Search

Norway spruce (Picea abies L. Karst) is one of the most important forest tree species with significant economic and ecological impact in Europe. For decades, genomic and genetic studies on Norway spruce have been challenging due to the large and repetitive genome (19.6 Gb with more than 70% being repetitive). To accelerate genomic studies, including population genetics, genome‐wide association studies (GWAS) and genomic selection (GS), in Norway spruce and related species, we here report on the design and performance of a 50K single nucleotide polymorphism (SNP) genotyping array for Norway spruce. The array is developed based on whole genome resequencing (WGS), making it the first WGS‐based SNP array in any conifer species so far. After identifying SNPs using genome resequencing data from 29 trees collected in northern Europe, we adopted a two‐step approach to design the array. First, we built a 450K screening array and used this to genotype a population of 480 trees sampled from both natural and breeding populations across the Norway spruce distribution range. These samples were then used to select high‐confidence probes that were put on the final 50K array. The SNPs selected are distributed over 45,552 scaffolds from the P. abies version 1.0 genome assembly and target 19,954 unique gene models with an even coverage of the 12 linkage groups in Norway spruce. We show that the array has a 99.5% probe specificity, >98% Mendelian allelic inheritance concordance, an average sample call rate of 96.30% and an SNP call rate of 98.90% in family trios and haploid tissues. We also observed that 23,797 probes (50%) could be identified with high confidence in three other spruce species (white spruce [Picea glauca], black spruce [P. mariana] and Sitka spruce [P. sitchensis]). The high‐quality genotyping array will be a valuable resource for genetic and genomic studies in Norway spruce as well as in other conifer species of the same genus. [ABSTRACT FROM AUTHOR]

This study ascertained the accumulation of polyprenol from four Irish conifer species Picea sitchensis, Cedrus atlantica 'Glauca', Pinus sylvestris and Taxus baccata and one flowering tree Cotoneaster hybrida using supercritical fluid extraction with carbon dioxide (SFE-CO2) and solvent extraction. The effects of SFE-CO2 parameters such as temperature (ranged from 40 to 70 ∘ C ), pressure (ranged from 100 to 350 bars) and dynamic time (from 70 min to 7 h) were analysed on the extraction efficiency of polyprenol. Qualitative and quantitative analysis of polyprenol was examined using high-performance liquid chromatography. Results showed that P. sylvestris accumulated the highest polyprenol yield of 14.00 ± 0.4 mg g−1 DW when extracted with hexane:acetone (1:1 v/v). However, with SFE-CO2 conditions of 200 bars, 70 ∘ C , 7 h, with absolute ethanol as a cosolvent with a flow rate of 0.05 ml min−1, P. sitchensis accumulated the highest polyprenol yield of 6.35 ± 0.4 mg g−1DW. This study emphasised the potential application of SFE-CO2 in the extraction of polyprenol as an environmentally friendly method to be used in pharmaceutical and food industries. [ABSTRACT FROM AUTHOR]

There is a strong policy move in Britain to improve forest resilience to climate change by increasing stand structural and species diversity. Although currently little used in Britain, the technique of underplanting allows regeneration and diversification of stands while avoiding some of the disadvantages of clearfelling. Two experiments were examined: (1) the growth and survival of five underplanted conifer species of differing shade tolerance in a shelterwood and (2) compared performance of underplanted and open-grown Douglas-fir seedlings on restocking sites. Underplanted Sitka spruce, Norway spruce, noble fir, European silver fir and Douglas-fir were all able to survive and grow. However increased exposure following overstorey removal resulted in some damage and 'socketing', especially to taller seedlings, particularly Douglas-fir. This may be linked to poor root development when growing under an overstorey. Microclimate conditions on some underplanted sites were more sheltered from extreme climatic conditions, and in some cases this improved survival of Douglas-fir seedlings. However, seedling growth rates were reduced compared with those on open sites probably due to lower light levels. Underplanting may help to improve establishment success of some species, particularly in exposed areas. However, the shelter benefits of underplanting must be carefully balanced against the trade-off with lower light, and underplanting is likely to be more successful where low canopy density is maintained. [ABSTRACT FROM AUTHOR]

Masting behaviour of Sitka spruce Picea sitchensis may influence Eurasian siskin Spinus spinus breeding ecology as breeding siskins specialize on spruce seeds. We caught siskins and other small passerines over 16 years using mist nets adjacent to large plantations of mature Sitka spruce. We sexed, aged, measured and weighed the birds and collected feather samples from fledglings to measure nitrogen and carbon stable isotope ratios. Siskins departed in late summer, and returned, and bred earlier in years of higher cone abundance. Nitrogen and carbon isotopes indicated that siskins fed their chicks on Sitka spruce seeds in most years, and more so in years of high cone production. More siskins were caught following heavy rainfall, when the cones had closed, encouraging the birds to seek alternative food sources. Fledglings were not heavier or larger in years with higher cone crops but were more numerous. However, the age ratio of siskins caught the following year was unaffected by cone crop. Given their reliance on Sitka spruce seeds, climate change may have a major impact on siskin numbers by altering the availability of Sitka spruce seeds, either through changes in masting patterns or cone opening, or due to climate-related changes in forestry practices. Siskins represent a valuable study system to conservation ecology, where a native species is ecologically reliant on introduced taxa. [ABSTRACT FROM AUTHOR]

