Search

Traditional surgical planning (TSP) and virtual surgical planning (VSP) have been used in bimaxillary osteotomy planning. The time is taken in the planning time and operating stages, and the working/doctor/total time of either approach are useful determinants of the efficiency of the operating method and quality of care. This systematic review and meta-analysis examined if VSP has a comparative advantage over TSP in the bimaxillary osteotomy. Cochrane Library, PubMed, EMBASE, and Google Scholar were used as databases to collect studies that met the outlined inclusion criteria based on PRISMA. Eight of 759 studies were considered to meet the eligibility criteria, and six fit for meta-analysis. The findings demonstrated significant VSP advantage over TSP in planning time (Z = 3.97 (P < 0.00001), WMD = −5.29 (CI −7.90 to −2.68)). While more time-efficient than TSP, the difference with VSP was not significant during surgery (Z = 0.44 (P = 0.66), WMD = −0.10 (CI −0.51 to 0.34)). The study used random effects due to the high I2 of the planning mean differences. The continued evolution of VSP and improved application knowledge will be important in reducing the time of planning and surgery, thus improving the outcomes of the complex bimaxillary osteotomy. The current evidence shows that VSP significantly performs better than TSP in reducing the bimaxillary osteotomy planning time, but the timing difference is not significant during surgery. Future analysis will benefit from using studies with standard research and reporting metrics and procedures, thus improving evidence-based clinical practice.

The objective of this study was to evaluate the safety and feasibility of (99m)Tc-based prostate-specific membrane antigen (PSMA) robot-assisted–radioguided surgery to aid or improve the intraoperative detection of lymph node metastases during primary robot-assisted radical prostatectomy (RARP) for prostate cancer (PCa). Methods: Men with primary high-risk PCa (≥ cT3a, International Society of Urological Pathology (ISUP) grade group ≥ 3 or prostate-specific antigen of ≥ 15 ng/mL) with potential lymph node metastasis (Briganti nomogram risk > 10% or on preoperative imaging) were enrolled in the study. Patients underwent staging (68)Ga-PSMA PET/CT scanning. Preoperatively, a (99m)Tc-labeled PSMA ligand ((99m)Tc PSMA I&S; 500 MBq) was administered followed by SPECT/CT. A RARP including extended pelvic lymph node dissection was performed, with intraoperative tracing of PSMA-avid tissues using a prototype DROP-IN γ-probe. Resected specimens were also measured ex vivo. Histopathologic concordance with probe findings was evaluated. A radiotracer count of ≥ 1.5 times the background reference (in vivo), and ≥ 10 (absolute count) in the ex vivo setting, was considered positive. Results: Twelve patients were included (median age, 68 y, and prostate-specific antigen, 9.15 ng/mL). Most of the patients harbored ISUP 5 PCa (75%) and had avid lymph nodes on preoperative PSMA PET (64%). The DROP-IN probe aided resection of PSMA-avid (out-of-template) lymph nodes and residual disease at the prostate bed. Eleven metastatic lymph nodes were identified by the probe that were not observed on preoperative (68)Ga-PSMA PET/CT. Of the 74 extraprostatic tissue specimens that were resected, 22 (29.7%) contained PCa. The sensitivity, specificity, positive predictive value, and negative predictive value of inpatient use of the γ-probe were 76% (95% CI, 53%–92%), 69% (95% CI, 55%–81%), 50%, and 88%, respectively. Ex vivo, the diagnostic accuracy was superior: 76% (95% CI, 53%–92%), 96% (95% CI, 87%–99%), 89%, and 91%, respectively, for sensitivity, specificity, positive predictive value, and negative predictive value. Of the missed lymph nodes in vivo (n = 5) and ex vivo (n = 5), 90% were micrometastasis (≤3 mm). No complications greater than Clavien–Dindo Grade I occurred. Conclusion: Robot-assisted (99m)Tc-based PSMA-radioguided surgery is feasible and safe in the primary setting, optimizing the detection of nodal metastases at the time of RARP and extended pelvic lymph node dissection. Further improvement of the detector technology may optimize the capabilities of robot-assisted (99m)Tc-based PSMA-radioguided surgery.

To aid surgeons in more complete and safe resection of brain tumors, adjuvant technologies have been developed to improve visualization of target tissue. Fluorescence-guided surgery relies on the use of fluorophores and specific light wavelengths to better delineate tumor tissue, inflammation, and areas of blood–brain barrier breakdown. 5-aminolevulinic acid (5-ALA), the first fluorophore developed specifically for brain tumors, accumulates within tumor cells, improving visualization of tumors both at the core, and infiltrative margin. Here, we describe the background of how 5-ALA integrated into the modern neurosurgery practice, clinical evidence for the current use of 5-ALA, and future directions for its role in neurosurgical oncology. Maximal safe resection remains the standard of care for most brain tumors. Gross total resection of high-grade gliomas (HGGs) is associated with greater overall survival and progression-free survival (PFS) in comparison to subtotal resection or adjuvant treatment therapies alone.1–3 A major challenge neurosurgeons encounter when resecting infiltrative gliomas is identification of the glioma tumor margin to perform a radical resection while avoiding and preserving eloquent regions of the brain. 5-aminolevulinic acid (5-ALA) remains the only optical-imaging agent approved by the FDA for use in glioma surgery and identification of tumor tissue.4 A multicenter randomized, controlled trial revealed that 5-ALA fluorescence-guided surgery (FGS) almost doubled the extent of tumor resection and also improved 6-month PFS.5 In this review, we will highlight the current evidence for use of 5-ALA FGS in brain tumor surgery, as well as discuss the future directions for its use.

Fluorescence-guided surgery has emerged as a promising imaging technique for real-time intraoperative tumour delineation and visualisation of submillimetre tumour masses in cytoreductive surgery for epithelial ovarian cancer (EOC). Researchers have developed several EOC-targeted fluorescent probes, most of which are currently in the preclinical stage. Interestingly, imaging devices designed for open surgery are proof of concept. This review summarises the recent advances in EOC-targeted fluorescent probes and open-field fluorescence imaging strategies and discusses the challenges and potential solutions for clinical translation.

Zygomaticomaxillary complex fractures involve four fracture ends. It is difficult to fully expose the operative area through a main coronal incision, an intraoral incision, and an eyelid incision. To address the partial visual field loss in craniofacial fracture reduction, we attempted to use an augmented reality (AR) navigation system.Patients with zygomaticomaxillary complex fractures underwent three-dimensional (3D) computed tomography (CT) modeling before surgery, and preoperative plans were designed. The control team used traditional optical navigation to perform the surgery. The experimental team used an AR navigation system. From May 2019 to December 2019, 10 patients with zygomaticomaxillary complex fractures were included in this study. Data were collected after surgery and analyzed.There was a significant difference between the two groups in the fracture point error (1.35 vs. 1.61, P = 0.02) and fracture reduction time (15.40 vs. 20.40, P = 0.03). However, there was no difference in the operative duration (6.60 vs. 6.65, P = 0.92), blood loss volume (620.00 vs. 580.00, P = 0.83), or incidence of complications.The AR navigation system used by the research team has good auxiliary effects for reducing zygomaticomaxillary complex fractures. The new surgical method has better accuracy and a shorter reduction time than the traditional surgical method.

