Search

The biomass production potential at temperate latitudes (56°N), and the quality of the biomass for energy production (anaerobic digestion to methane and direct combustion) were investigated for the green macroalgae, Ulva lactuca. The algae were cultivated in a land based facility demonstrating a production potential of 45T (TS) ha(-1) y(-1). Biogas production from fresh and macerated U. lactuca yielded up to 271 ml CH(4) g(-1) VS, which is in the range of the methane production from cattle manure and land based energy crops, such as grass-clover. Drying of the biomass resulted in a 5-9-fold increase in weight specific methane production compared to wet biomass. Ash and alkali contents are the main challenges in the use of U. lactuca for direct combustion. Application of a bio-refinery concept could increase the economical value of the U. lactuca biomass as well as improve its suitability for production of bioenergy., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Mixtures of n-octadecyltrimethoxysilane (C18, 1-5 mole-%), n-octyltriethoxysilane (C8) and tetraethoxysilane (TEOS) gave xerogel surfaces of varying topography. The 1:49:50 C18/C8/TEOS xerogel formed 100-400-nm-wide, 2-7-nm deep pores by AFM while coatings with ≥3% C18 were free of such features. Segregation of the coating into alkane-rich and alkane-deficient regions in the 1:49:50 C18/C8/TEOS xerogel was observed by IR microscopy. Immersion in ASW for 48 h gave no statistical difference in surface energy for the 1:49:50 C18/C8/TEOS xerogel and a significant increase for the 50:50 C8/TEOS xerogel. Settlement of barnacle cyprids and removal of juvenile barnacles, settlement of zoospores of the alga Ulva linza, and strength of attachment of 7-day sporelings were compared amongst the xerogel formulations. Settlement of barnacle cyprids was significantly lower in comparison to glass and polystyrene standards. The 1:49:50 and 3:47:50 C18/C8/TEOS xerogels were comparable to PDMSE with respect to removal of juvenile barnacles and sporeling biomass, respectively.

The facile preparation of amphiphilic network coatings having a hydrophobic dimethacryloxy-functionalized perfluoropolyether (PFPE-DMA; M(w) = 1500 g mol(-1)) crosslinked with hydrophilic monomethacryloxy functionalized poly(ethylene glycol) macromonomers (PEG-MA; M(w) = 300, 475, 1100 g mol(-1)), intended as non-toxic high-performance marine coatings exhibiting antifouling characteristics is demonstrated. The PFPE-DMA was found to be miscible with the PEG-MA. Photo-cured blends of these materials containing 10 wt% of PEG-MA oligomers did not swell significantly in water. PFPE-DMA crosslinked with the highest molecular weight PEG oligomer (ie PEG1100) deterred settlement (attachment) of algal cells and cypris larvae of barnacles compared to a PFPE control coating. Dynamic mechanical analysis of these networks revealed a flexible material. Preferential segregation of the PEG segments at the polymer/air interface resulted in enhanced antifouling performance. The cured amphiphilic PFPE/PEG films showed decreased advancing and receding contact angles with increasing PEG chain length. In particular, the PFPE/PEG1100 network had a much lower advancing contact angle than static contact angle, suggesting that the PEG1100 segments diffuse to the polymer/water interface quickly. The preferential interfacial aggregation of the larger PEG segments enables the coating surface to have a substantially enhanced resistance to settlement of spores of the green seaweed Ulva, cells of the diatom Navicula and cypris larvae of the barnacle Balanus amphitrite as well as low adhesion of sporelings (young plants) of Ulva, adhesion being lower than to a polydimethyl elastomer, Silastic T2.

Siloxane-polyurethane fouling-release (FR) coatings based on aminopropyl terminated poly(dimethylsiloxane) (PDMS) macromers were prepared and characterized for FR performance via laboratory biological assays. These systems rely on self-stratification, resulting in a coating with a siloxane-rich surface and polyurethane bulk. Previously, these coating systems have used PDMS with multiple functional groups which react into the polyurethane bulk. Here, aminopropyl terminated PDMS macromers were prepared, where a single amine group anchors the PDMS in the coating. Coatings were prepared with four molecular weights (1000, 5000, 10,000, and 15,000 g mol⁻¹) and two levels of PDMS (5% and 10%). High water contact angles and low surface energies were observed for the coatings before and after water immersion, along with low pseudobarnacle removal forces. Laboratory bioassays showed reduced biofilm retention of marine bacteria, good removal of diatoms from coatings with low molecular weight PDMS, high removal of algal sporelings (young plants), and low removal forces of live barnacles.

Wettability is one of the surface characteristics that is controlled by the chemical composition and roughness of a surface. A number of investigations have explored the relationship between water contact angle and surface free energy of polymeric coatings with the settlement (attachment) and adhesion strength of various marine organisms. However, the relationship between the contact angle hysteresis and fouling-release property is generally overlooked. In the present work, coatings were prepared by using commercial hydrophobic homopolymer and copolymer polyolefins, which have nearly the same surface free energy. The effects of contact angle hysteresis, wetting hysteresis, and surface free energy on the fouling-release properties for sporelings of the green alga Ulva from substrates were then examined quantitatively under a defined shear stress in a water channel. The ease of removal of sporelings under shear stress from the polymer surfaces was in the order of PP>HDPE>PPPE>EVA-12 and strongly and positively correlated with contact angle and wetting hysteresis; i.e., the higher the hysteresis, the greater the removal.

In the summer of 2008, the world's largest green-tide occurred in the Yellow Sea, China. The hypothesized cause was the expansion of Porphyra yezoensis aquaculture along the Jiangsu coastline and the re-occurrence of a green-tide in 2009 was predicted. In this study, satellite and field images showed the formation of the June 2009 green-tide which again originated from the Jiangsu coast. The responsible species, its source and biomass accumulation were studied to support the previous hypothesis. Morphological and phylogenetic analysis demonstrated the homology of Ulva prolifera in the 2008 green-tide with the U. prolifera from P. yezoensis aquaculture rafts. About 91-505kg/ha of U. prolifera was attached to the P. yezoensis aquaculture rafts and a total biomass of 4956 tonnes was estimated during the harvesting of P. yezoensis. This is sufficient to seed a bloom when they are dislodged from the rafts as a result of harvesting practices., (Copyright 2010 Elsevier Ltd. All rights reserved.)

