any bearing on the long-term outcomes is still unclear., Methods: Data were retrieved for all patients who underwent isolated acetabular component liner exchange surgery with a HXLPE component in our institute between August 2000 and January 2015. Patients were classified according to the fixation method used (original locking mechanism (n = 36) or cemented (n = 50)). Survival and revision rates were compared. A total of 86 revisions were performed and the mean duration of follow-up was 13 years., Results: A total of 20 patients (23.3%) had complications, with dislocation alone being the most common (8.1%; 7/86). Ten patients (11.6%) required re-revision surgery. Cementing the HXLPE liner (8.0%; 4/50) had a higher incidence of re-revision due to acetabular component liner-related complications than using the original locking mechanism (0%; 0/36; p = 0.082). Fixation using the original locking mechanism was associated with re-revision due to acetabular component loosening (8.3%; 3/36), compared to cementing (0%; 0/50; p = 0.038). Overall estimated mean survival was 19.2 years. There was no significant difference in the re-revision rate between the original locking mechanism (11.1%; 4/36) and cementing (12.0%; 6/50; p = 0.899). Using Kaplan-Meier survival analysis, the revision-free survival of HXLPE fixed with the original locking mechanism and cementing was 94.1% and 93.2%, respectively, at ten years, and 84.7% and 81.3%, respectively, at 20 years (p = 0.840)., Conclusion: The re-revision rate and the revision-free survival following acetabular component liner exchange revision surgery using the HXLPE liner were not influenced by the fixation technique used. Both techniques were associated with good survival at a mean follow-up of 13 years. Careful patient selection is necessary for isolated acetabular component liner exchange revision surgery in order to achieve the best outcomes., Competing Interests: H. Fu reports consulting fees and payment or honoraria for lectures, presentations, speakers bureaus, manuscript writing or educational events from Stryker, unrelated to this article., (© 2024 Liu et al.)

Background: Joint space width (JSW) is a traditional imaging marker for knee osteoarthritis (OA) severity, but it lacks sensitivity in advanced cases. We propose tibial subchondral bone area (TSBA), a new CT imaging marker to explore its relationship with OA radiographic severity, and to test its performance for classifying surgical decisions between unicompartmental knee arthroplasty (UKA) and total knee arthroplasty (TKA) compared to JSW., Methods: We collected clinical, radiograph, and CT data from 182 patients who underwent primary knee arthroplasty (73 UKA, 109 TKA). The radiographic severity was scored using Kellgren-Lawrence (KL) grading system. TSBA and JSW were extracted from 3D CT-reconstruction model. We used independent t -test to investigate the relationship between TSBA and KL grade, and binary logistic regression to identify factors associated with TKA risk. The accuracy of TSBA, JSW and established classification model in differentiating between UKA and TKA was assessed using AUC., Results: All parameters exhibited inter- and intra-class coefficients greater than 0.966. Patients with KL grade 4 had significantly larger TSBA than those with KL grade 3. TSBA (0.708 of AUC) was superior to minimal/average JSW (0.547/0.554 of AUC) associated with the risk of receiving TKA. Medial TSBA, together with gender and Knee Society Knee Score, emerged as independent classification factors in multivariate analysis. The overall AUC of composite model for surgical decision-making was 0.822., Conclusion: Tibial subchondral bone area is an independent imaging marker for radiographic severity, and is superior to JSW for surgical decision-making between UKA and TKA in advanced OA patients., Competing Interests: The authors have no conflicts of interest relevant to this article., (© 2024 The Author(s).)

The feeding performance of zooplankton influences their evolution and can explain their behaviour. A commonly used metric for feeding performance is the volume of fluid that flows through a filtering surface and is scanned for food. Here, we show that such a metric may give incorrect results for organisms that produce recirculatory flows, so that fluid flowing through the filter may have been already filtered of food. In a numerical model, we construct a feeding metric that correctly accounts for recirculation in a sessile model organism inspired by our experimental observations of Vorticella and its flow field. Our metric tracks the history of current-borne particles to determine if they have already been filtered by the filtering surface. Examining the pathlines of food particles reveals that the capture of fresh particles preferentially involves the tips of cilia, which we corroborate in observations of feeding Vorticella . We compare the amount of fresh nutrient particles carried to the organism with other metrics of feeding, and show that metrics that do not take into account the history of particles cannot correctly compute the volume of freshly scanned fluid.

