Search

Emitted smoke composition is determined by properties of the biomass burning source and ambient ecosystem. However, conditions that mediate the partitioning of black carbon (BC) and brown carbon (BrC) formation, as well as the spatial and temporal factors that drive particle evolution, are not understood adequately for many climate and air-quality related modeling applications. In situ observations provide considerable detail about aerosol microphysical and chemical properties, although sampling is extremely limited. Satellites offer the frequent global coverage that would allow for statistical characterization of emitted and evolved smoke, but generally lack microphysical detail. However, once properly validated, data from the National Aeronautics and Space Administration (NASA) Earth Observing System’s Multi-Angle Imaging Spectroradiometer (MISR) instrument can create at least a partial picture of smoke particle properties and plume evolution. We use in situ data from the Department of Energy’s Biomass Burning Observation Project (BBOP) field campaign to assess the strengths and limitations of smoke particle retrieval results from the MISR Research Aerosol (RA) retrieval algorithm. We then use MISR to characterize wildfire smoke particle properties and to identify the relevant aging factors in several cases, to the extent possible. The RA successfully maps qualitative changes in effective particle size, light absorption, and its spectral dependence, when compared to in situ observations. By observing the entire plume uniformly, the satellite data can be interpreted in terms of smoke plume evolution, including size-selective deposition, new-particle formation, and locations within the plume where BC or BrC dominates.

In this study, aquatic plants in a small reservoir were detected using multispectral UAV (Unmanned Aerial Vehicle) imagery and various vegetation indices. A Firefly UAV, which has both fixed-wing and rotary-wing flight modes, was flown over the study site four times. A RedEdge camera was mounted on the UAV to acquire multispectral images. These images were used to analyze the NDVI (Normalized Difference Vegetation Index), ENDVI (Enhance Normalized Difference Vegetation Index), NDREI (Normalized Difference RedEdge Index), NGRDI (Normalized Green-Red Difference Index), and GNDVI (Green Normalized Difference Vegetation Index). As for multispectral characteristics, waterside plants showed the highest reflectance in Rnir, while floating plants had a higher reflectance in Rre. During the hottest season (on 25 June), the vegetation indices were the highest, and the habitat expanded near the edge of the reservoir. Among the vegetation indices, NDVI was the highest and NGRDI was the lowest. In particular, NGRDI had a higher value on the water surface and was not useful for detecting aquatic plants. NDVI and GNDVI, which showed the clearest difference between aquatic plants and water surface, were determined to be the most effective vegetation indices for detecting aquatic plants. Accordingly, the vegetation indices using multispectral UAV imagery turned out to be effective for detecting aquatic plants. A further study will be accompanied by a field survey in order to acquire and analyze more accurate imagery information.

Many crop production management decisions can be informed using data from high-resolution aerial images that provide information about crop health as influenced by soil fertility and moisture. Surface soil moisture is a key component of soil water balance, which addresses water and energy exchanges at the surface/atmosphere interface; however, high-resolution remotely sensed data is rarely used to acquire soil moisture values. In this study, an artificial neural network (ANN) model was developed to quantify the effectiveness of using spectral images to estimate surface soil moisture. The model produces acceptable estimations of surface soil moisture (root mean square error (RMSE) = 2.0, mean absolute error (MAE) = 1.8, coefficient of correlation (r) = 0.88, coefficient of performance (e) = 0.75 and coefficient of determination (R2) = 0.77) by combining field measurements with inexpensive and readily available remotely sensed inputs. The spatial data (visual spectrum, near infrared, infrared/thermal) are produced by the AggieAir™ platform, which includes an unmanned aerial vehicle (UAV) that enables users to gather aerial imagery at a low price and high spatial and temporal resolutions. This study reports the development of an ANN model that translates AggieAir™ imagery into estimates of surface soil moisture for a large field irrigated by a center pivot sprinkler system.

Highlights • Land surface reflected solar radiation is disturbance in aerosol remote sensing. • Solve the problem of land–atmosphere decoupling from polarized measurements more accurately. • Retrieved the global AOD from PARASOL measurements and distinguished the error sources. • AOD value has the greatest effect on the precision of the retrieval results. • The Angstrom exponent and NDVI values had only minor effects on the accuracy. Abstract Land–atmospheric decoupling is important for the retrieval accuracy in atmospheric remote sensing. In this study, we developed an algorithm that adaptively decouples the land surface and atmosphere reflected solar radiation and retrieves the aerosol properties (adaptive land–atmospheric decoupling algorithm, ALAD). The ALAD algorithm allows precise global aerosol optical depth (AOD) retrievals. The four sub-procedures in ALAD comprise estimating a first guess for surface properties, aerosol property retrieval, atmospheric correction, and assessing the results. The ALAD algorithm was applied to PARASOL (Polarization & Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar) and the retrieved AODs were compared with the AOD products from the Moderate resolution Imaging Spectroradiometer (MODIS) and AErosol RObotic NETwork (AERONET). ALAD and MODIS retrieved AOD values were with good consistency in terms of their spatial distribution, regardless of the region or the global distribution. The correlation coefficient between the global ALAD and AERONET AOD was 0.875, and about 60.7% of the AODs retrieved by ALAD were within the expected error range of ±(15% AOD + 0.05). The results obtained using ALAD agreed well with the AERONET values. We also investigated the aerosol and land surface properties that might introduce errors into the AOD values retrieved by ALAD. It was found that the value of AOD had the greatest effect on the accuracy of the retrieval results. The errors introduced by the Angstrom exponent and Normalized Difference Vegetation Index varied slightly but they made no significant contributions. [ABSTRACT FROM AUTHOR]

