Search

This study aimed to investigate the effect of the weaning strategy (WS; early, at 130 ± 21 d vs normal, at 187 ± 20 d) and backgrounding length (BGL; short vs long) on growth performance, carcass characteristics, and relative mRNA expression in the longissimus muscle (LM) of beef steers. Angus × SimAngus-crossbred steers [n = 120; body weight (BW) = 130 ± 11.2 kg] were used in randomized complete block design. Steer calves were blocked by age and BW and randomly assigned to 1 of 4 treatments (2×2 factorial arrangement). Treatments consisted of early or normal weaned steers with either a short or a long BGL. Early weaned steers were ad libitum-fed a grain-based diet for 49 d until nursing calves were normally weaned. Subsequently, steers were ad libitum-fed a hay-based diet for 214 d or a concentrates-based diet for 95 d, for the long or the short BGL, respectively. Steers were finished on a high grain diet until harvested at a common 12th rib fat thickness. Longissimus muscle biopsies were performed on days 1, 57, 112, 168, 255. Data were analyzed using PROC MIXED in SAS. Early weaned steers were heavier (P < 0.01; Table 1) at the beginning of the backgrounding and finishing period. When the finishing phase began, steers with a long BGL were heavier (P < 0.01; Table 1) than steers with a short BGL. There was a WS × BGL interaction (P = 0.01; Table 1) for final BW, where normal weaned steers with a long BGL were the heaviest among treatments. In the finishing phase, steers with a long BGL had greater DMI and ADG, but lower G:F (P < 0.01; Table 1) than steers with a short BGL. There was WS × BGL interaction (P = 0.03; Table 1) for days on feed (DOF) in the finishing phase, where early weaned steers with a short BGL required less days on DOF to reach harvesting target than the remaining treatments. No interactions or treatment effects (P = 0.11; Table 2) were detected for marbling score (MS). For the mRNA expression of ZFP423, a WS × d interaction was detected (P < 0.01; Figure 1). Day×WS interaction (P < 0.01) was observed for ZFP423 mRNA expression, early weaned steers showed a greater expression at d 112 and a decreased expression at d 255. For DLK1, a BGL×d interaction occurred (P < 0.01; Figure 2). In d 57 steers with a short BGL presented a greater DLK1 mRNA expression than steers with long BGL, whereas in d 255, this was inverted. Overall, data from this experiment does not support the implementation of different WS and BGL as a method to improve the MS of beef carcasses. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Animal Science is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Animal Science is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Context: The most common way of pricing beef carcasses is through a price grid. Most processors make greater profit from higher-quality carcasses, which are those with higher meat yield and eating quality. Aims: The aim of this study was to calculate the value of diverse carcasses and compare pricing mechanisms on their ability to discriminate variation in meat yield and predicted eating quality. Methods: Hereford cross steer carcasses (153) were boned out to record saleable meat and yield. Six methods were used to calculate carcass price (AU$/kg). All were adjusted to the same average carcass value to allow comparisons, assuming that the overall payment does not change, but comparing the effect of having greater premiums and discounts. The six prices were based on a commercial grid, grid plus eating quality premium, yield of saleable meat only (constant price for all saleable meat), yield with eating quality premium, then the yield prices with optimum (quadratic) weight and fatness penalties based on grid optimums. Key results: Measurements of meat quality (eye muscle area and marble score) or saleable meat yield accounted for no variation in the grid price. However, measurement of yield accounted for substantial variation in prices calculated from yield and eating quality. Conclusions: The current grids do not encourage high-quality meat production and, assuming that yield and eating quality are important to processors, an actual measurement of yield is crucial to guide processing decisions (e.g. cutting plans) to maximise carcass value and feed market signals back to beef producers. Implications: Improved measurement of meat yield is required if carcass prices are to reflect carcass quality or the potential value captured. Six methods were used to calculate carcass price (AU$/kg). Measurement of yield accounted for substantial variation in prices calculated from yield and eating quality. This demonstrates that an actual measurement of yield is crucial to guide processing decisions to maximise carcass value and feed market signals back to beef producers. [ABSTRACT FROM AUTHOR]

Objective: This study was conducted to evaluate the correlation between body size traits, carcass traits, and primal cuts in Hanwoo steers. Methods: Sixty-one beef carcasses were classified for conformation and primal cut weight. Additionally, carcass weight, fat thickness, carcass dimensions, and longissimus muscle area were determined to complement the grading. Results: The average live weight and cold carcass weight were 759 and 469 kg, respectively. The mean carcass meat, fat, and bone proportions were 551, 298, and 151 g/kg, respectively. Primal cuts weights showed significant positive correlations (p<0.001) of 0.42 to 0.82 with live weight, carcass weight, and longissimus muscle area and a significant negative correlation with carcass fat (without shank, -0.38 to -0.10). Primal cut weights were positively correlated (p<0.01) with carcass length (0.41 to 0.77), forequarter length (0.33 to 0.57), 6th lumbar vertebrae-heel length (0.33 to 0.59), 7th cervical vertebrae carcass breadth (0.35 to 0.58), 5th to 6th thoracic vertebrae breadth (0.36 to 0.65), 7th to 8th thoracic vertebrae girth (0.38 to 0.63), and coxae girth (0.34 to 0.56) and non-significantly related to cervical vertebrae length and coxae thickness. Conclusion: There was a high correlation among live weight, carcass weight, longissimus muscle area, carcass length, 7th cervical vertebrae carcass breadth, 5th to 6th thoracic vertebrae breadth, and 7th to 8th thoracic vertebrae girth of the primal cuts yield. The correlation between fat and primal cut yields was highly significant and negative. Carcass length and 7th to 8th thoracic vertebrae girth, appear to be the most important traits affecting primal cut yields. [ABSTRACT FROM AUTHOR]

The objective of this study was to estimate variance components related to imprinting for carcass traits and physiochemical characteristics in Japanese Black cattle. The carcass records obtained from 4,220 Japanese Black feedlot cattle included carcass weight (CW), rib eye area (REA), rib thickness, subcutaneous fat thickness, and beef marbling score (BMS), and the physiochemical characteristics were fat, moisture, glycogen per proportion of moisture content, oleic acid, and monounsaturated fatty acids (MUFA). To detect gametic effects, an imprinting model was fitted. High additive heritabilities were estimated for all traits (from 0.516 for glycogen to 0.853 for fat) and were reduced in Mendelian heritability. The range of the differences was from 0.002 (CW) to 0.331 (fat and moisture), and the reductions were due to their imprinting variances. The ratio of the imprinting variance to the total additive genetic variance for REA (0.374), BMS (0.291), fat (0.387), moisture (0.388), and MUFA (0.337) were large (p < 0.05). These imprinting variances were due to the maternal contribution and suggested the existence of maternally expressed genomic imprinting effects on the traits in Japanese Black cattle. Therefore, maternal gametic effects should be considered in breeding programs for Japanese Black cattle. [ABSTRACT FROM AUTHOR]

