Search

Abstract The sorption of drugs onto their contents is a known phenomenon that is difficult to analyse precisely. The purpose of this study was to present a non-invasive method for locating and quantifying sorption phenomena using radiopharmaceuticals. Radiopharmaceutical are medicines armed with a radionuclide enabling quantification and imaging using dedicated scanners. The sorption of nine different radiopharmaceuticals on 2- and 3-part syringes was investigated. These syringes were filled with the studied radiopharmaceutical solutions and stored immobile for 3 h. At different times ranging from 0 to 180 min, 10 µL were taken from the syringes and the radioactivity of these samples was determined by a gamma counter. 5 radiopharmaceuticals exhibited no significant sorption at any time point in both 2 and 3-parts syringes, but 4 radiopharmaceuticals exhibited sorption losses varying from 20 to 33% after 3 h contact with 3-part-syringes, but no sorption on 2-part syringes at any time point. [99mTc]Tc-tetrofosmine Single Photon Emission Computed Tomography/Computed Tomography imaging indicated clearly that the interactions were located on the rubber plunger of the 3-part-syringes. The specific nature of radiopharmaceuticals allowed their use as an innovative method to quantify and localize drug sorption phenomena.

Abstract Stability studies are essential to be able to assign an expiration date to medications. Color variation is one of the organoleptic characteristics of actives substances or medications which can indicate the presence of contaminations, impurities or degradations products. However there is no data available comparing the often used visual examination with spectrophotometric measurements during stability studies. The aim of this study was therefore to evaluate precisely how different the two methods are, by comparing the change of color of two drug formulations chosen as models, assessed by visual examination versus a spectrophotometric colorimetric analysis. Paracetamol and parenteral nutrition solutions were stored in stress conditions for up to 46 days, and were subjected to a visual examination using color reference solutions and to lightness and chromaticity measurement to determine their specific color by UV–Vis spectrophotometry. The color of paracetamol solutions changed faster when exposed to stress condition (light), as did the PNS when exposed to heat. In both cases, color variations were detected earlier and more precisely by UV–Vis spectrophotometry than by visual examination. Color measurement using an UV–Vis spectrophotometry should advantageously replace visual examination when assessing colors changes during drug stability studies.

Abstract Background The inability to observe relevant biological processes in vivo significantly restricts human neurodevelopmental research. Advances in appropriate in vitro model systems, including patient-specific human brain organoids and human cortical spheroids (hCSs), offer a pragmatic solution to this issue. In particular, hCSs are an accessible method for generating homogenous organoids of dorsal telencephalic fate, which recapitulate key aspects of human corticogenesis, including the formation of neural rosettes—in vitro correlates of the neural tube. These neurogenic niches give rise to neural progenitors that subsequently differentiate into neurons. Studies differentiating induced pluripotent stem cells (hiPSCs) in 2D have linked atypical formation of neural rosettes with neurodevelopmental disorders such as autism spectrum conditions. Thus far, however, conventional methods of tissue preparation in this field limit the ability to image these structures in three-dimensions within intact hCS or other 3D preparations. To overcome this limitation, we have sought to optimise a methodological approach to process hCSs to maximise the utility of a novel Airy-beam light sheet microscope (ALSM) to acquire high resolution volumetric images of internal structures within hCS representative of early developmental time points. Results Conventional approaches to imaging hCS by confocal microscopy were limited in their ability to image effectively into intact spheroids. Conversely, volumetric acquisition by ALSM offered superior imaging through intact, non-clarified, in vitro tissues, in both speed and resolution when compared to conventional confocal imaging systems. Furthermore, optimised immunohistochemistry and optical clearing of hCSs afforded improved imaging at depth. This permitted visualization of the morphology of the inner lumen of neural rosettes. Conclusion We present an optimized methodology that takes advantage of an ALSM system that can rapidly image intact 3D brain organoids at high resolution while retaining a large field of view. This imaging modality can be applied to both non-cleared and cleared in vitro human brain spheroids derived from hiPSCs for precise examination of their internal 3D structures. This process represents a rapid, highly efficient method to examine and quantify in 3D the formation of key structures required for the coordination of neurodevelopmental processes in both health and disease states. We posit that this approach would facilitate investigation of human neurodevelopmental processes in vitro.