Pedicle screw (PS) placement in thoracic scoliotic deformities can be challenging due to altered vertebral anatomy; malposition can result in severe functional disability or inferior construct stability. Three-dimensional (3D) printed patient-specific guides (PSGs) have been recently used to supplement other PS placement techniques. We conducted a single-center, retrospective observational study to assess the accuracy of PS placement using PSGs in a consecutive case series of pediatric and adult patients with thoracic scoliosis.We analyzed the data of patients with thoracic scoliosis who underwent PS placement using 3D-printed PSG as a vertebral cannulation aid between June 2013 and July 2018. PS positions were determined via Gertzbein-Robbins (GR) and Heary classifications on computed tomography images. We determined the concordance of actual and preoperatively planned PS positions and defined the technique learning curve using a receiver-operating characteristic (ROC) curve.We performed 362 thoracic PS placement procedures in 39 consecutive patients. We classified 352 (97.2%), 2 (0.6%), and 8 (2.2%) screws as GR grades 0 (optimal placement), I, and II, respectively. The average instrumented PS entry point offsets on the X- and Y-axes were both 0.8 mm, and the average differences in trajectory between the planned and the actual screw placements on the oblique sagittal and oblique transverse planes were 2.0° and 2.4°, respectively. The learning process was ongoing until the first 12 PSs were placed.The accuracy of PS placement using patient-specific 3D templates in our case series exceeds the accuracies of established thoracic PS placement techniques.

Laparoscopic liver resection is a challenging procedure because of the difficulty to localise inner structures such as tumours and vessels. Augmented reality overcomes this problem by overlaying preoperative 3D models on the laparoscopic views. It requires deformable registration of the preoperative 3D models to the laparoscopic views, which is a challenging task due to the liver flexibility and partial visibility.We propose several multi-view registration methods exploiting information from multiple views simultaneously in order to improve registration accuracy. They are designed to work on two scenarios: on rigidly related views and on non-rigidly related views. These methods exploit the liver's anatomical landmarks and texture information available in all the views to constrain registration.We evaluated the registration accuracy of our methods quantitatively on synthetic and phantom data, and qualitatively on patient data. We measured 3D target registration errors in mm for the whole liver for the quantitative case, and 2D reprojection errors in pixels for the qualitative case.The proposed rigidly related multi-view methods improve registration accuracy compared to the baseline single-view method. They comply with the 1 cm oncologic resection margin advised for hepatocellular carcinoma interventions, depending on the available registration constraints. The non-rigidly related multi-view method does not provide a noticeable improvement. This means that using multiple views with the rigidity assumption achieves the best overall registration error.

We aimed to produce a narrative review of planning orthognathic surgery, chronologically. Also, to present flaws of methods and the future of orthognathic surgery planning. The search was carried out mainly in PubMed, SCOPUS, Embase, and Cochrane databases. Also was complemented by manual search in reference lists from identified studies and in grey literature. The first orthognathic surgery was reported in 1849, and it took more than a century for the development of the traditional orthognathic 2D planning. Besides the advances, surgeons observed failures and lacks on 2D method in representing with reliability the facial and maxillary tridimensional structure (3D). With technological developments in 90s and 2000s, methodological improvements were granted, and the 3D protocol was created. The CASS and Charlotte protocols were the earliest 3D planning protocols conceived. Since then, some steps were simplified, and new technologies are being developed and added to create a more reliable and precise way of planning orthognathic surgery.

Statement of problem The accuracy of single implant placement is critical, as errors may cause problems with vital structures intraoperatively, as well as postoperatively with the prostheses. These issues may be exacerbated in complete-arch edentulous treatments requiring relative accuracy among multiple implants, particularly with prefabricated prosthetic structures. Purpose The purpose of this clinical study was to determine the accuracy of dental implant placement by using haptic robotic guidance in completely edentulous participants. Material and methods In a prospective single-arm clinical study, 5 qualified participants elected to receive dental implants placed by using haptic robotic guidance to restore either the maxillary or mandibular arch, or both, with complete-arch implant-supported prostheses. Three dual-arch participants and 2 single-arch participants resulted in 38 endosteal dental implants being placed. A virtual preoperative restorative and surgical plan was created before surgery. This plan was matched to the surgical workspace on the day of surgery by using a bone-mounted fiducial splint fabricated from a cone beam computed tomography (CBCT) scan. Intraoperatively, the surgeons maneuvered a handpiece attached to the robotic guidance arm, osteotomies were created with a haptically constrained handpiece, and the implants were placed with 3-dimensional haptic constraints as per the virtual plan. Postoperative CBCT scans allowed the evaluation of the deviations of the actual implant placement relative to the plan. Results Twenty-three implants were placed in the mandible and 15 in the maxilla. The mean ±standard deviation global angular deviation was 2.56 ±1.48 degrees, while the crown of the placed implant showed a deviation from the plan of 1.04 ±0.70 mm and the apex of 0.95 ±0.73 mm. The signed depth deviation was 0.42 ±0.46 mm proud. No adverse events were reported. Conclusions This clinical series for treating completely edentulous patients by using haptic robotic guidance was found to be safe and accurate. While further longer-term clinical studies are necessary to measure outcomes and to assess differences as compared with nonrobotic implementations, haptic robotic preparation appears to confer additional intraoperative advantages over other techniques for treating completely edentulous arches.

Mastoidectomy involves drilling the temporal bone while avoiding the facial nerve, semicircular canals, sigmoid sinus, and tegmen. Optical topographic imaging (OTI) is a novel registration technique that allows rapid registration with minimal navigational error. To date, no studies have examined the use of OTI in skull-base procedures.In this cadaveric study, 8 mastoidectomies were performed in 2 groups-4 free-hand (FH) and 4 OTI-assisted mastoidectomies. Registration accuracy for OTI navigation was quantified with root mean square (RMS) and target registration error (TRE). Procedural time, percent of mastoid resected, and the proximity of the mastoidectomy cavity to critical structures were determined.The average RMS and TRE associated with OTI-based registration were 1.44 mm (±0.83 mm) and 2.17 mm (±0.89 mm), respectively. The volume removed, expressed as a percentage of the total mastoid volume, was 37.5% (±10.2%) versus 31.2% (±2.3%), P = 0.31, for FH and OTI-assisted mastoidectomy. There were no statistically significant differences between FH and OTI-assisted mastoidectomies with respect to proximity to critical structures or procedural time.This work is the first examining the application of OTI neuronavigation in lateral skull-base procedures. This pilot study revealed the RMS and TRE for OTI-based navigation in the lateral skull base are 1.44 mm (±0.83 mm) and 2.17 mm (±0.89 mm), respectively. This pilot study demonstrates that an OTI-based system is sufficiently accurate and may address barriers to widespread adoption of navigation for lateral skull-base procedures.

The surgery-first concept is becoming increasingly popular in orthognathic surgery since it offers major advantages such as a reduction of treatment duration and an increase in patient satisfaction by eliminating phases of presurgical orthodontic decompensation. Here, we present a novel interdisciplinary pathway of a fully virtual orthodontic-surgical planning concept in a surgery-first setting using a 3D-printed cutting guide and a customised maxillary implant for the Le Fort I osteotomy as well as a CAD/CAM-based stereolithographic final splint. Patient data from cone-beam computed tomography of the skull and a full arch dental scan were processed using the OnyxCeph

Dye design can influence the ability of fluorescently labeled imaging agents to generate tumor contrast and has become an area of significant interest in the field of fluorescence-guided surgery (FGS). Here, we show that the charge-balanced near-infrared fluorescent (NIRF) dye FNIR-Tag enhances the imaging properties of a fluorescently labeled somatostatin analogue.