Genomic imprinting should be considered in animal breeding systems to avoid lead in bias in genetic parameter estimation. The objective of this study was to clarify the effects of pedigree information on imprinting variances for carcass traits and fatty acid composition in Japanese Black cattle. Carcass records [carcass weight, rib eye area, rib thickness (RT), subcutaneous fat thickness and beef marbling score (BMS)] and fatty acid composition were obtained for 11,855 Japanese Black feedlot cattle. To estimate and compare the imprinting variances for the traits, two imprinting models with different pedigree information [the sire–dam gametic relationship matrix (Model 1) and the sire–maternal grandsire (MGS) numerator relationship matrix (Model 2)] were fitted. The ratio of the imprinting variance to the total additive genetic variance for RT (6.33%) and BMS (19.00%) was significant in Model 1, but only that for BMS (21.09%) was significant in Model 2. This study revealed that fitting the sire–MGS model could be useful in estimating imprinting variance under certain conditions, such as when restricted pedigree information is available. Furthermore, the present result suggested that the maternal gametic effects on BMS should be included in breeding programmes for Japanese Black cattle to avoid selection bias caused by imprinting effects. [ABSTRACT FROM AUTHOR]

In contrast to other international beef classification systems, the European EUROP system disregards marbling in meat quality assessment. Instead, it focuses primarily on the assessment of conformation and fat score. Due to the lack of more specific assessment, beef quality in Germany is less known than beef produced in other countries and is largely incomparable to international standards. The aim of this study was to explore the potential of video-image analysis (VIA) for the assessment of bull carcasses for the commercial beef market in Germany. Marbling scores and carcass traits of 170 carcasses were assessed at the 10th/11th and 12th/13th rib-eye sections of longissimus thoracis. Results showed that VIA is able to precisely assess marbling scores at a German cutting position with a close relation (r = 0.83) to the US position. Furthermore, carcass traits integral to the US Yield Grade, such as rib fat (mean 112 mm) and a modified trait of fat/meat ratio, were assessed at the 10th/11th rib-eye position in a process reliably corresponding to the US position (mean 98 mm). EUROP traits showed only weak relationships with marbling scores, VIA measured rib fat thickness, and carcass weights. Although complete validation of video image analysis requires further research with a higher number of test animals, VIA is a viable tool for classifying the variation of German beef carcasses more reliably during the slaughter line and it could valuably supplement EUROP classification traits. [ABSTRACT FROM AUTHOR]

Escherichia coli is part of the normal microflora of the intestinal tract of humans and warm-blooded animals, but its presence in raw material and food of animal origin is considered as fecal contamination and can be very dangerous for consumers. The determination of the number of E. coli in raw material and food is important because among them can be pathogenic strains. The most dangerous strains are considered enterohemorrhagic E. coli as a causative agent of severe bloody diarrhea and hemorrhagic uremic syndrome in humans through the production of Shiga-toxin, which is the main virulence factor, responsible for disease. The aim of this study was to identify the prevalence of Shiga toxin-producing strains of E. coli (STEC) from swabs of beef and swine carcass in slaughterhouses in Ukraine and characterize their genes, which are responsible for pathogenic properties. A total of 230 samples of swabs from beef (130) and swine (100) carcasses were obtained from 5 slaughterhouses in Ukraine between 2012 and 2015. Samples of swabs from carcasses were randomly selected at the final point of the process after the final washing of the carcass from the following areas: distal hind limb, abdomen (lateral and medial) from swine carcasses, brisket, flank and flank groin areas from beef carcasses. All samples were examined by culture-dependent method, after that each positive isolate of STEC was analyzed by multiplex PCR to detect the stx1, stx2, and eae genes. Out of 230 collected samples, seven (7.2%) were contaminated with STEC. The highest prevalence of STEC was found in swabs from beef carcasses (8.1%) in comparison to swabs from swine carcasses (5.7%). The stx1 gene was the predominant gene detected in all STEC positive samples. The eae gene was found in one of the examined isolates from beef carcass. Three isolates from swabs of beef carcass carried both stx1 and stx2 genes, one isolate showed association between stx1 and eae genes, one isolate was positive for stx1 gene only. In swabs from swine carcasses (2 isolates) stx1 and stx2 genes were presented simultaneously. The results of this study suggested that fresh raw meat could be a potential vehicle for transmission of the Shiga toxin-producing strain of E. coli to humans. This is the first report of STEC prevalence in beef and swine carcasses in Ukraine and these data will be valuable for microbiological risk assessment and help the appropriate services to develop strategies to mitigate health risk.

The phenotype of carcass traits in beef cattle are affected by random genetic and non-genetic effects, which both can be modulated by an environmental variable such as Temperature-Humidity Index (THI), a key environmental factor in cattle production. In this study, a multivariate reaction norm model (MRNM) was used to assess if the random genetic and non-genetic (i.e., residual) effects of carcass weight (CW), back fat thickness (BFT), eye muscle area (EMA), and marbling score (MS) were modulated by THI, using 9,318 Hanwoo steers (N = 8,964) and cows (N = 354) that were genotyped on the Illumina Bovine SNP50 BeadChip (50K). THI was measured based on the period of 15–45 days before slaughter. Both the correlation and the interaction between THI and random genetic and non-genetic effects were accounted for in the model. In the analyses, it was shown that the genetic effects of EMA and the non-genetic effects of CW and MS were significantly modulated by THI. No significant THI modulation of such effects was found for BFT. These results highlight the relevance of THI changes for the genetic and non-genetic variation of CW, EMA, and MS in Hanwoo beef cattle. Importantly, heritability estimates for CW, EMA, and MS from additive models without considering THI interactions were underestimated. Moreover, the significance of interaction can be biased if not properly accounting for the correlation between THI and genetic and non-genetic effects. Thus, we argue that the estimation of genetic parameters should be based on appropriate models to avoid any potential bias of estimates. Our finding should serve as a basis for future studies aiming at revealing genotype by environment interaction in estimation and genomic prediction of breeding values. [ABSTRACT FROM AUTHOR]

Background: Meat inspection is one of the essential tools for ensuring good quality and safe meat. The objective of this study was to evaluate carcass condemnation of cattle slaughtered in Oshana region, North of Namibia. Methods: In this 4-year retrospective study, causes, patterns, and economic implications of carcass condemnation of cattle slaughtered in Oshana region, North of Namibia were evaluated based on post-mortem inspection procedure. The SPSS software version 25 was used for statistical analysis. Results: Overall, 0.37% (120 out of 32 648) beef carcasses were condemned during the period of this study. The major causes of condemnation of carcasses were bruising (60 out of 120; 50%), followed by pus contamination. The condemnation rate in female cattle (65%) was significantly (p<0.05) higher than male cattle (35%). Overall, a significantly greater number (p<0.05) of carcasses were condemned in summer (74.2%) than in winter (25.8%). Conclusion: This study identified bruising, pus contamination, and cachexia as the major causes of bovine carcass condemnation in North of Namibia and showed that carcass condemnation rate varied with the year, season, and age. [ABSTRACT FROM AUTHOR]

The article evaluates the effects of the level and timing of feeding amino acid complexes of zinc and copper on the growth performance and carcass response of finishing steers fed with ractopamine hydrochloride. Topics discussed include the ingredient composition of basal finishing diet, chemical analysis of treatment diets, and treatments for hot carcass weight.