A correlation between the attachment density of cells from two phylogenetic groups (prokaryotic Bacteria and eukaryotic Plantae), with surface roughness is reported for the first time. The results represent a paradigm shift in the understanding of cell attachment, which is a critical step in the biofouling process. The model predicts that the attachment densities of zoospores of the green alga, Ulva, and cells of the marine bacterium, Cobetia marina, scale inversely with surface roughness. The size and motility of the bacterial cells and algal spores were incorporated into the attachment model by multiplying the engineered roughness index (ERI(II)), which is a representation of surface energy, by the Reynolds number (Re) of the cells. The results showed a negative linear correlation of normalized, transformed attachment density for both organisms with ERI(II) x Re (R(2) = 0.77). These studies demonstrate for the first time that organisms respond in a uniform manner to a model, which incorporates surface energy and the Reynolds number of the organism.

In 2008, Qingdao (36 degrees 06'N, 120 degrees 25'E, PR China) experienced the world largest drifting macroalgal bloom composed of the filamentous macroalga Ulva prolifera. No convincing biologic evidence regarding the algal source is available so far. A series of field collections of both Ulva sp. and waters in various sites along Jiangsu coasts were conducted in March to May of 2009. Density of microscopic Ulva germlings in the waters sampled from different sites ranged from 7 to 3140 individuals L(-1), indicating the wide-spreading and long-term existence of the algae in the investigated region. Morphological and the nuclear ribosomal internal transcribed spacer ITS nrDNA and the chloroplast-encoded rbcL gene comparisons of 26 algal samples revealed that the algae collected from land-based animal aquaculture ponds mostly resembled the dominating blooming alga in 2008. Mismatch of Porphyra farming period with the occurrence of the green tide bloom, as well as the negative identification results of the sampled green algae from the Porphyra rafts eliminated Porphyra rafts as the principal and original source of the dominating blooming alga., (Copyright 2009 Elsevier Ltd. All rights reserved.)

Ulva prolifera, a common green seaweed, is one of the causative species of green tides that occurred frequently along the shores of Qingdao in 2008 and had detrimental effects on the preparations for the 2008 Beijing Olympic Games sailing competition, since more than 30 percent of the area of the games was invaded. In view of the rapid accumulation of the vast biomass of floating U. prolifera in green tides, we investigated the formation of sporangia in disks of different diameters excised from U. prolifera, changes of the photosynthetic properties of cells during sporangia formation, and development of spores. The results suggested that disks less than 1.00 mm in diameter were optimal for the formation of sporangia, but there was a small amount of spore release in these. The highest percentage of area of spore release occurred in disks that were 2.50 mm in diameter. In contrast, sporangia were formed only at the cut edges of larger disks (3.00 mm, 3.50 mm, and 4.00 mm in diameter). Additionally, the majority of spores liberated from the disks appeared vigorous and developed successfully into new individuals. These results implied that fragments of the appropriate size from the U. prolifera thalli broken by a variety of factors via producing spores gave rise to the rapid proliferation of the seaweed under field conditions, which may be one of the most important factors to the rapid accumulation of the vast biomass of U. prolifera in the green tide that occurred in Qingdao, 2008.

Previous studies have shown that elevated nitric oxide (NO) reduces adhesion in diatom, bacterial and animal cells. This article reports experiments designed to investigate whether elevated NO reduces the adhesion of zoospores of the green alga Ulva, an important fouling species. Surface-normalised values of NO were measured using the fluorescent indicator DAF-FM DA and parallel hydrodynamic measurements of adhesion strength were made. Elevated levels of NO caused by the addition of the exogenous NO donor SNAP reduced spore settlement by 20% and resulted in lower adhesion strength. Addition of the NO scavenger cPTIO abolished the effects of SNAP on adhesion. The strength of attachment and NO production by spores in response to four coatings (Silastic T2; Intersleek 700; Intersleek 900 and polyurethane) shows that reduced adhesion is correlated with an increase in NO production. It is proposed that in spores of Ulva, NO is used as an intracellular signalling molecule to detect how conducive a surface is for settlement and adhesion. The effect of NO on the adhesion of a range of organisms suggests that NO-releasing coatings could have the potential to control fouling.

In this article we describe the technical aspects of digital in-line holographic microscopy to track multiple macrofouling Ulva linza zoospores simultaneously during their exploration of surfaces. Using an effective method of artefact suppression at the edges of holograms in combination with projection of volume reconstructions, a fast algorithm was developed which allows a reliable determination of a large number of subsequent spore positions. Thus, statistical analysis of swimming behaviour in the vicinity of surfaces becomes possible. Using glass surfaces as example, velocity and diving direction distributions are calculated and the swimming behaviour is statistically analysed. Diving direction analysis provides a straightforward way to determine segments within traces with surface contact. The presented method of data analysis allows high throughput analysis of holographic microscopy data and sets the basis for different applications including biofouling.

This work aims to assess the potential of the green seaweed Ulva fasciata Delile as an alternative source of dietary fibre (DF). Total DF content was determined, some of its physico-chemical properties described and the physiological effects of U. fasciata meal on rats fed a hypercholesterolemic diet were investigated. U. fasciata may be considered a potential alternative source of DF with a total content of about 400 g.kg-1 (dry basis) and interesting physico-chemical properties: water retention capacity of 8.74 g/water.g-1 dry sample (seaweed meal) and 0.90 (seaweed carbohydrate extract), lipid adsorption capacity of 4.52 g/oil.g-1 dry sample (seaweed meal) and 5.70 (seaweed carbohydrate extract), intrinsic viscosity of 2.4 dl.g-1 (seaweed carbohydrate extract) and cation exchange capacity of 3.51 Eq.kg-1 (seaweed carbohydrate extract). The diet containing seaweed meal was able to keep rats' total cholesterol (TC) down without causing any undesirable increase in LDL-C fraction. No evidence of toxic and/or antinutritional components in the seaweed meal was detected. Rats showed a fecal volume much greater (13 g) than that fed on cellulose diet (7 g) (p < 0.05). These properties confer on the seaweed the potential to be used in food technology for the acquisition of low-calorie food and might be important in body weight control, reduction of blood TC and LDL-C as well as in prevention of gastrointestinal diseases.

