Search

Chitosan (CS), synthesized from chitin chemically extracted from shrimp shells, was used for the synthesis of magnetic chitosan nanoparticles (Fe 3 O 4 -CSN), which makes the adsorbent easier to separate. Fe 3 O 4 -CSN was used for the removal of toxic metals such as vanadium (V(V)) and palladium (Pd(II)) ions from aqueous solutions. Influencing factors on the adsorption process such as pH, contact time, adsorbent dosage, and agitation speed were investigated. A competitive adsorption of V(V) and Pd(II) ions for the active sites was also studied. The monolayer maximum adsorption capacities (Q m ) of 186.6 and 192.3 mg/g were obtained for V(V) and Pd(II) ions, respectively. The pseudo-second-order equation gave the best fit for the kinetic data, implying that chemisorption was the determining step. Freundlich model yielded a much better fit than the other adsorption models assessed (Langmuir, Temkin and Dubinin-Radushkevich). Thus, the adsorption of V(V) and Pd(II) ions onto Fe 3 O 4 -CSN is a combination of physical and chemical adsorption, as based on the kinetics and equilibrium study. Generally, physical adsorption is the mechanism that governs the system, while chemical adsorption is the slowest adsorption step that takes place. Thermodynamic studies displayed that the adsorption process was exothermic and spontaneous. Removal efficiencies of 99.9% for V(V) and 92.3% for Pd(II) ions were achieved, implying that Fe 3 O 4 -CSN adsorbent had an excellent ability for the removal of the metal ions from real industrial wastewaters without remarkable matrix effect. Graphical abstract ᅟ.

Despite offering many advantages over traditional rigid actuators, soft pneumatic actuators suffer from a lack of comprehensive, computationally efficient models and precise embedded control schemes without bulky flow-control valves and extensive computer hardware. In this article, we consider an inexpensive and reliable soft linear actuator, called the reverse pneumatic artificial muscle (rPAM), which consists of silicone rubber that is radially constrained by symmetrical double-helix threading. We describe analytical and numerical static models of this actuator, and compare their performance against experimental results. To study the application of rPAMs to operate underlying kinematic linkage skeletons, we consider a single degree-of-freedom revolute joint that is driven antagonistically by two of these actuators. An analytical model is then derived, and its accuracy in predicting the static joint angle as a function of input pressures is presented. Using this analytical model, we perform dynamic characterization of this system. Finally, we propose a sliding-mode controller, and a sliding mode controller augmented by a feed-forward term to modulate miniature solenoid valves that control air flow to each actuator. Experiments show that both controllers function well, while the feed-forward term improves the performance of the controller following dynamic trajectories., Competing Interests: The authors have declared that no competing interests exist.

A simple and green fluorescence detection system on the basis of the quenching effect of Cu(II) ions on the graphitic carbon nitride nanosheets (g-C 3 N 4 NS) fluorescence and recording the changes of restored fluorescence intensity upon the addition of metformin (MET) was developed for the first time. The g-C 3 N 4 NS were produced using high-temperature polymerization of melamine followed by ultrasonication-assisted liquid exfoliation. The method exhibited excellent sensitivity and accuracy toward MET with the detection as low as 3 nM and linear calibration curve in the range of 0.01-20 μM. In addition, this assay was successfully applied to the determination of MET concentration in human serum samples. It is robust and is suitable for fast, sensitive and cost effective measurement of MET in biological materials., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Extraction of bisphosphonates from biological fluids is important and time consuming step in sample preparation procedure. This paper describes a simple and green sample preparation technique for dispersive micro solid phase extraction (DMSPE) of alendronate sodium (ALS) from urine and serum samples prior to direct spectrofluorimetry (DSFL) and high performance liquid chromatography with fluorescence detection (HPLC-FLD), respectively. The DMSPE strategy is based on the selective chemisorption of ALS on zirconia nanoparticles (ZNPs) as an adsorbent followed by derivatization of the eluted analyte using o-phthalaldehyde (OPA) in the presence of 2-mercaptoethanol (2ME) at basic medium to form fluorescent species. The chemical and instrumental influencing parameters on DMSPE and measuring methods were optimized for the efficient extraction and determination of ALS. The presented methods were capable of extracting ALS from human urine and serum samples and determining over the wide ranges of 5-1000 and 5-2500 μg L -1 with limits of detection (LOD) of 1.5 and 1.4 μg L -1 for DSFL and HPLC methods, respectively. The relative recoveries for the three spiked standard levels of ALS in urine and serum samples ranged from 89.0% to 107.0%, and the intra-day relative standard deviations (%RSDs) were in the range of 2.9-7.9%., (Copyright © 2018. Published by Elsevier B.V.)

Nature employs lipids to construct nanostructured membranes that self-assemble in an aqueous environment to separate the cell interior from the exterior environment. Membrane composition changes among species and according to environmental conditions, which allows organisms to occupy a wide variety of different habitats. Lipid bilayers are phase-change materials that exhibit strong thermotropic and lyotropic phase behavior in an aqueous environment, which may also cause thermal rectification. Among different types of lipids, archaeal lipids are of great interest due to their ability to withstand extreme conditions. In this paper, nonequilibrium molecular dynamics simulations were employed to study the nanostructures and thermal properties of different archaeols and to investigate thermal rectification effects in asymmetric archaeal membranes. In particular, we are interested in understanding the role of bridged phytanyl chains and cyclopentane groups in controlling the phase transition temperature and heat flow across the membrane. Our results indicate that the bridged phytanyl chains decrease the molecular packing of lipids, whereas the existence of cyclopentane rings on the tail groups increases the molecular packing by enhancing the interactions between isoprenoid chains. We found that macrocyclic archaeols have the highest thermal conductivity, whereas macrocyclic archaeols with two cyclopentane rings have the lowest. The effect of the temperature on the variation of thermal conductivity was found to be progressive. Our results further indicate that small thermal rectification effects occur in asymmetric archaeol bilayer membranes at around 25 K temperature gradient. The calculated thermal rectification factor was around 0.09 which is in the range of rectification factor obtained experimentally for nanostructures such as carbon nanotubes (0.07). Such phenomena may be of biological significance and could also be optimized for use in various engineering applications.

The understanding of adhesive interaction at the nanoscale between functionalized nanoparticles and biological cells is of great importance to develop effective theranostic nanocarriers for targeted cancer therapy. Here, we report a combination of experimental and computational approaches to evaluate the adhesion between Triptorelin (a Luteinizing Hormone-Releasing Hormone (LHRH) agonist)-conjugated poly-(ethylene glycol) (PEG)-coated magnetite nanoparticles (Triptorelin-MNPs) and breast cells. The adhesion forces between Triptorelin-MNPs and normal/cancerous breast cells are obtained using atomic force microscopy. The corresponding work of adhesion is then estimated using Johnson-Kendall-Roberts model. Our results demonstrate that Triptorelin-MNPs have a fourteen-fold greater work of adhesion to breast cancer cells than to normal breast cells. In addition, the work of adhesion between Triptorelin-MNPs and breast cancer cells is found to be three times more than that between unmodified MNPs and breast cancer cells. Hence, the experimental observation indicates that Triptorelin ligands facilitate the specific targeting of breast cancer cells. Furthermore, molecular dynamics simulations are performed to investigate the molecular origins of the adhesive interactions. The simulations reveal that the interactions between molecules (e.g. Triptorelin and PEG) and LHRH receptors are dominated by van der Waals energies, while the interactions of these molecules with cell membrane are dominated by electrostatic interactions. Moreover, both experimental and computational results reveal that PEG serves as an effective coating that enhances adhesive interactions to breast cancer cells that over-express LHRH receptors, while reduces the adhesion to normal breast cells. Our results highlight the potential to develop Triptorelin-MNPs into tumor-specific MRI contrast agents and drug carriers., Statement of Significance: Systematic investigation of adhesive interactions between functionalized nanoparticles and cancer cells is of great importance in developing effective theranostic nanocarriers for targeted cancer therapy. Herein, we use a combination of atomic force microscopy technique and molecular dynamics simulations approach to explore the adhesive interactions at the nanoscale between Triptorelin-conjugated polyethylene glycol (PEG)-coated magnetite nanoparticles and normal/cancerous breast cells. This study characterizes and quantifies the work of adhesion, as well as adhesion forces, at the nanocarrier/cell interfaces, unravels the molecular origins of adhesive interactions and highlights the effectiveness of PEG coatings and Triptorelin ligands in the specific targeting of breast cancer cells. Our findings expand the fundamental understanding of nanoparticle/cell adhesion and provide guidelines for the design of more rational nanocarriers., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The main objective of the present paper is to introduce some features of fake/bogus conferences and some viable approaches to differentiate them from the real ones. These fake/bogus conferences introduce themselves as international conferences, which are multidisciplinary and indexed in major scientific digital libraries. Furthermore, most of the fake/bogus conference holders offer publishing the accepted papers in ISI journals and use other techniques in their advertisement e-mails.

A fluorometric method was developed for simultaneous determination of Cr(VI) and Cr(III) ions using graphitic carbon nitride nanosheets (g-C 3 N 4 NS) as a nanosized fluorescent indicator probe. The g-C 3 N 4 NS were prepared using high-temperature carbonization of melamine followed by ultrasonication-assisted liquid exfoliation. The g-C 3 N 4 NS display fluorescence with excitation/emission peaks located at 320 and 450 nm. The chromium speciation is based on the quenching of g-C 3 N 4 NS fluorescence. The total concentration of chromium is determined after oxidation of Cr(III) to Cr(VI). The Cr(III) content was then calculated by subtracting the concentration of Cr(VI) from that of total chromium. The effects of pH value, probe amount, and contact time are optimized. Under optimum conditions, calibration plots are linear in the range in the 0.01 to 100 μM chromium concentration range. The limit of detection is 3 nM for for Cr(VI). The intra- and inter-day relative standard deviations (RSD) of the assay are 3.6-7.5% and 4.1-8.5%, respectively. The indicator probe was applied to the determination of chromium species in spiked water and food samples, and recoveries were satisfactory (93.9-107.0%). Graphical abstract Graphitic carbon nitride nanosheets are synthesized by melamine carbonization and employed for Cr speciation in water and food real samples. Total Cr(VI) and Cr(VI) are assessed based on the quenching of the fluorescence of nanosheets by Cr(VI).

Given their amphiphilic nature and chemical structure, phospholipids exhibit a strong thermotropic and lyotropic phase behaviour in an aqueous environment. Around the phase transition temperature, phospholipids transform from a gel-like state to a fluid crystalline structure. In this transition, many key characteristics of the lipid bilayers such as structure and thermal properties alter. In this study, we employed atomistic simulation techniques to study the structure and underlying mechanisms of heat transfer in dipalmitoylphosphatidylcholine (DPPC) lipid bilayers around the fluid-gel phase transformation. To investigate this phenomenon, we performed non-equilibrium molecular dynamics simulations for a range of different temperature gradients. The results show that the thermal properties of the DPPC bilayer are highly dependent on the temperature gradient. Higher temperature gradients cause an increase in the thermal conductivity of the DPPC lipid bilayer. We also found that the thermal conductivity of DPPC is lowest at the transition temperature whereby one lipid leaflet is in the gel phase and the other is in the liquid crystalline phase. This is essentially related to a growth in thermal resistance between the two leaflets of lipid at the transition temperature. These results provide significant new insights into developing new thermal insulation for engineering applications., (© 2017 The Authors.)

For early-stage breast cancers mastectomy is an aggressive form of treatment. Therefore, there is a need for new treatment strategies that can enhance the use of lumpectomy by eliminating residual cancer cells with limited side effects to reduce local recurrence. Although, various radiotherapy-based methods have been developed, residual cells are found in 20-55% of the time at the first operation. Furthermore, some current treatment methods result in poor cosmesis. For the last decade, the authors have been exploring the use of polymeric composite materials in single and multi-modal implantable biomedical devices for post-operative treatment of breast cancer. In this paper, the concept and working principles of the devices, as well as selected results from experimental and numerical investigations, are presented. The results show the potential of the biomedical implants for cancer treatment.

The aim of the present paper was to introduce some online-based approaches to evaluate scientific journals and publishers and to differentiate them from the hijacked ones, regardless of their disciplines. With the advent of open-access journals, many hijacked journals and publishers have deceitfully assumed the mantle of authenticity in order to take advantage of researchers and students. Although these hijacked journals and publishers can be identified through checking their advertisement techniques and their websites, these ways do not always result in their identification. There exist certain online-based approaches, such as using Master Journal List provided by Thomson Reuters, and Scopus database, and using the DOI of a paper, to certify the realness of a journal or publisher. It is indispensable that inexperienced students and researchers know these methods so as to identify hijacked journals and publishers with a higher level of probability.

In this research, novel zirconia nanoparticles-decorated calcium alginate hydrogel fibers (ZNCAHF) were synthesized through a simple, green procedure. ZNCAHF were used as an adsorbent in the micro-solid-phase extraction (MSPE) of methyl parathion (MP), fenitrothion (FT) and malathion (MT) as model pesticides prior to gas chromatography-mass spectroscopic detection (GC-MS). The composition and morphology of the prepared fiber were characterized by Fourier transform-infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray diffraction (EDX), and differential scanning calorimetry (DSC). Various parameters affecting fabrication of the fiber (weight ratio of components) and relative extraction recovery (pH, amount of adsorbent, extraction time, salt addition, and desorption conditions) were investigated and optimized. Under optimized conditions, the calibration curves were obtained in the concentration range of 0.01-500ngmL -1 with regression coefficients between 0.9997 and 0.9999. The limits of detection (LOD) (S/N=3) and limits of quantification (LOQ) (S/N=10) of the method ranged from 0.001 to 0.004ngmL -1 and 0.003 to 0.012ngmL -1 , respectively. The intra-day and inter-day relative standard deviations (RSDs) were 2.2-5.9% and 3.2-7.8%, respectively. The applicability of the fabricated adsorbent was investigated by extraction of selected organophosphorous pesticides (OPPs) from real samples of juice and water. The obtained relative recoveries were in the range of 90.6-105.4%, demonstrating elimination of matrix effects which can be attributed to the remarkable affinity of OPPs toward ZNCAHF., (Copyright © 2016 Elsevier B.V. All rights reserved.)

An understanding of the properties of multifunctional materials is important for the design of devices for biomedical applications. In this paper, a combination of experiments and models was used to study the mechanical and hyperthermic properties of magnetic nanoparticles (MNP)-filled PDMS composites for biomedical applications. These are studied as a function of the weight of MNP, γ-Fe2O3. The results showed the effects on mechanical behavior, and specific losses in a magnetic field. The measured Young's moduli are in good agreement with the moduli predicted from the Bergström-Boybce model. Specific losses calculated from magnetic measurements are used to predict the thermal dose under in-vivo conditions. The implications of the results were discussed for potential applications in biomedical devices., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Concrete is the most used material in the world. It is also one of the most versatile yet complex materials that humans have used for construction. However, an important weakness of concrete (cement-based composites) is its low tensile properties. Therefore, over the past 30 years many studies were focused on improving its tensile properties using a variety of physical and chemical methods. One of the most successful attempts is to use polymer fibers in the structure of concrete to obtain a composite with high tensile strength and ductility. The advantages of polymer fiber as reinforcing material in concrete, both with regard to reducing environmental pollution and the positive effects on a country's economy, are beyond dispute. However, a thorough understanding of the mechanical behavior of fiber-reinforced concrete requires a knowledge of fiber/matrix interfaces at the nanoscale. In this study, a combination of atomistic simulations and experimental techniques has been used to study the nanostructure of fiber/matrix interfaces. A new model for calcium-silicate-hydrate (C-S-H)/fiber interfaces is also proposed on the basis of scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analyses. Finally, the adhesion energy between the C-S-H gel and three different polymeric fibers (poly(vinyl alcohol), nylon-6, and polypropylene) were numerically studied at the atomistic level because adhesion plays a key role in the design of ductile fiber-reinforced composites. The mechanisms of adhesion as a function of the nanostructure of fiber/matrix interfaces are further studied and discussed. It is observed that the functional group in the structure of polymer macromolecule affects the adhesion energy primarily by changing the C/S ratio of the C-S-H at the interface and by absorbing additional positive ions in the C-S-H structure.

Synthetic orthopaedic materials consisting of a single bioinert polymeric material do not meet the complex biological and physical requirements of scaffold-guided bone tissue repair and regeneration. Of particular interest is the design of biocompatible hydrogel-hydroxyapatite composite bone substitutes with outstanding interfacial adhesion that would warranty the ability for the composite to withstand functional loadings without exhibiting brittle fractures during the dynamic guided tissue regeneration. For this purpose, the hydroxylated side chain of chemically cross-linked poly (2-hydroxyethyl methacrylate) (pHEMA) is substitute with a carboxylated side chain to make poly (glycerol methacrylate) (pGLYMA). Here, we carry out atomistic simulations and atomic force microscopy to predict and experimentally determine the interfacial adhesion energies of pHEMA and pGLYMA with the surface of single-crystalline hydroxyapatite (HA) whiskers. Both experimental and numerical results showed that pGLYMA has stronger adhesion forces with HA and may be used for preparing a high-affinity polymer-HA composite. The high adhesive interactions between pGLYMA and HA were found to be due to strong electrostatic energies.

