Search

Olfaction plays a dominant role in the mate-finding and host selection behaviours of the codling moth (Cydia pomonella), an important pest of apple, pear and walnut orchards worldwide. Antennal transcriptome analysis revealed a number of abundantly expressed genes related to the moth olfactory system, including those encoding the olfactory receptors (ORs) CpomOR1, CpomOR3 and CpomOR6a, which belong to the pheromone receptor (PR) lineage, and the co-receptor (CpomOrco). Using heterologous expression, in both Drosophila olfactory sensory neurones and in human embryonic kidney cells, together with electrophysiological recordings and calcium imaging, we characterize the basic physiological and pharmacological properties of these receptors and demonstrate that they form functional ionotropic receptor channels. Both the homomeric CpomOrco and heteromeric CpomOrco + OR complexes can be activated by the common Orco agonists VUAA1 and VUAA3, as well as inhibited by the common Orco antagonists amiloride derivatives. CpomOR3 responds to the plant volatile compound pear ester ethyl-(E,Z)-2,4-decadienoate, while CpomOR6a responds to the strong pheromone antagonist codlemone acetate (E,E)-8,10-dodecadien-1-yl acetate. These findings represent important breakthroughs in the deorphanization of codling moth pheromone receptors, as well as more broadly into insect ecology and evolution and, consequently, for the development of sustainable pest control strategies based on manipulating chemosensory communication.

Canastra cheese is a cheese with geographical indication recognized by the Brazilian National Institute of Industrial Protection under number IG201002. It is produced in seven municipalities in the state of Minas Gerais in a region called Serra da Canastra. In thiswork, samples of milk, “pingo” (natural starter),whey and Canastra cheese were collected on a farm inMedeiros-MG/Brazil to evaluate the yeast microbiota and select yeasts for whey fermentation to produce ethanol and volatile aromatic compounds of relevance in the production of cheese. Thirtynine isolates capable of fermenting lactose in a synthetic medium were identified by MALDI-TOF as Kluyveromyces lactis (29), Torulaspora delbrueckii (7) and Candida intermedia (3). Eleven isolates of K. lactis and three of T. delbrueckii efficiently fermented lactose until 4th day, and due to this reason were selected for cheese whey fermentation with Brix 12, 14 and 18. Generally, the isolates T. delbrueckii B14, B35, and B20 and K. lactis B10 were the most effective regardless of the initial Brix value. The identification of these four isolates by MALDI TOF was confirmed by sequencing of the ITS region. In the fermentation of cheese whey 14 Brix, T. delbrueckii B14 and B35, respectively yielded 24.06 g/L and 16.45 g/L of ethanol, while K. lactis B10 was more efficient in the consumption of lactose. In sequential culture with K. lactis B10 inoculated 48 h after T. delbrueckii B14, 97.82% of the total sugars were consumed resulting in the production of 19.81 g/L ethanol and 39 aromatic volatile compounds. The most abundant compounds were 3-methyl-1-butanol, octanoic acid and ethyl decanoate, which are reported as important for the aroma and flavor of cheeses. Based in our results, B10 isolate inoculated 48 h after B14 isolate is a promising yeast inoculum to be used for fermentation of dairy substrates., The authors thank CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico do Brasil), CAPES (Coordenação de Aperfeiçoamento de Pessoal de Nível Superior) and FAPEMIG (Fundação de Amparo à Pesquisa do Estado de Minas Gerais) for financial support. The authors also thank J.C Amorim for her help in MALDI TOF analysis and Dr. P.S Geraldino for her help in sequences analysis.

Pseudomonas strains produce rhamnolipid mixtures (RLs) that generally consist of one or two molecules of rhamnose linked to one or two molecules of 3-hydroxyalkanoic acid. This study evaluates carbon source effects (glycerol, glucose, myristic acid, and Brassica carinata oil) on the synthesis of monorhamnolipids (mono-RLs) versus dirhamnolipids (di-RLs) in a human isolate of Pseudomonas aeruginosa PAL05. Spectrophotometry, an emulsifying index (E24) test, and an orcinol assay confirmed the production of RLs by PAL05. Purified RLs were characterized by H-1 NMR analysis. PAL05 primarily produces mono-RLs when provided carbon sources containing long chain fatty acids (FAs) (myristic acid and B. carinata oil) and di-RLs when provided glycerol or glucose. qRT-PCR analysis showed that delayed expression of rhlC occurred when B. carinata oil was used, but not glycerol, glucose, or myristic acid. Our data show that the carbon source influenced the transcriptional expression of the rhlC gene and, consequently, the predominance of mono-RLs or di-RLs in PAL05 cultures. (C) 2017 Published by Elsevier B.V.

To characterize the sedative and hypnotic profile of the novel adenosine derivative ((3S,4R,5R)-3,4-dihydroxy-5-(6-((4-hydroxy-3-methoxybenzyl)amino)-9H-purin-9-yl)tetrahydrofuran-2-yl) methyl diaconate (WS0701), we performed a variety of behavioural tests and investigated the influence of WS0701 on various sleep stages. In mice, WS0701 significantly increased the number of entries and time spent in open arms in the elevated plus maze test, indicating an anxiolytic effect. WS0701 decreased locomotor activity counts and head dips in the hole-board test and enhanced sodium pentobarbital-induced hypnosis. However, WS0701 did not induce the loss of the righting reflex or amnesic effects in behavioural models. In rats, WS0701 exerted a sedative effect and markedly prolonged the time spent in non-rapid-eye-movement sleep, especially slow-wave sleep, but reduced the time spent in rapid-eye-movement sleep (REMS). Pretreatment with the selective adenosine A2a receptor antagonist SCH58261 attenuated the sedative and hypnotic effects of WS0701. WS0701 did not protect mice against picrotoxin-induced seizures, but inhibited adenosine deaminase activity and increased adenosine levels in the frontal cortex and hypothalamus of mice. In conclusion, WS0701 shows anxiolytic, sedative as well as sleep stage alterative effects, which may be related to the adenosine system.

A mathematically based fed-batch bioprocess demonstrated the suitability of using a relatively cheap and renewable substrate (butyric acid) for Pseudomonas putida CA-3 high cell density cultivation. Butyric acid fine-tuned addition is critical to extend the fermentation run and avoid oxygen consumption while maximising the biomass volumetric productivity. A conservative submaximal growth rate (μ of 0.25 h(-1)) achieved 71.3 g L(-1) of biomass after 42 h of fed-batch growth. When a more ambitious feed rate was supplied in order to match a μ of 0.35 h(-1), the volumetric productivity was increased to 2.0 g L(-1) h(-1), corresponding to a run of 25 h and 50 g L(-1) of biomass. Both results represent the highest biomass and the best biomass volumetric productivity with butyrate as a sole carbon source. However, medium chain length polyhydroxyalkanoate (mcl-PHA) accumulation with butyrate grown cells is low (4 %). To achieve a higher mcl-PHA volumetric productivity, decanoate was supplied to butyrate grown cells. This strategy resulted in a PHA volumetric productivity of 4.57 g L(-1) h(-1) in the PHA production phase and 1.63 g L(-1) h(-1)over the lifetime of the fermentation, with a maximum mcl-PHA accumulation of 65 % of the cell dry weight.

