Search

High-performance p-channel transistors are crucial to implementing efficient complementary circuits in wide-bandgap electronics, but progress on such devices has lagged far behind their powerful electron-based counterparts due to the inherent challenges of manipulating holes in wide-gap semiconductors. Building on recent advances in materials growth, this work sets simultaneous records in both on-current (10 mA/mm) and on-off modulation (four orders) for the GaN/AlN wide-bandgap p-FET structure. A compact analytical pFET model is derived, and the results are benchmarked against the various alternatives in the literature, clarifying the heterostructure trade-offs to enable integrated wide-bandgap CMOS for next-generation compact high-power devices.

The long-missing polarization-induced two-dimensional hole gas is finally observed in undoped gallium nitride quantum wells. Experimental results provide unambiguous proof that a 2D hole gas in GaN grown on AlN does not need acceptor doping, and can be formed entirely by the difference in the internal polarization fields across the semiconductor heterojunction. The measured 2D hole gas densities, about $4 \times 10^{13}$ cm$^{-2}$, are among the highest among all known semiconductors and remain unchanged down to cryogenic temperatures. Some of the lowest sheet resistances of all wide-bandgap semiconductors are seen. The observed results provide a new probe for studying the valence band structure and transport properties of wide-bandgap nitride interfaces, and simultaneously enable the missing component for gallium nitride-based p-channel transistors for energy-efficient electronics., Comment: 20 pages, 4 + 2 figures

Chiral magnetic Mn$_x$Fe$_{1-x}$Ge compounds have an antisymmetric exchange interaction that is tunable with the manganese stoichiometric fraction, $x$. Although millimeter-scale, polycrystalline bulk samples of this family of compounds have been produced, thin-film versions of these materials will be necessary for devices. In this study, we demonstrate the growth of epitaxial Mn$_x$Fe$_{1-x}$Ge thin films on Si (111) substrates with a pure B20 crystal structure in the stoichiometric fraction range x from 0 to 0.81. Following systematic physical and magnetic characterization including microwave absorption spectroscopy, we quantify the antisymmetric exchange interaction and helical period as a function of $x$, which ranges from 200 nm to 8 nm. Our results demonstrate an approach to engineering the size of magnetic skyrmions in epitaxial films that are grown using scalable techniques., Comment: 21 pages including supporting materials, 9 figures total

Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojunction lattice and strain profiles with sub-picometer precision and to identify dislocations and out-of-plane ripples. We collected diffraction patterns from a focused electron beam for each real-space scan position with a high-speed, high dynamic range, momentum-resolved detector - the electron microscope pixel array detector (EMPAD). The resulting four-dimensional (4D) phase space datasets contain the full spatially resolved lattice information of the sample. By using this technique on tungsten disulfide (WS2) and tungsten diselenide (WSe2) lateral heterostructures, we have mapped lattice distortions with 0.3 pm precision across multi-micron fields of view and simultaneously observed the dislocations and ripples responsible for strain relaxation in 2D laterally-epitaxial structures.

Aberration-corrected optics have made electron microscopy at atomic-resolution a widespread and often essential tool for nanocharacterization. Image resolution is dominated by beam energy and the numerical aperture of the lens ({\alpha}), with state-of-the-art reaching ~0.47 {\AA} at 300 keV. Two-dimensional materials are imaged at lower beam energies to avoid knock-on damage, limiting spatial resolution to ~1 {\AA}. Here, by combining a new electron microscope pixel array detector with the dynamic range to record the complete distribution of transmitted electrons and full-field ptychography to recover phase information from the full phase space, we increased the spatial resolution well beyond the traditional lens limitations. At 80 keV beam energy, our ptychographic reconstructions significantly improved image contrast of single-atom defects in MoS2, reaching an information limit close to 5{\alpha}, corresponding to a 0.39 {\AA} Abbe resolution, at the same dose and imaging conditions where conventional imaging modes reach only 0.98 {\AA}.

