Search

Focusing on thin sheet high-speed laser welding, this study used 0.19- and 0.21- mm-thick, chromium-plated sheet as the research object and studied influences of the elongated spot length on the thin sheet laser welding speed when adopting butt joint welding by different focus elongated spot patterns from both theoretical and experimental points of view. It showed from the test result that compared with the normal spot pattern, the welding speed was increased by 41.6% for 0.19-mm-thick, chromium-plated sheet when the laser power was 1.5 kW and elongated spot length was 4.3 mm, while the welding speed was increased by 30.5% for 0.21-mm-thick, chromium-plated sheet upon elongated spot butt joint welding. Furthermore, compared with the normal spot pattern, sagging of the weld joint end face resulted by the elongated spot would be greatly reduced. Thus, it was clear that the welding speed for the thin sheet could be increased with the weld joint quality improved when the suitable elongated spot pattern was adopted. [ABSTRACT FROM AUTHOR]

Electrodes with different W additives for hardfacing the workpieces of high-carbon alloy steel were developed. The microstructure was observed by optical microscopy and field emission scanning electron microscope equipped with energy-dispersive X-ray spectrometry. The phase structure was determined by X-ray diffraction. The hardness and wear resistance, respectively, of the hardfacing surface layer were measured. The relative curve between mass fraction of each phase and temperature was calculated by Thermo-Calc. The results show that, the microstructure of the hardfacing surface layer without W additive consists of α-Fe, γ-Fe, M7C3, and M23C6 carbides. However, MC carbide initiates in the hardfacing surface layer and its amount increases with the increase of W additive, while that of M7C3 decreases. With the increase of W additive, the hardness and wear resistance of the hardfacing surface layer both increase, and they are the largest when the W additive is 4 wt-%. The C content of the martensite matrix decreases gradually with the increase of W additive. Moreover, only elements C and W exist in MC carbide. With the increase of W content in the hardfacing surface layer, the starting precipitation temperature and the largest mass fraction of MC both increase. However, those of M7C3 both decrease. [ABSTRACT FROM AUTHOR]

This study investigated the antipathogenic activity and probiotic potential of indigenous lactic acid bacteria (LAB) isolated from Chinese homemade pickles. In total, 27 samples were collected from different sites in China. Fifty-nine yielded pure colonies were identified by 16S rRNA gene sequencing as LAB and were initially evaluated for the antibacterial activity in vitro. Initial screening yielded Lactobacillus plantarum GS083, GS086, and GS090, which showed a broad-spectrum antibacterial activity against food-borne pathogens, especially multidrug-resistant pathogens. Meanwhile, organic acids were mainly responsible for the antimicrobial activity of the LAB strains, and the most abundant of these was lactic acid (19.32 ± 0.95 to 24.79 ± 0.40 g/l). Additionally, three L. plantarum strains demonstrated several basic probiotic characteristics including cell surface hydrophobicity, autoaggregation, and survival under gastrointestinal (GI) tract conditions. The safety of these isolates was also evaluated based on their antibiotic susceptibility, hemolytic risk, bile salt hydrolase activity, and existence of virulence or antibiotic resistance genes. All strains were safe at both the genomic and phenotypic levels. Therefore, L. plantarum GS083, GS086, and GS090 are fairly promising probiotic candidates and may be favorable for use as preservatives in the food industry.

The nitro group of 2-nitroimidazole (NIM) enters the tumor cells and is bioreductively activated and fixed in the hypoxia cells. 1,4,8,11-tetraazacyclotetradecane (N4) has shown to be a stable chelator for 99mTc. The present study was aimed to develop 99mTc-cyclam-2-nitroimidazole (99mTc-N4-NIM) for tumor hypoxia imaging. N4-NIM precursor was synthesized by reacting N4-oxalate and 1,3-dibromopropane-NIM, yielded 14% (total synthesis). Cell uptake of 99mTc-N4-NIM and 99mTc-N4 was obtained in 13762 rat mammary tumor cells and mesothelioma cells in 6-well plates. Tissue distribution of 99mTc-N4-NIM was evaluated in breast-tumor-bearing rats at 0.5–4 hrs. Tumor oxygen tension was measured using an oxygen probe. Planar imaging was performed in the tumor-bearing rat and rabbit models. Radiochemical purity of 99mTc-N4-NIM was >96% by HPLC. Cell uptake of 99mTc-N4-NIM was higher than 99mTc-N4 in both cell lines. Biodistribution of 99mTc-N4-NIM showed increased tumor-to-blood and tumor-to-muscle count density ratios as a function of time. Oxygen tension in tumor tissue was 6–10 mmHg compared to 40–50 mmHg in normal muscle tissue. Planar imaging studies confirmed that the tumors could be visualized clearly with 99mTc-N4-NIM in animal models. Efficient synthesis of N4-NIM was achieved. 99mTc-N4-NIM is a novel hypoxic probe and may be useful in evaluating cancer therapy.

The purpose of this study was to develop an efficient way to synthesize 99mTc-O-[3-(1,4,8,11-tetraazabicyclohexadecane)-propyl]-tyrosine (99mTc-N4-Tyrosine), a novel amino acid-based radiotracer, and evaluate its potential in breast cancer gamma imaging. Precursor N4-Tyrosine was synthesized using a 5-step procedure, and its total synthesis yield was 38%. It was successfully labeled with 99mTc with high radiochemical purity (>95%). Cellular uptake of 99mTc-N4-Tyrosine was much higher than that of 99mTc-N4 and the clinical gold standard 18F-2-deoxy-2-fluoro-glucose (18F-FDG) in rat breast tumor cells in vitro. Tissue uptake and dosimetry estimation in normal rats revealed that 99mTc-N4-Tyrosine could be safely administered to humans. Evaluation in breast tumor-bearing rats showed that although 99mTc-N4-Tyrosine appeared to be inferior to 18F-FDG in distinguishing breast tumor tissue from chemical-induced inflammatory tissue, it had high tumor-to-muscle uptake ratios and could detect breast tumors clearly by planar scintigraphic imaging. 99mTc-N4-Tyrosine could thus be a useful radiotracer for use in breast tumor diagnostic imaging.

Objective. This study was aimed to study tissue distribution and tumor imaging potential of 68Ga-glycopeptide (GP) in tumor-bearing rodents by PET. Methods. GP was synthesized by conjugating glutamate peptide and chitosan. GP was labeled with 68Ga chloride for in vitro and in vivo studies. Computer outlined region of interest (counts per pixel) of the tumor and muscle (at the symmetric site) was used to determine tumor-to-muscle count density ratios. To ascertain the feasibility of 68Ga-GP in tumor imaging in large animals, PET/CT imaging of 68Ga-GP and 18F-FDG were conducted in New Zealand white rabbits bearing VX2 tumors. Standard uptake value of tumors were determined by PET up to 45 min. To determine blood clearance and half-life of 68Ga-GP, blood samples were collected from 10 seconds to 20 min. Results. Radiochemical purity of 68Ga-GP determined by instant thin-layer chromatography was >95%. Tumor uptake values (SUV) for 68Ga-GP and 18F-FDG in New Zealand white rabbits bearing VX2 tumors were 3.25 versus 7.04. PET images in tumor-bearing rats and rabbits confirmed that 68Ga-GP could assess tumor uptake. From blood clearance curve, the half-life of 68Ga-GP was 1.84 hr. Conclusion Our data indicate that it is feasible to use 68Ga-GP to assess tumor angiogenesis.