Aims: The aim of this study was to evaluate the survival of a collarless, straight, hydroxyapatite-coated femoral stem in total hip arthroplasty (THA) at a minimum follow-up of 20 years., Methods: We reviewed the results of 165 THAs using the Omnifit HA system in 138 patients, performed between August 1993 and December 1999. The mean age of the patients at the time of surgery was 46 years (20 to 77). Avascular necrosis was the most common indication for THA, followed by ankylosing spondylitis and primary osteoarthritis. The mean follow-up was 22 years (20 to 31). At 20 and 25 years, 113 THAs in 91 patients and 63 THAs in 55 patients were available for review, respectively, while others died or were lost to follow-up. Kaplan-Meier analysis was performed to evaluate the survival of the stem. Radiographs were reviewed regularly, and the stability of the stem was evaluated using the Engh classification., Results: A total of seven stems (4.2%) were revised during the study period: one for aseptic loosening, three for periprosthetic fracture, two for infection, and one for recurrent dislocation. At 20 years, survival with revision of the stem for any indication and for aseptic loosening as the endpoint was 96.0% (95% confidence interval (CI) 92.6 to 99.5) and 98.4% (95% CI 96.2 to 100), respectively. At 25 years, the corresponding rates of survival were 94.5% (95% CI 89.9 to 99.3) and 98.1% (95% CI 95.7 to 99.6), respectively. There was radiological evidence of stable bony fixation in 86 stems (76.1%) and evidence of loosening in four (3.5%) at 20 years. All patients with radiological evidence of loosening were asymptomatic., Conclusion: The Omnifit HA femoral stem offered promising long-term survival into the third decade., Competing Interests: H. Fu reports consulting fees and payment or honoraria for lectures, presentations, speakers bureaus, manuscript writing or educational events from Stryker, unrelated to this study. H. Fu is also an International Member of AAHKS and AAOS., (© 2024 Yee et al.)

Aims: The surgical helmet system (SHS) was developed to reduce the risk of periprosthetic joint infection (PJI), but the evidence is contradictory, with some studies suggesting an increased risk of PJI due to potential leakage through the glove-gown interface (GGI) caused by its positive pressure. We assumed that SHS and glove exchange had an impact on the leakage via GGI., Methods: There were 404 arthroplasty simulations with fluorescent gel, in which SHS was used (H+) or not (H-), and GGI was sealed (S+) or not (S-), divided into four groups: H+S+, H+S-, H-S+, and H-S-, varying by exposure duration (15 to 60 minutes) and frequency of glove exchanges (0 to 6 times). The intensity of fluorescent leakage through GGI was quantified automatically with an image analysis software. The effect of the above factors on fluorescent leakage via GGI were compared and analyzed., Results: The leakage intensity increased with exposure duration and frequency of glove exchanges in all groups. When SHS was used and GGI was not sealed (H+S-), the leakage intensity via GGI had the fastest increase, consistently higher than other groups (H+S+, H-S+ and H-S-) after 30 minutes (p < 0.05) and when there were more than four instances of glove exchange (p < 0.05). Additionally, the leakage was strongly correlated with the duration of exposure (r s = 0.8379; p < 0.050) and the frequency of glove exchange (r s = 0.8198; p < 0.050) in H+S-. The correlations with duration and frequency turned weak when SHS was not used (H-) or GGI was sealed off (S+)., Conclusion: Due to personal protection, SHS is recommended in arthroplasties. Meanwhile, it is strongly recommended to seal the GGI of the inner gloves and exchange the outer gloves hourly to reduce the risk of contamination from SHS., Competing Interests: None declared., (© 2023 Chan et al.)