Bamboo, a fast-growing grass, has a higher strength-to-weight ratio than steel and concrete. The unique properties of bamboo come from the natural composite structure of fibers that consists mainly of cellulose microfibrils in a matrix of intertwined hemicellulose and lignin called lignin-carbohydrate complex (LCC). Here, we have used atomistic simulations to study the mechanical properties of and adhesive interactions between the materials in bamboo fibers. With this aim, we have developed molecular models of lignin, hemicellulose and LCC structures to study the elastic moduli and the adhesion energies between these materials and cellulose microfibril faces. Good agreement was observed between the simulation results and experimental data. It was also shown that the hemicellulose model has stronger mechanical properties than lignin while lignin exhibits greater tendency to adhere to cellulose microfibrils. The study suggests that the abundance of hydrogen bonds in hemicellulose chains is responsible for improving the mechanical behavior of LCC. The strong van der Waals forces between lignin molecules and cellulose microfibril is responsible for higher adhesion energy between LCC and cellulose microfibrils. We also found out that the amorphous regions of cellulose microfibrils are the weakest interfaces in bamboo fibrils. Hence, they determine the fibril strength.

Purpose: Multifunctional materials consisting of polymers and magnetic nanoparticles (MNPs) are highly sought after in the field of biomedical engineering. These materials offer new opportunities for the development of novel cancer treatment modalities that can increase the efficacy of cancer therapy. In this paper, a novel probe for multimodal cancer treatment is proposed and analyzed. The probe is essentially a cannula with two main parts: a distal heat generating tip made of a magnetic nanocomposite and a proximal insulated shaft., Methods: A description of the concept and functional operations of the probe is presented. In an effort to assess its feasibility, the authors evaluated the ability of probe tip (made of PMMA-Fe3O4 nanocomposite) to generate heat in biological tissue using alternating magnetic field (AMF) parameters (field strength and frequency) that are acceptable for human use. Heat generation by MNPs was determined using the linear response theory. The effects of Fe3O4 volume fraction on heat generation as well as treatment time on the thermal dose were studied. The finite element method model was tested for its validity using an analytical model., Results: Lesions were revealed to have an ellipsoidal shape and their sizes were affected by treatment time. However, their shapes remained unchanged. The comparison with the analytical model showed reasonably a good agreement to within 2%. Furthermore, the authors' numerical predictions also showed reasonable agreement with the experimental results previously reported in the literature., Conclusions: The authors' predictions demonstrate the feasibility of their novel probe to achieve reasonable lesion sizes, during hyperthermic or ablative heating using AMF parameters (field strength and frequency) that are acceptable for human use.

Background: Lidocaine hydrochloride (LH) is one of the most extensively used local anesthetics and peripheral analgesics. Availability of a simple and sensitive assay method for this analyte in pharmaceutical preparations as well as development of new voltammetric detectors that can be applied in chromatographic systems for determination of this analyte in biological samples are of great importance., Objectives: In this study, a square-wave voltammetric (SWV) determination of LH at a bare carbon-paste electrode (CPE) was reported. Moreover, the oxidation mechanism for LH molecule at this electrode was investigated., Materials and Methods: The SW voltammogram of LH solution at CPE showed a well-defined peak between +0.80 and +0.88 V depending on a scan rate in potassium nitrate (KNO3) solution. Different chemical and instrumental parameters influencing the voltammetric response, such as the pH level and scan rate were optimized for LH determination., Results: A linear range of 8.0 - 1000.0 μmol L(-1) (r(2) = 0.999) was obtained. The limit of detection (LOD) was 0.29 μmol L(-1). The relative standard deviations of 2.1% obtained for 0.8 800 μmol L(-1) solution of LH indicated a reasonable reproducibility of the method., Conclusions: The results of this study show that LH in different pharmaceutical preparations could be determined with good reliability. In addition, the results reveal that the equal numbers of electrons and protons are involved in the oxidation of LH and the irreversible oxidation of an analyte was performed via amine groups of LH molecule.

Background: Menorrhagia is a common health problem in women, particularly those with bleeding disorders. Little is known about the course of menorrhagia or other bleeding symptoms in women with the most common congenital bleeding disorder, von Willebrand disease (vWD)., Objectives: The aim of this study was to estimate the prevalence of vWD in women with diagnosed menorrhagia., Materials and Methods: In this cross-sectional study, a total of 460 consecutive patients, presenting menorrhagia, were analyzed. The initial screening and confirmation tests for the diagnosis of vWD included determination of prothrombin time (PT), partial thromboplastin time (PTT), bleeding time (BT), fibrinogen, factor VIII, vWF antigen, and vWF activity. A questionnaire was filled for every patient. The data were then analyzed using the SPSS software., Results: Mean age of our patients was 32.5 ± 10.6 years. The level of von Willebrand factor in 22.5% and von Willebrand activity in 19.6% of patients was abnormal. The prevalence of vWD among patients with menorrhagia was 24%., Conclusions: The high prevalence of vWD among our patients was the same as other previous reports, suggesting low awareness about this disease and under diagnosis of mild cases.

Outstanding mechanical properties of biological multilayered materials are strongly influenced by nanoscale features in their structure. In this study, mechanical behaviour and toughening mechanisms of abalone nacre-inspired multilayered materials are explored. In nacre's structure, the organic matrix, pillars and the roughness of the aragonite platelets play important roles in its overall mechanical performance. A micromechanical model for multilayered biological materials is proposed to simulate their mechanical deformation and toughening mechanisms. The fundamental hypothesis of the model is the inclusion of nanoscale pillars with near theoretical strength (σth ~ E/30). It is also assumed that pillars and asperities confine the organic matrix to the proximity of the platelets, and, hence, increase their stiffness, since it has been previously shown that the organic matrix behaves more stiffly in the proximity of mineral platelets. The modelling results are in excellent agreement with the available experimental data for abalone nacre. The results demonstrate that the aragonite platelets, pillars and organic matrix synergistically affect the stiffness of nacre, and the pillars significantly contribute to the mechanical performance of nacre. It is also shown that the roughness induced interactions between the organic matrix and aragonite platelet, represented in the model by asperity elements, play a key role in strength and toughness of abalone nacre. The highly nonlinear behaviour of the proposed multilayered material is the result of distributed deformation in the nacre-like structure due to the existence of nano-asperities and nanopillars with near theoretical strength. Finally, tensile toughness is studied as a function of the components in the microstructure of nacre.

Human parvovirus B19 is a very common viral infection especially in school-aged children. The infection during pregnancy can affect the fetus due to lack of mother's immunity. Although, there is still no evidence of fetal teratogenic effects with parvovirus B19, but non-immune fetal hydrops and abortion may be caused by vertical transmission of the virus during pregnancy. This study was aimed to assess the prevalence of parvovirus B19-specific antibody (IgM) in pregnant women who had a spontaneous abortion. This cross-sectional study was carried out in all pregnant women who referred due to a spontaneous abortion. All demographic information such as age, occupation, and gestational age, last history of abortion, gravity, and presence of children below the age of six was recorded and a blood sample was provided for all the women. Then, the blood samples were tested to assay parvovirus B19-specific antibody (IgM) by EuroImmune ELISA kit. Among 94 pregnant women with the mean age of 28.4 years who had a spontaneous abortion, parvovirus B19 specific antibody (IgM) was detected in 17 participants (18.1%). Meanwhile, 14 women (14.9%) were suspected for presence of the antibody in their blood sample. There was no significant difference between the presence of antibody and age of pregnant women, occupation, gestational age, number of previous abortion, presence of children below the age of six and number of pregnancy. These findings revealed that a high percentage of pregnant women are probably non-immune against parvovirus B19, and also there might be a number of spontaneous abortions in which parvovirus infection caused fetal death.  However, more studies are needed to prove the absolute role of parvovirus B19 in these abortions.

In this paper, molecular dynamic simulation was used to study the effect of water on the equilibrated structure and mechanical properties of cross-linked hydrogel at multiple scales. The hydrogel consisted of Polyethylene glycol diglycidyl ether (PEGDGE) as epoxy and the Jeffamine, poly-oxy-alkylene-amines, as curing agent. The results for systems with various water contents indicated that the cross-links were more hydrophilic within the hydrogel structure. Effects of cross-linking on the transport properties were also investigated by computing diffusion coefficients of water molecules. A new Coarse-Grained (CG) scheme for hydrogels is proposed, and validated by comparing the transport properties with the all-atom method, demonstrating the capability of the model to capture the correct dynamic evolution of the system. The all-atom model of the hydrogel was mapped to the CG model using the MARTINI force field. This method resulted in a more realistic representation of the stiffness of the system, compared to the previous experimental studies in the literature. The variation of the stiffness of the hydrogel as a function of the water content showed that 40% water content is the optimal value for mechanical performance of the hydrogel., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Designing scaffolds to modulate protein adsorption is a key to building advanced scaffolds for tissue regeneration. Protein adsorption to tissue engineering scaffolds is critical in early cell attachment, survival, and eventual proliferation. The goal of this study is to examine the effect of functionalization on fibronectin adsorption to electrospun polycaprolactone (PCL) scaffolds through experimentation using fluorescently labeled fibronectin and to couple this experimental data with analysis of interaction energies obtained through molecular dynamics (MD) simulations to develop a better understanding of the adsorption process. This study is the first to analyze and compare experimental and MD simulation results of fibronectin adsorption on functionalized electrospun PCL scaffolds. Electrospun nanofiber PCL scaffolds were treated with either 1 N NaOH (hydrolyzed) or 46% hexamethylenediamine (HMD) (aminated) solution to be compared with untreated (control) scaffolds. We found that aminated PCL scaffolds experimentally adsorbed more fibronectin than control scaffolds, whereas hydrolyzed scaffolds showed decreased adsorption. MD simulations carried out with NVT ensemble at a temperature of 310 K indicated a higher work of adhesion for both functionalized scaffolds over control. Also, the simulations revealed different conformations of fibronectin on each scaffold type after adsorption, with the arginine-glycine-aspartic acid sequence appearing most accessible on the aminated scaffolds. This suggests that functionalization affects not only the quantity of protein that will adsorb on a scaffold but how it attaches as well, which could affect subsequent cell attachment., (Copyright © 2013 Wiley Periodicals, Inc.)

Background: Nowadays, removal of heavy metals from the environment is an important problem due to their toxicity., Objectives: In this study, a modified method was used to synthesize chitosan-coated magnetite nanoparticles (CCMN) to be used as a low cost and nontoxic adsorbent. CCMN was then employed to remove Hg(2+) from water solutions., Materials and Methods: To remove the highest percentage of mercury ions, the Box-Behnken model of response surface methodology (RSM) was applied to simultaneously optimize all parameters affecting the adsorption process. Studied parameters of the process were pH (5-8), initial metal concentration (2-8 mg/L), and the amount of damped adsorbent (0.25-0.75 g). A second-order mathematical model was developed using regression analysis of experimental data obtained from 15 batch runs., Results: The optimal conditions predicted by the model were pH = 5, initial concentration of mercury ions = 6.2 mg/L, and the amount of damped adsorbent = 0.67 g. Confirmatory testing was performed and the maximum percentage of Hg(2+) removed was found to be 99.91%. Kinetic studies of the adsorption process specified the efficiency of the pseudo second-order kinetic model. The adsorption isotherm was well-fitted to both the Langmuir and Freundlich models., Conclusions: CCMN as an excellent adsorbent could remove the mercury ions from water solutions at low and moderate concentrations, which is the usual amount found in environment.