Percutaneous cannulation of foramen ovale (FO) for treatment of trigeminal neuralgia, classically performed according to empirical landmarks and under fluoroscopic guide, may be difficult, time-consuming, and burdened with vascular or neurological complications related to close anatomic relationships.To investigate cannulation of FO for treatment of trigeminal neuralgia assisted by O-Arm O2-based navigation, to assess safety and accuracy.Nineteen patients underwent percutaneous balloon compression of Gasserian ganglion assisted by navigation provided by O-Arm O2 and StealthStation. Clinical outcomes according to Barrow Neurological Institute Pain Score, time of recurrence, side effects, and complications, as well as technical aspects as time of the procedure and number of tracks were investigated and evaluated. Obtained data were compared with current literature in a systematic review.The median time for procedure was 46 minutes; cannulation of the FO was performed in a median of 3 minutes and 47 seconds, in a single track in 16 patients, while 3 cases required a further O-Arm acquisition to check the needle position. No complications were observed. Onset of facial hypoesthesia was recorded in 10 patients and dysesthesia in 5. Although at a median follow-up of 12.7 months 7 patients had recurrence after an average pain-free period of 7.3 months, all but 2 patients had improvement in pain score.Advantages powered by navigation should be addressed in accuracy, lower complication rate, and success of cannulation even in case of previous treatments or anatomic variations, rather than in effective reduction of surgical time.

Pedicle screws placement is very common procedure in spinal surgery. Robotic assisted surgery has been widely used in this operation. We assessed the accuracy of thoracolumbar spine trans-pedicle screws (TPS) implantation utilizing a noval robotic navigation system (i-Navi robotic navigation system) by planning with two-dimensional (2-D) C-arm.This study was approved by the Institutional Review Board of the Cathay General Hospital on June 21, 2018 (IRB number: CGH-P 106,092), and written informed consents were obtained from all the patients. There are 18 patients were enrolled in the study. All the patients received the posterior fusion with TPS insertion under the assistant of our robotic navigation system.There are 18 patients were included into our study, there are 2 patients were quitted from the study due to the equipment setup was not complete. Other 16 patients completed the entire procedure successfully. There is total 88 pedicle screws were inserted through i-Navi robotic navigation system. There are 79 of 88 screws were graded A, and 9 screws were graded B; no screws were graded C or D. No vascular or nerve injuries were noted after the operations.We present our i-Navi robotic navigation system, by planning with 2-D C-arm imaging and pre-operative CT scans. According to the results of study, we think it can provide a reliable and easy tool to perform the TPS in thoracic lumbar spine surgery.

Systematic Review.To elucidate treatment modalities and outcomes of patients with traumatic cervical spondyloptosis (TCS).Traumatic cervical spondyloptosis (TCS) is rare and typically leads to devastating neurological injury. Management strategies vary from case to case.A systematic review of the literature identified cases of adult TCS, and data was analyzed to characterize the patient population and to assess factors that influenced clinical outcome. In addition, an illustrative case is presented in which closed reduction of a severe C7-T1 spondyloptosis injury was guided with the use of cone beam computerized tomography (O-Arm) to overcome difficulties with visualizing the cervicothoracic junction region.In addition to our case, we identified 52 cases of adult TCS from 34 articles. Patient age ranged from 18 to 73 (average 45.6) with male a predominance (n = 37, 71.2%). Neurological function on presentation was most commonly ASIA E (34.6%), followed by ASIA D (21.2%) and ASIA A (19.2%). The most frequently affected levels were C7-T1 (44.2%) followed by C6-7 (33.0%). Closed reduction was attempted in 42 (80.8%) patients. A total of 49 (94.2%) patients underwent surgical treatment, with 31 (63.3%) undergoing single-approach procedures. The presence of neurological injury, cervical level of injury, and age were not significant predictors of successful closed reduction. Similarly, successful closed reduction, age, cervical level of injury, and neurological injury were not predictors of a single-approach treatment.TCS is rare and most frequently appears at or near the cervicothoracic junction and in males. The presentation is typically that of severe neurological injury, but partial neurological recovery occurs in many patients. No predictors of successful closed reduction or single approach surgery are identified. We postulate that the use of intraoperative multiplanar imaging technology like the O-Arm may enhance the ability to achieve a successful closed reduction given the predilection for the injury to occur at the cervicothoracic junction. Prospective study of the durability of constructs by single or combined approaches is warranted.

Navigation-assisted surgery is the gold standard for complex reconstructive procedures of the midface and facial skeleton, and artificial and anatomical landmarks are often used for reference. The correct identification of these landmarks before surgery is crucial for the accuracy of the navigation system. This study aimed to investigate the human errors in reference point placement. This retrospective study investigated 228 reference-point positions in 51 cases where navigation was utilized. The discrepancies between the actual reference point-position and manually planned preoperative reference points were quantified using Brainlab iPlanCMF 3.0.6. The referencing methods used in these cases included dental registration splints, osteosynthesis materials, anatomical landmarks, and combinations of these methods. The average discrepancy in the actual and manually planned reference points was 0.29 ± 0.41 mm. The use of anatomical landmarks demonstrated a significantly lower deviation (p 0.05), although the differences between the errors in reference-point placement using dental registration splints, osteosynthesis materials, or combinations of these methods were not statistically significant. The frequency of misplacement of reference points was significantly higher than expected. These errors might have been caused by human bias during manual placement of the points or intraoperative difficulties caused by extensive metal artifacts. Thus, we postulate that the surgical personnel involved in planning navigation-assisted surgery should undergo intensive training. The development of new referencing methods that are less susceptible to these causes of error might help overcome human bias.

Accurate reduction is of vital importance in the treatment of zygomaticomaxillary complex (ZMC) fractures. Computer-assisted navigation systems (CANS) have been employed in ZMC fractures to improve the accuracy of surgical reduction. However, randomized controlled trials on this subject are rare and the benefits of CANS remain controversial. The aim of this study was to compare reduction errors between navigation-aided and conventional surgical treatment for ZMC fractures. Thirty-eight patients with unilateral type B ZMC fractures were enrolled. Preoperative computed tomography data were imported into ProPlan software for virtual surgical planning. Open reduction and internal fixation was performed with CANS (experimental group) or without CANS (control group). Postoperative computed tomography scans were obtained to examine the difference between surgical planning and the actual postoperative outcome, namely reduction errors. The median translational reduction errors in the X, Y, and Z axes were 0.80 mm, 0.40 mm, and 0.80 mm, respectively, in the experimental group and 0.53 mm, 0.86 mm, and 0.83 mm, respectively, in the control group (P0.05). The median rotational reduction errors in pitch, roll, and yaw were 0.92°, 2.47°, and 1.54°, respectively, in the experimental group and 1.45°, 3.68°, and 0.76°, respectively, in the control group (P0.05). In conclusion, compared with conventional reduction surgery, navigation-aided surgery showed no significant improvement in reduction accuracy in the treatment of type B ZMC fractures (Chinese Clinical Trial Registry, registration number ChiCTR1800015559).

A new technique of guided implant surgery is presented. A conventional complete denture is converted into both tomographic and surgical guides and later into an interim implant-supported fixed prosthesis. A plate derived from a computed tomography scan becomes the physical link between the virtual planning and tube positioning device. Furthermore, the interim placement of mini-implants adjacent to the symphysis region stabilizes the guide throughout the guided surgery. This technique reduces treatment time and costs.

The free fibula flap is a reliable approach used to reconstruct maxillofacial osseous defects. Virtual surgical planning facilitates the execution of such segmental bony reconstruction, usually preceding the placement of endosseous implants for dental rehabilitation. Novel advances in digital technology allow for fabrication of 3D guides for implant placement in the fibula bone segments before their fixation to the facial defect, with reduced ischemic time, reduced treatment time, faster dental rehabilitations, and unprecedented improvements in the overall treatment efficiency. This case report illustrates the use of digitally designed 3D-printed surgical plates for a single-stage surgery of free fibula flap with implant placement. The patient was successfully treated and followed over 2 years. Comparison between preoperative virtual planning and postoperative scans revealed a high accuracy of implant and bone segment positioning.