N-acylhomoserine lactone (AHL) quorum-sensing molecules modulate the swimming behaviour of zoospores of the macroalga Ulva to facilitate the location of bacterial biofilms. Here we show that the intertidal surfaces colonized by Ulva are dominated by Alphaproteobacteria, particularly the Rhodobacteraceae family, and the Bacteroidetes family Flavobacteriaceae, and that this diverse assemblage both produces and degrades AHLs. N-acylhomoserine lactones could also be extracted from the surfaces of pebbles recovered from intertidal rock-pools. Bacteria representative of this assemblage were isolated and tested for the production and degradation of AHLs, and for their ability to modulate zoospore settlement at different biofilm densities. Of particular interest was a Shewanella sp. This strain produced three major AHLs (OC4, OC10 and OC12) in the late exponential phase, but the longer-chain AHLs were rapidly degraded in the stationary phase. Degradation occurred via both lactonase and amidase activity. A close relationship was found between AHL synthesis and Ulva zoospore settlement. The Shewanella isolate also interfered with AHL production by a Sulfitobacter isolate and its ability to enhance zoospore settlement in a polymicrobial biofilm. This influence on the attachment of Ulva zoospores suggests that AHL-degrading strains can affect bacterial community behaviour by interfering with quorum sensing between neighbouring bacteria. More importantly, these interactions may exert wider ecological effects across different kingdoms.

Fouling-release coatings were prepared from blends of a fluorinated/siloxane copolymer with a poly(dimethyl siloxane) (PDMS) matrix in order to couple the low modulus character of PDMS with the low surface tension typical for fluorinated polymers. The content of the surface-active copolymer was varied in the blend over a broad range (0.15-10 wt % with respect to PDMS). X-ray photoelectron spectroscopy depth profiling analyses were performed on the coatings to establish the distribution of specific chemical constituents throughout the coatings, and proved enrichment in fluorine of the outermost layers of the coating surface. Addition of the fluorinated/siloxane copolymer to the PDMS matrix resulted in a concentration-dependent decrease in settlement of barnacle, Balanus amphitrite, cyprids. The release of young plants of Ulva, a soft fouling species, and young barnacles showed that adhesion strength on the fluorinated/siloxane copolymer was significantly lower than the siloxane control. However, differences in adhesion strength were not directly correlated with the concentration of copolymer in the blends.

The proteinaceous nature of the adhesives used by most fouling organisms to attach to surfaces suggests that coatings incorporating proteolytic enzymes may provide a technology for the control of biofouling. In the present article, the antifouling (AF) and fouling release potential of model coatings incorporating the surface-immobilized protease, Subtilisin A, have been investigated. The enzyme was covalently attached to maleic anhydride copolymer thin films; the characteristics of the bioactive coatings obtained were adjusted through variation of the type of copolymer and the concentration of the enzyme solution used for immobilization. The bioactive coatings were tested for their effect on the settlement and adhesion strength of two major fouling species: the green alga Ulva linza and the diatom Navicula perminuta. The results show that the immobilized enzyme effectively reduced the settlement and adhesion strength of zoospores of Ulva and the adhesion strength of Navicula cells. The AF efficacy of the bioactive coatings increased with increasing enzyme surface concentration and activity, and was found to be superior to the equivalent amount of enzyme in solution. The results provide a rigorous analysis of one approach to the use of immobilized proteases to reduce the adhesion of marine fouling organisms and are of interest to those investigating enzyme-containing coating technologies for practical biofouling control.

The interspecific competition between Ulva pertusa and Grateloupia filicina and it's response to the UV-B irradiation enhancement were analyzed using mono-culture and co-culture methods. The study adopted reasonable experimental design and took biomass as the main examined index. Results showed that the relation of interspecific competition included both allelopathy effect and nutrient competition. Specific growth rates of U. pertusa under treatment with abundant nutrition and limited nutrition was 2.54 and 2.47 times of those of G. filicina. Thus, compared to U. pertusa, G. filicina was in inferior position. UV-B irradiation could inhibit the growth of U. pertusa and G. filicina under the condition of mono-culture. The higher the dosage and the longer exposure of UV-B irradiation were, the more significant the inhibitive effect was. When they were cultured together, low dosage [1.6 kJ x (m2 x d)(-1)] and medium dosage [4.8 kJ x(m2 x d)(-1)] of UV-B irradiation reduced the competitive ability of U. pertusa, and weights of U. pertusa and G. filicina declined 6.81% and 3.88% in low dosage, and 10.47% and 6.98% in medium dosage, respectively. So the relation of interspecific competition tended to be at a balanced level even though U. pertusa was still the dominant algae. However, on the 12th day, weight of U. pertusa decreased by 13.09%, but the value of G. filicina was 14.72%, which was higher than that of U. pertusa. Therefore, high dosage [9.6 kJ x (m2 x d)(-1)] of UV-B irradiation had more serious inhibitive effect on G. filicina, and competitive dominant position of U. pertusa tended to be more obvious. Thus, UV-B changed the relation of competitive balance of U. pertusa and G. filicina, which changed along with the dosage of UV-B. Moreover, UV-B irradiation might influence the metabolism of the allelochemicals produced by U. pertusa and G. filicina in a long time.

Attachment of spores of Ulva fasciata to natural biofilms was examined to probe the basis for specificity in settlement. Within 30 min from initial exposure in laboratory assays, spores attached to 1-, 3-, 6- or 9-day biofilms formed on acid-cleaned glass slides. The greatest number of spores attached to biofilms aged for 6-day (573.3 +/- 45 spores mm2, p<0.025). The Morisita Index (MI) was used to investigate relationships between the spatial pattern of spores on natural biofilms, and was found to be random for 1-, 3- and 6-day biofilms (MI = 0.93, 0.98 and 0.95, respectively), but non-random on 9-day biofilms (0.82). In addition to the attachment of spores to natural biofilms, experimentally manipulated biofilms that provided potentially specific receptor sites were studied. Epifluorescence microscopy of 1-day biofilms confirmed that experimental sugar was incorporated into natural biofilms. The Jacalin galactose specific probe showed a homogeneous pattem of galactose incorporation on biofilms, whereas Concanavalin Aprobe (mannose) showed a discrete pattem for this sugar. Similarly, the addition offetuin to a biofilm was detected as a heterogeneous pattern. Rapid spore attachment of U. fasciata found on natural biotilms was induced by fetuin (1-day: 1482 +/- 46.6 spores mm2); specific molecules similar to fetuin may play a role in triggering settlement Specific sugars and their analogs are important surface receptors and play an integral role in attachment of Ulva fasciata spores to aged biofilms. Biofilm age and the role of specific sugars on attachment are discussed.