Remote sensing data are most useful if they are available with sufficient precision, accuracy, spatiotemporal and spectral sampling, as well as continuity across decades. The Landsat and Sentinel series, as well other satellites are currently covering significant parts of this observational trade space. It can be expected that growing demands and budget constraints will require new capabilities in orbit that can address as many observables as possible with a single instrument. Recent optical performance improvements of imaging spectrometers make them true alternatives to traditional multispectral imagers. However, they are much more adaptable to a wide range of Earth observation needs due to the combination of continuous high spectral sampling with spatial sampling consistent with previous sensors (e.g., Landsat). Unfortunately, there is a knowledge gap in demonstrating that imaging spectroscopy data can substitute for multi-spectral data while sustaining the long-term record. Thus, the objective of this analysis is to test the hypothesis that imaging spectroscopy data compare radiometrically with multi-spectral data to within 5%. Using a coincident Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) flight with over-passing Operational Land Imager (OLI) data on Landsat 8, we document a procedure for simulating OLI multi-spectral bands from AVIRIS data, evaluate influencing factors on the observed radiance, and assess the difference in top-of-atmosphere radiance as compared to OLI. The procedure for simulating OLI data include spectral convolution, accounting for the minimal atmospheric effects between the two sensors, and spatial resampling. The remaining differences between the simulated and the real OLI data result mainly from differences in sensor calibration, surface bi-directional reflectance, and spatial sampling. The median relative radiometric difference for each band ranges from −8.3% to 0.6%. After bias-correction to minimize potential calibration discrepancies, we find no more than a 1.2% relative difference. This analysis therefore successfully demonstrates that imaging spectrometer data can contribute to Landsat-type or other multi-spectral data records. It also shows that cross-calibration from a spectrometer to a radiometer can be easily performed as a result of the imaging spectrometer high spectral sampling and its ability to recreate multi-spectral response functions. [ABSTRACT FROM AUTHOR]

Timely and accurately predicting grain yield before harvest is of great importance for rice production management and grain trade. Numerous methods based on remote sensing (RS) technology have explored to estimate rice grain yield. However, in most cases, these methods are negatively affected by the mixed pixels of RS images due to the effect of background and panicles. To resolve such issues, the abundance information of leaves, soil and water background and rice panicles were extracted from the multispectral images of unmanned aerial vehicle (UAV) for the multiple endmember spectral mixture analysis (MESMA) method. Based on the analysis of contribution of vegetation index (VI) and abundance (ABD) to rice grain yield, a rice grain yield prediction model was developed by combining multi-stage time-series, ABD and VI. Results showed that MESMA can mitigate endmember variability in the estimation of rice yield, and achieve higher accuracy than conventional spectral mixture analysis (SMA). The NDRE and the sum of leaf and panicle abundance (ABD L+P) can be well correlated to grain yield before heading stage (R2 = 0.75) and at heading stage (R2 = 0.72), respectively. In comparison to them, the multi-stage time-series model consisted of VI and ABD [∑(VI&ABD)] produces the highest correlation (R2 = 0.80). It could also resolve the issues about the underestimation of yield using different datasets from various multi-spectral camera in comparison to the single-parameter models ∑VI and ∑ABD, and produce the good validation accuracy with R2 = 0.73, RRMSE= 0.22 and R2 = 0.75, RRMSE= 0.15, respectively. This study suggests that the combination of UAV multi-temporal VI and ABD data can achieve accurate prediction of rice grain yield. This method effectively utilizes the optical information of leaves and rice panicles and reduces background effects, which provides a new idea for accurate rice yield prediction. • A multi-stage time-series GY prediction model combining VI and EM abundance. • MESMA method solves the problem of spectral variability in rice fields. • GY response is contributed by both leaves and panicles. • The model used NDRE at booting and ABD from heading to initial filling can give the best results. [ABSTRACT FROM AUTHOR]