Modern clinical protocols in implantology aim to reduce the duration and discomfort of the surgical phase while preserving excellent treatment results. The purpose of this study is to evaluate the clinical differences between impression stone pouring and impression digital pouring required for surgical guide fabrication in fully guided dental implant surgery. This study was conducted for partially edentulous patients with straightforward cases who did not require bone or soft tissue augmentation. Forty dental implants were installed in 14 patients (age range: 25-70 y) at the Dental Implant Unit, Oral and Maxillofacial Surgery Center, Gazi Alhariri Teaching Hospital, Medical City, Baghdad. The dental implants were guided into the most prosthetically suitable position using a surgical guide. Twenty of them were guided by conventional impression stone pouring to create the surgical guide, whereas the other 20 implants were installed using digital pouring for the dental impression to fabricate the surgical guide. The mean for impression stone pouring in regard to angular deviation of 4.33±3.435 degree, the depth difference was 1.29±0.90 mm and entry point deviation 0.99±0.84 mm. In contrast, the mean for digital pouring in regard to angular deviation of 3.34±2.10 degree, depth difference was 0.89±0.67 mm and entry point deviation was 0.83±0.61 mm. This study revealed that there was no significant difference between the 2 groups regarding all 3 variables at a P-value of 0.05. Neither biological nor mechanical complications occurred.

Purpose We assessed the accuracy of a new 3D2D registration algorithm to be used for navigated spine surgery and explored anatomical and radiologic parameters affecting the registration accuracy. Compared to existing 3D2D registration algorithms, the algorithm does not need bone-mounted or table-mounted instruments for registration. Neither does the intraoperative imaging device have to be tracked or calibrated. Methods The rigid registration algorithm required imaging data (a pre-existing CT scan (3D) and two angulated fluoroscopic images (2D)) to register positions of vertebrae in 3D and is based on non-invasive skin markers. The algorithm registered five adjacent vertebrae and was tested in the thoracic and lumbar spine from three human cadaveric specimens. The registration accuracy was calculated for each registered vertebra and measured with the target registration error (TRE) in millimeters. We used multivariable analysis to identify parameters independently affecting the algorithm’s accuracy such as the angulation between the two fluoroscopic images (between 40° and 90°), the detector-skin distance, the number of skin markers applied, and waist circumference. Results The algorithm registered 780 vertebrae with a median TRE of 0.51 mm [interquartile range 0.32–0.73 mm] and a maximum TRE of 2.06 mm. The TRE was most affected by the angulation between the two fluoroscopic images obtained (p p = 0.004) and in the specimen with the smallest waist circumference (p = 0.003). The algorithm registered all five adjacent vertebrae with similar accuracy. Conclusion We studied the accuracy of a new 3D2D registration algorithm based on non-invasive skin markers. The algorithm registered five adjacent vertebrae with similar accuracy in the thoracic and lumbar spine and showed a maximum target registration error of approximately 2 mm. To further evaluate its potential for navigated spine surgery, the algorithm may now be integrated into a complete navigation system.

BACKGROUND: Never Events (NE) are serious clinical incidents that are wholly preventable if appropriate institutional safeguards are in place and followed. They are often used as a surrogate of the quality of healthcare delivered by an institution. Most NEs are surgical and orthopaedic surgery is one of the most involved specialties. OBJECTIVE: The aim of this study was to identify common NE themes associated with orthopaedics within the National Health Service (NHS) of England. METHOD: We conducted an observational study analysing the annual NE data published by the NHS England from 2012 to 2020 to collate all orthopaedic surgery-related NE and construct relevant recurring themes. RESULTS: We identified 460 orthopaedic NE out of a total of 3247 (14.16%) reported NE to NHS England. There were 206 Wrong implants/prostheses under 8 different themes. Wrong hip and knee prosthesis were the commonest “wrong implants” (n = 94; 45.63% and n = 91; 44.17% respectively). There were 197 “wrong-site surgery” incidents in 22 different themes. The commonest of these was the laterality problems accounting for 64 (32.48%) incidents followed by 63 (31.97%) incidents of wrong spinal level interventions. There were 18 (9.13%) incidents of intervention on the wrong patients and 17 (8.62%) wrong incisions. Retained pieces of instruments were the commonest retained foreign body with 15 (26.13%) incidents. The next categories were retained drill parts and retained instruments with 13 (22.80%) incidents each. CONCLUSION: We identified 47 different themes of NE specific to orthopaedic surgery. Awareness of these themes would help in their prevention. Site marking can be challenging in the presence of cast and on operating on the digits and spine. Addition of a real-time intra-operative implant scan to the National Joint Registry can avoid wrong implant selection while fiducial markers, intraoperative imaging, O-arm navigation, and second time-out could help prevent wrong level spinal surgery.

We review the literature regarding the use of dyes and fluorescence-guided visualization techniques in gynaecological surgery. We also discuss advances in imaging that may enhance surgery by incorporating real-time visual feedback through augmented reality and preoperative planning with patient-specific, three-dimensional printed surgical fields.Methylene blue is one of the most commonly used dyes, while indocyanine green is the most used agent in fluorescence-guided surgery. Augmented reality and three-dimensional printing are also being increasingly used in gynaecology.Dyes and fluorescence-based surgeries are commonly utilized to improve anatomic identification, preservation of healthy tissue and excision of disease. In addition, we explore how augmented reality and three-dimensional printing are used in gynaecology.

Patient-specific instrumentation (PSI) was developed to produce more accurate alignment of components and consequently improve clinical outcomes when used in total knee arthroplasty. We compare radiological accuracy and clinical outcomes at a minimum of 5-year follow-up between patients randomized to undergo total knee arthroplasty performed using PSI or traditional cutting block techniques.This multicenter, randomized control trial included patients blinded to the technique 1used. Outcome measures were coronal alignment measured radiologically, Euroqol-5D, Oxford knee score, and International Knee Society Score measured at 1- and 5-year follow-up.At a minimum 5-year follow-up, there were 38 knees in the PSI group and 39 in the conventional instrumentation group for analysis. Baseline demographics and clinical outcome scores were matched between groups. Overall, there was no significant difference in the coronal femoral angle (P = .59), coronal tibial angle (P = .37), tibiofemoral angle (P = .99), sagittal femoral angle (P = .34), or the posterior tibia slope (P = .12) between knees implanted using PSI and those implanted with traditional cutting blocks. On the measurement of coronal alignment, intraobserver reliability tests demonstrated substantial agreement (k = 0.64). Clinical outcomes at both 1-year and 5-year follow-up demonstrated statistically significant and clinically relevant improvement in scores from baseline in both groups, but no difference could be detected between the Euroqol-5D (P = .78), Oxford knee score (P = .24), or International Knee Society Score (P = .86) between the 2 groups.This study has shown no additional benefit to PSI in terms of improved alignment or functional outcomes at minimum 5-year follow-up over traditional techniques.

This pilot study was undertaken to evaluate the safety, performance, and usability of the Xvision-Spine (XVS) System (Augmedics, Arlington Heights, IL) during open spinal fixation procedures in patients requiring pedicle screw placement in the lumbosacral spine.The XVS System is an augmented reality head-mounted display (HMD) based on a computer navigation system designed to assist surgeons in accurately placing pedicle screws. It uses an HMD-mounted tracking camera to provide optical tracking technology, and provides the surgeon a translucent direct near-eye display of the navigated surgical instrument's location relative to the computed tomographic image. We report the preliminary results of a prospective series of all consecutive patients who underwent augmented reality-assisted pedicle screw placement in the lumbosacral vertebrae at 3 institutions. Clinical accuracy for each pedicle screw was graded with Gertzbein-Robbins scores by 2 independent and blinded neuroradiologists.The 19 study participants included 8 men and 11 women with a mean age of 59.13 ± 12.09 and 59.91 ± 12.89 years, respectively. Seventeen procedures were successfully completed via the XVS System. Two procedures were not completed due to technical issues with the system's intraoperative scanner. A total of 86 screws were inserted. The accuracy of the XVS System was 97.7%.The XVS System's performance in accurate placement of pedicle screws in the lumbosacral vertebrae had an overall accuracy of 97.7%. These preliminary results were comparable to the accuracy of other manual computer-assisted navigation systems reported in the literature.