What does the diffraction pattern from a single atom look like? How does it differ from the scattering from long range potential? With the development of new high-dynamic range pixel array detectors to measure the complete momentum distribution, these questions have immediate relevance for designing and understanding momentum-resolved imaging modes. We explore the asymptotic limits of long range and short range potentials. We use a simple quantum mechanical model to explain the general and asymptotic limits for the probability distribution in both and real and reciprocal space. Features in the scattering potential much larger than the probe size cause the bright-field disk to deflect uniformly, while features much smaller than the probe size, instead of a deflection cause a redistribution of intensity within the bright-field disk. Because long range and short range features are encoded differently in the diffraction pattern, it is possible to separate their contributions in differential phase contrast (DPC) or Center-of-Mass (CoM) imaging. The shape profiles for atomic resolution CoM imaging are dominated by the shape of the probe gradient and not the highly-singular atomic potentials or their local fields. Instead, only the peak height shows an atomic-number sensitivity, whose precise dependence is determined by the convergence angle. At lower convergence angles, the contrast oscillates with increasing atomic number, similar to bright field imaging. The range of collection angles impacts DPC and CoM imaging differently, with CoM being more sensitive to the upper cutoff limit, while DPC is more sensitive to the lower cutoff., Comment: 16 pages, 9 figures

Epitaxial La doped BaSnO3 films were grown in an adsorption controlled regime by molecular beam epitaxy, where the excess volatile SnOx desorbs from the film surface. A film grown on a (001) DyScO3 substrate exhibited a mobility of 183 cm^2 V^-1 s^-1 at room temperature and 400 cm^2 V^-1 s^-1 at 10 K, despite the high concentration (1.2x10^11 cm^-2) of threading dislocations present. In comparison to other reports, we observe a much lower concentration of (BaO)2 Ruddlesden Popper crystallographic shear faults. This suggests that in addition to threading dislocations that other defects possibly (BaO)2 crystallographic shear defects or point defects significantly reduce the electron mobility.

We present the first release of the Czech Variable star catalogue that currently contains 1228 stars whose variability was discovered by 60 Czech observers. The catalogue contains confirmed variable stars of various types, but also candidates. We give precise coordinates, cross identification with other catalogues, information about constellation, variability type, brightness, light elements, name of the discoverer and year of discovery. In eighty-eight percent of stars the variability type is estimated, for more than 60 % of the stars the light ephemerides are given., Comment: 42 pages, 4 tables, 2 figures, Published in OEJV

Semiconductor heterostructures have played a critical role as the enabler for new science and technology. The emergence of transition metal dichalcogenides (TMDs) as atomically thin semiconductors has opened new frontiers in semiconductor heterostructures either by stacking different TMDs to form vertical heterojunctions or by stitching them laterally to form lateral heterojunctions via direct growth. In conventional semiconductor heterostructures, the design of multi-junctions is critical to achieve carrier confinement. Analogously, we report successful synthesis of monolayer WS2/WS2(1-x)Se2x/WS2 multi-junction lateral heterostructure via direct growth by chemical vapor deposition. The grown structures are characterized by Raman, photoluminescence, and annular dark-field scanning transmission electron microscopy to determine its lateral compositional profile. More importantly, using microwave impedance microscopy, we demonstrate that the local photoconductivity in the alloy region can be tailored and enhanced by 2 orders of magnitude over pure WS2. Finite element analysis confirms that this effect is due to the carrier diffusion and confinement into the alloy region. Our work exemplifies the technological potential of atomically thin lateral heterostructures in optoelectronic applications., Comment: 15 pages, 3 figures, just accepted by Advanced Materials

Epitaxy forms the basis of modern electronics and optoelectronics. We report coherent atomically-thin superlattices, in which different transition metal dichalcogenide monolayers--despite large lattice mismatches--are repeated and integrated without dislocations. Grown by a novel omnidirectional epitaxy, these superlattices display fully-matched lattice constants across heterointerfaces while maintaining a surprisingly isotropic lattice structure and triangular symmetry. This strong epitaxial strain is precisely engineered via the nanoscale supercell dimensions, thereby enabling broad tuning of the optical properties and producing photoluminescence peak shifts as large as 250 meV. We present theoretical models to explain this coherent growth as well as the energetic interplay governing the flat-rippled configuration space in these strained monolayers. Such coherent superlattices provide novel building blocks with targeted functionalities at the atomically-thin monolayer limit., Comment: 4 main figures and 11 supplementary figures

Two-dimensional (2D) materials are among the most promising candidates for next-generation electronics due to their atomic thinness, allowing for flexible transparent electronics and ultimate length scaling. Thus far, atomically-thin p-n junctions, metal-semiconductor contacts, and metal-insulator barriers have been demonstrated. While 2D materials achieve the thinnest possible devices, precise nanoscale control over the lateral dimensions is also necessary. Here, we report the direct synthesis of sub-nanometer-wide 1D MoS2 channels embedded within WSe2 monolayers, using a dislocation-catalyzed approach. The 1D channels have edges free of misfit dislocations and dangling bonds, forming a coherent interface with the embedding 2D matrix. Periodic dislocation arrays produce 2D superlattices of coherent MoS2 1D channels in WSe2. Using molecular dynamics simulations, we have identified other combinations of 2D materials where 1D channels can also be formed. The electronic band structure of these 1D channels offer the promise of carrier confinement in a direct-gap material and charge separation needed to access the ultimate length scales necessary for future electronic applications., Comment: 22 pages main manuscript and methods, 4 main figures, 30 pages supplementary materials, 16 extended figures

Topological crystalline insulators have been recently predicted and observed in rock-salt structure SnSe $\{111\}$ thin films. Previous studies have suggested that the Se-terminated surface of this thin film with hydrogen passivation, has a reduced surface energy and is thus a preferred configuration. In this paper, synchrotron-based angle-resolved photoemission spectroscopy, along with density functional theory calculations, are used to demonstrate conclusively that a rock-salt SnSe $\{111\}$ thin film epitaxially-grown on \ce{Bi2Se3} has a stable Sn-terminated surface. These observations are supported by low energy electron diffraction (LEED) intensity-voltage measurements and dynamical LEED calculations, which further show that the Sn-terminated SnSe $\{111\}$ thin film has undergone a surface structural relaxation of the interlayer spacing between the Sn and Se atomic planes. In sharp contrast to the Se-terminated counterpart, the observed Dirac surface state in the Sn-terminated SnSe $\{111\}$ thin film is shown to yield a high Fermi velocity, $0.50\times10^6$m/s, which suggests a potential mechanism of engineering the Dirac surface state of topological materials by tuning the surface configuration., Comment: 12 pages, 13 figures, supplementary materials included

Although chiral magnetic materials have emerged as a potential ingredient in future spintronic memory devices, there are few comprehensive studies of magnetic properties in scalably-grown thin films. We present growth, systematic physical and magnetic characterization, and microwave absorption spectroscopy of B20 FeGe thin films. We also perform micromagnetic simulations and analytical theory to understand the dynamical magnetic behavior of this material. We find magnetic resonance features in both the helical and field-polarized magnetic states that are well explained by micromagnetic simulations and analytical calculations. In particular, we show the resonant enhancement of spin waves along the FeGe film thickness that has a wave vector matching the helical vector. Using our analytic model, we also describe the resonance frequency of a helical magnetic state, which depends solely on its untwisting field. Our results pave the way for understanding and manipulating high frequency spin waves in thin-film chiral-magnet FeGe near room temperature., Comment: 35 pages total in manuscript format, 5 figures, supporting information

With the decrease of the dimensions of electronic devices, the role played by electrical contacts is ever increasing, eventually coming to dominate the overall device volume and total resistance. This is especially problematic for monolayers of semiconducting transition metal dichalcogenides (TMDs), which are promising candidates for atomically thin electronics. Ideal electrical contacts to them would require the use of similarly thin electrode materials while maintaining low contact resistances. Here we report a scalable method to fabricate ohmic graphene edge contacts to two representative monolayer TMDs - MoS2 and WS2. The graphene and TMD layer are laterally connected with wafer-scale homogeneity, no observable overlap or gap, and a low average contact resistance of 30 k$\Omega$ $\mu$m. The resulting graphene edge contacts show linear current-voltage (IV) characteristics at room temperature, with ohmic behavior maintained down to liquid helium temperatures.

Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180{\deg} tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data., Comment: 3 figures, 10 datasets

Next-generation electronics calls for new materials beyond silicon for increased functionality, performance, and scaling in integrated circuits. Carbon nanotubes and semiconductor nanowires are at the forefront of these materials, but have challenges due to the complex fabrication techniques required for large-scale applications. Two-dimensional (2D) gapless graphene and semiconducting transition metal dichalcogenides (TMDCs) have emerged as promising electronic materials due to their atomic thickness, chemical stability and scalability. Difficulties in the assembly of 2D electronic structures arise in the precise spatial control over the metallic and semiconducting atomic thin films. Ultimately, this impedes the maturity of integrating atomic elements in modern electronics. Here, we report the large-scale spatially controlled synthesis of the single-layer semiconductor molybdenum disulfide (MoS2) laterally in contact with conductive graphene. Transition electron microscope (TEM) studies reveal that the single-layer MoS2 nucleates at the edge of the graphene, creating a lateral 2D heterostructure. We demonstrate such chemically assembled 2D atomic transistors exhibit high transconductance (10 uS), on-off ratios (10^6), and mobility (20 cm^2 V^-1 s^-1). We assemble 2D logic circuits, such as a heterostructure NMOS inverter with a high voltage gain, up to 70, enabled by the precise site selectivity from atomically thin conducting and semiconducting crystals. This scalable chemical assembly of 2D heterostructures may usher in a new era in two-dimensional electronic circuitry and computing.

Intricate biomineralization processes in molluscs engineer hierarchical structures with meso-, nano-, and atomic architectures that give the final composite material exceptional mechanical strength and optical iridescence on the macroscale. This multiscale biological assembly inspires new synthetic routes to complex materials. Our investigation of the prism-nacre interface reveals nanoscale details governing the onset of nacre formation using high-resolution scanning transmission electron microscopy. A wedge polishing technique provides unprecedented, large-area specimens required to span the entire interface. Within this region, we find a transition from nanofibrillar aggregation to irregular early-nacre layers, to well-ordered mature nacre suggesting the assembly process is driven by aggregation of nanoparticles (~50-80 nm) within an organic matrix that arrange in fiber-like polycrystalline configurations. The particle number increases successively and, when critical packing is reached, they merge into early-nacre platelets. These results give new insights into nacre formation and particle-accretion mechanisms that may be common to many calcareous biominerals., Comment: 5 Figures

We describe a hybrid pixel array detector (EMPAD - electron microscope pixel array detector) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128 x 128 pixel detector consists of a 500 um thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit (ASIC). The in-pixel circuitry provides a 1,000,000:1 dynamic range within a single frame, allowing the direct electron beam to be imaged while still maintaining single electron sensitivity. A 1.1 kHz framing rate enables rapid data collection and minimizes sample drift distortions while scanning. By capturing the entire unsaturated diffraction pattern in scanning mode, one can simultaneously capture bright field, dark field, and phase contrast information, as well as being able to analyze the full scattering distribution, allowing true center of mass imaging. The scattering is recorded on an absolute scale, so that information such as local sample thickness can be directly determined. This paper describes the detector architecture, data acquisition (DAQ) system, and preliminary results from experiments with 80 to 200 keV electron beams., Comment: 39 pages total, 11 Figures in Microscopy and Microanalysis, 2015