It is shown by rational site-directed mutagenesis of the lid region in Thermomyces lanuginosus lipase that it is possible to generate lipase variants with attractive features, e.g., high lipase activity, fast activation at the lipid interface, ability to act on water-soluble substrates, and enhanced calcium independence. The rational design was based on the lid residue composition in Aspergillus niger ferulic acid esterase (FAEA). Five constructs included lipase variants containing the full FAEA lid, a FAEA-like lid, an intermediate lid of FAEA and TlL character, and the entire lid region from Aspergillus terreus lipase (AtL). To investigate an altered activation mechanism for each variant compared to that of TlL, a combination of activity- and spectroscopic-based measurements were applied. The engineered variant with a lid from AtL displayed interfacial activation comparable to that of TlL, whereas variants with FAEA lid character showed interfacial activation independence with pronounced activity toward pNP-acetate and pNP-butyrate below the critical micelle concentration. For variants with lipase and esterase character, lipase activity measurements further indicated a faster activation at the lipid interface. Relative to their activity toward pNP-ester substrates in calcium-rich buffer, all lid variants retained between 15 and 100% activity in buffer containing 5 mM EDTA whereas TlL activity was reduced to less than 2%, demonstrating the lid's central role in governing calcium dependency. For FAEA-like lid variants, accessible hydrophobic surface area measurements showed an approximate 10-fold increase in the level of binding of extrinsic fluorophores to the protein surface relative to that of TlL accompanied by a blue shift in emission indicative of an open lid in aqueous solution. Together, these studies report on the successful alteration of the activation mechanism in TlL by rational design creating novel lipases with new, intriguing functionalities.

Cardiovascular diseases, especially myocardial infarction, are the leading cause of morbidity and mortality in the world, also resulting in huge economic burdens on national economies. A cardiac patch strategy aims at regenerating an infarcted heart by providing healthy functional cells to the injured region via a carrier substrate, and providing mechanical support, thereby preventing deleterious ventricular remodeling. In the present work, polyaniline (PANI) was doped with camphorsulfonic acid and blended with poly(glycerol-sebacate) at ratios of 10, 20 and 30 vol.% PANI content to produce electrically conductive composite cardiac patches via the solvent casting method. The composites were characterized in terms of their electrical, mechanical and physicochemical properties. The in vitro biodegradability of the composites was also evaluated. Electrical conductivity increased from 0 S cm−1 for pure PGS to 0.018 S cm−1 for 30 vol.% PANI–PGS samples. Moreover, the conductivities were preserved for at least 100 h post fabrication. Tensile tests revealed an improvement in the elastic modulus, tensile strength and elasticity with increasing PANI content. The degradation products caused a local drop in pH, which was higher in all composite samples compared with pure PGS, hinting at a buffering effect due to the presence of PANI. Finally, the cytocompatibility of the composites was confirmed when C2C12 cells attached and proliferated on samples with varying PANI content. Furthermore, leaching of acid dopants from the developed composites did not have any deleterious effect on the viability of C2C12 cells. Taken together, these results confirm the potential of PANI–PGS composites for use as substrates to modulate cellular behavior via electrical stimulation, and as biocompatible scaffolds for cardiac tissue engineering applications.

The repair of critical-sized defects (CSDs) is a significant challenge in bone tissue engineering. Combining the use of progenitor cells with gene therapy represents a promising approach for bone regeneration. MicroRNAs play important roles in most gene regulatory networks, regulate the endogenous expression of multiple growth factors and simultaneously modulate stem cell differentiation. Our previous study showed that knocking down miR-31 promotes the osteogenesis of bone marrow stromal stem cells (BMSCs). To investigate the therapeutic potential of cells engineered to express anti-miR-31 for CSD repair, lentiviral vectors encoding negative control, miR-31 precursor and anti-sense sequences were constructed and transduced into osteo-inductive BMSCs. The expression of osteogenic-specific genes, alkaline phosphatase activity and Alizarin Red S staining were investigated to evaluate the effects of miR-31 on the cell fate of BMSCs over a 3-week period. In addition, miR-31-modified BMSCs seeded on poly(glycerol sebacate) (PGS) scaffolds were used to repair 8 mm critical-sized calvarial defects in rats. The results showed that miR-31 suppression significantly increased the expression of osteogenic-specific genes in vitro at the mRNA and protein levels, and that robust new bone formation with high local bone mineral density was observed in the anti-miR groups in vivo. Moreover, the PGS scaffolds carrying anti-miR-31-expressing BMSCs exhibited good biocompatibility and a high regeneration rate (~60 %) within in vivo bone defects. Our results suggest that miR-31 gene delivery affects the potential of BMSCs for osteogenic differentiation and bone regeneration and that PGS is a potential substrate for genetically modified, tissue-engineered bone in the repair of large bone defects.

Aim: An injectable, photocrosslinkable nanocomposite was prepared using a fumarate derivative of poly(glycerol sebacate) and nanohydroxyapatite. Materials & methods: Polymers with varying physical and mechanical properties were synthesized. Furthermore, nanocomposites were developed using a homogenization process by combining nanohydroxyapatite within poly(glycerol sebacate) matrix via photocrosslinking and evaluated both in vitro and in vivo. Results & discussion: The nanocomposites were injectable, highly bioactive and biocompatible. Addition of nanohydroxyapatite led to enhanced mechanical properties with an ultimate strength of 8 MPa. The optimized nanocomposite showed good in vitro cell attachment, proliferation and differentiation of rat bone marrow-derived mesenchymal stem cells. The in vivo evaluation in a rat calvarial bone defect model showed significantly high alkaline phosphatase activity and bone regeneration. Conclusion: This injectable, biocompatible and bioactive in situ hardening composite graft was found to be suitable for load-bearing bone regeneration applications using minimally invasive surgery. Original submitted 17 April 2012; Revised submitted 26 October 2012; Published online 5 February 2013

In this study biomimetic poly(glycerol sebacate) PGS matrix was developed for cardiac patch application. The rationale was that such matrices would provide conducive environment for the seeded cells at the interphase with PGS. From the microstructural standpoint, PGS was fabricated into dense films and porous PGS scaffolds. From the biological aspect, biomimetic PGS membranes were developed via covalently binding peptides Tyr-Ile-Gly-Ser-Arg (YIGSR) and Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP), corresponding to the epitope sequences of laminin and fibronectin, respectively onto the surface. To improve and enhance homogenous binding of peptides onto the PGS surface, chemical modification of its surface was carried out. A sequential regime of alkaline hydrolysis with 0.01 M NaOH for 5 min and acidification with 0.01 M HCl for 25 s was optimal. More COOH chemical group was exposed without causing deleterious effect on the bulk properties of the polymer as revealed by the physicochemical analysis carried out. HPLC analysis, chemical imaging and ToF-SIMS were able to establish the successful homogenous functionalization of PGS membranes with the peptides. Finally, the developed biomimetic membranes supported the adhesion and growth of rat and human cardiac progenitor cells.

