Search

Background: Previous studies have shown that surgical technique errors especially the wrong bone tunnel position are the primary reason for the failure of anterior cruciate ligament (ACL) reconstruction. In this study, we aimed to compare the femoral tunnel position and impact on knee function during the ACL reconstruction using measuring combined with fluoroscopy method and bony marker method for femoral tunnel localization., Methods: A retrospective cohort study of patients undergoing ACL reconstruction using the bony marker method or measuring combined with fluoroscopy for femoral tunnel localization was conducted between January 2015 and January 2020. A second arthroscopic exploration was performed more than 1 year after surgery. Data regarding patient demographics, the femoral tunnel position, results of the Lysholm score, the International Knee Documentation Committee (IKDC) score, KT-1000 side-to-side difference, pivot shift grade, and Lachman grade of the knee were collected., Results: A total of 119 patients were included in the final cohort. Of these, 42 cases were in the traditional method group, and 77 cases were in the measuring method group. The good tunnel position rate was 26.2% in the traditional method group and 81.8% in the measuring method group (p < 0.001). At the final follow-up, the Lysholm and IKDC scores were significantly greater in the measuring method group than the traditional method group (IKDC: 84.9 ± 8.4 vs. 79.6 ± 6.4, p = 0.0005; Lysholm: 88.8 ± 6.4 vs. 81.6 ± 6.4, p < 0.001). Lachman and pivot shift grades were significantly greater in the measuring method group (p = 0.01, p = 0008). The results of KT-1000 side-to-side differences were significantly better in the measuring method group compared with those in the traditional method group (p < 0.001)., Conclusions: The combination of the measuring method and intraoperative fluoroscopy resulted in a concentrated tunnel position on the femoral side, a high rate of functional success, improved knee stability, and a low risk of tunnel deviation. This approach is particularly suitable for surgeons new to ACL reconstructive surgery., (© 2024. The Author(s).)

This study investigated the relationship between A body shape index (ABSI) and bone mineral density (BMD) in older Americans and found a negative linear association, which was particularly pronounced in diabetic population. An early focus on ABSI in the elderly population will help in the prevention of osteoporosis., Objective: A body shape index (ABSI) is an abdominal obesity index developed based on epidemiological statistics and high ABSI indicates that waist circumference (WC) is higher than expected for a given height and weight and corresponds to a more central concentration of body volume. The objective of this study was to determine whether there is a linear or nonlinear relationship between ABSI and total femur bone mineral density (BMD) in older Americans and whether the relationship between the ABSI and total femur BMD varies across populations., Methods: This cross-sectional study was based on data from the 2007-2018 National Health and Nutrition Examination Survey (NHANES). Weighted multiple linear regression, restricted cubic spline (RCS) curves, subgroup analysis, and interaction tests were used to examine the association between ABSI and total femur BMD., Results: This study included 2505 older adults. This study found a negative linear correlation between ABSI and total femur BMD (β = -3.2, 95%CI: -5.0, -1.4, p < 0.001). When participants were grouped according to quartiles of ABSI, those in the upper quartile had lower total femur BMD compared to those in the bottom quartile of ABSI. This negative association remained consistent across gender, age, education level, smoking, physical activity and BMI subgroups. However, in the diabetes subgroup, ABSI showed a stronger negative association with total femur BMD., Conclusions: The study shows a negative linear association between ABSI and total femur BMD in older Americans, with this negative association being stronger in the diabetic population., (© 2024. International Osteoporosis Foundation and Bone Health and Osteoporosis Foundation.)

Background: This study aimed to demonstrate the occurrence of lower extremity deformities and their risk factors in patients with solitary osteochondromas., Methods: We retrospectively reviewed consecutive patients with solitary osteochondromas around the knee. The laterality (left or right), involved bone (femur or tibia), tumor type (pedunculated or sessile), and direction (medial or lateral) were examined. The whole limb length (WLL), mechanical lateral distal femoral angle (mLDFA), and medial proximal tibial angle (MPTA) were measured using teleroentgenogram. Lower limb deformity was defined as a difference of more than 5° in mLDFA or MPTA in both lower extremities or a difference in WLL of more than 1 cm. Patients were divided into two groups, with deformity and without deformity., Results: Lower extremity deformities were observed in 8 of 83 patients. Significant difference in the type of osteochondroma (p = 0.004) between the groups was observed. Differences in sex, age, laterality, involved bone, direction, and distance from the physis to the osteochondroma between groups were not statistically significant. The sessile type of osteochondroma was a risk factor for lower limb deformity with an odds ratio of 24.0 according to Firth's logistic regression analysis., Conclusion: In our cohort with solitary osteochondroma, lower limb deformities were observed in 8 (9.6%) out of the 83 patients and these were significantly associated with sessile-type tumors. Therefore, patients with sessile-type solitary osteochondroma around the knee require careful surveillance of lower limb alignment with whole leg teleroentgenogram., (© 2024. The Author(s).)

Background: The inclusion of a connecting path in a porous implant can promote nutrient diffusion to cells and enhance bone ingrowth. Consequently, this study aimed to evaluate the biomechanical, radiographic, and histopathological performance of a novel 3D-printed porous suture anchor in a rabbit femur model., Methods: Three test groups were formed based on the type of suture anchor (SA): Commercial SA (CSA, Group A, n = 20), custom solid SA (CSSA, Group B, n = 20), and custom porous SA (CPSA, Group C, n = 20). The SAs were implanted in the lateral femoral condyle of the right leg in each rabbit. The rabbits (New Zealand white rabbits, male, mean body weight of 2.8 ± 0.5 kg, age 8 months) underwent identical treatment and were randomized into experimental and control groups via computer-generated randomization. Five rabbits (10 femoral condyles) were euthanized at 0, 4, 8, and 12 weeks post-implantation for micro-CT, histological analysis, and biomechanical testing., Results: At 12 weeks, the CPSA showed a higher BV/TV (median 0.7301, IQR 0.7276-0.7315) than the CSSA and CSA. The histological analysis showed mineralized osteocytes near the SA. At 4 weeks, new bone was observed around the CPSA and had penetrated its porous structure. By 12 weeks, there was no significant difference in ultimate failure load between the CSA and CPSA., Conclusions: We demonstrated that the innovative 3D-printed porous suture anchor exhibited comparable pullout strength to conventional threaded suture anchors at the 12-week postoperative time-point period. Furthermore, our porous anchor design enhanced new bone formation and facilitated bone growth into the implant structure, resulting in improved biomechanical stability., (© 2024. The Author(s).)

Purpose: This prospective study aimed to compare the postoperative evaluation of the quadrant method measuring four points and Bernard method in femoral tunnel position evaluation on 3-Dimensional (3D) reconstructed computed tomography (CT) following the arthroscopic single-bundle anterior cruciate ligament (ACL) reconstruction., Methods: Thirty-eight patients with ACL tears that were reconstructed using single-bundle ACL reconstruction between May 2021 and March 2023 were included in this study. Postoperative 3D CT images were obtained after the operation. The femoral tunnel position was measured by use of the quadrant method measuring four points and Bernard method., Results: Average mean position of the femoral tunnel insertion center on the 3D CT image was at 26.16 ± 6.27% in the x-coordinate and at 24.36 ± 5.52% in the y-coordinate according to the Bernard method. Meanwhile, the position of the femoral insertion of the ACL measured by the quadrant method measuring four points was 24.2% ± 6.86% in the x-coordinate and 21.16% ± 5.14% in the y-coordinate., Conclusions: Both the quadrant method measuring four points and Bernard method were effective in femoral tunnel position evaluation on 3D reconstructed CT. Application of the quadrant method measuring four points on 3D CT showed the advantage that measurement can be taken regardless of the shape of the bone tunnel., (© 2024. The Author(s).)

Bone segmentation is an important step to perform biomechanical failure load simulations on in-vivo CT data of patients with bone metastasis, as it is a mandatory operation to obtain meshes needed for numerical simulations. Segmentation can be a tedious and time consuming task when done manually, and expert segmentations are subject to intra- and inter-operator variability. Deep learning methods are increasingly employed to automatically carry out image segmentation tasks. These networks usually need to be trained on a large image dataset along with the manual segmentations to maximize generalization to new images, but it is not always possible to have access to a multitude of CT-scans with the associated ground truth. It then becomes necessary to use training techniques to make the best use of the limited available data. In this paper, we propose a dedicated pipeline of preprocessing, deep learning based segmentation method and post-processing for in-vivo human femurs and vertebrae segmentation from CT-scans volumes. We experimented with three U-Net architectures and showed that out-of-the-box models enable automatic and high-quality volume segmentation if carefully trained. We compared the failure load simulation results obtained on femurs and vertebrae using either automatic or manual segmentations and studied the sensitivity of the simulations on small variations of the automatic segmentation. The failure loads obtained using automatic segmentations were comparable to those obtained using manual expert segmentations for all the femurs and vertebrae tested, demonstrating the effectiveness of the automated segmentation approach for failure load simulations., (© 2024. The Author(s).)