The importance of labile soil carbon (C) and nitrogen (N) in soil biogeochemical processes is now well recognized. However, the quantification of labile soil C and N in soils and the assessment of their contribution to ecosystem C and N budgets is often constrained by limited information on spatial variability. To address this, we examined spatial variability in dissolved organic carbon (DOC) and dissolved total nitrogen (DTN) in a Sitka spruce forest in central Ireland. The results showed moderate variations in the concentrations of DOC and DTN based on the mean, minimum, and maximum, as well as the coefficients of variation. Residual values of DOC and DTN were shown to have moderate spatial autocorrelations, and the nugget sill ratios were 0.09% and 0.10%, respectively. Distribution maps revealed that both DOC and DTN concentrations in the study area decreased from the southeast. The variability of both DOC and DTN increased as the sampling area expanded and could be well parameterized as a power function of the sampling area. The cokriging technique performed better than the ordinary kriging for predictions of DOC and DTN, which are highly correlated. This study provides a statistically based assessment of spatial variations in DOC and DTN and identifies the sampling effort required for their accurate quantification, leading to improved assessments of forest ecosystem C and N budgets. [ABSTRACT FROM AUTHOR]

Promoting patchy recruitment of shade tolerant tree species into the midstory is an important step in developing structural diversity in second-growth stands. Variable-density thinning (VDT) has been proposed as a strategy for accelerating structural diversity, as its combination of within-stand treatments (harvest gaps, thinning, and non-harvested skips) should create variable overstory and understory conditions. Here we report on western hemlock (Tsuga heterophylla (Raf.) Sarg.) seedling and sapling densities in five mixed-conifer stands and Sitka spruce (Picea sitchensis (Bong.) Carr.) seedling and sapling densities in two stands in western Washington at 3,7, 10, and 16–17 years after VDT. Additionally, we report on western hemlock advance regeneration growth and survival in two stands over 14 years. Western hemlock seedling density was highest in the thinned treatment but only significantly so in Year 10. In contrast, the gaps contained significantly more western hemlock saplings in Years 7 and 10 and significantly greater growth of western hemlock advance regeneration through Year 10. Skips embedded within the VDT did not differ significantly from unharvested reserves in terms of seedling or sapling densities of either species. Sitka spruce seedling density was highest in the gap and thinned treatments, but saplings were uncommon in all treatments. Collectively, these results indicate that our variant of VDT promoted patchy, midstory recruitment of western hemlock but failed to recruit Sitka spruce saplings in either stand where it established. Consequently, more intensive variants of VDT may be required to promote midstory recruitment of species less tolerant of shade than western hemlock. [ABSTRACT FROM AUTHOR]

The effect of clearfell harvesting on soil greenhouse gas (GHG) fluxes of carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) was assessed in a Sitka spruce forest growing on a peaty gley organo-mineral soil in northern England. Fluxes from the soil and litter layer were measured monthly by the closed chamber method and gas chromatography over four years in two mature stands, with one area harvested after the first year. Concurrent measurements of soil temperature and moisture helped to elucidate reasons for the changes in fluxes. In the three years after felling, there was a significant increase in the soil temperature, particularly between June and November (3 to 5 °C higher), and in soil moisture which was 62 % higher in the felled area, and these had pronounced effects on the GHG balance, in addition to the removal of the trees and their carbon input to the soil. Annual soil CO2 effluxes reduced to almost a third in the first year after felling (a drop from 24.0 to 8.9 t CO2 ha-1 yr-1) and half in the second and third year (mean 11.8 t CO2 ha-1 yr-1) compared to before felling, while those from the unfelled area were little changed. Annual effluxes of N2O more than doubled in the first two years (from 1.0 to 2.3 and 2.5 t CO2e ha-1 yr-1, respectively), although by the third year they were only 20 % higher (1.2 t CO2e ha-1 yr-1). CH4 fluxes changed from a small net uptake of -0.03 t CO2e ha-1 yr-1 before felling to a small efflux increasing over the 3 years to 0.34 t CO2e ha-1 yr-1, presumably because of the wetter soil after felling. Soil CO2 effluxes dominated the total net GHG emission calculated using the global warming potential (GWP) of the three gases, but N2O contributed up to 20 % of the total annual emissions. This study showed fluxes of CO2, CH4 and N2O responded differently to clearfelling due to the significant changes in soil biotic and abiotic factors and showed large variations between years. This demonstrates the need for multi-year measurements of all GHGs to enable a robust estimate of the effect of the clearfell phase on the GHG balance of managed forests. This is one of a very few multi-year monitoring studies to assess the effect of clearfell harvesting on soil GHG fluxes. [ABSTRACT FROM AUTHOR]

Post‐disturbance losses in nitrogen (N) may diminish forest productivity, and soils with inherently 'open' N cycles are considered the most vulnerable to leaching losses of NO3‐. Monitoring ongoing N depletion from soil profiles is challenging, but tree‐ring δ15N of regenerating stands may offer an effective method for assessing site‐specific, long‐term soil N dynamics. Evidence to date is mixed, however, and includes increasing, unchanging or decreasing tree‐ring δ15N in young stands following stand‐level disturbances, possibly because of contrasting soil N availability among study sites. In addition, a consensus on post‐disturbance N trajectories is hampered by the inconsistent patterns in tree‐ring δ15N found between tree species of differing mycorrhizal association.We compared tree‐ring δ15N of two conifer species (Picea sitchensis with ectomycorrhizal fungi and Thuja plicata with arbuscular mycorrhiza) from a replicated silviculture trial across temperate rainforests of Vancouver Island (Canada). A natural gradient in soil N status across the six sites, driven largely by topography and parent materials, was demonstrated by in situ increases in N mineralization and nitrification rates with declining C:N ratios for both organic horizons and mineral soils.Five decades after timber harvest, the overall trend in tree‐ring δ15N was positive, indicating a loss of nitrate from the system, but among individual plots the slope of δ15N ranged from nearly 0 to 0.13. We found the gains in tree‐ring δ15N with time were consistent between mycorrhizal types and escalated (up to 6‰) with increasing N mineralization, although less so on flat terrain with seasonal water tables. The most recent sapwood was also enriched in 15N on soils with higher N mineralization rates, perhaps slightly more so for T. plicata than P. sitchensis.Synthesis. The alignment of tree‐ring δ15N with soil N cycles may be especially strong in regenerating forests because of ontogeny effects, including the expansion of rooting depth and increases in N resorption efficiency with stand age. Sharp increases in tree‐ring δ15N underscore the vulnerability of low C:N soils with open N cycles to post‐disturbance N losses, and highlight how multiple, frequent harvesting cycles may risk substantial N depletion from these productive rainforest ecosystems. [ABSTRACT FROM AUTHOR]

Copyright of Bucovina Forestieră is the property of Stefan cel Mare University of Suceava, Faculty of Forestry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Invertebrate forest pests and pathogens can cause considerable economic losses and modern patterns of trade have facilitated the international movement of pest species on an unprecedented level. This upsurge in trade has increased the pathways available to high risk species, facilitating entry and potential establishment in nations where they were previously absent. To support policy and pest prioritization, pest risk analyses are conducted to decide 'if' and 'how' pests should be regulated in order to prevent entry or establishment; however, they cannot be carried out for every potential pest. This paper utilizes a hierarchical clustering (HC) approach to analyse distribution data for pests of Sitka spruce (Picea sitchensis (Bong.) Carr.) in order to identify species of high risk to Ireland, as well as potential source regions of these pests. The presence and absence of almost a 1000 pests across 386 regions globally are clustered based on their similarity of pest assemblages, to provide an objective examination of the highest risk pests to Irish forestry. Regional clusters were produced for each taxon analysed including the Coleoptera, Diptera, Hemiptera, Hymenoptera, Nematoda, Lepidoptera and the Fungi. The results produced by the HC analysis were interpreted with regard to biological realism and climate. Biologically meaningful clusters were produced for each of the groups, except for the Diptera and Nematoda, and each of the species analysed were ranked within their group by a quantitative risk index specific to the island of Ireland. The impact of uncertainty in the distribution data is also examined, in order to assess its influence over the final groupings produced. The outputs from this analysis suggest that the highest risk pests for Ireland's Sitka spruce plantations will originate from within Europe. Ultimately, Ireland could benefit from seeking regulation for some of the higher ranking pests identified in this analysis. This analysis provides the first of its type for Sitka spruce, as well as its application in Ireland. It also serves to highlight the potential utility of HC as a 'first approach' to assessing the risk posed by alien species to hitherto novel regions. [ABSTRACT FROM AUTHOR]

Soil fluxes of nitrous oxide (N2O) play an important role in the global greenhouse gas budget. However, the response of soil N2O emissions to climate change in temperate forest plantations is not yet well understood. In this study, we assessed the responses of soil N2O fluxes to experimental warming with or without water addition, using a replicated in situ heating (~2°C above ambient) and water addition (170 mm) experiment in a temperate Sitka spruce plantation forest over the period 2014–2016. We found that seasonal fluxes of N2O during the year were highly variable, ranging from net uptake to net emissions. Seasonal variations in soil N2O fluxes were not correlated with either soil temperature or soil moisture. In addition, none of the individual warming/watering treatments, or their interactions, had significant effects on soil N2O fluxes and N-related soil properties. Overall, our results suggest that despite future increases in temperature, soil N2O emission may remain largely unchanged in many temperate forest ecosystems that are often N-limited. [ABSTRACT FROM AUTHOR]

An expansion of bioenergy has been proposed to help reduce fossil-fuel greenhouse gas emissions, and short-rotation forestry (SRF) can contribute to that expansion. However, SRF plantations could also be sources of biogenic volatile organic compound (BVOC) emissions, which can impact on atmospheric air quality. In this study, emissions of isoprene and 11 monoterpenes from the branches and forest floor of hybrid aspen, Italian alder and Sitka spruce stands in an SRF field trial in central Scotland were measured during two years (2018-2019) and used to derive emission potentials for different seasons. Sitka spruce was included as a comparison as it is the most extensive plantation species in the UK. Winter and spring emissions of isoprene and monoterpenes were small compared to those in summer. Sitka spruce had a standardised average emission rate of 15 µg C g-1 h-1 for isoprene in the dry and warm summer of 2018, more than double the emissions in 2019. However, standardised average isoprene emissions from hybrid aspen were similar across both years, approximately 23 µg C g-1 h-1 and standardised average isoprene emissions from Italian alder were very low. Average standardised total monoterpene emissions for these species followed a similar pattern of higher emissions in the warmer year: Sitka spruce emitting 4.5 µg C g-1 h-1 and 2.3 µg C g-1 h-1 for 2018 and 2019, aspen emitting 0.3 µg C g-1 h-1 and 0.09 µg C g-1 h-1 and Italian alder emitting, 1.5 µg C g-1 h-1 and 0.2 µg C g-1 h-1, respectively. In contrast to these foliage emissions, the forest floor was only a small source of monoterpenes, typically one or two orders of magnitude lower than foliage emissions on a unit ground area basis. Estimates of total annual emissions from each plantation type per hectare were derived using the MEGAN 2.1 model. The modelled total BVOC (isoprene and monoterpenes) emissions of SRF hybrid aspen plantations were approximately half those of Sitka spruce for plantations of the same age. Italian alder SRF emissions were 20 times smaller than from Sitka spruce. The expansion of bioenergy plantations to 0.7 Mha has been suggested for the UK to help achieve net-zero greenhouse gas emissions by 2050. The model estimates show that with such an expansion total UK BVOC emissions would increase between < 1 % and 35 %, depending on the tree species planted. Where increases might be small on a national scale, regional increases might have a larger impact on local air quality. [ABSTRACT FROM AUTHOR]

