Search

This chapter introduces the development of the polymerase chain reaction (PCR) and its modifications that enabled the development of in-situ PCR and its successful application in localizing RNA and DNA targets. We provide detailed descriptions of methods and materials for successful demonstration of rabies virus (RABV) nucleic acid by in-situ PCR. The essential components of this topic include sample preparation, including care during pre-treatment, in-situ reverse transcription (RT) PCR amplification, and detection of target genes. The parameters pertaining to critical steps in the procedure are discussed.

This chapter describes a single-cell whole genome amplification method (WGA) that has been originally published under the name "Single Cell Comparative Genomic Hybridization (SCOMP)" (Klein et al., Proc Natl Acad Sci U S A 96(8):4494-4499, 1999). The method has recently become available commercially under the name "Ampli1(™) WGA Kit." It is a PCR-based technique for whole genome amplification (WGA) allowing comprehensive and quite uniform amplification of DNA from low quantities of input DNA material, in particular single cells. The method is based on a ligation-mediated adaptor linker PCR approach. In contrast to other PCR-based WGA approaches, both the primer design and mechanism underlying the fragmentation of genome are nonrandom, enabling high priming efficiency and deterministic fragmentation of template DNA. This is particularly important for the design of (diagnostic) assays targeting specific loci. Here, we describe the WGA protocol for amplification of single-cell genomes designed to provide high-quality material in quantity sufficient for a number of locus-specific and genome-wide downstream assays [e.g., targeted Sanger sequencing, restriction fragment length polymorphism (RFLP), quantitative PCR (qPCR), and array comparative genomic hybridization (CGH)].

Since the development of the polymerase chain reaction (PCR) in the 1980s our knowledge of environmental microbial diversity and function has increased greatly. However quantification of particular environmental microbes by “end-point PCR” techniques has typically been inaccurate due to inherent limitations and biases introduced during amplification. Such problems were overcome in the 1990s following the development of “real-time PCR” methods that employ highly sensitive fluorescent detection chemistries that allow quantification of PCR amplicons during the exponential phase of the reaction as each cycle occurs (i.e., in real time). Real-time PCR is now widely employed for measuring 16S rRNA and functional gene abundance and expression in the environment, has been used in numerous studies of hydrocarbon-degrading bacteria, and the technique has promising possibilities as a tool for assessing hydrocarbon-contaminated environments and monitoring natural attenuation or bioremediation techniques. This chapter looks at the kinetics of PCR to explain the benefits of real-time PCR over traditional end-point PCR, and discusses the most popular detection chemistries and how they allow accurate quantification. Guidelines are provided for the design of real-time PCR primers and probes, and detailed protocols are given for both TaqMan and SYBR Green assays for quantifying gene abundance, as well as a two-step reverse transcription real-time PCR protocol for quantifying gene expression.

Biological evidence has become invaluable in the crime laboratory; however, it may exist in limited quantity and/or quality. Given this, the ability to amplify total DNA obtained from evidence, in an unbiased manner, would be highly advantageous. Methods for whole genome amplification (WGA) have the potential to fulfill this role, resulting in a virtually unlimited supply of DNA. In the research presented, two WGA methods, improved primer extension preamplification and multiple displacement amplification (MDA), were tested using commercial kits. Control DNA, artificially degraded DNA, and DNA from fresh blood, aged blood, hair shafts, and aged bones underwent WGA, followed by short tandem repeat and mitochondrial DNA analysis. The methods did amplify DNA, but performed poorly on forensically relevant samples; the maximum amplicon size was reduced, and MDA often resulted in extraneous bands following polymerase chain reaction. Taken together, WGA appears to be of limited forensic utility unless the samples are of a very high quality.

Multiplex Polymerase chain reaction (PCR) is the term used when more than one pair of primers is used in a polymerase chain reaction. The goal of multiplex PCR is to amplify several segments of target DNA simultaneously and thereby to conserve template DNA, save time, and minimize expense. The success of the experiment is dependent on primer design. However, this can be a dreary task as there are many constrains such as melting temperatures, primer length, GC content and complementarity that need to be optimized to obtain a good PCR product. In our investigations, we found few primer design tools for multiplex PCR and there was no suitable tool for our partners who want to use a multiplex PCR genotypic assay. The tool draws on a genetic algorithm where stochastic approaches based on the concept of biological evolution, biological genetics and genetic operations on chromosomes are used to find an optimal solution for multiplex PCR. The presented experimental results indicate that the proposed algorithm is able to find a set of primer pairs that not only obey the design properties but also work in the same tube.

DNA microarray technology has been increasingly applied for studies of clinical samples. Frequently, RNA probes from clinical samples are available in limited amounts. We describe a reliable amplification method for bacterial RNA. We verified this method on mycobacterial RNA applying mycobacterial genome-directed primers (mtGDPs). Glass slide-based oligoarrays were employed to assess the quality of the amplification method. We observed a relatively small bias in amplified RNA pool when compared to the unamplified one. Up to 1000-fold linear RNA amplification in a single amplification round was obtained. To our knowledge, this study describes the first amplification method for mycobacterial RNA.

The polymerase chain reaction (PCR) with registration of DNA accumulation in the course of the reaction (in real time) has gained increasing acceptance as a laboratory technique suitable for both scientific and diagnostic purposes. The registration of DNA accumulation during the reaction makes it possible to avoid separating the readout stage, as well as rules out the possibility of laboratory contamination; in addition, the results obtained allow nucleic acids to be analyzed quantitatively as well as qualitatively [1]. Such tasks as assessment of the level of transcript representation and pathogen concentration and detection of single-nucleotide polymorphisms (SNPs) are accomplished much easier if a real-time PCR is used [2‐7].