Hypothesis/purpose: The prevalence of trochlear dysplasia is common in different populations., Background: The prevalence of trochlear dysplasia in the general population, categorised by sex, race, age, and body mass index, has been sparse. This study aimed to define the prevalence of trochlear dysplasia based on the latter categories., Study Design: Cohort retrospective study., Methods: 1162 skeletal mature healthy femora were obtained from a CT-scan-based modelling system (SOMA). Thin slice CT scans were acquired exclusively for medical indications such as polytrauma (20%), CT angiography (70%) and other reasons (i.e. Total Joint Replacement) (10%). Trochlear dysplasia was measured using Pfirmann's method. Patient demographics such as age, race and sex were recorded., Results: The overall prevalence of trochlear dysplasia is 4.5% and is far more common in Asian female patients compared to Caucasian, African and Middle Eastern knees., Conclusion: Overall, the prevalence of dysplasia in the general population was determined to be 4.5%, with female patients being more likely to suffer from the condition. Patients of Asian and Caucasian race were more likely to have trochlear dysplasia, while Middle Eastern male patients displayed more dysplastic values than their female counterparts., (© 2024. The Author(s).)

The purpose was to examine (1) the effect of measurement position and sex on femoral cartilage outcomes, and (2) the association between gait biomechanics and cartilage outcomes. Fifty individuals participated (25 males and 25 females; age = 20.62 [1.80] y). Ultrasound measured femoral cartilage thickness and echo-intensity at 90°, 115°, and 140° of knee flexion. Gait outcomes included the external knee adduction and knee flexion moments. Cartilage outcomes were compared using 2 (sex) × 3 (position) repeated-measures analysis of variance. Gait and cartilage associations were assessed using stepwise regression. Medial cartilage was thicker when measured at 90° compared with 115° (P = .02) and 140° (P < .01), and 115° compared with 140°, (P < .01) in males but not in females. Cartilage was thicker at 90° compared with 140° across both sexes within all regions (P < .01). Males had thicker cartilage than females in all positions (P < .01). Echo-intensity was lower at 90° than 115° (P < .01) and 140° (P = .01) in the central and lower at 90° than at 115° (P < .01) and 140° (P = .03) in lateral regions. No association was found between gait and cartilage outcomes. Ultrasound imaging position effects cartilage features more in males compared with females. Imaging position and sex influence cartilage outcomes and should be considered in study designs and clinical evaluation.

Background: Shorter, metaphyseal-filling collared stems have become popular with the direct anterior approach (DAA), based on their ease of broaching and insertion through less invasive surgical exposures. To aid with the DAA, robotic-assisted technology provides three-dimensional computed tomography (CT) preoperative planning and intraoperative guidance to accurately assess stem version. With other femoral stems, this has been shown to provide more accurate implant planning and improved patient outcomes. The purpose of this study was to understand femoral stem placement predictability and patient outcomes for a newly designed metaphyseal-filling collared stem system through a DAA in combination with a robotic-assisted system during a single surgeon's initial cases., Materials and Methods: A single high-volume surgeon, experienced with robotic-assisted DAA total hip arthroplasty (THA), adopted the use of a metaphyseal-filling collared stem. Intraoperative data and patient outcomes up to six months postoperative were collected prospectively during the surgeon's first 123 cases. Student's t-tests (α=0.05) were used for statistical comparisons. Intraoperative and radiographic assessments were performed for all 123 cases., Results: The estimated version with neck-cut view of the robotic-assisted system was 13.81 ± 3.81°. The final version measurement captured with the robotic-assisted system was 16.56 ± 6.61°. The difference between the estimated version and robotic-assisted measured version was, on average, 2.68 ± 5.7° (p<0.001). The femoral stem sat at the level of the calcar in all but five cases. There were no intraoperative or postoperative periprosthetic fractures. Patients reported significant improvements in reduced Hip dysfunction and Osteoarthritis Outcome Score for Joint Replacement (HOOS-JR), Patient-Reported Outcomes Measurement Information System (PROMIS 10), and Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores throughout their six-month recovery process with no patients reporting a periprosthetic joint infection, fracture, or dislocation., Conclusion: The use of a metaphyseal-filling collared stem with robotic-assisted DAA resulted in adequate stem version when assessed visually and with CT scan assessments. Version estimation values were improved upon over visual assessments when using the robotic system that maps out the proximal femur and the improvement was also demonstrated when compared to the prior literature. This may also be related to the stem's collar providing a visual guide during stem placement posterior fill of this triple-tapered stem design. Although further follow up is needed to assess longer-term outcomes, at six months postoperatively, patients had significant improvements in patient-reported outcomes with all patients reporting minimal to no restrictions with their THA.

Background: The rotational change after using a flexible intramedullary (IM) nail for femoral shaft fractures has been a concern for many surgeons. Recently, a statistical shape model (SSM) was developed for the three-dimensional reconstruction of the femur from two-dimensional plain radiographs. In this study, we measured postoperative femoral anteversion (FAV) in patients diagnosed with femoral shaft fractures who were treated with flexible IM nails and investigated age-related changes in FAV using the SSM., Methods: This study used radiographic data collected from six regional tertiary centers specializing in pediatric trauma in South Korea. Patients diagnosed with femoral shaft fractures between September 2002 and June 2020 and patients aged < 18 years with at least two anteroposterior (AP) and lateral (LAT) femur plain radiographs obtained at least three months apart were included. A linear mixed model (LMM) was used for statistical analysis., Results: Overall, 72 patients were included in the study. The average patient age was 7.6 years and the average follow-up duration was 6.8 years. The average FAV of immediate postoperative images was 27.5 ± 11.5°. Out of 72 patients, 52 patients (72.2%) showed immediate postoperative FAV greater than 20°. The average FAV in patients with initial FAV > 20° was 32.74°, and the LMM showed that FAV decreased by 2.5° (p = 0.0001) with each 1-year increase from the time of initial trauma., Conclusions: This study explored changes in FAV after femoral shaft fracture using a newly developed technology that allows 3D reconstruction from uncalibrated 2D images. There was a pattern of change on the rotation of the femur after initial fixation, with a 2.5° decrease of FAV per year., (© 2024. The Author(s).)

Synovitis-acne-pustulosis-hyperostosis-osteomyelitis (SAPHO) syndrome is characterised by aseptic osteitis and is often complicated by pustular dermatitis, such as palmoplantar pustulosis or acne. Although bone lesions are most found in the anterior thoracic region or spine, femoral lesions are not well documented in the literature. There is no established treatment for this condition, and few reports have described its long-term course. Here, we describe two cases of SAPHO syndrome involving the femur and discuss their long-term follow-up. A 40-year-old man (Case 1) presented with right thigh pain. Fifteen years after the initial diagnosis, the pain could be controlled with minomycin, salazosulfapyridine, and methotrexate. X-rays of the femur showed gradual cortical thickening. Although there were waves of pain, it gradually improved with the adjustment of drugs 25 years following the initial diagnosis. A 35-year-old man (Case 2) with right thigh pain was prescribed salazosulfapyridine and methotrexate; however, these were ineffective. Alendronate and guselkumab also proved ineffective. Ultimately, infliximab was started 9 years following disease onset, and pain became manageable. X-rays of the femur showed cortical thickening. SAPHO syndrome can be managed with drug therapies, such as nonsteroidal anti-inflammatory drugs, methotrexate, and conventional synthetic disease-modifying antirheumatic drugs; however, there are occasional treatment-resistant cases., (© Japan College of Rheumatology 2024. Published by Oxford University Press. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site–for further information please contact journals.permissions@oup.com.)

Background: This experimental study aimed at directly comparing conventional and endoscopic-assisted curettage towards (1) amount of residual tumour tissue (RTT) and (2) differences between techniques regarding surgical time and surgeons' experience level., Methods: Three orthopaedic surgeons (trainee, consultant, senior consultant) performed both conventional (4x each) and endoscopic-assisted curettages (4x each) on specifically prepared cortical-soft cancellous femur and tibia sawbone models. "Tumours" consisted of radio-opaque polyurethane-based foam injected into prepared holes. Pre- and postinterventional CT-scans were carried out and RTT assessed on CT-scans. For statistical analyses, percentage of RTT in relation to total lesion's volume was used. T-tests, Wilcoxon rank-sum tests, and Kruskal-Wallis tests were applied to assess differences between surgeons and surgical techniques regarding RTT and timing., Results: Median overall RTT was 1% (IQR 1 - 4%). Endoscopic-assisted curettage was associated with lower amount of RTT (median, 1%, IQR 0 - 5%) compared to conventional curettage (median, 4%, IQR 0 - 15%, p = 0.024). Mean surgical time was prolonged with endoscopic-assisted (9.2 ± 2.9 min) versus conventional curettage (5.9 ± 2.0 min; p = 0.004). No significant difference in RTT amount (p = 0.571) or curetting time (p = 0.251) depending on surgeons' experience level was found., Conclusions: Endoscopic-assisted curettage appears superior to conventional curettage regarding complete tissue removal, yet at expenses of prolonged curetting time. In clinical practice, this procedure may be reserved for cases at high risk of recurrence (e.g. anatomy, histology)., (© 2024. The Author(s).)