Introduction: Unicompartmental knee arthroplasty (UKA) is an effective surgical treatment for medial compartment arthritis of the knee, yet surgical outcomes are directly related to surgical execution. Robotic arm-assisted surgery aims to address these difficulties by allowing for detailed preoperative planning, real-time intraoperative assessment and haptic-controlled bone removal. This study aimed to compare the clinical and radiological outcomes between conventional manual mobile bearing and robot arm-assisted fixed bearing medial UKA in our local population., Materials and Methods: This is a retrospective case-control study of 148 UKAs performed at an academic institution with a minimum of 1-year follow-up. 74 robotic arm-assisted UKAs were matched to 74 conventional UKAs via propensity score matching. Radiological outcomes included postoperative mechanical axis and individual component alignment. Clinical parameters included a range of motion, Knee Society knee score and functional assessment taken before, 6 and 12 months after the operation., Results: Robot arm-assisted UKA produced a more neutral component coronal alignment in both femoral component (robotic -0.2 ± 2.8, manual 2.6 ± 2.3; P = 0.043) and tibial component (robotic -0.3 ± 4.0, manual 1.7 ± 5.3; P < 0.001). While the postoperative mechanical axis was comparable, robot arm-assisted UKA demonstrated a smaller posterior tibial slope (robotic 5.7 ± 2.7, manual 8.2 ± 3.3; P = 0.02). Clinical outcomes did not show any statistically significant differences., Conclusion: Compared with conventional UKA, robotic arm-assisted UKA demonstrated improved component alignment and comparable clinical outcomes. Improved radiological accuracy with robotic-arm assistance demonstrated promising early results., (© 2023. Arthroplasty Society in Asia.)

Dispersion relations govern wave behaviors, and tailoring them is a grand challenge in wave manipulation. We demonstrate the inverse design of phononic dispersion using nonlocal interactions on one-dimensional spring-mass chains. For both single-band and double-band cases, we can achieve any valid dispersion curves with analytical precision. We further employ our method to design phononic crystals with multiple ordinary (roton or maxon) and higher-order (undulation) critical points and investigate their wave packet dynamics.

Purpose: Cross-linked polyethylene (PE) has been used with great clinical success in total hip arthroplasty (THA) since its debut in the late 1990's. However, reports regarding this bearing couple near the end of its second decade of service are still scant. The aim of this study was to first determine the long term clinical and radiological results and second Investigate what factors affect wear rates using a metal-on-crosslinked PE bearing articulation., Methods: 55 THAs using a single brand of cross-linked liner, cementless cup and 28 mm hip ball were performed in 44 patients. Age, sex, Charlson Comorbidity Index (CCI) and need for revision surgery were recorded. Linear and volumetric wear was determined using the Martell method., Results: Mean age at operation was 51.2 (29-73 ± 12.1) years. Mean duration of follow-up was 16.9 years (range 15.0-20.1 ± 1.1 years). Osteolysis was not present in the latest follow-up radiographs. Median linear and volumetric wear rate was 0.038 mm/year (95% CI 0.032-0.047) and 7.115mm3/year (95% CI 6.92-17.25) respectively. Acetabular component position was not found to be related to both linear and volumetric wear. No significant difference was found in the linear and volumetric wear rates of thinner and thicker liners (8 mm or below and > 8 mm) (p = 0.849 and p = 0.64 respectively)., Conclusion: Metal-on-crosslinked PE is associated with low linear and volumetric wear rates which has virtually obviated osteolysis and has translated to excellent survivorship even at long term follow up. In-vivo oxidation does not appear to be of clinical concern at this point., (© 2023. The Author(s) under exclusive licence to SICOT aisbl.)