Assessment and down-selection of non-biocidal coatings that prevent the adhesion of fouling organisms in the marine environment requires a hierarchy of laboratory methods to reduce the number of experimental coatings for field testing. Automated image-based methods are described that facilitate rapid, quantitative biological screening of coatings generated through combinatorial polymer chemistry. Algorithms are described that measure the coverage of bacterial and algal biofilms on coatings prepared in 24-well plates and on array panels, respectively. The data are used to calculate adhesion strength of organisms on experimental coatings. The results complement a number of physical and mechanical methods developed to screen large numbers of samples.

Algal spores respond to many environmental variables, especially to chemical "cues". This chemotactic response can be utilized to attract spores, thereby colonization of a new substrata is possible to be influenced. In this attempt, four chemoattractant candidates were screened against spores of Ulva pertusa to reveal their efficiencies. Attachment and subsequent germination of Ulva spores were effectively influenced by these chemoattractant candidates. In particular 100 microg cm2 of D-glucose coating was found to enhance spore attachment by > 150%. Furthermore, field investigations carried out with test panels, clearly indicate the chemoattractive properties of test coatings. In recent years, various anthropogenic activities and natural hazards cause detrimental impacts on the benthic algae and other fishery resources. Artificial reefs have been laid on many coastal regions to increase or restore marine resources. Chemoattractant coatings can be applied on artificial surfaces to increase the colonization of benthic forms. It also can be used in the mariculture devices. Influence of chemoattractants on Ulva spores and fouling biomass estimated on test panels are discussed.

A toxicity test using spore release of the aquatic green alga, Ulva, was developed and evaluated by assessing the toxicity of different organic and inorganic chemicals and elutriates of sewage or waste sludge. The toxic ranking of four metals was: Cu (EC50 of 0.040mgL(-1))>Cd (0.095mgL(-1))>Pb (0.489mgL(-1))>Zn (0.572mgL(-1)). The EC50 for TBTO ranged from 24 to 63microgL(-1). The most toxic VOC was formalin (EC50 of 0.788microlL(-1)) and the least toxic was acetone. Spore release was significantly inhibited in all elutriates; the greatest and least toxic effects were for industrial sewage (3.29%) and filtration bed (10.08%), respectively. The bioassay is simple, inexpensive and sensitive. The cosmopolitan distribution of Ulva means that the test would have a potential application worldwide.

A model describing macroalgal early life stages and adult dynamics was used to quantify the effects of non-adult forms on the productivity of adult macroalgae in a eutrophic estuary. Predictions indicate that during years with mild winters and low rainfall, spring blooms will occur at the expense of the growth and reproduction of overwintering adults and without the contribution of the spore bank. In these circumstances, there is a positive correlation between the intensity of the blooms and the biomass of overwintering adults until a maximum threshold value. On the contrary, in years with high rainfall and low or inexistent biomass of overwintering adults, the onset of adult's growth depends on the biomass of viable dormant spores, the growing season occurs later and adult productivity is very limited. Long-term predictions for climate change scenarios suggest that, in general, global warming will have adverse affects on Ulva intestinalis productivity, with the adults being more affected than the early life stages.

Green macroalgal blooms have substantially altered marine community structure and function, specifically by smothering seagrasses and other primary producers that are critical to commercial fisheries and by creating anoxic conditions in enclosed embayments. Bottom-up factors are viewed as the primary drivers of these blooms, but increasing attention has been paid to biotic controls of species composition. In Washington State, USA, blooms are often dominated by Ulva spp. intertidally and Ulvaria obscura subtidally. Factors that could cause this spatial difference were examined, including competition, grazer preferences, salinity, photoacclimation, nutrient requirements, and responses to nutrient enrichment. Ulva specimens grew faster than Ulvaria in intertidal chambers but not significantly faster in subtidal chambers. Ulva was better able to acclimate to a high-light environment and was more tolerant of low salinity than Ulvaria. Ulvaria had higher tissue N content, chlorophyll, chlorophyll b: chlorophyll a, and protein content than Ulva. These differences suggest that nitrogen availability could affect species composition. A suite of five grazers preferred Ulva to Ulvaria in choice experiments. Thus, bottom-up factors allow Ulva to dominate the intertidal zone while resistance to grazers appears to allow Ulvaria to dominate the subtidal zone. While ulvoid algae are in the same functional-form group, they are not functionally redundant.

Identification of settlement cues for marine fouling organisms opens up new strategies and methods for biofouling prevention, and enables the development of more effective antifouling materials. To this end, the settlement behaviour of zoospores of the green alga Ulva linza onto cationic oligopeptide self-assembled monolayers (SAMs) has been investigated. The spores interact strongly with lysine- and arginine-rich SAMs, and their settlement appears to be stimulated by these surfaces. Of particular interest is an arginine-rich oligopeptide, which is effective in attracting spores to the surface, but in a way which leaves a large fraction of the settled spores attached to the surface in an anomalous fashion. These 'pseudo-settled' spores are relatively easily detached from the surface and do not undergo the full range of cellular responses associated with normal commitment to settlement. This is a hitherto undocumented mode of settlement, and surface dilution of the arginine-rich peptide with a neutral triglycine peptide demonstrates that both normal and anomalous settlement is proportional to the surface density of the arginine-rich peptide. The settlement experiments are complemented with physical studies of the oligopeptide SAMs, before and after extended immersion in artificial seawater, using infrared spectroscopy, null ellipsometry and contact angle measurements.

This article reports on the preparation and partial characterisation of silicone-based coatings filled with low levels of either synthetic multiwall carbon nanotubes (MWCNTs) or natural sepiolite (NS). The antifouling and fouling-release properties of these coatings were explored through laboratory assays involving representative soft-fouling (Ulva) and hard-fouling (Balanus) organisms. The bulk mechanical properties of the coatings appeared unchanged by the addition of low amounts of filler, in contrast to the surface properties, which were modified on exposure to water. The release of Ulva sporelings (young plants) was improved by the addition of low amounts of both NS and MWCNTs. The most profound effect recorded was the significant reduction of adhesion strength of adult barnacles growing on a silicone elastomer containing a small amount (0.05%) of MWCNTs. All the data indicate that independent of the bulk properties, the surface properties affect settlement, and more particularly, the fouling-release behaviour, of the filled materials.