Background: Low hip bone mineral density (BMD) in patients who undergo total hip arthroplasty (THA) increases the risk of periprosthetic fractures, implant instability, and other complications. Recently, emphasis has been placed on bone health optimization: treating low BMD prior to a planned orthopaedic implant procedure in an effort to normalize BMD and reduce the potential risk of future complications. Abaloparatide is a U.S. Food and Drug Administration-approved osteoanabolic agent for men and postmenopausal women with osteoporosis and a candidate drug for bone health optimization that, in addition to benefits at the spine, increases hip BMD and reduces nonvertebral fracture risk. We hypothesized that abaloparatide would improve BMD in proximal femoral regions surrounding a virtual THA stem., Methods: This post hoc analysis obtained dual x-ray absorptiometry (DXA) hip scans from 500 randomly selected postmenopausal women with osteoporosis from the Phase-3 Abaloparatide Comparator Trial in Vertebral Endpoints (ACTIVE, NCT01343004) study after 0, 6, and 18 months of abaloparatide (250 patients) or placebo (250 patients). Hip DXA scans underwent 3-dimensional (3D) modeling via 3D-Shaper, followed by virtual resection of the proximal femur and simulated placement of a tapered, flat-wedge hip stem that guided delineation of the Gruen zones that were fully (zones 1 and 7) or largely (zones 2 and 6) captured in the scanning region. Integral, cortical, and trabecular volumetric BMD, cortical thickness, and cortical surface BMD (the product of cortical volumetric BMD and cortical thickness) were determined for each zone., Results: Compared with placebo, the abaloparatide group showed greater increases in integral volumetric BMD in all zones at months 6 and 18; cortical surface BMD in zones 1, 6, and 7 at month 6; cortical thickness, cortical volumetric BMD, and cortical surface BMD in all zones at month 18; and trabecular volumetric BMD in zones 1 and 7 at months 6 and 18., Conclusions: Abaloparatide increases BMD in proximal femoral regions that interact with and support femoral stems, suggesting that abaloparatide may have value for preoperative or potentially perioperative bone health optimization in patients with osteoporosis undergoing THA., Level of Evidence: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: Yamei Wang and John I. Boxberger are employees of the study funder, Radius Health, Inc. Renaud Winzenrieth and Ludovic Humbert work for 3D-Shaper Medical and are paid consultants who conducted the analysis. Funding for this study and the parent ACTIVE trial was provided by Radius Health, Inc., and 2 authors are employees of Radius. In addition, 1 author is an employee of and stockholder in 3D-Shaper, which is a paid consultant to and analytical partner of Radius as well as the manufacturer of the software used in the study, and another is a former employee of 3D-Shaper. Medical writing support was provided by Paul Kostenuik, PhD (Phylon Pharma Services), and was funded by Radius. Medical editorial support (Lacy Miron, PharmD [assembling tables and figures, collating author comments, copyediting, fact checking, and referencing]) and graphic services were provided by AOIC, LLC, and were funded by Radius. The Article Processing Charge for open access publication was funded by Radius. The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H991 )., (Copyright © 2024 The Authors. Published by The Journal of Bone and Joint Surgery, Incorporated.)

Trends toward more favorable improvement of the cortical bone parameters by once-weekly (56.5 μg once a week) and twice-weekly teriparatide (28.2 μg twice a week), and that of the trabecular bone parameters by once-daily (1/D) teriparatide (20 μg/day once a day) were shown., Purpose: To examine the effects of differences in the amount of teriparatide (TPTD) per administration and its dosing frequency on the bone structure in the proximal femur by dual-energy X-ray absorptiometry (DXA)-based 3D-modeling (3D-SHAPER software)., Methods: This was a multicenter retrospective study. Patients aged 50 years or older with primary osteoporosis who continuously received once-/twice-weekly (1・2/W, n = 60) or 1/D TPTD (n = 14) administration for at least one year were included in the study. Measurement regions included the femoral neck (FN), trochanter (TR), femoral shaft (FS), and total proximal hip (TH). Concurrently, the bone mineral density (BMD) and Trabecular Bone Score (TBS) were measured., Results: The cross-sectional area, cross-sectional moment of inertia, and section modulus in the FS were significantly improved in the 1・2/W TPTD group, as compared to the 1/D TPTD group. However, significant improvement of the cortical thickness and buckling ratio in the FN was observed in the 1/D TPTD group, as compared to the 1・2/W TPTD group. Trabecular BMD values in the FS and TH were significantly increased in the 1/D TPTD group, as compared to the 1・2/W TPTD group, while the cortical BMD values in the TR, FS, and TH were significantly increased in the 1・2/W TPTD group, as compared to the 1/D TPTD group., Conclusion: Trends toward more favorable improvement of the cortical bone by 1・2/W TPTD and that of the trabecular bones by 1/D TPTD were observed., (© 2024. International Osteoporosis Foundation and Bone Health and Osteoporosis Foundation.)

Creating musculoskeletal models in a paediatric population currently involves either creating an image-based model from medical imaging data or a generic model using linear scaling. Image-based models provide a high level of accuracy but are time-consuming and costly to implement, on the other hand, linear scaling of an adult template musculoskeletal model is faster and common practice, but the output errors are significantly higher. An articulated shape model incorporates pose and shape to predict geometry for use in musculoskeletal models based on existing information from a population to provide both a fast and accurate method. From a population of 333 children aged 4-18 years old, we have developed an articulated shape model of paediatric lower limb bones to predict bone geometry from eight bone landmarks commonly used for motion capture. Bone surface root mean squared errors were found to be 2.63 ± 0.90 mm, 1.97 ± 0.61 mm, and 1.72 ± 0.51 mm for the pelvis, femur, and tibia/fibula, respectively. Linear scaling produced bone surface errors of 4.79 ± 1.39 mm, 4.38 ± 0.72 mm, and 4.39 ± 0.86 mm for the pelvis, femur, and tibia/fibula, respectively. Clinical bone measurement errors were low across all bones predicted using the articulated shape model, which outperformed linear scaling for all measurements. However, the model failed to accurately capture torsional measures (femoral anteversion and tibial torsion). Overall, the articulated shape model was shown to be a fast and accurate method to predict lower limb bone geometry in a paediatric population, superior to linear scaling., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Purpose: The purpose of this study was to examine the intra- and interobserver variability of an app-based analysis of the femoral tunnel position using the quadrant method in primary anterior cruciate ligament reconstruction., Materials and Methods: Between 12/2020 und 12/2021 50 patients who underwent primary anterior cruciate ligament reconstruction were included in this retrospective study. Intraoperative strictly lateral fluoroscopic images of the knee with marked femoral tunnel were analyzed by four observers using the quadrant method. For retest reliability analysis, measurements were repeated once by 2 observers after 4 weeks., Results: The femoral tunnel position of all included patients averaged 27.86% in the depth relation and 15.61% in the height relation. Statistical analysis showed an almost perfect intra- and interobserver reliability in the depth and height relation. The ICC was 0.92 in the depth relation and 0.84 in the height relation. The Pearson's correlation coefficient in the depth and height relation of observer 1 (0.94/0.81) was only slightly different from the Pearson's correlation coefficient of observer 2 (0.92/0.85). The app-based tunnel analysis took on average 59 ± 16 s per measurement., Conclusion: The femoral tunnel analysis with the app-based quadrant method has an almost perfect intra- and interobserver reliability. By smartphone camera, a fast and highly accurate, if necessary also intraoperative, control of the tunnel position can be performed., Level of Evidence: Level 3-diagnostic retrospective cohort study., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Osteochondritis dissecans (OCD) is a condition characterized by abnormal subchondral bone with disturbance of overlying articular cartilage. The role of weightbearing alignment in the pathophysiology of OCD lesion development is not fully understood., Hypothesis: Lower extremity mechanical axis would be concordant with femoral condylar OCD lesion location., Study Design: Cross-sectional study; Level of evidence, 3., Methods: Cases were identified from a single, large academic institutional database using International Classification of Diseases, Ninth Revision and Tenth Revision and Current Procedural Terminology codes associated with OCD. Patients were included if they had a magnetic resonance imaging scan demonstrating the OCD lesion and lower extremity alignment radiographs. OCD lesion location was identified using Cahill and Berg zones. The primary outcome was the association of OCD lesion location with weightbearing mechanical axis. Secondary outcomes included the association of mechanical axis with skeletal maturity, OCD lesion stability, and treatment. For unilateral OCD lesions, mechanical axis was compared between affected and unaffected lower extremities., Results: A total of 86 patients (95 knees) with an OCD lesion of the femoral condyle were identified. The population was 74% male, and the mean age was 21 years. In total, 65% of knees had closed physes, 82% of lesions were unstable, and 85% underwent a surgical procedure. Mechanical axis was located in the same zone as the OCD lesion in 48% of cases and within the same compartment in 56% of cases. Spearman correlation coefficient demonstrated a moderate positive correlation (r s = 0.59). No significant differences were found in the association of mechanical axis and OCD lesion location in subgroup analysis of medial versus lateral femoral condylar OCD lesions, skeletal maturity, stability of the lesion, or treatment group. For patients with varus alignment and medial femoral condylar OCD lesions, the mean lateral distal femoral angle was 89.9°, and medial proximal tibial angle was 85.4°; for valgus alignment and lateral femoral condylar lesions, the lateral distal femoral angle was 84.8°, and medial proximal tibial angle was 88.8°. Patients with unilateral medial femoral condylar OCD lesions were more likely to have varus alignment of the affected extremity compared with the contralateral extremity (59% vs 36%; P = .01)., Conclusion: This study demonstrated a relationship between lower extremity mechanical weightbearing axis and femoral condylar OCD location. Patients with unilateral medial femoral condylar OCD lesions frequently had asymmetric varus alignment in the affected extremity., Competing Interests: Presented at the annual meeting of the AOSSM, Denver, Colorado, July 2024.One or more of the authors has declared the following potential conflict of interest or source of funding: J.A.G. has received research support from Joint Restoration Foundation Ortho, Arthrex, Aesculap Biologics, InGeneron, and MiMedX and consulting fee payments in the past 5 years from Arthrex, Vericel, and Joint Restoration Foundation. J.A.G. and S.R.M. have received educational funding from Pinnacle unrelated to content or outcomes of this study. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto.