Pentobarbital is a drug of choice to limit motion in children during paediatric procedural sedations (PPSs). However, despite the rectal route being preferred for infants and children, no pentobarbital suppositories are marketed, and therefore they must be prepared by compounding pharmacies. In this study, two suppository formulations of 30, 40, 50, and 60 mg of pentobarbital sodium were developed using hard-fat Witepsol® W25 either alone (formulation F1) or with oleic acid (formulation F2). The two formulations were subjected to the following tests described in the European Pharmacopoeia: uniformity of dosage units, softening time, resistance to rupture, and disintegration time. The stability of both formulations was also investigated for 41 weeks of storage at 5 ± 3 °C using a stability-indicating liquid chromatography method to quantify pentobarbital sodium and research breakdown product (BP). Although both formulae were compliant to uniformity of dosage, the results were in favour of a faster disintegration of F2 compared to F1 (−63%). On the other hand, F1 was found to be stable after 41 weeks of storage unlike F2 for which several new peaks were detected during the chromatographic analysis, suggesting a shorter stability of only 28 weeks. Both formulae still need to be clinically investigated to confirm their safety and efficiency for PPS.

Background: The treatment of relapsed or refractory leukemia remains a major problem. Among the new therapeutic approaches, the use of modified T lymphocytes, called chimeric antigen receptor T cells (CAR-T cells), seems promising. The first step of their preparation is leukapheresis, which involves the collection of mononuclear cells from the patient. This medical procedure requires numerous medical devices (MDs) made of plasticized polyvinylchloride (PVC). These compounds can leach out of the devices during contact with the patient’s blood. The aim of our study was to evaluate the migration of the plasticizers contained in the MD during a simulated pre-CAR-T cell leukapheresis procedure, and to measure the patient’s and their lymphocytes’ exposure to them. Methods: The qualitative and quantitative composition of the MD used for pre-CAR-T cell apheresis was determined by gas chromatography–mass spectrometry (GC–MS). Then, an ex vivo leukapheresis model using an ethanol/water simulant was performed to evaluate the plasticizers’ migration under simulated clinical conditions of pre-CAR-T cells’ cytapheresis. The plasticizers released into the simulant were quantified by GC–MS. Results: Diethylhexylphthalate (DEHP) was found in the apheresis kit, with amounts ranging from 25% to 59% (g/100 g of PVC). Bis(2-ethylhexyl) adipate was detected at trace levels. A total of 98.90 ± 11.42 mg of DEHP was released into the simulant, corresponding to an exposure dose of 1.4 mg/kg for a 70 kg patient. Conclusions: Patients undergoing a pre-CAR-T cell apheresis are mainly exposed to DEHP, which can impact their health because of its endocrine disruption effect, but could also lead to a decrease in CAR-T cells’ efficiency/quality.