Environmental impacts caused by tin and copper based commercial antifouling (AF) paints were proved to be detrimental to aquatic ecosystems. Therefore, a search of environmental friendly AF compounds to be used in marine paint to protect the surface of maritime developmental structures from the unwanted biofouling is a burning issue of the present time. Commercially available eight organic chemicals--allyl isothiocyanate, beta-myrecene, cis-3-hexenyl acetate, citral, ethyl heptanoate, eugenol, methyl caproate, and octyl alcohol were evaluated forAF activities using both laboratory and field assays. The test chemicals were found to repel the target motile marine bacteria--Alteromonas marina, Bacillus atrophaeus, Roseobactergallaeciensis and Shewanella oneidensis and motile spores of the green alga, Ulva pertusa. The bacterial and Ulva spore repulsion activities of the test chemicals were measured by chemotaxis and agar diffusion methods respectively interestingly these test chemicals were less toxic to the test fouling species. The toxicity of the test chemicals was measured by using antibiotic assay disks against the bacteria and motility test against Ulva spores. Moreover, in field assay, all test chemicals showed a perfect performance ofAF activity showing no fouling during the experimental period of one year Such results and commercial as well as technical feasibility of the test chemicals firmly showed the possibility of using as alternatives of the existing toxic AF agents.

The green seaweed Ulva has been shown to detect signal molecules produced by bacteria. Biofilms that release N-acylhomoserine lactones (AHLs) attract zoospores--the motile reproductive stages of Ulva. The evidence for AHL involvement is based on several independent lines of evidence, including the observation that zoospores are attracted to wild-type bacteria that produce AHLs but are not attracted to mutants that do not produce signal molecules. Synthetic AHL also attracts zoospores and the attraction is lost in the presence of autoinducer inactivation (AiiA) protein. The mechanism of attraction is not chemotactic but involves chemokinesis. When zoospores detect AHLs, the swimming rate is reduced and this results in accumulation of cells at the source of the AHL. It has been demonstrated that the detection of AHLs results in calcium influx into the zoospore. This is the first example of a calcium signalling event in a eukaryote in response to bacterial quorum sensing molecules. The role of AHLs in the ecology of Ulva is discussed. It is probable that AHLs act as cues for the settlement of zoospores, rather than being directly involved as a signalling mechanism.

The settlement and adhesion of Navicula perminuta and Ulva linza to methyl-terminated alkanethiol self-assembled monolayers (SAMs) of increasing chain length has been investigated. Organisms were allowed to settle onto the monolayers and were subsequently exposed to hydrodynamic shear stress in order to determine their adhesion strength. Results show that as the SAM structure changes from amorphous to crystalline (C14), there is a marked change in the adhesion of N. perminuta and U. linza. Given that the SAMs in the series all exhibit similar contact angle behaviour and surface energy, it is hypothesized that the lubricity of the surface plays a role in determining the surface adhesion.

A spatially dynamic model for the productivity of spores and adults of green macroalgae (Enteromorpha sp.) was developed for a mesotidal estuary (Mondego estuary, Portugal). Many of the algal processes and parameters included in the model were experimentally obtained. Model predictions were compared to a real time series (1993-1997) of macroalgal biomass variation and the two sets show a good agreement (ANOVA, P<0.001). Results suggest that algal growth is highly sensitive to small changes in depth and exhibits different patterns of variation in different seasons. On a yearly basis, global calculations for the south channel of the estuary (137 ha) suggest that during bloom years, macroalgal biomass may reach about 21,205 ton DW compared to 240 ton DW in regular years. On a seasonal basis, the difference may be even more significant. The consequences of such variations on the nitrogen and phosphorus loading of the system and the adjacent coastal area are discussed.

In recent years, industrial pollutants and the mountain forest fire ashes released into seawater cause damage to the marine environment, mainly it reduces the algal productivity in the inter tidal region. To get recover from the stress due to pollutants and to increase the growth and development of biofouling algae (benthic organisms), Ecklonia cava extract was investigated for its biofouling attracting efficiency. Bioactive guided fractions of E. cava extract derived from column chromatography were tested against spore attachment of a fouling alga, Ulva pertusa. Fraction B showed increased spore attachment rate with a maximum of 92 +/- 5%. This fraction was further analysed on HPLC, GC-Mass and NMR, deduced as pentadecanoic acid.

In order to facilitate a semi-high throughput approach to the evaluation of novel fouling-release coatings, a 'spinjet' apparatus has been constructed. The apparatus delivers a jet of water of controlled, variable pressure into the wells of 24-well plates in order to facilitate measurement of the strength of adhesion of algae growing on the base of the wells. Two algae, namely, sporelings (young plants) of the green macroalga Ulva and a diatom (Navicula), were selected as test organisms because of their opposing responses to silicone fouling-release coatings. The percentage removal of algal biofilm was positively correlated with the impact pressure for both organisms growing on all the coating types. Ulva sporelings were removed from silicone elastomers at low impact pressures in contrast to Navicula cells which were strongly attached to this type of coating. The data obtained for the 24-well plates correlated with those obtained for the same coatings applied to microscope slides. The data show that the 24-well plate format is suitable for semi-high throughput screening of the adhesion strength of algae.

Screening of test chemicals or formulations for antifouling (AF) activity is important to get first hand information on their nontoxic repelling activities. Especially spores of a fouling alga, Ulva pertusa were used in this study to test the AF efficiency of five organic chemicals. Coatings made with 100 microg cm2 of citral and eugenol significantly inhibited the spore attachment. A low concentration (1 microg cm2) of solanesol exhibited effective AF activity against spore attachment. Spore germination was sensitive to different AF candidates screened in this study. Based on the attachment and germination response of Ulva pertusa spores, AF efficiency of five organic AF candidates is discussed.

Novel, non-toxic antifouling technologies are focused on the manipulation of surface topography to deter settlement of the dispersal stages of fouling organisms. This study investigated the effect of the aspect ratio (feature height/feature width) of topographical features engineered in polydimethylsiloxane, on the settlement of cyprids of Balanus amphitrite and zoospores of Ulva linza. The correlation of relative aspect ratios to antifouling efficacy was proven to be significant. An increase in aspect ratio resulted in an increase of fouling deterrence for both zoospores and cyprids. The spore density of Ulva was reduced 42% with each unit increase in aspect ratio of the Ulva-specific Sharklet AF topography. Similarly, the number of settled cyprids was reduced 45% with each unit increase in aspect ratio. The newly described barnacle-specific Sharklet AF topography (40 microm feature height, aspect ratio of 2) reduced cyprid settled by 97%. Techniques have been developed to superimpose the smaller Ulva-specific topographies onto the barnacle-specific surfaces into a hierarchical structure to repel both organisms simultaneously. The results for spore settlement on first-generation hierarchical surfaces provide insight for the efficacious design of such structures when targeting multiple settling species.