The castration of bulls increases the intramuscular fat (IMF) content in skeletal muscle. However, the biological processes of IMF accumulation in skeletal muscle after castration are not completely understood at the molecular level. This study examined the global transcriptomic changes in the longissimus thoracis muscle (LT) of bulls following castration using RNA sequencing (RNA‐Seq) and identified new genes or pathways associated with beef quality. Ten bulls and 10 steers castrated at 6 months of age were slaughtered at 26 and 32 months of age respectively. For transcriptome analysis, six LT samples from three bulls and three steers were selected based on age, carcass weight, carcass quantity and beef quality grades. Using RNA‐Seq, transcriptomic profiles of the LT were compared between bulls and steers. In all, 640 of the 18,027 genes identified through RNA‐Seq were differentially expressed genes (DEGs) between bulls and steers. Pathway analysis of these 640 DEGs showed significant (p <.05) changes in seven Kyoto Encyclopedia of Genes and Genomes pathways, and the most significant terms were complement and coagulation cascade pathways. The transcriptomic expression patterns of 10 genes in the complement and coagulation cascades were validated using all animals through quantitative real‐time polymerase chain reaction analysis. In conclusion, transcriptome changes associated with the complement and coagulation cascade pathways provide novel insights into understanding molecular mechanisms responsible for IMF accumulation following castration in beef cattle. [ABSTRACT FROM AUTHOR]

Slaughtering plants approved by the European Union have specific processes to guarantee that beef carcasses or halfcarcasses, of no less than eight months of age, are provided with health mark and then classified and identified according to the EU carcass classification grid. This classification is based on three criteria: i) Category, ii) Conformation (SEUROP) and iii) Fat Cover (FC). At the end of the classification process each carcass is given a code, consisting of two letters and a number: this operation is called Identification. The aim of our study was to evaluate how the European beef carcass quality classification is determined according to the experience of the personnel involved, then comparing the results with those yielded by the Android platform application. West Systems, through its West- Zootech division, has developed an Android platform application (SEUROP APP) that allows SEUROP and FC classification with a smart-phone. The photo taken with the smart-phone will yield the necessary angular parameters to determine the conformation class depending on the animal's muscular mass and based on the convexity of some areas on the half-carcass. It also evaluates the ratio between surface of lean tissue and total carcass surface in order to determine the fat cover and complete the classification. The SEUROP APP was able to obtain objective measurements for as much as 84% of the assessments made during the research and development phase. [ABSTRACT FROM AUTHOR]

The objectives of the study were to determine the effect of coated or noncoated hormone implants on growth performance, carcass characteristics, and serum estradiol-17β (E2) concentrations of Holstein steers fed a grain-based diet for 112 d. Seventy-nine Holstein steers [average initial body weight (BW) = 452 ± 5.5 kg] were stratified by BW and allotted to one of two treatments: 1) Holstein steers implanted with a coated implant containing 200 mg of trenbolone acetate (TBA) and 40 mg E2 (Revalor-XS (Merck Animal Health; Summit, NJ)] on day 0 (XS) or 2) Holstein steers implanted two times (days 0 and 56) with a noncoated implant containing 80 mg of TBA and 16 mg of E2 [(2IS) Revalor-IS (Merck Animal Health)]. Data were analyzed using the MIXED procedure of SAS (SAS Inst. Inc. Cary, NC). There was no effect (P ≥ 0.71) of implant strategy on initial, middle, and final BW. No effect (P ≥ 0.12) of implant strategy was observed on average daily gain, dry matter intake, or gain-to-feed ratio. There were no effects (P ≥ 0.11) of implant strategy on carcass characteristics. There was an implant × day interaction (P < 0.01) for the circulation of serum E2 concentrations. Serum E2 concentration increased similarly 14 d after Holstein steers were implanted, regardless of implant strategy. At 28 d, after steers were implanted, steers in the XS group had less serum E2 concentration than Holstein steers in the 2IS group. However, at 56 d after the first implantation, both groups, once again, had similar serum E2 concentrations and E2 concentrations were less on day 56 than day 28 for both strategies. Holstein steers implanted with 2IS had greater serum E2 concentration on day 70 and E2 concentrations remained greater than serum E2 of Holstein steers implanted XS for the duration of the trial (day 112). In summary, there was no effect of coated or two doses of noncoated implant on growth performance or carcass characteristics of Holstein steers. [ABSTRACT FROM AUTHOR]

This study aims to determine the presence of Staphylococcus aureus in the slaughter houses, the molecular typing of the isolates and the susceptibility of the isolates to the vancomycin antibiotic. The samples collected from cattle carcass, wall, knife, wastewater and cutting board from three different slaughterhouses in the Province of Nevşehir, in the scope of the study, were used as material. Fifty swab samples of 10 beef carcass surfaces, 10 wall surface, 10 blade surface, 10 cutting board surface and 10 waste water were taken from each slaughterhouse; a total of 150 swab samples were analyzed. The identification of the isolates was performed by phenotypic and molecular methods (PCR) following the isolation of the agents. The susceptibility of the isolates to vancomycin was tested by E test. In addition, genetic proximity of the isolates was investigated by Enterobacterial Repetitive Intergenic Consensus - PCR (ERIC-PCR). In this study, 150 isolates were obtained from 150 samples. 65 (43.3%) of these isolates were identified as coagulase positive staphylococci and 6 (4%) of 150 isolates were identified as S. aureus. All S. aureus isolates (susceptible: =2 µg / ml; moderately sensitive: 4-8 µg / ml; resistant: =16 µg / ml) were found to be susceptible to vancomycin. According to the ERIC-PCR analysis, isolates have been determined to be genotypically different. Special attention should be paid to hygiene conditions in slaughterhouses, both to prevent food poisoning and to improve carcass quality, and to extend the shelf life of red meat. Although it is pleasing that no resistance is detected as a result of our antimicrobial susceptibility test; unconscious use of antibiotics should be avoided, and their use should be kept under control. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the effect of Virginia fanpetals (Sida hermaphrodita) silage on carcass and beef quality characteristics. Forty Polish Holstein-Friesian bulls aged 16 months were assigned to 4 dietary treatments (n=10) and were fed different types of silage during a 7-month fattening period. The proportion (g/kg dry matter) of silage in the diets was as follows: (1) grass silage (GS) (600); (2) Sida silage (SS) (600); (3) SS (300) and GS (300); and (4) SS (300) and maize silage (MS) (300). Silage was supplemented with concentrate at 400 g/kg DM in each diet. The animals were slaughtered at the end of the fattening period. Silage type had no significant effect on BWG or feed to gain ratio. The carcasses of bulls fed Sida silage and maize silage received higher scores for conformation than the carcasses of bulls fed grass silage (P<0.05). The meat of bulls fed Sida silage had the lowest value of Warner-Bratzler shear force. Meat from SS+MS group bulls had the highest intramuscular fat (IMF) content and was lightest in color, whereas meat from bulls fed Sida silage and grass silage received the highest scores for color uniformity, aroma, taste and overall acceptability. [ABSTRACT FROM AUTHOR]