Nucleic acid sequence-based amplification (NASBA) is a sensitive transcription-based amplification system that uses a battery of three enzymes (avian myeloblastosis virus reverse transcriptase, RNase H and T7 RNA polymerase) leading to a main amplification product of single-stranded RNA, and is specifically designed for the specific detection of RNA. NASBA is an established diagnostic tool in clinical use, with a theoretically bigger analyti- cal sensitivity than reverse transcription-polymerase chain reaction (RT-PCR) for pathogen detection, but is not progressing toward implementation in food analysis. This is unfortunate, because it has a potential for detection of viable cells through selective amplification of messenger RNA, even in a background of genomic DNA, which PCR does not possess. However, in some instances, an unexpected amplification of genomic DNA has been observed using the NASBA technique. The availability of methods for rapid, sensitive and selec- tive detection of viable microbial pathogens in foods is a goal worth pursuing

We describe a polymerase chain reaction (PCR) protocol suitable for use in secondary schools and colleges. This PCR protocol can be used to investigate genetic variation between plants. The protocol makes use of primers which are complementary to sequences of nucleotides that are highly conserved across different plant genera. The regions of chloroplast DNA amplified lie between these conserved sequences and are non-coding. These non-coding regions display a high frequency of mutations and show relatively high rates of evolutionary change. Thus it is possible to use the protocol to explore evolutionary relationships between plants. Results from Brassica oleracea can be used to highlight genetic similarity and differences within and across genera. The protocol is robust and is suitable for use either with a thermocycler or a series of water-baths, thus making it accessible for use in most schools and colleges.

Polymerase chain reaction (PCR) has become a fundamental technique in molecular biology. Nonetheless, further improvements of the existing protocols are required to broaden the applicability of PCR for routine diagnostic purposes, to enhance the specificity and the yield of PCRs as well as to reduce the costs for high-throughput applications. One known problem typically reported in PCR experiments is the poor amplification of GC-rich DNA sequences. Here we designed and tested a novel effective and low-cost PCR enhancer, a concentration-dependent combination of betaine, dithiothreitol, and dimethyl sulfoxide that broadly enhanced the quantitative and/or qualitative output of PCRs. Additionally, we showed that the performances of this enhancer mix are comparable to those of commercially available PCR additives and highly effective with different DNA polymerases. Thus, we propose the routine application of this PCR enhancer mix for low- and high-throughput experiments.

Polymerase chain reaction (PCR) is an essential part of research based on genomics or cell analysis. The development of a microfluidic device that would be suitable for high-temperature-based reactions therefore becomes an important contribution towards the integration of micro-total analysis systems (muTAS). However, problems associated with the generation of air bubbles in the microchannels before the introduction of the assay liquid, which we call the "initial start-up" in this study, made the flow irregular and unstable. In this report, we have tried to address these problems by adapting a novel liquid-flow method for high-temperature-based reactions. A PDMS-based microfluidic device was fabricated by soft-lithography techniques and placed on a cartridge heater. The generation of the air bubbles was prevented by introducing the fluorinated oil, an inert and highly viscous liquid, as the cap just before the introduction of the sample solutions into the microchannels. The technique was applied for continuous-flow PCR, which could perform PCR on-chip in a microfluidic system. For the evaluation of practical accuracy, plasmid DNA that serves as a reference molecule for the quantification of genetically modified (GM) maize was used as the template DNA for continuous-flow PCR. After PCR, the products were collected in a vial and analyzed by gel electrophoresis to confirm the accuracy of the results. Additionally, quantitative continuous-flow PCR was performed using TaqMan technology on our PCR device. A laser detection system was also used for the quantitative PCR method. We observed a linear relationship between the threshold cycle (Ct) and the initial DNA concentration. These results showed that it would be possible to quantify the initial copies of the template DNA on our microfluidic device. Accurate quantitative DNA analysis in microfluidic systems is required for the integration of PCR with muTAS, thus we anticipate that our device would have promising potential for applications in a wide range of research.

Aptamers are DNA oligonucleotides capable of binding different classes of targets with high affinity and selectivity. They are particularly attractive as affinity probes in multiplexed quantitative analysis of proteins. Aptamers are typically selected from large libraries of random DNA sequences in a general approach termed systematic evolution of ligands by exponential enrichment (SELEX). SELEX involves repetitive rounds of two processes: (i) partitioning of aptamers from non-aptamers by an affinity method and (ii) amplification of aptamers by the polymerase chain reaction (PCR). New partitioning methods, which are characterized by exceptionally high efficiency of partitioning, have been recently introduced. For the overall SELEX procedure to be efficient, the high efficiency of new partitioning methods has to be matched by high efficiency of PCR. Here we present the first detailed study of PCR amplification of random DNA libraries used in aptamer selection. With capillary electrophoresis as an analytical tool, we found fundamental differences between PCR amplification of homogeneous DNA templates and that of large libraries of random DNA sequences. Product formation for a homogeneous DNA template proceeds until primers are exhausted. For a random DNA library as a template, product accumulation stops when PCR primers are still in excess of the products. The products then rapidly convert to by-products and virtually disappear after only 5 additional cycles of PCR. The yield of the products decreases with the increasing length of DNA molecules in the library. We also proved that the initial number of DNA molecules in PCR mixture has no effect on the by-products formation. While the increase of the Taq DNA polymerase concentration in PCR mixture selectively increases the yield of PCR products. Our findings suggest that standard procedures of PCR amplification of homogeneous DNA samples cannot be transferred to PCR amplification of random DNA libraries: to ensure efficient SELEX, PCR has to be optimized for the amplification of random DNA libraries.

Background Circularizable oligonucleotide probe (C-probe) is a unique molecule that offers significant advantages over conventional probes. Methods Closed circular structure can be formed through ligation of the juxtaposed ends of the C-probe after hybridization with a target, and subsequently locked onto its target through the helical turns formed between the complementary sequences of the target and the C-probe (padlock probe). Under isothermal condition, C-probe can be amplified by rolling circle amplification (RCA) to generate multimeric single-stranded DNA (ssDNA). This multimeric ssDNA can be further amplified by a ramification mechanism (RAM) through primer extension and downstream DNA displacement, resulting in an exponential amplification. Usually, an unbiased product is generated by either RCA or ramification amplification method (or RAM) due to the generic primers of C-probe and its localization onto DNA targets. Conclusions These advantages make C-probe amplification very useful for research and molecular diagnosis, especially in areas where other techniques were proved to be inadequate. The development of C-probe-based technologies offers a promising prospect for molecular diagnosis. The applications of C-probe, RCA, RAM, in situ detection, microarray, immunoassay, single nucleotide polymorphism, and whole genome amplification, etc. are discussed in this review.