The effect of feature size, geometry, and roughness on the settlement of zoospores of the ship fouling alga Ulva was evaluated using engineered microtopographies in polydimethylsiloxane elastomer. The topographies studied were designed at a feature spacing of 2 microm and all significantly reduced spore settlement compared to a smooth surface. An indirect correlation between spore settlement and a newly described engineered roughness index (ERI) was identified. ERI is a dimensionless ratio based on Wenzel's roughness factor, depressed surface fraction, and the degree of freedom of spore movement. Uniform surfaces of either 2 mum diameter circular pillars (ERI=5.0) or 2 microm wide ridges (ERI=6.1) reduced settlement by 36% and 31%, respectively. A novel multi-feature topography consisting of 2 mum diameter circular pillars and 10 microm equilateral triangles (ERI=8.7) reduced spore settlement by 58%. The largest reduction in spore settlement, 77%, was obtained with the Sharklet AF topography (ERI=9.5).

To understand the role of surface wettability in adhesion of cells, the attachment of two different marine algae was studied on hydrophobic and hydrophilic polymer surfaces. Adhesion of cells of the diatom Navicula and sporelings (young plants) of the green macroalga Ulva to an underwater surface is mainly by interactions between the surface and the adhesive exopolymers, which the cells secrete upon settlement and during subsequent colonization and growth. Two types of block copolymers, one with poly(ethylene glycol) side-chains and the other with liquid crystalline, fluorinated side-chains, were used to prepare the hydrophilic and hydrophobic surfaces, respectively. The formation of a liquid crystalline smectic phase in the latter inhibited molecular reorganization at the surface, which is generally an issue when a highly hydrophobic surface is in contact with water. The adhesion strength was assessed by the fraction of settled cells (Navicula) or biomass (Ulva) that detached from the surface in a water flow channel with a wall shear stress of 53 Pa. The two species exhibited opposite adhesion behavior on the same sets of surfaces. While Navicula cells released more easily from hydrophilic surfaces, Ulva sporelings showed higher removal from hydrophobic surfaces. This highlights the importance of differences in cell-surface interactions in determining the strength of adhesion of cells to substrates.

Bacteria utilize quorum sensing to regulate the expression of cell density-dependant phenotypes such as biofilm formation and virulence. Zoospores of the marine alga Ulva intestinalis exploit the acyl-homoserine lactone (AHL) quorum sensing system to identify bacterial biofilms for preferential settlement. Here, we demonstrate that AHLs act as strong chemoattractants for Ulva zoospores. Chemoattraction does not involve a chemotactic orientation towards the AHL source. Instead, it occurs through a chemokinesis in which zoospore swimming speed is rapidly decreased in the presence of AHLs. The chemoresponse to AHLs was dependant on the nature of the acyl side chain, with N-(3-oxododecanoyl)-homoserine lactone (30-C12-HSL) being the most effective signal molecule. Mean zoospore swimming speed decreased more rapidly over wild-type biofilms of the marine bacteria Vibrio anguillarum relative to biofilms of the vanM mutant, in which AHL synthesis is disrupted. These data implicate a role for AHL-mediated chemokinesis in the location and preferential settlement of Ulva zoospores on marine bacterial assemblages. Exposure to AHLs did not inhibit the negative phototaxis of Ulva zoospores, indicating that chemoattraction to bacterial biofilms does not preclude the response to a light stimulus in substrate location.

Biofilms of bacteria, frequently in association with algae, protozoa and fungi, are found on all submerged structures in the marine environment. Although it is likely that for the majority of organisms a biofilmed surface is not a pre-requisite for settlement, in practice, colonization by spores and larvae of fouling organisms almost always takes place via a biofilmed surface. Therefore, the properties of the latter may be expected to influence colonization, positively or negatively. Biofilms are responsible for a range of surface-associated and diffusible signals, which may moderate the settling behaviour of cells, spores and larvae. However, there is no consensus view regarding either cause and effect or the mechanism(s) by which biofilms moderate settlement. Studies with mixed biofilms, especially field experiments, are difficult to interpret because of the conflicting signals produced by different members of the biofilm community as well as their spatial organisation. Molecular techniques highlight the deficiencies of culture methods in identifying biofilm bacteria; hence, the strains with the most impact on settlement of spores and larvae may not yet have been isolated and cultured. Furthermore, secondary products isolated from cultured organisms may not reflect the situation that pertains in nature. The evidence that bacterial quorum sensing signal molecules stimulate settlement of spores of the green macroalga, Ulva, is discussed in some detail. New molecular and analytical tools should provide the opportunity to improve our fundamental understanding of the interactions between fouling organisms and biofilms, which in turn may inform novel strategies to control biofouling.

The marine antifouling and fouling-release performance of titanium surfaces coated with a bio-inspired polymer was investigated. The polymer consisted of methoxy-terminated poly(ethylene glycol) (mPEG) conjugated to the adhesive amino acid l-3,4-dihydroxyphenylalanine (DOPA) and was chosen based on its successful resistance to protein and mammalian cell fouling. Biofouling assays for the settlement and release of the diatom Navicula perminuta and settlement, growth and release of zoospores and sporelings (young plants) of the green alga Ulva linza were carried out. Results were compared to glass, a poly(dimethylsiloxane) elastomer (Silastic T2) and uncoated Ti. The mPEG-DOPA3 modified Ti surfaces exhibited a substantial decrease in attachment of both cells of N. perminuta and zoospores of U. linza as well as the highest detachment of attached cells under flow compared to control surfaces. The superior performance of this polymer over a standard silicone fouling-release coating in diatom assays and approximately equivalent performance in zoospore assays suggests that this bio-inspired polymer may be effective in marine antifouling and fouling-release applications.

The environmental scanning electron microscope has been used to image the adhesive pads secreted by zoospores of the marine alga Ulva linza as they settle on a range of self-assembled and grafted monolayers of different wettability, under natural, hydrated conditions. Results reveal that the diameter of the adhesive pad is strongly influenced by surface wettability, the adhesive spreading more (i.e. wetting the surface better) on the more hydrophilic surfaces. This is in direct contrast to previous observations on the spreading of marine bioadhesives and is in apparent contradiction to the predictions of the Young-Dupre equation for three-phase systems. In this paper, we attempt an explanation based upon thermodynamic analysis of the wetting properties of hydrophilic proteins.

The stoichiometry and antenna sizes of the two photosystems in two marine green algae, Bryopsis maxima and Ulva pertusa, were investigated to examine whether the photosynthetic apparatus of the algae can be related to the light environment of their natural habitat. Bryopsis maxima and Ulva pertusa had chlorophyll (Chl) a/b ratios of 1.5 and 1.8, respectively, indicating large levels of Chl b, which absorbs blue-green light, relative to Chl a. The level of photosystem (PS) II was equivalent to that of PS I in Bryopsis maxima but lower than that of PS I in Ulva pertusa. Analysis of Q(A) photoreduction and P-700 photo-oxidation with green light revealed that >50% of PS II centres are non-functional in electron transport. Thus, the ratio of the functional PS II to PS I is only 0.46 in Bryopsis maxima and 0.35 in Ulva pertusa. Light-response curves of electron transport also provided evidence that PS I had a larger light-harvesting capacity than did the functional PS II. Thus, there was a large imbalance in the light absorption between the two photosystems, with PS I showing a larger total light-harvesting capacity than PS II. Furthermore, as judged from the measurements of low temperature fluorescence spectra, the light energy absorbed by Chl b was efficiently transferred to PS I in both algae. Based on the above results, it is hypothesized that marine green algae require a higher ATP:NADPH ratio than do terrestrial plants to grow and survive under a coastal environment.

Zoospores of the eukaryotic green seaweed Ulva respond to bacterial N-acylhomoserine lactone (AHL) quorum sensing signal molecules for the selection of surface sites for permanent attachment. In this study we have investigated the production and destruction of AHLs in biofilms of the AHL-producing marine bacterium, Vibrio anguillarum and their stability in seawater. While wild type V. anguillarum NB10 was a strong attractor of zoospores, inactivation of AHL production in this strain by either expressing the recombinant Bacillus lactonase coding gene aiiA, or by mutating the AHL biosynthetic genes, resulted in the abolition of zoospore attraction. In seawater, with a pH of 8.2, the degradation of AHL molecules was temperature-dependent, indicating that the AHLs produced by marine bacterial biofilms have short half-lives. The Ulva zoospores sensed a range of different AHL molecules and in particular more zoospores settled on surfaces releasing AHLs with longer (>six carbons) N-linked acyl chains. However, this finding is likely to be influenced by the differential diffusion rates of AHLs from the experimental surface matrix. Molecules with longer N-acyl chains, such as N-(3-oxodecanoyl)- L-homoserine lactone, diffused more slowly than those with shorter N-acyl chains such as N-(3-hydroxy-hexanoyl)- L-homoserine lactone. Image analysis using GFP-tagged V. anguillarum biofilms revealed that spores settle directly on bacterial cells and in particular on microcolonies which we show are sites of concentrated AHL production.

Hybrid sol-gel-derived xerogel films prepared from 45/55 (mol ratio) n-propyltrimethoxysilane (C3-TMOS)/tetramethylorthosilane (TMOS), 2/98 (mol ratio) bis[3-(trimethoxysilyl)propyl]-ethylenediamine (enTMOS)/tetraethylorthosilane (TEOS), 50/50 (mol ratio) n-octyltriethoxysilane (C8-TEOS)/TMOS, and 50/50 (mol ratio) 3,3,3-trifluoropropyltrimethoxysilane (TFP-TMOS)/TMOS were found to inhibit settlement of zoospores of the marine fouling alga Ulva (syn. Enteromorpha) relative to settlement on acid-washed glass and give greater release of settled zoospores relative to glass upon exposure to pressure from a water jet. The more hydrophobic 50/50 C8-TEOS/TMOS xerogel films had the lowest critical surface tension by comprehensive contact angle analysis and gave significantly greater release of 8-day Ulva sporeling biomass after exposure to turbulent flow generated by a flow channel than the other xerogel surfaces or glass. The 50/50 C8-TEOS/TMOS xerogel was also a fouling release surface for juveniles of the tropical barnacle Balanus amphitrite. X-ray photon electron data indicated that the alkylsilyl residues of the C3-TMOS-, C8-TEOS-, and TFP-TMOS-containing xerogels were located on the surface of the xerogel films (in a vacuum), which contributes to the film hydrophobicity. Similarly, the amine-containing silyl residues of the enTMOS/TEOS films were located at the surface of the xerogel films, which contributes to the more hydrophilic character and increased critical surface tension of these films.

The effect of modulus and film thickness on the release of adhered spores and sporelings (young plants) of the green fouling alga Ulva (syn. Enteromorpha) was investigated. PDMS elastomers of constant thickness (100 microm) but different elastic moduli were prepared by varying cross-link density with functional silicone oligomers with degrees of polymerization ranging from 18-830. This provided a 50-fold range of modulus values between 0.2 and 9.4 MPa. Three PDMS coatings of different thicknesses were tested at constant elastic modulus (0.8 MPa). The data revealed no significant increase in percentage spore removal except at the lowest modulus of 0.2 MPa although sporelings released more readily at all but the highest modulus. The influence of coating thickness was also greater for the release of sporelings compared to spores. The release data are discussed in the light of fracture mechanics models that have been applied to hard fouling. New concepts appertaining to the release of soft fouling organisms are proposed, which take into account the deformation in the adhesive base of the adherand and deformation of the PDMS film.

Two series of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold were used to systematically examine the effects of varying substratum surface chemistry and energy on the attachment of two model organisms of interest to the study of marine biofouling, the bacterium Cobetia marina (formerly Halomonas marina) and zoospores of the alga Ulva linza (formerly Enteromorpha linza). SAMs were formed on gold-coated glass slides from solutions containing mixtures of methyl- and carboxylic acid-terminated alkanethiols and mixtures of methyl- and hydroxyl-terminated alkanethiols. C. marina attached in increasing numbers to SAMs with decreasing advancing water contact angles (theta(AW)), in accordance with equation-of-state models of colloidal attachment. Previous studies of Ulva zoospore attachment to a series of mixed methyl- and hydroxyl-terminated SAMs showed a similar correlation between substratum theta(AW) and zoospore attachment. When the hydrophilic component of the SAMs was changed to carboxylate, however, the profile of attachment of Ulva was significantly different, suggesting that a more complex model of interfacial energetics is required.