An efficient delivery system is critical for the success of cell therapy. To deliver cells to a dynamic organ, the biomaterial vehicle should mechanically match with the non-linearly elastic host tissue. In this study, non-linearly elastic biomaterials have been fabricated from a chemically crosslinked elastomeric poly(glycerol sebacate) (PGS) and thermoplastic poly(l-lactic acid) (PLLA) using the core/shell electrospinning technique. The spun fibrous materials containing a PGS core and PLLA shell demonstrate J-shaped stress–strain curves, having ultimate tensile strength (UTS), rupture elongation and stiffness constants of 1 ± 0.2 MPa, 25 ± 3% and 12 ± 2, respectively, which are comparable to skin tissue properties reported previously. Our ex vivo and in vivo trials have shown that the elastomeric mesh supports and fosters the growth of enteric neural crest (ENC) progenitor cells, and that the cell-seeded elastomeric fibrous sheet physically remains in intimate contact with guts after grafting, providing the effective delivery of the progenitor cells to an embryonic and post-natal gut environment.

Background Heart failure due to myocardial infarction remains the leading cause of death worldwide owing to the inability of myocardial tissue regeneration. The aim of this study is to develop a core/shell fibrous cardiac patch having desirable mechanical properties and biocompatibility to engineer the infarcted myocardium. Method We fabricated poly(glycerol sebacate)/fibrinogen (PGS/fibrinogen) core/shell fibers with core as elastomeric PGS provides suitable mechanical properties comparable to that of native tissue and shell as fibrinogen to promote cell–biomaterial interactions. The PGS/fibrinogen core/shell fibers and fibrinogen nanofibers were characterized by SEM, contact angle and tensile testing to analyze the fiber morphology, wettability, and mechanical properties of the scaffold. The cell–scaffold interactions were analyzed using isolated neonatal cardiomyocytes for cell proliferation, confocal analysis for the expression of marker proteins α-actinin, Troponin-T, β-myosin heavy chain and connexin 43 and SEM analysis for cell morphology. Results We observed PGS/fibrinogen core/shell fibers had a Young's modulus of about 3.28±1.7MPa, which was comparable to that of native myocardium. Neonatal cardiomyocytes cultured on these scaffolds showed normal expression of cardiac specific marker proteins α-actinin, Troponin, β-myosin heavy chain and connexin 43 to prove PGS/fibrinogen core/shell fibers have potential for cardiac tissue engineering. Conclusion Results indicated that neonatal cardiomyocytes formed predominant gap junctions and expressed cardiac specific marker proteins on PGS/fibrinogen core/shell fibers compared to fibrinogen nanofibers, indicating PGS/fibrinogen core/shell fibers may serve as a suitable cardiac patch for the regeneration of infarcted myocardium.

Synthetic biodegradable elastomers are an emerging class of materials that play a critical role in supporting innovations in bioabsorbable medical implants. This work describes the synthesis and characterization of poly (glycerol-co-sebacate)-cinnamate (PGS-CinA), a biodegradable elastomer based on hyperbranched polyesters derivatized with pendant cinnamate groups. PGS-CinA can be prepared via photodimerization in the absence of photoinitiator using monomers that are found in common foods. The resulting network exhibits a Young’s modulus of 50.5 to 152.1 kPa and a projected in vitro degradation half-life time between 90 and 140 days. PGS-CinA elastomers are intrinsically cell adherent and support rapid proliferation of fibroblasts. Spreading and proliferation of fibroblasts are loosely governed by the substrate stiffness within the range of Young’s moduli in PGS-CinA networks that were prepared. The thermo-mechanical properties, biodegradability, and intrinsic support of cell attachment and proliferation suggest that PGS-CinA networks abroadly applicable for use in next generation bioabsorable materials including temporary medical devices and scaffolds for soft tissue engineering.

Microfabricated elastomeric scaffolds with 3D structural patterns are created by semiautomated layer-by-layer assembly of planar polymer sheets with through-pores. The mesoscale interconnected pore architectures governed by the relative alignment of layers are shown to direct cell and muscle-like fiber orientation in both skeletal and cardiac muscle, enabling scale up of tissue constructs towards clinically relevant dimensions. ©2013, National Heart, Lung and Blood Institute (award: 1-R01-HL107503)

Synthetic biodegradable elastomers are a class of polymers that have demonstrated far-reaching utility as biomaterials for use in many medical applications. Biodegradable elastomers can be broadly classified into networks prepared by either step-growth or chain-growth polymerization. Each processing strategy affords distinct advantages in terms of capabilities and resulting properties of the network. This work describes the synthesis, processing, and characterization of cross-linked polyester networks based on Diels-Alder coupling reactions. Hyperbranched furan-modified polyester precursors based on poly(glycerol-co-sebacate) are coupled with bifunctional maleimide cross-linking agents. The chemical and thermomechanical properties of the elastomers are characterized at various stages of network formation. Experimental observations of gel formation are compared to theoretical predictions derived from Flory-Stockmayer relationships. This cross-linking strategy confers unique advantages in processing and properties including the ability to fabricate biodegradable reconfigurable covalent networks without additional catalysts or reaction byproducts. Reconfigurable biodegradable networks using Diels-Alder cycloaddition reactions permit the fabrication of shape-memory polymers with complex permanent geometries. Biodegradable elastomers based on polyester networks with molecular reconfigurability achieve vastly expanded properties and processing capabilities for potential applications in medicine and beyond.

Poly(glycerol sebacate) (PGS), a tough elastomer, has been proposed for tissue engineering applications due to its desired mechanical properties, biocompatibility and controlled degradation. Despite interesting physical and chemical properties, PGS shows limited water uptake capacity (∼2%), thus constraining its utility for soft tissue engineering. Therefore, a modification of PGS that would mimic the water uptake and water retention characteristics of natural extracellular matrix is beneficial for enhancing its utility for biomedical applications. Here, we report the synthesis and characterization of highly elastomeric poly(glycerol sebacate)-co-polyethylene glycol (PGS-co-PEG) block copolymers with controlled water uptake characteristics. By tailoring the water uptake property, it is possible to engineer scaffolds with customized degradation and mechanical properties. The addition of PEG results in almost 15-fold increase in water uptake capacity of PGS, and improves its mechanical stability under dynamic loading conditions. PGS-co-PEG polymers show elastomeric properties and can be subjected to serve deformation such as bending and stretching. The Young's modulus of PGS-co-PEG can be tuned from 13 kPa to 2.2 MPa by altering the amount of PEG within the copolymer network. Compared to PGS, more than six-fold increase in elongation was observed upon PEG incorporation. In addition, the rate of degradation increases with an increase in PEG concentration, indicating that degradation rate of PGS can be regulated. PGS-co-PEG polymers also support cell proliferation, and thus can be used for a range of tissue engineering applications.