The muriqui (Brachyteles) is one of the most endangered primates in the world, however little is known about the viability of the remaining populations. We evaluated the technique of extracting DNA from wild muriqui feces for PCR applications. In order to determine the effect of the DNA in subsequent amplifications, we analyzed five different extracts. The importance of the recommended BSA and the HotStarTaq DNA polymerase was tested. The minimal conditions to successfully amplify highly degraded fecal DNA were determined, showing that the recommended reagents are not required. We envision that this method may be useful in further conservation management studies.

Nucleic acid amplification techniques have revolutionised diagnostic and research industries. Current technologies that allow the detection of amplification in real-time are fast becoming industry standards, particularly in a diagnostic context. In this review, we describe and explore the application of numerous real-time detection chemistries and amplification techniques for pathogen detection and identification, including the polymerase chain reaction, nucleic acid sequence-based amplification, strand displacement amplification and the ligase chain reaction. The emergence of newer technologies, such as lab-on-a-chip devices and photo-cleavable linkers, is also discussed.

The polymerase chain reaction (PCR) is a valuable tool in the laboratory. PCR enables an investigator to amplify specific DNA and subsequently view the results of the amplification. There are many potential uses for PCR: forensics; identification of genetically inherited diseases; screening of genetically modified organisms; and classification and diagnosis of problematic, small tissue samples.Performing PCR on paraffin-embedded human tissues presents challenges. Fixation, microtomy, DNA extraction, master mix preparation, amplification, and gel electrophoresis are all intricate parts of the PCR process. This report outlines reliable, reproducible methods for achieving accurate PCR results on fixed, routinely processed, paraffinembedded human tissues. (The J Histotechnol 28:219, 2005)Submitted August 24, 2005; accepted with revisions September 28, 2005

Current DNA isolation methods have limitations between speed and purity in high-throughput molecular genetic analysis such as gene mapping and marker-assisted selection programs. We have optimized a simple and rapid method for isolating high-quality genomic DNA from rice that significantly minimizes time and the use of laboratory materials. One person can process as many as 384 samples in 2 h. The isolated DNA is suitable for polymerase chain reaction-based techniques and is stable for no less than 6 mo of storage at 4°C.

The real-time reverse transcription polymerase chain reaction (RT-PCR) uses fluorescent reporter molecules to monitor the production of amplification products during each cycle of the PCR reaction. This combines the nucleic acid amplification and detection steps into one homogeneous assay and obviates the need for gel electrophoresis to detect amplification products. Use of appropriate chemistries and data analysis eliminates the need for Southern blotting or DNA sequencing for amplicon identification. Its simplicity, specificity and sensitivity, together with its potential for high throughput and the ongoing introduction of new chemistries, more reliable instrumentation and improved protocols, has made real-time RT-PCR the benchmark technology for the detection and/or comparison of RNA levels.

One of the major applications of real time polymerase chain reaction (PCR) is relative quantification, where the expression of a target gene is determined as a ratio to a stably expressed reference gene, the so-called housekeeping gene. Glyceraldehyde-3-phosphate dehydrogenase (GAPD) is a glycolytic enzyme, which is active in all mammalian tissues and is frequently used as housekeeping gene in expression studies. The functional locus maps to human chromosome 12p13, but several GAPD-related sequences, including processed pseudogenes, GenBank homologous sequences and computationally predicted sequences are present along the human genome. Due to the high level of GAPD-related sequences it is very important to avoid genomic DNA amplification when GAPD is used as endogenous control in mRNA quantification. We have outlined a GAPD couple of primers that avoid any genomic DNA amplification for real time reverse transcription PCR applications by SYBR-Green Dye. These new designed primers are an useful and chip alternative to probe technologies, and can carry out specific and reproducible data in mRNA expression studies.

In vitro diagnostics has many different disciplines. Histology tests are classic for diagnosis, followed by chemistry and serology tests. The newest in vitro diagnostic tools are molecular. These clinical tests are used to determine therapy type, duration, and dose; they are also used to determine if therapy has been successful. The choice of test depends upon the question being asked. As molecular diagnostics has evolved, it has demonstrated clear advantages over some traditional methods, although it does not completely replace other methods. Molecular methods are extremely sensitive, which is critical for the direct detection of viral nucleic acids. When a pathologist states that patients have undetectable virus, that does not mean that they have no virus in their systems. It means that the level of virus is below the limits of detection for the assay used. A robust and sensitive assay can provide more useful information. Other advantages are that molecular assays often require minimal sample volumes and do not require culture. Molecular methods can be very accurate, as they measure DNA or RNA sequences specific for the virus or mutation of interest. Finally, molecular diagnostics usually offers tremendous time savings in the laboratory, allowing clinicians earlier access to data and thus earlier treatment for patients. Nucleic acid amplification is the key to molecular diagnostics. A molecular test for a virus must detect a specific RNA or DNA sequence in the midst of a tremendous amount of other nucleic acids: human genomic DNA, mRNA, bacterial DNA, and RNA. This process is like pulling the proverbial needle out of the haystack. The power of a nucleic acid amplification technique is that it can amplify a specific sequence and do so in a predictable manner so that the number of molecules in the initial sample can be quantified. Polymerase chain reaction (PCR) is the gold standard for amplification processes in diagnostics. Since the technique was first published in 1985 (1), it has become the most widely used nucleic acid amplification technology. With PCR, a target sequence of nucleic acid is amplified through a repetitive series of reactions catalyzed by a single enzyme, a thermal stable nucleic acid polymerase. PCR can amplify both DNA and RNA. The process of PCR typically involves taking the sample through three different temperatures, each of which causes a different event. The sample is placed into a tube with the proper primers, thermal stable polymerase, nucleotides, and buffers. In the first step, denaturation by heating to 95°C causes the double-stranded DNA to form single strands. In the second step, the temperature is dropped to 55°C to 60°C, which allows the target specific primer to bind to only the intended nucleic acid sequence. The specificity of an assay depends on the quality of primer choice. Finally, in a third step, the temperature of the reaction is raised to about 72°C and the polymerase synthesizes an identical copy of the target sequence, called an amplicon. The cycle is repeated many times through the three different temperatures. Everything occurs rapidly in a closed tube in a thermocycling instrument. PCR causes exponential amplification of a target nucleic acid region. Starting with 1 copy of a molecule leads to 16 amplicons after 4 cycles. Starting with 2 copies leads to 32–4 copies after the first cycle, 8 after the second cycle, 16 after the third cycle, and finally 32 after the fourth. Clinicians do not know how many copies are present in a sample but use the result to extrapolate back. If they found 96 amplicons after 4 cycles, they could de-termine that the sample had 6 copies initially. Instrumentation now allows this to be done automatically. Roche has developed a portfolio of PCR business units based on disease areas. In six areas, an expertise is already present: virology, women's health, genomics, microbiology, blood screening, and oncology. This article discusses applications of molecular diagnostics in these fields.