Purpose: To explore the relationship between preoperative J-sign grading and structural bone abnormalities in patients with recurrent patellar dislocation (RPD)., Methods: A retrospective study was conducted on RPD patients over 5 years. Patients were categorised based on J-sign grade into low (J- and J1+), moderate (J2+) and high groups (J3+). Trochlear dysplasia (TD) and osseous structures (femoral anteversion angle [FAA], knee torsion, tibial tuberosity-trochlear groove [TT-TG] distance, Caton-Deschamps index) were assessed and grouped according to risk factor thresholds. The χ 2 test was used to compare composition ratio differences of structural bone abnormalities among the groups., Results: A total of 256 patients were included, with 206 (80.5%) females. The distribution of J-sign grade was as follows: 89 knees (34.8%) of low grade, 86 moderate (33.6%) and 81 high (31.6%). Among the five structural bone abnormalities, TD was the most common with a prevalence of 78.5%, followed by increased TT-TG at 47.4%. Excessive tibiofemoral rotation had the lowest occurrence at 28.9%. There were 173 (67.6%) patients who had two or more abnormalities, while 45 (17.6%) had four to five bony abnormalities. Among patients with any bony abnormality, the proportion of high-grade J-sign surpassed 40%. Patients with moderate and high-grade J-sign had more increased FAA and more pronounced patella alta (all p < 0.001). The proportion of excessive knee torsion and TD increased with increasing each J-sign grade, with the more notable tendency in knee torsion (high vs. moderate vs. low-grade: 61% vs. 22% vs 7%, p < 0.001). Furthermore, the higher J-sign grade was also associated with more combined bony abnormalities (p < 0.001). In the high-grade J-sign group, 90.2% of the knees had two or more bony risk factors and 40.7% had four or more, which were significantly higher than the moderate and low-grade J-sign groups (40.7% vs. 11.6% vs. 2.2%, p < 0.001)., Conclusion: In patients with a high-grade J-sign, over 90% of the lower limbs had two or more structural bone risk factors, and more than 40% had four or more. These proportions were significantly higher compared to knees with low-grade and moderate J-sign. In clinical practice, when treating high-grade patellar mal-tracking, it is important to focus on and correct these strongly correlated abnormal bone structures., Level of Evidence: Level III., (© 2024 European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

Purpose: When planning and delivering total knee arthroplasty (TKA), there are multiple coronal alignment strategies such as functional alignment (FA), kinematic alignment (KA), mechanical and adjusted mechanical alignment (MA, aMA). Recent three-dimensional and robotic-assisted surgery (RAS) studies have demonstrated that KA potentially better restores the trochlear anatomy than MA. The purpose of this study was to compare the restoration of the native trochlear orientation in patients undergoing RAS TKA using four different alignment strategies. It was hypothesised that FA would result in the lowest number of outliers., Methods: This is a prospective study of 200 patients undergoing RAS-TKA with a single implant. All patients were analysed for MA and KA prebalancing, and 157 patients received aMA and 43 patients FA with intraoperative balancing. Preoperative transverse computed tomography scans were used to determine the posterior condylar axis (PCA), lateral trochlear inclination (LTI) angle, sulcus angle (SA) and anterior trochlear line (ATL) angle. Implant measurements were obtained using a photographic analysis. Intraoperative software data combined with implant data and preoperative measurements were used to calculate the differences. Outliers were defined as ≥3° of alteration. Trochlea dysplasia was defined as LTI < 12°., Results: Native transepicondylar PCA had a median of 2°, LTI 18°, SA 137°, ATL 4°. LTI outliers were observed in 47%-60% of cases, with KA < FA < aMA < MA. For ATL, the range of outliers was 40.5%-85%, KA < FA < aMA < MA. SA produced 81% of outliers. Of all median angle values, only LTI when using KA was not significantly altered compared to the native knee., Conclusion: There is a significant alteration of trochlear orientation after TKA, regardless of the alignment strategy used. KA produced the lowest, but a substantial, number of outliers. The uniform design of implants causes the surgeon to compromise on balance in flexion versus trochlear position. The clinical relevance of this compromise requires further clinical investigations., Level of Evidence: Level II, prospective cohort study., (© 2024 The Authors. Knee Surgery, Sports Traumatology, Arthroscopy published by John Wiley & Sons Ltd on behalf of European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

Objectives: Growth and developmental studies have been a prominent theme in bioarchaeology. These works traditionally focus on metric measurements of long bone length and age-at-death or cross-sectional geometric studies with the use of computed tomography scans for questions on growth and mobility. However, teasing apart aspects of size and shape have been difficult due to the cylindrical nature of immature long bones. This research investigates the methodological use of surface geometries from linear measurements and geometric morphometric methods (GMM) to answer questions on mobility and allometry during childhood., Materials and Methods: Left femora were selected from 42 individuals ranging from fetal to 12 years of age from medieval St Gregory's Priory, Canterbury, UK. Femora were digitized with structured-light-scanning for auto3dgm analysis and measurements were obtained from physical caliper measurements. Individuals were put into age groups based on biomechanical milestones during this age range., Results: Ratio and GMM confirm hypotheses of allometry and biomechanical milestones. Geometric morphometrics, however, detects more subtle differences in mobility at each age group., Discussion: The findings of this preliminary study support the potential use of GMM of immature femora, while indicating that the extent in range of mobility that can occur varies at different biological milestones., (© 2024 Wiley Periodicals LLC.)

In this study, we investigated the discriminative capacity of knee morphology in automatic detection of osteophytes defined by the Osteoarthritis Research Society International atlas, using X-ray and magnetic resonance imaging (MRI) data. For the X-ray analysis, we developed a deep learning (DL) based model to segment femur and tibia. In case of MRIs, we utilized previously validated segmentations of femur, tibia, corresponding cartilage tissues, and menisci. Osteophyte detection was performed using DL models in four compartments: medial femur (FM), lateral femur (FL), medial tibia (TM), and lateral tibia (TL). To analyze the confounding effects of soft tissues, we investigated their morphology in combination with bones, including bones+cartilage, bones+menisci, and all the tissues. From X-ray-based 2D morphology, the models yielded balanced accuracy of 0.73, 0.69, 0.74, and 0.74 for FM, FL, TM, TL, respectively. Using 3D bone morphology from MRI, balanced accuracy was 0.80, 0.77, 0.71, and 0.76, respectively. The performance was higher than in 2D for all the compartments except for TM, with significant improvements observed for femoral compartments. Adding menisci or cartilage morphology consistently improved balanced accuracy in TM, with the greatest improvement seen for small osteophyte. Otherwise, the models performed similarly to bones-only. Our experiments demonstrated that MRI-based models show higher detection capability than X-ray based models for identifying knee osteophytes. This study highlighted the feasibility of automated osteophyte detection from X-ray and MRI data and suggested further need for development of osteophyte assessment criteria in addition to OARSI, particularly, for early osteophytic changes., (© 2024 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals LLC on behalf of Orthopaedic Research Society.)

Competing Interests: Declaration of competing interest None.

Background: Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs., Methods: A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions., Findings: The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor., Interpretation: Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Purpose: This study aims to compare the functional and radiological outcomes following both guided growth surgery (GGS) and acute corrective osteotomy (ACO) correction of angular deformities in children with rickets., Methods: A total of 8 and 7 children who had gradual GGS and ACO correction, respectively, for angular deformities due to rickets from 2002 to 2022 were recalled for follow-up. Demographic data, types of rickets, data on pharmacological treatment, biochemical parameters, recurrence of angular deformity and postoperative complications were obtained from the medical records. A radiographic evaluation of the leg was performed to determine the tibiofemoral angle. For functional evaluation, the Active Scale for Kids (ASK) and Lower Extremity Functional Scale (LEFS) instruments were used for children below and above 15 years old, respectively., Results: In terms of the tibiofemoral angle, the GGS group documented greater angle changes compared to the ACO group, but the difference was not significant. In terms of functional outcomes, the overall score percentage of both groups was comparable with the GGS group showing a trend of higher score percentage compared to the ACO group. The GGS group presented no complication while 2 neurovascular injuries and 1 implant failure were recorded in the ACO group., Conclusion: Both GGS and ACO procedures resulted in similar radiographic and functional outcomes for the treatment of rickets in children. GGS may be advantageous in terms of reducing complications of surgery. Nevertheless, the choice of surgical intervention should be made based on the patient's circumstances and the surgeon's preference., (© 2024. The Author(s), under exclusive licence to Springer-Verlag France SAS, part of Springer Nature.)

Objectives: Comparisons between Indigenous peoples over time and within a particular geographic region can shed light on the impact of environmental transitions on the skeleton, including relative bone strength, sexual dimorphism, and age-related changes. Here we compare long bone structural properties of the inhabitants of the late prehistoric-early historic Pecos Pueblo with those of present-day Indigenous individuals from New Mexico., Materials and Methods: Femora and tibiae of 126 adults from Pecos Pueblo and 226 present-day adults were included in the study. Cross-sectional diaphyseal properties-areas and second moments of area-were obtained from past studies of the Pecos Pueblo skeletal sample, and from computed tomography scans of recently deceased individuals in the present-day sample., Results: Femora and tibiae from Pecos individuals are stronger relative to body size than those of present-day Indigenous individuals. Present-day individuals are taller but not wider, and this body shape difference affects cross-sectional shape, more strongly proximally. The tibia shows anteroposterior strengthening among Pecos individuals, especially among males. Sexual dimorphism in midshaft bone shape is stronger within the Pecos Pueblo sample. With aging, Pecos individuals show more medullary expansion but also more subperiosteal expansion than present-day individuals, maintaining bone strength despite cortical thinning., Discussion: Higher activity levels, carried out over rough terrain and throughout adult life, likely explain the relatively stronger lower limb bones of the Pecos individuals, as well as their greater subperiosteal expansion with aging. Greater sexual dimorphism in bone structure among Pecos individuals potentially reflects greater gender-based differences in behavioral patterns., (© 2024 Wiley Periodicals LLC.)