Tissue engineered replacement heart valves may be capable of overcoming the lack of growth potential intrinsic to current non-viable prosthetics, and thus could potentially serve as permanent replacements in the surgical repair of pediatric valvular lesions. However, the evaluation of candidate combinations of cells and scaffolds lacks a biomimetic in vitro model with broadly tunable, anisotropic and elastomeric structural–mechanical properties. Toward establishing such an in vitro model, in the current study, porcine aortic and pulmonary valvular interstitial cells (i.e. biomimetic cells) were cultivated on anisotropic, micromolded poly(glycerol sebacate) scaffolds (i.e. biomimetic scaffolds). Following 14 and 28 days of static culture, cell-seeded scaffolds and unseeded controls were assessed for their mechanical properties, and cell-seeded scaffolds were further characterized by confocal fluorescence and scanning electron microscopy, and by collagen and DNA assays. Poly(glycerol sebacate) micromolding yielded scaffolds with anisotropic stiffnesses resembling those of native valvular tissues in the low stress–strain ranges characteristic of physiologic valvular function. Scaffold anisotropy was largely retained upon cultivation with valvular interstitial cells; while the mechanical properties of unseeded scaffolds progressively diminished, cell-seeded scaffolds either retained or exceeded initial mechanical properties. Retention of mechanical properties in cell-seeded scaffolds paralleled the accretion of collagen, which increased significantly from 14 to 28 days. This study demonstrates that valvular interstitial cells can be cultivated on anisotropic poly(glycerol sebacate) scaffolds to yield biomimetic in vitro models with which clinically relevant cells and future scaffold designs can be evaluated.

The preponderance of temporomandibular joint (TMJ) disorders involving TMJ disc injury inspires the need to further explore tissue engineering strategies. The objective of this study was to examine the potential of poly (glycerol sebacate) (PGS), a biocompatible, biodegradable elastomer, as a porous scaffold material for the TMJ disc. Goat fibrochondrocytes were seeded on PGS at three seeding densities (25, 50, 100 million cells/mL scaffold), respectively, and cultured for 24 h, 2 weeks, and 4 weeks. The resulting histological, biochemical, and biomechanical properties were determined. Histological staining revealed an abundance of both collagen and glycosaminoglycans (GAG) throughout the high seeding density scaffolds at 4 weeks. There was also a significant increase in the cellular content in all groups over the four-week period, showing that the scaffolds promoted cell attachment and proliferation. The PGS scaffolds supported the deposition of large quantities of extracellular matrix, with differences noted between seeding density groups. At 4 weeks, the medium and high seeding density groups had significantly more collagen per scaffold (181±46 μg and 218±24 μg, respectively) than the low seeding density group (105±28 μg) (p

Decellularization of tissues and organs has high potential to obtain unique conformation and composition as native tissue structure but may result in weakened tissue mechanical strength. In this study, poly(glycerol-sebacate) (PGS) elastomers were combined with decellularized aorta fragments to investigate the changes in mechanical properties. PGS prepolymer was synthesized via microwave irradiation and then in situ crosslinked within the decellularized aorta extracellular matrix (ECM). Tensile strength (σ) values were found comparable as 0.44 ± 0.10 MPa and 0.57 ± 0.18 MPa for native and hybrid aorta samples, respectively, while elongation at break (ɛ) values were 261% ± 17%, 7.5% ± 0.57%, and 22.18% ± 2.48% for wet control (native), decellularized dried aortae, and hybrid matrices, showing elastic contribution. Young's modulus data indicate that there was a threefold decrease in stiffness compared to decellularized samples once PGS is introduced into the ECM structure. Scanning electron microscopy (SEM) analysis of hybrid grafts revealed that the construct preserves porosity in medial layer of the vessel. Biocompatibility analyses showed no cytotoxic effects on human abdominal aorta smooth muscle cells. Cell studies showed 98% activity in hybrid graft extracts. As a control, collagen coating of the hybrid grafts was performed in the recellularization stage. SEM analysis of recellularized hybrid grafts revealed that cells were attached to the surface of the hybrid graft and proliferated during the 14 days of culture in both groups. This study shows that introducing an elastomer into the native ECM structure following decellularization process can be a useful approach for the preparation of mechanically enhanced composites for soft tissues.

WOS: 000392165600038 PubMed: 28024592 This study aims to establish a facile protocol for the preparation of a bi-layered poly(glycerol-sebacate) (PGS)/beta-tricalcium phosphate (beta-TCP) construct and to investigate its potential for bone-soft tissue engineering applications. The layered structure was prepared by distributing the ceramic particles within a prepolymer synthesized in a microwave reactor followed by a cross-linking of the final construct in vacuum (

Mechanical load influences bone structure and mass. Arguing the importance of load-transduction, we investigated the mechanisms inducing bone formation using an elastomeric substrate. We characterized Poly (glycerol sebacate) (PGS) in vitro for its mechanical properties, compatibility with osteoprogenitor cells regarding adhesion, proliferation, differentiation under compression versus static cultures and in vivo for the regeneration of a rabbit ulna critical size defect. The load-transducing properties of PGS were compared in vitro to a stiffer poly lactic-co-glycolic-acid (PLA/PGA) scaffold of similar porosity and interconnectivity. Under cyclic compression for 7 days, we report focal adhesion kinase overexpression on the less stiff PGS and upregulation of the transcription factor Runx2 and late osteogenic markers osteocalcin and bone sialoprotein (1.7, 4.0 and 10.0 folds increase respectively). Upon implanting PGS in the rabbit ulna defect, histology and micro-computed tomography analysis showed complete gap bridging with new bone by the PGS elastomer by 8 weeks while minimal bone formation was seen in empty controls. Immunohistochemical analysis demonstrated the new bone to be primarily regenerated by recruited osteoprogenitors cells expressing periostin protein during early phase of maturation similar to physiological endochondral bone development. This study confirms PGS to be osteoconductive contributing to bone regeneration by recruiting host progenitor/stem cell populations and as a load-transducing substrate, transmits mechanical signals to the populated cells promoting differentiation and matrix maturation toward proper bone remodeling. We hence conclude that the material properties of PGS being closer to osteoid tissue rather than to mineralized bone, allows bone maturation on a substrate mechanically closer to where osteoprogenitor/stem cells differentiate to develop mature load-bearing bone. Significance of Significance The development of effective therapies for bone and craniofacial regeneration is a foremost clinical priority in the mineralized tissue engineering field. Currently at risk are patients seeking treatment for craniofacial diseases, traumas and disorders including birth defects such as cleft lip and palate, (1 in 525 to 714 live births), craniosynostosis (300–500 per 1,000,000 live births), injuries to the head and face (20 million ER visits per year), and devastating head and neck cancers (8000 deaths and over 30,000 new cases per year). In addition, approximately 6.2 million fractures occur annually in the United States, of which 5–10% fail to heal properly, due to delayed or non-union [1], and nearly half of adults aged 45–65 have moderate to advanced periodontitis with associated alveolar bone loss, which, if not reversed, will lead to the loss of approximately 6.5 teeth/individual [2]. The strategies currently available for bone loss treatment largely suffer from limitations in efficacy or feasibility, necessitating further development and material innovation. Contemporary materials systems themselves are indeed limited in their ability to facilitate mechanical stimuli and provide an appropriate microenvironment for the cells they are designed to support. We propose a strategy which aims to leverage biocompatibility, biodegradability and material elasticity in the creation of a cellular niche. Within this niche, cells are mechanically stimulated to produce their own extracellular matrix. The hypothesis that mechanical stimuli will enhance bone regeneration is supported by a wealth of literature showing the effect of mechanical stimuli on bone cell differentiation and matrix formation. Using mechanical stimuli, to our knowledge, has not been explored in vivo in bone tissue engineering applications. We thus propose to use an elastomeric platform, based on poly(glycerol sebacate (PGS), to mimic the natural biochemical environment of bone while enabling the transmission of mechanical forces. In this study we report the material’s load-transducing ability as well as falling mechanically closer to bone marrow and osteoid tissue rather than to mature bone, allowed osteogenesis and bone maturation. Defying the notion of selecting bone regeneration scaffolds based on their relative mechanical comparability to mature bone, we consider our results in part novel for the new application of this elastomer and in another fostering for reassessment of the current selection criteria for bone scaffolds.