Sitka spruce wood samples were subjected to different conditions of hydro-thermal treatment by varying the relative humidity (RH) and period of exposure at a constant temperature of 120 °C. Near infrared (NIR) spectroscopy, principal component analysis (PCA) and two dimensional correlation spectroscopy (2D-COS) were employed to examine the structural changes which occur in the wood samples during the applied treatment conditions and to quantify the differences between non-extracted and water-extracted wood specimens after the treatment. Modifications were dependent on the amount of water molecules present the medium and also on treatment time. Higher variations were observed for samples treated at higher RH values and for longer periods. At the same time, it was also observed that during the hydro-thermal treatment a high amount of extractives remain in the wood structure, extractives which vary in quantity and composition. PCA and 2D-COS made it possible to discriminate modifications in the wood samples according to treatment time and relative humidity. Non-extracted and water-extracted samples were also examined to identify the sequential order of band modification.

Plant mitochondrial genomes vary widely in size. Although many plant mitochondrial genomes have been sequenced and assembled, the vast majority are of angiosperms, and few are of gymnosperms. Most plant mitochondrial genomes are smaller than a megabase, with a few notable exceptions. We have sequenced and assembled the complete 5.5-Mb mitochondrial genome of Sitka spruce (Picea sitchensis), to date, one of the largest mitochondrial genomes of a gymnosperm. We sequenced the whole genome using Oxford Nanopore MinION, and then identified contigs of mitochondrial origin assembled from these long reads based on sequence homology to the white spruce mitochondrial genome. The assembly graph shows a multipartite genome structure, composed of one smaller 168-kb circular segment of DNA, and a larger 5.4-Mb single component with a branching structure. The assembly graph gives insight into a putative complex physical genome structure, and its branching points may represent active sites of recombination. [ABSTRACT FROM AUTHOR]

Six experiments were established between 1955 and 1962 in different parts of northern and western Britain which used replicated randomized block designs to compare the performance of two species 50:50 mixtures with pure stands of the component species. The species involved were variously lodgepole pine (Pinus contorta Dougl.), Japanese larch (Larix kaempferi Lamb. Carr.), Scots pine (Pinus sylvestris L.), silver birch (Betula pendula Roth.), Sitka spruce (Picea sitchensis Bong. Carr.) and western hemlock (Tsuga heterophylla Raf. Sarg.). The first four species are light demanding, while Sitka spruce is of intermediate shade tolerance and western hemlock is very shade tolerant: only Scots pine and silver birch are native to Great Britain. In three experiments (Bickley, Ceannacroc, Hambleton), the mixtures were of two light-demanding species, while at the other three sites, the mixture tested contained species of different shade tolerance. The experiments were followed for around 50 years, similar to a full rotation of even-aged conifer stands in Britain. Five experiments showed a tendency for one species to dominate in mixture, possibly reflecting differences in the shade tolerance or other functional traits of the component species. In the three experiments, the basal area of the mixtures at the last assessment was significantly higher than predicted based on the performance of the pure stands (i.e. the mixture 'overyielded'). In two of these cases, the mixture had had a higher basal area than found in the more productive pure stand indicating 'transgressive overyielding'. Significant basal area differences were generally more evident at the later assessment date. The exception was in a Scots pine: western hemlock mixture where greater overyielding at the earlier date indicated a nursing ('facilitation') effect. In the remaining experiments, the performance of the mixture conformed to predictions from the growth of the component species in pure stands. Taken overall, the results suggest that functional traits can be used to interpret the performance of mixtures but prediction of the outcome will require better understanding of the interplay between species and site characteristics plus the influence of silvicultural interventions. [ABSTRACT FROM AUTHOR]

Context: Western Olympic valley bottoms, disturbed by alluvial processes, are dominated by Picea sitchensis and isolated cohorts of Pseudotsuga menziesii, while upland contexts, disturbed by wind and fire, are dominated by P. menziesii. These forests have distinct structure and produce large trees with habitat for endangered birds. Objectives: Describe how disturbance and forest development create landscape forest patterns and distribution of large trees in valley bottom and upland forests. Methods: LiDAR data of ~ 9700 ha within Olympic National Park, USA was classified based on vegetation height and percent cover to contrast valley bottom and upland forests. Within-crown structure from 36 P. sitchensis and 12 P. menziesii was then used to predict locations of the largest and most complex trees. Results: Valley bottoms comprise small patches of dense tall (11%), medium-height trees (19%), and gaps (7%) embedded in open-canopy forest with scattered tall trees (63%). Upland forests comprise larger patches of tall (16%), medium (58%), and open-canopy forest (25%) with few gaps (1%). The largest trees are more abundant in valley bottoms (0.05 tree ha−1) than upland (0.02 tree ha−1) due to small patches of tall trees within open-canopy forest. Conclusions: Alluvial disturbance, fungi-wind interaction, and dominance of late-successional fast-growing P. sitchensis create open-canopy forest with more large trees, while severe fire and wind interacting with P. menziesii create patchy closed-canopy forest with fewer large trees. Management for large habitat trees should use aggregated retention with P. menziesii, multi-aged selection techniques with P. sitchensis, and indefinitely retain a low density of large trees. [ABSTRACT FROM AUTHOR]

The impact of historical and present drivers on biodiversity, particularly species richness and abundance, in afforestation areas concerning non-native tree species is still poorly understood. A better understanding is important to ensure appropriate forest management in the face of climate change and increasing demand for wood products. Here, we have reviewed 75 biodiversity studies in Sitka spruce plantations in NW Europe, forest management recommendations for maintaining biodiversity, timber production and carbon sequestration in Sitka spruce forests in coastal Norway compared to NW Europe. Due to more focus on non-market landscape benefits and protection sites in coastal areas, transformation of spruce plantations is common. Premature cutting of stands and shelterbelts and clearing away saplings has become the dominant management practice in Norway. Based on the extent of use in Norway, and results from biodiversity studies in Sitka spruce plantations in NW Europe, the quality of evidence for the prevailing practice and recommendations in coastal Norway is highly questioned. To reduce conflicts, we propose a more knowledge-based management, a broader perspective underpinning the range of afforestation goals, also including the use of alternative silvicultural methods to increase structural variation in Sitka spruce stands. [ABSTRACT FROM AUTHOR]

Six tree species were examined using ¹H NMR spectroscopy of sap extracted by supercritical CO2. A metabolomic approach was developed to evaluate the sap extracted from sapwood of Norway spruce (Picea abies), Sitka spruce (Picea sitchensis), radiata pine (Pinus radiata), macrocarpa (Cupressus macrocarpa), and two Eucalyptus species— shining gum and mountain ash (Eucalyptus nitens and Eucalyptus regnans. The sap extraction patterns in the different species were visualised using 1H magnetic resonance imaging. In softwoods with distinct annual rings, water was first removed from the latewood bands, and then gradually from the earlywood bands. In the case of the hardwood species an almost random water redistribution, rather than water expulsion, was observed. Analysis of the principal component analysis loading plots showed that the significant differences in the sap between each species were due to the carbohydrate region. Key discriminators were identified as pinitol, sucrose, glucose, and fructose. [ABSTRACT FROM AUTHOR]

In tall conifers, leaf structure can vary dramatically with height due to decreasing water potential (Ψ) and increasing light availability. This variation in leaf structure can have physiological consequences such as increased respiratory costs, reduced internal carbon dioxide conductance rates and ultimately reduced maximum photosynthetic rates (A max). In Picea sitchensis (Bong.) Carrière, the leaf structure varies along the vertical gradient in ways that suggest compensatory changes to enhance photosynthesis, and this variation seems to be driven largely by light availability rather than by Ψ. These trends in leaf structure coupled with remarkably fast growth rates and dependence on moist environments inspire two important questions about P. sitchensis : (i) does foliar water uptake minimize the adverse effects of decreasing Ψ with height on leaf structure, and (ii) do trends in leaf structure increase photosynthetic rates despite increasing height? To answer these questions, we measured foliar water uptake capacity, predawn (Ψpd) and midday water potential and gas-exchange rates as they varied between 25- and 89-m heights in 300-year-old P. sitchensis trees in northwestern California. Our major findings for P. sitchensis include the following: (i) foliar water uptake capacity was quite high relative to published values for other woody species; (ii) foliar water uptake capacity increased between the crown base and treetop; (iii) wet season Ψpd was higher than predicted by the gravitational potential gradient, indicating foliar water uptake; and (iv) the maximum photosynthetic rate increased with height, presumably due to shifts in leaf structure between the crown base and treetop, mitigating height-related decreases in A max. These findings suggest that together, the use of fog, dew and rain deposits on leaves and shifts in the leaf structure to conserve and possibly enhance photosynthetic capacity likely contribute to the rapid growth rates measured in this species. [ABSTRACT FROM AUTHOR]

Temperate rainforest soils of the Pacific Northwest are often carbon (C) rich and encompass a wide range of fertility, reflecting varying nitrogen (N) and phosphorus (P) availability. Soil resource stoichiometry (C : N : P) may provide an effective measure of site nutrient status and help refine species-dependent patterns in forest productivity across edaphic gradients. We determined mineral soil and forest floor nutrient concentrations across very wet (perhumid) rainforest sites of southwestern Vancouver Island (Canada) and employed soil element ratios as covariates in a long-term planting density trial to test their utility in defining basal area growth response of four conifer species. There were strong positive correlations in mineral soil C, N, and organic P (P o) concentrations and close alignment in C : N and C : P o both among and between substrates. Stand basal area after 5 decades was best reflected by mineral soil and forest floor C : N, but in either case included a significant species–soil interaction. The conifers with ectomycorrhizal fungi had diverging growth responses displaying either competitive (Picea sitchensis) or stress-tolerant (Tsuga heterophylla , Pseudotsuga menziesii) attributes, in contrast to a more generalist response by an arbuscular mycorrhizal tree (Thuja plicata). Despite the consistent patterns in organic matter quality, we found no evidence for increased foliar P concentrations with declining element ratios (C : P o or C : P total) as we did for N. The often high C : P o ratios (as much as 3000) of these soils may reflect a stronger immobilization sink for P than N, which, along with ongoing sorption of PO4- , could limit the utility of C : P o or N : P o to adequately reflect P supply. The dynamics and availability of soil P to trees, particularly as P o , deserves greater attention, as many perhumid rainforests were co-limited by N and P, or, in some stands, possibly P alone. [ABSTRACT FROM AUTHOR]

We present a new method to estimate individual knot volumes based on a knot geometry model coupled with observations on branch characteristics. X-ray computer tomography and image analysis were used to measure the volume and geometry of 424 knots of Sitka spruce (Picea sitchensis (Bong.) Carrière). Knot geometry can be described mathematically by deriving functions for relative vertical position, diameter, and slope dependent on radial position in the stem. These functions were parameterized using "seemingly unrelated regression" and mixed-modelling techniques. This provided a base model for typical knots. To estimate individual knot volume, we used available data for branch diameter and insertion angle to obtain conditional predictions. We imputed the most likely knot trajectory, as relative vertical position cannot be measured on branches. The model explained up to 96% of the variability in knot volume by incorporating the branch measurements, in contrast to the 43% explained using the typical knot model. Knot volume assessment based only on conditional predictions of diameter and marginal predictions of vertical position also accounted for 96% of the variability. Therefore, measurements of branch diameter alone would be enough to obtain highly precise predictions of individual knot volume. This estimator is a first step towards a knot model to be used for the management of Sitka spruce in Great Britain. [ABSTRACT FROM AUTHOR]

In southeast Alaska, United States, multiple-use forest management objectives include both timber production and wildlife habitat. Following stand-replacing disturbances such as clear-cutting, Sitka spruce (Picea sitchensis (Bong.) Carrière) and western hemlock (Tsuga heterophylla (Raf.) Sarg.) naturally regenerate and competitively dominate resources, excluding understory biomass and biodiversity. Thinning may mitigate the effects of canopy closure and permit understory development, but evidence of the effect on understories 8–10 years after thinning is lacking. We report results 4–5 and 8–10 years after thinning experiments on the Tongass National Forest to demonstrate the effects of precommercial thinning (thinned versus control), stand age (15–25, 25–35, and 35–50 years), and weather on understory dynamics and Sitka black-tailed deer (Odocoileus hemionus sitkensis Merriam, 1898) forage availability. Stand density negatively affected understory biomass, whereas temperature and precipitation positively interacted to increase biomass. Thinning had an enduring effect on understories, with biomass at least twice as great in thinned versus unthinned stands through year 10. We identified compositional differences from thinning as stand age class increased. Deer forage responded similarly to biomass, but thinning-induced differences faded with increased winter snowfall scenarios, especially in older stands. This study aids the understanding of stand overstory and understory development following silvicultural treatments in the coastal temperate rain forest of Alaska and suggests management implications and applications for balancing objectives throughout the forest type. [ABSTRACT FROM AUTHOR]

The feasibility of Sitka spruce and birch mixtures on nutritionally impoverished sites was investigated based on experimental data and single tree growth model simulations. The Kronoberg silvicultural approach was considered as a management option, which is traditionally applied to naturally regenerating birch and Norway spruce sites with two major economic objectives: bioenergy production from the initial thinning of birch, and production of good quality spruce sawlog at clearfell. The silvicultural system was tested using field data from planted mixed species trials to initialise model simulations under three proposed scenarios a) a no thin pure Sitka spruce stand (SS-NT), b) a 50:50 birch/Sitka spruce mixture under a no thin silvicultural scenario (M-NT) and c) the Kronoberg management approach (KM) adapted for planted birch/ spruce mixtures. Analysis of simulated harvest and growth data suggest that gradual removal of birch from the mixed stands is required to maximise timber volume production of Sitka spruce. Economic analysis shows that the SS-NT and M-NT scenarios, where stands are clearfelled at 40 years or earlier, for bioenergy or timber sale, may not be commercially viable, based on net present value (NPV) using discount rates above 2%. The KM approach yielded positive NPV returns at discount rates of 3 to 6%. The potential use of this alternative silvicultural system for nutritionally poor sites Dublin 4. requires further field testing to validate model simulations and economic assumptions used in the study. [ABSTRACT FROM AUTHOR]

Palynological and sedimentological analyses of lacustrine cores from Baker Island, located in southeastern Alaska's Alexander Archipelago, indicate that the beginning of the Younger Dryas chronozone, between approximately 12,900 cal yr BP and approximately 12,600 cal yr BP, was cooler and drier than modern conditions, based on decreases in the percentages of Pinus (pine) and Tsuga mertensiana (mountain hemlock) pollen accompanied by increases in Alnus (alder) pollen and fern spores. This initial cool period, lasting only 300 years, was relatively mild compared to the North Atlantic region, with an estimated temperature reduction of approximately 2°C from modern. Further, there is no sedimentological evidence of glaciation within the lake basin during this time interval. A subsequent increase in the percentages of Pinus and Picea cf. sitchensis (Sitka spruce) indicates that conditions ameliorated during the latter portion of the YD, between approximately 12,600 cal yr BP and approximately 11,700 cal yr BP. [ABSTRACT FROM AUTHOR]

Sitka spruce wood samples were subjected to different conditions of hydrothermal treatment at 140°C by varying the relative humidity and period of exposure. The control/reference and treated wood samples were evaluated using near infrared spectroscopy (NIRS), principal component analysis (PCA) and two dimensional correlation spectroscopy (2DCOS) in order to identify the structural modifications appearing during the treatment. Following this, the changes were reflected by the shifting of the bands position, modifications in bands intensities and width, as well as baseline offset. Higher modifications were identified in the 7400-6000 and 5100-4100 cm-1 regions assigned mainly to hemicelluloses and extractives, indicating that these components were the most susceptible to degradation in the present treatment conditions. Further, by PCA was possible to differentiate the modifications in the wood samples according to the time of treatment and relative humidity, while by 2DCOS was possible to identify the sequential order of modifications. [ABSTRACT FROM AUTHOR]

Research on the mechanical and physical properties of wood is commonly carried out on either small clear specimens or structural-sized boards. The first approach was more frequently utilized in the past, while the latter is more commonly used nowadays. However, there is very little information on how the two approaches relate with one another. This study aimed to quantify the relationships between the mechanical [modulus of elasticity (MOE) and bending strength] and physical properties (density) of both specimen sizes. A total of 1376 structural-sized boards from three different species (Douglas-fir, Norway spruce and Sitka spruce) were tested in bending, after which a small clear specimen was extracted from the undamaged portion of each board and re-tested in bending. Prior to destructive testing, all boards and clear specimens were evaluated using non-destructive technology. Poor-to-moderate relationships were found between all measured mechanical and physical properties of structural-sized timber and small clear specimens. In both specimen sizes, the properties correlated with one another within the same specimen size, as well as across the two sizes. The strength of correlations appears to be somewhat species dependent. Relatively good relationships were identified when comparing the mean tree values of the properties examined, suggesting either method can be used for a tree-level comparison. The non-destructive evaluation of specimens was shown to reflect the measured properties moderately well, with the relationships changing significantly depending on which measured property was being predicted. [ABSTRACT FROM AUTHOR]

This study was conducted to quantify growth responses of three major commercial conifer species (lodgepole pine (Pinus contorta Douglas ex Loudon var. latifolia Engelm. ex S. Watson), interior Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco var. glauca (Beissn.) Franco), and spruce (white spruce (Picea glauca (Moench) Voss) and hybrid spruce (Picea engelmannii Parry ex. Engelm. × Picea glauca (Moench) Voss × Picea sitchensis (Bong.) Carrière))) to various fertilizer blends in interior British Columbia, Canada. Over 25 years, growth-response data were repeatedly collected across 46 installations. The fertilizer blends were classified into three groups: nitrogen only; nitrogen and sulfur combined; and nitrogen, sulfur, and boron combined. The growth responses for stand volume, basal area, and top height were calculated through absolute and relative growth rate ratios relative to a controlled group. Fertilizer blend, inverse years since fertilization, site index, stand density at fertilization, and their interactions with the fertilizer blend were used as explanatory variables. The magnitude and significance of volume and basal area growth responses to fertilization differed by species, fertilizer-blend groups, and stand-condition variables (i.e., site index and stand density). In contrast, the response in top height growth did not differ among fertilization blends, with the exception of the nitrogen and sulfur fertilizer subgroup for lodgepole pine. The models developed in this study will be incorporated into the current growth and yield fertilization module (i.e., Table Interpolation Program for Stand Yields (TIPSY)), thereby supporting guidance of fertilization applications in interior forests in British Columbia. [ABSTRACT FROM AUTHOR]

Longitudinal and flexural vibration tests were conducted using open-hole Sitka spruce specimens, and the effects of the size and location of the open hole on the measurement of the nominal Young's modulus and nominal shear modulus were investigated. The nominal elastic moduli often decreased as the size of the open hole increased, and the hole was located close to the mid-length of the specimen. However, the decreasing tendencies were characterised according to the direction along which the vibration was excited. To consider these phenomena, an empirical equation for deriving the nominal elastic modulus corresponding to the size and location of the open hole is proposed. The effects of the open hole were appropriately predicted using the proposed equation. [ABSTRACT FROM AUTHOR]

The management of non-native tree species in European forests has a long history, but the information on the current number and geographic distribution of these species in European forests is incomplete and scattered across various datasets. This study aims to perform an inventory of the most frequent non-native tree species growing in European forests and analyse their current extent, geographic distribution and geographic origin. Our results show that at least 150 non-native tree species are currently growing in European forests and provenance trials. The genera represented by largest number of species are Eucalyptus, Pinus, Acacia and Abies. Species growing at the largest areas are Robinia pseudoacacia (2.44 million ha), Eucalyptus globulus (1.46 million ha), Picea sitchensis (1.16 million ha) and Pseudotsuga menziesii (0.83 million ha). In total, non-native tree species in Europe are found in an area of approximately 8.54 million ha, or 4.0% of the European forest area, and the five most abundant species account for up to 77% of this area. The largest number of these 150 species were introduced from North America (71), followed by Asia (45) and Australia (20). North American species occupy by far the largest area. [ABSTRACT FROM AUTHOR]

Temperate rainforest soils of the Pacific Northwest are often carbon (C) rich and encompass a wide range in fertility reflecting varying nitrogen (N) and phosphorus (P) availability. Soil resource stoichiometry (C : N : P) may provide an effective measure of site nutrient status and help refine species-dependent patterns in forest productivity across edaphic gradients. We described the nature of soil organic matter for mineral soil and forest floor substrates across very wet (perhumid) rainforest sites of southwestern Vancouver Island (Canada), and employed soil element ratios as covariates in a long-term planting density trial to test their utility in defining basal area growth response of four conifer species. There were strong positive correlations in mineral soil C, N and organic P (Po) concentrations, and close alignment in C : N and C : Po both among and between substrates. Stand basal area after five decades was best reflected by soil C : N but included a significant species-soil interaction. The conifers with ectomycorrhizal fungi had diverging growth responses displaying either competitive (Picea sitchensis) or stress-tolerant (Tsuga heterophylla, Pseudotsuga menziesii) attributes, in contrast to a more generalist response by an arbuscular mycorrhizal tree (Thuja plicata). Despite the consistent patterns in organic matter quality we found no evidence via foliar nutrition for increased P availability with declining element ratios as we did for N. The often high C : Po ratios (as much as 3000) of these soils may reflect a stronger immobilization sink for P than N, which, along with ongoing sorption of PO4-, could limit the utility of C : Po or N : Po to adequately reflect P supply. The dynamics and availability of soil P to trees, particularly as Po, deserves greater attention as many perhumid rainforests were co-limited by N and P, or, in some stands, possibly P alone. [ABSTRACT FROM AUTHOR]

• Multivariate optimisation and statistical analyses were conducted on scaffold boards. • Effects of the selected wood defects on the performance of boards were investigated. • 0.3 TKAR and 0.1–0.17 MKAR were determined as the most critical values. • Failure is independent from knot defects for the low density and growth rate boards. The uncertainties involved in the prediction of scaffold material performance in the machine grading process have brought forth the necessity to identify the level of influence of wood defects on the scaffold performance required to be optimised for its intended use as a construction material. This paper tackled this important aspect by employing multivariate optimisation and statistical analyses on the previously reported experimental results in the literature on the machine graded scaffold boards from UK Sitka spruce (picea sitchensis) softwoods. Initially, nonlinear multivariate regression analyses were performed for the responses of such variables as failure load, displacement, extreme fibre stress and the critical failure distance to several wood characteristics as contributing factors. The extension of the statistical analysis to the multi-objective optimisation study was accomplished using Response Surface Method (RSM) by considering the mutual interactions between the factors including total and margin knot area ratios, density, rate of growth and slope of grain. This paper represented graphically how the load bearing capacity, the deformation characteristics and the critical failure location points are influenced by the considered factors. The significance of factors and their relative influence on the performance optimisation were finally discussed by providing the essential information on the future use of scaffold board products as construction material. [ABSTRACT FROM AUTHOR]