The settlement and release of Ulva spores from chemically modified, micro-engineered surface topographies have been investigated using poly(dimethyl siloxane) elastomers (PDMSe) with varying additions of non-network forming poly(dimethyl siloxane) based oils. The topographic features were based on 5 microns wide pillars or ridges separated by 5, 10, or 20 microns wide channels. Pattern depths were 5 or 1.5 microns. Swimming spores showed no marked difference in settlement on smooth surfaces covered with excess PDMS oils. However, incorporation of oils significantly reduced settlement density on many of the surfaces with topographic features, in particular, the 5 microns wide and deep channels. Previous results, confirmed here, demonstrate preferences by the spores to settle in channels and against pillars with spatial dimensions of 5 microns, 10 microns and 20 microns. The combination of lubricity and pillars significantly reduced the number of attached spores compared to the control, smooth, unmodified PDMSe surfaces when exposed to turbulent flow in a flow channel. The results are discussed in relation to the energy needs for spores to adhere to various surface features and the concepts of ultrahydrophobic surfaces. A factorial, multi-level experimental design was analyzed and a 2nd order polynomial model was regressed for statistically significant effects and interactions to determine the magnitude and direction of influence on the spore density measurements between factor levels.

Toxic antifouling chemicals released into the seawaters leads to marine environmental degradation. In order to identify a nontoxic antifoulant, an assessment of antifouling (AF) efficacy of some AF candidates was made at Ayagin harbor, east coast of South Korea. In this static panel study conducted during October 2000-March 2001, some commercial antifoulants, seaweed and seagrass extracts were screened. On panel surfaces coated with a seaweed extract, Ishige okamurae exhibited effective AF activity. Ulva pertusa was encountered as a 'monospecific' fouler with fairly high fouling coverage on many of the test panel surfaces. In recent years the increased influx of inorganic pollutants in the coastal waters causes exorbitant growth of fouling marine algae found all along the Korean peninsula. Especially, a cosmopolitan ship fouling alga U. pertusa occur with high abundance. It was largely suggested that the proposed international ban on the toxic antifoulant tributyltin (TBT) had significant effect on the 'green tide' phenomenon occurring in different parts of the world. However, it appears that Korean scenario of 'green tide' is a localized. Antifouling efficacy of some AF coatings and fouling coverage of a green tide alga, U. pertusa are discussed.

The effect of different wavebands of artificial UV (UVB and UVA) and photosynthetically active radiation (PAR) was assessed in two species of the genus Ulva, U. olivascens and U. rotundata, from southern Spain in order to test for possible differences in acclimation of photosynthesis. Both species share similar morphology but are subject to different light environments: U. rotundata is an estuarine alga, inhabiting subtidal locations, while U. olivascens is an intertidal, sun-adapted organism. Algae were exposed to three different UV conditions, PAR+UVA+UVB, PAR+UVA and PAR for 7 d. Short-term exposure (6 h) was also carried out, using two PAR levels, 150 and 700 micromolm(-2)s(-1). Pigment contents and photosynthesis vs. irradiance curves from oxygen evolution were used to contrast sun- and shade adaptation between these species. O2-based net photosynthesis (Pmax) and PAM-chlorophyll fluorescence (optimal quantum yield, Fv/Fm) were used as parameters to evaluate photoinhibition of photosynthesis in the experiments. The results underline different photobiological characteristics among species: the subtidal U. rotundata had higher contents of pigments (Chl a, Chl b and carotenoids) than the sun-adapted U. olivascens, which resulted in higher thallus absorptance and P-I parameters characterized by higher photosynthetic efficiency at limiting irradiances (alpha) and lower saturating points for photosynthesis (Ek). After 7 d exposure, photoinhibition of Fv/Fm was close to 40-45% in both species. Differences between UV treatments were seen in U. rotundata after 5 d and after 7 d in U. olivascens, in which PAR+UVA impaired strongly photosynthesis (80%). Such patterns were correlated with a progressive decrease in pigment contents, specially chlorophylls. In short-term (6 h) exposures, combinations of UVA+UVB and high PAR level resulted in high rates of photoinhibition of chlorophyll fluorescence (68-92%) in U. rotundata, whereas in U. olivascens photoinhibition ranged between 42% and 53%. Photoinhibition under low PAR combined to UV radiation was lower than observed under high PAR. Net O2-Pmax revealed similar response among the species, with maximal photoinhibition rates close to 60% in algae incubated under high PAR+UVA+UVB. In the case of UV exposure in combination with low PAR, the highest photoinhibition rates were measured in U. rotundata.

Transplantation of artificial panels between a polluted and an unpolluted site was used to evaluate eutrophication effects on the development of fouling communities in Ilha Grande Bay, SE Brazil. Organic pollution changed the relative dominance of species in the fouling communities of transplanted panels, although, their richness, evenness, and specific composition did not change. The chlorophyte Ulva sp. occurred only in the polluted site and in panels transplanted to it, whereas the bryozoan Aetea lingulata was found only in the unpolluted site and in panels transplanted to this site. These species are therefore good pollution indicators. The best pollution indicators, however, were amphipods and Spionidae polychaetes which formed mucous tubes. These groups had significantly higher values of percent cover (p<0.0001) in the polluted site and in panels transferred to it. The dominance shift is the first evidence that more meaningful changes can occur in the structure of fouling communities on a long-term scale.

Problems with tin and copper antifouling compounds have highlighted the need to develop new environmentally friendly antifouling coatings. Bacteria isolated from living surfaces in the marine environment are a promising source of natural antifouling compounds. Four isolates were used to produce extracts that were formulated into ten water-based paints. All but one of the paints showed activity against a test panel of fouling bacteria. Five of the paints were further tested for their ability to inhibit the settlement of barnacle larvae, Balanus amphitrite, and algal spores of Ulva lactuca, and for their ability to inhibit the growth of U. lactuca. Two paints caused a significant decrease in the number of settled barnacles. One paint containing extract of Pseudomonas sp. strain NUDMB50-11, showed excellent activity in all assays. The antifouling chemicals responsible for the activity of the extract were isolated, using bioassay guided fractionation, and their chemical structures determined.