Via providing various ecosystem services, the old-growth Hyrcanian forests play a crucial role in the environment and anthropogenic aspects of Iran and beyond. The amount of growing stock volume (GSV) is a forest biophysical parameter with great importance in issues like economy, environmental protection, and adaptation to climate change. Thus, accurate and unbiased estimation of GSV is also crucial to be pursued across the Hyrcanian. Our goal was to investigate the potential of ALOS-2 and Sentinel-1’s polarimetric features in combination with Sentinel-2 multi-spectral features for the GSV estimation in a portion of heterogeneously-structured and mountainous Hyrcanian forests. We used five different kernels by the support vector regression (nu-SVR) for the GSV estimation. Because each kernel differently models the parameters, we separately selected features for each kernel by a binary genetic algorithm (GA). We simultaneously optimized R2 and RMSE in a suggested GA fitness function. We calculated R2, RMSE to evaluate the models. We additionally calculated the standard deviation of validation metrics to estimate the model’s stability. Also for models over-fitting or under-fitting analysis, we used mean difference (MD) index. The results suggested the use of polynomial kernel as the final model. Despite multiple methodical challenges raised from the composition and structure of the study site, we conclude that the combined use of polarimetric features (both dual and full) with spectral bands and indices can improve the GSV estimation over mixed broadleaf forests. This was partially supported by the use of proposed evaluation criterion within the GA, which helped to avoid the curse of dimensionality for the applied SVR and lowest over estimation or under estimation.

The spatial distribution and location of crops are necessary information for agricultural planning. The free availability of optical satellites such as Landsat offers an opportunity to obtain this key information. Crop type mapping using satellite data is challenged by its reliance on ground truth data. The Integrated Administration and Control System (IACS) data, submitted by farmers in Europe for subsidy payments, provide a solution to the issue of periodic field data collection. The present study tested the performance of the IACS data in the development of a generalized predictive crop type model, which is independent of the calibration year. Using the IACS polygons as objects, the mean spectral information based on four different vegetation indices and six Landsat bands were extracted for each crop type and used as predictors in a random forest model. Two modelling methods called single-year (SY) and multiple-year (MY) calibration were tested to find out their performance in the prediction of grassland, maize, summer, and winter crops. The independent validation of SY and MY resulted in a mean overall accuracy of 71.5% and 77.3%, respectively. The field-based approach of calibration used in this study dealt with the ‘salt and pepper’ effects of the pixel-based approach.

In recent years, sequential tests for detecting structural changes in time series have been adapted for deforestation monitoring using satellite data. The input time series of such sequential tests is typically a vegetation index (e.g., NDVI), which uses two or three bands and ignores all other bands. Being limited to a vegetation index will not benefit from the richer spectral information provided by newly launched satellites and will bring two bottle-necks for deforestation monitoring. Firstly, it is hard to select a suitable vegetation index a priori. Secondly, a single vegetation index is typically affected by seasonal signals, noise and other natural dynamics, which decrease its power for deforestation detection. A novel multispectral time series change monitoring method that combines dimension reduction methods with a sequential hypothesis test is proposed to address these limitations. For each location, the proposed method automatically chooses a “suitable” index for deforestation monitoring. To demonstrate our approach, we implemented it in two study areas: a dry tropical forest in Bolivia (time series length: 444) with strong seasonality and a moist tropical forest in Brazil (time series length: 225) with almost no seasonality. Our method significantly improves accuracy in the presence of strong seasonality, in particular the temporal lag between disturbance and its detection. [ABSTRACT FROM AUTHOR]

Hyperspectral imaging system can obtain spectral and spatial information simultaneously with bandwidth to the level of 10 nm or even less. Therefore, hyperspectral remote sensing has the ability to detect some kinds of objects which can not be detected in wide-band remote sensing, making it becoming one of the hottest spots in remote sensing. In this study, under conditions with a fuzzy set of full constraints, Normalized Multi-Endmember Decomposition Method (NMEDM) for vegetation, water, and soil was proposed to reconstruct hyperspectral data using a large number of high-quality multispectral data and auxiliary spectral library data. This study considered spatial and temporal variation and decreased the calculation time required to reconstruct the hyper-spectral data. The results of spectral reconstruction based on NMEDM showed that the reconstructed data has good qualities and certain applications, which makes it possible to carry out spectral features identification. This method also extends the application of depth and breadth of remote sensing data, helping to explore the law between multispectral and hyperspectral data. [ABSTRACT FROM AUTHOR]

Establishing dense correspondences between multiple images is a fundamental task in many applications. However, finding a reliable correspondence between multi-modal or multi-spectral images still remains unsolved due to their challenging photometric and geometric variations. In this paper, we propose a novel dense descriptor, called dense adaptive self-correlation (DASC), to estimate dense multi-modal and multi-spectral correspondences. Based on an observation that self-similarity existing within images is robust to imaging modality variations, we define the descriptor with a series of an adaptive self-correlation similarity measure between patches sampled by a randomized receptive field pooling, in which a sampling pattern is obtained using a discriminative learning. The computational redundancy of dense descriptors is dramatically reduced by applying fast edge-aware filtering. Furthermore, in order to address geometric variations including scale and rotation, we propose a geometry-invariant DASC (GI-DASC) descriptor that effectively leverages the DASC through a superpixel-based representation. For a quantitative evaluation of the GI-DASC, we build a novel multi-modal benchmark as varying photometric and geometric conditions. Experimental results demonstrate the outstanding performance of the DASC and GI-DASC in many cases of dense multi-modal and multi-spectral correspondences. [ABSTRACT FROM AUTHOR]