• CSMatrix-AK model enables projections of coastal Alaska forests under climate change. • Stochastic disturbances are expected to lower total stand basal areas. • Sitka spruce is expected to be replaced by boreal spruce species. • Stakeholders in the region need to prepare for these significant changes. Coastal Alaska forests consist of 2.6 million hectares of productive timberland and constitute the largest terrestrial carbon reservoir in the state. It has become increasingly urgent to understand potential climate-induced changes in forest structural and species composition in this region. Based on in situ data from 544 permanent sample plots (PSPs) for calibration and 244 PSPs for validation, we developed a climate-sensitive density-dependent, species-, and size-specific matrix model (CSMatrix-AK), to predict fine-scale dynamics of coastal Alaska forests from the present to Year 2100 under three climate scenarios – Representative Concentration Pathway (RCP) 4.5, RCP6.0, and RCP8.5. With post-sample validation, we showed that the CSMatrix-AK model was more accurate than other existing models for the region. Under low-intensity and high-frequency stochastic shocks which represented natural disturbances typical for the region, we projected a gradual decline of Sitka spruce, a major commercial species in the region, and a significantly lower level of total stand basal area under all three climate scenarios. The results suggest that timber industry, landowners and managers, policymakers, and local communities will need to prepare for substantial impacts of climate change on Coastal Alaska forests and the regional forestry sector. Our CSMatrix-AK model provides a useful tool to better inform the stakeholders of such changes and lays the foundation for adaptive forest management to sustain forests and associated ecosystem services in the region. [ABSTRACT FROM AUTHOR]

Coastal watersheds of the North Pacific benefit immensely from bear-mediated uploading of salmon nutrients, which increases aquatic and terrestrial productivity. To quantify the influence of spawning salmon on tree-ring signatures, we analyzed 543 rings from the heartwood of 13 old-growth Sitka spruce (Picea sitchensis (Bong.) Carrière) trees from five geographically separated watersheds in coastal British Columbia. In comparison with adjacent control trees, those receiving salmon nutrients (salmon trees) have rings that are, on average, 1.5 mm wider, 4.5‰ more enriched in isotopic nitrogen, and 0.021% more elevated in total nitrogen (P < 0.001, Mann–Whitney–Wilcoxon test). In this study, salmon nutrients enhance average stem growth by 19%. Furthermore, salmon trees show that increases in tree-ring width and nitrogen values lag sporadic, high salmon runs by 0 to 5 years. Using differences between control and salmon trees from the same site, our results collectively indicate that tree-ring width, isotopic nitrogen, and total nitrogen are valid, complementary tools for investigating historic, annual fluctuations in salmon abundance in coastal watersheds. We recommend their use in future, tree ring based reconstructions of past nutrient cycling over decadal to centennial time scales. [ABSTRACT FROM AUTHOR]

The hemlock looper, Lambdina fiscellaria (Guenée), is a serious forest pest in North America with three subspecies that vary in their geographical range and larval host preferences. Both broadleaved and coniferous trees are infested, though the largest impacts are on coniferous forestry where trees can be completely defoliated and killed. The pest was identified as a potential threat to forestry on the island of Ireland during a horizon‐scanning exercise to identify pests of Picea sitchensis (Bong.) Carr. (Sitka spruce) and was subject to a rapid pest risk analysis (PRA). Though judged to be unlikely, pathways identified were uncontrolled wood commodities and mosses and lichens harvested from forests in North America and exported for use in ornamental displays. Lambdina fiscellaria is found in a range of climate types, and is likely to be able to complete its lifecycle in the Irish climate – although there is uncertainty concerning its ability to adapt to European trees. Lambdina fiscellaria has only a limited capacity for spread, as virgin females are burdened by their eggs and are poor fliers. This was judged to reduce potential impacts in the PRA area – as the slow rate of spread would provide time to develop monitoring and control methods well ahead of the pest reaching its maximum extent on the island of Ireland. The pest still poses a considerable risk to coniferous forestry not only on the island of Ireland but across the EPPO region where climate is suitable for the pest to establish. Regulation and implementation of phytosanitary measures prevent introduction of the pest should be considered. [ABSTRACT FROM AUTHOR]

The rates and biological significance of somatic mutations have long been a subject of debate. Somatic mutations in plants are expected to accumulate with vegetative growth and time, yet rates of somatic mutations are unknown for conifers, which can reach exceptional sizes and ages. We investigated somatic mutation rates in the conifer Sitka spruce (Picea sitchensis (Bong.) Carr.) by analyzing a total of 276 Gb of nuclear DNA from the tops and bottoms of 20 old‐growth trees averaging 76 m in height. We estimate a somatic base substitution rate of 2.7 × 10−8 per base pair within a generation. To date, this is one of the highest estimated per‐generation rates of mutation among eukaryotes, indicating that somatic mutations contribute substantially to the total per‐generation mutation rate in conifers. Nevertheless, as the sampled trees are centuries old, the per‐year rate is low in comparison with nontree taxa. We argue that although somatic mutations raise genetic load in conifers, they generate important genetic variation and enable selection both among cell lineages within individual trees and among offspring. [ABSTRACT FROM AUTHOR]