Printed cutting and repositioning templates could bring superior accuracy when transferring a maxillary plan to the operating room compared to a wafer-based method. However, the effect of these methods in different types of cases is inconclusive. The objective of the study was to compare the accuracy when using printed occlusal splints versus templates in simple and complicated cases.A retrospective cohort study design was used. Complicated cases were defined as cases involving impaction movement of more than 2 mm, occlusal plane canting of more than 3°, or midline discrepancies of more than 2.5 mm. Other cases were simple cases. Enrolled patients were randomly allocated into the digital occlusal splint (DOS) cohort and the digital templates (DT) cohort. The outcome variable was surgical accuracy, defined as the average deviation between the planned and postsurgical locations of bilateral maxillary central incisors, canines, first premolars, and first molars. Predictor variables were 1) operative complexity, simple versus complicated; and 2) technique for positioning the maxilla, DOS versus DT. Covariates were age and planned surgical movement. Two-way analysis of variance was used.Seventy patients were included in this study. Thirty-three were in the DOS cohort, and 37 in the DT cohort. The average deviation was significantly smaller in the complicated cases in the DT cohort (1.37 mm; 95% confidence interval, 1.08-1.66 mm) than that in the DOS cohort (2.47 mm; 95% confidence interval, 1.92-3.02 mm) (P = .002). The deviations in anteroposterior direction of complicated cases in the DT cohort were smaller than the corresponding values of the DOS cohort (P = .035). There is no significant difference between the deviation values of simple and complicated cases using templates (P = .116).These results indicate that in complicated cases, printed guiding templates exhibit better accuracy for repositioning the maxilla than printed occlusal splints, and the effect of templates in different cases proved to be stable.

The aim of this study is to compare the accuracy of maxilla positioning in orthognathic surgery with the use of custom-made devices (cutting guides and patient-fitted osteosynthesis plates) comparing to CAD/CAM splints. A prospective randomized study was performed. Patients with dentofacial deformities undergoing orthognathic surgery were compared, using customized guides (experimental group) vs. CAD/CAM surgical splints (control group) for the repositioning of the upper maxilla. Preoperative and postoperative CT scans were used to compare positioning and fixation of the maxilla in the three planes of space. A total of 30 patients were included in the study (15 patients in each study group). The mean error obtained with customized guides was 0.8 mm (range 0.1-1.9) in the anterior-posterior axis, 0.4 mm (range 0-1.4) in the vertical axis and 0.2 mm (range 0-1.1) in the horizontal axis. There were statistically significant differences in the anterior-posterior and vertical axes in favour of the customized implants, whereas there were no differences in the horizontal plane. Furthermore, there was a mean reduction of the operative time of 36.5 min in the experimental group. Within the limitations of the study it seems that patient specific surgical guides should be preferred when accuracy of repositioning of the maxilla and saving operative time are the priority.

Three-dimensional printing has introduced new manufacturing methods. However, information on the influence of the specific printing technology, material, sterilization, and the comparison between printing and milling on the accuracy of surgical guides is lacking.The purpose of this in vitro study was to evaluate the influence of the manufacturing method (printing and milling), printing technology stereolithography (SLA) and digital light processing (DLP), material, and sterilization on the accuracy of digitally designed surgical implant guides.Resin patient replicas with a single edentulous space were used to place 132 implants with digitally designed surgical guides. The accuracy of postoperative implant position was analyzed for the manufacturing method (printing and milling), resin materials, and preoperative autoclaving. To determine 3D accuracy, angular displacement, mean horizontal crestal, apical displacement, and the linear vertical displacement at the apex were calculated separately for each group (n=12). In addition, the surgical guides were qualitatively analyzed by using field emission scanning electron micrograph.The postoperative angular deviation ranged from 0.76 ±0.52 degrees (Rapidshape D20II with NextDent SG) to 2.43 ±0.64 degrees (Form2 with NextDent SG) (P.001). Linear horizontal displacement at the crest was smallest for Rapidshape D20II with 3Delta Guide (0.27 ±0.08 mm) and highest for Form2 with NextDent SG (0.54 ±0.10 mm) (P.001). Linear horizontal displacement at the apex ranged from 0.36 ±0.10 mm (SolFlex 350 with V-Print SG) to 0.89 ±0.32 mm (Form2 with NextDent SG) (P.001). Considering the vertical position displacement was no more than 0.43 ±0.07 mm (Form2 with NextDent SG) short of the apex, none of the implant tips were displaced apically. Preoperative autoclaving differentially impaired the accuracy of surgical guides.The specific manufacturing technique, the 3D printing device, the resin material, and the application of preoperative sterilization all affected the accuracy of the postoperative implant position. Irrespective of the manufacturing method, all implants were placed within the commonly accepted safety distance.

Navigation systems for spinal fusion surgery rely on intraoperative computed tomography (CT) or fluoroscopy imaging. Both expose patient, surgeons and operating room staff to significant amounts of radiation. Alternative methods involving intraoperative ultrasound (iUS) imaging have recently shown promise for image-to-patient registration. Yet, the feasibility and safety of iUS navigation in spinal fusion have not been demonstrated.To evaluate the accuracy of pedicle screw insertion in lumbar and thoracolumbar spinal fusion using a fully automated iUS navigation system.Prospective porcine cadaver study.Five porcine cadavers were used to instrument the lumbar and thoracolumbar spine using posterior open surgery. During the procedure, iUS images were acquired and used to establish automatic registration between the anatomy and preoperative CT images. Navigation was performed with the preoperative CT using tracked instruments. The accuracy of the system was measured as the distance of manually collected points to the preoperative CT vertebral surface and compared against fiducial-based registration. A postoperative CT was acquired, and screw placements were manually verified. We report breach rates, as well as axial and sagittal screw deviations.A total of 56 screws were inserted (5.50 mm diameter n=50, and 6.50 mm diameter n=6). Fifty-two screws were inserted safely without breach. Four screws (7.14%) presented a medial breach with an average deviation of 1.35±0.37 mm (all2 mm). Two breaches were caused by 6.50 mm diameter screws, and two by 5.50 mm screws. For vertebrae instrumented with 5.50 mm screws, the average axial diameter of the pedicle was 9.29 mm leaving a 1.89 mm margin in the left and right pedicle. For vertebrae instrumented with 6.50 mm screws, the average axial diameter of the pedicle was 8.99 mm leaving a 1.24 mm error margin in the left and right pedicle. The average distance to the vertebral surface was 0.96 mm using iUS registration and 0.97 mm using fiducial-based registration.We successfully implanted all pedicle screws in the thoracolumbar spine using the ultrasound-based navigation system. All breaches recorded were minor (2 mm) and the breach rate (7.14%) was comparable to existing literature. More investigation is needed to evaluate consistency, reproducibility, and performance in surgical context.Intraoperative US-based navigation is feasible and practical for pedicle screw insertion in a porcine model. It might be used as a low-cost and radiation-free alternative to intraoperative CT and fluoroscopy in the future.

Purpose: Automatic surgical instruction generation is a crucial part for intra-operative surgical assistance. However, understanding and translating surgical activities into human-like sentences are particularly challenging due to the complexity of surgical environment and the modal gap between images and natural languages. To this end, we introduce SIG-Former, a transformer-backboned generation network to predict surgical instructions from monocular RGB images. Methods: Taking a surgical image as input, we first extract its visual attentive feature map with a fine-tuned ResNet-101 model, followed by transformer attention blocks to correspondingly model its visual representation, text embedding and visual–textual relational feature. To tackle the loss-metric inconsistency between training and inference in sequence generation, we additionally apply a self-critical reinforcement learning approach to directly optimize the CIDEr score after regular training. Results: We validate our proposed method on DAISI dataset, which contains 290 clinical procedures from diverse medical subjects. Extensive experiments demonstrate that our method outperforms the baselines and achieves promising performance on both quantitative and qualitative evaluations. Conclusion: Our experiments demonstrate that SIG-Former is capable of mapping dependencies between visual feature and textual information. Besides, surgical instruction generation is still at its preliminary stage. Future works include collecting large clinical dataset, annotating more reference instructions and preparing pre-trained models on medical images.

The evolution of virtual surgical planning (VSP) in the last 2 decades has led to improved precision and efficiency for orthognathic surgery, both pre- and intraoperatively. This study evaluates a single surgeon's experience with this technology over the past 6 years. Patients undergoing orthognathic surgery using VSP with the senior author between 2015 and 2021 were retrospectively reviewed. Virtual surgical planning -specific data including incidence of midline/cant correction, occlusal equilibration, serial splints, segmental osteotomies, and custom plates were recorded and analyzed. Sixty patients undergoing orthognathic surgery using simulated VSP in the study period were retrospectively reviewed. Mean age at time of surgery was 23.5±7.9 years. Forty-nine patients (81.7%) underwent LeFort I osteotomy combined with at least 1 additional procedure (eg,unilateral or bilateral sagittal split osteotomy, condylectomy, genioplasty, etc.). Twenty-six (43.3%) of patients in the studied cohort underwent maxillary midline correction, 30.0% required occlusal equilibration, 36.7% underwent maxillary molar cant correction, 30.0% underwent mandibular cant correction, and 21.7% required both maxillary and mandibular cant correction. Three patients required serial splinting, and 15 patients (25.0%) required modification of splint design. Custom plates were utilized in 15 patients (25.0%). This study demonstrates the utility of VSP in accurately detecting occlusal cants, asymmetry, and occlusal interferences. Virtual surgical planning also allows for a dynamic preoperative planning process, offering the surgeon a high degree of versatility in splint design, and the ability to fabricate multiple customized splints for each case. This is particularly useful in patients with limited or unpredictable soft tissue elasticity.

Spinal deformation during surgical intervention (caused by patient positioning and/or the correction of malalignment) confounds conventional navigation due to the assumptions of rigid transformation. Moreover, the ability to accurately quantify spinal alignment in the operating room would provide an assessment of the surgical product via metrics that correlate with clinical outcomes.A method for deformable 3D-2D registration of preoperative CT to intraoperative long-length tomosynthesis images is reported for an accurate 3D evaluation of device placement in the presence of spinal deformation and automated evaluation of global spinal alignment (GSA).Long-length tomosynthesis ("Long Film," LF) images were acquired using an O-arm imaging system (Medtronic, Minneapolis USA). A deformable 3D-2D patient registration was developed using multi-scale masking (proceeding from the full-length image to local subvolumes about each vertebra) to transform vertebral labels and planning information from preoperative CT to the LF images. Automatic measurement of GSA (main thoracic kyphosis [MThK] and lumbar lordosis [LL]) was obtained using a spline fit to registered labels. The "Known-Component Registration" method for device registration was adapted to the multi-scale process for 3D device localization from orthogonal LF images. The multi-scale framework was evaluated using a deformable spine phantom in which pedicle screws were inserted, and deformations were induced over a range in LL ∼25°-80°. Further validation was carried out in a cadaver study with implanted pedicle screws and a similar range of spinal deformation. The accuracy of patient and device registration was evaluated in terms of 3D translational error and target registration error, respectively, and the accuracies of automatic GSA measurements were compared to manual annotation.Phantom studies demonstrated accurate registration via the multi-scale framework for all vertebral levels in both the neutral and deformed spine: median (interquartile range, IQR) patient registration error was 1.1 mm (0.7-1.9 mm IQR). Automatic measures of MThK and LL agreed with manual delineation within -1.1° ± 2.2° and 0.7° ± 2.0° (mean and standard deviation), respectively. Device registration error was 0.7 mm (0.4-1.0 mm IQR) at the screw tip and 0.9° (1.0°-1.5°) about the screw trajectory. Deformable 3D-2D registration significantly outperformed conventional rigid registration (p 0.05), which exhibited device registration errors of 2.1 mm (0.8-4.1 mm) and 4.1° (1.2°-9.5°). Cadaver studies verified performance under realistic conditions, demonstrating patient registration error of 1.6 mm (0.9-2.1 mm); MThK within -4.2° ± 6.8° and LL within 1.7° ± 3.5°; and device registration error of 0.8 mm (0.5-1.9 mm) and 0.7° (0.4°-1.2°) for the multi-scale deformable method, compared to 2.5 mm (1.0-7.9 mm) and 2.3° (1.6°-8.1°) for rigid registration (p 0.05).The deformable 3D-2D registration framework leverages long-length intraoperative imaging to achieve accurate patient and device registration over the extended lengths of the spine (up to 64 cm) even with strong anatomical deformation. The method offers a new means for the quantitative validation of spinal correction (intraoperative GSA measurement) and the 3D verification of device placement in comparison to preoperative images and planning data.

Urethral injury is one of the most important complications in transanal total mesorectal excision (TaTME) in male patients with rectal cancer. The purpose of this study was to investigate holographic image-guided surgery in TaTME.Polygon (stereolithography) files were created and exported from SYNAPSE VINCENT, and then uploaded into the Holoeyes MD system (Holoeyes Inc., Tokyo, Japan). After uploading the data, the three-dimensional image was automatically converted into a case-specific hologram. The hologram was then installed into the head mount display, HoloLens (Microsoft Corporation, Redmond, WA). The surgeons and assistants wore the HoloLens when they performed TaTME.In a Wi-Fi-enabled operating room, each surgeon, wearing a HoloLens, shared the same hologram and succeeded in adjusting the hologram by making simple hand gestures from their respective angles. The hologram contributed to better comprehension of the positional relationships between the urethra and the surrounding pelvic organs during surgery. All surgeons were able to properly determine the dissection line.This first experience suggests that intraoperative holograms contributed to reducing the risk of urethral injury and understanding transanal anatomy. Intraoperative holograms have the potential to become a new next-generation surgical support tool for use in spatial awareness and the sharing of information between surgeons.