Advancements in three-dimensional (3D) preoperative planning tools can offer surgeons and design engineers detailed feedback and additional opportunities for clinical advancements. The objective of this study is to use a 3D total hip arthroplasty preoperative planning tool to compare femoral component alignment for three different stem systems. The planning tool in this study used morphology data of femoral bones gathered from a CT database, seven from postoperative patients and 63 from statistical shape models (SSMs), to suggest specific implant sizes and optimal placements in 3D to match each specific bone model. Retrospective validations of predicted stem size and femoral version were first performed by comparing planner-chosen and surgeon-implanted stem sizes and version angles for the seven postoperative patients. Next, the alignment of three different stem systems was evaluated using bone models generated from SSMs, with a quantitative focus on component head positioning. In the validation study, the planner accurately selected stem size and orientation compared to the surgeon for all assessed subjects. In the stem evaluation, the three stem systems yielded different accuracies in component placement, with the newest stem system demonstrating the closest restoration of anatomical head center location. It is evident that new stem designs may have the potential for increased accuracy over their predecessors, demonstrating that new stem designs can offer improved intraoperative and postoperative alignment potential. The 3D preoperative planning tools can provide novel and reliable data to both surgeons and design engineers, which can ultimately improve clinical outcomes and future implant designs., (© 2024 Orthopaedic Research Society.)

Commercial straight metal plates have been generally used to fix fractured bones, but recently, the need for customized and helical metal plates has emerged. Customized metal plates are designed to fit the shape of the fracture area that is a 3D curved surface, making it more difficult than designing on a 2D plane. Helical plates are researched due to their advantage in avoiding blood vessel damage compared to commercially available straight metal plates. In this paper, we propose a novel algorithm to design a customized helical metal plate for the femur using cylindrical depth images and Boolean operations. We also present the results of 3D printing a metal plate designed using the proposed algorithm, and the shape matching is verified by calculating the minimum distance between the surface of the printed plate and the surface of the femur., Competing Interests: Declaration of Competing Interest None declared., (Copyright © 2024 IPEM. Published by Elsevier Ltd. All rights reserved.)

Introducion: The malimplantation of the total knee arthroplasty (TKA) components is one of the main reasons for revision surgery. For determining the correct intraoperative femoral rotation several anatomic rotational axes were described in order to achieve a parallel, balanced flexion gap. In this cadaveric study prevalent used rotational femoral axes and a navigated functional rotational axis were compared to the flexion-extension axis defined as the gold standard in rotation for femoral TKA component rotation., Materials and Methods: Thirteen body donors with knee osteoarthritis (mean age: 78.85 ± 6.09; eight females and five males) were examined. Rotational computer tomography was performed on their lower extremities pre- and postoperatively. Knee joint arthroplasties were implanted and CT diagnostics were used to compare the preoperatively determined flexion-extension axis (FEA). The FEA is the axis determined by our surgical technique and serves as an internal reference. It was compared to other axes such as (i) the anatomical transepicondylar axis (aTEA), (ii) the surgical transepicondylar axis (sTEA), (iii) the posterior condylar axis (PCA) and (iv) the functional rotation axis (fRA)., Results: Examination of 26 knee joint arthroplasties revealed a significant angular deviation (p *** < 0.0001) for all axes when the individual axes and FEA were compared. aTEA show mean angular deviation of 5.2° (± 4.5), sTEA was 2.7° (± 2.2), PCA 2.9° (± 2.3) and the deviation of fRA was 4.3° (± 2.7). A tendency towards external rotation was observed for the relative and maximum axis deviations of the aTEA to the FEA, for the sTEA and the fRA. However, the rotation of the posterior condylar axis was towards inwards., Conclusions: All axes showed a significant angular deviation from the FEA. We conclude that the presented technique achieves comparable results in terms of FEA reconstruction when compared with the use of the known surrogate axes, with certain deviations in terms of outliers in the internal or external rotation., (© 2024. The Author(s).)

One of the critical steps in total knee arthroplasty is femoral component positioning and sizing. Historically, there was wider variability between femoral component sizes, necessitating the concepts of anterior referencing (AR) and posterior referencing (PR). With the introduction of smaller increments between sizes, the concept of anatomic referencing has been introduced to replace AR and PR. The intent of this study was to validate the concept of anatomic referencing and show that with 2 mm increments in femoral sizes, the femoral component can be placed flush to the anterior cortex while maintaining posterior condylar offset (PCO). Digital surface models were created using 515 femurs from an established computed tomography database. Virtual bone resections, component sizing and placement were performed assuming neutral mechanical axis and a cartilage thickness of 2 mm. The appropriately sized femoral component, which had 2 mm incremental sizes, was placed flush with the anterior cortex with restoration of the PCO. The anterior-posterior distance from the posterior surface of the component to the medial and lateral surfaces of the posterior condylar cartilage were measured. The medial condyle was the limiting condyle in the majority of cases (73%). The average medial gap after appropriate femoral component matching was 0.6 mm (0.39-1.41 mm) across all sizes. The overall average condylar gap was 1.02 mm. The most common femoral component was a size 7 (57.2 mm) and the average femoral AP width was 55.9 mm. Anatomic referencing with an implant system that has 2-mm increments in femoral component sizing provides an alternative to AR and PR without compromise. Anatomic referencing allows for perfect alignment of the anterior flange of the femoral component to the anterior cortex of the femur while restoring the native PCO to within 1 mm. This avoids having to choose between AR or PR when in between femoral sizes., Competing Interests: J.B. reports being a board member of Orthopaedic Research Society. Stocks Zimmer Biomet. G.R.S. reports royalties from Zimmer Biomet. Consulting fee from Zimmer Biomet, 3M KCI, and Canary. Payment or honoraria from Zimmer Biomet and 3M KCI. Participation on a Advisory Board of Canary and Enhanced Medical Nutrition. Stocks of ROM Tech, KAT Robotics, and Enhanced Medical Nutrition., (Thieme. All rights reserved.)

Anticipating implant sizes before total knee arthroplasty (TKA) allows the surgical team to streamline operations and prepare for potential difficulties. This study aims to determine the correlation and derive a regression model for predicting TKA sizes using patient-specific demographics without using radiographs. We reviewed the demographics, including hand and foot sizes, of 1,339 primary TKAs. To allow for comparison across different TKA designs, we converted the femur and tibia sizes into their anteroposterior (AP) and mediolateral (ML) dimensions. Stepwise multivariate regressions were performed to analyze the data. Regarding the femur component, the patient's foot, gender, height, hand circumference, body mass index, and age was the significant demographic factors in the regression analysis (R-square 0.541, p  < 0.05). For the tibia component, the significant factors in the regression analysis were the patient's foot size, gender, height, hand circumference, and age (R-square 0.608, p  < 0.05). The patient's foot size had the highest correlation coefficient for both femur (0.670) and tibia (0.697) implant sizes ( p  < 0.05). We accurately predicted the femur component size exactly, within one and two sizes in 49.5, 94.2, and 99.9% of cases, respectively. Regarding the tibia, the prediction was exact, within one and two sizes in 53.0, 96.0, and 100% of cases, respectively. The regression model, utilizing patient-specific characteristics, such as foot size and hand circumference, accurately predicted TKA femur and tibia sizes within one component size. This provides a more efficient alternative for preoperative planning., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: T-score measurement via dual-energy X-ray absorptiometry (DXA) is the gold standard for assessing and classifying the bone mineral density status of patients as normal, osteopenic, or osteoporotic according to the World Health Organization criteria. However, the diagnostic accuracy may be affected by the skeletal site selected for DXA., Objectives: Estimate the prevalence of femoral and lumbar BMD discordance in a community-based setting in Riyadh, Saudi Arabia., Design: Cross-sectional., Setting: Polyclinics at a tertiary care center., Patients and Methods: This study included all patients aged ≥60 years who visited the Department of Family Medicine and underwent DXA screening between 2016 and 2022., Main Outcome Measures: Discordance was defined as a difference in BMD status between two skeletal sites. Minor discordance occurs when adjacent sites have different diagnoses; i.e., one site exhibits osteoporosis and the other exhibits osteopenia. In contrast, major discordance occurs when one site exhibits osteoporosis and the other exhibits normal BMD., Sample Size: 1429 older adults., Results: The study patients had a median age of 66 years (60-99, minimum-maximum). The prevalence of discordance was 41.6%, with major discordance present in 2.2% of patients and minor discordance in 39.4%. The distribution of discordance did not differ significantly among the sociodemographic factors., Conclusion: Discordance is prevalent among the Saudi geriatric population. During the analysis of DXA results, physicians should account for discordance when diagnosing and ruling out osteoporosis in high-risk patients., Limitations: All factors influencing discordance were not explored thoroughly; this study mainly focused on older adults. Furthermore, diverse age groups need to be investigated for a more comprehensive understanding of the analyzed factors.