The slaughter value of cattle and beef quality are influenced by many factors, which can generally be divided into antemortem (breed, sex, age, housing system, diet, pre-slaughter handling) and postmortem (post-slaughter processing, chilling temperature, packaging). Studies of many authors have shown that meat quality traits can be also influenced by the individual genetic background of an animal. Numerous studies have been conducted worldwide to determine the functions of various genes as well as polymorphisms with potential effects on fattening and slaughter value of cattle and on beef quality. This study reviews the most important research done on the associations of polymorphisms in the calpain, calpastatin and myostatin genes with carcass traits and beef quality. Knowledge about the genes and chromosome regions associated with desired meat quality characteristics may prove very helpful when selecting pairs for mating and estimating the breeding value of offspring, mainly because it is difficult to improve meat quality traits based on conventional selection methods due to their low heritability and polygenic regulation. Furthermore, meat quality evaluation is expensive and can only be carried out after slaughter. [ABSTRACT FROM AUTHOR]

This study aimed to determine the frequency of contamination, serovar diversity, and multilocus sequence typing (MLST) of Salmonella enterica (SE) in lymph nodes and ground beef. A total of 1,545 samples from 400 beef carcasses were analyzed. Samples included peripheral (PLN) and deep lymph nodes (DLN), lean and fatty ground beef obtained in warm (April-July) and cold (September-December) seasons during 2017 and 2018. The pure isolates were subjected to complete genome sequencing. With these data, the in silico prediction of serovars and the MLST profile was performed. In total, 78 SE isolates were obtained (5% of the total analyzed samples). The frequency of contamination was associated with the type of sample (X2=23.7, P<0.0001) and the time of year (X2=20.3, P<0.0001), being higher in PLN (9.7%) and during the warm season (7.0%). The predominant serovars were Anatum and Reading (each one with n= 23), Typhimurium (n= 11), and London (n= 9). The MLST profile of strains of the Typhimurium (ST 19 and 34) and Kentucky (ST 198) serovars has been previously reported in isolates involved in clinical cases. It was concluded that lymph nodes and ground beef are reservoirs of SE of public health importance, especially during the warm months of the year. Therefore, it is necessary to establish measures to prevent dissemination throughout the production chain of strains associated with apparently healthy animals. [ABSTRACT FROM AUTHOR]

The purpose of the present research is to assess the position and tendency of the competitiveness of Mexican beef carcasses versus the foreign supply, as well as the relationship between this commercial advantage, the domestic production and exportation that may allow proposing strategies to enhance livestock production in the medium term. In order to meet this goal, four indicators of competitiveness were estimated based on the procedure set forth by the Interamerican Institute of Cooperation for Agriculture, and the degree of association between variables was determined using Pearson's coefficient. The volume of the primary supply of beef positions Mexico in the seventh place worldwide, while as an exporter country it occupies the fifteenth place. The exportation of beef was found to have as its main destination the market of the United States of America, and the domestic production has a low level of competitiveness in the international market. The behavior of the production and exportation of Mexican beef is influenced by factors linked to the characteristics of the market and of the commercial process, as well as with natural phenomena, which determine both the productivity and the generation of exportable surpluses of carcass meat and of value for the economy of the country. [ABSTRACT FROM AUTHOR]

Beef carcasses in Europe are classified on measures of carcass weight, conformation, and fat cover. These measurements provide the basis for payment to producers, with financial penalties for carcasses that do not conform to desirable characteristics. The objective of the present study was to identify animal-level factors associated with the achievement of a desirable carcass weight, conformation score, fat score, and age at harvest, as stipulated by Irish beef processors in accordance with the EUROP carcass classification system. The stipulated specifications were a EUROP conformation score ≥O=, a carcass weight between 270 and 380 kg, a EUROP fat score between 2+ and 4=, and an age at harvest ≤ 30 mo. In the present study, 59% of cattle failed to achieve at least one of these desired specifications. The logit of the probability of achieving the desired specifications was estimated using multivariable logistic regression and carcass data from 4,717,989 cattle finished and harvested in Ireland between the years 2003 and 2017. In comparison to beef-origin carcasses and after accounting for breed differences, the likelihood of dairy-origin carcasses achieving the desired age, conformation, fat, and weight specifications was 0.97, 0.88, 1.14, and 1.05, respectively. In comparison to heifer carcasses, the odds ratio (OR) of bull and steer carcasses simultaneously achieving all of the desired specifications (i.e. the overall specification) was 0.35 and 0.95, respectively. Additionally, after accounting for breed differences, heifers from the dairy herd were half as likely as heifers from the beef herd to achieve the overall specification, whereas the odds of dairy-origin bulls (OR = 3.46) and steers (OR = 2.41) achieving the overall specification was greater than that of their respective beef-origin counterparts. Finally, cattle with a greater breed proportion of Angus were most likely to achieve the overall specification. Results from the present study could provide a deeper understanding as to why animals fail to achieve desirable carcass specifications and could be implemented into the management decisions made on farm to ensure that the supply of beef carcasses that achieve the desired metrics is maximized. [ABSTRACT FROM AUTHOR]

