Search

To evaluate the influence of operator experience on adhesive technique and to assess the clinical performances of two different adhesive systems.90 cervical lesions in 42 subjects, with a mean age of 52.4 years (range between 32-63) were selected. Lesions were divided into two groups according to operator experience (n = 42 restorations performed by a skilled operator, n = 48 restorations performed by five unexperienced operators) and further divided into two subgroups according to the adhesive system used: three-step etch-and-rinse (Optibond FL) or one step self-etch (G-Bond). Adhesives were applied according to manufacturers' instructions. Subjects underwent follow-up at 12, 24, and 36 months and restoration retention, enamel and dentin marginal integrity, marginal discoloration, caries occurrence, post-operative sensitivity, and preservation of tooth vitality were evaluated according to USPSH criteria. ANOVA test was performed to evaluate the influence of the adhesive system, the operator experience, and aging on restorations.Operator experience (expert vs. inexperienced), aging time (12, 24, or 36 months), and the adhesive system (self-etch vs. etch-and-rinse) all affected the results statistically, as did the interaction between the adhesive system and operator experience.

To evaluate the in vitro efficacy of surface coating sealer (SCS) in reducing the amount of water absorption and stain formation in resin composites.To evaluate the amount of water sorption, 40 stainless steel round molds (n=10 per composite) were filled with Filtek Supreme XTE; Venus Diamond; Clearfil Majesty ES-2; Gradia Direct Anterior. Groups were further divided into two subgroups (n=5) according to the presence/absence of SCS (Easy Glaze). Their masses were measured at baseline and reweighed at 1, 4, 12, and 20 weeks. For staining evaluation, 48 resin composite discs, 2 mm-thick, were obtained with the same composites and SCS was applied on a single surface of each sample. After baseline color assessment, samples were immersed in vials containing 5 mL of six different staining solutions. Color evaluation was performed again after 1, 4, 12, and 20 weeks. Three-way ANOVA was performed to evaluate differences in weight gain and color changes (P0.05).A significant protective action of SCS (P0.001), but not of the composites (P= 0.366) was found. Differences in weight and color change were not influenced by the resin composite, but only by the presence of the coating on the surface of the samples. SCS are well-established materials for polishing and protecting composite restorations from water sorption and color changes. Different staining solutions can still produce different effects on resin composite.Surface coating sealers are able to reduce water uptake and discoloration from resin composites, thus leading to less degradation of composite restorations over time.

Purpose The aim of this in vitro study was to assess conversion degree (DC), micro-hardness (MH) and bond strength of two dual-curing resin cements employed under translucent monolithic zirconia irradiated with different time protocols. Methods 84 square shaped samples of 1 mm thickness were prepared from high translucency zirconia blocks and divided into two groups (n = 24) according to the cement employed: (1) Rely-X Ultimate; (2) Panavia SA. Each group was further divided into 3 subgroups (n = 8) according to the irradiation time: (a) no light; (b) 20 s; (c) 120 s. Light curing was performed 60 s after the sample was placed on the diamond support of a FT-IR spectrophotometer with a high power multiLED lamp. Final DC% were calculated after 10 min. After 24 h, Vickers Test on the cement layer was performed. The same protocol was used to lute composite cylinders in order to evaluate microshear bond-strength test. ANOVA and Bonferroni tests were performed to find differences between MH and bond-strength to zirconia, while for DC% the Scheirer–Ray–Hare two-way test was used. Results The two cements reached higher DC% in subgroup (b) and (c). As concern MH, statistics showed an increase in curing time was able to improve MH significantly. Bond-strength was not affected by irradiation time only for Panavia SA. Conclusions The first null hypothesis has to be rejected since DC% and MH of the dual-cements tested were influenced by the curing time. The second null hypothesis is partially rejected since the bond strength was influenced by the curing time only for Rely-X Ultimate.