Agrobacterium-mediated genetic transformation is a method of choice for the development of transgenic plants. The presence of latentAgrobacterium that multiplies in the plant tissue in spite of antibiotic application confounds the results obtained by polymerase chain reaction (PCR) analysis of putative transgenic plants. The presence ofAgrobacterium can be confirmed by amplification of eitherAgrobacterium chromosomal genes or genes present out of transfer DNA (T-DNA) in the binary vector. However, the transgenic nature ofAgrobacterium-contaminated transgenic plants cannot be confirmed by PCR. Here we report a simple protocol for PCR analysis ofAgrobacterium-contaminated transgenic plants. This protocol is based on denaturation and renaturation of DNA. The contaminating plasmid vector becomes double-stranded after renaturation and is cut by a restriction enzyme having site(s) within the PCR amplicon. As a result, amplification by PCR is not possible. The genomic DNA with a few copies of the transgene remains single-stranded and unaffected by the restriction enzyme, leading to amplification by PCR. This protocol has been successfully tested with 4 different binary vectors and 3Agrobacterium tumefaciens strains: EHA105, LBA4404, and GV3101.

Since the introduction of the polymerase chain reaction the presence of contaminating bacterial DNA in the Taq polymerase preparations has hampered the use of this technique in microbiology. Lately, this inconvenience has equally impeded gene quantification in the field of cell or gene therapy, where bacterial genes such as LacZ are often used as tags to detect vectors or cells after their injection in the recipient organism. Several means to overcome the DNA contamination of Taq Polymerase have been reported with variable degrees of decontamination efficiency and alteration of the PCR reaction. Here we propose two protocols to efficiently quantify DNA or RNA from the LacZ gene by real-time PCR using either decontamination by low concentrations of DNAse I prior to PCR amplification or a highly purified Taq Polymerase which is devoid of detectable contamination.

The optimizing and controlling for polymerase chain reactions (PCRs) requires standard target sequences to measure reaction specificity and to obtain accurate gene quantification. However, defined target sequences are often not readily available. This situation is particularly evident in the study of rare splice variant transcripts. For gains in efficiency and reaction speed, a small size of PCR amplicon typifies real-time PCR formats, including hydrolysis probes. This study demonstrates the use of oligonucleotides resembling one strand of complete amplicon sequences used in real-time PCR to provide sustainable and precise amounts of the target sequence without the necessity of enlisting nucleic acid cloning procedures. The application of template oligonucleotides is modeled using all of the splice variant forms of human vascular endothelial growth factor.

Despite recent advances in linear whole genome amplification of intact DNA/RNA, amplification of degraded nucleic acids in an unbiased fashion remains a serious challenge for genetic diagnosis. We describe a new whole genome amplification procedure, RCA–RCA (Restriction and Circularization-Aided Rolling Circle Amplification), which retains the allelic differences among degraded amplified genomes while achieving almost complete genome coverage. RCA–RCA utilizes restriction digestion and whole genome circularization to generate genomic sequences amenable to rolling circle amplification. When intact genomic DNA is used, RCA–RCA retains gene-amplification differences (twofold or higher) between complex genomes on a genome-wide scale providing highly improved concordance with unamplified material as compared with other amplification methodologies including multiple displacement amplification. Using RCA–RCA, formalin-fixed samples of modest or substantial DNA degradation were successfully amplified and screened via array-CGH or Taqman PCR that displayed retention of the principal gene amplification features of the original material. Microsatellite analysis revealed that RCA–RCA amplified genomic DNA is representative of the original material at the nucleotide level. Amplification of cDNA is successfully performed via RCA–RCA and results to unbiased gene expression analysis (R2 = 0.99). The simplicity and universal applicability of RCA–RCA make it a powerful new tool for genome analysis with unique advantages over previous amplification technologies.

Preimplantation genetic diagnosis (PGD) of single gene defects following assisted conception typically involves removal of single cells from preimplantation embryos and analysis using highly sensitive PCR amplification methods taking stringent precautions to prevent contamination from foreign or previously amplified DNA. Recently, whole genome amplification has been achieved from small quantities of genomic DNA by isothermal amplification with bacteriophage 29 DNA polymerase- and exonuclease-resistant random hexamer primers. Here we report that isothermal whole genome amplification from single and small numbers of lymphocytes and blastomeres isolated from cleavage stage embryos yielded microgram quantities of amplified DNA, and allowed analysis of 20 different loci, including the DeltaF508 deletion causing cystic fibrosis and polymorphic repeat sequences used in DNA fingerprinting. As with analysis by PCR-based methods, some preferential amplification or allele drop-out at heterozygous loci was detected with single cells. With 2-5 cells, amplification was more consistent and with 10 or 20 cells results were indistinguishable from genomic DNA. The use of isothermal whole genome amplification as a universal first step marks a new era for PGD since, unlike previous PCR-based methods, sufficient DNA is amplified for diagnosis of any known single gene defect by standard methods and conditions.