Poly(glycerol sebacate) (PGS) has been used successfully as a scaffolding material for soft tissue engineering. PGS scaffolds, however, are usually mechanically isotropic, which may restrict their use in tissue repairs as many soft tissues in the body have anisotropic mechanical behaviors. Although various methods have been used to fabricate anisotropic scaffolds, it remains challenging to make anisotropic scaffolds from thermoset PGS. Here a new, simple method to fabricate an anisotropic PGS membrane which can then be used to construct thicker three-dimensional anisotropic scaffolds was developed. First, an aligned sacrificial poly(vinyl alcohol) fibrous membrane was prepared by electrospinning. The fibrous membrane was then partially immersed in PGS prepolymer solution, resulting in a composite membrane upon drying. After curing, the sacrificial fibers within the membrane were removed by water, supposedly leaving aligned cylindrical pores in the membrane. Both SEM and AFM illustrated aligned grooves on the surface of the resultant PGS membrane, indicating the successful removal of sacrificial fibers. The PGS membrane was validated to be mechanically anisotropic using uniaxial tensile testing along and perpendicular to the predominant pore direction. The in vitro cytocompatibility of the PGS membrane was confirmed. As a demonstration of its potential application in vascular tissue engineering, a tubular scaffold was constructed by wrapping a stack of two axisymmetric pieces of the anisotropic PGS membranes on a mandrel. The compliance of the scaffold was found to depend on the pitch angle of its double helical structure, imitating the anisotropic mechanical behavior of the arterial media. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 760-770, 2018.

Mango kernel oil (MKO), derived from mango kernels, considered to be one of the highly generated agro-industrial waste, is assessed for its use as substrate for sustainable production of rhamnolipids. In the present study, MKO in combination with glucose gave maximum rhamnolipid yield of 2.8 g/l which reduced the surface tension of water from 72 to 30 mN/m, holding a CMC of 80 mg/l and also showed high emulsification activity (73%) with diesel. Cell free broth was found to be stable even at high temperature (autoclaved at 121 °C for 30 min), pH value (up to pH 12) and salinity (up to 20% NaCl). The LC–MS data showed mono-rhamnolipid to be predominant congener followed by di-rhamnolipid in presence of MKO. Whereas, di-rhamnolipid was abundant when a combination of MKO with glucose was used. The produced rhamnolipid mixture showed good antifungal activity against various phytopathogens.

The hypothesis that chronic feeding of the triglycerides of octanoate (trioctanoin) and decanoate (tridecanoin) in “a regular non-ketogenic diet” is anticonvulsant was tested and possible mechanisms of actions were subsequently investigated. Chronic feeding of 35E% of calories from tridecanoin, but not trioctanoin, was reproducibly anticonvulsant in two acute CD1 mouse seizure models. The levels of beta-hydroxybutyrate in plasma and brain were not significantly increased by either treatment relative to control diet. The respective decanoate and octanoate levels are 76 µM and 33 µM in plasma and 1.17 and 2.88 nmol/g in brain. Tridecanoin treatment did not alter the maximal activities of several glycolytic enzymes, suggesting that there is no reduction in glycolysis contributing to anticonvulsant effects. In cultured astrocytes, 200 µM of octanoic and decanoic acids increased basal respiration and ATP turnover, suggesting that both medium chain fatty acids are used as fuel. Only decanoic acid increased mitochondrial proton leak which may reduce oxidative stress. In mitochondria isolated from hippocampal formations, tridecanoin increased respiration linked to ATP synthesis, indicating that mitochondrial metabolic functions are improved. In addition, tridecanoin increased the plasma antioxidant capacity and hippocampal mRNA levels of heme oxygenase 1, and FoxO1.

BACKGROUND: Mild acute pancreatitis (MAP) is a common acute abdominal disease, and exhibits rising incidence in recent decades. As an important component of systemic biology, metabonomics is a new discipline developed following genomics and proteomics. In this study, the objective was to analyze the serum metabonomics of patients with MAP, aiming to screen metabolic markers with potential diagnostic values. METHODS: An analysis platform with ultra performance liquid chromatography‐high‐resolution mass spectrometry was used to screen the difference metabolites related to MAP diagnosis and disease course monitoring. RESULTS: A total of 432 endogenous metabolites were screened out from 122 serum samples, and 49 difference metabolites were verified, among which 12 difference metabolites were identified by nonparametric test. After material identification, eight metabolites exhibited reliable results, and their levels in MAP serum were higher than those in healthy serum. Four metabolites exhibited gradual downward trend with treatment process going on, and the differences were statistically significant (P < 0.05). CONCLUSION: Metabonomic analysis has revealed eight metabolites with potential diagnostic values toward MAP, among which four metabolites can be used to monitor the disease course.

Mimicking native functional dynamics for traditional biomaterials such as thermoset elastomers is limited due to their lack of responsiveness to biological stimuli and difficulties to incorporate biofunctionalities. Furthermore, the mechanical fracture of traditional thermoset elastomers caused by irreversible covalent bond rupture would lead to their permanent loss of properties. To overcome these challenges, degradable self-healed supramolecular bioelastomers are designed by an elastic poly(glycerol sebacate) (PGS) backbone and multiple hydrogen-bonding ureido-pyrimidinone (UPy) grafts. These supramolecular elastic polymers exhibit efficient self-healing, rapid shape-memory abilities and highly tunable mechanical properties due to the dynamic supramolecular interactions, and perform a good biocompatibility in vitro and a mild host response in vivo. By combining modular approaches, these supramolecular bioelastomers have been further assembled into a multifunctional platform to expand their applications in different biomedical fields. These include a complex 3D scaffold with shape-memory capacity and anisotropic mechanical properties, a controllable drug delivery model via a layer-by-layer technique, a surface antibacterial composite by physical modification, and a spatial oriented cell co-culture system via incorporating different cell-laden self-healing films, demonstrating their potential as building blocks in a wide range of biomedical applications where dynamic properties and biological functions are desired.

Nerve tissue engineering (TE) requires biomimetic scaffolds providing essential chemical and topographical cues for nerve regeneration. Poly(glycerol sebacate) (PGS) is a biodegradable and elastic polymer that has gained great interest as a TE scaffolding biomaterial. However, uncured PGS is difficult to be electrospun into nanofibers. PGS would, therefore, require the addition of electrospinning agents. In this study, we modified PGS by using atom transfer radical polymerization (ATRP) to synthesize PGS-based copolymers with methyl methacrylate (MMA). The synthesized PGS-PMMA copolymer showed a molecular weight of 82kDa and a glass transition temperature of 115°C. More importantly, the PGS-PMMA could be easily electrospun into nanofiber with a fiber diameter of 167±33nm. Blending gelatin into PGS-PMMA nanofibers was found to increase its hydrophilicity and biocompatibility. Rat PC12 cells were seeded onto the PGS-PMMA/gelatin nanofibers to investigate their potential for nerve regeneration. It was found that gelatin-containing PGS-based nanofibers promoted cell proliferation. The elongated cell morphology observed on such nanofibers indicated that the scaffolds could induce the neurite outgrowth of the nerve stem cells. Overall, our study suggested that the synthesis of PGS-based copolymers might be a promising approach to enhance their processability, and therefore advancing bioscaffold engineering for various TE applications.