Research into remote sensing tools for monitoring physiological stress caused by biotic and abiotic factors is critical for maintaining healthy and highly-productive plantation forests. Significant research has focussed on assessing forest health using remotely sensed data from satellites and manned aircraft. Unmanned aerial vehicles (UAVs) may provide new tools for improved forest health monitoring by providing data with very high temporal and spatial resolutions. These platforms also pose unique challenges and methods for health assessments must be validated before use. In this research, we simulated a disease outbreak in mature Pinus radiata D. Don trees using targeted application of herbicide. The objective was to acquire a time-series simulated disease expression dataset to develop methods for monitoring physiological stress from a UAV platform. Time-series multi-spectral imagery was acquired using a UAV flown over a trial at regular intervals. Traditional field-based health assessments of crown health (density) and needle health (discolouration) were carried out simultaneously by experienced forest health experts. Our results showed that multi-spectral imagery collected from a UAV is useful for identifying physiological stress in mature plantation trees even during the early stages of tree stress. We found that physiological stress could be detected earliest in data from the red edge and near infra-red bands. In contrast to previous findings, red edge data did not offer earlier detection of physiological stress than the near infra-red data. A non-parametric approach was used to model physiological stress based on spectral indices and was found to provide good classification accuracy (weighted kappa = 0.694). This model can be used to map physiological stress based on high-resolution multi-spectral data. [ABSTRACT FROM AUTHOR]

The potential of multi-spectral visible-near infrared imaging to discriminate beef meat muscles in relation with their type and animal origin was examined in the present study. Two hundred forty muscles of three types (longissimus thoracis, biceps femoris, andsemimembranosus) were obtained from the carcasses of three types of animals, two late-maturing cattle types of animals (Limousin and Blond d’Aquitaine) that grow slowly and deposit more muscles and less fat, compared to one early-maturing cattle types of animals (Angus) which tends to have muscles richer in collagen and in intramuscular fat. Two hundred forty cube images were collected with nineteen Ligth Emitting Diodes (405 to 1050 nm) using the Videometer Lab2 device. The image cubes were processed in order to extract image mean spectra and image shape features from co-occurrence and difference of histogram matrices. The results of the partial least square discriminant analysis performed on image texture features and spectral data show a maximum ranging from 63.5 to 83% of good classification depending on the muscle and breed considered. This study demonstrated the promising potential of the visible-near infrared multi-spectral imager to characterize beef meat muscles based on muscle type and its animal origin. [ABSTRACT FROM PUBLISHER]

Viewing and illumination geometry has a strong influence on optical measurements of natural surfaces due to their anisotropic reflectance properties. Typically, cameras on-board unmanned aerial vehicles (UAVs) are affected by this because of their relatively large field of view (FOV) and thus large range of viewing angles. In this study, we investigated the magnitude of reflectance anisotropy effects in the 500–900 nm range, captured by a frame camera mounted on a UAV during a standard mapping flight. After orthorectification and georeferencing of the images collected by the camera, we calculated the viewing geometry of all observations of each georeferenced ground pixel, forming a dataset with multi-angular observations. We performed UAV flights on two days during the summer of 2016 over an experimental potato field where different zones in the field received different nitrogen fertilization treatments. These fertilization levels caused variation in potato plant growth and thereby differences in structural properties such as leaf area index (LAI) and canopy cover. We fitted the Rahman–Pinty–Verstraete (RPV) model through the multi-angular observations of each ground pixel to quantify, interpret, and visualize the anisotropy patterns in our study area. The Q parameter of the RPV model, which controls the proportion of forward and backward scattering, showed strong correlation with canopy cover, where in general an increase in canopy cover resulted in a reduction of backward scattering intensity, indicating that reflectance anisotropy contains information on canopy structure. In this paper, we demonstrated that anisotropy data can be extracted from measurements using a frame camera, collected during a typical UAV mapping flight. Future research will focus on how to use the anisotropy signal as a source of information for estimation of physical vegetation properties. [ABSTRACT FROM AUTHOR]

This paper describes selected results from over a dozen collaborative projects led by Commonwealth Scientific and Industrial Research Organisation (CSIRO) in Australia spanning a 30-year history of developments in satellite, airborne, field and drill core sensing technologies and how these can assist explorers to measure and map valuable mineral information. The exploration case histories are largely from Australian test sites and describe how spectral sensing technologies have progressed from early "niche creation" systems, such as the field PIMA-II (Portable Field Mineral Analyzer) and airborne Geoscan, HyMap™ and OARS-TIPS (Operational Airborne Remote Sensing - Thermal Infrared Profiling Spectrometer) systems and drill-core HyLogger™ systems, to the current expanding array of pubic and commercial mineral mapping sensors, including the ASTER (Advanced Spaceborne Thermal Emission and Reflectance Radiometer) satellite system which has acquired imagery spanning the entire Earth's land surface (<83°latitude). These sensors are delivering voluminous spectral data from different parts of the visible to the thermal infrared (400 to 14,000 nm) spectrum at different spectral, radiometric and spatial resolutions. Two critical exploration challenges are central to the case histories, namely: (i) can surface cover, such as vegetation, regolith or transported materials, be characterized and accounted for so that the target geology is accurately revealed; and (ii) does this revealed geology show evidence of alteration footprints to potential economic mineralization. Spectrally measurable minerals important to solving these challenges include white micas, kaolinite and garnets, with measurement of their respective physicochemistries being key. For example, kaolin disorder is useful for mapping transported versus weathered in situ materials, while the chemical substitution in white micas and garnets provide vectors to potential economic mineralization. Importantly, appropriate selection of the optimum sensor/data type for a given geological application depends primarily on the level of detail/accuracy of the mineral information required by the user. A major opportunity is to now harness the many sensor/data types and deliver to users consistent, accurate mineral information products, that is, creation of a number of valuable global mineral product standards. As part of this vision, CSIRO has been developing improved sensor/data calibration processes and information extraction methods that for example, unmix the target mineralogy from green and dry vegetation cover in remote sensing data sets. Emphasis to date has been on generating public spectral-mineral product standards, especially at ASTER's limited but geologically-valuable spectral resolution. The results are showing that scalable, global, three-dimensional (3D) mineral maps are achievable which will only improve our ability to more accurately characterize regolith and geological architecture, increase our understanding of formative processes and assist the discovery of new economic mineral systems. [ABSTRACT FROM AUTHOR]

Detection of change is the measure of the distinct data framework and thematic change information that can direct to more tangible insights into underlying process involving land cover and landuse changes. Monitoring the locations and distributions of land cover changes is important for establishing links between policy decisions, regulatory actions and subsequent landuse activities. Change detection is the process that helps in determining the changes associated with landuse and land cover properties with reference to geo-registered multi-temporal remote sensing information. It assists in identifying change between two or more dates that is uncharacterized of normal variation. After image to image registrations, the normalized difference vegetation index (NDVI), the transformed normalized difference vegetation index (TNDVI), the enhanced vegetation index (EVI) and the soil-adjusted vegetation index (SAVI) values were derived from Landsat ETM+ dataset and an image differencing algorithm was applied to detect changes. This paper presents an application of the use of multi-temporal Landsat ETM+ images and multi-spectral MODIS (Terra) EVI/NDVI time-series vegetation phenology metrics for the District Sargodha. The results can be utilized as a temporal landuse change model for Punjab province of Pakistan to quantify the extent and nature of change and assist in future prediction studies. This will support environmental planning to develop sustainable landuse practices.

In this study we use visible, short-wave infrared and thermal Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data validated with high-resolution Quickbird (QB) and Worldview2 (WV2) for mapping debris cover in the eastern Himalaya using two independent approaches: (a) a decision tree algorithm, and (b) texture analysis. The decision tree algorithm was based on multi-spectral and topographic variables, such as band ratios, surface reflectance, kinetic temperature from ASTER bands 10 and 12, slope angle, and elevation. The decision tree algorithm resulted in 64 km2 classified as debris-covered ice, which represents 11% of the glacierized area. Overall, for ten glacier tongues in the Kangchenjunga area, there was an area difference of 16.2 km2 (25%) between the ASTER and the QB areas, with mapping errors mainly due to clouds and shadows. Texture analysis techniques included co-occurrence measures, geostatistics and filtering in spatial/frequency domain. Debris cover had the highest variance of all terrain classes, highest entropy and lowest homogeneity compared to the other classes, for example a mean variance of 15.27 compared to 0 for clouds and 0.06 for clean ice. Results of the texture image for debris-covered areas were comparable with those from the decision tree algorithm, with 8% area difference between the two techniques.

Individual tree species identification is important for urban forest inventory and ecology management. Recent advances in remote sensing technologies facilitate more detailed estimation of individual urban tree characteristics. This study presents an approach to improve the classification of individual tree species via longitudinal profiles from very high spatial resolution airborne imagery. The longitudinal profiles represent the side view tree shape, which play a very important role in individual tree species on-site identification. Decision tree classification was employed to conduct the final classification result. Using this profile approach, six major species (Maple, Ash, Birch, Oak, Spruce, Pine) of trees on the York University (Ontario, Canada) campus were successfully identified. Two decision trees were constructed, one knowledge-based and one derived from gain ratio criteria. The classification accuracy achieved were 84% and 86%, respectively.

Mapping the distribution of forested areas and monitoring their spatio-temporal changes are necessary for the conservation and management of forests. This paper presents two new image composites for the visualization and extraction of forest cover. By exploiting the Landsat-8 satellite-based multi-temporal and multi-spectral reflectance datasets, the Forest Cover Composite (FCC) was designed in this research. The FCC is an RGB (red, green, blue) color composite made up of short-wave infrared reflectance and green reflectance, specially selected from the day when the Normalized Difference Vegetation Index (NDVI) is at a maximum, as the red and blue bands, respectively. The annual mean NDVI values are used as the green band. The FCC is designed in such a way that the forested areas appear greener than other vegetation types, such as grasses and shrubs. On the other hand, the croplands and barren lands are usually seen as red and water/snow is seen as blue. However, forests may not necessarily be greener than other perennial vegetation. To cope with this problem, an Enhanced Forest Cover Composite (EFCC) was designed by combining the annual median backscattering intensity of the VH (vertical transmit, horizontal receive) polarization data from the Sentinel-1 satellite with the green term of the FCC to suppress the green component (mean NDVI values) of the FCC over the non-forested vegetative areas. The performances of the FCC and EFCC were evaluated for the discrimination and classification of forested areas all over Japan with the support of reference data. The FCC and EFCC provided promising results, and the high-resolution forest map newly produced in the research provided better accuracy than the extant MODIS (Moderate Resolution Imaging Spectroradiometer) Land Cover Type product (MCD12Q1) in Japan. The composite images proposed in the research are expected to improve forest monitoring activities in other regions as well.

Unmanned aerial vehicles (UAV) provide an unprecedented capacity to monitor the development and dynamics of tree growth and structure through time. It is generally thought that the pruning of tree crops encourages new growth, has a positive effect on fruiting, makes fruit-picking easier, and may increase yield, as it increases light interception and tree crown surface area. To establish the response of pruning in an orchard of lychee trees, an assessment of changes in tree structure, i.e., tree crown perimeter, width, height, area and Plant Projective Cover (PPC), was undertaken using multi-spectral UAV imagery collected before and after a pruning event. While tree crown perimeter, width and area could be derived directly from the delineated tree crowns, height was estimated from a produced canopy height model and PPC was most accurately predicted based on the NIR band. Pre- and post-pruning results showed significant differences in all measured tree structural parameters, including an average decrease in tree crown perimeter of 1.94 m, tree crown width of 0.57 m, tree crown height of 0.62 m, tree crown area of 3.5 m2, and PPC of 14.8%. In order to provide guidance on data collection protocols for orchard management, the impact of flying height variations was also examined, offering some insight into the influence of scale and the scalability of this UAV-based approach for larger orchards. The different flying heights (i.e., 30, 50 and 70 m) produced similar measurements of tree crown width and PPC, while tree crown perimeter, area and height measurements decreased with increasing flying height. Overall, these results illustrate that routine collection of multi-spectral UAV imagery can provide a means of assessing pruning effects on changes in tree structure in commercial orchards, and highlight the importance of collecting imagery with consistent flight configurations, as varying flying heights may cause changes to tree structural measurements.

3D point cloud analysis of imagery collected by unmanned aerial vehicles (UAV) has been shown to be a valuable tool for estimation of crop phenotypic traits, such as plant height, in several species. Spatial information about these phenotypic traits can be used to derive information about other important crop characteristics, like fresh biomass yield, which could not be derived directly from the point clouds. Previous approaches have often only considered single date measurements using a single point cloud derived metric for the respective trait. Furthermore, most of the studies focused on plant species with a homogenous canopy surface. The aim of this study was to assess the applicability of UAV imagery for capturing crop height information of three vegetables (crops eggplant, tomato, and cabbage) with a complex vegetation canopy surface during a complete crop growth cycle to infer biomass. Additionally, the effect of crop development stage on the relationship between estimated crop height and field measured crop height was examined. Our study was conducted in an experimental layout at the University of Agricultural Science in Bengaluru, India. For all the crops, the crop height and the biomass was measured at five dates during one crop growth cycle between February and May 2017 (average crop height was 42.5, 35.5, and 16.0 cm for eggplant, tomato, and cabbage). Using a structure from motion approach, a 3D point cloud was created for each crop and sampling date. In total, 14 crop height metrics were extracted from the point clouds. Machine learning methods were used to create prediction models for vegetable crop height. The study demonstrates that the monitoring of crop height using an UAV during an entire growing period results in detailed and precise estimates of crop height and biomass for all three crops (R2 ranging from 0.87 to 0.97, bias ranging from −0.66 to 0.45 cm). The effect of crop development stage on the predicted crop height was found to be substantial (e.g., median deviation increased from 1% to 20% for eggplant) influencing the strength and consistency of the relationship between point cloud metrics and crop height estimates and, thus, should be further investigated. Altogether the results of the study demonstrate that point cloud generated from UAV-based RGB imagery can be used to effectively measure vegetable crop biomass in larger areas (relative error = 17.6%, 19.7%, and 15.2% for eggplant, tomato, and cabbage, respectively) with a similar accuracy as biomass prediction models based on measured crop height (relative error = 21.6, 18.8, and 15.2 for eggplant, tomato, and cabbage).