The liquid-phase polymerase chain reaction (PCR) technique is the most commonly used method for the amplification of genetic materials, although it requires the lysis of cells for DNA or RNA extraction, making it impossible to visualize the distribution and subcellular localization of the biomolecules. This study intended to assess whether tissue sections may be directly and repeatedly used as templates for liquid-phase PCR amplifications. Consecutive paraffin sections of breast tissues were placed on gamma-methacryloxypropyltrimethoxysilane-coated microscopic cover glasses perforated with a diamond knife into strips. After hematoxylin and eosin or immuno-staining, the strip of interest was inserted into a PCR tube for amplifications, and the adjacent strip with the same tissue was subject to microdissection, DNA extraction, and PCR amplifications. To use the strip repeatedly, it was transferred into a new PCR tube and amplified with a new primer set, after an initial amplification for 5 to 7 cycles. Then, initially amplified samples were amplified to a total of 40 cycles. An equal volume of PCR products from the strip and DNA extract were loaded side by side for electrophoresis and detection. The strip and DNA extract from the same tissue yielded a very comparable quality and quantity of PCR products with the same primer sets. The strip, however, could be repeatedly used for PCR amplifications with substantially more primer sets. In addition, the strip could be used for immunohistochemical or other molecular assays after PCR amplifications. Further studies with the same protocol on strips containing chromosomal spreads generated similar results.

Polymerase chain reaction is the most widely used method for in vitro DNA amplification. However, it requires thermocycling to separate two DNA strands. In vivo, DNA is replicated by DNA polymerases with various accessory proteins, including a DNA helicase that acts to separate duplex DNA. We have devised a new in vitro isothermal DNA amplification method by mimicking this in vivo mechanism. Helicase-dependent amplification (HDA) utilizes a DNA helicase to generate single-stranded templates for primer hybridization and subsequent primer extension by a DNA polymerase. HDA does not require thermocycling. In addition, it offers several advantages over other isothermal DNA amplification methods by having a simple reaction scheme and being a true isothermal reaction that can be performed at one temperature for the entire process. These properties offer a great potential for the development of simple portable DNA diagnostic devices to be used in the field and at the point-of-care.

Isothermal multiple strand displacement amplification (IMDA) of the whole human genome is a promising method for procuring abundant DNA from valuable and often limited clinical specimens. However, whether DNA generated by this method is of high quality and a faithful replication of the DNA in the original specimen, allowing for subsequent molecular diagnostic testing, requires verification. In this study, we evaluated the suitability of IMDA-generated DNA (IMDA-DNA) for detecting antigen receptor gene rearrangements, chromosomal translocations, and gene mutations using Southern blot analysis, polymerase chain reaction (PCR) methods, or sequencing methods in 28 lymphoma and leukemia clinical specimens. Molecular testing before and after whole genome amplification of these specimens using the IMDA technique showed concordance in 27 of 28 (96%) specimens. Analysis of IMDA-DNA by Southern blot analysis detected restriction fragments >12 kilobases long. No amplification bias was observed at all loci tested demonstrating that this method can be useful in generating large amounts of unbiased, high molecular weight DNA from limited clinical specimens.

A.T. CSORDAS, J.D. BARAK AND M.J. DELWICHE. 2004. Aims: To evaluate the specificity and sensitivity of PCR primers for the detection of Salmonella enterica in a real-time PCR assay using pure cultures. Methods and Results: Unenriched whole cells in sterile water were used as template for each PCR. SYBR Green dye was used for the nonspecific detection of dsDNA. The real-time PCR detection limits of five previously published primer sets used in conventional PCR applications were not below 3 · 10 3 CFU per reaction (rxn). A new primer set, Sen, was designed, which detected Salm. enterica Newport down to 6 CFU rxn )1 in one case, and gave an average detection limit of 35 CFU rxn )1 over three separate runs. Conclusions: Primers originally designed for end-point PCR did not have adequate specificity or sensitivity compared with those specifically designed for real-time PCR. Significance and Impact of the Study: This study emphasizes the importance of evaluating real-time PCR primer sets in pure cultures prior to testing in field samples. This study will benefit other researchers in selecting an appropriate primer set for real-time PCR detection of Salm. enterica.

Aims: To evaluate the technique of multiple displacement amplification (MDA) for whole genome amplification from small volume blood samples before sequencing in a clinical test to identify haemoglobin gene mutations. Methods: Phage φ29 DNA polymerase was used to perform MDA, starting with either 1 μl of blood or 1 ng of previously isolated blood DNA from 23 patients. The amplified products were then evaluated using a clinical test that involves sequencing the haemoglobin genes to detect mutations. The results were compared with the current clinical test method that uses genomic DNA isolated using column based technology. Results: The MDA technique produced large quantities (theoretically approximately 2 mg) of DNA. The amplification procedure was extremely easy and took about four hours (less than one hour of hands on technician time and three hours for amplification). When MDA products were used in the same clinical test protocol as genomic DNA isolated using column technology, there was 100% concordance for detection of a variety of point mutations in the α1, α2, and β globin genes. Conclusions: The MDA technique is useful for overcoming the problem of insufficient genomic DNA in clinical specimens requiring haemoglobin gene sequencing and could be useful for other clinical applications.

