Search

The evolutions of dielectric barrier discharge (DBD) plasma induced starting vortex and the transformation of the DBD plasma induced flow field at different operating pressures are obtained by particle image velocimetry. The results show that the starting vortex will diffuse to the embedded electrode side and then disappear, and the diffusivity will decrease as the time goes on at high operating pressure. But the starting vortex will not change in location, and it will not disappear at low operating pressure. As the operating pressure decreases, the starting time of plasma induced flow field decreases, the ordinate orientation of the induced flowfield increases, and the landscape orientation of the induced flowfield decreases. The form of the induced streamline will come through L→U→V as the pressure decreases. There is no induced vortex in the form of L. There are two induced vortexes in the form of U which lay in the middle and on the right hand of the form U respectively, and there is one induced vortex in the form of V which lays in the middle of form V.

The organic gel propellants have the advantages of both solid and liquid propellant, but the catching fire and burning process of organic gel droplet appears obvious vapor ejection and flame disturbance. This unsteady combustion phe- nomenon of organic gel droplet is different from the quasi-steady combustion of conventional liquid droplet and produces great influence on the spray combustion flow field of gel liquid rocket engine and its optimization design. Based on the un- steady evaporation characteristics inside UDMH (unsymmetrical dimethylhydrazine) organic gel droplet and the micro molecule structure of organic gel propellant, three kinds of liquid phase evaporation model, the unsteady multicomponent evaporation model, the interface tracking multiphase flow evaporation model and the discrete element multiphase flow evaporation model, are proposed. The unsteady multicomponent evaporation model regards the gel droplet as a binary multi- conponent droplet, in which the gellant inside the gel droplet is been equivalent to a species with low volatility and high boiling temperature. In order to depict the shape and location variety of vapor bubble inside the gel droplet more precisely, the interface tracking multiphase flow evaporation model regards the gel droplet and the vapor bubble inside it as a single fluid, and uses the Level Set function tracking the interface location of vapor bubble. Based on the micro molecule structure of organic gel propellant, the discrete element multiphase flow evaporation model for the gel droplet regards the gellant and vapor bubble as the aggregation of micro-particles with different properties respectively, and uses the Lagrange method tracking the movement and aggregation of each kind micro-particle. The multicomponent evaporation model has been im- plemented in our foregoing work, so a summary of the model is presented. And next the main difficulties and the technique preparation about the last two multiphase flow models have been presented and analyzed in detail. In view of mixing and combustion process of gas phase surrounding the UDMH organic gel droplet, we propose that the finite rate chemical reac- tion model and the flamelet model should be used for the stagnation ambient and convective ambient respectively. The diffi- culties and numerical methods for handling the stiff chemical source term in finite rate chemical reaction model have been presented. And next the consistent flamelet model which takes consideration of species diffusion coefficient and non-unity Lewis number is presented. It would be more precise for the temperature and species interpolation of the gel droplet laminar non-premixed combustion flow field. Keywords organic gel; droplet; evaporation model; finite rate chemistry model; flamelet model; stiff source term

The experiments to generate vortices continuously using sub-microsecond pulsed surface dielectric barrier discharge (SDBD) actuator are conducted by particle image velocimetry (PIV). The double-frequencies actuation mode is presented which includes repetitive pulse frequency and vortex frequency. It is found that the empty zone of PIV particles appears in the place where the particles are quite few even nil during the experiments. When discharges occur the primary empty zone is produced by the micro explosion due to the released heat of plasma, and when discharges end the secondary empty zone appears. The induced flow is farther apart form wall and the influence of wall friction should be suppressed due to primary empty zone. When the secondary empty zone on the left side of actuator exposed electrode is blown away completely, the next actuation can start. In order to control the flow more effectively, the pulse voltage with higher repetitive frequency should be applied. The pulse number during one vortex time should be more than 10. As the pulse number increases, the maximal velocity of induced flow increases but the momentum transfer efficiency decreases. The mechanisms releasing heat and body force can be triggered by using the sub-microsecond pulse SDBD actuator.

Gel propellant has the advantage of controllable flux as liquid propellant and long-term reservation as solid propellant, however, the evaporation and combustion problem of gel spray droplet bores with the gel propellant development and combustor design all the time, and hampers gel propellant practical engineering applications. In this paper, the gel single droplet combustion experiment system is designed and constructed, and then the evaporation and combustion mechanism is explored deeply based on the experimental phenomena of organic gel unsymmetrical dimethylhydrazine (UDMH) single droplet burning in nitrogen tetroxide. The organic gel spray droplet multi-component evaporation model is developed for three different evaporation phases of the gel layer, i.e. the forming, expanding and bursting of the gel layer based on the single droplet evaporation characteristics in experiment, and then the gel single droplet vaporization in high temperature gas phase is numerically simulated and compared with the result of conventional liquid droplet using the elementary model parameters and physic property parameters. The result shows that the gel content on the droplet surface increases slowly at the beginning of evaporation, however it would increase rapidly to a mass fraction of 95% and form the gel layer in a limited time after exceeding a critical evaporation time, which results in surface mass flux dropping to 0 and surface temperature reaching the UDMH boil point rapidly. After the gel layer forming, the droplet radius and surface UDMH vapor mass fraction exhibit oscillation as the swelling-bursting phenomena in experiment. The gel droplet surface temperature holds above the boil point and the mass flux of gel droplet inner boiling evaporation is stronger than the conventional liquid droplet surface steady evaporation which makes the life time of gel droplet much shorter.

Based on the physical processes of dielectric barrier discharge (DBD) and quasi-direct-current (quasi-DC) discharge, the plasma aerodynamic actuation mechanism is analyzed, then the numerical model of plasma aerodynamic actuation is founded, finally the DBD and the quasi-DC discharge plasma flow control processes are simulated in the cases of low velocity and high velocity. The results show that the aerodynamic actuation mechanism of DBD plasma is that the discharge changes three kinds of forces in continuum fluent medium, these being shear stress caused by Newton friction, body force caused by electro hydrodynamic and impulsive active force caused by pressure change, and the main aerodynamic actuation mechanism of DBD plasma is body force caused by electro hydrodynamic. The effect of body force is stronger in near space than in the sea level, plasma induced flow velocity increases in near space. The main aerodynamic actuation mechanism of quasi-DC discharge plasma in supersonic air flow is the thermal mechanism of heat plasma, the exploding wires diathermanous model found in this paper is good for the simulation of the process of surface quasi-DC discharge plasma incident shock. The effect of quasi-DC discharge plasma on the supersonic flow field is conform with the effect of protuberance with a bevel to the supersonic flow field, so it can be used to control the shock wave in supersonic aircraft.