Image registration aligns two images geometrically, which is frequently required in medical, computer vision and remote-sensing field. It is a crucial pre-processing step in change detection or growth monitoring using satellite images. Accuracy of change detection depends on accuracy of image registration. For multi-modal, multi-sensor, multi-spectral satellite images one of the challenges for image registration is varying illumination level according to the sensor characteristics. This challenge is addressed by using Histogram of Oriented Gradient (HOG) along with Speeded-Up Robust Feature (SURF). It is shown that illumination variation gives some incorrect matches with SURF only which degrades image registration. Incorrect matches are reduced by using HOG as descriptor in SURF. Supporting simulation results for satellite images are presented which show the improvement in the correct matching rate. [ABSTRACT FROM AUTHOR]

Traditional methods to assess the soil organic carbon (SOC) content based on soil sampling and analysis are time consuming and expensive, and the results are influenced by the sampling design. The aim of this study was to investigate the potential of UAS (Unmanned Aerial Systems) multi-spectral imagery (480–1000 nm) for estimating the SOC content in bare cultivated soils at a high spatial resolution (12 cm). We performed UAS analysis on the Hoosfield Spring Barley experiment at Rothamsted (UK) where adjacent plots with distinctly different SOC contents, due to different long-term management practices, provide a valuable resource to evaluate this approach. We acquired images (wavelength: 480–550–670–780–880–1000 nm) at an altitude of 120 m over an area of 2 ha using a multi-spectral camera mounted on an UAS. The high-resolution images captured small-scale variations at the soil surface (e.g. shadows, tillage and wheels marks). After a projection in new dimensions by a PCA, we calibrated a support vector machine regression using observations from conventional soil sampling and SOC measurements. The performance of the calibration had a R 2 of 0.98 and a RMSE of 0.17%C. A cross-validation showed that the model was robust, with an average R 2 of 0.95 and a RMSE of 0.21%. An external validation dataset was used to evaluate the predicted spatial patterns of SOC content and a good fit with an RMSE 0.26%C was obtained. Although this study shows that the methodology has a clear potential for use in precision agriculture or monitoring important soil properties following changes in management, we also identify and discuss its limitations and current shortcomings. [ABSTRACT FROM AUTHOR]

The objective of this study is to develop high accuracy land cover classification algorithm for Global scale by using multi-temporal MODIS land reflectance products. In this study, time-domain co-occurrence matrix was introduced as a classification feature which provides time-series signature of land covers. Further, the non-parametric minimum distance classifier was introduced for time-domain co-occurrence matrix, which performs multi-dimensional pattern matching for time-domain co-occurrence matrices of a classification target pixel and each classification classes. The global land cover classification experiments have been conducted by applying the proposed classification method using 46 multi-temporal(in one year) SR(Surface Reflectance) and NBAR(Nadir BRDF-Adjusted Reflectance) products, respectively. IGBP 17 land cover categories were used in our classification experiments. As the results, SR and NBAR products showed similar classification accuracy of 99%. [ABSTRACT FROM AUTHOR]

This work describes our findings about an evaluation of the stability and the consistency of twenty primary PICSs (Pseudo-Invariant Calibration Sites). We present an analysis of 13 years of 8-daily MODIS products of BRDF parameters and white-sky-albedos (WSA) over the shortwave band. This time series of WSA and BRDFs shows the variation of the "stability" varies significantly from site to site. Using a 10x10 km window size over all the sites, the change in of WSA stability is around 4% but the isotropicity, which is an important element in inter-satellite calibration, can vary from 75% to 98%. Moreover, some PICS, especially, Libya-4 which is one of the PICS which is most employed, has significant and relatively fast changes in wintertime. PICS observations of BRDF/albedo shows that the Libya-4 PICS has the best performance but it is not too far from some sites such as Libya-1 and Mali. This study also reveals that Niger-3 PICS has the longest continuous period of high stability per year, and Sudan has the most isotropic surface. These observations have important implications for the use of these sites. [ABSTRACT FROM AUTHOR]

