Search

AMOLED (Active‐matrix organic light‐emitting diode) is a new type of display technology, mainly used in the field of smartphones. Temperature is an important environmental factor for AMOLED displays on their function and performance. Temperature difference can cause changes in the material characteristics of AMOLED displays. It will occur touch failure and inability to respond to users' operations. In order to reduce the adverse effects caused by temperature difference on touch, this paper studied the stability and reliability of different module materials in different temperature environments. The results showed that the module materials had a close relationship with the touch pattern during temperature changed. This paper further explored the pattern design parameter indicators to improve the touch performance of AMOLED through simulation experiments. This study provided a theoretical basis for optimizing the touch function and performance of AMOLED. [ABSTRACT FROM AUTHOR]

Setaria italica is an important crop in China that plays a vital role in the Chinese dietary structure. In the last several decades, high temperature has become the most severe climate issue in the world, which causes great harm to the yield and quality formation of millet. In this study, two main cultivated varieties (ZG2 and AI88) were used to explore the photosynthesis and yield index of the whole plant under heat stress. Results implied that photosynthesis was not inhibited during the heat stress, and that the imbalance in sugar transport between different tissues may be the main factor that affects yield formation. In addition, the expression levels of seven SiSUT and twenty-four SiSWEET members were explored. Sugar transporters were heavily affected during the heat stress. The expression of SiSWEET13a was inhibited by heat stress in the stems, which may play a vital role in sugar transport between different tissues. These results provide new insights into the yield formation of crops under heat stress, which will provide guidance to crop breeding and cultivation. [ABSTRACT FROM AUTHOR]

Ion doping is an effective strategy for achieving high‐performance flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells by defect regulations. Here, a Li&Na co‐doped strategy is applied to synergistically regulate defects in CZTSSe bulks. The quality absorbers with the uniformly distributed Li and Na elements are obtained using the solution method, where the acetates (LiAc and NaAc) are as additives. The concentration of the harmful CuZn anti‐site defects is decreased by 8.13% after Li incorporation, and that of the benign NaZn defects is increased by 36.91% after Na incorporation. Synergistic Li&Na co‐doping enhances the carrier concentration and reduces the interfacial defects concentration by one order of magnitude. As a result, the flexible CZTSSe solar cell achieves a power conversion efficiency (PCE) of 10.53% with certified 10.12%. Because of the high PCE and the homogeneous property, the Li&Na co‐doped device is fabricated to a large area (2.38 cm2) and obtains 9.41% PCE. The co‐doping investigation to synergistically regulate defects provides a new perspective for efficient flexible CZTSSe solar cells. [ABSTRACT FROM AUTHOR]

Ionic liquids (ILs) are molten organic salts consisting of organic cations and weakly coordinating organic/inorganic anions at room temperature. ILs have excellent physical and chemical properties such as high thermal stability, high combustible temperature, high miscibility with organic compounds and so on, making them good candidates for high performance lubricants and lubricant additives. The functional designability of ILs makes them novel lubrication materials that can break through the bottleneck of the active control of friction and lubrication. This paper firstly briefly introduces how to design the physical and chemical properties of the ILs required for different friction conditions by bonding specific cations with anions. Then, the lubrication mechanisms of ILs as base lubricants and additives for oils and water are focused on. The correlation between the structure of ILs and the lubrication results are established, which can guide the structural design of ILs in different applications. The response behaviors of friction characteristics under external electric fields are analyzed, which can provide a theoretical basis for the intelligent control of friction based on ILs. [ABSTRACT FROM AUTHOR]

Examining the association between dietary patterns and colorectal cancer (CRC) risk can provide valuable insights beyond the assessment of individual foods or nutrients. However, there is a lack of in-depth analysis of dietary patterns and CRC risk in Chinese populations, and few studies have compared dietary patterns derived from different posteriori methods with the aim of predicting disease risk. The aim of this study was to derive dietary patterns using both principal component analysis (PCA) and cluster analysis (CA) and to assess their respective associations with CRC risk. A large-scale case-control study was conducted in Guangdong Province, China, including 2799 incident colorectal cancer cases and an equal number of frequency-matched controls. Dietary intake information was gathered through the use of a validated food frequency questionnaire. PCA and CA were used to derive dietary patterns. A multivariable logistic regression model was used to calculate the adjusted odds ratio (aOR) and 95% confidence interval (CI). Four major dietary patterns were identified by PCA. CA identified two dietary patterns, referred to as the "Balanced dietary pattern" and the "Refined grain dietary pattern". Notably, there were significant inverse associations between the milk-egg-nut-soy dietary pattern (aOR, 0.51; 95% CI, 0.42, 0.62), the vegetable-fruit dietary pattern (aOR, 0.61; 95%CI, 0.51, 0.74), and the poultry-fish dietary pattern (aOR, 0.81; 95%CI, 0.68, 0.97) and CRC risk. However, the red meat-preserved food dietary pattern was associated with an increased risk of CRC (aOR, 2.99; 95%CI, 2.43, 3.67). When compared with the Refined grain dietary pattern, the Balanced dietary pattern showed a decreased risk of CRC (aOR, 0.59; 95%CI, 0.52, 0.66). The results from the comparison of the two methods indicate that both CA and PCA derived remarkably similar patterns. The combined use of PCA and CA identified consistent underlying patterns, showing comparable associations with CRC risk. These findings suggest that individuals who prefer dietary patterns characterized by a high intake of red meat, preserved food, and refined grains should be cautious about their increased CRC risk. Conversely, dietary patterns rich in fruits, vegetables, and high-quality protein sources are advisable for the prevention of CRC in the Chinese population. [ABSTRACT FROM AUTHOR]

The energy consumption loss is high particularly in manufacturing processes involving heating furnaces. Moreover, the mandatory constraints in continuous heating stage bring difficult challenges to production scheduling. To improve the production efficiency and reduce the energy consumption in a hybrid flow shop with continuous and discrete processing stages, this study developed an adaptive selection multi-objective optimization algorithm with preference (ASMOAP). The mandatory constraints of continuous processing stage are transformed into one of the optimization objectives, which is defined as maximum excess value of adjustment time in this paper. A multi-objective optimization scheduling model with the makespan, energy consumption, and maximum excess of adjustment time is established. The optimization preference is designed in the proposed multi-objective optimization algorithm. The maximum excess of adjustment time is set as the multi-objective optimization preference. Three adaptive selection strategies are designed for the algorithm based on the proportions of outstanding and preference individuals to eliminate constraint conflicts. Presented results prove that the proposed algorithm could effectively solve hybrid flow shop scheduling problem considering discrete and continuous processing stages with limited time. It can be applied to obtain a better feasible solution while improving the efficiency and reducing the energy consumed in practical production processes. [ABSTRACT FROM AUTHOR]