The aim of this in vitro study was evaluate the effect of application of synthetic hydroxyapatite on fiber post bond strength to radicular dentine. Forty, single-root teeth were endodontically treated and an 8 mm post space was prepared. Specimens were randomly placed in four groups (n = 10 in each) and treated using the following fiber post luting procedures: group 1, 17% EDTA + Panavia SA; group 2, 17% EDTA + Teethmate Desensitizer + Panavia SA; group 3, All-Bond Universal + Duo-Link Universal; and group 4, All-Bond Universal + Teethmate Desensitizer + Duo-Link Universal. Fiber posts were luted in the post space and light-cured for 120 s using a light-emitting diode (LED) lamp. After 7 d of storage at 37°C, the teeth were cut into 1-mm-thick slices, which were subjected to a push-out test until failure using a universal testing machine. Two specimens per group were prepared for scanning electron microscopy analysis. An energy-dispersive X-ray spectroscopy detector was used for elemental analysis of the specimen surface. The results were statistically analyzed using one-way anova. The fiber post bond strength was statistically significantly increased after the application of Teethmate Desensitizer to post space walls, either with a 10-MDP-containing self-adhesive cement or with a universal adhesive. Scanning electron microscopy and EDAX analysis showed that Teethmate Desensitizer created a calcium phosphate precipitate over post space dentinal tubules, which significantly improved the bond strength of the fiber post luted with 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing adhesive systems.

Introduction A coronal seal is fundamental for a positive outcome to endodontic therapy. In this in vitro study, we evaluated the adaptation of composite resins in postendodontic restorations using optical coherence tomographic (OCT) imaging. Our null hypothesis was that there would be no difference in marginal adaptation to the pulp chamber floor between resin composites of different viscosities. Methods Thirty intact upper molars extracted for periodontal reasons were selected, endodontically treated, and filled with gutta-percha. The excess gutta-percha was entirely removed from the pulp chamber floor, and teeth were randomly divided into 3 groups (n = 10) according to the material used for the restoration: group 1: 0.5-mm horizontal layer of flowable composite followed by nanohybrid composite, group 2: bulk layering of bulk fill flowable composite; and group 3: oblique layering of nanohybrid composite. The degree of adaptation to the cavity floor was assessed using OCT imaging, and images were analyzed with the software program ImageJ (National Institutes of Health, Bethesda, MD) to assess the marginal gap between the composite and the pulp chamber floor. Collected data were statistically analyzed using analysis of variance testing, and statistical significance was set at P

Purpose: To evaluate the influence of a three-step etch-and-rinse versus a two-step self-etch adhesive system on immediate post-operative sensitivity. Methods: In total, 204 subjects with one posterior tooth affected by a primary carious lesion were recruited. The subjects were randomly divided into two groups, based on the two multi-step adhesive systems used: Group A (All Bond 3) and Group B (Clearfil Protect Bond). The same skilled operator carried out the restorations using a nano-hybrid composite (Venus Diamond) in oblique stratification. Each increment was light-cured for 20 seconds with a LED lamp (Translux Power Blue). Subjects received a three-level thermal sensitivity questionnaire for post-operative sensitivity ratings. The evaluations were recorded daily for 7 days. Scores were analyzed using the McNemar test and postoperative trends were analyzed with the Friedman test (P< 0.05). All (100%) enrolled subjects completed the follow-up visits. There was no statistically significant difference between the two groups in post-operative sensitivity trends. In both groups, increased post-operative sensitivity was found at Dl, which then decreased significantly during the observation period. Results: The results of this in vivo study showed that both of the tested adhesives, etch-andrinse or self-etch, provided effective dentin sealing, preventing subjects from experiencing post-operative sensitivity in the treatment of medium-depth cavities.

Objective: The aim of this in vitro study was to evaluate the marginal sealing ability of a bulk fill flowable resin composite on both enamel and dentin substrates. Materials and Methods: 48 non-carious molars were selected and four Class-V cavities were prepared at the CEJ of each sample. Cavities were filled with Venus Diamond (Heraeus Kulzer); Venus Diamond Flow (Heraeus Kulzer) and Surefil SDR (Dentsply). Samples were divided into two groups: First group samples were immersed in a methylene blue solution for 30 min at 25°C. Second group samples were artificially aged and then treated with methylene blue. Samples were sectioned in the center of the restoration and observed with a 40x stereomicroscope, and the percentage of cavity infiltration was calculated. Results: Results were analyzed statistically by ANOVA (P < 0.05). The amount of infiltration was significantly lower for the enamel substrate compared with dentin (P = 0.0001) and in samples immediately immersed in methylene blue compared with those that were artificially aged (P = 0.011). The interaction between the composite material and the marginal substrate significantly affected dye penetration (P = 0.006). Conclusions: Bulk fill flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins. Bulk fills flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins.