Search

The present study aimed to evaluate the accuracy of digitally designed surgical splints generated with milling technology (material subtractive procedure) and with 3D printing technology (material additive procedure) through a customized approach in the planning of surgical orthognathic splints. Cone beam computed tomography (CBCT) examinations and scanned dental models of 10 subjects who had required surgical treatment of skeletal malocclusion were included. Simulation of the orthognathic surgery was performed according to dento-skeletal and aesthetic characteristics of the subjects and the visual treatment objective (VTO), using Dolphin3D software (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). Afterward, the Appliance Designer software (3Shape A/S, Copenhagen, Denmark) was used to digitally design the surgical splints that were generated twice using laser stereolithography technology (DWS 0.29D, DWS, Vicenza, Italy) and milling technology (Sirona inLab MC X5). Finally, each physical splint was digitalized using a desktop scanner (D500 3D, 3Shape A/S, Copenhagen, Denmark) in order to perform deviation analysis using the original project as a reference. The relative percentage of matching (trueness) was calculated (Geomagic Control X software (3D Systems, version 2018.1.1, 3D Systems, Rock Hill, SC, USA). An Independent Student's t -test was used to statistically analyze the data. The milled splints showed a lower value of root to mean square (RMS) relative to the original project (0.20 mm ± 0.018) compared to the prototyped splints (0.31 ± 0.021) ( p < 0.001). According to the present findings, surgical splints generated with milling technology present higher trueness compared with 3D printing technology.

Introduction: Clinical studies have shown significant improvements in exercise capacity in patients with chronic obstructive pulmonary disease (COPD) who are treated with a tiotropium/olodaterol fixed-dose combination (FDC). However, the effects of this treatment, which is administered in a single device, on physical functioning in a real-life setting of patients with COPD had not been fully determined., Methods: An open-label, observational study was conducted in 309 patients with COPD from 29 sites across Italy who received tiotropium/olodaterol FDC for 6 weeks. Physical functioning was evaluated using the Physical Functioning Questionnaire (PF-10). The primary endpoint was the proportion of patients with therapeutic success, defined as a ten-point increase in the PF-10 score from the baseline visit. Secondary endpoints were absolute changes in PF-10 score from baseline visit, the patient's general condition assessed by the Physician's Global Evaluation (PGE) score, and patient satisfaction with treatment, inhaling and handling of the device., Results: According to the Global Initiative for Chronic Obstructive Lung Disease (GOLD) multimodality assessment, most patients were allocated to groups B (44.4%) and D (24.5%). Comorbidities were present in 73.9% of the patients. The primary endpoint was reached in more than half of the patients (52.5%), especially in groups B and D of GOLD. Patients' satisfaction with treatment, inhaling and handling of device was high, with a range of more than 86% to more than 89%, and very high in both groups B and D. The rates of drug-related adverse events were very low., Conclusions: This real-life study showed that the tiotropium/olodaterol FDC treatment delivered via the Respimat device improves physical functioning and general patients' condition and is associated with a high degree of satisfaction and very low rates of drug-related adverse events, regardless of the group they belong to and their comorbidities., Clinical Trial Id: NCT03003494.

Objective: To assess and compare volumetric and shape changes of the orbital cavity in patients treated with tooth-borne (TB) and bone-borne (BB) rapid maxillary expansion (RME)., Study Design: Forty adolescents with bilateral maxillary cross-bite received tooth-borne (TB group = 20; mean age 14.27 ± 1.36 years) or bone-borne (BB group = 20; mean age of 14.62 ± 1.45 years) maxillary expander. Cone-beam computed tomography (CBCT) were taken before treatment (T1) and 6-month after the expander activation (T2). Volumetric and shape changes of orbital cavities were detected by referring to a specific 3D digital technology involving deviation analysis of T1/T2 CBCT-derived models of pulp chamber. Student's t tests were used to 1) compare T1 and T2 volumes of orbital cavities in TB and BB groups, 2) compare volumetric changes and the percentage of matching of 3D orbital models (T1-T2) between the two groups., Results: Both TB and BB groups showed a slight increase of the orbital volume (0.64 cm 3 and 0.77 cm 3 ) (p < 0.0001). This increment were significant between the two groups (p < 0.05) while no differences were found in the percentage of matching of T1/T2 orbital 3D models (p > 0.05). The areas of greater changes were detected in the proximity of the frontozygomatic and frontomaxillary sutures., Conclusion: TB-RME and BB-RME would not seem to considerably affect the anatomy or the volume of the orbital cavity in adolescents.

Objectives: To assess and compare spontaneous expansion of mandibular posterior teeth between tooth-borne (TB) and bone-borne (BB) rapid maxillary expansion (RME)., Materials and Methods: This study included 36 adolescents with bilateral maxillary crossbite receiving tooth-borne (average age: 14.4 ± 1.3 years) or bone-borne (average age: 14.7 ± 1.4 years) maxillary expansion. Cone beam computed tomography was acquired before expansion (T1) and after 6 months' retention (T2). Specific linear and angular measurements were performed in the coronal view to assess buccal inclinations and widths of mandibular posterior units. All data were statistically analyzed., Results: In both groups there was a significant increase in buccal-lingual inclination of mandibular posterior teeth ranging from 1.67° to 2.30° in the TB group and from 1.46° to 2.11° in BB group. Mandibular posterior widths showed an increase ranging from 0.80 mm to 1.33 mm in TB group and from 0.64 mm to 0.96 mm in the BB group. No differences between groups were found for linear or angular measurements., Conclusions: A clinically significant gain of space in the mandibular arch should not be expected after RME., (© 2020 by The EH Angle Education and Research Foundation, Inc.)

Background: Maxillary transverse discrepancy is often diagnosed in childhood. The evaluation of morphological characteristics of the maxilla is crucial for appropriate treatment of this condition, however conventional diagnostic method is based on visual inspection and transversal linear parameters. In this paper, we described a user-friendly diagnostic digital workflow based on the surface-to-surface analysis. We also described a case report., Case Report: A 6-year-old female patient presenting mild transversal maxillary deficiency associated with functional posterior crossbite was treated by using maxillary removable appliance. In this respect, the appliance was designed in accordance to the morphological characteristics of the maxilla obtained by using the diagnostic digital work-flow and the maxillary surface-to-surface analysis., Conclusion: The present user-friendly diagnostic digital workflow based on surface-to-surface analysis helps clinicians to detect specific morphological characteristics of the maxilla, such as shape and area of asymmetry, in order to reach a comprehensive diagnosis and choose the correct biomechanics for treating the condition.

The aim of this study was to assess the accuracy of 3D rendering of the mandibular condylar region obtained from different semi-automatic segmentation methodology. A total of 10 Cone beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of the condyles by using three free-source software (Invesalius, version 3.0.0, Centro de Tecnologia da Informação Renato Archer, Campinas, SP, Brazil; ITK-Snap, version2.2.0; Slicer 3D, version 4.10.2) and one commercially available software Dolphin 3D (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). The same models were also manually segmented (Mimics, version 17.01, Materialise, Leuven, Belgium) and set as ground truth. The accuracy of semi-automatic segmentation was evaluated by (1) comparing the volume of each semi-automatic 3D rendered condylar model with that obtained with manual segmentation, (2) deviation analysis of each 3D rendered mandibular models with those obtained from manual segmentation. No significant differences were found in the volumetric dimensions of the condylar models among the tested software ( p > 0.05). However, the color-coded map showed underestimation of the condylar models obtained with ITK-Snap and Slicer 3D, and overestimation with Dolphin 3D and Invesalius. Excellent reliability was found for both intra-observer and inter-observer readings. Despite the excellent reliability, the present findings suggest that data of condylar morphology obtained with semi-automatic segmentation should be taken with caution when an accurate definition of condylar boundaries is required.

The accuracy of 3D reconstructions of the craniomaxillofacial region using cone beam computed tomography (CBCT) is important for the morphological evaluation of specific anatomical structures. Moreover, an accurate segmentation process is fundamental for the physical reconstruction of the anatomy (3D printing) when a preliminary simulation of the therapy is required. In this regard, the objective of this study is to evaluate the accuracy of four different types of software for the semiautomatic segmentation of the mandibular jaw compared to manual segmentation, used as a gold standard. Twenty cone beam computed tomography (CBCT) with a manual approach (Mimics) and a semi-automatic approach (Invesalius, ITK-Snap, Dolphin 3D, Slicer 3D) were selected for the segmentation of the mandible in the present study. The accuracy of semi-automatic segmentation was evaluated: (1) by comparing the mandibular volumes obtained with semi-automatic 3D rendering and manual segmentation and (2) by deviation analysis between the two mandibular models. An analysis of variance (ANOVA) was used to evaluate differences in mandibular volumetric recordings and for a deviation analysis among the different software types used. Linear regression was also performed between manual and semi-automatic methods. No significant differences were found in the total volumes among the obtained 3D mandibular models (Mimics = 40.85 cm 3 , ITK-Snap = 40.81 cm 3 , Invesalius = 40.04 cm 3 , Dolphin 3D = 42.03 cm 3 , Slicer 3D = 40.58 cm 3 ). High correlations were found between the semi-automatic segmentation and manual segmentation approach, with R coefficients ranging from 0,960 to 0,992. According to the deviation analysis, the mandibular models obtained with ITK-Snap showed the highest matching percentage (Tolerance A = 88.44%, Tolerance B = 97.30%), while those obtained with Dolphin 3D showed the lowest matching percentage (Tolerance A = 60.01%, Tolerance B = 87.76%) ( p < 0.05). Colour-coded maps showed that the area of greatest mismatch between semi-automatic and manual segmentation was the condylar region and the region proximate to the dental roots. Despite the fact that the semi-automatic segmentation of the mandible showed, in general, high reliability and high correlation with the manual segmentation, caution should be taken when evaluating the morphological and dimensional characteristics of the condyles either on CBCT-derived digital models or physical models (3D printing).

The introduction of miniscrew-assisted rapid palatal expansion (MARPE) has widened the boundaries of orthodontic skeletal correction of maxillary transversal deficiency to late adolescence and adult patients. In this respect, Maxillary Skeletal Expander (MSE) is a particular device characterized by the engagement of four miniscrews in the palatal and nasal cortical bone layers. Thus, the availability of sufficient supporting bone and the perforation of both cortical laminas (bi-corticalism) are two mandatory parameters for mini-screw stability, especially when orthopedic forces are used. Virtual planning and construction of MSE based on cone-beam computed tomography (CBCT)-derived stereolithography (.stl) files have been recently described in the literature. In this manuscript we described: (a) a user-friendly digital workflow which can provide a predictable placement of maxillary skeletal expander (MSE) appliance according to the patient's anatomical characteristics, (b) the construction of a positional template of the MSE that allows lab technician to construct the MSE appliance in a reliable and accurate position, according to the virtual project planned by the orthodontist on the patient CBCT scans. We also described a case report of an adult female patient affected by skeletal transversal maxillary deficiency treated with MSE appliance that was projected according to the described workflow.