This paper presents the results of an experimental study to understand the dominant mechanism in bond strength between dental resin agent and zirconia ceramic by investigating the effects of different surface treatments. Effects of two major mechanisms of chemical and micromechanical adhesion were evaluated on bond strength of zirconia to luting agent. Specimens of yttrium-oxide-partially-stabilized zirconia blocks were fabricated. Seven groups of specimens with different surface treatment were prepared. 1) zirconia specimens after airborne particle abrasion (SZ), 2) zirconia specimens after etching (ZH), 3) zirconia specimens after airborne particle abrasion and simultaneous etching (HSZ), 4) zirconia specimens coated with a layer of a Fluorapatite-Leucite glaze (GZ), 5) GZ specimens with additional acid etching (HGZ), 6) zirconia specimens coated with a layer of salt glaze (SGZ) and 7) SGZ specimens after etching with 2% HCl (HSGZ). Composite cylinders were bonded to airborne-particle-abraded surfaces of ZirkonZahn specimens with Panavia F2 resin luting agent. Failure modes were examined under 30× magnification and the effect of surface treatments was analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). SZ and HSZ groups had the highest and GZ and SGZ groups had the lowest mean shear bond strengths among all groups. Mean shear bond strengths were significantly decreased by applying a glaze layer on zirconia surfaces in GZ and SGZ groups. However, bond strengths were improved after etching process. Airborne particle abrasion resulted in higher shear bond strengths compared to etching treatment. Modes of failure varied among different groups. Finally, it is concluded that micromechanical adhesion was a more effective mechanism than chemical adhesion and airborne particle abrasion significantly increased mean shear bond strengths compared with another surface treatments., (© 2013.)

Background: Atrazine (ATZ) is a widely used herbicide in most countries because of its low cost and good selectivity. The concentration of ATZ that the EPA considers safe to consume in drinking water is 3 ppb. Therefore, recently, there have been concerns about its determination in trace levels. This compound is not electro-active, so in this research indirect electrochemical method for its detection in low levels was proposed., Objectives: The main aim of this study is the indirect determination of ATZ in water samples by voltammetry using nano-particle modified electrode., Materials and Methods: A nano-CuO modified carbon paste electrode (NMCPE) is constructed and its application for indirect square wave voltammetric (SWV) detection of ATZ is reported. The sensing performance mechanism of the nano-CuO modified carbon paste electrode toward atrazine is due to complexation of the analyte with Cu (II) ion. The peak current for copper (II) reduction decreases with increase in the ATZ concentration and is monitored for its determination. Instrumental and chemical parameters influencing the detection of ATZ were optimized., Results: The results revealed that decrease in peak current was proportional to ATZ concentration over the range of 5-75 ng/mL. The limit of detection (LOD) and limit of quantification (LOQ) were 2 ng/mL and 5.6 ng/mL (n = 20), respectively. The relative standard deviation (n = 10) for the determination of 10 and 50 ng/mL of ATZ solution was estimated as 4.9% and 4.2 %, respectively., Conclusions: This easily fabricated electrode together with the fast and sensitive SW voltammetry was successfully applied for the determination of concentration of ATZ at trace levels, in different water samples.

Using stainless steel 316L for drug-eluting stents needs specific surface finishing due to corrosion phenomena that take place on the metal surface upon prolonged contact with human tissue. Poly (o-chloro-p-xylylene) (Parylene C) is one of the inert and biocompatible materials that are used for 316L coating with γ-methacryloxypropyltrimethoxysilane as an adhesion promoter. In this study, a combination of atomic force microscopy experiments and contact theories have been used to quantify the work of adhesion between parylene C/316L and silane added parylene C/316L. An atomistic simulation has been used, first, to investigate and compare the adhesion at the room temperature with the experiments and then, to investigate the effect of aqueous environment with higher temperature, inside the body, on the adhesion between layers in the structure of drug eluting stent. The simulation results of simplified model for 316L are in good agreement with the experimental results and suggest that the week affiliation between this polymer and 316L is mainly due to Van der Waals interactions. The effect of temperature on the adhesion is found to be regressive and as the water molecules permeate the polymer the adhesion decreases. They also imply that the effect of silane on the adhesion between parylene C and steel is modest., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

In biological hydrogels, the gel matrix is usually reinforced with micro- or nanofibers, and the resulting composite is tough and strong. In contrast, synthetic hydrogels are weak and brittle, although they are highly elastic. The are many potential applications for strong synthetic hydrogels in medical devices, including as scaffolds for tissue growth. This work describes a new class of hydrogel composites reinforced with elastic fibers, giving them a cartilage-like structure. A three-dimensional rapid prototyping technique was used to form crossed "log-piles" of elastic fibers that are then impregnated with an epoxy-based hydrogel in order to form the fiber-reinforced gel. The fibrous construct improves the strength, modulus and toughness of the hydrogel, and also constrains the swelling. By altering the construct geometry and studying the effect on mechanical properties, we will develop the understanding needed to design strong hydrogels for biomedical devices and soft machines., (Copyright © 2012. Published by Elsevier Ltd.)

Background: Primary retroperitoneal mucinous adenocarcinomas are very rare tumors that resemble ovarian mucinous cystadenocarcinomas., Case: A 39-year-old woman presented with a 20-cm cystic lesion. Following surgery final pathology revealed mucinous adenocarcinoma consistent with a primary retroperitoneal process. The patient responded favorably to 6 cycles of paclitaxel and carboplatin chemotherapy and currently has no evidence of disease., Conclusion: During surgical resection of a primary retroperitoneal mucinous adenocarcinoma, ensuring that the lesion remains intact has clinically significant implications.

Objective: To examine whether dietary supplementation with omega-3 fatty acids relieved symptoms of primary dysmenorrhea., Methods: Women aged 18-22 years with primary dysmenorrhea were enrolled in a double-blind crossover study. Women assigned to group 1 (n=47) received 1 omega-3 capsule daily for 3 months, followed by placebo for 3 months. Women in group 2 (n=48) received placebo for 3 months, followed by omega-3 for 3 months. A washout period was performed in both groups. Participants used 400mg of ibuprofen as a rescue dose if severe menstrual pains were experienced., Results: A marked reduction in pain intensity was observed after 3 months of treatment with omega-3 fatty acids (P<0.05). Women who received omega-3 fatty acids required fewer rescue doses than women who received placebo (P<0.05). The mean numbers of ibuprofen tablets used after 3 months with omega-3 fatty acids were 4.3±2.1 (group 1) and 3.2±2.5 (group 2); the mean numbers of tablets used after 3 months of placebo were 5.3±2.2 (group 1) and 6.0±2.6 (group 2) (P=0.001 for both)., Conclusion: Supplementation with omega-3 fatty acids reduced the symptom intensity of primary dysmenorrhea. Supplementation efficacy was sufficient to decrease the ibuprofen rescue dose., (Copyright © 2011 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.)