The surgery of glioblastoma (GBM) requires a maximal resection of the tumor when it is safe and feasible. The infiltrating growth property of the GBM makes it a challenge for neurosurgeons to identify the tumor tissue even with the assistance of the surgical microscope. This highlights the urgent requirement for imaging techniques that can differentiate tumor tissues during surgery in real time. Fluorescence image-guided surgery of GBM has been investigated using several non-specific fluorescent probes that emit light in the visible and the first near-infrared window (NIR-I, 700-900 nm), which limit the detection accuracy because of the non-specific targeting mechanism and spectral characteristics. Targeted NIR-II (1000-1700 nm) fluorescent probes for GBM are thus highly desired. The folate receptor (FR) has been reported to be upregulated in GBM, which renders it to be a promising target for specific tumor imaging.In this study, the folic acid (FA) that can target the FR was conjugated with the clinically approved indocyanine green (ICG) dye and DOTA chelator for radiolabeling withsup64/supCu to achieve targeted positron emission tomography (PET) and fluorescence imaging of GBM.Surprisingly it was found that the resulted bioconjugate, DOTA-FA-ICG and non-radioactivesupnat/supCu-DOTA-FA-ICG, were both self-assembled into nanoparticles with NIR-II emission signal. The radiolabeled DOTA-FA-ICG,sup64/supCu-DOTA-FA-ICG, was found to specifically accumulate in the orthotopic GBM models using in vivo PET, NIR-II, and NIR-I fluorescence imaging. The best time window of fluorescence imaging was demonstrated to be 24 h after DOTA-FA-ICG injection. NIR-II fluorescence image-guided surgery was successfully conducted in the orthotopic GBM models using DOTA-FA-ICG. All the fluorescent tissue was removed and proved to be GBM by the Hamp;E examination.Overall, our study demonstrates that the probes,sup64/supCu-DOTA-FA-ICG and DOTA-FA-ICG, hold promise for preoperative PET examination and intraoperative NIR-II fluorescence image-guided surgery of GBM, respectively.

Hypertensive intracerebral hemorrhage (HICH) is an intracerebral bleeding disease that affects 2.5 per 10,000 people worldwide each year. An effective way to cure this disease is puncture through the dura with a brain puncture drill and tube; the accuracy of the insertion determines the quality of the surgery. In recent decades, surgical navigation systems have been widely used to improve the accuracy of surgery and minimize risks. Augmented reality- and mixed reality-based surgical navigation is a promising new technology for surgical navigation in the clinic, aiming to improve the safety and accuracy of the operation. In this study, we present a novel multimodel mixed reality navigation system for HICH surgery in which medical images and virtual anatomical structures can be aligned intraoperatively with the actual structures of the patient in a head-mounted device and adjusted when the patient moves in real time while under local anesthesia; this approach can help the surgeon intuitively perform intraoperative navigation. A novel registration method is used to register the holographic space and serves as an intraoperative optical tracker, and a method for calibrating the HICH surgical tools is used to track the tools in real time. The results of phantom experiments revealed a mean registration error of 1.03 mm and an average time consumption of 12.9 min. In clinical usage, the registration error was 1.94 mm, and the time consumption was 14.2 min, showing that this system is sufficiently accurate and effective for clinical application.

As a pioneer center in the field of stereotaxy, Sainte-Anne school has always advocated the use of intraoperative imaging for stereotactic procedures to optimize both safety and accuracy. With the advent of intraoperative mobile CT unit, the robot-assisted stereotactic biopsy procedure has been recently updated.Herein, we aim at describing our new surgical procedure that combines robotic assistance (NeuroMate, Renishaw) and intraoperative cone beam CT imaging (O-Arm, Medtronic).Intraoperative imaging with the O-Arm was efficiently incorporated into the workflow. This new equipment leads to optimizing operative time and an easier realization of intraoperative imaging.

The aim of this study was accuracy assessment of placed implants in full-arch cases using specific software and hardware to perform static computer-assisted implantology and immediately loaded prostheses. The degree of deviation existing between planned and achieved implants was carried out by a new noninvasive measurement procedure of the implant position performed on stone casts.Fourteen stone casts retrieved from 14 full-arch fully guided implant treatments were selected to perform the study. Each cast, manufactured for the surgical treatment by using a specific laboratory kit, was obtained from the respective surgical guide. A sleeve for each implant was embedded into the guide, which helped the examiners to manufacture a stone cast per guide containing the implant analogs, which was used to recover the final position of the planned implants. A total sample of 60 implants were assessed. The postoperative casts, poured to produce the immediate prostheses, were then processed by a contact (or tactile) scanner, and the generated standard tessellation language (STL) files were overlapped (best-fit alignment) using engineering software that revealed all the measured discrepancies. In terms of accuracy, differences relating to arch, assessed bone quality, implant length, and drill length (prolongation short or long) were reported.The use of a noninvasive tactile scanner revealed mean entry point horizontal deviations of 0.30 mm (SD: 0.39 mm), mean entry point vertical deviations of 0.20 mm (SD: 0.25 mm), mean apical horizontal deviations of 0.50 mm (SD: 0.73 mm), and mean apical vertical deviations of 0.24 mm (SD: 0.28 mm). The frontal and lateral angular deviations were investigated, and corresponding mean values of 1.99 degrees (SD: 2.30 degrees) and 1.80 degrees (SD: 2.44 degrees) were detected.The reported results demonstrate that the contact tactile scan is a viable and biologic way to assess implant deviations.

The aim of this study was to evaluate the accuracy of navigation-assisted maxillofacial reconstruction and to identify the predictors of the clinical outcomes. A total of 112 patients who underwent navigation-assisted maxillofacial reconstruction with free flaps between 2014 and 2019, performed by a single surgical team, were assessed. Accuracy was evaluated by superimposing the postoperative computed tomography data with the preoperative virtual surgical plan. Predictors of the clinical outcomes affecting the accuracy were identified and analysed. The mean deviation and root mean square (RMS) estimate of the orbital, maxillary, and mandibular reconstructions were 0.88 ± 3.25 mm and 3.38 ± 0.73 mm, 0.77 ± 3.44 mm and 3.69 ± 0.82 mm, and 1.07 ± 4.16 mm and 4.67 ± 3.95 mm, respectively (P < 0.05). There was no significant difference in orbital volume or projection between the preoperative, postoperative, and healthy orbits (P = 0.093 and P = 0.225, respectively). Multivariate linear regression analysis confirmed significant associations between the accuracy of navigation-assisted mandibular reconstruction and preservation of the condyle, type of reconstruction, type of osteosynthesis plate, and number of bony segments. Navigation-assisted midface reconstruction yielded a higher level of accuracy in the final surgical outcome when compared to mandibular reconstruction. Computer-assisted techniques and intraoperative navigation can be an alternative or adjunct to current surgical techniques to improve the final surgical outcome, especially in more complex maxillofacial reconstructions.

Transcatheter cardiovascular interventions have the advantage of patient safety, reduced surgery time and minimal trauma to the patient's body. Transcathether interventions, which are performed percutaneously, are limited by the lack of direct line of sight with the procedural tools and the patient anatomy. Therefore, such interventional procedures rely heavily on image guidance for navigating toward and delivering therapy at the target site. Vascular navigation via the inferior vena cava, from the groin to the heart, is an imperative part of most transcatheter cardiovascular interventions including heart valve repair surgeries and ablation therapy. Traditionally, the inferior vena cava is navigated using fluoroscopic techniques such as venography and computed tomography venography. These X-ray-based techniques can have detrimental effects on the patient as well as the surgical team, causing increased radiation exposure, leading to risk of cancer, fetal defects and eye cataracts. The use of a heavy lead apron has also been reported to cause back pain and spine issues, thus leading to interventionalist's disc disease. We propose the use of a catheter-based ultrasound augmented with electromagnetic tracking technology to generate a vascular roadmap in real time and perform navigation without harmful radiation. In this pilot study, we used spatially tracked intracardiac echocardiography to reconstruct a vessel from a phantom in a 3-D virtual environment. We illustrate how the proposed ultrasound-based navigation will appear in a virtual environment, by navigating a tracked guidewire within the vessels in the phantom without any radiation-based imaging. The geometric accuracy is assessed using a computed tomography scan of the phantom, with a Dice coefficient of 0.79. The average distance between the surfaces of the two models comes out to be 1.7 ± 1.12 mm.