The usage of telemedicine and telehealth services has grown tremendously and has become increasingly relevant and essential. Technological advancements in current telehealth services have supported its use as a viable alternative tool to conduct visits for consultations, follow-up, and rehabilitation in total joint arthroplasty. Such technology has been widely implemented, particularly during the coronavirus 2019 (COVID-19) pandemic, to deliver postoperative rehabilitation among patients receiving total joint arthroplasty (TJA), further demonstrating its feasibility with a lower cost yet comparable clinical outcomes when compared with traditional care. There remains ample potential to utilize telemedicine for prehabilitation to optimize the preoperative status and postoperative outcomes of patients with osteoarthritis. In this review, various implementations of telemedicine within total joint arthroplasty and future application of telemedicine to deliver tele-prehabilitation in TJA are discussed., (© 2023. The Author(s).)

Background: Isolated liner exchange is an option to address polyethylene wear after total hip arthroplasty (THA). The liner can be fixed with either the original locking mechanism or cemented into the acetabular cup. Whether the method used for liner fixation has any bearing on the outcomes in the first and second decade after surgery is still unclear., Methods: Data for all patients who had undergone isolated liner exchange surgery in our institution between April 1995 and January 2015 were retrieved. Patients were classified according to the type of polyethylene liner (conventional or highly crosslinked polyethylene) and the locking mechanism used (original locking mechanism or cemented). Survivorship and revision rates were compared among different subgroups. A total of 118 isolated liner exchanges were performed and patients had a mean duration of follow-up of 13 years (range, 5 to 25)., Results: Overall estimated mean survivorship was 17 years. Use of highly crosslinked polyethylene (HXLPE) had a lower re-revision rate compared to conventional liners (10.5 versus 46.9%) (P < .001). The re-revision rate of exchanges using HXLPE was not affected by the type of fixation (original locking mechanism 11.1 versus cement 10.0%, P = .868). Conversely, using the original locking mechanism with a conventional liner had a higher re-revision rate compared to cemented conventional liners (58.3 versus 12.5%) (P = .024)., Conclusion: HXLPE liners should be used in insert exchange surgery whenever possible. Re-revision rate of exchanges using HXLPE was not affected by the fixation technique used. Cementing an insert into an acetabular component is associated with good survivorship at a mean of 13 years follow-up., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: Total knee arthroplasty is a commonly performed elective orthopaedic surgery. Patients may endure substantial knee swelling following surgery, which are attributable to both effusion and edema. Studies have been aiming to identify an accurate and reliable method to quantify post-operative knee swelling to aid monitoring progress and treatment. The aim of this article was to review the means of clinically applicable measurements for knee swelling post TKA., Methods: The medical literature was searched using PubMed to search for articles published using the terms knee edema, effusion, swelling, knee arthroplasty, knee replacement, total knee arthroplasty, total knee replacement, TKA, TKR. Year of publication was not restricted. Only English language publications were included. Only full-text published articles from peer-reviewed journals were eligible for inclusion. The knee swelling measurement methods used in post TKA were reviewed., Results: Advancement in bioimpedance spectroscopy and handheld 3D scanning technology allows quick and precise quantification of knee swelling volume that the traditional clinical circumferential measurement and volumetric measurement lack. Handheld 3D scanning is also a potential tool to estimate the change of knee effusion volume and muscular volume after the surgery. Magnetic resonance imaging is accurate in effusion measurement but also the most time and resource demanding method., Conclusion: Bioimpedance spectroscopy and 3D scanning technology can be the future tools for clinically measurement of knee swelling after total knee arthroplasty.

Background: Surgical site infection following joint replacement surgery is still a significant complication, resulting in repeated surgery, prolonged antibiotic therapy, extended postoperative hospital stay, periprosthetic joint infection, and increased morbidity and mortality. This review discusses the risk factors associated with surgical site infection., Related Risk Factors: The patient-related factors include sex, age, body mass index (BMI), obesity, nutritional status, comorbidities, primary diagnosis, living habits, and scores of the American Society of Anesthesiologists physical status classification system, etc. Surgery-related factors involve preoperative skin preparation, prolonged duration of surgery, one-stage bilateral joint replacement surgery, blood loss, glove changes, anti-microbial prophylaxis, topical anti-bacterial preparations, wound management, postoperative hematoma, etc. Those risk factors are detailed in the review., Conclusion: Preventive measures must be taken from multiple perspectives to reduce the incidence of surgical site infection after joint replacement surgery., (© 2022. The Author(s).)

Background: Artificial intelligence is an emerging technology with rapid growth and increasing applications in orthopaedics. This study aimed to summarize the existing evidence and recent developments of artificial intelligence in diagnosing knee osteoarthritis and predicting outcomes of total knee arthroplasty., Methods: PubMed and EMBASE databases were searched for articles published in peer-reviewed journals between January 1, 2010 and May 31, 2021. The terms included: 'artificial intelligence', 'machine learning', 'knee', 'osteoarthritis', and 'arthroplasty'. We selected studies focusing on the use of AI in diagnosis of knee osteoarthritis, prediction of the need for total knee arthroplasty, and prediction of outcomes of total knee arthroplasty. Non-English language articles and articles with no English translation were excluded. A reviewer screened the articles for the relevance to the research questions and strength of evidence., Results: Machine learning models demonstrated promising results for automatic grading of knee radiographs and predicting the need for total knee arthroplasty. The artificial intelligence algorithms could predict postoperative outcomes regarding patient-reported outcome measures, patient satisfaction and short-term complications. Important weaknesses of current artificial intelligence algorithms included the lack of external validation, the limitations of inherent biases in clinical data, the requirement of large datasets in training, and significant research gaps in the literature., Conclusions: Artificial intelligence offers a promising solution to improve detection and management of knee osteoarthritis. Further research to overcome the weaknesses of machine learning models may enhance reliability and allow for future use in routine healthcare settings., (© 2022. The Author(s).)

Introduction: Peri-prosthetic joint infection (PJI) was one of the main causes of revision of arthroplasty. In order to reduce wound complications and surgical site infections, close incisional negative pressure wound therapy (ciNPWT) has been introduced into arthroplasty. This study was designed to review the clinical benefits of the application of ciNPWT in revision arthroplasty., Methods: This was a single-centre retrospective comparative study approved by the Institutional Review Board. Patients, who underwent revision total knee arthroplasty or revision total hip arthroplasty at the author's institution from January 2016 to October 2019, were included in this study. The ciNPWT cohort included all eligible patients, who underwent operations from January 2018 to October 2019, with the use of ciNPWT(n = 36). The control cohort included all eligible patients, who underwent operations from January 2016 to December 2017 with the use of conventional dressing(n = 48). The incidences of wound complications were compared to both cohorts., Results: There was a statistically significant difference in the rate of superficial surgical site infection (SSI) between control cohort and ciNPWT cohort (12.5% in control vs 0% in ciNPWT, p = 0.035). However, there was no statistically significance of the overall wound complication rate for both cohorts. (14.6% in control vs 8.3% in ciNPWT, p = 0.504)., Conclusions: The application of ciNPWT could result in a lower rate of superficial surgical site infection when compared with conventional dressing among the patients undergoing revision total knee and total hip arthroplasties., Trial Registration: UW19-706., (© 2021. The Author(s).)

Microscale propulsion impacts a diverse array of fields ranging from biology and ecology to health applications, such as infection, fertility, drug delivery, and microsurgery. However, propulsion in such viscous drag-dominated fluid environments is highly constrained, with time-reversal and geometric symmetries ruling out entire classes of propulsion. Here, we report the spontaneous symmetry-breaking propulsion of rotating spherical microparticles within non-Newtonian fluids. While symmetry analysis suggests that propulsion is not possible along the fore-aft directions, we demonstrate the existence of two equal and opposite propulsion states along the sphere's rotation axis. We propose and experimentally corroborate a propulsion mechanism for these spherical microparticles, the simplest microswimmers to date, arising from nonlinear viscoelastic effects in rotating flows similar to the rod-climbing effect. Similar possibilities of spontaneous symmetry-breaking could be used to circumvent other restrictions on propulsion, revising notions of microrobotic design and control, drug delivery, microscale pumping, and locomotion of microorganisms.