For pediatric radiological procedures (RP), pentobarbital sodium (PNa) can be used orally or rectally to replace intravenous anesthesia. Since no commercial PNa suppositories exist, they must be prepared by compounding pharmacies. This study aims to develop fast-dissolving PNa suppositories for fast pharmacological activity during RP. We prepared gelatin (G), gelatin/polyethylene glycol 4000 (GP), and polyethylene glycol 4000 (P) suppositories, with and without pH adjustment, and assessed their dosage uniformity (DU), softening time, rupture resistance, and in-vitro dissolution. An optimal formulation was selected, and PNa release was compared to that of fat-based suppositories using dissolution tests. Additionally, the quality control process (analytical performance, safety/eco-friendliness and productivity/practical effectiveness) of these formulas were compared using a RGB method. All hydrophilic formulas (HF) met the DU requirement (AV < 8 %) except for P (AV 15.62 ± 4 %). pH adjustment enhanced G and GP suppositories resistance to 2.2 ± 0.2 kg and 2.0 ± 0.3 kg, respectively, and allowed 100 % release of PNa in under 10 min. In contrast, lipophilic formulas released less than 80 % of PNa at best after 120 min. These results show the biopharmaceutical suitability of HF for RP compared to lipophilic ones, but a pharmacokinetic study is needed to confirm data., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Peripherally inserted central catheters (PICC-lines) used in neonatology are made of thermoplastic polyurethane (TPU) or silicone. These materials usually contain substances that may leach into drug vehicles or blood. In this extractables study, we determined the optimal extraction conditions using TPU films containing defined amounts of butylhydroxytoluene (BHT) and then applied them on unused and explanted PICC-lines. Maceration and sonication tests were carried out with hexane, acetone and water as the extraction solvents. The analyses were performed using gas and liquid chromatography coupled with mass spectrometry detectors, as well as inductive coupled plasma optical emission spectroscopy to detect a wide range of extractables. We selected a limited list of substances to be sought from the usual adjuvants and monomers, related to their carcinogenic, mutagenic or reprotoxic properties and/or existence in endocrine disruptors lists. The TPU-film experiments showed that acetone was slightly better than hexane, and maceration better than sonication. When applied to PICC-lines, the extraction methods were almost similar but acetone was clearly better than hexane for TPU. From the 48 peaks initially observed in GC-MS, we ended up with 37 peaks to follow in TPU PICC-lines, among which were those of BHT and 4,4'-Methylenebis(cyclohexyl isocyanate) isomers. For silicone PICC-lines, out of 41 peaks initially observed in GC-MS, we followed 20 peaks, most of them being identified as cyclosiloxanes. Barium was the main inorganic element extracted for both PICC-lines. For TPU PICC-lines, the inter-batch variability was higher than for intra-batch, but in silicone devices both were similar. When compared to new PICC-lines, explanted TPU PICC-lines extracted peaks had a lower area under the curve (AUC), while the AUCs of the peaks were higher for the majority of silicone PICC-lines extract compounds. No identified substances were detected above their toxicological threshold, but isocyanates and cyclosiloxanes toxicity was mostly studied for other exposition routes than intravenous. The methods defined in this study were efficient in producing extractable profiles from both PICC-lines., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Objectives: To assess the impact of disparities in production and analytical control processes on the quality of parenteral nutrition (PN) preparations produced in the Auvergne-Rhône-Alpes region., Methods: This study was carried out in four hospital pharmacies of the Auvergne-Rhône-Alpes region. To assess the impact of production processes, each centre produced ten PN preparations from the same prescription. Analytical controls (sodium, potassium and calcium dosage) were carried out on all the preparations. To assess the impact of the control processes, a batch of ten preparations was produced from the same prescription. Samples were sent to the four hospital pharmacies for analytical control (sodium, potassium and calcium dosage)., Results: Measurements of relative production bias show that there is a significant difference between the preparations from the four centres in terms of sodium and potassium content. Each centre had at least one production bias for one of the three electrolytes measured. Concerning analytical controls, there was a significant difference between the four centres in the sodium and potassium levels measured. With the exception of calcium, all the centres reported measurements within the usual specifications of±10% of the target value. The results obtained have no clinically significant impact., Conclusion: The diversity of NP practices has a real impact on the quality of the preparations made. A regional collaboration should be envisaged to standardise patient care., (Copyright © 2023 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.)

Introduction: Medical syringes are widely used in hospitals to store and administer drugs, and the contact time between the drugs and these syringes can vary from a few minutes to several weeks like for pharmaceutical preparations. The aim of this comparative study was to evaluate the potential sorption phenomena occurring between three drugs (paracetamol, diazepam and insulin aspart) and polypropylene syringes (PP) or syringes made of Cyclic Olefin Copolymer (COC)., Materials and Methods: 50 mL 3-part syringes made of either COC with crosslinked silicone on the barrel inner surface (COC-CLS) and a bromobutyl plunger seal, or PP lubricated with silicone oil (PP-SOL) with a polyisoprene plunger seal were used., Results: COC-CLS syringes induced less sorption of diazepam and insulin than PP-SOL syringes and the plunger seal material seemed to be the main cause of these interactions. An alkalinization of the medications in contact with the PP-SOL syringes was observed. It could be caused by leachable compounds and should be investigated further., Conclusion: This work shows once again that it is essential to consider content-container interactions to help improve the safe use of parenteral drugs., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Pentobarbital is a drug of choice to limit motion in children during paediatric procedural sedations (PPSs). However, despite the rectal route being preferred for infants and children, no pentobarbital suppositories are marketed, and therefore they must be prepared by compounding pharmacies. In this study, two suppository formulations of 30, 40, 50, and 60 mg of pentobarbital sodium were developed using hard-fat Witepsol ® W25 either alone (formulation F1) or with oleic acid (formulation F2). The two formulations were subjected to the following tests described in the European Pharmacopoeia: uniformity of dosage units, softening time, resistance to rupture, and disintegration time. The stability of both formulations was also investigated for 41 weeks of storage at 5 ± 3 °C using a stability-indicating liquid chromatography method to quantify pentobarbital sodium and research breakdown product (BP). Although both formulae were compliant to uniformity of dosage, the results were in favour of a faster disintegration of F2 compared to F1 (-63%). On the other hand, F1 was found to be stable after 41 weeks of storage unlike F2 for which several new peaks were detected during the chromatographic analysis, suggesting a shorter stability of only 28 weeks. Both formulae still need to be clinically investigated to confirm their safety and efficiency for PPS.