DNA microarray-based screening and diagnostic technologies have long promised comprehensive testing capabilities. However, the potential of these powerful tools has been limited by front-end target-specific nucleic acid amplification. Despite the sensitivity and specificity associated with PCR amplification, the inherent bias and limited throughput of this approach constrain the principal benefits of downstream microarray-based applications, especially for pathogen detection. To begin addressing alternative approaches, we investigated four front-end amplification strategies: random primed, isothermal Klenow fragment-based, φ29 DNA polymerase-based, and multiplex PCR. The utility of each amplification strategy was assessed by hybridizing amplicons to microarrays consisting of 70-mer oligonucleotide probes specific for enterohemorrhagic Escherichia coli O157:H7 and by quantitating their sensitivities for the detection of O157:H7 in laboratory and environmental samples. Although nearly identical levels of hybridization specificity were achieved for each method, multiplex PCR was at least 3 orders of magnitude more sensitive than any individual random amplification approach. However, the use of Klenow-plus-Klenow and φ29 polymerase-plus-Klenow tandem random amplification strategies provided better sensitivities than multiplex PCR. In addition, amplification biases among the five genetic loci tested were 2- to 20-fold for the random approaches, in contrast to >4 orders of magnitude for multiplex PCR. The same random amplification strategies were also able to detect all five diagnostic targets in a spiked environmental water sample that contained a 63-fold excess of contaminating DNA. The results presented here underscore the feasibility of using random amplification approaches and begin to systematically address the versatility of these approaches for unbiased pathogen detection from environmental sources.

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalized to others. Here we report a protein engineering-based approach to significantly improve the processivity of DNA polymerases by covalently linking the polymerase domain to a sequence non-specific dsDNA binding protein. Using Sso7d from Sulfolobus solfataricus as the DNA binding protein, we demonstrate that the processivity of both family A and family B polymerases can be significantly enhanced. By introducing point mutations in Sso7d, we show that the dsDNA binding property of Sso7d is essential for the enhancement. We present evidence supporting two novel conclusions. First, the fusion of a heterologous dsDNA binding protein to a polymerase can increase processivity without compromising catalytic activity and enzyme stability. Second, polymerase processivity is limiting for the efficiency of PCR, such that the fusion enzymes exhibit profound advantages over unmodified enzymes in PCR applications. This technology has the potential to broadly improve the performance of nucleic acid modifying enzymes.

Polymerase chain reaction (PCR) is recognized as a rapid, sensitive, and specific molecular diagnostic tool for the analysis of nucleic acids. However, the sensitivity and kinetics of diagnostic PCR may be dramatically reduced when applied directly to biological samples, such as blood and feces, owing to PCR-inhibitory components. As a result, pre-PCR processing procedures have been developed to remove or reduce the effects of PCR inhibitors. Pre-PCR processing comprises all steps prior to the detection of PCR products, that is, sampling, sample preparation, and deoxyribonucleic acid (DNA) amplification. The aim of pre-PCR processing is to convert a complex biological sample with its target nucleic acids/cells into PCR-amplifiable samples by combining sample preparation and amplification conditions. Several different pre-PCR processing strategies are used: (1) optimization of the DNA amplification conditions by the use of alternative DNA polymerases and/or amplification facilitators, (2) optimization of the sample preparation method, (3) optimization of the sampling method, and (4) combinations of the different strategies. This review describes different pre-PCR processing strategies to circumvent PCR inhibition to allow accurate and precise DNA amplification.

Integration of DNA isolation, amplification, and sequencing can be achieved by the use of polymerase colonies (polonies) and cycles of fluorescent dNTP incorporation. In this paper, we present four advances that bring us closer to sequencing genomes cost-effectively using the polony technology. First, a polymerase trapping technique enables efficient nucleotide extension by DNA polymerase in a polyacrylamide matrix and eliminates loss of enzyme during sequencing cycles. Next, we present two novel types of reversibly dye-labeled nucleotide analogues, show that DNA polymerase can incorporate these analogues, and demonstrate that the dyes can be removed by thiol reduction or light exposure. Using these nucleotides, we have sequenced multiple polonies in parallel. In addition, we have found that a high density of polonies can be achieved with minimal overlap between adjacent polonies by limiting the concentration of free primer in the polony amplification reactions. Finally, we have developed software for automated image alignment and sequence calling.

PROBEmer (http://probemer.cs.loyola.edu) is a web-based software tool that enables a researcher to select optimal oligos for PCR applications and multiplex detection platforms including oligonucleotide microarrays and bead-based arrays. Given two groups of nucleic-acid sequences, a target group and a non-target group, the software identifies oligo sequences that occur in members of the target group, but not in the non-target group. To help predict potential cross hybridization, PROBEmer computes all near neighbors in the non-target group and displays their alignments. The software has been used to obtain genus-specific prokaryotic probes based on the 16S rRNA gene, gene-specific probes for expression analyses and PCR primers. In this paper, we describe how to use PROBEmer, the computational methods it employs, and experimental results for oligos identified by this software tool.

The polymerase chain reaction and its expanding numbers of modifications have become a mainstay in diagnostic and research medicine. The technique allows amplification of nucleic acid sequences both for the purposes of disease and pathogen detection and also for the preparation of hybridization probes and sequencing templates. PCR mimics the in vivo process of DNA replication with a sensitivity which enables detection of a single target sequence in 106 genomes. The principles of standard PCR, together with its more widely-used variations, are reviewed and their main applications outlined.

Molecular approaches to species-specific identification are frequently applied in diagnostic, epidemiological, and phylogenetic studies. Many of these methodologies, such as polymerase chain reaction (PCR), random amplified polymorphic DNA, and restriction-fragment length polymorphism assays, make use of universal-primer sequences during the development of the assays or even in routine applications. This practise, particularly with environmental samples, can lead to erroneous conclusions, because samples may be contaminated with a wide range of diverse DNA sequences. As an example, in the course of developing PCR-based diagnostics for common nematode plant pathogens, in this study, the 18S–25S intragenic regions from genes encoding rRNA in the target organisms were isolated by PCR amplification. Employing “universal” primers, products of various sizes were amplified from DNA in six different pathogenic species, which had been isolated from the field and identified morphologically. While the observed size ...