Background: Postoperative pain remains a major barrier to a patient's recovery after total knee arthroplasty (TKA). Periarticular corticosteroids in local infiltration analgesics (LIA) and high-dose intravenous corticosteroids have individually shown to improve pain control after TKA. However, potential interactions between them have not been investigated. This study aims to evaluate any combination effect of both routes of corticosteroids in TKA., Methods: This is a double-blinded, paired, randomized controlled trial involving 1-stage bilateral TKAs. All received 16 mg of dexamethasone intravenously. One knee was randomized to receive LIA with 40 mg of triamcinolone, while the other knee receives LIA without corticosteroids. For each patient, one knee was affected by intravenous steroids only, while the other was under the combined effect of intravenous and periarticular steroids (IVPAS). Knee pain, Southampton wound scores, and functional knee scores (Knee Society Knee Score and Oxford Knee Scores) were compared between knees of the same patient., Results: Forty-six patients (92 TKAs) were included. IVPAS knees showed significantly lower visual analog scale scores from day 1 to 6 weeks (P < .05) and a larger range of movement from day 2 to 4 (P < .05). IVPAS knees achieved active straight leg raise earlier than intravenous steroids (1.6 vs 2.3 days, P < .05). No differences in Southampton wound scores and functional knee scores for up to 1 year., Conclusion: Combining intravenous and periarticular corticosteroids improved pain control and recovery after TKA with no increase in wound complications up to 1 year., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Background: Arthroplasty services worldwide have been significantly disrupted by the pandemic of coronavirus disease 2019 (COVID-19). This retrospective comparative study aimed to characterize its impact on arthroplasty services in Hong Kong., Methods: From January 1 to June 30, 2020, the patients of "COVID-19 cohort" underwent elective total hip or knee replacement in Hong Kong public hospitals. The cohort was compared to the "control cohort" during the same period in 2019. Data analysis was performed to compare the two cohorts' numbers of operations, hospital admission, orthopaedic clinic attendances, and waiting time., Results: A total of 33,111 patient episodes were analyzed. During the study period, the elective arthroplasty operations and hospitalizations decreased by 53 and 54%, respectively ( P  < 0.05). Reductions were most drastic from February to April, with surgical volume declining by 86% ( P  < 0.05). The primary arthroplasty operations decreased by 91% ( P  < 0.05), while the revision operations remained similar. Nevertheless, 14 public hospitals continued performing elective arthroplasty for patients with semi-urgent indications, including infection, progressive bone loss, prosthesis loosening, dislocation or mechanical failure of arthroplasty, and tumor. At the institution with the highest arthroplasty surgical volume, infection (28%) was the primary reason for surgery, followed by prosthesis loosening (22%) and progressive bone loss (17%). The orthopaedic clinic attendances also decreased by 20% ( P  < 0.05). Increases were observed in waiting time and the total number of patients on the waiting list for elective arthroplasty., Conclusions: Despite the challenges, public hospitals in Hong Kong managed to continue providing elective arthroplasty services for high-priority patients. Arthroplasty prioritization, infection control measures, and post-pandemic service planning can enhance hospital preparedness to mitigate the impact of current and future pandemics., Competing Interests: Competing interestsChun Hoi Yan and Peter KY Chiu are members of the Editorial Board of Arthroplasty and other authors declare that they have no competing interests. All authors were not involved in the journal’s review of or decisions related to this manuscript., (© The Author(s) 2021.)