Ultrasound technology provides cattle breeders with a quick, noninvasive, and inexpensive way to measure carcass data on live animals. Ultrasound data are used as indicator traits in cattle genetic evaluations for economically relevant carcass traits. Ultrasound cattle genetic evaluations assume homogeneous additive genetic and residual variance. Thus, the objective was to partition phenotypic variance in ultrasound carcass measurements into components for additive genetic effects, technicians, contemporary groups within technicians, and residual and to examine the homogeneity of these variances among image interpretation laboratories. Records of longissimus muscle area (LMA), percentage of intramuscular fat (IMF), and subcutaneous fat depth (SFD), measured using ultrasound, were provided by the American Angus Association (n = 65,967), American Hereford Association (n = 43,182), and American Simmental Association (n = 48,298). The data also included contemporary group, technician, imaging lab, and a three-generation pedigree for each animal. Variance components for ultrasound carcass measurements were first estimated with univariate animal models for each breed and imaging laboratory using derivative-free restricted maximum likelihood. Then, treating data from each imaging laboratory as separate traits, genetic correlations between laboratories for LMA, percentage of IMF, and subcutaneous fat were estimated with trivariate animal models. The technician explained 12–27%, 5–23%, and 4–26% of the variance for IMF, SFD, and LMA, respectively, across all three breeds. Variance due to technician was often greater than variance due to additive genetic effects but almost always less than that explained by the contemporary group. Within breeds, estimates of additive genetic variance for LMA, SFD, and IMF differed (range divided by mean) among laboratories by 4.5%, 21.5%, and 39.4 % (Angus); 31.6%, 15.0%, and 49.1% (Hereford); and 19.9%, 46.6%, and 55.3% (Simmental), respectively. Likewise, estimates of residual variance for LMA, SFD, and IMF differed among laboratories by 43.4%, 22.9%, and 43.3% (Angus); 24.9%, 15.2%, and 79.2% (Hereford); and 26.4%, 32.5%, and 46.2% (Simmental), respectively. Genetic correlations between labs across breeds ranged from 0.79 to 0.95 for IMF, 0.26 to 0.94 for SFD, and 0.78 to 0.98 for LMA. The impact of the observed heterogeneity of variance between labs on genetic evaluation requires further study. [ABSTRACT FROM AUTHOR]

The large difference between the producer price of a beef carcass and the retail prices of individual beef cuts has raised concerns among producers. These concerns are caused by the possibility of asymmetry in the market. This study examines the price transmission mechanisms in the beef market by comparing the weekly producer carcass price with a weekly calculated retail carcass price, instead of average retail prices, over a period of three years. It further estimates the causality links between the producer and retail prices. The traditional and standardised augmented Dickey–Fuller procedures were used to test for co-integration and asymmetry in price transmission. Four competing models, namely the Engle–Granger, threshold autoregressive (TAR), momentum threshold autoregressive (M-TAR) and momentum consistent TAR models, were applied. The results indicated that there is positive asymmetric price transmission between producer and retail price as retailers in the market respond quicker to shocks that squeeze their margin than those that stretch them. Market information was found to be flowing from the producer to the retailer. [ABSTRACT FROM AUTHOR]

In France, around 3.5 million cattle are slaughtered each year, which represents 1.3 million tons of beef carcasses. However, waste due essentially to organoleptic defects is estimated at 3.4% of the production or 45,000 tons of beef carcasses. Microbiological contamination and color are the two major causes of defect. In order to prevent color defect, a study was performed to develop a new method for measuring rapidly and instantly the redox potential as an indicator of color changes in carcasses without slowing down the slaughter line. This measurement would allow to classify them upstream according to their time of colors changes in order to sort them and to avoid food waste in the future. Meat juice has been shown to be a good mimetic medium for the study of color changes. The effect of different parameters was studied in order to fix experimental conditions. Color change is faster in the juice than in the meat and faster at 20 °C than at 4 °C. Redox potential allows following color changes and a symmetry has been highlighted between this thermodynamic measure and color changes. [ABSTRACT FROM AUTHOR]

The U.S. Department of Agriculture (USDA) yield grade (YG) equation is used to predict the retail yield of beef carcasses, which facilitates a more accurate payment for cattle when they are sold on a grid pricing system that considers carcass composition instead of body weight alone. The current USDA YG equation was developed over 50 yr ago. Arguably, the population of cattle used to develop the YG equation is different than the current diverse U.S. beef cattle supply today. The objectives of this manuscript are to promote the adoption and use of precision agriculture technologies (i.e. camera grading and electronic animal identification) throughout the U.S. beef supply chain as a means to enhance the ability of the USDA YG equation to more accurately predict the retail yield across the population of cattle that contributes to the current U.S. beef supply. Camera grading has improved the accuracy of determining beef carcass retail yield; however, the use of electronic animal identification would allow for additional information to be passed back and forth between the packer, cattle feeder, and producer. Information, such as sex, genetics, medical treatment history, diets consumed, and growth promotant administration, as well as other information could be used to create additional variables for a new augmented USDA YG equation. Herein, fabrication yields demonstrated a 5.6 USDA YG and 12.8% boneless closely trimmed retail cut difference between actual cutout measurements and calculated values from the USDA YG equation for Jersey-influenced cattle. Evidence of such disparities between calculated and actual values warrants a reevaluation of the USDA YG system and consideration for implementing advancements in precision agriculture to improve the prediction of beef carcass retail yield to more accurately account for the large amount of variation in beef carcass retail yield from the cattle in the United States. [ABSTRACT FROM AUTHOR]

Copyright of Eurasian Journal of Veterinary Sciences is the property of Eurasian Journal of Veterinary Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

More information on expected animal performance and carcass traits of forage-finished steers grazing warm-season annual forages is needed. To achieve this objective, a grazing trial was conducted in 2014, 2015, and 2016 (70, 63, and 56 d, respectively), with variation in length of grazing based on forage availability. Sixteen pastures (0.81 ha) were assigned to 1 of 4 forage treatments in a randomized complete block design. Forage treatments were brown midrib sorghum × sudangrass (BMR; Sorghum bicolor var. bicolor*bicolor var. sudanense), sorghum × sudangrass (SS), pearl millet [PM; Pennisetum glaucum (L.)R.Br.], or pearl millet planted with crabgrass [PMCG; Digitaria sanguinalis (L.) Scop.]. Each year, British-cross beef steers (n = 32; 3 y average: 429 ± 22 kg) were stratified by weight and randomly assigned to 1 of the 16 pastures for forage finishing. Each pasture was subdivided into two 0.405-ha paddocks for rotational stocking and a put-and-take stocking method was used to maintain a forage allowance of 116 kg forage dry matter/100 kg body weight (BW). Shrunk body weight and ultrasonically measured carcass composition were recorded at the initiation, middle, and end of each grazing season. Steers were harvested once forage availability became limited and chilled carcasses (24 h) were evaluated for yield grade and quality grade attributes. Statistical analysis was conducted using the GLIMMIX procedure in SAS 9.4 (Cary, NC) with main effects of treatment, year, and the interaction. Pasture and block were considered random effects while date was assessed as a main effect when applicable. Daily stocking densities were greater (P < 0.04) for SS than PMCG in the first 20 d of 2014 and 2015. Forage treatment did not affect (P > 0.17) total gain, total average daily gain, or body weight at any time point. Ultrasound composition traits of loin muscle area, 12th rib fat thickness, intramuscular fat, and rump fat were impacted (P < 0.01) by scanning date. No differences (P > 0.08) in forage treatments were observed for carcass characteristics associated with yield grade or quality grade. The findings suggest that forage-finished cattle during the summer months on BMR, SS, PM, and PMCG perform similarly, giving producers the option to use the most economical or practical forage type for their production system. [ABSTRACT FROM AUTHOR]

One hundred forty-four cull cows (body condition score = 2.10 ± 0.61; BW = 456 ± 47 kg) were organized into a 2 × 2 factorial design (48 pens, 12 pens/treatment, and 3 cows/pen) to evaluate the effect of dietary roughage level and oral drenching of Megasphaera elsdenii NCIMB 41125 (M. elsdenii culture; Lactipro Advance; MS Biotec Inc., Wamego, KS) on performance and carcass characteristics. Cattle were finished over a 42-day realimentation period, and aggressively stepped up over a 10-day period to either a high roughage finisher (HRF; 25% roughage) or a low roughage finisher (LRF; 10% roughage). Within diet, cattle were administered no probiotic or 100 mL of M. elsdenii culture (M. elsdenii NCIMB 41125, 2 108 cfu/mL) on day 0. No diet × probiotic interactions were detected (P ≥ 0.15), suggesting that the magnitude of the response was not influenced by the concentrate level of the diet. The main effect of diet triggered several significant responses. Decreasing roughage level tended to improve average daily gain (ADG) by 9.7% (0.26 kg, P = 0.08), while decreasing dry matter intake (DMI) by 0.9 kg (P = 0.09), provoking a 19.7% enhancement of feed efficiency (0.036 units, P < 0.01). However, interim data revealed declines of performance parameters among both diets with a significant difference between treatments only documented during the final phase of the realimentation period. During the final 14 days, LRF posted a 0.68 kg increase in ADG (P = 0.05) and a 2.0 kg decrease in DMI (P = 0.01), translating to improved feed efficiency (0.054 units, P = 0.03). This suggests that increasing the caloric density of finishing diets may help offset the regression of performance typically observed following a compensatory gain. No carcass traits were impacted by either diet or M. elsdenii culture (P ≥ 0.08). Overall, oral drenching of M. elsdenii culture tended to augment ADG (0.26 kg, P = 0.08) and carcass ADG (0.20 kg, P = 0.10). Implying that M. elsdenii culture was effective at alleviating the acidosis risk prompted by the rapid step-up period employed in the trial and may help capitalize on the narrow timeline of compensatory gain in cull cow realimentation. [ABSTRACT FROM AUTHOR]

Imaging technology can aid the automatic extraction of measurements from beef carcasses, which can be used for objective grading. Many abattoirs, however, rely on manual grading due to the required infrastructure and cost, making technology unfeasible. This study explores 3-dimensional (3D) imaging technology, requiring limited infrastructure, and its ability to predict carcass weight, conformation class and fat class for non-invasive, objective classification. Time-of-flight near-infrared cameras captured 3-dimensional point clouds of beef carcasses, on-line in one commercial abattoir in Scotland, over a 6-month period. Thirty-five 3D images were captured per carcass and processed using machine vison software. Seventy-four measurements were extracted from each point cloud. Removal of extreme outliers resulted in 285,109 datapoints for 17,250 carcasses. Coefficients of variation (CV) for each measurement on a per-animal basis were low and consistent, and measurements were averaged across images. Using a training and validation dataset (70:30), multiple linear regression models predicted EUROP conformation class, fat class, and carcass weight. Stepwise models included fixed effects (sex, breed type, kill date (and cold carcass weight for conformation and fat class)), and 3D image measurements. Including 3D measurements resulted in prediction accuracies of 70%, 50% and 23% for cold carcass weight, conformation, and fat class respectively. Mapping predictions on the traditional EUROP grid used in the UK showed that 99% of conformation classes and 93% of fat classes were classified within the correct or neighbouring grade. The results of this study indicate the potential for non-invasive, in-abattoir technology requiring limited infrastructure to predict carcass traits objectively. • Three-dimensional measurements (n = 74) were extracted from images of beef carcasses. • Linear regression models predicted EUROP grades and cold carcass weight (CCW). • Accuracies = 70%, 52% and 23% for CCW, conformation and fat class respectively. [ABSTRACT FROM AUTHOR]

From January to December 2016, Alberta Agriculture and Forestry (AAF) conducted a provincial survey of selected pathogens and indicator organisms on beef carcasses processed at Provincially Licensed Abattoirs (PLAs) in Alberta. The survey was conducted in seven small and medium scale slaughterhouses located in southern and northern Alberta that process beef cattle and cows. Paired samples were collected from the same carcass immediately after hide removal (pre-evisceration n = 401) and at pre-chill (n = 402) after application of a carcass wash and/or anti-microbial interventions. Swab samples were screened for the presence of Shiga toxin-producing Escherichia coli (STEC) O157:H7, six non-O157 STECs (O26, O45, O103, O111, O121 and O145), and Salmonella. In addition, samples were enumerated for indicator organisms (aerobic colony count (ACC), Enterobacteriaceae , coliforms, and generic E. coli). At pre-evisceration, 30 samples (7.4%) were confirmed positive for E. coli O157:H7; 13 samples (3.2%) were confirmed positive for non-O157 STEC; and 7 samples (1.7%) were confirmed positive for Salmonella. Pre-chill swabs had 21 samples (5.2%) positive for E. coli O157:H7, 16 samples (3.9%) positive for non-O157 STEC, and 1 sample (0.2%) positive for Salmonella. At pre-chill the prevalence of Salmonella was significantly lower (P < 0.05) than at pre-evisceration. For ACC, Enterobacteriaceae , coliforms and generic E. coli log means were significantly lower at pre-chill than pre-evisceration (P < 0.05). The level of ACC, generic E. coli , coliforms and Enterobacteriaceae showed a reduction of 0.3 log CFU/cm2, 0.5 log CFU/cm2, 0.5 log CFU/cm2 and 0.4 log CFU/cm2 respectively. • Indicators and selected pathogens on beef carcass were surveyed. • Prevalence of Salmonella decreased at pre-chill. • E. coli O157:H7 and non-O157 STEC at pre-chill were 5.22% and 3.98% respectively. • Levels of indicator organisms at pre-chill were lower than at post-hide removal. [ABSTRACT FROM AUTHOR]