We have devised a class of isothermal reactions for amplifying DNA. These homogeneous reactions rapidly synthesize short oligonucleotides (8–16 bases) specified by the sequence of an amplification template. Versions of the reactions can proceed in either a linear or an exponential amplification mode. Both of these reactions require simple, constant conditions, and the rate of amplification depends entirely on the molecular parameters governing the interactions of the molecules in the reaction. The exponential version of the reaction is a molecular chain reaction that uses the oligonucleotide products of each linear reaction to create producers of more of the same oligonucleotide. It is a highly sensitive chain reaction that can be specifically triggered by given DNA sequences and can achieve amplifications of >10 6 -fold. Several similar reactions in this class are described here. The robustness, speed, and sensitivity of the exponential reaction suggest it will be useful in rapidly detecting the presence of small amounts of a specific DNA sequence in a sample, and a range of other applications, including many currently making use of the PCR.

In-house polymerase chain reaction (PCR) assays are now an integral part of the work of most diagnostic microbiological laboratories. Despite the availability of commercial reagent ‘master-mixes’ of some PCR reagents, the optimisation of primers still poses a significant problem. Here, we describe a simple method to assess the concentration of primer needed in single round, multiplex, nested and ‘real-time’ PCR procedures.

With the ability to exponentially amplify regions of DNA, two different PCR-based strategies have been developed for nonculture diagnosis of bacteremia. The first approach targets the species-specific genes for amplification (1), whereas the second approach involves universal PCR amplification of conserved bacterial DNA sequences, such as the 16S rRNA, the 23S rRNA, and the 16S-23S rRNA interspace regions (2)(3)(4). Although universal PCR is not able to distinguish bacteria to the species level, numerous studies have shown that this method provides valuable information complementary to the results of time-consuming and subjective phenotypic tests used in detection of bacterial infection (5) and can be used to differentiate bacterial from viral or other infections (6)(7). In clinical applications, real-time PCR for broad-range amplification of bacterial DNA sequences could offer additional benefits: it is less labor-intensive, less time-consuming, and reduces the risk of PCR carryover contamination. A major obstacle for broad-range PCR amplification is the presence of bacterial DNA in the Taq DNA polymerase and real-time PCR master mixture (8)(9)(10). The contaminating DNA is effectively amplified, giving rise to false-positive results. Efforts have been taken to eliminate contaminating DNA, including the use of Sau 3AI restriction endonuclease (11), DNase I (12)(13), and ultraviolet irradiation (7)(8). Although these strategies may be effective for conventional PCR, the study by Corless et al. (14) indicated that the contamination issue could not be avoided without affecting sensitivity when TaqMan probe-based real-time PCR is performed. Therefore, an appropriate method for removal of contaminating bacterial DNA and subsequent real-time amplification is required. In this study, we address this issue and report optimized conditions for broad-range amplification of the bacterial 16S rRNA gene by real-time PCR using SYBR Green I dye (15) as the fluorescent signal. Bacterial …

Polymerase chain reaction (PCR) is a highly sensitive and specific method for detection and quantification of specific nucleic acids from a clinical sample. With its use, genetic, infectious, neoplastic, and autoimmune diseases can be diagnosed and managed with a high level of sensitivity, accuracy, and rapidity. This technique exactly reproduces unlimited copies of DNA, even if only a small amount are present initially. PCR assays can detect presence of fastidious and slow-growing microorganisms, such as chlamydia, mycoplasmas, mycobacterias, and viruses directly from clinical specimens and also can detect antimicrobial resistance. The value of viral load measurement by nucleic acid amplification in the management of patients with HIV infection or hepatitis C has also been well established. From the point of view of a clinician, the applications of PCR are focused mainly in the amplification and detection of diagnostic DNA segments from the genomes of both pathogens and patients.

Amplification of source DNA is a nearly universal requirement for molecular biology applications. The primary methods currently available to researchers are limited to in vivo amplification in Escherichia coli hosts and the polymerase chain reaction. Rolling-circle DNA replication is a well-known method for synthesis of phage genomes and recently has been applied as rolling circle amplification (RCA) of specific target sequences as well as circular vectors used in cloning. Here, we demonstrate that RCA using random hexamer primers with Φ29 DNA polymerase can be used for strand-displacement amplification of different vector constructs containing a variety of insert sizes to produce consistently uniform template for end-sequencing reactions. We show this procedure to be especially effective in a high-throughput plasmid production sequencing process. In addition, we demonstrate that whole bacterial genomes can be effectively amplified from cells or small amounts of purified genomic DNA without apparent bias for use in downstream applications, including whole genome shotgun sequencing.

Real-time polymerase chain reaction (PCR) techniques are increasingly used to quantify target sequences for diagnostic and research purposes. Due to its ‘quantitative’ character, it is very important to determine the variability of this technique correlating with several experimental conditions. The objective of this study was to analyse the effect of manufacturing lots of PCR reagents on two main PCR parameters, specificity and sensitivity. For this study, we used four different amplicons, using either mouse genomic DNA or viral DNA. Although a PCR product could be obtained in any of the conditions, we observed that there are relevant variations in sensitivity depending on the reagents formulation. We conclude that different lots of reagents may determine the analytical performance of PCR assays indicating that reagents testing are of special importance when the PCR protocol is used for quantitative purposes. # 2002 Elsevier Science Ltd. All rights reserved.