Many surgical interventions for cardiovascular disease are limited by the availability of autologous vessels or suboptimal performance of prosthetic materials. Tissue engineered vascular grafts show significant promise, but have yet to achieve clinical efficacy in small caliber (

The study of biomaterials for gene delivery in tissue engineering and regenerative medicine is a growing area, necessitating the investigation of new biomaterials and gene delivery vectors. Poly(1,8-octanediol citrate) (POC) and poly(glycerol-sebacate) (PGS) are biodegradable, biocompatible elastomers that have tunable mechanical properties, surface characteristics, and degradation rate. The objective of this work was to investigate whether POC and PGS would support the immobilization and release of lentivirus to allow sustained and localized transgene expression. Porous biomaterials were prepared using salt as a porogen, and in vitro and in vivo transgene expression from immobilized and released lentiviruses were assessed. Cells seeded onto biomaterials loaded with lentiviruses yielded titer-dependent transgene expression in vitro. Lentivirus activity on both biomaterials was maintained for at least 5 days. When implanted subcutaneously in rats, POC and PGS with immobilized lentivirus exhibited sustained and localized transgene expression for at least 5 weeks. This research demonstrates that lentivirus immobilization on POC and PGS is feasible and potentially useful for a variety of tissue engineering and regenerative medicine applications. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2013.

The tympanic membrane (TM), separating the external and middle ear, consists of fibrous connective tissue sandwiched between epithelial layers. To treat chronic ear infections, tympanostomy drainage tubes are placed in surgically created holes in TMs which can become chronic perforations upon extrusion. Perforations are repaired using a variety of techniques, but are limited by morbidity, unsatisfactory closure rates, or minimal regeneration of the connective tissue. A more effective, minimally-invasive therapy is necessary to enhance the perforation closure rate. Current research utilizing decellularized or alignate materials moderately enhance closure but the native TM architecture is not restored. Poly(glycerol sebacate) (PGS) is a biocompatible elastomer which supports cell migration and enzymatically degrades in contact with vascularized tissue. PGS spool-shaped plugs were manufactured using a novel process. Using minimally invasive procedures, these elastomeric plugs were inserted into chronic chinchilla TM perforations. As previously reported, effective perforation closure occurred as both flange surfaces were covered by confluent cell layers; >90% of perforations were closed at 6-week postimplantation. This unique in vivo environment has little vascularized tissue. Consequently, PGS degradation was minimal over 16-week implantation, hindering regeneration of the TM fibrous connective tissue. PGS degradation must be enhanced to promote complete TM regeneration.

Scaffold tissue engineering strategies for repairing and replacing soft tissue aim to improve reconstructive and corrective surgical techniques whose limitations include suboptimal mechanical properties, fibrous capsule formation and volume loss due to graft resorption. An effective tissue engineering strategy requires a scaffolding material with low elastic modulus that behaves similarly to soft tissue, which has been characterized as a nonlinear elastic material. The material must also have the ability to be manufactured into specifically designed architectures. Poly(glycerol sebacate) (PGS) is a thermoset elastomer that meets these criteria. We hypothesize that the mechanical properties of PGS can be modulated through curing condition and architecture to produce materials with a range of stiffnesses. To evaluate this hypothesis, we manufactured PGS constructs cured under various conditions and having one of two architectures (solid or porous). Specimens were then tensile tested according to ASTM standards and the data were modeled using a nonlinear elastic Neo-Hookean model. Architecture and testing conditions, including elongation rate and wet versus dry conditions, affected the mechanical properties. Increasing curing time and temperature led to increased tangent modulus and decreased maximum strain for solid constructs. Porous constructs had lower nonlinear elastic properties, as did constructs of both architectures tested under simulated physiological conditions (wetted at 37 °C). Both solid and porous PGS specimens could be modeled well with the Neo-Hookean model. Future studies include comparing PGS properties to other biological tissue types and designing and characterizing PGS scaffolds for regenerating these tissues.

Host remodeling is important for the success of medical implants, including vascular substitutes. Synthetic and tissue-engineered grafts have yet to show clinical effectiveness in arteries smaller than 5 mm in diameter. We designed cell-free biodegradable elastomeric grafts that degrade rapidly to yield neoarteries nearly free of foreign materials 3 months after interposition grafting in rat abdominal aorta. This design focuses on enabling rapid host remodeling. Three months after implantation, the neoarteries resembled native arteries in the following aspects: regular, strong and synchronous pulsation; a confluent endothelium and contractile smooth muscle layers; expression of elastin, collagen and glycosaminoglycan; and tough and compliant mechanical properties. Therefore, future studies employing large animal models more representative of human vascular regeneration are warranted before clinical translation. This cell-free approach represents a philosophical shift from the prevailing focus on cells in vascular tissue engineering and may have an impact on regenerative medicine in general.

Codling moth, Cydia pomonella (L.), larvae cause severe internal feeding damage to apples, pears, and walnuts worldwide. Research has demonstrated that codling moth neonate first instar larvae are attracted to a pear-derived kairomone, ethyl (2E,4Z)-2,4-decadienoate, the pear ester (PE). Reported here are the behavioral activities of neonate codling moth larvae to microencapsulated pear ester (MEC-PE) applied in aqueous solutions to both filter paper and apple leaf surfaces that were evaluated over a period of up to 20 d of aging. In dual-choice tests the MEC-PE treatment elicited attraction to and longer time spent on treated zones of filter papers relative to water-treated control zones for up to 14 d of aging. A higher concentration of MEC-PE caused no preferential response to the treated zone for the first 5 d of aging followed by significant responses through day 20 of aging, suggesting sensory adaptation as an initial concentration factor. Estimated emission levels of PE from treated filter papers were experimentally calculated for the observed behavioral thresholds evident over the aging period. When applied to apple leaves, MEC-PE changed neonate walking behavior by eliciting more frequent and longer time periods of arrestment and affected their ability to find the leaf base and stem or petiole. Effects of MEC-PE on extended walking time and arrestment by codling moth larvae would increase temporal and spatial exposure of neonates while on leaves; thereby potentially disrupting fruit or nut finding and enhancing mortality by increasing the exposure to insecticides, predation, and abiotic factors.