Patients on maintenance hemodialysis (MHD) experience decreased quality of life (QoL) and significantly higher rates of malnutrition, inflammation, hospitalization and mortality when compared with the normal population. The dietary approach in the different phases of chronic renal failure is one of the most important, and yet controversial, topics in the whole history of nephrology, even when dialysis facilities were not easily available. Although much progress has been made in recent years in recognizing the link between malnutrition, different diseases and increased mortality, no consensus has yet been reached concerning the ideal assessment and management of nutritional status in dialysis patients in Iran. In this study, 70 patients on MHD in the teaching hospitals in Urmia were divided into two groups and were requested to fill in the validated SF-36 QoL questionnaire. One group of 35 patients received dietary counseling while the other did not and acted as controls. The SF-36, a short-form QoL scoring system consists of 36 questions that are compressed into eight multi-item scales covering all aspects of QoL. The two groups studied were similar in age, level of education, gender and duration of dialysis treatment; 46.8% of the patients were female and 52% were male. The total SF-36 score was slightly higher in males compared with females, but this difference was not statistically significant (P = 0.05). The scores were higher in the group counseled about diet. Overall, the difference in physical health, in work activities and QoL as a whole, between the two groups, was statistically significant (t = 2.04, df = 34, P = 0.049; t = 2.04, df = 34, P = 0.049; t = 2.28, df = 1.96, P = 0.043, respectively). The QoL was considerably diminished in HD patients, but less so in the group that was educated about their nutrition. Improvement in QoL is achievable in patients if their discomfort is more effectively treated medically. One of the methods for this is education about their nutritional program, which can be used for other chronic diseases too. More research is needed to assess whether interventions help to improve QoL and lower heath risks among patients on HD.

Background: The purpose of this study was to explore nurses' attitudes to the barriers of patient education as a right for getting information based on work situation of nurses, educational facilities in hospitals, and patients' situation., Materials and Methods: The study was conducted using a cross-sectional design. The populations consisted of 240 nurses affiliated in the Educational Hospitals. The data were gathered by a questionnaire. Demographic variables and three domains were studied. Twenty questions were about their working situation, 4 questions about hospital educating facilities, and 12 questions were about patients' situation in hospital. The type and frequency of education barriers were evaluated, and variables associated with reporting an obstacle were analyzed., Findings: In our questionnaire, we used a Likert scale for determining severity of three domains as the barriers of patient education that ranged from 0 to 4. Generally, it was obvious that educational condition in our hospitals was not good and most of the nurses believed that patient education is not their duties, facilities in hospitals are not sufficient and shortness of time is the most important cause of insufficiency of patient education., Conclusions: The interactions of patient, physician and systemic factors have implications for the implementation of patient education. The failure of adequate patient education may be attributed to the lack of patient adherence, the failure of nurses' knowledge and skill level or the insufficient funding and organization of necessary programs in the current health care system.

Background: Quality of life (QOL) assessment in patients on chronic Hemodialysis (HD) or peritoneal dialysis (PD) has rarely been carried out. The aim of this study was to assess the quality of life during hemodialysis and peritoneal dialysis treatment in patients referred to teaching hospitals in Urmia, Iran., Methods: All chronic HD and PD patients in Taleghani and Imam Khomeini Teaching Hospitals in Urmia were requested to fill in the validated with a health-related quality-of-life SF36 questionnaire for assessing health status in five dimensions and on a visual analogue scale, allowing computation of a predicted QOL value to be compared., Results: Of the 558 questionnaires distributed to chronic HD patients, 455 were returned (response rate 82%). Fifty out of 64 PD patients (78%) returned the questionnaires. The two groups were similar in age, gender and duration of dialysis treatment. Mean QOL was rated at 60±18 for HD and 61±19 for PD, for a mean predicted QOL value of 62±30 and 58±32(,) respectively. RESULTS of the five dimensions were similar in both groups, except for a greater restriction in usual activities for PD patients (p= 0.007). The highest scores were recorded for self-care, with 71% HD and 74% PD patients reporting no limitation, and the lowest scores for usual activities, with 14% HD and 23% PD patients reporting severe limitation. Experiencing pain/discomfort (for HD and PD) or anxiety/depression (for PD) had the highest impact on QOL., Conclusion: The results show that QOL on PD was better, but such studies have not been performed in various areas in Iran and the results may be different because of the involvement of many factors such as geographical, socioeconomic and cultural items. More studies are required to verify the value of the SF36 measurements in predicting the clinical condition of patients with ESRD and their outcomes.

Objective: A depressive disorder is an illness that involves the body, mood, thoughts and behaviors. This study was performed to identify the presence of depression among medical students of Urmia University of Medical Sciences., Methods: A descriptive cross-sectional study was conducted on 700 undergraduate medical and basic sciences students. Beck depression inventory (BDI) used for data gathering., Results: Mean score of BDI was 10.4 ± 0.8 and 52.6% of students scored under the depression threshold. Four of them had severe depression. RESULTS showed no significant relationship between depression and age, education, sex, rank of birth or duration of education., Conclusion: Prevalence of depression that can affect the students' quality of education and social behavior was high in Urmia University of Medical Sciences.

Background: Burn injuries in many respects is the most tragic that a person may experience. The purpose of this study was to know the burn casualties prevalence in people over 15 years old to identify the risk and predisposing factors in the province of west Azarbaijan of Iran., Methods: This cross-sectional study was performed from March 2008 to March 2010. The demographic and epidemiologic information about burn and its complications were extracted from the data banks and records. Data were collected and analyzed., Results: Four hundred twenty eight patients (44.9% female and 56.1% male) were studied. Most of the admissions were in 16 to 25 years age bracket. Burning with fire accounted (39.2%) of admission in males and (53.2%) in females which was the most common cause of burning. Percentage patients who had more than 40% body surface area (BSA) burned was 42.0% in males, and 30.1% in females. Patients with >40% BSA burn had a mortality of 73.8%. The mean body surface area burned was 33.8% in males and 25.2% in females. The mean duration of hospitalization was 6.19 days., Conclusion: The results of this study show that the prevalence of burn injuries is relatively high with high mortality rate in those with BSA> 40%. The commonest cause of burn was fire.