Introduction: Avascular necrosis (AVN) is a rare progressive degenerative disease leading to bone and joint destruction. Patients often require surgical intervention. Femoral AVN is the most common anatomical location. Hyperbaric oxygen treatment (HBOT) has been shown to be effective in AVN. We present data collected from one centre over a 30-year period and compare the results with other published data., Methods: A retrospective chart review of all patients receiving HBOT for AVN at Fremantle and Fiona Stanley Hospitals since 1989 was performed. The primary outcome was radiological appearance using the Steinberg score, with secondary outcomes being subjective improvement, the need for joint replacement surgery and rates of complications., Results: Twenty-one joints in 14 patients (14 femoral heads and seven femoral condyles) were treated with HBOT since 1989. Two patients were excluded. Within the femoral head group, nine of the 14 joints (64%) had stable or improved magnetic resonance imaging (MRI) scans post treatment and at six months (minimum); 10 joints (71%) had good outcomes subjectively, three joints required surgical intervention, and three patients developed mild aural barotrauma. Within the femoral condyle group, all five joints had stable or improved post-treatment MRI scans (four had visible improvement in oedema and/or chondral stability), four joints reported good outcomes subjectively, none of the patients required surgical intervention (follow-up > six months)., Conclusions: This single centre retrospective study observed prevention of disease progression in femoral AVN with the use of HBOT, comparable to other published studies. This adds to the body of evidence that HBOT may have a significant role in the treatment of femoral AVN., Competing Interests: The authors report no conflicts of interest in this work., (Copyright: This article is the copyright of the authors who grant Diving and Hyperbaric Medicine a non-exclusive licence to publish the article in electronic and other forms.)

Bone Strain Index (BSI) is a new dual-energy x-ray absorptiometry (DXA)-based index. We retrospectively evaluated data from 153 postmenopausal women with a history of type 2 diabetes mellitus (T2DM). Lumbar spine and femoral Bone Strain Index (BSI) were sensitive to skeletal impairment in postmenopausal women suffering from T2DM., Purpose: Bone Strain Index (BSI) is a new dual-energy X-ray absorptiometry (DXA)-based measurement. We evaluated the performance of BSI in predicting the presence of fragility fractures in type 2 diabetes mellitus (T2DM) postmenopausal women., Methods: We retrospectively evaluated data from a case-control study of 153 postmenopausal women with a history of at least 5 years of T2DM (age from 40 to 90 years). For each subject, we assessed the personal or familiar history of previous fragility fractures and menopause age, and we collected data about bone mineral density (BMD), BSI, and Trabecular Bone Score (TBS) measurements. Statistical analysis was performed having as outcome the history of fragility fractures., Results: Out of a total of 153 subjects, n = 22 (14.4%) presented at least one major fragility fracture. A negative correlation was found between lumbar BSI and lumbar BMD (r =  - 0.49, p < 0.001) and between total femur BSI and total femur BMD (r =  - 0.49, p < 0.001). A negative correlation was found between femoral neck BSI and femoral neck BMD (r =  - 0.22, p < 0.001). Most DXA-based variables were individually able to discriminate between fractured and non-fractured subjects (p < 0.05), and lumbar BSI was the index with the most relative difference between the two populations, followed by femoral BSI., Conclusion: Lumbar spine and femoral BSI are sensitive to skeletal impairment in postmenopausal women suffering from T2DM. The use of BSI in conjunction with BMD and TBS can improve fracture risk assessment., (© 2024. The Author(s).)

This study aimed to determine differences in the hip abductor muscle activity during clam exercise at different hip flexion and femoral anteversion angles. Thirty healthy females were divided into two groups based on the femoral anteversion angle: the excessive femoral anteversion group and the normal group. Clam exercise was performed at three different hip flexion angles (60°, 45°, and 30°). Tensor fascia latae, gluteus medius, and superior portion of gluteus maximus activities were measured during the exercise, and the results were normalized to the activity during maximum voluntary isometric contraction to calculate the gluteal-to-tensor fascia latae muscle activation index. The superior portion of gluteus maximus activities at a hip flexion of 60° and 45° were greater than that at 30°. The excessive femoral anteversion group had a lower gluteal-to-tensor fascia latae muscle activation index than the normal group; the gluteal-to-tensor fascia latae muscle activation index for hip flexion at 60° was higher than that at 45°, and the gluteal-to-tensor fascia latae muscle activation index for hip flexion at 60° and 45° were higher than that at 30°. Therefore, the femoral anteversion angle and hip joint position were related to the activity of the hip abductor muscles during clam exercise. These findings may provide a rationale for instructing exercises to maximize the activity of the hip abductor muscles in individuals with an excessive femoral anteversion angle., Competing Interests: The authors declare no competing interests., (Copyright: © 2024 Mitomo et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: This study aimed to investigate the feasibility and precision of using a 3D-printed template for femoral tunnel placement in guiding the optimal positioning of the Internal anatomical stop and Low tension maintenance (IDEAL) bone tunnel during single-bundle anterior cruciate ligament (ACL) reconstruction., Methods: A retrospective analysis was conducted on 40 patients who underwent arthroscopic single-bundle ACL reconstruction at our hospital between April 2021 and November 2021. In the direct vision group, the IDEAL bone tunnel was positioned using radiofrequency localization directly visualized at the stump. In the 3D-printed positioning group, preoperative CT scans and Digital Imaging and Communications in Medicine (DICOM) data were employed. Following the Quadrant method by Bernard, the femoral tunnel's depth was set at 25% and its height at 29%. Postoperative plain CT scans enabled the reconstruction of 3D models for both groups. The accuracy of femoral tunnel placement was then compared., Results: The central locations of the bone tunnels in the direct vision group were at a mean depth of 25.74 ± 1.84% and a height of 29.22 ± 2.97%. In the 3D printing localization group, these values were 25.39 ± 2.98% for depth and 28.89 ± 2.50% for height, respectively. No significant differences were found in tunnel positioning between the groups. Both groups demonstrated statistically significant improvements in International Knee Documentation Committee Subjective Knee Form (IKDC) and Lysholm scores postoperatively, with no significant differences observed 12 months post-surgery., Conclusion: The findings of this study suggest that 3D printing-assisted arthroscopic IDEAL point femoral tunnel positioning and conventional arthroscopic positioning are feasible and effective for ACL reconstruction. Using 3D printing technology to design femoral anchor points in ACL reconstruction allows for the customization of anterior fork reconstruction and precise bone tunnel positioning, supporting the goal of individualized and accurate reconstruction., (© 2024. The Author(s).)

Orthopedic surgeons face a significant challenge in treating critical-size femoral defects (CSFD) caused by osteoporosis (OP), trauma, infection, or bone tumor resections. In this study for the first time, the application of photobiomodulation (PBM) and bone marrow mesenchymal stem cell-conditioned medium (BM-MSC-CM) to improve the osteogenic characteristics of mineralized bone scaffold (MBS) in ovariectomy-induced osteoporotic (OVX) rats with a CSFD was tested. Five groups of OVX rats with CSFD were created: (1) Control (C); (2) MBS; (3) MBS + CM; (4) MBS + PBM; (5) MBS + CM + PBM. Computed tomography scans (CT scans), compression indentation tests, and histological and stereological analyses were carried out after euthanasia at 12 weeks following implantation surgery. The CT scan results showed that CSFD in the MBS + CM, MBS + PBM, and MBS + CM + PBM groups was significantly smaller compared to the control group (p = 0.01, p = 0.04, and p = 0.000, respectively). Moreover, the CSFD size was substantially smaller in the MBS + CM + PBM treatment group than in the MBS, MBS + CM, and MBS + PBM treatment groups (p = 0.004, p = 0.04, and p = 0.01, respectively). The MBS + PBM and MBS + CM + PBM treatments had significantly increased maximum force relative to the control group (p = 0.01 and p = 0.03, respectively). Bending stiffness significantly increased in MBS (p = 0.006), MBS + CM, MBS + PBM, and MBS + CM + PBM treatments (all p = 0.004) relative to the control group. All treatment groups had considerably higher new trabecular bone volume (NTBV) than the control group (all, p = 0.004). Combined therapies with MBS + PBM and MBS + CM + PBM substantially increased the NTBV relative to the MBS group (all, p = 0.004). The MBS + CM + PBM treatment had a markedly higher NTBV than the MBS + PBM (p = 0.006) and MBS + CM (p = 0.004) treatments. MBS + CM + PBM, MBS + PBM, and MBS + CM treatments significantly accelerated bone regeneration of CSFD in OVX rats. PBM + CM enhanced the osteogenesis of the MBS compared to other treatment groups., (© 2024. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

Background: The treatment of infected bone defects remains a clinical challenge. With the development of three-dimensional printing technology, three-dimensional printed implants have been used for defect reconstruction. The aim of this study was to investigate the clinical outcomes of three-dimensional printed porous prosthesis in the treatment of femoral defects caused by osteomyelitis., Methods: Eleven patients with femoral bone defects following osteomyelitis who were treated with 3D-printed porous prosthesis at our institution between May 2017 and July 2021, were included. Eight patients were diagnosed with critical-sized defects, and the other three patients were diagnosed with shape-structural defects. A two-stage procedure was performed for all patients, and the infection was eradicated and bone defects were occupied by polymethylmethacrylate spacer during the first stage. The 3D-printed prosthesis was designed and used for the reconstruction of femoral defects in the second stage. Position of the reconstructed prostheses and bone growth were measured using radiography. The union rate, complications, and functional outcomes at the final follow-up were assessed., Results: The mean length of the bone defect was 14.0 cm, union was achieved in 10 (91%) patients. All patients showed good functional performance at the most recent follow-up. In the critical-sized defect group, one patient developed a deep infection that required additional procedures. Two patients had prosthetic dislocations. Radiography demonstrated good osseous integration of the implant-bone interface in 10 patients., Conclusion: The 3D printed prostheses enable rapid anatomical and mechanically stable reconstruction of extreme femur bone defects, effectively shortens treatment time, and achieves satisfactory clinical outcomes., (© 2024. The Author(s).)

Background and Objectives : To assess femoral shaft bowing (FSB) in coronal and sagittal planes and introduce the clinical implications of total knee arthroplasty (TKA) by analyzing a three-dimensional (3D) model with virtual implantation of the femoral component. Materials and Methods : Sixty-eight patients (average age: 69.1 years) underwent 3D model reconstruction of medullary canals using computed tomography (CT) data imported into Mimics ® software (version 21.0). A mechanical axis (MA) line was drawn from the midportion of the femoral head to the center of the intercondylar notch. Proximal/distal straight centerlines (length, 60 mm; diameter, 1 mm) were placed in the medullary canal's center. Acute angles between these centerlines were measured to assess lateral and anterior bowing. The acute angle between the distal centerline and MA line was measured for distal coronal and sagittal alignment in both anteroposterior (AP) and lateral views. The diameter of curve (DOC) along the posterior border of the medulla was measured. Results : The mean lateral bowing in the AP view was 3.71°, and the mean anterior bowing in the lateral view was 11.82°. The average DOC of the medullary canal was 1501.68 mm. The average distal coronal alignment of all femurs was 6.40°, while the distal sagittal alignment was 2.66°. Overall, 22 femurs had coronal bowing, 42 had sagittal bowing, and 15 had both. Conclusions : In Asian populations, FSB can occur in coronal, sagittal, or both planes. Increased anterolateral FSB may lead to cortical abutment in the sagittal plane, despite limited space in the coronal plane. During TKA, distal coronal alignment guides the distal femoral valgus cut angle, whereas distal sagittal alignment aids in predicting femoral component positioning to avoid anterior notching. However, osteotomies along the anterior cortical bone intended to prevent notching may result in outliers due to differences between the distal sagittal alignment and the distal anterior cortical axis.

Objective: The thickness of the lateral femoral wall, which is an important indicator for evaluating the stability and integrity of intertrochanteric fractures, has been widely studied in recent years. However, as a typical representative of internal fixation treatment, there are few reports on the biomechanical comparison between PFNA and DHS + CS. This study focused primarily on the biomechanical effects of different lateral femoral wall thicknesses on two types of internal fixation through finite element analysis., Methods: We randomly recruited a healthy adult and collected his femoral CT data to establish a model of femoral intertrochanteric fracture with different lateral femoral wall thicknesses. Following PFNA and DHS + CS fixation, femoral models were simulated, and variations in stress and displacement of the internal fixation and femoral head were recorded under the same physiological load., Results: First, finite element mechanical analysis revealed that the stress and displacement of the internal fixation and femoral head were lower in the femoral model after PFNA fixation than in the DHS + CS model. Second, as the outer wall thickness decreased, the stress and deformation endured by both types of internal fixation gradually increased., Conclusions: Finite element analysis determined that PFNA exhibits significantly better biomechanical stability than DHS + CS when subjected to varying lateral femoral wall thicknesses. Moreover, lateral femoral wall thickness substantially affects the stability of the two internal fixation biomechanical environments. When the thickness of the lateral femoral wall is too small, we do not recommend using extramedullary fixation because there is a significant risk of internal fixation fracture., (© 2024. The Author(s).)

Introduction: Although there has been abundant evidence of the association between dyslipidemia as a single factor and osteoporosis, the non-linear relationship between osteoporosis and the Atherogenic Index of Plasma (AIP) has not yet been thoroughly investigated. This study aimed to investigate the complex relationship between AIP and bone mineral density (BMD) to elucidate their interrelationship., Methods: An analysis of 2007-2018 National Health and Nutrition Survey (NHANES) data was conducted for this study. The study enrolled 5,019 participants. Logarithmically multiplying triglycerides and high-density lipoprotein cholesterol yields the AIP (base 10). The measured variables consisted of BMD in the total femur (TF), femoral neck (FN), and lumbar spine (LS). The association between AIP and BMD was examined using a range of statistical models, such as weighted multivariable logistic regression, generalized additive model, etc. RESULTS: It was found that AIP was positively associated with BMD after adjusting for age, gender, race, socioeconomic status, degree of education, income, Consuming alcoholic beverages, osteoporosis status (Yes or No), ALT, AST, serum creatinine, and total calcium levels. Further studies supported the association link between elevated BMD and AIP. Furthermore, compared to men, females had a higher positive connection between AIP and BMD. In general, there was a curve in the reverse L-shape seen, with a point of change around 0.877, indicating a relationship between AIP and TF BMD. Moreover, a curve exhibiting an L-formed pattern, with a point of inflection at around 0.702, was seen between AIP and FN BMD. In addition, a J-shaped curve was seen, with a point of inflection at 0.092, which demonstrates the association between AIP and LS BMD., Conclusion: The AIP and TF BMD curves resemble inverted L shapes, as do the AIP and FN BMD curves. The relationship between AIP and LS BMD was further demonstrated by a J-shaped curve. The results indicate a possible association between AIP and bone mineral density, which should be explored in more detail., (© 2024. The Author(s).)

Background: Both osteoporosis and sarcopenia are associated with aging, increasing the likelihood of falls in older adults and consequently raising the risk of hip fractures (HF)., Aims: To explore the relationship between the size and density of muscle and subcutaneous adipose tissue (SAT) and the bone mineral density (BMD) of the proximal femur in elderly women with HF., Methods: Quantitative computed tomography (QCT) was conducted on the hips of 661 female participants who experienced low-energy acute HFs to measure both areal BMD (aBMD) and volume BMD (vBMD). Measurements were taken for the cross-sectional area (CSA) and density of the muscle around the hip and adjacent SAT. Multivariable linear regression models were applied to assess the relationship between these parameters., Results: Most increases in the density of the gluteus medius and minimus muscle (G.Med/MinM) were correlated with higher BMD in the femoral neck fracture (FNF) group with osteoporosis. In the FNF group, gluteus maximus muscle (G.MaxM) density was negatively associated with the BMD parameters of the proximal femur in individuals with osteoporosis, while they were positively associated with nonosteoporosis. In the intertrochanteric fracture (ITF) group without osteoporosis, both FN aBMD and FN vBMD showed significant correlations with G.Med/MinM density., Discussion: In women with HFs, bone and muscle are closely related., Conclusions: In older women with HFs, density but not CSA of the G.Med/MinM were associated with BMD parameters of the proximal femur. Osteoporosis may influence the relationship between G.MaxM density and proximal femur BMD in elderly women with FNF., (© 2024. The Author(s).)

Immunodeficient murine models are usually used as the preclinical models of osteosarcoma. Such models do not effectively simulate the process of tumorigenesis and metastasis. Establishing a suitable animal model for understanding the mechanism of osteosarcoma and the clinical translation is indispensable. The UMR-106 cell suspension was injected into the marrow cavity of Balb/C nude mice. Tumor masses were harvested from nude mice and sectioned. The tumor fragments were transplanted into the marrow cavities of SD rats immunosuppressed with cyclosporine A. Through muti-rounds selection in SD rats, we constructed orthotopic osteosarcoma animal models using rats with intact immune systems. The primary tumor cells were cultured in-vitro to obtain the immune-tolerant cell line. VX2 tumor fragments were transplanted into the distal femur and parosteal radius of New Zealand white rabbit to construct orthotopic osteosarcoma animal models in rabbits. The rate of tumor formation in SD rats (P1 generation) was 30%. After four rounds of selection and six rounds of acclimatization in SD rats with intact immune systems, we obtained immune-tolerant cell lines and established the orthotopic osteosarcoma model of the distal femur in SD rats. Micro-CT images confirmed tumor-driven osteolysis and the bone destruction process. Moreover, the orthotopic model was also established in New Zealand white rabbits by implanting VX2 tumor fragments into rabbit radii and femurs. We constructed orthotopic osteosarcoma animal models in rats with intact immune systems through muti-rounds in-vivo selection and the rabbit osteosarcoma model., (© 2024. The Author(s).)

Many patients who cannot squat well in a neutral toe position can only squat in an excessively out-toeing position. This excessive out-toeing squat is thought to be caused by rotational problems of the lower extremities. In this study, we aimed to identify the cause for the inability to squat by measuring and comparing femoral and tibial torsion between an excessive out-toeing squat patient group and a control group representing the general population. Between 2008 and 2022, a patient group comprising 50 lower extremities with excessive out-toeing squats was established. A control group representing the general population was selected from patients aged 0 to 29 years, who underwent lower-extremity CT angiography between 2012 and 2022, using the Clinical Data Warehouse with exclusion criteria applied. A total of 94 lower extremities were included in the control group. The femoral torsional angle (FTA) and tibial torsional angle (TTA) of both groups were measured and compared using Student t test. Additionally, 30 each of those with the highest and lowest 30 FTA values were selected from the patient and control groups, and the TTA was compared between the high- and low-FTA groups using Student t test. The mean FTA was 0.34° (SD, 11.11°) in the patient group and 10.14° (SD, 11.85°) in the control group, with a mean difference of 9.8° and P < .001. The mean TTA was 27.95° (SD, 7.82°) in the patient group and 32.67 ° (SD, 7.58°) in the control group, with a mean difference of 4.72° (P = .001). The mean TTA was 34.3° (SD, 7.72°) in the high-FTA group and 28.17° (SD, 8.35°) in the low-FTA group, with a mean difference of 6.13° (P = .005). Patients with excessive out-toeing squat showed lower FTA and TTA values than the general population. Furthermore, although a correlation between FTA and TTA was not established through Pearson correlation analysis, a tendency was observed where a decrease in FTA was associated with a decrease in TTA. Based on these results, decreased FTA was demonstrated to be one of the major causes of excessive out-toeing squats., Competing Interests: Each author certifies that there are no commercial associations (consultancies, stock ownership, equity interest, patent/licensing arrangements, etc.) that might pose a conflict of interest in connection with the submitted article related to the author or any immediate family members., (Copyright © 2024 the Author(s). Published by Wolters Kluwer Health, Inc.)

A third gravida with osteogenesis imperfecta (OI) type 1, in her 20s, was referred from the Medical Genetics department at 12+ weeks with a prenatal diagnosis of OI type 1 in this fetus for further management. She was wheelchair-bound and keen to continue this pregnancy. She had medical termination in her two previous pregnancies for OI in the fetuses. Ultrasound at 12+ weeks revealed a short-bent femur with sparing of the long bones of the upper limb. Serial ultrasound revealed progressive affliction of the long bones with falling growth profile and polyhydramnios. She was delivered at 36 weeks by caesarean for breech in labour under regional anaesthesia.A multidisciplinary approach, patient determination, and good partner support helped in the successful management of this pregnancy.The neonate had blue sclera, dentigerous imperfecta, bowing of the femur and relatively spared upper limbs. Growth was on the third centile. The mother says she brings the girl for follow-up every 3-6 months to give injection zoledronate. The mother confirms her girl can stand with support, crawl, and speak two-syllable words. Her daughter had to undergo femur corrective osteotomy rush nailing and hip spice application for a closed fracture of the left femur., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2024. No commercial re-use. See rights and permissions. Published by BMJ.)

Background: Osseointegration is essential for the long-term survival of cementless femoral stems and is dependent on periprosthetic bone quality and correct implantation technique. The aim of this study was to evaluate the 3-dimensional long-term fixation patterns of, and bone microarchitecture around, cementless hip stems., Methods: Four specimens with varying degrees of bone quality and fixation characteristics from body donors who had received Alloclassic Zweymüller hip stems during their lifetime (mean time in situ at the time of death: 12.73 years) were evaluated with use of radiographs, high-resolution computed tomography (CT) scans, and hard-tissue histology. The CT voxel size was 85 µm, and the following parameters were calculated: total bone volume, total bone volume fraction, trabecular bone volume, trabecular bone volume fraction, cortical bone volume, cortical bone volume fraction, and cortical thickness. Bone-implant contact and canal fill index values for each Gruen zone of the specimens were calculated with use of histological samples., Results: Femoral stems with apparently good cortical contact on clinical radiographs showed higher values for cortical bone volume, trabecular bone volume, and cortical thickness in the high-resolution CT analysis than femoral stems with apparently weak cortical contact on clinical radiographs. Based on the histological evaluation, the mean bone-implant contact ranged from 22.94% to 57.24% and the mean canal fill index ranged from 52.33% to 69.67% among the specimens., Conclusions: This study demonstrated different osseointegration patterns of cementless femoral stems on the basis of radiographs, high-resolution CT scans, and histological evaluation. Femora with high cortical bone volume and cortical thickness were associated with higher canal fill indices, whereas femora with low cortical bone volume and cortical thickness had lower canal fill indices and showed a characteristic corner-anchorage pattern., Clinical Relevance: Osseointegration patterns and thus the long-term survival of cementless femoral stems are dependent on cortical bone volume and cortical thickness., Competing Interests: Disclosure: Part of this work was supported by the project entitled “TIMed 2022++ - Technological Innovation in Medicine 2022++”, which is funded by the Regional Government of Upper Austria. The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H947 )., (Copyright © 2024 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: Although high-energy trauma mechanisms are generally considered to cause traumatic posterior hip dislocations, femoroacetabular variations are assumed to contribute to low-impact hip dislocations. Thus, the present study aimed to identify morphologic femoral and acetabular risk factors that may also contribute to posterior hip dislocations in high-energy trauma mechanisms., Methods: The acetabular and femoral morphology of 83 hips with a traumatic posterior dislocation following a high-energy trauma mechanism were analyzed and matched to a control group of 83 patients who sustained high-energy trauma without a hip injury. The lateral center-edge angle, acetabular index, acetabular depth/width ratio, cranial and central acetabular version angles, and the anterior and posterior acetabular sector angles were measured on computed tomography to quantify femoroacetabular impingement (FAI) morphology, acetabular version, and coverage. The caput-collum-diaphyseal angle and the alpha angles in the coronal and axial planes were measured to detect cam-type FAI deformity. A receiver operating characteristic curve was utilized to determine threshold values for an increased risk of hip dislocation., Results: Acetabular retroversion and posterior acetabular undercoverage were significantly increased in patients with hip dislocations compared with controls (p < 0.001). The central acetabular version angle and posterior acetabular sector angle that indicated an increased risk of hip dislocation were ≤9° and ≤90°, respectively. Cam-type FAI deformity and coxa valga were significantly increased in the dislocation group (p < 0.001). The anterolateral alpha angle that indicated an increased dislocation risk was ≥47°., Conclusions: Acetabular retroversion, posterior acetabular undercoverage, and cam-type FAI morphology may be risk factors contributing to traumatic posterior hip dislocation in high-energy trauma mechanisms., Level of Evidence: Prognostic Level III . See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: No external funding was received for this work. The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article ( http://links.lww.com/JBJS/H953 )., (Copyright © 2024 by The Journal of Bone and Joint Surgery, Incorporated.)

Objective: This study aimed to document the radiographic appearance of the femoral nutrient foramina and the variation of this in dogs undergoing total hip replacement (THR). Our hypothesis was that the radiographic appearance of the foramen would be consistent with the previously described anatomy, with some variations., Animals: 89 client-owned dogs., Methods: Preoperative radiographs were retrospectively analyzed for dogs undergoing THR at a single referral center. The signalment of all dogs was recorded. Radiographs were retrospectively examined to describe the number, direction, appearance, and foraminal index of the femoral nutrient foramen., Results: Radiographs of 89 dogs and 102 femurs were examined. In 73 cases, a single foramen was seen; in 19 cases, no foramen was visible; and in 10 cases, 2 foramina were visible. The median foraminal index was 33.1% (range, 26% to 55.3%). On the mediolateral view, 72 were of proximocaudal-to-distocranial orientation, 19 were proximocranial to distocaudal, and 1 was atypical. On the craniocaudal or ventrodorsal views, the foramen was seen as a focal round radiolucency in 65 cases, was curved or atypical in 13 cases, and was not visible in 14., Clinical Relevance: Radiolucent lines across the cortices that do not fit these criteria should raise suspicion of a femoral fissure, particularly within the context of THR.

This study aimed to investigate the effect of diabetes on radiation attenuation parameters of the femur and tibia of rats using Monte Carlo Simulations. First, control and diabetic rats were identified and tibias and femurs were removed. Then, the elemental ratios of the bones obtained were calculated using EDS (Energy Dissipative X-ray Spectroscopy). Therefore, radiation permeability properties of control and diabetic bones were simulated by using the content ratios in the bones in MCNP6 (Monte Carlo N-Particle) and PHITS (Particle and Heavy Ion Transport code System) 3.22 and Stopping and Range of Ions in Matter (SRIM) simulation codes. Attenuation coefficient results were compared with the NIST database via XCOM. Although differences in absorption coefficients are observed at low energies, these differences disappear as the energy increases., Competing Interests: Declaration of competing interest ■ The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objectives: Patellofemoral instability (PFI) has multiple predisposing anatomic factors, including ligamentous hyperlaxity, coronal and axial malalignment, patella alta, trochlea dysplasia, excessive lateral patellar tilt, and excessive lateral Q vector. Yet, few studies have analyzed surgical thresholds for performing axial alignment corrective osteotomies in the treatment of PFI and patella maltracking. The objective of this systematic literature review was to determine if there is a threshold for axial plane alignment that triggers surgical correction for the treatment of patellar instability in the published literature., Methods: Using a predetermined search strategy, a systematic literature search of 10 major databases and gray literature resources was completed. Only studies reporting on patellar instability and outcomes were included. Radiologic indications, additional procedures, outcomes, and complications were reported. Titles and abstracts were screened, and full-text manuscripts were then selected and extracted. Variables related to radiographic and clinical parameters, patient demographics, surgery performed, surgical correction, complications, and reoperations were recorded preoperatively and postoperatively., Results: A total of 1132 abstracts and titles were screened by two reviewers, yielding 15 eligible studies. The reported threshold identified in our study for axial plane alignment that triggers surgical correction in most of the published literature when discussing PFI was either tibial torsion greater than 30° and/or femoral anteversion greater than 25°. Following rotational osteotomy of one or both long bones, one study (7%) reported improvements in tubercle-sulcus angle, two studies (13%) reported improvements in femoral-tibial angle, and four studies (27%) reported decreases in tibial torsion. For patient-reported outcomes, seven studies (47%) reported improvement in the Kujala score, five studies (33%) reported postoperative improvement in Lysholm, and four studies (27%) reported improvement in the International Knee Documentation Committee (IKDC) score. Nine studies (60%) reported preoperative femoral anteversion; however, only two studies compared pre- and post-operative values (one study reported a decrease in anteversion and another study reported an increase in anteversion)., Conclusion: When treating PFI, the reported threshold for axial plane alignment that triggers surgical correction in most of the published literature was tibial torsion greater than 30° and/or femoral anteversion greater than 25° as measured by CT. However, there is no consensus on the axial alignment measurement technique., Level of Evidence: III., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)