Traps baited with ethyl (E,Z)-2,4-decadienoate (pear ester) or (E)-4,8-dimethyl-1,3,7-nonatriene (DMNT) in two- or three-way combinations with the sex pheromone (E,E)-8,10-dodecadien-1-ol (codlemone) and acetic acid (AA) were evaluated for codling moth, Cydia pomonella (L.). All studies were conducted in apple orchards, Malus domestica Borkhausen, treated with sex pheromone dispensers during 2010. Septa were loaded with codlemone, DMNT, and pear ester individually or codlemone with either DMNT or pear ester together (combo lures). Polyethylene vials loaded with AA were added as a co-lure. Residual analyses of field-aged combo lures and weight loss of the AA co-lure were conducted. AA vials lost 50-150 mg wk(-1). Weekly weight loss was not affected by field aging, but was closely correlated with the daily mean temperature. Pear ester was released from septa at a slightly higher but nonsignificant rate than codlemone. DMNT was released at a significantly higher rate than codlemone, and lures were effective for 4 wk. The addition of codlemone to traps baited with either host plant volatile plus AA had either no effect or significantly increased total moth catches. The addition of AA significantly increased the catch of female moths with either combo lure. Total moth catches in traps baited with pear ester or DMNT combo lures and AA did not differ and were either significantly higher or similar to the pear ester combo lure. These data suggest that codling moth may be more effectively monitored in sex pheromone-treated orchards with multi-component lures, including codlemone, AA, and host plant volatiles.

Polyvinyl chloride polymer (PVC) dispensers loaded with ethyl (E,Z)-2,4-decadienoate (pear ester) plus the sex pheromone, (E,E)-8,10-dodecadien-1-ol (codlemone) of codling moth, Cydia pomonella (L.), were compared with PVC dispensers and a commercial dispenser (Isomate-C Plus) loaded with codlemone. Evaluations were conducted in replicated plots (0.1-0.2 ha) in apple, Malus domestica (Borkhausen) during both generations of codling moth from 2007 to 2009. Dispensers were applied at 1,000 ha(-1). Male captures in traps baited with virgin female moths and codlemone lures were recorded. Residual analysis of field-aged dispensers over both moth generations was conducted. Dispensers exhibited linear declines in release rates of both attractants, and pear ester was released at a significantly higher rate than codlemone during both time periods. The proportion of virgin female-baited traps catching males was significantly lower with combo dispenser TRE24 (45/110, mg codlemone/mg pear ester) during the second generation in 2007 and the combo dispensers TRE144 (45/75) and TRE145 (75/45) during the first generation in 2008 compared with Isomate-C Plus. Similarly, male catches in female-baited traps in plots treated with the combo dispensers TRE144 during the first generation in 2008 and TRE23 (75/110) during the second generation, in 2007 were significantly lower than in plots treated with Isomate-C Plus. No significant differences were found for male catches in codlemone-baited traps in plots treated with Isomate-C Plus and any of the combo dispensers. However, male catches were significantly lower in plots treated with Cidetrak CM (codlemone-only dispenser) than the combo TRE144 dispenser during both generations in 2009.

Poly(glycerol-sebacate) (PGS) is an elastomeric biodegradable polyester that could be used as biodegradable drug carrier. We have previously prepared PGS implants doped with 5-fluorouracil (5-FU-PGSs) and found that 5-FU-PGSs exhibited an initial burst of 5-FU release during in vitro degradation. The synthesis temperature and time are two of the most important reaction conditions for polymer synthesis. Therefore, in order to establish a controllable drug-release manner, we prepared a series of 5-FU-PGS with 2% weight of 5-FU under synthesis conditions with different polycondensing temperature and time and characterized the infrared spectrum properties, in vitro degradation and drug release. Results showed that the polycondensing temperature determined the mechanical properties, degradation and drug release of 5-FU-PGSs. With the polycondensing temperature increasing, the elastic modulus and hardness of 5-FU-PGSs increased, and the mass loss and 5-FU release rate decreased. The polycondensing time had no significant influence on the mechanical property, degradation and drug release of 5-FU-PGSs. We suggest that the polycondensing temperature is the factor to control the drug-release manner.

Lipase-catalyzed synthesis of 6-O-glucosyldecanoate from d -glucose and decanoic acid was performed in dimethyl sulfoxide (DMSO), a mixture of DMSO and tert-butanol and tert-butanol alone with a decreasing order of polarity. The highest conversion yield (>65%) of decanoic acid was obtained in the blended solvent of intermediate polarity mainly because it could dissolve relatively large amounts of both the reactants. The reaction obeyed Michaelis–Menten type of kinetics. The affinity of the enzyme towards the limiting substrate (decanoic acid) was not affected by the polarity of the solvent, but increased significantly with temperature. The esterification reaction was endothermic with activation energy in the range of 60–67 kJ mol−1. Based on the Gibbs energy values, in the solvent blend of DMSO and tert-butanol the position of the equilibrium was shifted more towards the products compared to the position in pure solvents. Monoester of glucose was the main product of the reaction.

The goal of this study was to design and develop a myocardial patch to use in the repair of myocardial infarctions or to slow down tissue damage and improve long-term heart function. The basic 3D construct design involved two biodegradable macroporous tubes, to allow transport of growth media to the cells within the construct, and cell seeded, aligned fiber mats wrapped around them. The microfibrous mat housed mesenchymal stem cells (MSCs) from human umbilical cord matrix (Wharton’s Jelly) aligned in parallel to each other in a similar way to cell organization in native myocardium. Aligned micron-sized fiber mats were obtained by electrospinning a polyester blend (PHBV (5% HV), P(L-D,L)LA (70:30) and poly(glycerol sebacate) (PGS)). The micron-sized electrospun parallel fibers were effective in Wharton’s Jelly (WJ) MSCs alignment and the cells were able to retract the mat. The 3D construct was cultured in a microbioreactor by perfusing the growth media transiently through the macroporous tubing for two weeks and examined by fluorescence microscopy for cell distribution and preservation of alignment. The fluorescence images of thin sections of 3D constructs from static and perfused cultures confirmed enhanced cell viability, uniform cell distribution and alignment due to nutrient provision from inside the 3D structure.

Vinyl decanoate-modified dextran macromolecules (DexT40-VD) were synthesized in dimethyl sulfoxide at 50°C using lipase AY from Candida rugosa for catalyzing transesterification between polysaccharide and vinyl fatty esters. The extent of dextran modification (quantified by the molar ratio of attached alkyl tails to sugar repeat units) with native-, pH-adjusted-, 18-crown-6 ether pretreated pH-adjusted-, and stepwise addition of pretreated lipase AY yielded

Retinal transplantation experiments have advanced considerably during recent years, but remaining diseased photoreceptor cells in the host retina physically obstruct the development of graft–host neuronal contacts that are required for vision. We here report selective removal of photoreceptors using the biodegradable elastomer poly(glycerol sebacate) (PGS). A 1 × 3 mm PGS membrane was implanted in the subretinal space of normal rabbit eyes, and morphologic specimens were examined with hematoxylin and eosin staining and a panel of immunohistochemical markers. Seven days postoperatively, a patent separation of the neuroretina and retinal pigment epithelium was found as well as loss of several rows of photoreceptors in combination with massive terminal transferase-mediated dUTP nick-end labeling (TUNEL) staining for apoptosis in the outer nuclear layer. After 28 days, the neuroretina was reattached, the PGS membrane had degraded, and photoreceptors were absent in the implantation area. Activated Müller cells were found in the entire retina in 7-day specimens, and in the implantation area after 28 days. AII amacrine and rod bipolar cell morphology was not affected, except for disrupted dendritic branching, which was present in rod bipolar cells in 28-day specimens. We conclude that retinal detachment induced by the biodegradable PGS membrane creates a permissive environment in which graft–host neuronal connections may be facilitated in future retinal transplantation experiments.