In the context of climate change, agricultural managers have the imperative to combine sufficient productivity with durability of the resources. Many studies have shown the interest of recent satellite missions as suitable tools for agricultural surveys. Nevertheless, they are not predictive methods. A system able to detect summer crops as early as possible is important in order to obtain valuable information for a better water management strategy. The detection of summer crops before the beginning of the irrigation period is therefore our objective. The study area is located near Toulouse (southwestern France), and is a region of mixed farming with a wide variety of irrigated and non-irrigated crops. Using the reference data for the years concerned, a set of fixed thresholds are applied to a vegetation index (the Normalized Difference Vegetation Index, NDVI) for each agricultural season of multi-spectral satellite optical imagery acquired at decametric spatial resolutions from 2006 to 2013. The performance (i.e., accuracy) is contrasted according to the agricultural practices, the development states of the different crops and the number of acquisition dates (one to three in the results presented here). The detection of summer crops reaches 64% to 88% with a single date, 80% to 88% with two dates and 90% to 99% with three dates. The robustness of this method is tested for several years (showing an impact of meteorological conditions on the actual choice of images), several sensors and several resolutions. [ABSTRACT FROM AUTHOR]

A multi-wavelengths analysis for pulse waveform extraction using laser speckle is conducted. The proposed system consists of three coherent light sources (532 nm, 635 nm, 850 nm). A bench-test composed of a moving skin-like phantom (silicone membrane) is used to compare the results obtained from different wavelengths. The system is able to identify a skin-like phantom vibration frequency, within physiological values, with a minimum error of 0.5 mHz for the 635 nm and 850 nm wavelengths and a minimum error of 1.3 mHz for the 532 nm light wavelength using a FFT-based algorithm. The phantom velocity profile is estimated with an error ranging from 27% to 9% using a bidimensional correlation coefficient-based algorithm. An in vivo trial is also conducted, using the 532 nm and 635 nm laser sources. The 850 nm light source has not been able to extract the pulse waveform. The heart rate is identified with a minimum error of 0.48 beats per minute for the 532 nm light source and a minimal error of 1.15 beats per minute for the 635 nm light source. Our work reveals that a laser speckle-based system with a 532 nm wavelength is able to give arterial pulse waveform with better results than those given with a 635 nm laser. [ABSTRACT FROM AUTHOR]

Viewing and illumination geometry has a strong influence on optical measurements of natural surfaces due to their anisotropic reflectance properties. Typically, cameras on-board unmanned aerial vehicles (UAVs) are affected by this because of their relatively large field of view (FOV) and thus large range of viewing angles. In this study, we investigated the magnitude of reflectance anisotropy effects in the 500–900 nm range, captured by a frame camera mounted on a UAV during a standard mapping flight. After orthorectification and georeferencing of the images collected by the camera, we calculated the viewing geometry of all observations of each georeferenced ground pixel, forming a dataset with multi-angular observations. We performed UAV flights on two days during the summer of 2016 over an experimental potato field where different zones in the field received different nitrogen fertilization treatments. These fertilization levels caused variation in potato plant growth and thereby differences in structural properties such as leaf area index (LAI) and canopy cover. We fitted the Rahman–Pinty–Verstraete (RPV) model through the multi-angular observations of each ground pixel to quantify, interpret, and visualize the anisotropy patterns in our study area. The Θ parameter of the RPV model, which controls the proportion of forward and backward scattering, showed strong correlation with canopy cover, where in general an increase in canopy cover resulted in a reduction of backward scattering intensity, indicating that reflectance anisotropy contains information on canopy structure. In this paper, we demonstrated that anisotropy data can be extracted from measurements using a frame camera, collected during a typical UAV mapping flight. Future research will focus on how to use the anisotropy signal as a source of information for estimation of physical vegetation properties.

[Display omitted] • Comparative analysis of the affinity interaction between two typical antipsychotics and HSA. • Combined multispectral and electrochemical methods compared the binding intensity of their interactions. • The two antipsychotics caused significant perturbations to the structure of the HSA. • Molecular docking demonstrated the existence of multiple forces during the interaction. Psychiatric disorders are common diseases with a high prevalence. Currently, increasing focus on the treatment of psychiatric disorders has driven the development and investigation of antipsychotic drugs. In this paper, two classical antipsychotic drugs risperidone (RIP) and paliperidone (PIP) were selected as research subjects to explore their action mechanism with biological macromolecule human serum albumin (HSA). Combined UV spectroscopy and time-resolved fluorescence spectroscopy results showed that the quenching of HSA by RIP/PIP was a static process, and this result was further confirmed by temperature-dependent experiments, while hydrogen bonding, electrostatic forces and hydrophobic forces existed in the above process. Furthermore, synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy and circular dichroism (CD) spectroscopy experiments demonstrated the effect on HSA before and after the addition of RIP/PIP. Electrochemical experiments results determined that K a of HSA and RIP/PIP system was 1.52 × 104 M−1–2.85 × 104 M−1. According to the competition experiments and molecular docking indicating RIP/PIP bound to site I of HSA. Finally, these results provided reliable information for the development of antipsychotic drugs. [ABSTRACT FROM AUTHOR]