There are no studies in the literature that comprehensively present the impact of factors related only to kosher slaughter on the content of minerals in beef. Therefore, learning the impact of such kosher determinants of beef as follows: no stunning during slaughter, cattle category, muscle, or the so‐called kosher treatment for mineral content in beef has an original character. In this connection, the aim of the research was a comprehensive analysis of the impact of kosher determinants (slaughter type, muscle, cattle category, and technological treatment) on the content of selected macro‐ and microelements in beef. On the content of minerals in muscles obtained from beef carcasses, the statistically significant (p < .05) impact was found in the case of slaughter type for such elements as: K, P, and Na. Higher content of phosphorus, potassium, and sodium was found in muscles of heifers and bulls from standard slaughter, compared with the amount of these elements determined in muscles of cattle from kosher slaughter. In turn, statistically significant (p < .05) impact of cattle sex was confirmed only in the case of iron and molybdenum content in beef. Higher amounts of these elements were determined in muscle from heifer carcasses (excluding the molybdenum content in MLT muscle of heifer carcasses from kosher slaughter). The process of koshering (soaking in brine) causes approximately 10‐fold increase in the amount of sodium in beef, regardless of the muscle or gender of cattle. The statistically significant impact of muscle was confirmed only in the case of zinc content. In the authors' own research, there was found no statistically significant impact of the interaction effects between the analyzed factors (S × G, S × M, G × M, and S × G × M) on the content of particular mineral components. [ABSTRACT FROM AUTHOR]

Pre-slaughter stress is well-known to affect meat quality of beef carcasses and methods have been developed to assess this stress. However, development of more practical and less invasive methods are required in order to assess the response of cattle to pre-slaughter stressors, which will potentially also assist with the prediction of beef quality. This review outlines the importance of pre-slaughter stress as well as existing and emerging technologies for quantification of the pre-slaughter stress. The review includes; i) indicators of meat quality and how they are affected by pre-slaughter stress in cattle, ii) contact techniques that have been commonly used to measure stress indicators in animals, iii) remotely sensed imagery techniques recently used as non-invasive methods to monitor physiological and behavioural parameters and iv) potential implementation of remotely sensed imagery data to perform contactless assessment of physiological measurements, which could be related to the pre-slaughter stress, as well as to the indicators of beef quality. Relevance to industry, conclusions and recommendations for research are included. [ABSTRACT FROM AUTHOR]

Age at slaughter (AS), carcass weight (CW), carcass daily gain (CDG), conformation (EUS), and rib-eye area (REA) were recorded on 1166 Piemontese young bulls. pH, lightness (L*), redness (a*), yellowness (b*), hue angle (h*), chroma (C*), purge loss (PL), cooking loss (CL) and shear force (WBSF) were assessed on the Longissimus thoracis muscle of the same animals. Heritability of carcass traits ranged from 0.07 (EUS) to 0.32 (CDG), with those of meat quality from 0.12 (PL) to 0.32 (WBSF). Genetically, an increase in AS exerts an unfavourable effect on PL (0.40) and colour traits (L*-0.20, a*-0.32, b* -0.25), whereas CW and CDG have the opposite effect. EUS is correlated favourably with PL (−0.32) and unfavourably with WBSF (0.53), while REA is correlated unfavourably with PL (0.41), CL (0.35), a* (−0.58) and b* (−0.44), and favourably with L* (0.41). Current selection goals of the Piemontese breed can indirectly modify some of the quality traits of beef, particularly colour and tenderness. • Carcass and beef quality traits are heritable in the Piemontese breed. • Genetic and phenotypic correlations among beef quality traits often differ. • Some quality traits are indirectly modified by selection for growth rate and muscularity. [ABSTRACT FROM AUTHOR]

The majority of foodborne illnesses associated with E. coli O157 are attributed to the consumption of foods of bovine origin. In this study, RNA-Seq experiments were undertaken with E. coli O157 to identify genes that may be associated with growth and survival on meat and the beef carcass at low temperature. In addition, the response of an E. coli O157 isolate representative of the general genetic 'type' found in Australia (E. coli O157:H− strain EC2422) was compared to that of a pathogenic clinical isolate (E. coli O157:H7 strain Sakai) not typically found in Australia. Both strains up-regulated genes involved in the acid stress response, cold shock response, quorum sensing, biofilm formation and Shiga toxin production. Differences were also observed, with E. coli O157:H7 Sakai up-regulating genes playing a critical role in the barrier function of the outer membrane, lipopolysaccharide biosynthesis, extracellular polysaccharide synthesis and curli production. In contrast, E. coli O157:H− EC2422 down-regulated genes involved in peptidoglycan biosynthesis and of the primary envelope stress response Cpx system. The unique gene expression profiles of the strains, indicate that these genotypes may differ in their ability to persist in the meat production environment and therefore also in their ability to cause disease. • E. coli O157 elicits a gene expression response that is specific to the meat matrix. • E. coli O157 exhibits a strain-specific gene expression response on meat. • E. coli O157 strains may differ in their ability to persist on meat and the carcass. [ABSTRACT FROM AUTHOR]

High‐quality grass silages may represent a mitigation option by reducing enteric methane production and by increasing productivity, thus reducing greenhouse gas emissions per kg of product (emission intensity). Two previous studies found considerable effects of three different silage qualities cut at different maturity stages (very early [H1], early [H2] and normal [H3]) offered ad libitum with various levels of concentrate supplementation, on animal performances of growing/finishing bulls and dairy cows in early lactation, indicating that emission intensities may also vary. Based on results from these previous studies, the aim of this study was to estimate emission intensities for milk and beef carcasses for the included combinations of silage qualities and concentrate levels, by using the farm‐scale model HolosNor. The emissions intensities were lowest for the H1 silage, and highest for the H3 silage, independent of concentrate levels for both milk and beef. Thus, increasing concentrate levels did not compensate for lower grass silage quality. Improvements in silage quality from H3 silage to H2 is realistic and has the potential to reduce emission intensities with approximately 10% while keeping the milk yield per cow constant and reducing the use of concentrates considerably. For beef production, the potential is even larger, with a reduction in emission intensity of approximately 17%. We conclude that improving grass silage quality may be a mitigation option that will also reduce the dependence on concentrates. [ABSTRACT FROM AUTHOR]