Background: Corticosteroids can reduce pain but the optimal dose and safety profiles are still uncertain., Objective: This study aimed to evaluate two different doses of dexamethasone for pain management and their side effects after total knee arthroplasty., Design: A prospective randomised, controlled trial., Setting: A tertiary teaching hospital in Hong Kong., Patients: One hundred and forty-six patients were randomly allocated to one of three study groups., Interventions: Before operation, patients in group D8, D16 and P received dexamethasone 8 mg, dexamethasone 16 mg and placebo (0.9% saline), respectively., Main Outcome Measures: The primary outcome was postoperative pain score. Secondary outcomes were opioid consumption, physical parameters of the knees and side effects of dexamethasone., Results: Compared with placebo, group D16 patients had significantly less pain during maximal active flexion on postoperative day 3 [-1.3 (95% CI, -2.2 to -0.31), P = 0.005]. There was also a significant dose-dependent trend between pain scores and dexamethasone dose (P = 0.002). Compared with placebo, patients in group D16 consumed significantly less opioid [-6.4 mg (95% CI, -11.6 to -1.2), P = 0.025] and had stronger quadriceps power on the first three postoperative days (all P < 0.05). They also had significantly longer walking distance on postoperative day 1 [7.8 m ([95% CI, 0.85 to 14.7), P = 0.023] with less assistance during walking on the first two postoperative days (all P < 0.029) and significantly better quality-of-recovery scores on postoperative day 1 (P = 0.018). There were significant dose-dependent trends between all the above parameters and dexamethasone dose (all P < 0.05). No significant differences were found in the incidence of chronic pain or knee function 3, 6 and 12 months postoperatively., Conclusion: Dexamethasone 16 mg given before total knee arthroplasty led to a reduction in postoperative pain, less opioid consumption, stronger quadriceps muscle power, better mobilisation and better overall quality-of-recovery after operation. No long-term improvement in reduction in pain and function of the knee was found., Trial Registration: ClinicalTrials.gov identifier: NCT02767882.

Introduction: Total knee arthroplasty (TKA) in the elderly population is becoming increasingly prevalent. This study aimed to compare outcomes of patients aged ≥80 years with those aged < 80 years at time of TKA and to assess the effect of fast track peri-operative care on outcomes in the elderly., Materials and Methods: 422 TKAs were performed in aged ≥80 at the time of surgery between 2009 and 2018. A control group aged < 80 years (37-79 +/- 7.6) was established. Peri-operative mortality, complications, 30-day re-admission, length of stay (LOS) and rehabilitation parameters were recorded., Results: Mean age at operation for the ≥80's group and control group was 82.7 (80-93+/- 2.5) and 69.3 (37-79+/- 7.6) years respectively. Post-operative Knee Society Functional Assessment (KSFA) scores were higher in the control group (49 vs. 57, p = 0.003). Average LOS was longer in the ≥80's group (17.2 vs. 12.4 days respectively, p < 0.01). Mortality within 3 months of operation was 0.7% in the ≥80 group and 0% in the control group. Incidence of complications was comparable between the two groups at 12.8 and 12.9% for the group ≥80's and control groups respectively (p = 0.962). Patients ≥80 years, receiving fast track peri-operative care had significantly shorter LOS and higher post-operative KSFA scores at all time points post-operation and shorter LOS (p < 0.01) compared to those who received conventional rehabilitation. LOS was longer in the ≥80's group, which was likely related to higher levels of comorbidities. Complications were comparable in the two groups but were more severe in the elderly. Mortality rate after TKA was very low even in those over the age of 80. Younger patients benefited more in terms of functional improvement after TKA., Conclusion: TKA is a safe and efficacious procedure for the elderly. More severe complications, longer length of stay and smaller gains in functional improvement can be expected in the elderly compared to younger patients. Fast track peri-operative care is useful in improving outcomes after TKA for elderly patients., (© 2020. The Author(s).)

