Search

Statement of Problem. Improved mechanical properties of contemporary composites has resulted in the extended use of composites for the restoration of posterior teeth. Although the indication of polymers was extended to metal-free individual crowns, the influence of tooth preparation design and cementation methods on the stability of these artificial crowns remains unknown. Purpose. This in vitro study evaluated the effect of axial tooth preparation design, occlusal dimension, and cementation technique on the fracture resistance of metal-free posterior Artglass crowns. Material and Methods. Seventy-two extracted human third molars, assigned to experimental groups by size, received standardized tooth preparation. Axial tooth preparation included an invasive approach with 1-mm deep shoulder and a less invasive 0.5-mm chamfer preparation, whereas occlusal reduction was either 0.5 mm or 1.3 mm. Artglass crowns that restored the original tooth contour were cemented with 3 cements: zinc phosphate cement (ZnP), glass ionomer cement (GIC), or a resinous cement in combination with a dentinal bonding agent. After 10,000 thermal cycles between 5°C and 55°C, artificial crowns were vertically loaded until compression to failure. Significant differences of fracture loads between experimental groups were assessed by paired Mann-Whitney U tests. Results. Minimal fracture resistance for all combinations excluded 500 N. However, 9 of 24 Artglass crowns cemented with ZnP loosened after thermocycling. Adhesive cementation resulted in a significantly greater fracture resistance compared with GIC and ZnP ( P =.02). Increased occlusal thickness (0.5 to 1.3 mm) resulted in greater stability, whereas a 1-mm deep shoulder tooth preparation did not improve durability compared with a 0.5-mm chamfer finishing line. Conclusion. A minimally invasive 0.5-mm axial chamfer tooth preparation combined with sufficient occlusal reduction and adhesive cementation recorded the greatest stability for posterior metal-free Artglass crowns. (J Prosthet Dent 2000;84:303-8.)

This study determined the variability of temporomandibular joint (TMJ) disk position in medial, central, and lateral aspects of the joint using magnetic resonance imaging (MRI). Subjects had clinical evidence of reciprocal TMJ clicking (N = 123) or restricted mandibular motion (N = 52). Eighty-nine asymptomatic volunteers provided a control group. Disk position was quantified on MRI by measuring the angle formed by a line through the middle of the condyle and perpendicular to the Frankfort plane and a line through the same midpoint of the condyle and tangential to the posterior-most aspect of the disk. The disk position in asymptomatic TMJs varied considerably with a tendency toward farther anterior placement in more lateral images. In 47 TMJs from a total of 52 TMJs (90%), restricted mobility was associated with anterior disk displacement (ADD) without reduction. The disk position demonstrated a mean displacement of 77 degrees without significant differences at the medial and lateral aspects of the condyle. One hundred TMJs from a total of 123 TMJs (81%) with reciprocal clicking demonstrated ADD with reduction. Tomograms revealed larger lateral displacements or rotational displacements in these joints, whereas medial images frequently showed similar ranges of disk positions as compared with asymptomatic TMJs. The results suggest that disk positions of up to +15 degrees on medial tomograms and +30 degrees on lateral tomograms should be regarded as normal variations. Furthermore, multisection analysis of all parasagittal images improved the separation between disk displacement and asymptomatic TMJs.

Objective of this study was to evaluate the diagnostic value of 3-D computed axiography to detect anterior disk displacements (ADD) of the TMJ. 65 patients with MRI confirmed ADD with reduction and 27 patients with ADD without reduction were examined by 3-D computed axiography. 44 healthy volunteers with normal disk position and joint function served as controls. A descriptive analysis of the axiographic opening/closing cycle revealed significantly higher rates of abrupt deviations, accelerations/decelerations, and crossings for ADD with reduction compared to healthy volunteers. A new axiographic index reduced the number of false positive to 10% and false negative to 14% of the diagnosis. ADD without reduction was characterized by significantly shorter opening curves. The optimum split point at 11 mm, resulted in 10% false positive and 20% false negative diagnosis. However, the diagnostic value of computed axiography was reduced by the significant influence of the clicking or limited joint on the contralateral TMJ.

Resin-bonded fixed partial dentures (FPD) with a metal framework have some disadvantages: a grey shimmer of the metal wings through the abutment teeth, a higher corrosion rate, and an allergenic potential of the non-precious alloys used. The Al2O3 ceramic In-Ceram seems to be strong enough to serve as a framework for resinbonded all-ceramic FPDs. Because of the fact that ceramic wings often don't have enough inter-occlusal space, a new preparation design was developed. The objective of this study was to determine the influence of load orientation (45 degrees and 60 degrees) and the design of the interproximal connector on the stress distribution in the bridges. A 3-dimensional finite-element model was developed to simulate the anatomical situation. The biting force was assumed as 250 N and oriented in oro-buccal direction. The loading-point was palatal 1.5 mm beneath the incisal edge. It was found that stress generally increased with an angle of the biting force of 60 degrees. A small interdental connector (3 mm height) and/or strong interdental separation resulted in stresses of up to 455 MPa (45 degrees) or 534 MPa (60 degrees). Less separation with rounded edges and a higher connector (4 mm) reduced the stress to 122 MPa (45 degrees) and 143 MPa (60 degrees). Due to an average tensile strength of In-Ceram at 340-400 MPa, an all-ceramic resin-bonded FPD may only be recommended if the height of the connector could be minimum 4 mm. Rounded edges and little interdental separation are significant for stress reduction.

One hundred forty-one adhesive fixed partial dentures were placed under controlled conditions for a 6-year longitudinal study. The influence of location (anterior/posterior, maxilla/mandible), tooth preparation techniques (retentive/less invasive), and four different methods of metal conditioning (sandblasting/electrolytic etching and/or pyrolytic/tribochemical silane coating) on the survival rate was investigated. Failures (23 of 24) were caused by loss of adhesion at the metal-cement interface. The retentive tooth preparation reduced the risk of failure to almost one twentieth, but the intraoral location did not influence survival time. The effect of silane-coating on longevity was extremely positive and was not reflected by successful retainers.