Antimicrobial treatments could help to decrease the transmission of microorganisms to beef carcasses and abattoir environments. The aim of this study was to evaluate the effectiveness of interventions in reducing Shiga toxin genes (stx 1 and stx 2) presence in a commercial abattoir. Intervention measures included the application of electrolytically generated hypochlorous acid to steer pens (experiment 1), chlorinated water, electrolytically generated hypochlorous acid, and isoclor to steer pens (experiment 2), electrolytically generated hypochlorous acid to knocking pens (experiment 3), and aqueous ozone and electrolytically generated hypochlorous acid onto beef carcasses (experiment 4). Detection of stx in samples was performed with BAX® System Real-Time PCR Assay. Our results showed that treatment with pressurized electrolytically generated hypochlorous acid and isoclor were effective to reduce stx presence from hides on steer pens. Although there is no single strategy to ensure the reduction of stx presence in a commercial abattoir, the combined application of several antimicrobial interventions would be ideal. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

• Heritabilities for carcass traits of beef cattle. • Breeding values of carcass traits according to residual feed intake. • Genetic trend of carcass traits in relation to different residual feed intake groups. Our objective was to verify if genetic differences (i.e., additive genetic variation) among animals classified in different residual feed intake adjusted for fat (RFI fat) groups occur, and if selecting for RFI fat impacts carcass traits. Ribeye area, backfat thickness, rump cap (' picanha ' in Brazilian Portuguese) fat thickness, subcutaneous fat thickness, and marbling score were evaluated in relation to the high, medium and low RFI fat groups. Tri-trait analyses were performed using the animal model. The estimated values for heritability were high and no difference was found between the obtained values according to the RFI fat groups, for any of the carcass traits evaluated. These results demonstrate that all traits evaluated in this study have the potential for genetic improvement, regardless of RFI fat classification. The genetic improvement capacity of the herd was confirmed by the genetic trends performed using the breeding value of each RFI fat group, and independently of the group a bull belongs. Therefore, regardless of whether the animals are more or less efficient in terms of RFI fat , it is possible to practice selection for RFI fat in conjunction with carcass traits. [ABSTRACT FROM AUTHOR]

Abstract Previous research showed that meat of optimal tenderness is produced when rigor mortis temperature falls between 12 − 35 ° C. This study aimed to classify beef carcasses quality according to the ideal window rule using pH/temperature decay descriptors and animal characteristics. Seventy-four Mirandesa breed and 52 Crossbreds, with an average age of 10.1 ± 2.32 months, were slaughtered at one abattoir located in the Northeast of Portugal. Carcass temperature and pH, logged during 24 h post-mortem, were modelled by exponential decay equations that estimated temperature (k T) and pH (k pH) decay rates. Additionally, other pH/temperature descriptors were estimated from the fitted models. From linear models adjusted to each descriptor, it was found that hot carcass weight, age, breed, gender, age class, fat cover, conformation and transport and lairage time had influence (P < 0.05) on pH and temperature decay rates. Thus, combining the variables k T and k pH , and selected animal/carcass characteristics as linear predictors, a system to classify quality of carcasses was developed. [ABSTRACT FROM AUTHOR]

Introduction. The purpose of the study was to quantify the impact of packaging type, storage temperature, and length of postmortem aging to consistently increase palatability and color stability of Longissimus lumborum (LL) and TBmuscles that represent the bulk of today’s supply. Materials and methods. Paired longissimus lumborum (LL) and triceps brachii (TB) muscles were selected from 27 and 54 A-maturity beef carcasses with marbling scores of Slight 50 to Small 50 at grading. One muscle from each pair was stored at 0 and 4 °C, respectively, for 21, 32, or 42 days for LL, and 21, 28, or 35 days for TB, in one of three packaging options; DryBag®, traditional vacuum-bag, or no bag. Result and discussion. Saleable yields were similar forDryBag®and traditional dry agedsubprimals. Aging temperature and packaging type had little impact on any quality parameters evaluated. Steaks from LL muscles aged for 42 days had lower shear force values and more tender trained sensory panel values than steaks from LL aged for 21 days, although the actual difference was marginal. Tenderness of steaks from TB muscles was similar regardless of aging. Length of aging had more influence on saleable yields than palatability, and storage temperature and packaging had little influence on either. Conclusion. Traits measured from subprimals aged in a DryBag® were similar to traditional dry aging. Packaging (vacuum vs. non) had a slight influence on palatability. Storage temperature (0 vs. 4 °C) had little impact on any trait evaluated. Length of aging (21 to 42) had more influence on cutting yields than palatability. [ABSTRACT FROM AUTHOR]

Abstract Internationally, different Video Image Analysis Systems (VIAS) are established to enable categorization of beef carcasses according to a marbling score as determining part of trading categories. Different established standardized cutting positions of longissimus thoracis , among other reasons, hamper the use of VIAS in European countries. The objective of the study was to explore the potential of a VIAS-based grading system VBG 2000 for the estimation of marbling of carcasses cut according to German standards. The correlation coefficient between the camera assessed marbling scores (n = 354 halves of carcasses) at the 10th rib section at the left and right side achieved 0.89 (P <.01) and 0.80 (P <.01) for camera assessed marbling scores between the right 12th/13th and 10th/11th rib interface of longissmus thoracis. Thus, modification of the cut position towards the US standard provides comparable results, and assessing VIA based marbling scores at the 10th rib is correlated to the 12th rib. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the efficacy of different antimicrobial interventions applied via either conventional spray (CS) or handheld electrostatic spray (ESS) to reduce Shiga toxin–producing Escherichia coli (STEC) on fresh beef surfaces. Hot-boned outside rounds (ORs) were inoculated within 1 h after harvest with a cocktail of eight isolates consisting of 8 O157 and non-O157 serogroups of STEC (STEC8). ORs were hung on sterile meat hooks at 4°C for 36 h to simulate a contaminated full carcass side in the chiller. ORs were then treated with lactic acid (LA; 4.5%, w/v), 3.0% lauric arginate ester (LAE), 0.8% cetylpyridinium chloride, 200 mg/L peracetic acid, 3 mg/L chlorine dioxide, 5 mg/L ClO2, or tap water by using CS or ESS. Temperatures of LA and peracetic acid were set at 55 and 42°C before spraying, whereas all other solutions were applied at room temperature (25°C). Pretreatment and posttreatment STEC8-inoculated beef tissue samples were aseptically collected to evaluate the efficacy of interventions by application method (CS or ESS). LA applied with CS achieved the greatest reduction in STEC8 numbers (3.3 log CFU/cm2) compared with all other treatments: 0.2 log CFU/cm2 (tap water) to 2.3 log CFU/cm2 (LAE). Only for LA did a significant difference arise in mean STEC8 reductions between CS and ESS applications (3.2 versus 1.7 log CFU/cm2, respectively). Among the treatments applied with ESS, LAE produced the greatest reduction of STEC8. Antimicrobial interventions applied via conventional wand or cabinet-applied technologies can reduce the O157 and non-O157 STEC on fresh beef carcass surfaces, reducing transmission to beef consumers. [ABSTRACT FROM AUTHOR]