Immunofluorescence imaging on polymeric biomaterials is often inhibited by autofluorescence and other optical phenomena. This often limits the analysis that can be performed on cells that are in contact with these materials. This study outlines a method that will quench these inhibitive optical phenomena on a variety of polymeric materials, including poly(glycerol sebacate), poly(urethane), poly(L-lactide-co-ε-caprolactone), and poly(lactic acid-co-glycolic acid). The method uses a simple material treatment method utilizing Sudan Black B (SB), which is commonly used as an autofluorescence quenching molecule in tissue histology, but has not yet been used in biomaterials analysis. The quenching mechanism in the selected polymers is investigated using attenuated total reflectance Fourier transform infrared spectroscoy, ultraviolet-visible light absorbance and fluorescence analysis, and scanning electron microscopyobservation of the material morphology prior to and after SB treatment. The results point to SB eliminating the inhibitive light phenomena of these materials by two methods: (i) chemical interaction between SB and the polymer molecules and (ii) physical interaction whereby SB forms a physical barrier that can absorb scattered light and quench autofluorescence interference during fluorescence microscopy. The studies show that the treatment of polymers with SB is robust across the polymers tested, in both porous and non-porous formats. The method does not interfere with immunofluorescent imaging of fluorescently labeled biological cells cultured on these polymers. This quick, simple, and affordable method enables a variety of analyses to be conducted that may otherwise have been impractical or impossible.

The biosurfactant produced by Pseudomonas desmolyticum NCIM 2112 (Pd 2112) was confirmed as rhamnolipid based on the formation of dark blue halos around the colonies in CTAB-methylene blue agar plates and the content of rhamnose sugar. The average yield of rhamnolipid was 0.398 g/l/day when grown on hexadecane as sole carbon source. Pd 2112 emulsification potential associated with cell free culture broth was stable for 72 h using various hydrocarbons and vegetable oils. Chemical structure of the biosurfactant was identified as mono-rhamnolipid (Rha-C6–C8) using HPTLC, fourier transform infrared spectroscopy, 1H and 13C NMR and gas chromatography-mass spectroscopy analysis. Pd 2112 mono-rhamnolipid (1 mg/ml) had in-creased permeabilization of Bacillus sp VUS NCIM 5342 and increased decolorization rate of textile dye Brown 3REL by 50%. Extracellular activities of lignin peroxidase and veratryl alcohol oxidase, enzymes involved in dye degradation, were significantly increased in the presence of mono-rhamnolipid by 324.52% and 100% respectively. Scanning electron micro-scopy observations revealed that rhamnolipid did not exert any disruptive action on Bacillus cells as compared to Tween 80. The mono-rhamnolipid of Pd 2112 has potential for its application in biodegradation of textile dyes. (© 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Poly(glycerol sebacate) (PGS) is a biodegradable elastomer that has generated great interest as a scaffold material due to its desirable mechanical properties. However, the use of PGS in tissue engineering is limited by difficulties in casting micro- and nanofibrous structures, due to high temperatures and vacuum required for its curing and limited solubility of the cured polymer. In this paper, we developed microfibrous scaffolds made from blends of PGS and poly(e-caprolactone) (PCL) using a standard electrospinning set-up. At a given PGS:PCL ratio, higher voltage resulted in significantly smaller fibre diameters (reduced from ∼4 µm to 2.8 µm; p < 0.05). Further increase in voltage resulted in the fusion of fibres. Similarly, higher PGS concentrations in the polymer blend resulted in significantly increased fibre diameter (p < 0.01). We further compared the mechanical properties of electrospun PGS:PCL scaffolds with those made from PCL. Scaffolds with higher PGS concentrations showed higher elastic modulus (EM), ultimate tensile strength (UTS) and ultimate elongation (UE) (p < 0.01) without the need for thermal curing or photocrosslinking. Biological evaluation of these scaffolds showed significantly improved HUVEC attachment and proliferation compared to PCL-only scaffolds (p < 0.05). Thus, we have demonstrated that simple blends of PGS prepolymer with PCL can be used to fabricate microfibrous scaffolds with mechanical properties in the range of a human aortic valve leaflet.

To efficiently produce short-chain-length-medium-chain-length polyhydroxyalkanoates copolymer from substrate mixture containing sugars and/or fatty acids, fadA gene mutant was constructed in Escherichia coli DH5α phosphotransferase system (PTS) disrupted strain. Plasmids pCJY02, pBHR68 and pBHR71 were separately introduced into E. coli DH5α (ΔptsG, ΔFadA) by transformation, then the recombinants were cultivated in the medium containing glucose and/or decanoate as carbon resource, respectively. When cultivated in the medium containing decanoate, only pCJY02-harboring recombinant was able to accumulate SCL-MCL PHAs consisting of 3HB, 3HHx, 3HO and 3HD with mol ratios: 43.2:12.8:10.3:33.6. The copolymer content was 1.90wt% with 2.69gL(-1) cell dry weight. When cultivated in the medium containing both decanoate and glucose, the recombinant was found to utilize the mixture of glucose and fatty acids and accumulate SCL-MCL PHAs copolymer consisting of 3HB, 3HHx, 3HO and 3HD with mol ratios: 83.4:4.0:5.6:7.0. About 4.90gL(-1) cell dry weight was harvested and total PHAs content was 7.3wt% of CDW. This result indicated that the low-substrate-specificity PHA synthase PhaC2(Ps) endued hosts with the capability of synthesizing PHA copolymers, and the monomer composition of the synthesized PHA could be modulated by controlling the addition of carbon sources and by modifying metabolic pathways in the hosts.

In retinal transplantation experiments it is hypothesized that remaining diseased photoreceptor cells in the host retina and inner retinal cells in transplants physically obstruct the development of graft-host neuronal contacts which are required for vision. Recently, we developed methods for the isolation of donor photoreceptor layers in vitro, and the selective removal of host photoreceptors in vivo using biodegradable elastomeric membranes composed of poly(glycerol-co-sebacic acid) (PGS). We also coated PGS membranes with electrospun nanofibers, composed of laminin and poly(epsilon-caprolactone) (PCL), to promote attachment of embryonic retinal explants, allowing the resulting composites to be handled surgically as a single entity. Here, we report subretinal transplantation of these composites into adult porcine eyes. In hematoxylin and eosin stained sections of composite explants after 5–7 days in vitro, excellent fusion of retinas and biomaterial membranes was noted, with the immature retinal components showing laminated as well as folded and rosetted areas. The composite grafts could be transplanted in all cases and, 3 months after surgery, eyes displayed clear media, attached retinas and the grafts located subretinally. Histological examination revealed that the biomaterial membrane had degraded without any signs of inflammation. Transplanted retinas displayed areas of rosettes as well as normal lamination. In most cases inner retinal layers were present in the grafts. Laminated areas displayed well-developed photoreceptors adjacent to an intact host retinal pigment epithelium and degeneration of the host outer nuclear layer (ONL) was often observed together with occasional fusion of graft and host inner layers.