We have developed a novel, isothermal DNA amplification strategy that employs ⌽29 DNA polymerase and rolling circle amplification to generate high-quality templates for DNA sequencing reactions. The TempliPhi™ DNA amplification kits take advantage of the fact that cloned DNA is typically obtained in circular vectors, which are readily replicated in vitro using ⌽29 DNA polymerase by a rolling circle mechanism. This single subunit, proofreading DNA polymerase has excellent processivity and strand displacement properties for generation of multiple, tandem double-stranded copies of the circular DNA, generating as much as 107-fold amplification. Large amounts of product (1−3 μg) can be obtained in as little as 4 hours. Input DNA can be as little as 0.01 ng of purified plasmid DNA, a single bacterial colony, or a 1 μL of a saturated overnight culture. Additionally, the presence of an associated proofreading function within the ⌽29 DNA polymerase ensures high-fidelity amplification. Once completed, the product DNA can be used directly in sequencing reactions. Additionally, the properties of ⌽29 DNA polymerase and its use in applications such as amplification of human genomic DNA for genotyping studies is discussed.

Fundamental to most genetic analysis is availability of genomic DNA of adequate quality and quantity. Because DNA yield from human samples is frequently limiting, much effort has been invested in developing methods for whole genome amplification (WGA) by random or degenerate oligonucleotide-primed PCR. However, existing WGA methods like degenerate oligonucleotide-primed PCR suffer from incomplete coverage and inadequate average DNA size. We describe a method, termed multiple displacement amplification (MDA), which provides a highly uniform representation across the genome. Amplification bias among eight chromosomal loci was less than 3-fold in contrast to 4–6 orders of magnitude for PCR-based WGA methods. Average product length was >10 kb. MDA is an isothermal, strand-displacing amplification yielding about 20–30 μg product from as few as 1–10 copies of human genomic DNA. Amplification can be carried out directly from biological samples including crude whole blood and tissue culture cells. MDA-amplified human DNA is useful for several common methods of genetic analysis, including genotyping of single nucleotide polymorphisms, chromosome painting, Southern blotting and restriction fragment length polymorphism analysis, subcloning, and DNA sequencing. MDA-based WGA is a simple and reliable method that could have significant implications for genetic studies, forensics, diagnostics, and long-term sample storage.

Several whole genome amplification strategies have been developed to preamplify the entire genome from minimal amounts of DNA for subsequent molecular genetic analysis. However, none of these techniques has proven to amplify long products from very low (nanogram or picogram) quantities of genomic DNA. Here we report a new whole genome amplification protocol using a degenerate primer (DOP-PCR) that generates products up to about 10 kb in length from less than 1 ng genomic template DNA. This new protocol (LL-DOP-PCR) allows in the subsequent PCR the specific amplification, with high fidelity, of DNA fragments that are more than 1 kb in length. LL-DOP-PCR provides significantly better coverage for microsatellites and unique sequences in comparison to a conventional DOP-PCR method.

We have developed a simple method, designated as Gene Specific-Primer Extension Preamplification (GS-PEP), to increase the copy number of genomic DNA fragments for a gene of interest prior to PCR amplification. In this method, multiple cycles of primer-extension reaction are undertaken in a single tube using a mixture of primers derived from a defined strand of DNA sequences covering a gene. After 50 cycles of GS-PEP against 21pg of genomic DNA, which corresponds to approximately 3 copies of diploid human genome DNA, with a mixture of 6 primers for the p53 gene locus, all the 10 coding exons of the p53 gene were readily amplifiable by standard PCR at rates of 100%. In contrast, direct PCR against 21pg of genomic DNA was estimated to allow the amplification of only 3 exons. This procedure also enhanced the rate of amplification by PCR using genomic DNA extracted from formalin-fixed and paraffin-embedded tissues. Thus, GS-PEP would allow mutation analyses of various genes in cancer cells using small amounts and/or low qualities of DNA.

Next-generation sequencing technology has enabled the detection of rare genetic or somatic mutations and contributed to our understanding of disease progression and evolution. However, many next-generation sequencing technologies first rely on DNA amplification, via the Polymerase Chain Reaction (PCR), as part of sample preparation workflows. Mistakes made during PCR appear in sequencing data and contribute to false mutations that can ultimately confound genetic analysis. In this report, a single-molecule sequencing assay was used to comprehensively catalog the different types of errors introduced during PCR, including polymerase misincorporation, structure-induced template-switching, PCR-mediated recombination and DNA damage. In addition to well-characterized polymerase base substitution errors, other sources of error were found to be equally prevalent. PCR-mediated recombination by Taq polymerase was observed at the single-molecule level, and surprisingly found to occur as frequently as polymerase base substitution errors, suggesting it may be an underappreciated source of error for multiplex amplification reactions. Inverted repeat structural elements in lacZ caused polymerase template-switching between the top and bottom strands during replication and the frequency of these events were measured for different polymerases. For very accurate polymerases, DNA damage introduced during temperature cycling, and not polymerase base substitution errors, appeared to be the major contributor toward mutations occurring in amplification products. In total, we analyzed PCR products at the single-molecule level and present here a more complete picture of the types of mistakes that occur during DNA amplification.

Next-generation sequencing technology has enabled the detection of rare genetic or somatic mutations and contributed to our understanding of disease progression and evolution. However, many next-generation sequencing technologies first rely on DNA amplification, via the Polymerase Chain Reaction (PCR), as part of sample preparation workflows. Mistakes made during PCR appear in sequencing data and contribute to false mutations that can ultimately confound genetic analysis. In this report, a single-molecule sequencing assay was used to comprehensively catalog the different types of errors introduced during PCR, including polymerase misincorporation, structure-induced template-switching, PCR-mediated recombination and DNA damage. In addition to well-characterized polymerase base substitution errors, other sources of error were found to be equally prevalent. PCR-mediated recombination by Taq polymerase was observed at the single-molecule level, and surprisingly found to occur as frequently as polymerase base substitution errors, suggesting it may be an underappreciated source of error for multiplex amplification reactions. Inverted repeat structural elements in lacZ caused polymerase template-switching between the top and bottom strands during replication and the frequency of these events were measured for different polymerases. For very accurate polymerases, DNA damage introduced during temperature cycling, and not polymerase base substitution errors, appeared to be the major contributor toward mutations occurring in amplification products. In total, we analyzed PCR products at the single-molecule level and present here a more complete picture of the types of mistakes that occur during DNA amplification.