Planning a three-dimensional (3D) osteotomy using computed tomography (CT) data is useful especially in cases with complex deformities. Furthermore, CT-based navigation system allows the preoperative virtual planning to be replicated in actual surgery. However, one disadvantage when using navigation systems is that when osteotomies are performed on tracker-attached bone, the bone fragments on the side that were cut away cannot be tracked. This is especially problematic when performing multiple osteotomies on bones with complex deformities. We solved this problem by creating a 3D printed bone model that can be referenced intraoperatively and used in combination with the navigation system. We applied these techniques to perform segmental corrective osteotomy for a complex tibial deformity with intramedullary nail (IMN) fixation case of hereditary vitamin D-resistant hypophosphatemic rickets (HVDRR) in an adult man. Due to the patient's history of multiple surgeries, the affected tibia had a narrow and partially closed medullary canal. Therefore, we planned to use an IMN for correction and fixation of tibial deformity to protect the thin and stretched skin around the deformed tibia. With the assistance of CT-based navigation, we could perform an accurate three-dimensional tibial osteotomy. Moreover, we could perform accurate preparation of closed medullary canal for the IMN placement by referring to the 3D printed bone models. Six months after the operation, the bone union at the osteotomy sites was confirmed and the patient was able to return to his normal life and work.

This randomized controlled clinical trial was designed to compare the accuracy of machine-vision (MV)-based dynamic navigation (DN)-assisted immediate implant placement with the conventional freehand technique.A total of 24 subjects requiring immediate implant placement in maxillary anterior teeth were randomly assigned to either the control (freehand by an experienced surgeon, n = 12) or the test group (MV-DN, n = 12). Implant platform, implant apex, angular, and depth deviations with respect to prosthetically guided digital planning and differences in implant insertion torque (ITV) and implant stability quotient (ISQ) were compared between the groups.MV-DN resulted in more accurate immediate implant position: significantly smaller global platform deviation (1.01 ± 0.41 mm vs. 1.51 ± 0.67 mm, p = .038), platform depth deviation (0.44 ± 0.46 mm vs. 0.95 ± 0.68 mm, p = .045), global apex deviation (0.88 ± 0.43 mm vs. 1.94 ± 0.86 mm, p = .001), and lateral apex deviation (0.68 ± 0.30 mm vs. 1.61 ± 0.88 mm, p = .004) were found in MV-DN compared to controls. No significant intergroup differences were observed for ITV and ISQ.MV-DN achieved more precise immediate implant position and comparable primary stability. Further trials are necessary to assess the benefits in terms of esthetics and tissue health/stability.

Accurate reconstruction of orbital and midfacial defects following extensive globe-sparing maxillectomy is challenging, due to the complex anatomy of facial skeleton. The aim of this study is to evaluate the outcomes of individually bent titanium mesh in navigation-assisted reconstruction of post-ablative orbits in comparison with that without intraoperative navigation. Forty-one patients undergone globe-sparing maxillectomy and orbital floor reconstruction using individually bent titanium mesh with or without intraoperative navigation were assessed. Pre- and postoperative orbital projection and volume measurements were performed on both orbits. The unaffected orbit was used as a control for comparison. True-to-original orbital reconstruction was achieved in this study. The average difference of globe projection and orbital volume between unaffected and reconstructed orbits was 0.8 ± 0.5 mm and 0.9 ± 1.2cm

The aim of this systematic review is to evaluate the accuracy of waferless osteotomy procedures in orthognathic surgery with a secondary aim to determine the cost-effectiveness of the procedure. A literature search was conducted on the databases PubMed and Scopus, with PRISMA guidelines followed. An initial yield of 4149 articles were identified, ten of which met the desired inclusion criteria. The total sample of patients undergoing waferless osteotomies included in this review was 142 patients. Nine of the studies used surgical cutting guides along with customised surgical plates to eliminate the surgical wafer and one study used pre-bent locking plates instead of customised plates. The eligible articles determined their surgical accuracy by comparing the positions of bony or dental landmarks on the pre-operative and post-operative images. The articles all reported acceptable accuracy within previously established clinical parameters. The majority of authors concluded that it is an accurate surgical approach and can be cost effective which is often a barrier to novel techniques however there were studies that contrasted the view of the cost efficacy. Due to the lack of published randomised controlled trials, current evidence is not strong enough to recommend the use of surgical cutting guides and customised/pre-bent plates for orthognathic surgery.

This translational study aims to investigate the clinical benefits of indocyanine green (ICG) based near-infrared window II (NIR-II) fluorescence image-guided surgery (FGS) on high-grade glioma (HGG) patients.Patients were randomly assigned to receive FGS or traditional white light image-guided surgery (WLS). The detection rate of NIR-II fluorescence was observed. Complete resection rate, progression-free survival (PFS), overall survival (OS), and neurological status were compared. Tissue samples were obtained from the FGS group, with the diagnosis based on the surgeons and the fluorescence recorded for comparison of diagnostic capability. Patients with WHO grade III gliomas or glioblastomas (GBM) were analyzed separately.15 GBM and 4 WHO grade III glioma patients in the FGS group and 18 GBM and 4 WHO grade III glioma patients in the WLS group were enrolled. The detection rate of NIR-II fluorescence was 100% for GBM. The complete resection rate was significantly increased by the FGS for GBM (FGS, 100% [95% CI 73.41-100] vs. WLS, 50% [95% CI 29.03-70.97], P = 0.0036). The PFS and OS of the FGS group were also significantly prolonged (Median PFS: FGS, 9.0 months vs. WLS, 7.0 months, P0.0001; Median OS: FGS, 19.0 months vs. WLS, 15.5 months, P = 0.0002). No recurrence was observed in WHO grade III glioma patients.NIR-II FGS achieves a much better complete resection rate of GBM than conventional WLS, leading to greatly improved survival of GBM patients.NIR-II FGS is a highly promising technique worthy of exploring more clinical applications.

In studies that assessed the accuracy of implant surgical guides, evaluations were based on the placement position of the implant by using a manufactured surgical guide. However, such assessments could involve errors that may occur during implant placement. Therefore, evaluating the 3-dimensional accuracy of the fabrication of the implant surgical guide itself is not enough. In the evaluation method described in this article, location-related information is obtained by connecting a scan body to the sleeve of the surgical guide instead of directly placing the implant. This helps to evaluate the accuracy of the surgical guide without errors in the placement of an implant.

The use of surgical navigation has been shown to reduce revision rates after total knee arthroplasty (TKA) in patients65 years of age. It is unknown if this benefit extends to older patients. We hypothesized that the use of surgical navigation would reduce rates of all-cause revision in patients of all ages.In this cohort study, we queried the Truven MarketScan all-payer database to identify patients who underwent TKA from 2007 to 2015. Current Procedural Terminology codes were used to create 2 groups based on whether intraoperative navigation was used. Demographics, comorbidities, complications, and revision rates were determined. International Classification of Diseases codes were used to determine reasons for revision.The conventional TKA cohort included 312,173 patients. The navigation cohort included 20,881 patients. There were not any clinically significant differences in demographics between the cohorts. All-cause revision rates were lower in the navigation cohort at 1 year (0.4% vs 0.5%, P = .04), 2 years (0.7% vs 0.9%, P = .003), and 5 years (0.9% vs 1.3%, P.001) of follow-up. Revisions for mechanical loosening were more common in the conventional cohort (30.8% vs 21.9%, P = .009). Rates of revision for other causes, including infection, did not differ between groups, with the numbers available.The use of surgical navigation yielded a 30.7% reduction in the all-cause revision rate at 5-year follow-up compared to conventional TKA. This benefit increased as follow-up duration increased. Increased usage of this inexpensive technology, from the current 6.3% in this US cohort, may reduce healthcare costs.III.