This paper combines experiments, simulations and analytical modeling that are inspired by the stress reductions associated with the functionally graded structures of the dentin-enamel-junctions (DEJs) in natural teeth. Unlike conventional crown structures in which ceramic crowns are bonded to the bottom layer with an adhesive layer, real teeth do not have a distinct "adhesive layer" between the enamel and the dentin layers. Instead, there is a graded transition from enamel to dentin within a approximately 10 to 100 microm thick regime that is called the Dentin Enamel Junction (DEJ). In this paper, a micro-scale, bio-inspired functionally graded structure is used to bond the top ceramic layer (zirconia) to a dentin-like ceramic-filled polymer substrate. The bio-inspired functionally graded material (FGM) is shown to exhibit higher critical loads over a wide range of loading rates. The measured critical loads are predicted using a rate dependent slow crack growth (RDEASCG) model. The implications of the results are then discussed for the design of bio-inspired dental multilayers.

This method shows a novel, fast and simple solid phase extraction-spectrophotometric procedure for preconcentration and determination of salicylic acid (SA) in blood serum using magnetic iron oxide nanoparticles (MIONs) as extractor. It is shown that the novel magnetic nano-adsorbent is quite efficient for fast adsorption of SA at 25 degrees C. Various parameters affecting the adsorption of SA on MIONs, such as pH of solution, type, volume and concentration of desorbing reagent and amount of adsorbent and matrix effects, have been investigated. The calibration graph for the determination of SA was linear in the range of 0.025-1.250microgmL(-1). The limit of detection (LOD) based on three times the standard deviation of the blank (3S(b)) was 5.5x10(-3)microgmL(-1) (n=10) for SA. The intra-day precision (R.S.D.) was below 10.1% and inter-day R.S.D. was less than 17.5%, while accuracy (relative error R.E.) was within +/-3.6 determined from quality control samples for salicylic acid (SA) which corresponded to requirement of the guidance of Food and Drug Administration (FDA). The preconcentration factor of 100 was achieved in this method. The proposed procedure has been successfully applied to the determination of SA in blood serum.

An atomic force microscopy (AFM) method was developed to quantify the adhesion forces between and cohesive forces within the layers of a drug-eluting stent (DES). Surface pairs representing both the individual components and the complete chemistry of each layer within the DES were prepared. As a model, the CYPHER Sirolimus-eluting Coronary Stent was studied. This DES consists of a stainless steel stent substrate, a parylene C primer layer, and a drug-eluting layer that contains poly(ethylene-co-vinyl acetate), poly(n-butyl methacrylate), and sirolimus (rapamycin). Coated AFM tips and two-dimensional substrates or coupons, which act as surrogates to the CYPHER Stent, were prepared and characterized. The force-displacement measurements were conducted to evaluate the adhesion between the middle parylene C layer and the 316L stainless steel substrate, the adhesion between the parylene C layer and the outer drug-eluting layer, and the cohesion between the three constituents of the drug-eluting layer. The average adhesion forces between the parylene C to drug layer varied from 88 to 167 nN, and the drug layer-to-drug layer interactions were between 194 and 486 nN within the model CYPHER Stent coating. All the adhesion forces measured were larger than those observed for gold-gold interactions, which yielded a pull of force of 19 nN (Zong et al., J Appl Phys 2006;100:104313-104323).

The paper presents a model for contaminant transport and flux through a consolidating subaqueous sediment and overlying cap. The formulation is based on the effect of consolidation and excess pore pressure dissipation on transient, nonlinear advective component of transport through sediment and the cap. The consolidation is induced by the buoyant weight of the cap when it is placed on the contaminated sediments. One equation is presented for advective-diffusive transport through the sediment that is dependent upon soil/contaminant properties and transient advective velocity, which is calculated from a second equation based on the Terzaghi consolidation theory. A third equation is provided to describe the transport of contaminants in the cap. The parameters, including advective velocity, and boundary conditions used for contaminant transport through the cap are derived from the solution of the first two equations. The finite difference method is used to solve the system of equations for consolidation and contaminant transport. A hypothetical case is analyzed to demonstrate the formulation, and the results show that advection due to consolidation can accelerate breakthrough of contaminant through the cap by orders of magnitude. The derivation and results show that consolidation should be included for cap design, and that reactive caps are essential for delaying and reducing dissolved contaminant flux.

Thyroid status and neurologic, psychometric and auditory functions were evaluated in presumably normal schoolchildren aged 6 to 16 years from three areas of iodine deficiency in Iran. The subjects from each area were identified as members of groups A, B or C. In group A there were retarded growth, high prevalence of visible goiter (93%), low T4 (39%) and high TSH (70%). In group B 66% had a visible goiter and 7% had high serum TSH. In group C visible goiter was present in 22% of the subjects but they had normal thyroid function. Urinary iodine excretion was low in all three groups. Head circumference was less in groups A and B, as compared to C. Pyramidal signs occurred in over half of the subjects in Group A (hyperreflexia in 39% and crossed adductor reflex in 29%). The glabellar sign was present in 50% of group A and 20% of group B. Forty-four percent of the subjects in group A and 17% in group B had hearing deficits as shown by audiometry. Psychomotor examination was performed using the Bender Gestalt test. A higher number of errors was evident in groups A and B their psychomotor age was below their chronological age. The results of the Raven test showed mild impairment of IQ in group A, with 55% having an IQ below 91 and 15% less than 70. The subjects in group B had lower IQ than group C, but higher than group A. There was a negative correlation between serum TSH and free thyroid indices and a positive correlation between TSH and the number of pyramidal signs. This study demonstrates that mild to moderate growth retardation and neurological, auditory and psychomotor impairments occur in apparently normal subjects residing in areas of iodine deficiency.