Background: Increase in acetabular cup abduction in total hip arthroplasty (THA) using conventional polyethylene is associated with greater linear wear. Whether this relationship holds true for highly crosslinked liners, particularly with long-term follow-up, is still controversial. The effect of liner thickness on wear of highly cross-linked liners also remains to be clarified.This study sought to determine (1) the long-term clinical and radiological performance of highly cross-linked polyethylene in THA and (2) the effect of acetabular component positioning, polyethylene thickness, and patient demographics on wear., Methods: Ninety-three THAs using a 28-mm hip ball, single brand of highly cross-linked polyethylene liner, and cementless cup were performed in 87 patients. Clinical outcomes were evaluated using the Harris Hip Score and need for revision surgery. Linear and volumetric wear, presence of osteolysis, and cup abduction angle were assessed., Results: The mean age at operation was 51.4 years. The mean duration of follow-up was 12.7 years (10-16 years). Patients aged >50 years had higher rates of linear wear than those aged <50 years (P = .015). Positive correlation was found between cup abduction angle (P = .014) and cup version (P = .035) with a linear wear rate. Thinner liners (≤7 mm) had similar rates of linear and volumetric wear as thicker liners (≥8 mm) (P = .447)., Conclusion: This is the only study to demonstrate a positive significant relationship between cup abduction angle and version with linear wear rate in THA with at least 10 years of follow-up. Liner thickness was not found to affect wear rates., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The influence of a plane boundary on low-Reynolds-number swimmers has frequently been studied using image systems for flow singularities. However, the boundary effect can also be expressed using a boundary integral representation over the traction on the boundary. We show that examining the traction pattern on the boundary caused by a swimmer can yield physical insights into determining when far-field multipole models are accurate. We investigate the swimming velocities and the traction of a three-sphere swimmer initially placed parallel to an infinite planar wall. In the far field, the instantaneous effect of the wall on the swimmer is well approximated by that of a multipole expansion consisting of a force dipole and a force quadrupole. On the other hand, the swimmer close to the wall must be described by a system of singularities reflecting its internal structure. We show that these limits and the transition between them can be independently identified by examining the traction pattern on the wall, either using a quantitative correlation coefficient or by visual inspection. Last, we find that for nonconstant propulsion, correlations between swimming stroke motions and internal positions are important and not captured by time-averaged traction on the wall, indicating that care must be taken when applying multipole expansions to study boundary effects in cases of nonconstant propulsion.

Objective: To evaluate the effectiveness of various orthotic treatments for patients with isolated medial compartment osteoarthritis., Design: Prospective cohort study with sequential interventions., Setting: University-affiliated hospital, Hong Kong., Patients: From December 2010 to November 2011, 10 patients with medial knee osteoarthritis were referred by orthopaedic surgeons for orthotic treatment. All patients were sequentially treated with flat insole, lateral-wedged insole, lateral-wedged insole with subtalar strap, lateral-wedged insole with arch support, valgus knee brace, and valgus knee brace with lateral-wedged insole with arch support for 4 weeks with no treatment break. Three-dimensional gait analysis and questionnaires were completed after each orthotic treatment., Main Outcome Measures: The Western Ontario and McMaster Universities Arthritis Index (WOMAC), visual analogue scale scores, and peak and mean knee adduction moments., Results: Compared with pretreatment, the lateral-wedged insole, lateral-wedged insole with arch support, and valgus knee brace groups demonstrated significant reductions in WOMAC pain score (19.1%, P=0.04; 18.2%, P=0.04; and 20.4%, P=0.02, respectively). The lateral-wedged insole with arch support group showed the greatest reduction in visual analogue scale score compared with pretreatment at 24.1% (P=0.004). Addition of a subtalar strap to lateral-wedged insoles (lateral-wedged insole with subtalar strap) did not produce significant benefit when compared with the lateral-wedged insole alone. The valgus knee brace with lateral-wedged insole with arch support group demonstrated an additive effect with a statistically significant reduction in WOMAC total score (-26.7%, P=0.01). Compliance with treatment for the isolated insole groups were all over 90%, but compliance for the valgus knee brace-associated groups was only around 50%. Gait analysis indicated statistically significant reductions in peak and mean knee adduction moments in all orthotic groups when compared with a flat insole., Conclusions: These results support the use of orthotic treatment for early medial compartment knee osteoarthritis.

We show that plane parabolic flow in a microfluidic channel causes nonmotile, helically shaped bacteria to drift perpendicular to the shear plane. Net drift results from the preferential alignment of helices with streamlines, with a direction that depends on the chirality of the helix and the sign of the shear rate. The drift is in good agreement with a model based on resistive force theory, and separation is efficient (>80%) and fast (<2 s). We estimate the effect of Brownian rotational diffusion on chiral separation and show how this method can be extended to separate chiral molecules.